L E I G H R O U T E RJ O I N E R Y J I G S 2 0 0 7

Joining Tradition With Today

BitsEvery Leigh dovetail jig package includes

three carbide-tipped bits – one straight bit

and two (14º and 8º) dovetail bits. Start

producing through, half-blind and sliding

dovetails right out of the box.

Instructional DVDs Watch and see the ease with which a

Leigh Dovetail jig can produce classic

dovetail joints in minutes by following

simple step-by-step instructions.

Included with every Leigh Dovetail Jig

How to Order: Page 34 2 Simply the best for 25 years!

Welcome to the Leigh 2007 Catalog!Leigh Industries introduced the first ever fully adjustable through

dovetail jig in 1981. Since then, Leigh jigs have set standards against

which all others are measured. Leigh’s passion for innovation and

excellence continues today. Please read on and explore the exciting

joinery possibilities with Leigh jigs.

Leigh Dovetail JigsThe Leigh D4R and D1600 Dovetail jigs are the heart of an incredible joinery system.

Each jig makes easy work of precisely fitted Through, Half-blind or Sliding dovetails

and much more. No other dovetail jigs do so much, so easily and so well. Every Leigh

dovetail jig package contains everything you need to begin producing incredible

joinery...right out of the box!

US Patent no. 4,428,408 CDN Patent no. 1,205,362 EURO Patent no. E0077143

D4R / D1600 Dovetail Jigs

Item D4R-24 24" Leigh Dovetail Jig ..........US$529 ..........CDN

$579Shipping weight 26 lb.

Item D1600 16" Leigh Dovetail Jig ............US$359 ..........CDN

$399Shipping weight 17 lb.

Leigh supplies a 7/16" template guidebush for your router. See pages 20-21 for optionalguides and adaptors for your router. See pages 10-11 for additional bits.

Leigh also offers metric versions of its jigs with alternate shank selection and/or metricscales. Visit our website at leighjigs.com for more details.

Template GuidebushA 7/16" template guidebush is used to

rout all half-blind joints as well as most

through dovetails. Leigh offers a compre-

hensive range of template guide adaptors.

User GuidesLeigh User Guides are simply the best.

Every page offers very detailed images

and clear wording that guides you

through each simple process.

FEATURESMaximum Board Thickness 1-1/2" 1"

Minimum Board Thickness 1/8" 1/8"

Maximum Board Width 24" 16"

Minimum Board Width 1" 7/8"

Through Dovetail Board Thickness 1-1/4" 13/16"

Half-Blind Dovetail Board Thickness 1-1/2" 1"

Clamping Mechanism Cam-Action Speed-Clamps

Clamping Surface Machine Textured

Sliding Dovetails Yes Yes

Rabbeted Half-Blind Dovetails Yes Yes

Inlaid Dovetails Yes Yes

End-On-End Dovetails Yes Yes

Through Dovetail Asymmetrical Yes Yes

Half-Blind Asymmetrical Yes Yes

Simple Angle Joints Yes Yes

Obtuse Angle Joints Yes Limited

Acute Angled Joints Yes Limited

Compound Angled Joints Yes Limited

Needle Pins Yes Yes

Shelf Holes and Shelf Notches Yes Yes

Through and Half-Blind Tail Spacing Infinitely Variable

Through and Half-Blind Tail Sizing Infinitely Variable

Through and Half-Blind Pin Spacing Infinitely Variable

Through and Half-Blind Pin Sizing Infinitely Variable No

Through Dovetail Adjustment For Fit Simple Pin Scale Adjustment

Half-Blind Adjustment For Fit Bit Depth

8mm Shank Bits Yes Yes

Through Dovetail Bits 7 5

Through Dovetail Bits Supplied 1 1

Through Dovetail Straight Bits 3 1

Through Dovetail Straight Bits Supplied 1 1

Half-Blind Bits 5 5

Half-Blind Bits Supplied 2 2

Template Guides 2 1

Template Guides Supplied 1 1

Bridge Piece Material Supplied Supplied

Cross Cut Fence Supplied Supplied

Instructional Video DVD DVD

Fully Illustrated User Guide Yes Yes

Finger Joints with Template Yes Yes

Isoloc Joints with Template Yes Yes

Mortise and Tenon Joints w/Attachment Yes No

D O V E TA I L J I G C O M PA R I S O N

3www.leighjigs.com

How to Order: Page 34 4 Compare and see – no other dovetail jigs have more features!

Textured SurfaceAll clamping surfaces have a machined, non-marring tex-

tured finish. Just clamp your workpiece against this surface

to secure it in position, and rout with confidence!

Dovetail Jig Features and Benefits

Side Stop FrontPerfect joint alignment is guaranteed with precisely

machined in side stops. Accurate wood placement is auto-

matic. Place the workpiece against the side stop, raise the

workpiece up to the finger assembly and press the cam-

action clamp. You are ready to rout.

Side Stop TopLike the front side stops, the top side stops are accurately

machined in the one piece extruded aluminum body. Each

top side stop has an undercut that allows cutting of rabbeted

drawer fronts without the need to offset the tail board.

Cam ClampsThe Leigh D4R and D1600 Jigs come with Cam-Action

Speed-Clamps made from high tech glass-filled nylon, for

years of trouble free service.These rugged easily adjustable

clamps provide amazing holding power. Unlike blister

producing torque knobs, thumb pressure is all you need.

Cross Cut FenceThe ability to rout sliding dovetails is a standard feature

on all Leigh dovetail jigs. The cross cut fence supplied

with the D4R and D1600 jigs allows the user to produce

sliding dovetails in a variety of sizes. You can rout attrac-

tive and strong sliding dovetail joints right out of the box

with the bit included with the jig.

ScalesSimply set the graduated scales on the D4R and D1600

finger assemblies to the joint type and board thickness.

Each scale is color coded and an icon on the scale clearly

shows the part of the joint being routed.

Infinitely Adjustable Guide FingersThe heart of a Leigh dovetail jig is its infinitely adjustable guide finger assembly. The fin-

gers of the D4R and D1600 jigs slide easily along the finger bar and lock securely to cre-

ate a unique joint pattern that perfectly matches the design and scale of your project.

Unlike fixed template jigs, Leigh jigs allow you to position a half pin at either side of

the joint, on any board width. Since each pin guide and its mating tail guide are on

the same guide finger, wherever a pin guide is positioned, the matching tail guide is

automatically set in the correct position at the other end of the finger. The pins will

always align with the sockets. It’s simple and foolproof joint design.

The two-piece fingers of the Leigh D4R allow infinite sizing and spacing of pins and

tails for through and half-blind dovetails. The one-piece design of the D1600 fingers

always maintain the most delicate pin size while still allowing complete flexibility for tail

size, and pin and tail spacing.

Router Vacuum AttachmentWork In a Dust-Free EnvironmentRouters have always been among the shop’s toughest dust

collection challenges. Now however, you can take your router off

the list, at least for Leigh Dovetail Jig work and all your edge rout-

ing chores, thanks to Leigh’s ingenious RVA1 under-the-base dust

extraction system. The RVA1 has a spring loaded roller guided dust

chute that swings in horizontally beneath your router base, sur-

rounding the bit and very effectively giving chips and dust

nowhere else to go. Even a small shop vac can give you nearly dust-

free routing on the Leigh D4R and D1600 Dovetail Jigs as well as

during freehand edge routing. The RVA1 directs your vacuum hose

vertically keeping it clear of jig parts, clamps or other nearby snag

hazards. It fits vacuum hoses with 1-1/16" to 1-1/2" inside diameter.

Will It Fit My Router?The RVA1 is a universal attachment compatible with most

common routers. Router bases must have edge guide rod holes

Item AC4R

The RVA1 quickly attaches to your router to take the mess out of edge routing.

Its adjustable height catcher is ideal for jig and fixture routing.

running through the base, either front to back or side to side, to

accommodate the attachment rods included with the RVA1.

Side-to-side rod holes must have a minimum 5/6" inside

diameter and front to back holes must have at least a 1/4" ID.

Routers with short or blind holes are not compatible with the

RVA1. A special short attachment rod is available for Porter

Cable router models 7529 and 8529.

Save on Accessory Kits! The popular RVA1 Router Vacuum Attachment is

combined with our best Leigh Brand router bit sets, the 11-piece set for

the D4R and the 7-piece set for the D1600. Save on individual prices with

these great accessory kits and get a free bit storage box!

Accessory Kits for the D4R & D1600

Dovetail Jig Accessories

RVA1 Router Vacuum Attachment

5www.leighjigs.com

AC4R and AC1600 Accessory KitsAC4R for the D4R includes the RVA1 router vacuum attachment and the 2411-8 boxed bit set atspecial kit pricing. Save $18 US or $19 CDN

Item AC4R................................................................................US $165 ..............CDN

$179AC1600 for the D1600 includes the RVA1 router vacuum attachment and the 1607-8 boxed bit setat special kit pricing. Save $14 US or $19 CDN

Item AC1600 ..........................................................................US $119 ..............CDN

$129NOTE: See page 11 for bit specification

Features• Fits almost any router with edge guide holes through the base.• Includes 90° mounting adaptor to fit front-to-back guide holes on some P-C, Bosch and Festool routers.• Spring loaded dust chute with roller maintains contact with wood for highly efficient waste capture.• RVA1 connector tube and included step adaptor fits hoses from 1-1/16" to 1-1/2"ID.• Glass-reinforced nylon and aluminum construction.• Chute height is adjustable to fit flush under the base for edge routing, or swing under templates and joinery jig fingers.

Item RVA1 Router Vacuum Attachment ...............................................................................US$44 ........CDN

$49

How to Order: Page 34 6 For more detailed How To’s, visit www.leighjigs.com

Through Dovetails The heart of the D4R and D1600 dovetail jigs is the infinitely adjustable

finger assembly. Arrange the adjustable guide fingers in the desired pin

layout and the tail layout is created automatically and precisely. Making

these strong, beautiful joints on Leigh dovetail jigs is so easy that your

biggest challenge may be remembering to use other kinds of joints.

Whether you’re making a delicate jewelry box with sides just 1/4" thick,

an heirloom blanket chest in 3/4" hardwood or a contemporary dining room

buffet in 1-1/8" exotic timber, the D4R and D1600 let you design aesthet-

ically pleasing joints that suit both the scale and function of the work. Leigh

stocks seven sizes of 8° dovetail bits for Through dovetails giving you

absolute freedom of pin and tail sizing. The D4R handles stock from 1/8"

to 1-1/4" thick, on boards from 1" to 24" wide. The D1600 handles stock

from 1/8" to 1" thick, on boards from 7/8" to 16" wide. Read below to see

how its done!

How to Cut Through Dovetails

Jewelry Box in American black walnut with through dovetails. Karelian burl

top. 13"W x 9"D x 6"H

Cut the Tails Individually adjustable guide fingers let you quickly set up custom layouts to suit your work, and guide finger spacing is infi-nitely variable. Position the finger assembly in the Through dovetail tail mode. Icons identify joint type and the readable scale always faces you. Scalesare color coded grey for Through dovetails. All Through dovetail tails are cut at the same scale setting regardless of board thickness. The supplied tem-plate guidebush and dovetail bit mounted in your router precisely follows the guide fingers, producing perfect Through dovetail tails.

Flipping the finger assembly front to back switches the mode from Tails to Pins.

Cut the Pins Install the included straight bit in your router.The same template guidebush follows the angled guide finger surfaces to cut pinsthat will fit the sockets perfectly, joint after joint. As you can see, there is just one setup of the guide fingers, so perfect pin and socket alignment isguaranteed, no matter what joint layout you have chosen. That’s all there is to it…perfect through dovetails!

Half-Blind Dovetails Half-blind dovetails are used to make strong corner joints, such

as drawer fronts, that are invisible from the front, leaving the

figure of the wood and the design of your furniture uninter-

rupted by exposed end grain. The variable spacing of the jig’s

guide fingers allows you to create sound, classic joints regard-

less of stock width, with half pins at each edge. Half pins at the

ends of a joint are mechanically much stronger than half tails and

therefore the traditional design of choice. Flush or rabbeted half-

blind joints are equally straightforward. With Leigh’s selection

of five half-blind dovetail bits from 8° to 18°, you can produce

pins and tails properly sized to suit the thickness of any pin board.

How to Cut Half-Blind Dovetails

Drawer Case from Cabinetmaker’s Chest in black walnut and maple with half-blind

dovetails. Chest: 9"H x 31"W x 8"D

Cut the Tails Set the scale to the drawer side (tail board) thickness. Use the supplied 7/16" template guidebush and 1/2" dovetail bit to cutboth halves of the joint. Now rout all the half-blind tails. Once again, perfect pin/socket alignment is guaranteed automatically, whatever the layout, becausethere is only one setup of the guide fingers. Note: The plastic bridge piece material shown between the guide fingers comes standard with both jigs.

Flipping the finger assembly front to back switches the mode from Tails to Pins.

Cut the Pins Set the pin scale again to the drawer side (tail board) thickness and rout all the pins. Yes, it’s that simple! Leigh offers fivehalf-blind bits for any drawer-front thickness. See page 11 for selection.

7www.leighjigs.com

Sliding Dovetails

Sliding dovetails are used to create mechanically interlocking joints in fine

furniture and shelving construction. Sliding dovetails are stronger than

dados and unlike ordinary dados, they will hold together without being

glued along the full length of the joint. This makes sliding dovetails ideal

for wide cross-grain assemblies where wood movement must be accom-

modated and controlled.

Leigh dovetail jigs come equipped with a cross cut fence that snaps into

the tail side of the finger assembly. The cross cut fence provides an

adjustable straight guide for routing grooves in horizontal workpieces and

tails in vertical workpieces up to 24" wide on the D4R and 16"wide on the

D1600.

Stock thickness and load bearing stresses on the sliding dovetail joint will

determine the necessary width and depth of the socket and correspond-

ing tail. Generally, the depth of the socket should be about 1/3 of the stock

thickness. A wide range of readily available dovetail bit widths and angles

allow you to create precisely the right size joint for your project.

How to Order: Page 34 8 Sliding dovetails – standard on Leigh Dovetail Jigs

Index card file in white oak with sliding dovetail dividers.

23"W x 14"D x 12"HHow to Cut Sliding Dovetails

Cut the Sockets Set the finger assembly in the half-blind Tail mode. Mark the center of the socket on the edge of the workpiece andclamp the piece horizontally. Using the graduated scales, adjust the cross cut fence to center the bit on your layout line and rout the socket.

Cut the Tails Clamping a tail board vertically and routing one side of the tail, then turning the board around and routing the other side,centers the tail perfectly. Adjust the finger assembly for joint fit as necessary.

When a design calls for discreet, invisible joinery, blind stopped sliding dovetails are just as easy to cut as through joints.

Angled DovetailsCut angled joints just as easily as square corners. Usingshop-made angled clamp jaws, you can rout obtusejoints or even compound angled corners.

End-on-End DovetailsJoining end grain is difficult at best. End-on-enddovetails allow you to create incredibly strong jointswith a decorative touch.

Shelf Pin Holes and NotchesIf you own a plunge router, you can also use theD1600 and D4R’s guide fingers to rout parallel rowsof shelf pin holes in shelving uprights or cabinetsides up to 24" wide. Then, rout notches in the shelfends perfectly aligned to fit over the shelf pins.

Inlaid DovetailsGive your work a distinctive look. Use your favoriteexotic wood as a decorative inlay in through or half-blind dovetails.

Special FunctionsTechnical Bulletins on the following special functionsare available free in the support section of our web-site at leighjigs.com.

Cigar Humidor in English sycamore, madrone burl, cocobolo accents and

spanish cedar lining, with inlaid half-blind dovetails. 6"H x 14"W x 11"D

9www.leighjigs.com

High Quality BitsLeigh Carbide tipped router bits are among the best you can buy.

Our carbide comes from Sandvik of Sweden, the world leading

carbide manufacturer. Each bit is honed with 600 grit diamond

wheels for superbly

smooth, efficient cut-

ting. Shanks are all

1-3/4" long to handle

the thickness of the

finger assembly. All

Leigh bits are manu-

factured using ISO

9002 standards.

Shank SelectionAll Leigh Dovetail jigs are shipped with

superior strength 8mm (5/16") shank router

bits. The larger cross section (58% more mass) of 8mm shank

bits makes them considerably stronger than the smaller 1/4"

shank bits. The result, smoother faster cuts with less chatter

and of course, greater safety. A 1/2" to 8mm collet reducer is

included in every Leigh dovetail package. The collet reducer

simply slips in the 1/2" collet of your router and the 8mm

shank bits fit securely within the collet reducer. A 7/16" OD

guidebush is used with all 8mm shank bits.

How to Order: Page 34 10 Select genuine Leigh brand router bits

Bit Selection

1/4" shank 8mm shank

**

** ** ** **

Bit Selection for Through DovetailsTo match the angle cast into every guide finger, all through dovetails are cut using 8° dovetail bits for tails and one of three straight

bits for pins. Select a dovetail bit from the chart below that has a cutting depth range equal to the thickness of your pin board. Remember,

by choosing the smallest diameter dovetail bit with the correct depth of cut range, you will get the smallest pins possible for the look

of hand-cut elegance. Use the template guidebush and straight bit indicated in the chart. A 1/2", 8° dovetail bit (No.80-8) and a 5/16"

straight bit (No.140-8) are the workhorses used for work up to 13/16" thick. Both bits are standard equipment with Leigh D4R and

D1600 jigs. They are used with the supplied 7/16" o.d. template guidebush, the choice for all bits with 8mm or 1/4" shanks.

These three bits come with the D4R and D1600.

56% more mass

56% more mass

8mm

1/4"Cutting Diameter 5/16" 3/8" 7/16" 1/2" 13/16" 5/16" 1/2"

2"Overall Length 2-1/8" 2-1/4" 2-3/8" 2-9/16" 3" 2-3/4" 3"

Shank Diameter 8mm 1/2" 1/2"

Guidebush Size 7/16"OD 5/8"OD 7/16"OD 5/8"OD

Straight Bits Req’d. Use Leigh No.140-8 Straight Bit Use Leigh No. 150 – –

Shank Length All Shank Lengths are 1-3/4" All Shank Lengths are 1-3/4"

$14 US $ $14 $14 $14 $14 $18 $14 $14$1550 CDN $ $1550 $1550 $1550 $1550 $20

11/16"

2-3/4"

1/2"

5/8"OD

Use Leigh No. 160

$18$20 $1550 $1550

7/16"

1/8"-1/4"Depth of Cut Range 1/8"- 3/8" 1/4"-1/2" 3/8"- 5/8" 1/2"-13/16" 1"- 1-1/4" up to 1" up to 1-1/4"5/8"- 1" up to 1-1/4"

3"

1/2"

5/8"OD

–

$14$1550

1/4"

1/2"

3/4"

All through dovetail bits have 8˚ angles. All carbide bit heights are slightly greater than maximum depth of cut listed.

1"

1-1/4"

Dep

th o

f Cu

t

90 100 150 16050-8Item No. (8mm Shank) 60-8 70-8 75-8 80-8* 140-8*

1/8"

3/8"

5/8"

7/8"

1-1/8" Denotes Depth of Cut Range

ACTUAL SIZE

All bits may be used on the D4R. Bits 90, 100, 150 and 160 cannot be used on the D1600 Jig. * One 1/2" 8˚ dovetail bit (No. 80-8), one 5/16"straight bit (No. 140-8) and one 1/2" 14˚ dovetail bit (No. 120-8) are included with the D4R and D1600 jigs.

T H R O U G H D O V E T A I L B I T S E L E C T I O N

Item 172-8 1⁄2" to 8mm collet reducer, 1-1⁄4" long.

NOTE: Included with sets 5116-8 and 2411-8 ................US$6 ........CDN

$7

Bit Selection for Half-BlindDovetailsWith half-blind joints, the pins and tails are

cut using the same dovetail bit. The bit angle

determines the nominal depth of cut, there-

fore, a bit of a given angle must cut at or

very near a specific depth in order to make

pins and tails fit together properly. For

instance, the included 1/2" 14° dovetail bit

that comes with the D4R and D1600 jigs

must cut at a depth of 7/16". This bit is ideal

for flush drawer fronts that are a minimum

thickness of 9/16" or greater.

Choose a bit with a depth of cut 1/8" less

than the thickness of the pin board. For rab-

beted or lipped drawers, choose a bit with a

cutting depth slightly less than the rabbet’s

shoulder depth. All half-blind dovetail bits

(8mm shank) are used with the supplied

7/16" OD template guidebush.

Bit Sets for the D4R and D1600

*Comes standard with the D4R and D1600 **Recommended for the D1600 ***Recommended for the D4R

Leigh has six boxed bit sets for its dovetail jigs— all six work with the D4R and two work with the D1600. These boxed sets save you

money over buying bits individually. Each set comes standard with a free box with a precut foam insert that accepts all shank sizes and

a handy bit chart in the lid to list out all the bits specs. Combine bit sets 1607-8 and 2411-8 with the RVA1 and save even more. See p.5.

All bit sets for the D4R and D1600 come in the preferred 8mm shank size or the 1/4" shank if required. Please note bits with 1/2"shanks cannot be used on the D1600.

For D4R/D1600 For D4R For D4R

11www.leighjigs.com

Item 1607-8 8mm shank ......US$89 ........CDN

$99Item 1607 1/4" shank ........................US$89 ............CDN$99

Item 2411-8 8mm shank ....US$139 ....CDN

$149Item 2411 1/4" shank ........................US$139 ..........CDN$149

Item 5116-8 8mm shank ....US$169 ....CDN

$186Item 5116 1/4" shank ......................US$159 ..........CDN$175

D 4 R a n d D 1 6 0 0 B I T S E T C O M PA R I S O NItem No. 50-8 60-8 70-8 75-8 80-8* 90 100 101-8 112-8 120-8* 128-8 140-8* 150 160 172-81607-8** D4R/D1600 • • • • • • •2411-8 D4R • • • • • • • • • • • •

5116-8***D4R • • • • • • • • • • • • • • 2

US$ SAVE CDN$ SAVE

$89 $28 $99 $3050

$139 $48 $149 $5850

$169 $66 $186 $75

3/4"1/2"1/4"

Depth of Cut

5/8"3/8"1/8"

All carbide bit heights are slightly greater than maximum depth of cut listed.

18°

14°

12°

10°

8°

128-8

120-8*

112-8

101-8

80-8*

Item No.(8mm Shank)

ACTUAL SIZE

* One 1/2" 8˚ dovetail bit (No. 80-8), one 5/16" straight bit (No. 140-8) and one 1/2" 14˚ dovetail bit (No. 120-8) are included with the D4R and D1600 jigs.

1/2"

1/2"

1/2"

1/2"

1/2"

3/8"

7/16"

1/2"

5/8"

3/4"

8mm

8mm

8mm

8mm

8mm

2-1/8"

2-1/4"

2-5/16"

2-3/8"

2-9/16"

7/16"

7/16"

7/16"

7/16"

7/16"

$14

$14

$14

$14

$14 $1550

$1550

$1550

$1550

$1550

US$

CDN$

BitDiameter

Cutting Depth

Shank Diameter

Overall Length

GuideBush Size

H A L F - B L I N D D O V E T A I L B I T S E L E C T I O N

How to Order: Page 34 12 The most precise templates. The most precise joints.

F2 and F1600 Finger Joint Templates

Features• Precision CNC machined aluminum alloy template • Precisely adjustable joint fit • F2: 9 sizes of finger joints (1/16", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2")• F1600: 6 sizes of finger joints (1/16", 1/8", 3/16", 1/4", 3/8", 1/2") • F2: 4 sizes of unique rounded finger joints• F2: 4 sizes of square half-blind corners (F1600: 3 sizes)• F2: 4 sizes of round/square through corner joints

Standard equipment• Leigh 8-piece (7-piece for the F1600) VGS variable guidebush system• Fully illustrated user guide

Finger JointTemplatesFinger joints, also called box joints, add visually striking design

to corner assemblies. Unlike dovetails, finger joints do not inter-

lock mechanically but their enormous amount of glue surface

can make them almost as strong as dovetails throughout the

life of the adhesive. Leigh’s versatile F2 and F1600 Finger Joint

Templates are the most comprehensive and accurate jigs of

their kind! The F2 produces 9 sizes and the F1600 produces six

sizes of square-cornered fingers from 1/16" to 1/2". Both tem-

plates can also cut larger joints with a simple downloadable

bulletin from our website. The F2 can also cut square half-blind

joints, and beautiful, unique rounded half-blind joints. Leigh’s

patented Variable Guidebush System (VGS), provided

with both box joint templates, guarantees you can

make every joint fit flawlessly.

F1600

F2

US Patent no. 5,711,356 CDN Patent no. 2,146,834 EURO Patent no. 0 698 458

Note:The F2 attaches directly to the D4R and all 24" D-series Jigs.The F1600 attaches directly to the D1600 Dovetail Jig.

Item F2 24" Finger Joint Template ......................US$229 ..........CDN

$249Shipping weight 8 lb.

Item F1600 16" Finger Joint Template ..........US$199 ..........CDN

$219Shipping weight 5 lb.

Leigh also offers metric versions of the F2 and F1600.Visit our website at leighjigs.com for specifications.

Leigh Template Tool Chest in mahogany with square finger joints. 50"H x 37"W x 19"D

VGS AccuracyJoint fit is easily and precisely controlled using Leigh’s patented Variable Guidebush System

(VGS). The set consists of four (3 on the F1600) CNC machined tapered template guide-

bushes and a common holder that mounts in the router base plate like normal template

guides. Here’s how they work. The barrel of each guide is machined at a 5° angle to match

the 5° angle machined on the template fingers. If you adjust the guide up into the router,

the effective diameter of the guide becomes smaller letting the router bit remove

more material and therefore loosening the joint. Conversely, lowering the guidebush cre-

ates a tighter fit. One eighth of a turn changes the fit by a mere one thousandth of an

inch (.001"). A nylon plug in the guide threads ensures smooth and secure adjustment.

No other system provides such simple and incredibly accurate adjustment.

The VGS comes standard with each Finger Joint Template. VGS guidebushes offer unprecedented ability to adjust

joint fit. The full 8-piece VGS is included with each F2 (7-piece for the F1600). Nominal guide sizes are 3/8", 7/16",

1/2" & 5/8". Mounting adaptors, if needed, are listed on pages 20-21. VGS shown extended, for clarity only.

13www.leighjigs.com

How to Order: Page 34 14 Finger joints from tiny 1/16" to large 1-1/2"

Another unique variation gives

rounded fingers on one face and

square fingers on the adjacent face.

Miniature Finger Joint. Rout fingers

one half and even one quarter of

each guide comb’s native size.

Highly unusual half-blind box joints

are easy to make with the F2 Finger

Joint Template.

Finger Joint Variations

Standard square finger joint.

How to Cut Finger Joints

Cut the Fingers Both finger and socket boards are clamped vertically in the jig. A spiral upcut straight bit that matches the size ofthe desired joint does all the cutting for both pieces. Place the control pin in the hole marked with the finger icon, clamp the workpiece verti-cally in the jig and rout the fingers.

For finger-jointed corners, one board starts with a finger, the other with a socket. The template moves left or right to position thetemplate for each cut. A control pin secures the template in the correct position.

Cut the Sockets Remove the control pin, slide the guide comb template sideways to the next position (the distance between fin-ger centers) and insert the pin in the hole marked by the socket icon.The control pin positioning holes are always at the opposite end of the activeportion of the comb template and do not interfere with the router. Rout the second half of your joint, adjust the fit as needed with the VGS andthen produce as many perfectly fitted boxes as you please.

All finger joints are

cut with straight bits

and Leigh Industries

offers two variants; a

two flute spiral

upcut in High Speed

Steel and a Solid

Carbide version. The

spiral upcut design

cuts cleaner, faster,

leaves a smoother

finish and dra-

matically reduces

tearout. Although

both produce excel-

lent results, the solid

carbide versions are

stiffer and they hold

a keen edge longer

than the HSS. Choose

the bit that best

suits your needs and

budget.**

** **

Leigh has four boxed spiral upcut bit sets for the F2 and

F1600 templates, two High Speed Steel (HSS) and two

Solid Carbide (SC). Solid Carbide spiral upcut bits are for

those that have to have the best! Although they are

expensive, they will outlast the rest.

Most 1/2" collet routers come with 1/4" collets or

collet reducers, or they are commonly available. The

5/16" (8mm) and 3/8" shank sizes are not common so

we have included collet reducers 172-8 and 172-375

in the sets below.

Bit Sets for the F2 and F1600

Item 172-8 Item 172-375

For F1600 For F2

Bit Selection for Finger Joints

15www.leighjigs.com

F 2 a n d F 1 6 0 0 B I T S E T C O M PA R I S O NItem No. (High Speed Steel) 162 163 164 165 166 168 170 173 180 172-8 172-375 US$ SAVE CDN$ SAVE

1606F For F1600 • • • • • • • $86 $850 $95 $1450

1618F For F2 • • • • • • • • • • • $109 $2600 $125 $31Item No. (Solid Carbide) 164C 165C 166C 168C 170C 173C 180C 172-8 172-3751606C For F1600 • • • • • • • $185 $2650 $199 $4350

1618C For F2 • • • • • • • • • • • $249 $3650 $279 $54

Item 1606F HSS........US$86 ........CDN

$95Item 1606C SC........US

$185 ....CDN$199

Item 1618F HSS ....US$109 ....CDN

$125Item 1618C SC........US

$249 ....CDN$279

Item 172-8 1/2" to 8mm collet reducer 1-1/4" long ..................US $6 ..........CDN

$7Item 172-375 1/2" to 3⁄8" collet reducer 1-1/4" long ..........US

$6 ........CDN $7

162–

163–

164164C

165165C

1/4"

1/2"

3/4"

1"

1-1/4"

1/8"

3/8"

5/8"

7/8"

1-1/8"

166166C

168168C

170170C

173173C

180180C

Dep

th o

f Cu

t

Item No. (HSS)

Item No. (Solid Carbide)

1/16"Bit Diameter 3/32" 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

3/16"Max Depth of Cut 3/8" 3/8" 5/8" 5/8" 3/4" 7/8" 1" 1-1/4"

1/4"Shank Diameter 1/4" 1/4" 1/4" 1/4" 1/4" 8mm (5/16") 3/8" 1/2"

2"Overall Length 2" 2" 2" 2-1/2" 3" 2-3/4" 3" 3-1/2"

8-7/16"Max Board Width 12-9/16" 8-7/16"* 10-1/2" 12-9/16" 8-7/16"* 10-1/2"** 12-9/16"** 14-21/32"**

HSS

SOLIDCARBIDE

$10 US $ $9 $9 $12 $9 $9 $1350 $12 $20$12 CDN $ $10 $10 $13 $11 $10 $1650 $1550 $23

–US $ – $21 $20 $2350 $28 $39 $39 $65–CDN $ – $26 $25 $2750 $33 $4850 $47 $69

50

F I N G E R J O I N T B I T S E L E C T I O N

All bits may be used with the F2. Bits 165 and 170 cannot be used with the F1600 Template.* 1/4" and 1/8" box joints may be routed up to 14" widths on the 1/2" comb.** A simple two-step procedure allows 5/16" square finger joints to be routed to 20" width, and 3/8" and 1/2" square finger joints to be routed to 24" width.NOTE: 162, 163, and 165 are single fluted bits.

ACTUAL SIZE

How to Order: Page 34 16 Isoloc Joints –only with a Leigh Jig!

Bears EarsClover

Inlaid Bears EarsInlaid Clover

Mirror KeyKey

Inlaid Key Inlaid Mirror Key

WaveEllipse

Inlaid WaveInlaid Ellipse

Isoloc™ Joint TemplatesThe Dovetail joint has been the hallmark of excellence for centuries. No other method

of joinery offered the distinctive look and incredible strength of this mechanically

interlocking joint until Leigh invented the Isoloc joint.

Leigh’s revolutionary Isoloc joints represent the first entirely practical alternative

to traditional dovetail joinery. With a Leigh Dovetail jig and an Isoloc template, even

novice woodworkers can produce strong, functional and distinctively attractive joints.

Six innovative designs make it easy to match a joint style to your project.

Joint fit is precisely controlled using Leigh’s patented Variable Guidebush System

(VGS), a unique adjustable 3-piece tapered template guidebush that can be adjust-

ed up or down, changing the joint fit in increments of .001".

Jewelry Cabinet in black walnut with book matched

veneer front and maple inlays. 46"H x 15"W x 12"D

I16003I13

and

and

and

Isoloc Joint Templates

US Patent no. 5,114,265 CDN Patent no. 2,064,500 EURO Patent no. 0 509 894

Features • Precision CNC machined aluminum alloy template• Scales include inch and metric measurement• Fully adjustable joint tightness with the VGS• I1 Templates attach directly to the D4R and all

24" D-series jigs• I1600 Templates attach directly to the D1600

Standard equipment• Leigh 5-piece VGS Variable Template Guidebush System

(with nominal 1/2"o.d. guide)• Fully illustrated dual measurement user guide

Items I1A, I1B, I1C Isoloc Joint Templates

Each template ..............................US$199 ..............CDN

$219Shipping weight 7 lbs. each

Item I13 Isoloc Templates A, B & C Get all three Isoloc templates, aVGS and a user guide and SAVE $148US or $168CDN over separate purchase.

All three templates ........................US$449 ..............CDN

$489Shipping weight 20 lbs.

Items I1600A, I1600B, I1600C Isoloc Templates

Each template ..............................US$159 ..............CDN

$175Shipping weight 6 lbs. each

Item I16003 Isoloc Templates A, B & C Get all three Isoloctemplates, a VGS and a user guide and SAVE $138US or $156CDN over separatepurchase.

All three templates ........................US$339 ..............CDN

$369Shipping weight 13 lbs.

All Isoloc joints are cut with a 5/16" straight bit. Solid carbide spiral upcut bits produce the best

results. Solid carbide’s great rigidity and excellent edge retention, together with the spiral bits

superbly clean cutting, gives you the best performance possible with your Isoloc template.

A plunge router is recommended as it’s preferable to rout the horizontal socket boards

in multiple passes. The depth stops on plunge routers

make this process safe, efficient and precise.

To cut inlaid Isoloc joints you need additional

1/4" and 3/8" bits. Check the shank sizes and order

the appropriate collet reducers.

Bit Selection for Isoloc Joints

How to Cut Isoloc Joints

Cut the Pins Isoloc templates require very little setup. Set the scales on the left and right of the template to the thickness of the pinboard (drawer front). Next, use the stainless steel pin to position the template in the Pin mode indicated by the icon. Set the cutting depth to matchthe thickness of the drawer side (tail board) and rout the pins.

Cut the Tails Remove the stainless steel pin, move the template to the Tail mode and reinsert the pin. Then, mount the tail boardhorizontally in the jig. There is no need to adjust the scales or cutting depth. Rout the tails and make adjustments for fit as required. Remember,adjustments for fit can be made in increments of .001". That’s it. You have just created one of the most visually distinctive joints possible.

F

B

Min 3 /4"Max 1 1 /2"

C

DE

A

B

Item 172-8 Item 172-375

Bit Sets for Isoloc Joint Templates

Item 1617I Item 1617IC

17www.leighjigs.com

Item 172-8 1/2" to 8mm collet reducer 1-1/4" long ..................US $6 ..........CDN

$7Item 172-375 1/2" to 3⁄8" collet reducer 1-1/4" long ..........US

$6 ........CDN $7

LEIGH BIT ITEM NO. A B C D E FBit Cutting Shank Shank Overall Joint

HSS Solid Carbide Diameter Depth Diameter Length Length Length

168 168C 1/4" up to 1" 1/4" 1 7/8" 3" 5/8"170 170C 5/16" up to 1" 5/16" 1 7/8" 3" 5/8"173 173C 3/8" up to 1" 3/8" 1 7/8" 3" 5/8"

US CAN US CAN$9 $10 $28 $33

$1350 $1650 $39 $4850

$12 $1550 $39 $47

PRICESolid Carbide Spiral UpcutHSS Spiral Upcut

I S O L O C J O I N T B I T S E L E C T I O N

Item 1617IC* Set of three solid carbide spiral upcut bits Save $12 US or $29.50 CDN ....................................................................................US

$94 ..........CDN $99

Item 1617I* Set of three HSS spiral upcut bitsSave $5.50 US or $8.50 CDN ..................................................................................US

$29 ..........CDN $3350

Note: Leigh does not sell 1/4" collet reducers as they’re standard with most 1/2"collet routers, but for 5/16"or 8mmshanks use our 172-8 1/2" to 8mm collet reducer and for 3/8"shanks use our 172-375 1/2"to 3/8"collet reducer.*Included in F2 Bit Sets on p.15

How to Order: Page 34 18 Strong, attractive and only from Leigh!

Multiple Mortise andTenon AttachmentThe layout and cutting of multiple mortise and tenon joints

demands such a high level of time-consuming care and

craftsmanship that these striking joints are usually found only

in the most sophisticated hand-made furniture. Leigh’s M2,

Multiple Mortise and Tenon Attachment however, brings

this challenging joint within easy reach of any woodworker

who owns a 24" D-series Dovetail Jig and a plunge router with

a 1/2" collet. The M2’s adjustable guide fingers let you cut

multiple mortise and tenon joints in virtually any layout you

like, in stock up to 24" wide. Mortises and tenons can be cut

in sizes from delicate 5/16" x 5/8" to muscular 1-1/2" x 2-1/2".

Wall-mounted Bookshelf with Drawer in birdseye maple and maple with cocobolo

wedges. Featuring square wedged mortise and tenons. 16"H x 32"W x 9"D

Joint VariationsM2 Attachment Patented in the U.S.A., Canada and Europe

Features• Mortises and tenons in sizes from 5/16" x 5/8" to 1-1/2" x 2-1/2"• Choice of two corner radii: 5/32", 1/4", plus square (with chiseling)• Fully illustrated user guide• Supplied with 1/2" HSS spiral upcut bit (Leigh No.180)

Item M2-24 24" Multiple Mortise and Tenon Attachment

........................................................................US$199 ............... CDN

$219Shipping weight 10 lb.

This attachment requires a Leigh 24" D-series jig and a 1⁄2" collet plunge router.

For metric versions visit our website at leighjigs.com

Jumbo JointsHalf-Blind and Box JointsHalf-blind dovetails are made with straight guide fingers, as with the D4R

and straight fingers are what you get on the M2 attachment —so yes, it's a

half-blind dovetail jig too. Using either of the two largest dovetail bits for

D-Series Jigs and a special template guidebush for each bit, you can cut jumbo

half-blind dovetails. The 11/16" No.90 dovetail bit works with template

guidebush No.717TP to cut half-blind dovetails 1" deep and the 13/16"

No.100 bit works with guide No.720TP to cut them 1-1/4" deep. These tem-

plate guides must be paired with their respective bits to cut dovetails on the

M2. The M2 User Guide includes instructions for both jumbo finger joints and

jumbo half-blind dovetails. Maximum board thickness is 1-1/2".

Cut the Mortises Mount the M2 template onyour D4R jig in the mortise mode. Adjust the fingers to themultiple mortise and tenon layout you like. The tem-plate guidebush steers your router against the fingersthrough three sides of the mortise. An adjustable fence,the mortise beam, guides your router base as you cutthe fourth side. Set your depth of cut for either blind orthrough mortising.

Cut the Tenons Remove the mortise beam and flipthe finger assembly over to the tenon mode. While thefinger layout establishes the width of your tenons, thescales determine their thickness. Rout one side of thetenons, flip the tenon piece and finger assembly left toright and round off the other side of the tenon.

How to Cut Multiple Mortise and Tenons

A

JJ

J

T

BT

AB

T

J

Min.

1 1/4"

CENTRES

BOARD WIDTH UP TO 24"

BOARD THICKNESS:5/16" to 1 1/2"

TENON WIDTH: 5/8" to 2 1/2"

TENON LENGTH: Blind or Through as required. Maximum 1 1/2"

TENON THICKNESS: 5/16" to 1 1/2"

SQUARE TENON: 5/16" to 1 3/8"

FINGER JOINTS: 5/8" and up, variable

For relatively small mortise & tenon joints in boards 3/4" or thinner stock, a

5/16" spiral upcut bit (Leigh No.170 or 170C) leaves a nice, tight radius in the

corners. Use it with a 1/2" to 8mm (5/16") collet reducer, No.172-8 (see page

10). For heavier joinery in boards 3/4" to 1-1/2" thick, a 1/2" bit (Leigh No.180

or 180C) cuts quickly and smoothly. Leigh sells both HSS and solid carbide

spiral bits. Note: No.180 1/2" HSS spiral bit comes standard with the M2.

Bit Selection for MultipleMortise and Tenon Joints

C

DE

A

B

Jumbo Half-Blind Joint 11/ 4" joints on coffee table or

bench in figured bubinga. 11/ 2" thickness. 17"H x 40"W x 19"D

ACTUAL SIZE

19www.leighjigs.com

Item 717TP .673" (17.1mm) Template Guidebush

(for No.90 bit)..........................................US$15..........CDN

$1625

Item 720TP .756" (19.2mm) Template Guidebush

(for No.100 bit) ........................................US$15..........CDN

$1625

LEIGH BIT ITEM NO. A B C D E RequiredOverall Cutting Shank Shank Overall Template

HSS Solid Carbide Diameter Depth Diameter Length Length Guidebush

180 180C 1/2" 1-1/2" 1/2" 2" 3-1/2" 5/8"170 170C 5/16" 1" 5/16" 2" 3" 7/16"

HSS Spiral UpcutUS CAN US CAN

$2050 $23 $65 $69$1350 $1650 $39 $4850

M U LT I P L E M O R T I S E A N D T E N O N B I T S E L E C T I O N

Solid CarbidePRICE

How to Order: Page 34 20 See www.leighjigs.com for the most up-to-date info

Select the bits required from pages 10,11 or 19. On the same line as the bitspecification is the size of the template guidebush required, either 7⁄16"or 5⁄8".

Go to the selection chart on the facing page and find the make and modelof your router from columns 1 and 2.

Choose the adaptor for your router (if required) from column 3.

Select the 7⁄16" and/or the 5⁄8" template guidebush from columns 4 and 5.Remember the 711TP comes standard with the D4R & D1600.

Place your order from the section below.

Go to the selection chart on the facing page and find the make andmodel of your router from columns 1 and 2.

See if the variable guide system works with your router in column 7.

Select the adaptor plate for your router (if required) from column 3.

Place your order from the section below.

1

2

3

4

5

4

3

2

1

The GBS Universal Template Guidebush Systemincludes template guidebushes and mounting adaptors for all

D-series dovetail jigs and the M2 Multiple Mortise & Tenon

Attachment. Use the instructions below and chart on the facing page

to select the right component(s) for your router.

For jig models D4R, D1600, D4, D3, D1258R, D1258 and theLeigh M2 Attachment

For all Finger joint and Isoloc joint templates

The VGS Variable Template Guidebush Systemis included with the F2 and F1600 Finger Joint Templates and

the I1 and I1600 Isoloc Joint Templates, but you may need an

adaptor for your router (see below). Note: The VGS guides do

not work on the D4R, D1600 or the M2.

GBS VGS

Using Routers with Leigh JigsRouters are one of the most versatile tools in your shop and Leigh jigs are compatible with

almost every router on the market.

Fixed base routers between 1-1/2 and 2-1/4 hp with 1/2" collets are recommended for most

operations on Leigh dovetail jigs. Fixed base routers tend to be smaller and lighter and are

easier to maneuver over the finger assembly. All dovetail and finger joint routing can be done

with a fixed base router. Plunge routers are recommended for some Isoloc operations and

are a must for routing mortises using the M2 Multiple Mortise and Tenon Attachment.

Select the Correct Template Guidebush and Adaptor for your RouterA template guidebush is required for all routing operations. An industry standard 7/16" OD guidebush (Leigh 711TP) is supplied with

all Leigh jigs and if required, Leigh has a comprehensive assortment of guidebush adaptors to fit most common routers.

Refer to the list below and chart on the facing page to select the correct guidebush and adaptor (if required) for your router. Note:

The D4R and D1600 Jigs include the 711TP template guidebush. Follow the instructions below to find out if the 711TP fits your router

or if you need a different template guide.

711

711TP

716TP

702

702R

RA1113

RA1100

RA1107

703

704705

706

709

719

716

The Leigh Universal Template Guidebush System (GBS) lets you mount precision Leigh template guidebushes to almost any router. Leigh template guidebushes are accurateto .002" and their deep steel or brass barrels ensure secure template routing.Item 702 GBS Adaptor ............................................................................US $1350 ....CDN $15Item 702R GBS Adaptor ..........................................................................US $18 ....CDN $20Item 703 GBS Adaptor ............................................................................US $1350 ....CDN $15Item 704 GBS Adaptor ............................................................................US $1350 ....CDN $15Item 705 GBS Adaptor ............................................................................US $1350 ....CDN $15Item 706 GBS Adaptor ............................................................................US $1350 ....CDN $15Item 711 7⁄16" OD Template Guidebush ..............................................US $10 ....CDN $1125

Item 716 5⁄8" OD Template Guidebush ................................................US $10 ....CDN $1125

Item 711TP* 7⁄16" OD Universal Template Guidebush with Nut ......US $10 ....CDN $1125

Item 716TP 5 ⁄8" OD Universal Template Guidebush with Nut ..........US $10 ....CDN $1125

Item 709 3⁄8" Template Guidebush or Item 719 3⁄4" Template Guidebush for general template routing, not for use on Leigh Jigs ......US $10 ....CDN $1125

Bosch RA1100 Adaptor ........................................................................US $8 ....CDN $10Bosch RA1107** 7⁄16" Template Guidebush......................................US $10 ....CDN $1250

Bosch RA1113** 5⁄8" Template Guidebush ......................................US $10 ....CDN $1250

*Included with all Leigh dovetail jigs.**These two Bosch bushes were not specifically designed for use on Leigh jigs and may require filing to length.

Template Guidebush System Selection Chart

1 2 3 4 5 6 7ROUTER ROUTER LEIGH OR 7/16" OUTSIDE 5/8" OUTSIDE METHOD OF WORKS WITHMAKER MODEL ROUTER MAKER’S DIAMETER DIAMETER ATTACHMENT LEIGH VGS

ADAPTOR NO. GUIDEBUSH NO. GUIDEBUSH NO.▼

u G

uide

bush

mou

ntin

g sc

rew

s ar

e pr

ovid

ed w

ith a

dapt

or a

nd a

dapt

or m

ount

ing

scre

ws

are

prov

ided

with

rout

er.

t5/

8" O

.D.g

uide

bush

es a

re u

sed

only

with

1/2

" sh

ank

rout

er b

its.

nM

AFEL

L –

Rew

ork

the

adap

tor s

light

ly.No

te: I

deal

bar

rel d

epth

is 1

/4"

to 9

/32"

(6m

m to

8m

m) b

elow

the

rout

er b

ase.

Othe

r man

ufac

ture

rs’ g

uide

bush

es m

ay re

quire

car

eful

cut

ting

to le

ngth

.All

Leig

h bu

shes

hav

e 5/

16"

long

bar

rels

.

AXMINSTER WHITEAW635R No adaptor required 711 716 Screws incl. w/router YESAW127R Adaptor supplied w/router 711 716 Screws incl. w/router YES

BLACK & DECKERAll Professional, HD 1250, RP400K No adaptor required 711TP 716TP Threaded nut included YES

6200 720673-00 711TP 716TP 2 screws req’d. 249412-20 YESSR100, 7AEE, KW780 series No adaptor required 711 716 Screws incl. w/router YES

90140, 90098, 90088 82855 82854 Screws included NO90085, 90150, 90300, 90303, 90305, 91264

No adaptor required82859 82864 Screws included NO

1600, 1601, 1602, 1603, 1604, 1606, B1350 2 610 906 290 711TP 716TP Threaded nut included YES

BOSCH 1613,1613EVS,1613AEVS,1614,1614EVS, No adaptor required if1617,1617EVS,1618EVS,1619EVS,B1450 using RA Template Guides RA1107 RA1113 No screws required YES

POF800ACE,POF1100AE,GOF900ACE, RA1100 required for 711TP 716TP Threaded nut included YESGOF1200,GOF1300ACE,GOF2000CE 711TP, 716TP and VGS

1611, 1611EVS,1615,1615EVS, B1550702 711 or 711TP 716 or 716TP u YES

GOF1600, GOF1700ACECMT 1E 702R 711 or 711TP 716 or 716TP u YES

Set of 3 bushes from Sears USA order no.25082All non-plunge models No adaptor required (stamped steel) or 25090 (plastic). Set of 3 Screws incl. w/set NO

CRAFTSMAN (SEARS) bushes from Sears Canada order no.092-970-704

135275070 Plunge See Skil 1823 or 1835Other plunge models 702 711 or 711TP 716 or 716TP u YES

DW610, DW616, DW618 No adaptor required 711TP 716TP Threaded nut included YESDW613 No adaptor required 711 716 Screws incl. w/router YES

DW614, DW615, DW621 North America OnlyDEWALT DW624, DW625 and DW626 Adaptor supplied w/router

711TP 716TP Threaded nut included YES

DW621K and DW626 outside N. America 706 711 716 u YESDW625 Type 1, 2, 3, 5 outside N. America 702 711 or 711TP 716 or 716TP u YESDW625 Type4 outside N.America, DW625EK 702R 711 or 711TP 716 or 716TP u YES

OF15, OF15E, OF97, OF97E 706 711 716 u YESMOF68, MOF69, MOF96, MOF96E No adaptor required 711 716 Screws incl. w/router YESMOF131, MOF177 Type 1, 2 & 3 702 711 or 711TP 716 or 716TP u YES

ELU MOF177 Type 4, MOF177EK 702R 711 or 711TP 716 or 716TP u YES2720, 2721, 3328 No adaptor required 711TP 716TP Threaded nut included YES

3303, 3304 E09600 or 761 270-00 711TP 716TP Threaded nut included YES3337, 3338, 3339 702 711 or 711TP 716 or 716TP u YES

FEIN RT1800 Adaptor supplied w/router 711TP 716TP u YES

OF1E,OF2E,OF650,OF900E,OF1000,OF1010E 704 711TP 716TP Threaded nut included YES

FESTOOLOF2000, OF2000E 705 711 716 u YES

OF1400 North America Only Adaptor supplied w/router 711TP 716TP Threaded nut included YES

OF1400 Outside North America 493566 711TP 716TP Threaded nut included YESFLEX All No adaptor required 711TP 716TP Threaded nut included YES

FREUDFT2000 703 711 or 711TP 716 or 716TP u YES

FT1700 FT1100 711TP 716TP Threaded nut included YES

TR8, TR12, FM8, M8, M12 Series 325211 or 703 711TP 716TP Threaded nut included YESHITACHI

M12VC, KM12SC, KM12VC No adaptor required 711TP 716TP Threaded nut included YESMAFELL LO65E 702 n 711 or 711TP 716 or 716TP u YES

3600,3606,3608,3612, 3612B,3612BR703 711 or 711TP 716 or 716TP u YES3612C N. America, 3620, 3621

MAKITA3612C Europe Qk.Fit Base Contact your National Leigh distributor

3601B 321 493-1 711TP 716TP Threaded nut included YESRP0910, RP1110C 706 711 716 u YES

RF1100, RF1101, RD1100, RD1101, RP1101 No adaptor required 711TP 716TP Threaded nut included YES

METABO OF1612, OFE1812 704 711TP 716TP Threaded nut included YES

5615, 5616, 5619 49-54-1040 711TP 716TP Threaded nut included YESMILWAUKEE

5625 49-54-1026 711TP 716TP Threaded nut included YESPERLES OF808 Series, OFE 6990 No adaptor required 711 716 Screws incl. w/router YES

PORTER CABLE (ROCKWELL) All No adaptor required or711TP 716TP Threaded nut included YESadaptor supplied w/router

POWER DEVIL All No adaptor required 711 716 Screws incl. w/router YES

R30, R50, R150, R151, RE155,703 711 or 711TP 716 or 716TP u YESR500, R501, R502

RYOBI R600, R601, RE600, RE601 702 711 or 711TP 716 or 716TP u YES

R160, R161, R162, R165, R170,706 711 716 u YESR175, RE175, R180, R180PL, R181, R185

SKIL

1823 or 1835 91803 711TP 716TP Threaded nut included YESAll others No adaptor required 11592 71021 Nut 11587 NO

SK1810, 1815, 1820, 1825 RAS140 711TP 716TP Threaded nut included YES

T5 No adaptor required711 716 Screws incl. w/router YESTREND (FELLISATI)

T9 Adaptor supplied w/router

TRC001 TGA006 or 704 711TP 716TP Threaded nut included YESTRITON

MOF001 TRA359 711TP 716TP Threaded nut included YES

WEGOMA OF850 Series No adaptor required 711 716 Screws incl. w/router YES

IMPORTANT: Check the make and model of your router in column 1.Where possible, always order the Leigh adaptors and template guidebushes (indicated in red), whichare specially designed for use on Leigh jigs. Leigh also sells other manufacturer’s adaptors and template guidebushes (indicated in green). All others must be purchasedfrom the router manufacturer’s own distributor.NOTE: If your router is not listed here, visit leighjigs.com for a complete, up-to-date list of routers.

21www.leighjigs.com