LENCO WELDING ACCESSORIES LTD. SECTION 300 ...Quick Reference PAGE(S) 2-7 11-12 8-10 19 13-17 18 20 ELECTRODE HOLDERS ROTARY GROUND CLAMPS GROUND CLAMPS CABLE LUGS STUD AND TERMINAL

Quick ReferencePAGE(S)

2 - 7

11 - 12

8 - 10

19

13 - 17

18

20

ELECTRODEHOLDERS

ROTARY GROUNDCLAMPS

GROUNDCLAMPS

CABLE LUGS

STUD AND TERMINALCONNECTORS

CABLECONNECTORS

CABLESPLICERS

Dinse TYPE

CONNECTORSAND ADAPTERS

LENCO WELDING ACCESSORIES LTD. SECTION 300

© February 2008 LENCO ARC ACCESSORIES PAGE 1

1

4

3

2

QUALITY ELECTRODE HOLDERS

Material Construction

LENCO “AF”/“HT” Series Electrode Holders Offer All These Features

1. LENCO's durable tip insulators are molded from a high impact/hightemperature fiberglass compound.

2. The upper lever is fully insulated. The low profile "AF" Seriesdesign fits your hand comfortably while the "HT" Series allowsgreater hand clearance.

LENCO electrode holders (upper and lower tongs) are made from a high copper alloy for maximum conductivity and strength. The top andbottom tip insulators are a molded fiberglass compound and will withstand intensive heat and impact. Parts for all models are replaceable. Theoval-point screw cable connection is standard on all models.

AF/HT-1, 2, 25, 3, 35 and 50 holderhandles are molded from a durableglass filled nylon material with goodheat and impact resistance.

Choosing The Right Size...ELECTRODE HOLDERThe choice of an electrode holder that will be lightweight, run cool, and at the least cost can be determined first by the maximum rod used and

second, by the maximum amperage setting used. LENCO holder numbers indicate the amperage capacity. For example, an AF-2 holder has amaximum amperage capacity of 250 amps. Match the holder to the rod and amperage used for greatest efficiency.

LENCO electrode holders are designed to fit comfortably in the welder's hand. Each design allows the LENCO electrode holder to fit a welder'shand like a glove and provide superior electrode control.

3. LENCO's powerful spring holds the electrode securely in placeand prevents electrode slippage. The spring is protected by aLexan cup insulator.

4. LENCO's specially designed oval-point screw makes it easy toinstall our holder on a cable. Just strip off the appropriate lengthof cable insulation and insert it into the holder body, then tightendown the large oval-point screw with an allen wrench. Thismakes an excellent connection. As a safety precaution, thehandle retention screw is upset to prevent removal.

LENCO WELDING ACCESSORIES LTD.

© February 2008LENCO ARC ACCESSORIES PAGE 2

SECTION 300

AF-1 01010 150-200 1 (35mm²) 5/32” (3.97mm) 8¼” (210mm) 11 oz. (310g)

AF-2 01020 200-250 1/0 (50mm²) 5/32” (3.97mm) 8¼” (210mm) 12½ oz. (360g)

AF-25 01030 250-300 2/0 (70mm²) 3/16” (4.75mm) 8½” (216mm) 16 oz. (450g)

AF-3 01040 300-350 2/0 (70mm²) 1/4” (6.35mm) 10” (254mm) 21 oz. (600g)

AF-35 01050 350-400 3/0 (70mm²) 1/4” (6.35mm) 10” (254mm) 24 oz. (680g)

AF-50 01060 450-500 4/0 (95mm²) 3/8” (9.53mm) 10½” (267mm) 31 oz. (880g)

HT-2 01320 200-250 1/0 (50mm²) 5/32” (3.97mm) 9” (229mm) 13 oz. (360g)

HT-25 01330 250-300 2/0 (70mm²) 3/16” (4.75mm) 9¾” (248mm) 19 oz. (540g)

HT-3 01340 300-350 2/0 (70mm²) 1/4” (6.35mm) 10½” (267mm) 23 oz. (650g)

HT-35 01350 350-400 3/0 (70mm²) 1/4” (6.35mm) 10½” (267mm) 24 oz. (680g)

HT-50 01360 450-500 4/0 (95mm²) 3/8” (9.53mm) 10½” (267mm) 31 oz. (880g)

Item Amp Cable ElectrodesModel Code No. Capacity Capacity Up To Length Weight

Light Duty

Medium Duty

Heavy Duty

Light Duty

Medium Duty

Heavy Duty

Optional - Holders may be custom imprinted.

Holder Replacement Parts

“AF”/“HT” - Series

ELECTRODE HOLDER1. Tip Insulator w/Screws

2. Upper Body Tong, Insulated

3. Spring Cup Insulator

4. Spring Set (with items 3 & 5)

5. Spring Flat Insulator

6. Molded Handle

7. Hinge Pin

8. Lower Body Tong

9. Oval-Point Screw

Replacement parts for allLENCO electrode holders areavailable and easily installed.Select the parts you need fromthe illustration. Part names areshown below and the partnumber is under the holdernumber in the same column.

1 Tip Insulator, w/Screw 01325 01325 01325 01325 01325 01335 01335 01335 01335 01335 01335

2 01021 01021 01321 01031 01331 01051 01341 01051 01341 01051 01341

3 01027 01027 01071 01071 01337 01071 01337 01071 01337 01071 01337

4 01026 01026 01324 01034 01334 01054 01334 01054 01334 01069 01364

(Lexan Cup & Flat Insulator)

5 Spring Flat Insulator 01070 01070 01070 01070 01070 01070 01070 01070

6 01011 01023 01323 01033 01333 01042 01343 01053 01353 01066 01363

7 Hinge Pin 01214 01214 01214 01214 01214 01223 01223 01223 01223 01223 01223

8 Lower Body Tong 01222 01022 01022 01032 01032 01041 01041 01052 01052 01062 01062

9 Oval-Point Screw 01025 01025 01025 01025 01025 01225 01225 01068 01068 01068 01068

Tip Insulator Screws, doz. 01065 01065 01065 01065 01065 01065 01065 01065 01065 01065 01065

Electrode Holder Model and Item Code No.

Item No. Description AF-1 AF-2 HT-2 AF-25 HT-25 AF-3 HT-3 AF-35 HT-35 AF-50 HT-50

Upper Body Tong

Spring Cup Insulator

Spring Set, w/Insulators

Molded Handle




“AF” Series

12

1

8

7

9

3

4

5

6

“HT” Series

Light, Medium, and Heavy Duty Models

250- 016250 250 1/0 (50mm²) 7/32” (5.5mm) 9-1/2” (241mm) 13 oz. (360g)

300- 016300 300 2/0 (70mm²) 1/4” (6.3mm) 11-5/8” (295mm) 20 oz. (570g)

400- 016400 400 3/0 (70mm²) 5/16” (7.9mm) 12-1/4” (311mm) 24 oz. (677g)

600- 016600 600 4/0 (95mm²) 1/2” (12.7mm) 13-1/4” (337mm) 36 oz. (1kg)


Light Duty

Medium Duty

Heavy Duty

I

I

I

I

INSULATED DURO HOLDER #250-250 amperes capacity - 1/16” to 7/32” electrodes. Weight 13 ounces (360g)

I


I


I

INSULATED DURO HOLDER #600-600 amperes capacity - 1/4” to 1/2” electrodes. Weight 36 ounces (1kg)

I

DEPENDABLEELECTRODEHOLDERS

Duro has produced dependable and efficient holders since 1932.They are lightweight and perfectly balanced to make working lessawkward no matter where the weld must be made. The jaws aremade with a unique internal tension design which is extremelydurable. The positive energy saving grip of the jaws holds large orsmall electrodes equally well. All parts are easily replaced using ascrewdriver and wrench. Check these features:

•Unique internal tension design lasts longer•Positive grip jaws hold small or large electrodes•Easily replace parts quickly using only screwdriver and wrench•No coil spring to lose its tension

•Safe, square guard protects hands from heat; prevents rolling andgrounding when set down

•Screw-in type jaws replaced with only a wrench•Rugged fibre handle lasts longer•Cool operating and cool handling

“This is theOriginal Duro

Product.”

FULLY INSULATED DURO HOLDERS



SECTION 300

Duro Holder Replacement Parts

DESCRIPTION ITEM NO. #250- #300- #400- #600-I I I I

Complete Holder 016250 016300 016400 016600

Bottom Jaw Insulator 1 016251 016301 016401 016401

Top Jaw Insulator - Large 2 016252 016302 016402 016402

Top Jaw Insulator - Small 3 016253 016303 016403 016403

Jaws - Plain (upper & lower) 4 016254 016304 016404 016404

Jaws with Insulators 016255 016305 016405 016405

Trigger - Plain 6 016256 016256 016256 016256

Trigger Insulator Cover 6A 016256A 016256A 016256A 016256A

Trigger Insulator Screw - 6 pcs 6B 016256B-6 016256B-6 016256B-6 016256B-6

Brass Core w/Hardware Kit 7 016257 016307 016407 016607

Trigger with Insulator 016258 016258 016258 016258

Handle 9 016259 016309 016409 016609

Guard 10 0162510 016310 016410 016410

Rubber Insulator for Handle Screw 11 N/A 016311 016311 016311

Handle Screw 12 0162512 016312 016312 016312

Screw for Jaw Insulation - 6 pcs 016256B-6 016256B-6 016413-6 016413-6

Screw for Jaw Insulation - 100 pcs 016256B-100 016256B-100 016413-100 016413-100

Allen Wrench 14 0162514 0162514 0162514 016614

Set Screw for Core 15 0162515 0162515 0162515 016615

Requires 2 for 400 & 600 Uses 2 Uses 2

Brass Foil 16 0162516 0162516 0162516 0162516

Curved Brass Piece 17 0162517 0162517 0162517 0162517




1

2

3

6B

4

6A

10

6

16

15

7

912

17

14

11

“Twister” Electrode Holder

The LT-250/400 design minimizes exposedscrews, internal metal parts or any current carryingmembers in the holder for added user safety.

- Holders may be custom imprinted.Optional

LT-250/400 Holder Replacement Parts

Lenco Shortstub Electrode Holder

LT-250 LT-400Item No. Description Item Code No. Item Code No.

1. Head Insulator 01422 01472

2. Head Insulator Screw 01485 01485

3. Head Member 01427 01477

4. Spring Cup 01425 01284

5. Spring Coil 01426 01286

6. Handle 01424 01474

7. Pressure Pin 01423 01481

8. Brass Body w/Screws 01432 01482

9. Pressure Pin Screw 01485 01485

10. Oval-Point Screw (2) 01025 (1) 01025 (2)

RHA-250 01430 250 — 3/16” (4.75mm) 3-1/2” (89mm) 5.4 oz. (153g)

RHA-400 01400 400 — 1/4” (6.35mm) 4-1/8” (105mm) 9 oz. (255g)


Medium Duty

Heavy Duty

LT-250 01420 250 2/0 (70mm ) 3/16” (4.75mm) 8” (203mm) 11 oz. (310g)

LT-400 01410 400 3/0 (70mm ) 1/4” (6.35mm) 8-15/16” (227mm) 22 oz. (624g)

2

2

Heavy Duty L-400 - 400 3/0 (70mm 1/4” (6.4mm) 8-3/8” (213mm) 20oz. (575g)

L-400S - 400 3/0 17 490

L-600 01290 600 4/0 (95mm ) 5/16” (7.9mm) 8-5/8” (219mm) 29 oz. (829g)

LK-600 01295 600 — 5/16” (7.9mm) 3-15/16” (100mm) 13 oz. (361g)


Extra

Heavy Duty

2

2

2

)

(70mm ) 1/4” (6.4mm) 8-3/8” (213mm) oz. ( g)

LK-400 - 400 - 1/4” (6.4mm) 3-1/2” (89mm) 9oz. (240g)

EB-250S 01700 250 2/0 (70mm ) 3/16” (4.75mm) 8” (203mm) 12 oz. (350g)

EB-250L 01710 250 3/16” (4.75mm) 19-1/4” (490mm) 24 oz. (680g)


2

22/0 (70mm )

EB-250S / EB-250L Electrode Holder

Designed for the

Shipyard& Related

Industries




SECTION 300

8

9

7

54

6

3

1

2

10

Assemblies

WELDING CABLEUsing the right size welding cable on a welder is vitally important in obtaining sound welds. The following table gives the recommendedsizes of cable to be used as approved by the American Welding Society.

WELDER CAP. Recommended Sizes of Welding Leads (Electrode Holder Ground)*

in Amps 50' (15m) 75' (22m) 100' (30m) 125' (37m) 150' (45m) 175' (53m) 200' (60m)

and

100 2 (35mm²) 2 (35mm²) 2 (35mm²) 2 (35mm²) 1 (35mm²) 1/0 (50mm²) 1/0 (50mm²)

150 2 (35mm²) 2 (35mm²) 1 (35mm²) 1/0 (50mm²) 2/0 (70mm²) 2/0 (70mm²) 3/0 (70mm²)

200 2 (35mm²) 1 (35mm²) 1/0 (50mm²) 2/0 (70mm²) 3/0 (70mm²) 4/0 (95mm²) 4/0 (95mm²)

250 2 (35mm²) 1/0 (50mm²) 2/0 (70mm²) 3/0 (70mm²) 4/0 (95mm²)

300 1 (35mm²) 2/0 (70mm²) 3/0 (70mm²) 4/0 (95mm²)

350 1/0 (50mm²) 3/0 (70mm²) 4/0 (95mm²)

400 1/0 (50mm²) 3/0 (70mm²) 4/0 (95mm²)

450 2/0 (70mm²) 3/0 (70mm²)

500 3/0 (70mm²) 4/0 (95mm²)

*Based on direct current and 4-V drop. Use the next larger size for A-C welding.

...

Attach holder andcable connectorto whip cable.

Use complete cableconnector here. Extralengths may be added.

Plug male halfconnector intoterminal.

Bolt LENCOconnector terminalto machine stud.

Power source cable leadWhip cable

Shown above is a typical welding machine cable hook-up using LENCO connector terminal at the machine with male half of a LENCO connector.A complete cable connector is in the circuit and a whip lead on the holder. With this arrangement, extra lengths of cable can be added or taken outas the need arises. When not in use, extra lengths of cable can be stored to save wear. Always work as close to the power source as possible forgreatest efficiency and best welding results. See page 14 for Whip Cable Connectors.

ADDITIONAL ASSEMBLIES AVAILABLE UPON REQUEST.

IS-25 01525 AF Style Isolator w/cable

ISH-25 01555 HT Style Isolator w/cable

ItemModel Code No. Description

FEATURES

• Electrode holder with locking mechanism

• Protects welder from OCV

• Safely reinsert electrode and position intotight, difficult areas

• Available in AF or HT style holders, designedfor 250 amps using 3/16” electrodemaximum

• Made of high quality materials-high copperalloy casings with glass-filled thermoplasticand thermoset components.

• Comes complete with 12’ of No. 2 cable andLC-1040 male connector.

ISOLATOR HOLDERS



SHOCKEDOCV?

BY

A good ground connection is just as important in a welding circuit as the holder and the cables. A good ground clamp reduces energy costs, extends cable life,helps produce consistent welds and allows ground location to be easily changed.

Item Amp Cable JawModel Code No. Capacity Capacity Type of Cable Connection Weight Opening

200 02010 200 No.4 thru No.1/0(25-50mm ) Mechanical Oval-Point Screw 13 oz. (370g) 1” (25.4mm)300 02020 300 No.1/0 thru No.2/0(50-70mm ) Mechanical Oval-Point Screw 26 oz. (740g) 1½” (38.1mm)500 02030 500 No.3/0 thru No.4/0(70-95mm ) Mechanical Oval-Point Screw 35 oz. (995g) 1½” (38.1mm)

2

2

2

•

•

LENCO ground clamps have the largest contact area with the work ofany clamp on the market. Serrated upper and lower jaws insure maximumbite to the work. A good ground clamp helps assure proper voltage formaximum weld results with all rods.

Both upper and lower jaws of all three models are made from a highcopper alloy assuring excellent current carrying ability. No steel jaws areused. A good ground connection assures better welds.

Item Amp Cable JawModel Code No. Capacity Capacity Type of Cable Connection Weight Opening

LPG-200 02011 200 No. 4 thru No. 1/0(25-50mm ) Mechanical Oval-Point Screw 13 oz. (370g) 1” (25.4mm)LPG-300 02021 300 No.1/0 thru No.2/0(50-70mm ) Mechanical Oval-Point Screw 25 oz. (709g) 1½” (38.1mm)LPG-500 02031 500 No.3/0 thru No.4/0(70-95mm ) Mechanical Oval-Point Screw 38 oz. (11kg) 2” (51mm)

2

2

2

•

•

A tough, brass hinge pin is durable and allows both jaws to carrycurrent. The enclosed heavy duty spring assures a powerful bite on the work.The insulation on top and bottom provides extended spring life.

All three sizes of the original LENCO ground clamps have the oval-pointscrew cable connection which is easy to install. No shim stock or pressureplate is needed.

LPG-500

Quality • High Copper Alloy • Insulated Spring

500

The is a molded non-conductive ground clamp with copper jaws.The ground clamp is ideal for light duty welding. May be used for other light duty applications.The ground clamp is ideal for the farm welder or for light shop work.The is excellent for field erection or where clamping to bar stock, piping or various shapes of metal is necessary. The pure copper braidedshunt allows both high copper alloy jaws to carry welding current. A rugged, all steel body protects the heavy duty spring.

Model MG-180Model EG-200Model EG-300Model EG-500

Item Amp JawModel Code No. Capacity Type of Cable Connection Weight Opening

MG-180 02180 180 Bolt and Nut with Support 6.7 oz. (193g) 2” (51mm)

——

EG-200 02000 200 Bolt and Nut with Support 6 oz. (170g) 1½”(38.1mm)EG-300 02040 300 Bolt and Nut with Support 11 oz. (310g) 2” (51mm)EG-500 02050 500 Bolt and Nut with Support 22 oz. (620g) 2” (51mm)

02055 Replacement Contact Stud w/Nut - EG-500 — —02056 Replacement Double Hump Jaw w/Nut - EG-500 — —

EG-200 EG-300 EG-500MG-180

Economy Ground Clamps

Why Use A Ground Clamp?QUALITY GROUND CLAMPS



SECTION 300

LPG-200 LPG-300

200

300

• Designed Especially for MIG Welding • Reduce Voltage Drop

Item Amp Jaw ThroatModel Code No. Capacity Cable Capacity Type of Cable Connection Weight Opening Depth

MIG-600 02070 600 No.3/0 thru No. 4/0 (70-95mm ) Two Oval-Point Screws 56 oz. (1.6kg) 2” (51mm) 2-1/8” (54mm)

MIG-600-50 02071 600 No.3/0 thru No. 4/0 (70-95mm ) 1/2 - 13 56 oz. (1.6kg) 2” (51mm) 2-1/8” (54mm)

MIG-600-D 02081 600 No.3/0 thru No. 4/0 (70-95mm ) Detachable Cable Connection 62 oz. (1.8kg) 2” (51mm) 2-1/8” (54mm)

2

2

2

MIG-300 MIG-300-D

MIG-600 MIG-600-D

MIG-300 Ground Clamps

MIG-300-50

MIG-600-50

MIG-600 Ground Clamps

• Designed Especially for MIG Welding • Reduce Voltage Drop

LENCO’s ground clamps are designed especially for the MIG welding process. Their powerful bite and swivel pad allowfor low resistance ground connections. They have a full two-inch opening and a copper coated steel pressure screw. The 5/16" (7.9mm)copper coated steel "T" handle makes it easy to apply maximum pressure.

MIG-300/MIG-600

Item Amp Jaw ThroatModel Code No. Capacity Cable Capacity Type of Cable Connection Weight Opening Depth

MIG-300 02075 300 No. 1/0 thru No. 2/0 (50-70mm ) Single Oval-Point Screw 23 oz. ( 648.5g) 2” (51mm) 1-3/4” (44mm)2

MIG-300-50 02077 300 No. 1/0 thru No. 2/0 (50-70mm ) 1/2 - 13 23 oz. ( 648.5g) 2” (51mm) 1-3/4” (44mm)

MIG-300-D 02082 300 No. 1/0 thru No. 2/0 (50-70mm ) Detachable Cable Connection 33 oz. ( 932.7g) 2” (51mm) 1-3/4” (44mm)

2

2

Item Code No. Description

05260 Quick Detachable Female End Only - MIG-300-D, MIG-600-D and G-50

05261 Quick Detachable Male End Only - MIG-300-D, MIG-600-D and G-50

05345 Insulating Cover (Black) Standard Cable Fitting - MIG-600

02079 1/2 - 13 Screw

GROUND CLAMPS



Apply up to 2,000 lbs. (907kg) pressure with the heavy duty pressure screw. The “G” and G-1500 are cast out of a heavy alloy material designed for highamperage applications. The design maximizes surface contact area which provides cool and efficient operation. The G-1500 can also be used withLENCO’s R-4C & LRG Series Rotary Grounds (see page 12).

• Reduce Voltage Drop

Item Amp Type of Jaw ThroatModel Code No. Capacity Cable Connection Weight Opening Depth Cable Capacity

G 02060 600 Two Oval-Point Screws 70.4 oz.(2kg) 3-3/8” (85.7mm) 3-1/8” (79mm) No.3/0 thru No.4/0(70-95mm )

G-1500-34 02230 1500 3/4 - 10 9.5 lbs.(4.3kg) 3” (76.2mm) 3” (76.2mm) N/A

G-1500-138 02240 1500 1-3/8 - 6 9.5 lbs.(4.3kg) 3” (76.2mm) 3” (76.2mm) N/A

2

G-50 02061 600 1/2 - 13 70.4 oz.(2kg) 3-3/8” (85.7mm) 3-1/8” (79mm) No.3/0 thru No.4/0(70-95mm )2

Model “G”

Model “G”/G-1500 Ground Clamps

Model G-50 Model G-1500-34

Item Amp Type of Jaw ThroatModel Code No. Capacity Cable Connection Weight Opening Depth Cable Capacity

RBG1500-4/40 02620 1500 8 Oval-Point Screws 13.2 lbs.(6.0kg) 4½” (114.3mm) 3” (76.2mm) 4-4/0

RBG1500-34 02610 1500 3/4 - 10 13.8 lbs.(6.3kg) 4½” (114.3mm) 3” (76.2mm) N/A

RBG1500-138 02600 1500 1-3/8 - 7 13.2 lbs.(6.0kg) 4½” (114.3mm) 3” (76.2mm) N/A

RBG1500-2/20 02630 1500 8 Oval-Point Screws 13.6 lbs.(6.2kg) 4½” (114.3mm) 3” (76.2mm) 2-250 MCM

Heavy Duty Ground Clamps - Totally Rebuildable

RBG1500-4/40 RBG1500-138RBG1500-2/20 RBG1500-34

• Heavy Duty fits large diameter pipe & thick plate up to 4-1/2”• Strong steel frame• Heavy copper base for efficient current transfer

• Special larger jaw opening available• Will hold up to 4-4/0 cables or 2-250 MCM cables• Can hold most rotating grounds

Model G-1500-138

HEAVY DUTY GROUND CLAMPS



SECTION 300

MAGNETIC GROUNDS

Item AmpModel Code No. Capacity Type of Cable Connection Weight Cable Capacity

MRG-500 02400 500 Double Oval-Point Screw with Cover 9.5 lbs. (4.3kg) No. 3/0 thru No. 4/0 (70-95mm²)

MSG-500 02300 500 Double Oval-Point Screw with Cover 4 lbs. (1.8kg) No. 3/0 thru No. 4/0 (70-95mm²)

The two LENCO rotary devices shown here, theand the , are combinations of LENCO products toprovide rotating grounds. Both use the Model “C” rotaryclamp. Both are designed to make it easy to attach therotating portion to the work. The units come completelyassembled, ready to attach to the work. They are fieldproven and do an excellent job.

GC-500MIG-600-C

GROUND CLAMP SPECIFICATIONSCable

Item Amp Fitting Jaw ThroatModel Code No. Capacity Thread Type of Cable Connection Weight Opening Depth Cable Capacity

GC-500 02120 500 1/2 - 13 2 Oval-Point Screws, with Cover 8 lbs. (3.6kg) 3-3/8” (85.7mm) 2-1/2”(64mm) No.3/0 thru 4/0(70-95mm )

02121 500 1/2 - 13 Replacement C clamp for GC-500

MIG-600-C 02130 500 1/2 - 13 2 Oval-Point Screws, with Cover 8 lbs. (3.6kg) 2” (51mm) 2-1/8”(54mm) No.3/0 thru 4/0(70-95mm )

02132 500 1/2 - 13 Replacement C clamp for MIG-600-C

— 05345 Insulating Cover (Black) Standard Cable Fitting

2

—

—

2

ROTARY GROUND CLAMPS

LENCO's magnetic grounds offer convenience, efficiency and quality. Both theand are designed to ensure greater efficiency with less overheating due to fewerjunctions. Each allows the operator to keep the ground close to the work area improving theweld quality, decreasing the weld time and increasing operator production output. LENCOmagnetic grounds are designed for up to 4/0 cable for maximum current carrying capacity.(for use on ferrous materials only)

The is designed to be used for turning roll work or any other rotary type weldingwork where cable can become twisted. The covers 12 square inches giving goodstability with approximately 4 inches of actual current carrying contact. The alsohas 12 square inches of contact surface, 3 square inches per side, which can be mounted inany position and still perform efficiently.

MRG-500MSG-500

MRG-500MRG-500

MSG-500

Model “C” Rotary GroundsThe rotary clamp bolts the stationary contact plate directly to the work.The movable contact plate revolves like a “ferris wheel action” and the spring keepstension on the two faces. Current flow is between machined faces. Cables will notbind. The Model “C” can also be installed on the end for rotary work.

MODEL “C”

Item AmpModel Code No. Capacity Type of Cable Connection Weight Cable Capacity

C 02080 500 Double Oval-Point Screws 4 lbs. (1.8kg) No. 3/0 thru 4/0 (70-95mm )

— 05345 Insulating Cover (Black) Standard Cable Fitting

2

Item ItemNo. Code No. Description

1. 02283 Mounting Bolt w/Nut [3/4 - 10 x 6”(152mm)]

2. 02284 Pressure Spring

3. 02286 Bearing-Thrust

4. 02282 Movable Contact Plate

5. 02281 Stationary Contact Plate

6. 01068 Oval-Point Screw (2)

7. 02085 Cable Fitting (1/2 - 13)

8. 02285 Set Screw (5/16 - 18)

5

GC-500MIG-600-C

MSG-500MRG-500

Rotary Stationary

1

8

6

7

2 34

3/4 - 10





SECTION 300

Model LRG-240/LRG-440/LRG-640 Rotating Grounds

LRG-240/LRG-440/LRG-640 Replacement Parts

LRG-240

Conductive Shaft LubricantItem Code No. Description

02590 1 oz. Tube

02591 8 oz. w/Brush Top Can

02592 16 oz. w/Brush Top Can

02593 16 oz. Cartridge for Grease Gun

LENCO introduces an additional series ofRotating Grounds ranging from 800 amp to2000 amperage rating. Each Rotating Groundcan be permanently welded to the work oreasily attached by using the G-1500-138 “C”type clamp.

Item Amp Cable Number ShaftModel Code No. Capacity Type of Cable Connection Capacity of Heads Stud Size Weight

LRG-240 02510 800 (2) Triple Oval-Point Screw Connection 2 EA. 3/0-4/0(70-95mm ) 1 1-3/8” NC 8.75 lbs.(3.97kg)2

LRG-440 02520 1500 (4) Triple Oval-Point Screw Connection 4 EA. 3/0-4/0(70-95mm ) 2 1-3/8” NC 15.25 lbs.(6.92kg)

LRG-640 02530 2000 (6) Triple Oval-Point Screw Connection 6 EA. 3/0-4/0(70-95mm ) 3 1-3/8” NC 21.75 lbs.(9.87kg)

G-1500-138 02240 1500 1-3/8” NC N/A N/A N/A 9.5 lbs. (4.3kg)

2

2

Rotating Mounting Nut Tension Adjustment Insulating Grease Head Tightening Oval-Point CoverModel Casting Shaft w/Oval-Point Screw Screw w/Washers Cover Cup Alignment Pin Bar Screw Screw

LRG-240 02515 02561 02580 02575 02585 02570 02577 02572 02587 01065

LRG-440 02515 02562 02580 02575 02585 02570 02577 02572 02587 01065

LRG-640 02515 02563 02580 02575 02585 02570 02577 02572 02587 01065

LRG-440 LRG-640 LRG-240 w/G-1500-138

Item Amp Jaw Throat

Model Code No. Capacity Type of Cable Connection Weight Opening Depth Cable Capacity

R-4C 02200 1500 (4) Double Oval-Point Screw Connection 23 lbs. (10.4kg) — — No. 3/0 thru 4/0 (70-95mm )

GR-4C 02220 1500 (4) Double Oval-Point Screw Connection 33 lbs. (15.4kg) 3”(76.2mm) 3”(76.2mm) No. 3/0 thru 4/0 (70-95mm )

2

2

Model “R-4C-”/”GR-4C” Rotary Grounds

PRG -48ID/816ID Rotating Internal Pipe Ground ClampsThe LENCO and Groung Clamps are designed for vertical or horizontalpositions of manual, semi-automatic or fully automatic welding applications. The PRG serieshas three pads which, when positioned, make direct contact with the inside of the pipe beingwelded or cut - eliminating the need for additional mounting brackets or threaded assemblies.The PRG Series Ground Clamps utilize the reliable “C” rotary ground that incorporates both astationary and movable contact plate that rotates 360°. The spring keeps tension on the twofaces and is easily adjustable for various applications. By tightening or loosening the flange,The PRG grounds are easily installed or removed.

PRG-48ID PRG-816ID

*Optional Grease GunItem Code No. Description

02571 Grease Fitting - Button Head

02595 Pistol Grease Gun w/Button Head Coupler

02596 Coupler - Button Head

Ground Clamps with Special Grease FittingItem Code No. Description

025101 LRG-240 w/Special Grease Fitting



MODEL "R-4C"REPLACEMENT PARTS LIST

Item ItemNo. Code No. Description1. 02108 Mounting Bolt w/Nut [3/4 - 10 x 7½”(190mm)]2. 02101 Clamp Housing, Threaded3. 02104 Brushes (4)4. 02103 Rotor5. 02102 Clamp Housing, Counterbored6. 02107 Cap Screw (5)7. 02109 Contact Plate8. 02106 Brush Finger Spring (4)9. 02105 Brush Finger (4)

10. 01068 Oval-Point Screw (8)

Item AmpModel Code No. Capacity Description Type of Cable Connection Weight Cable Capacity

PRG-48ID 02700 500 Pipe Rotating Ground; 4”-8” I.D. Pipe Double Oval-Point Screws 10.5 lbs. (4.77kg) No. 3/0 thru No. 4/0 (70-95mm²)

PRG816ID 02710 500 Pipe Rotating Ground; 8”-16” I.D. Pipe Double Oval-Point Screws 14 lbs. (6.36kg) No. 3/0 thru No. 4/0 (70-95mm²)

LENCO rotary grounds stop the twisting of welding cables where the work rotates.

ROTARY GROUND CLAMPS

R-4C

3/4 - 10

GR-4C w/G-1500-34

12

3

45

6

7

10

8

10

Designed for

Horizontal &

Vertical Positio

ns

The advanced design of LENCO cable connectors offers many advantages over older styles. Metal parts are precision machined from heavy,specially shaped brass extrusion. Cam action design of male half connector pulls the two halves tightly together. Connector covers are molded froma special heat and cold resistant material. Covers have no metal liner to rust or corrode. Easily installed with a ¼” (6.35mm) allen wrench.

COVERS ARE AVAILABLE IN

BLACK, RED, YELLOW, PINK, BLUE,GREEN, ORANGE, & WHITE

Colored covers make it easy to locate the connectorsfor field use. Also identify cable leads easily forcontractors and field erectors.

SPECIFICATIONSAmp Standard

Model Cable Connection Capacity Cable Capacity PackLC-10 Single Oval-Point Screw 250 No. 4 thru No. 1/0 (25-50mm²) OneLC-40 Single Oval-Point Screw 350 No. 1/0 thru No. 2/0 (50-70mm²) OneLC-40HD-1/0 Double Oval-Point Screw 350 No. 1/0 OneLC-40HD-2/0 Double Oval-Point Screw 400 No. 2/0 OneLC-40HD Double Oval-Point Screw 500 No. 3/0 thru No. 4/0 (70-95mm²) OneLC-40HD

w/Glass FilledNylon Cover

(50mm²)(70mm²)

Double Oval-Point Screw 500 No. 3/0 thru No. 4/0 (70-95mm²) One

SPECIFICATIONS Item Code No.

Model Description Black Red Yellow Pink Blue Green Orange White WeightComplete Unit 05040 05041 05042 --- --- --- --- --- 9 oz. (255g)

LC-10 Male Half 05043 05044 05045 --- --- --- --- --- 4 oz. (115g)Female Half 05046 05047 05048 --- --- --- --- --- 5 oz. (140g)

05043010504601

Complete Unit 05050 05051 05052 05550 05551 05552 05553 05554 14 oz. (400g)LC-40 Male Half 05053 05054 05055 05555 05556 05557 05558 05559 7 oz. (198g)

Female Half 05056 05057 05058 05560 05561 05562 05563 05564 7 oz. (198g)05053010505601

Complete Unit 05060 05061 05062 05800 05801 05802 05803 --- 15 oz. (425g)LC-40HD Male Half 05063 05064 05065 05810 05811 05812 05813 --- 7 oz. (198g)

Female Half 05066 05067 05068 05820 05821 05822 05823 --- 8 oz. (225g)05063010506601

LC-40HDw/Glass FilledNylon Cover

LTC-40 “T” Connector 05900 05901 LC-40 Male (1); LC-40 Female (2) 11 oz. (310g)

M Bulk Unassembled

F Bulk Unassembled

M Bulk Unassembled

F Bulk Unassembled

M Bulk Unassembled

F Bulk Unassembled

--- --- --- --- --- --- ------ --- --- --- --- --- ---

--- --- --- --- --- --- ------ --- --- --- --- --- ---

Complete Unit 0506004 --- --- --- --- --- --- --- 15 oz. (425g)LC-40HD-1/0 Male Half 0506304 --- --- --- --- --- --- --- 7 oz. (198g)

Female Half 0506604 --- --- --- --- --- --- --- 8 oz. (225g)05063041 --- --- --- --- --- --- ---05066041 --- --- --- --- --- --- ---

Complete Unit 0506005 --- --- --- --- --- --- --- 15 oz. (425g)LC-40HD-2/0 Male Half 0506305 --- --- --- --- --- --- --- 7 oz. (198g)

Female Half 0506605 --- --- --- --- --- --- --- 8 oz. (225g)05063051 --- --- --- --- --- --- ---05066051 --- --- --- --- --- --- ---

--- --- --- --- --- --- ------ --- --- --- --- --- ---

Male Half 05171 --- --- --- --- --- --- --- 6 oz. (170g)Female Half 05175 --- --- --- --- --- --- --- 7 oz. (198g)

M Bulk Unassembled

F Bulk Unassembled

M Bulk Unassembled

F Bulk Unassembled

Cam-type action here makespositive stop & lock Face-to-face contact for maximum conductivity

LTC-40

Female halfcover removed

Female brass connector is recessedto minimize accidental shorting.

Male halfcover removed

Optional - Connector covers maybe custom imprinted.

Designed for extreme heat and impact resistance applications.

CABLE CONNECTORSPositive Lock-Tight Action



LC-40HD w/GLASS FILLED NYLON COVER

14

This plug fits femaleLC-40 or LC-40HD connector

Model LC-10MPFits Miller welders*

®

Model UP-10Fits variety of welders

Century • Powermate • Forney • Others® ® ®

Takes smallcable to 1/0

Whip Cable Connectors

Cam-Lock Style Connectors

The LENCO cable connector reducer consists of the male plug only. The plug end is the same size as the LC-40 connector male end and fits the LC-40female connector. The cable end is the same size as the LC-10 connector and will accept cable size up to No. 1/0 (50mm²).

SPECIFICATIONS

Item Code No.

Model Black Red Cable Connection Maximum Cable Capacity Weight

LC-1040 05070 05071 Oval-Point Screw No. 1/0 (50mm²) 6 oz. (170g)

LC40HD-1/0 0506304 N/A Double Oval-Point Screw No. 1/0 (50mm²) 7 oz. (198g)

Machine Plugs

LENCO machine plugs are designed to fit welding machines using long tapered plug and receptacle. Oval-point screw cable connectionensures a fast and secure method of attaching the cable to the plug. Two types are available, the LC-10MP and the UP-10, both with red orblack cover.

SPECIFICATIONSItem Code No.

Model Black Red Cable Connection Cable Capacity Taper Dimension Taper Length Weight

LC-10MP 05080 05081 Single Oval-Point Screw No. 4 thru No. 1/0 (25-50mm²) .330-.352 (8.4-8.9mm) 1.062” (27mm) 4 oz. (115g)

UP-10 05270 05271 No. 4 thru No. 1/0 (25-50mm²) .364-.385 (9.2-9.8mm) 1.000” (25.4mm) 4 oz. (115g)

*Can be used to replace Miller part no. 039-608 (Red) and 039-901 (Black)

Single Oval-Point Screw

Male Half 05920 05921 250 No. 2 thru 1/0 Single Oval-Point Screw E1012-62 (Black) E1012-61 (Red) 039629

Female Half 05925 05926 250 No. 2 thru 1/0 Single Oval-Point Screw n/a 039633

Male Half 05930 05931 350 1/0 thru 2/0 Single Oval-Point Screw E1012-64 (Black) E1012-63 (Red) 039630

Female Half 05935 05936 350 1/0 thru 2/0 Single Oval-Point Screw E1012-72 (Black) E1012-71 (Red) 039633

Male Half 05940 05941 500 3/0 thru 4/0 Double Oval-Point Screw E1012-66 (Black) E1012-65 (Red) 039639

Female Half 05945 05946 500 3/0 thru 4/0 Double Oval-Point Screw E1012-74 (Black) E1012-73 (Red)

SPECIFICATIONS Item Code No. Amp Cable Interchangable with the following

Model Description Black Red Capacity Capacity Cable Connection Cam-Lok Miller®

LC-CAM-1

LC-CAM-2

LC-CAM-4

Lenco is in no way affiliated with Crouse-Hinds. The parts advertised for sale are not genuine Crouse-Hinds parts, but are parts manufactured by Lenco

How Cable Connectors Save Time and MoneyCABLE CONNECTORS



SECTION 300

Adapters & Receptacles

Item Code No. Male End Interchangable withModel Description Black Red Diameter Fits Cable Connector Miller

LDPM-25 Panel Receptacle (Female) 08105 N/A .355 (9.0mm) LDP-25M N/ALDPM-50 08106 N/A .508 (12.9mm) LDP-50/70/95M 129525LDPM-50-M 08108 N/A .508 (12.9mm) LDC-50/70/95 Female 143419LCPM-40 Panel Receptacle (Female) 08104 N/A N/A LC-40/LC-40HD N/A

Panel Receptacle (Female)Panel Receptacle (Male)

Mirror forback view

Item Code No. Male End InterchangeableModel Set Black Red Diameter Cable Capacity with Miller

LDA 05335 05330 05331 .508 (12.9mm) One Piece Adapter ( Type Male/LENCO LC-40/LC-40HD Female) 042465LDA-10 05334 05332 05333 .508 (12.9mm) One Piece Adapter ( Type Male/LENCO LC-10 Female)LDA-CAM - 053304 053314 .508 (12.9mm) One Piece Adapter ( Type Male/CAM-LOCK Female) 042466LDA-2510 05339 05336 05337 .355 (9.0mm) One Piece Adapter ( Type Male/LENCO LC-10 Female)LDA-2540 - 053364 053374 .355 (9.0mm) One Piece Adapter ( Type Male/LENCO LC-40 Female)LDA-25CAM - 053305 053315 .355 (9.0mm) One Piece Adapter ( Type Male/CAM-LOCK Female)

DinseDinseDinseDinseDinseDinse

LA-1040 - 05075 05076 LC-10 Male One Piece Adapter (LC-10 Male/LC-40 Female)LDA-4050 - 05470 05471 LC-40 Male One Piece Adapter (LC-40 Male/ LDC-50 Female) 195116LDA-513 - 05475 - .508 (12.9mm) One Piece Brass Adapter ( Type Male/½-13 Male Thread)

DinseDinse

LDPM-50

LDA-513

LDPM-50-MLDPM-25

LDA-2510

Item Code No. Male EndModel Description Black Red Diameter Cable Capacity Cable Connection Amp Capacity Weight

Complete Unit 05420 05421 3.8 oz. (109g)LDC-25 Male Half 05423 05424 .355 (9.0mm) No. 8 thru. No. 4 (10-25mm ) Single Oval-Point Screw 150 1.9 oz. (55g)

Female Half 05426 05427 1.9 oz. (55g)Complete Unit 05430 05431 14 oz. (400g)

LDC-50 Male Half 05433 05434 .508 (12.9mm) No. 4 thru.No. 1/0 (25-50mm ) Single Oval-Point Screw 250 7 oz. (198g)Female Half 05436 05437 7 oz. (198g)

Complete Unit 05440 05441 14 oz. (400g)LDC-70 Male Half 05443 05444 .508 (12.9mm) No. 1/0 thru.No. 2/0 (50-70mm ) Single Oval-Point Screw 350 7 oz. (198g)

Female Half 05446 05447 7 oz. (198g)Complete Unit 05450 05451 15 oz. (425g)

LDC-95 Male Half 05453 05454 .508 (12.9mm) No. 3/0 thru.No. 4/0 (70-95mm ) Double Oval-Point Screw 500 7 oz. (198g)Female Half 05456 05457 8 oz. (225g)

2

2

2

2

LDC-25 LDC-50/70/95

• Offering 11 type Tig machine plugs to attach most TIG torches to machines equipped with connections.• Available for both air cooled and water cooled Tig torches.

Dinse Dinse

International StyleDINSE

CABLE CONNECTORS



LDA

Model Item Code No. Hose Color Description Length Thread ConnectionLGH-18RH 09810 Black Gas Hose 18” 5/8-18 R.H. NutLGH-96RH 09820 Black Gas Hose 96” 5/8-18 R.H. NutLWH-18LH 09815 Red Water Hose 18” 5/8-18 L.H. NutLWH-96LH 09825 Red Water Hose 96” 5/8-18 L.H. Nut

Both hoses are nylon braided.

LGH-Series used on the following:

Model Item Code No. Tig Torch Model Male End Dia. Power Cable Connection Barb O.D.LDT-917-F 05610 9, 17 .508 (12.9mm) 3/8-24 (M) Air Cooled 1/4-90° w/Boot

LDT-24-M 05615 24 .508 (12.9mm) 3/8-24 (F) Air CooledLDT-26-R 05620 26 .508 (12.9mm) 7/8-14 (R.H.) Air Cooled

LDT-1820-L 05625 18, 20 .508 (12.9mm) 7/8-14 (L.H.) Water CooledLDTI-1820-WC 05627 18, 20, 24W .508 (12.9mm) 7/8-14 (L.H.) Water CooledLDTS-917-F 05650 9, 17 .355 (9.0mm) 3/8-24 (M) Air CooledLDTSI-917-F 056501 9, 17 .355 (9.0mm) 3/8-24 (M) Air Cooled

LDTI-917-F 05612 9, 17 .508 (12.9mm) 3/8-24 (M) Air Cooled (in line) N/ALDTS-24-M 05655 24 .355 (9.0mm) 3/8-24 (F) Air Cooled 1/4-90° w/BootLDTSI-24-M 056551 24 .355 (9.0mm) 3/8-24 (F) Air Cooled N/A

1/4-90° w/Boot1/4-90° w/Boot

LDTI-26-R 05622 26 .508 (12.9mm) 7/8-14 (R.H.) Air Cooled (in line) N/A1/4-90° w/Boot

(in line) 1/8,3/16,1/4-90° w/Boots1/4-90° w/Boot

(in line) N/A

LWH-Series used on the following:

LGH-Series & LWH-SeriesUsed on the following:

LDT-1820-L

LDTI-1820-WC

Gas & Water Hose Connectors

LDT-917-FLDT-24-MLDT-26-RLDTS-24-MLDTS-917-F

LDP-25M

Today more welding power sources are equipped with International style connectors for secondary connections. LENCO now offersInternational type machine plugs for use with No. 8(10mm²) through 4/0(95mm²) AWG size cable.Dinse

Item Code No. Interchangeable with the following models Miller

Model Set Black Red ESAB/Airco Lincoln M.K. Product Female MaleDinse

LDP-25M 05289 05283 05284 Dix SK 25 160360895 S19301-6 N/A 127835 127836

LDP-50M 05309 05303 05304 Dix SK 50 N/A N/A N/A 129526 129527/042418

LDP-70M 05319 05313 05314 Dix SK 70 13792513 K-852-70 153-0755 136600 134460/042533

LDP-95M 05329 05323 05324 Dix SK 95 13792513 K-852-95 N/A 138180 138181/042574

Point of Purchase Display Packaging (Black & Red)

Connector Size Male Plug Dia. Cable Capacity Type of Cable Connection Amp Capacity

All 25 .355 (9.0mm) No. 8 thru No. 4 (10-25mm ) Single Oval-Point Screw 150All 50 .508 (12.9mm)All 70 .508 (12.9mm) 1/0All 95 .508 (12.9mm) 2/0

2

No. 4 thru No. 1/0 (25-50mm ) Single Oval-Point Screw 250thru No. 2/0 (50-70mm ) Single Oval-Point Screw 350thru No. 4/0 (10-25mm ) Double Oval-Point Screw 500

2

2

2

DinseDinse

LENCO also offers 9 one-piece adapters which have a type male ([power source] .355[9.0mm] or .508[12.9mm] dia.) on one end and a LENCO femaleLC-10, LC-40/LC-40HD, Cam-Lock, or 1/2-13 male thread on the opposite end.

MACHINE PLUGS & TIG ADAPTERSInternational StyleDINSE



SECTION 300

LDP-50/70/95M

Dinse Cable & TIG Machine Plug Application

Maxstar 85S, 150S Tig/Stick LDP-25M LDTS-24-M LDTS-917-F n/r n/r n/r n/rMaxstar 140STR LDP-25M LDTS-24-M LDTS-917-F n/r n/r n/r n/rMaxstar 150 STL & STH LDP-25M LDTSI-24-M LDTSI-917-F LDTSI-917-F n/r n/r n/rMaxstar 200 LDP-50M n/r LDT-917-F LDT-917-F LDT-26-R LDT-1820-L n/rMaxstar 200 STR LDP-50M n/r LDT-917-F LDT-917-F n/rMaxstar 200SD LDP-50M n/r LDT-917-F LDT-917-F n/rMaxstar 200DX & LX LDP-50M n/r LDT-917-F LDT-917-F n/rMaxstar 250 T LDP-50M n/r n/r LDT-917-F LDT-26-R LDT-1820-L n/rMaxstar 300 LDP-70M n/r n/r LDT-917-F LDT-26-R LDT-1820-L LDT-1820-LMaxstar 350 LDP-70M n/r DT-917-F LDT-26-R LDT-1820-LEconotig LDP-50M n/r LDTI-917-F LDTI-917-F LDTI-26-R n/r n/rDynasty 200-SD & DX LDP-50M n/r LDT-917-F LDT-917-F LDT-26-R LDT-1820-L n/rDynasty 350300SD/DX/LX LDP-70M n/r n/r LDT-917-F LDT-26-R LDT-1820-L LDT-1820-LSyncrowave 180SD & 200 LDP-50M n/r LDTI-917-F LDTI-917-F LDTI-26-R LDTI-1820-WCSyncrowave 250DX

CST 250, 300 LDP-50M n/r LDT-917-F LDT-917-F LDT-26-R LDT-1820-L LDT-1820-LInvision 354 MP Mig/Stick/Gouging LDP-70M n/r n/r LDT-917-F LDT-26-R LDT-1820-L LDT-1820-LXMT 304, 350 Mig/Tig/Stick LDP-70M n/r n/r LDT-917-F LDT-26-R LDT-1820-L LDT-1820-L

Invertec V100-S Tig/Stick LDP-25M LDTS-24-M LDTS-917-F n/r n/r n/r n/rInvertec V130-S LDP-25M LDTS-24-M LDTS-917-F LDTS-917-F n/r n/r n/rInvertec V160-S LDP-50M n/r LDTI-917-F LDTI-917-F LDTI-26-R n/r n/rInvertec V160-T LDP-50M n/r LDT-917-F LDT-917-F LDT-26-R n/r n/rInvertec V205-T LDP-50M n/r LDTI-917-F LDTI-917-F LDTI-26-R n/r n/rInvertec V250-S LDP-50M n/r LDT-917-F LDT-917-F LDT-26-R LDT-1820-L LDT-1820-LInvertec V275-S LDP-70M n/r LDTI-917-F LDTI-917-F LDTI-26-R LDTI-1820-L LDTI-1820-LSquare Wave Tig 175 LDP-50M n/r LDTI-917-F LDTI-917-F LDTI-26-R n/r n/rSquare Wave Tig 275 LDP-70M n/r n/r LDTI-917-F LDTI-26-R LDTI-1820-WC LDTI-1820-WCInvertec STT II Mig LDP-70M n/a n/a n/a n/a n/a n/aCV-250, 300 Mig LDP-70M n/a n/a n/a n/a n/a n/aPower Wave 355 Mig/Tig/Stick LDP-70M n/r LDT-917-F LDT-917-F LDT-26-R LDT-1820-L LDT-1820-LInvertec V300-Pro LDP-70M n/r LDT-917-F LDT-917-F LDT-26-R LDT-1820-L LDT-1820-LInvertec V350-Pro LDP-70M n/r LDT-917-F LDT-917-F LDT-26-R LDT-1820-L LDT-1820-L

Dragster 80 Tig/Stick LDP-25M n/r LDTS-917-FP-Wee 85SP-Wee 130SP-Wee 130GTSP-Wee 190SP-Wee 200GTSP-Wee 250GTSPro-Lite 260S, LS-300Pro-Wave 300GTSWPro-Wave 400GTSWPro-Plus 400SPro-Plus 400GTSFabricator 210, 250 MigPro-Lite LM-300 Mig/Tig/StickPro-Plus 400GMSUltra-Flex 350 Pulse

Maxstar 200 SD Tig/StickEX300 Mig/Tig/StickEX300in/a = not applicable n/r = not recommended Note Invertec series with optional solenoid valve uses LDTI series adapters.

Dinse Tig Connector Series

Power Supply Type of Connector 24 9 17 26 20 18Make & Model Process Male 80A 125A 150A 200A 250A 350A

Miller

Lincoln

Thermal Arc

Red-D-Arc

Tig Torch ModelsCable Air Cooled Water Cooled

LDT-26-R LDT-1820-LLDT-26-R LDT-1820-LLDT-26-R LDT-1820-L

LDT-917-F L LDT-1820-L

LDP-70M n/r LDT-917-F LDT-917-F LDT-26-R LDT-1820-L LDT-1820-L

LDTI-1820-WCLDP-50M n/r LDT-917-F LDT-917-F LDT-26-R LDT-1820-L LDT-1820-L

Syncrowave 350LX LDP-70M n/r LDT-917-F LDT-917-F LDT-26-R LDT-1820-L LDT-1820-L

n/r n/r n/r n/rLDP-25M n/r LDTS-917-F n/r n/r n/r n/rLDP-25M n/r LDTS-917-F LDTS-917-F n/r n/r n/rLDP-25M n/r LDTS-917-F LDTS-917-F n/r n/r n/rLDP-50M n/r LDT-917-F LDT-917-F n/r n/r n/rLDP-50M n/r LDT-917-F LDT-917-F LDT-26-R LDT-1820-L n/rLDP-50M n/r LDT-917-F LDT-917-F LDT-26-R LDT-1820-L n/rLDP-50M n/r LDT-917-F LDT-917-F LDT-26-R LDT-1820-L LDT-1820-LLDP-70M n/r n/r LDT-917-F LDT-26-R LDT-1820-L LDT-1820-LLDP-70M n/r n/r n/r LDT-26-R LDT-1820-L LDT-1820-LLDP-70M n/r n/r n/r LDT-26-R LDT-1820-L LDT-1820-LLDP-70M n/r n/r n/r LDT-26-R LDT-1820-L LDT-1820-LLDP-50M n/a n/a n/a n/a n/a n/aLDP-70M n/r n/r n/r LDT-26-R LDT-1820-L LDT-1820-LLDP-70M n/r n/r n/r LDT-26-R LDT-1820-L LDT-1820-LLDP-70M n/r n/r n/r LDT-26-R LDT-1820-L LDT-1820-L

LDP-50M n/r LDT-1917-F LDT-1917-F n/r n/r n/rLDP-70M n/r n/r LDT-1917-F LDT-26-R LDT-1820-L n/rLDP-70M n/r n/r LDT-1917-F LDT-26-R LDT-1820-L n/r

Dinse

®

®

®

®

Tig Machine ConnectorsInternational TypeDinse




Model Black Red Used with LENCO Connector Stud Thread

LSC-10 08050 08051 LC-10 Male 1/2 - 13

LSC-40 08060 08061 LC-40 or LC-40HD Male 1/2 - 13

LSC-3040 08080 08081 No. 3/0 thru No. 4/0 (70-95mm ) 1/2 - 13

Double Oval-Point Screw

LDSC-50 08150 08151 LDC-50/70/95 Male 1/2 - 13

2


Model Black Red Used with LENCO Connector Stud Thread

LSC-40-H 08070 08071 LC-40 or LC-40HD Male 1/2 - 13

H 05263 05264 Insulator Cup

LSC-3040H 08090 08091 No. 3/0 thru No. 4/0 (70-95mm ) 1/2 - 13

Double Oval-Point Screw

LDSC-50-H 08155 08156 LDC-50/70/95 Male 1/2 - 13

2

Shown below are four different styles of LENCO stud connectors which offer welder terminal protection. They also offer the advantages ofcomplete, quick removal of the entire leads; quick change of polarity and the ability to add on cable or take off cable quickly when used withLENCO cable connectors. They are used in place of lugs and screw directly on studs of the welder.

MODELS LSC-10 and LSC-40Designed for power sources having

stud type terminals. This model offersinsulation for those having this typeterminal.

A better connectionCompletely insulatedA threaded, face-to-face contact withthe power source terminalUse with male LENCO cableconnector LC-10 or LC-40

•••

•

MODELS LSC-40-HDesigned for power sources having

a solid bus bar. Place cup-typeinsulation over the stud terminal andsecure connector tightly in place.

Face of brass recessed minimalchance of shorting outUse with LC-40 or LC-40HD maleconnectorUse the LC-1040 for small cable

•

•

•


Model Black Red Description Stud Thread

TPO 08100 08101 Terminal, Power Output 1/2 - 13

(039046) (039047)

Power Output TerminalsPower output terminals suitable for replacement on Miller power sources.

®

SPECIFICATIONSItem

Model Code No. Description Stud Thread

LSA 08210 Lincoln Stud Assembly w/Hardware 1/2 - 13

(T14166-9 [M13900])

LSA-1 08211 Stud Assembly Complete (S11125-1) 1/2 - 13

Connector Terminals• LENCO

LENCOconnector terminals offer you the advantage of quickly connecting or disconnecting welding cable at the power source.

• LDCT-50FA/FS are designed for male type connectors.Dinse• Add On Cable

• Take Off Cable

• Change Polarity

Connector terminals are used in place of solder-typelugs and secured directly to the studs of the welder. Themale half of a LENCO cable connector is attached towelding cable and is inserted into the terminal.

SPECIFICATIONSItem Code Used with Stud Hole

Model Number Style LENCO Connector Weight Diameter

CT-10FA 08010 Angle LC-10 Male 5 oz. (140g) 17/32” (13.5mm)

CT-10FS 08020 Straight LC-10 Male 5 oz. (140g) 17/32” (13.5mm)

CT-40FA 08030 Angle LC-40 or LC-40HD Male 8 oz. (230g) 17/32” (13.5mm)

CT-40FS 08040 Straight LC-40 or LC-40HD Male 17/32” (13.5mm)8 oz. (230g)

LDCT-50FA 08110 Angle LDC-50/70/95 Male 8 oz. (230g) 17/32” (13.5mm)

LDCT-50FS 08120 Straight LDC-50/70/95 Male 8 oz. (230g) 17/32” (13.5mm)

CT-10FS(STRAIGHT - 180°)

LDCT-50FA(ANGLE - 45°)

TPO LSA-1LSA

WELDING ACCESSORIESInsulated Stud Connectors



SECTION 300

L-1(L-25) L-12

L-1020L-3040

LM-610A(ANGLE-45°)

• LENCO Cable Lugs Make Positive Cable Connection to the Welder

SPECIFICATIONS

Model Item Code No. Style Cable Capacity Weight Stud Hole

Without Insulator

With Insulator

LM-610A 07040 Angle No. 6 thru 1/0 (16-50mm²) 4 oz. (115g) 17/32” (13.5mm)

LM-610S 07050 Straight No. 6 thru 1/0 (16-50mm²) 4 oz. (115g) 17/32” (13.5mm)

LM-2040A 07060 Angle No. 2/0 thru 4/0 (50-95mm²) 7 oz. (200g)

LM-2040S 07070 Straight No. 2/0 thru 4/0 (50-95mm²) 7 oz. (200g)

LM-2040S-HD 07120 Straight No. 2/0 thru 4/0 (50-95mm ) 20 oz. (570g) 21/32” (16.8mm)

LM-2040S-HD-34 07140 Straight No. 2/0 thru 4/0

LM-610AI 07080 Angle No. 6 thru 1/0 (16-50mm²) 5 oz. (140g)

LM-610SI 07090 Straight No. 6 thru 1/0 (16-50mm²) 5 oz. (140g) 17/32” (13.5mm)

LM-2040AI 07100 Angle No. 2/0 thru 4/0 (50-95mm²) 8 oz. (230g)

LM-2040SI 07110 Straight No. 2/0 thru 4/0 (50-95mm²) 8 oz. (230g)

17/32” (13.5mm)

17/32” (13.5mm)

²

(50-95mm²) 21 oz. (600g) 25/32” (20mm)

17/32” (13.5mm)

17/32” (13.5mm)

17/32” (13.5mm)

LM-2040SI-HD 07130 Straight No. 2/0 thru 4/0 (50-95mm²) 20 oz. (570g) 21/32” (16.8mm)

LM-2040SI-HD-34 07150 Straight No. 2/0 thru 4/0 (50-95mm²) 21 oz. (600g) 25/32” (20mm)

• Made Special For Welding Cable Use

SPECIFICATIONS POWER CABLE LUGS

WELDING CABLE LUGS

Model Item Code No. Cable Capacity Stud Hole Barrel I.D. Weight per 100

L-8 06980 No. 12 thru No. 14 (3-2mm²) 13/64” (5.16mm) .185” (4.7mm) 1.1 lbs. (.42kg)

L-6 06985 No. 8 thru No. 10 (10-6mm²) 13/64” (5.16mm) .232” (6mm) 1.3 lbs. (.53kg)

L-4 06990 No. 6 thru No. 8 (16-10mm²) 21/64” (8.3mm) .286” (7.3mm) 1.9 lbs. (.78kg)

L-2 06995 No. 4 thru No. 6 (25-16mm²) 21/64” (8.3mm) .336” (8.5mm) 2.8 lbs. (1.2kg)

L-26 07005 No. 2 thru No. 6 (35-16mm²) 21/64” (8.3mm) .344” (8.7mm) 4 lbs. (1.7kg)

L-1 (L-25) 07000 No. 2 thru No. 6 (35-16mm²) 17/32” (13.5mm) .360” (9mm) 4.7 lbs. (2.1kg)

L-12 07010 No. 1 thru No. 2 (50-35mm²) 17/32” (13.5mm) .402” (10.2mm) 5 lbs. (2.2kg)

L-1020 07020 No. 1/0 thru No. 2/0 (50-70mm²) 17/32” (13.5mm) .495” (12.6mm) 10 lbs. (4.3kg)

L-3040 07030 No. 3/0 thru No. 4/0 (70-95mm²) 17/32” (13.5mm) .620” (15.7mm) 14 lbs. (6.3kg)

LM-610AI(ANGLE-INSULATED-45°)

LM-610S(STRAIGHT-180°)

LM-610SI(STRAIGHT-INSULATED-180°)

These mechanical lugs replace the ordinary solder lug for attaching welding cable to a welder. They are heavy duty cast copper alloy to take today'shigher amperages. Cable is easily attached using large oval-point screw connection driven down with a ¼” (6.35mm) allen wrench.

LENCO cable lugs are precision made from copper tubing. They have an extra long barrel for easy soldering or attaching by the swedg-on process. Thestud holes are made especially for welding machines with plenty of clearance. Flared ends make it easy to insert the cable in the lug.

Welding Cable Lugs

LM-2040S-HD(STRAIGHT-180°)

CABLE LUGSMechanical Cable Lugs



L-8L-6

L-4 L-2L-26

Mechanical Cable Splicers

• Splice Cable Fast, Easy — Anywhere

SPECIFICATIONS

CS-610 06010 Single Oval-Point Screw 250 No. 6 thru No. 1/0 (16-50mm²) 3¾” (95mm) 4 oz. (115g)

CS-2040 06020 350 No. 1/0 thru No. 2/0 (50-70mm²) 4¼” (108mm) 7 oz. (200g)

CS-3040 06030 Double 500 No. 3/0 thru No. 4/0 (70-95mm²) 6” (152mm) 12 oz.(340g)

Note: All cable splicers

Model Item Code No. Cable Connection Amp Capacity Cable Capacity Length Weight

Single Oval-Point Screw

Oval-Point Screw

must be properly insulated.

Welding Cable Splicers

LENCO welding cable splicers are made from copper tube. They are attached to welding cable with the swedg-on tool. LENCO weldingcable splicers are ideal for connecting broken lengths of cable, making repairs and adding on cable for longer runs.

SPECIFICATIONS

Model Item Code No. Cable Capacity Splicer I.D. Length Weight per 100

S-12 06110 No. 1 thru No. 2 (50-35mm²) .402 (10.2mm) 2.37” (60mm) 4 lbs. (1.8kg)

S-1020 06120 No. 1/0 thru No. 2/0 (50-70mm²) .495 (12.6mm) 2.92” (74mm) 9 lbs. (4.1kg)

S-3040 06130 No. 3/0 thru No. 4/0 (70-95mm²) .620 (15.7mm) 3.25” (83mm) 12 lbs. (5.4kg)

Note: All Cable Splicers must be properly insulated.

Swedg-On ToolThe LENCO swedg-on tool provides an easy and simple way to installLENCO cable lugs and cable splicers to welding cable. Bare cable strands,insert in the lug barrel and impact with the swedg-on tool as shown in theillustration. All you need is this tool and a hammer. FEATURES

• Lugs and splicers are secured by springtension during installation

• Capable of using on a full variety of lugsand splicers

• Wide base for stability while swedging• Provides 1400-1800 lbs. pull-out

resistance• Easy to read scale for proper swedging

SPECIFICATIONS

Model Item Code No. For Installing LENCO Lugs LENCO Splicer

120 04010 L-12 & L-1020 S-12 & S-1020

30 04020 L-3040 S-3040

MODEL S-3040MODEL S-12 MODEL S-1020

SPECIFICATIONS

Model Item Code No. For Installing LENCO Lugs LENCO Splicer

840 04040 L-8 thru L-3040 S-12 thru S-3040

Universal Heat Shrink

SPECIFICATIONS

Model Item Code No. Description Cable Capacity I.D. Length

HS-I 06140 Universal heat shrink with adhesive to fit above splicers No. 4 thru No. 4/0 (25-95mm ) 1.0 (25.4mm) 5.00” (127mm)²

LENCO cable splicers are made from a special brass extrusion. Large oval-point steel screws on each end of the splicers make it easy tosplice cables in the shop or in the field. Tough glass filled nylon sleeve insulates the splicer.

“AF”/”HT” SeriesCABLE SPLICERS



SECTION 300

ITEM CODE # LENCO MODEL # PAGE(S) ITEM CODE # LENCO MODEL # PAGE(S)

...

01010 Electrode Holder (AF-1) 301011 Handle (AF-1) 301020 Electrode Holder (AF-2) 301021 Upper Body Tong (AF-1/AF-2) 301022 Lower Body Tong w/screw (AF-2/HT-2) 301023 Handle (AF-2) 301025 Oval-Point Screw 3,601026 Spring Set w/Insulators (AF-1/AF-2) 301027 Spring Cup Insulator (AF-1/AF-2) 301030 Electrode Holder (AF-25) 301031 Upper Body Tong (AF-25) 301032 Lower Body Tong w/screw (AF-25/HT-25) 301033 Handle (AF-25) 301034 Spring Set w/Insulators (AF-25) 301040 Electrode Holder (AF-3) 301041 Lower Body Tong w/screw (AF-3/HT-3) 301042 Handle (AF-3) 301050 Electrode Holder (AF-35) 301051 Upper Body Tong (AF-3/AF-35/AF-50) 301052 Lower Body Tong w/screw (AF-35/HT-35) 301053 Handle (AF-35) 301054 Spring Set w/Insulators (AF-3/AF-35) 301060 Electrode Holder (AF-50) 301062 Lower Body Tong w/screw (AF-50/HT-50) 301065 Tip Insulator Screws (dozen) (AF/HT Series) 3,1201066 Handle (AF-50) 301068 Oval-Point Screw 3,10,1201069 Spring Set w/Insulators (AF-50) 301070 Spring Flat Insulator (AF-25/HT-25 thru AF-50/HT-50) 301071 Spring Cup Insulator (HT-2/AF-25/AF-3/AF-35/AF-50) 301160 Rotating Display W/Product N/S01165 Rotating Display w/Stocking Order N/S01214 Hinge Pin (AF-1/AF-2/HT-2/AF-25/HT-25) 301222 Lower Body Tong w/screw (AF-1) 301223 Hinge Pin (AF-3/HT-3/AF-35/HT-35/AF-50/HT-50) 301225 Oval-Point Screw 301284 Spring Cover (LT-400) 601285 Non-Conductive Screw (1/4” - 20 x 3/8”)-Medium N/S01286 Spring Coil (LT-400) 601290 Electrode Holder (TT-6S) 601295 Replacement Head Assembly (RH-6S) 601320 Electrode Holder (HT-2) 301321 Upper Body Tong (HT-2) 301323 Handle (HT-2) 301324 Spring Set w/Insulators (HT-2) 301325 Tip Insulator w/screw (AF-1/AF-2/HT-2/AF-25/HT-25) 301330 Electrode Holder (HT-25) 301331 Upper Body Tong (HT-25) 301333 Handle (HT-25) 301334 Spring Set w/Insulators (HT-25/HT-3/HT-35) 301335 Tip Insulator w/screw (AF-3/HT-3/AF-35/HT-35/AF-50/HT-50) 301337 Spring Cup Insulator (HT-25/HT-3/HT-35/HT-50) 301340 Electrode Holder (HT-3) 301341 Upper Body Tong (HT-3/HT-35/HT-50) 301343 Handle (HT-3) 301350 Electrode Holder (HT-35) 301353 Handle (HT-35) 301360 Electrode Holder (HT-50) 301363 Handle (HT-50) 301364 Spring Set w/Insulators (HT-50) 301400 Replacement Head Assembly (RHA-400) 601410 Electrode Holder (LT-400) 601420 Electrode Holder (LT-250) 601422 Head Insulator (LT-250) 601423 Pressure Pin (LT-250) 6

01424 Handle (LT-250) 601425 Spring Cup Washer (LT-250) 601426 Spring Coil (LT-250) 601427 Head Member (LT-250) 601430 Replacement Head Assembly (RHA-250) 601432 Brass Body w/Screws (LT-250) 601472 Head Insulator (LT-400) 601474 Handle (LT-400) 601477 Head Member (LT-400) 601481 Pressure Pin (LT-400) 601482 Brass Body w/Screws (LT-400) 601485 Screw, Head Insulator & Pressure Pin (LT-400) 601525 Isolator w/Cable (IS-25) 701555 Isolator w/Cable (ISH-25) 7016250 Electrode Holder (250-I) 4,5016251 Bottom Jaw Insulator (250-I) 50162510 Guard (250-I) 50162512 Screw for Handle (250-I) 5016256B-100 Screws for Jaw Insulation - 100 pcs (250-I/300-I) 5016256B-6 Screws for Jaw Insulation - 6 pcs (250-I/300-I) 50162514 Allen Wrench 50162515 Set Screw for Core (1) (250-I/300-I/400-I/600-I) 50162516 Brass Foil (250-I/300-I/400-I/600-I) 50162517 Brass Curved Piece (250-I/300-I/400-I/600-I) 5016252 Top Jaw Insulator-Large (250-I) 5016253 Top Jaw Insulator-Small (250-I) 5016254 Jaws - Plain (upper & lower) (250-I) 5016255 Jaws with Insulators (250-I) 5016256 Trigger - Plain (250-I/300-I/400-I/600-I) 5016256A Trigger Insulator Cover (250-I/300-I/400-I/600-I) 5016256B-6 Trigger Insulator Screw (250-I/300-I/400-I/600-I) 5016257 Brass Core w/ Hardware (250-I) 5016258 Trigger w/ Insulator (250-I/300-I/400-I/600-I) 5016259 Handle (250-I) 5016300 Electrode Holder (300-I) 4,5016301 Bottom Jaw Insulator (300-I) 5016302 Top Jaw Insulator-Large (300-I) 5016303 Top Jaw Insulator-Small (300-I) 5016304 Jaws - Plain (upper & lower) (300-I) 5016305 Jaws with Insulators (300-I) 5016307 Brass Core w/ Hardware (300-I) 5016309 Handle (300-I) 5016310 Guard (300-I) 5016311 Rubber Insulator for handle Screw (300-I/400-I/600-I) 5016312 Screw for Handle (300-I/400-I/600-I) 5016400 Electrode Holder (400-I) 4,5016401 Bottom Jaw Insulator (400-I/600-I) 5016402 Top Jaw Insulator-Large (400-I/600-I) 5016403 Top Jaw Insulator-Small (400-I/600-I) 5016404 Jaws - Plain (upper & lower) (400-I/600-I) 5016405 Jaws with Insulators (400-I/600-I) 5016407 Brass Core w/ Hardware (400-I) 5016409 Handle (400-I) 5016410 Guard (400-I/600-I) 5016413-100 Screws for Jaw Insulation - 100 pcs (400-I/600-I) 5016413-6 Screws for Jaw Insulation - 6 pcs (400-I/600-I) 5016600 Electrode Holder (600-I) 4,5016607 Brass Core w/Hardware (600-I) 5016609 Handle (600-I) 5016614 Allen Wrench 5016615 Set Screw for Core (2) (600-I) 501700 Electrode Holder Short (EB-250S) 601710 Electrode Holder Long (EB-250L) 602000 Ground Clamp (EG-200) 802010 Ground Clamp (200) 8

ITEM CODE INDEX




02011 Ground Clamp (LPG-200) 802017 Hinge Pin N/S02020 Ground Clamp (300) 802021 Ground Clamp (LPG-300) 802027 Hinge Pin N/S02030 Ground Clamp (500) 802031 Ground Clamp (LPG-500) 802037 Hinge Pin N/S02040 Ground Clamp (EG-300) 802050 Ground Clamp (EG-500) 802055 Replacement Contact Stud w/Nut (EG-500) 802056 Replacement Double Hump Jaw Stud w/Nut (EG-500) 802060 Ground Clamp (G) 1002061 Ground Clamp (G-50) 1002062 Spring Set N/S02063 Spring Set N/S02064 Oval-Point Screw N/S02065 Oval-Point Screw N/S02066 Strain Relief N/S02067 Strain Relief N/S02068 Oval-Point Screw N/S02070 Ground Clamp (MIG-600) 902071 Ground Clamp (MIG-600-50) 902075 Ground Clamp (MIG-300) 902076 Body N/S02077 Ground Clamp (MIG-300-50) 902079 Screw 1/2 - 13 902080 Rotary Ground Clamp (C) 1102081 Ground Clamp (MIG-600-D) 902082 Ground Clamp (MIG-300-D) 902083 Body N/S02085 Cable Fitting (C) 1102091 Spring Set N/S02092 Spring Set N/S02096 Clamping Screw N/S02097 Clamping Screw N/S02098 Clamping Screw N/S02099 Swivel Foot Pad N/S02101 Clamp Housing, Threaded 1202102 Clamp Housing, Counterbored 1202103 Rotor 1202104 Brushes 1202105 Brush Finger 1202106 Brush Finger Spring 1202107 Cap Screw 1202108 Mounting Bolt w/Nut [3/4 - 10 x 7½”(190mm)] 1202109 Contact Plate 1202120 Ground Clamp (GC-500) 1102121 Body Clamp and Screw (GC-500) 1102130 Ground Clamp (MIG-600-C) 1102132 Body, Pressure & Set Screw (MIG-600-C) 1102180 Ground Clamp (MG-180) 802200 Rotary Ground Clamp (R-4C) 1202220 Rotary Ground Clamp (GR-4C) 1202230 Ground Clamp (G-1500-34) 1002235 Clamping Screw N/S02240 Ground Clamp (G-1500-138) 10,1202281 Stationary Contact Plate (C) 1102282 Movable Contact Plate (C) 1102283 Mounting Center Bolt w/Nut (C) 1102284 Pressure Spring (C) 1102285 Set Screw (C) 1102286 Bearing-Thrust (C) 1102300 Magnetic Ground Clamp (MSG-500) 1102400 Magnetic Ground Clamp (MRG-500) 11

02510 Rotating Ground (LRG-240) 12025101 Rotating Ground - Special (LRG-240) 1202515 Rotating Casting (LRG-240/440/640) 1202520 Rotating Ground (LRG-440) 12025201 Rotating Ground - Special (LRG-440) 1202530 Rotating Ground (LRG-640) 12025301 Rotating Ground - Special (LRG-640) 1202561 Rotating Shaft (LRG-240) 1202562 Rotating Shaft (LRG-440) 1202563 Rotating Shaft (LRG-640) 1202570 Grease Cup (LRG-240/440/640) 1202571 Grease Button - Special (LRG-240/440/640) 1202572 Tightening Bar (LRG-240/440/640) 1202575 Tension Adj. Screw w/Washers (LRG-240/440/640) 1202577 Head Alignment Pin (LRG-240/440/640) 1202580 Mounting Nut w/Oval-point Screw (LRG-240/440/640) 1202585 Insulating Cover (LRG-240/440/640) 1202587 Oval-point Screw (LRG-240/440/640) 1202590 Conductive Lubricant 1 oz. 1202591 Conductive Lubricant 8 oz. 1202592 Conductive Lubricant 16 oz. 1202593 Conductive Lubricant 16 oz. (Cartridge) 1202595 Grease Gun w/Button Coupler 1202596 Coupler - Button 1202600 Heavy Duty Ground Clamp (RBG-1500-138) 1002610 Heavy Duty Ground Clamp (RBG-1500-34) 1002620 Heavy Duty Ground Clamp (RBG-1500-4-4/0) 1002630 Heavy Duty Ground Clamp (RBG-1500-2-2/0) 1002700 Rotating Internal Pipe Ground Clamp (PRG-48ID) 1202710 Rotating Internal Pipe Ground Clamp (PRG816ID) 1204010 Swedge-On Tool (Model 120) 2004020 Swedge-On Tool (Model 30) 2004040 Swedge-On Tool (Model 840) 2005040 Cable Connector-Black (LC-10) 1305041 Cable Connector-Red (LC-10) 1305042 Cable Connector-Yellow (LC-10) 1305043 Cable Connector Male-Black (LC-10) 130504301 Cable Connector Male Unassembled-Bulk-Black (LC-10) 1305044 Cable Connector Male-Red (LC-10) 1305045 Cable Connector Male-Yellow (LC-10) 1305046 Cable Connector Female-Black (LC-10) 130504601 Cable Connector Female Unassembled-Bulk-Black (LC-10) 1305047 Cable Connector Female-Red (LC-10) 1305048 Cable Connector Female-Yellow (LC-10) 1305050 Cable Connector-Black (LC-40) 1305051 Cable Connector-Red (LC-40) 1305052 Cable Connector-Yellow (LC-40) 1305053 Cable Connector Male-Black (LC-40) 130505301 Cable Connector Male Unassembled-Bulk-Black (LC-40) 1305054 Cable Connector Male-Red (LC-40) 1305055 Cable Connector Male-Yellow (LC-40) 1305056 Cable Connector Female-Black (LC-40) 130505601 Cable Connector Female Unassembled-Bulk-Black (LC-40) 1305057 Cable Connector Female-Red (LC-40) 1305058 Cable Connector Female-Yellow (LC-40) 1305060 Cable Connector-Black (LC-40HD) 130506004 Cable Connector-Set (LC-40HD-1/0) 130506005 Cable Connector-Set (LC-40HD-2/0) 1305061 Cable Connector-Red (LC-40HD) 1305062 Cable Connector-Yellow (LC-40HD) 1305063 Cable Connector Male-Black (LC-40HD) 130506301 Cable Connector Male Unassembled-Bulk-Black (LC-40HD) 130506304 Cable Connector-Black (LC-40HD-1/0) 1305063041 Cable Connector-Male Bulk (LC-40HD-1/0) 130506305 Cable Connector-Male (LC-40HD-2/0) 13

ITEM CODE INDEX



SECTION 300


05063051 Cable Connector-Male Bulk (LC-40HD-2/0) 1305064 Cable Connector Male-Red (LC-40HD) 1305065 Cable Connector Male-Yellow (LC-40HD) 1305066 Cable Connector Female-Black (LC-40HD) 130506601 Cable Connector Female Unassembled-Bulk-Black (LC-40HD)130506604 Cable Connector-Female (LC-40HD-1/0) 1305066041 Cable Connector-Female Bulk (LC-40HD-1/0) 130506605 Cable Connector-Female (LC-40HD-2/0) 1305066051 Cable Connector-Female Bulk (LC-40HD-2/0) 1305067 Cable Connector Female-Red (LC-40HD) 1305068 Cable Connector Female-Yellow (LC-40HD) 1305070 Cable Connector Reducer-Black (LC-1040) 1405071 Cable Connector Reducer-Red (LC-1040) 1405075 One Piece Adapter-Black (LA-1040) 1505076 One Piece Adapter-Red (LA-1040) 1505080 Machine Plug-Black (LC-10MP) 1405081 Machine Plug-Red (LC-10MP) 1405170 Cable Connector w/Glass Filled Nylon Cover (LC-40HD) 1305171 Cable Connector Male w/Glass Filled Nylon Cover (LC-40HD) 1305175 Cable Connector Female w/Glass Filled Nylon Cover (LC-40HD)1305240 Insulating Cover-Black N/S05241 Insulating Cover-Red N/S05242 Insulating Cover-Yellow N/S05243 Reducer Insulating Cover-Black N/S052431 Reducer Insulating Cover-Red N/S05245 Insulating Cover Stud Connector-Black N/S05246 Insulating Cover Stud Connector-Red N/S05251 Cover Screw N/S05252 Insulating Cover-Black N/S052521 Insulating Cover-Red N/S052522 Insulating Cover-Yellow N/S05253 Insulating Cover-Black N/S052531 Insulating Cover-Red N/S052532 Insulating Cover-Yellow N/S05254 Insulating Cover Fiber Male N/S052540 Insulating Cover Fiber Female N/S05255 Insulating Cover Stud Connector-Black N/S052551 Insulating Cover Stud Connector-Red N/S05256 Insulating Cover Stud Connector-Black N/S052561 Insulating Cover Stud Connector-Red N/S05258 Insulating Cover-Black N/S05259 Insulating Cover-Black N/S05260 Quick Detachable Female End Only (MIG-300D/600D/G-50) 905261 Quick Detachable Male End Only (MIG-300D/600D/G-50) 905263 Insulator Cup-Black (H) 1805264 Insulator Cup-Red (H) 1805265 Insulating Cover-Black N/S05266 Insulating Cover-Red N/S05270 Universal Machine Plug-Black (UP-10) 1405271 Universal Machine Plug-Red (UP-10) 1405283 Dinse Plug-Black (LDP-25M) 1605284 Dinse Plug-Red (LDP-25M) 1605289 Dinse Plug Set (LDP-25M) 1605303 Dinse Plug-Black (LDP-50M) 1605304 Dinse Plug-Red (LDP-50M) 1605309 Dinse Plug Set (LDP-50M) 1605313 Dinse Plug-Black (LDP-70M) 1605314 Dinse Plug-Red (LDP-70M) 1605319 Dinse Plug Set (LDP-70M) 1605323 Dinse Plug-Black (LDP-95M) 1605324 Dinse Plug-Red (LDP-95M) 1605329 Dinse Plug Set (LDP-95M) 1605330 Dinse Adapter-Black (LDA) 15053304 Dinse Adapter-Black (LDA-CAM) 15053305 Dinse Adapter-Black (LDA-25CAM) 15

05331 Dinse Adapter-Red (LDA) 15053314 Dinse Adapter-Red (LDA-CAM) 15053315 Dinse Adapter-Red (LDA-25CAM) 1505332 Dinse Adapter-Black (LDA-10) 1505333 Dinse Adapter-Red (LDA-10) 1505334 Dinse Adapter (Set) (LDA-10) 1505335 Dinse Adapter (Set) (LDA) 1505336 Dinse Adapter-Black (LDA-2510) 15053364 Dinse Adapter-Black (LDA-2540) 1505337 Dinse Adapter-Red (LDA-2510) 15053374 Dinse Adapter-Red (LDA-2540) 1505339 Dinse Adapter (Set) (LDA-2510) 1505340 Insulating Cover-Black N/S05341 Insulating Cover-Red N/S05342 Insulating Cover-Black N/S05343 Insulating Cover-Red N/S05345 Insulating Cover (MIG-600/MIG-600C) 9,1105350 Insulating Cover-Black N/S05351 Insulating Cover-Red N/S05360 Insulating Cover-Black N/S05361 Insulating Cover-Red N/S05370 Insulating Cover-Black N/S05371 Insulating Cover-Red N/S05375 Insulating Cover N/S05376 Insulating Cover N/S05377 Insulating Cover N/S05378 Insulating Cover N/S05379 Insulating Cover N/S05380 Oval-Point Screw N/S05385 Insulating Cover N/S05388 Insulating Cover N/S05389 Insulating Cover N/S05395 Non-Conductive Screw (1/4” - 20 x 1/2”)-Long N/S05397 Non-Conductive Screw (1/4” - 20 x 1/4”)-Short N/S05420 Dinse Connector Set-Black (LDC-25) 1505421 Dinse Connector Set-Red (LDC-25) 1505423 Dinse Connector Male Half-Black (LDC-25) 1505424 Dinse Connector Male Half-Red (LDC-25) 1505426 Dinse Connector Female Half-Black (LDC-25) 1505427 Dinse Connector Female Half-Red (LDC-25) 1505430 Dinse Connector Set-Black (LDC-50) 1505431 Dinse Connector Set-Red (LDC-50) 1505433 Dinse Connector Male Half-Black (LDC-50) 1505434 Dinse Connector Male Half-Red (LDC-50) 1505436 Dinse Connector Female Half-Black (LDC-50) 1505437 Dinse Connector Female Half-Red (LDC-50) 1505440 Dinse Connector Set-Black (LDC-70) 1505441 Dinse Connector Set-Red (LDC-70) 1505443 Dinse Connector Male Half-Black (LDC-70) 1505444 Dinse Connector Male Half-Red (LDC-70) 1505446 Dinse Connector Female Half-Black (LDC-70) 1505447 Dinse Connector Female Half-Red (LDC-70) 1505450 Dinse Connector Set-Black (LDC-95) 1505451 Dinse Connector Set-Red (LDC-95) 1505453 Dinse Connector Male Half-Black (LDC-95) 1505454 Dinse Connector Male Half-Red (LDC-95) 1505456 Dinse Connector Female Half-Black (LDC-95) 1505457 Dinse Connector Female Half-Red (LDC-95) 1505470 One Piece Adapter-Black (LDA-4050) 1505471 One Piece Adapter-Red (LDA-4050) 1505475 One Piece Adapter-Brass (LDA-513) 1505550 Cable Connector-Pink (LC-40) 1305551 Cable Connector-Blue (LC-40) 1305552 Cable Connector-Green (LC-40) 1305553 Cable Connector-Orange (LC-40) 13

ITEM CODE INDEX




05554 Cable Connector-White (LC-40) 1305555 Cable Connector Male-Pink (LC-40) 1305556 Cable Connector Male-Blue (LC-40) 1305557 Cable Connector Male-Green (LC-40) 1305558 Cable Connector Male-Orange (LC-40) 1305559 Cable Connector Male-White (LC-40) 1305560 Cable Connector Female-Pink (LC-40) 1305561 Cable Connector Female-Blue (LC-40) 1305562 Cable Connector Female-Green (LC-40) 1305563 Cable Connector Female-Orange (LC-40) 1305564 Cable Connector Female-White (LC-40) 1305570 Insulating Cover-Pink N/S05571 Insulating Cover-Blue N/S05572 Insulating Cover-Green N/S05573 Insulating Cover-Orange N/S05574 Insulating Cover-White N/S05575 Insulating Cover-Pink N/S05576 Insulating Cover-Blue N/S05577 Insulating Cover-Green N/S05578 Insulating Cover-Orange N/S05610 Dinse Tig Machine Plug (LDT-917-F) 1605612 Dinse Tig Machine Plug (LDTI-917-F) 1605615 Dinse Tig Machine Plug (LDT-24-M) 1605620 Dinse Tig Machine Plug (LDT-26-R) 1605622 Dinse Tig Machine Plug (LDTI-26-R) 1605625 Dinse Tig Machine Plug (LDT-1820-L) 1605627 Dinse Tig Machine Plug (LDTI-1820-WC) 1605650 Dinse Tig Machine Plug (LDTS-917-F) 16056501 Dinse Tig Machine Plug (LDTSI-917-F) 1605655 Dinse Tig Machine Plug (LDTS-24-M) 16056551 Dinse Tig Machine Plug (LDTSI-24-M) 1605677 Swivel Elbow 3/8” x 32 (1/4” Barb, Long Nut) N/S05678 Swivel Elbow 3/8” x 32 (1/4” Barb, Short Nut) N/S05679 Swivel Elbow 3/8” x 32 (1/8” Barb, Short Nut) N/S05680 Hose Barb with O-Ring N/S05681 Hose Barb with O-Ring 90 Degree N/S05682 Hoes Clamp N/S05740 Insulating Cover-Black N/S05741 Insulating Cover-Red N/S05750 InsulatingCover-Black N/S05751 Insulating Cover-Red N/S05760 Insulating Cover-Black N/S05761 Insulating Cover-Red N/S05770 Insulating Cover-Black N/S05771 Insulating Cover-Red N/S05800 Cable Connector-Pink (LC-40HD) 1305801 Cable Connector-Blue (LC-40HD) 1305802 Cable Connector-Green (LC-40HD) 1305803 Cable Connector-Orange (LC-40HD) 1305810 Cable Connector Male-Pink (LC-40HD) 1305811 Cable Connector Male-Blue (LC-40HD) 1305812 Cable Connector Male-Green (LC-40HD) 1305813 Cable Connector Male-Orange (LC-40HD) 1305820 Cable Connector Female-Pink (LC-40HD) 1305821 Cable Connector Female-Blue (LC-40HD) 1305822 Cable Connector Female-Green (LC-40HD) 1305823 Cable Connector Female-Orange (LC-40HD) 1305900 T Connector-Black (LTC-40) 1305901 T Connector-Red (LTC-40) 1305920 LC-CAM-1 Black Male 1405921 LC-CAM-1 Red Male 1405925 LC-CAM-1 Black Female 1405926 LC-CAM-1 Red Female 1405930 LC-CAM-2 Black Male 1405931 LC-CAM-2 Red Male 14

05935 LC-CAM-2 Black Female 1405936 LC-CAM-2 Red Female 1405940 LC-CAM-4 Black Male 1405941 LC-CAM-4 Red Male 1405945 LC-CAM-4 Black Female 1405946 LC-CAM-4 Red Female 1406010 Cable Splicer (CS-610) 2006012 Insulating Cover N/S06020 Cable Splicer (CS-2040) 2006022 Insulating Cover` N/S06030 Cable Splicer (CS-3040) 2006032 Insulating Cover N/S06110 Cable Splicer (S-12) 2006120 Cable Splicer (S-1020) 2006130 Cable Splicer (S-3040) 2006140 Heat Shrink (Splicers) 2006980 Power Cable Lugs (L-8) 1906985 Power Cable Lugs (L-6) 1906990 Power Cable Lugs (L-4) 1906995 Power Cable Lugs (L-2) 1907000 Welding Cable Lugs (L-1/L-25 1907005 Welding Cable Lugs (L-26) 1907010 Welding Cable Lugs (L-12) 1907020 Welding Cable Lugs (L-1020) 1907030 Welding Cable Lugs (L-3040) 1907040 Mechanical Cable Lugs (LM-610A) 1907050 Mechanical Cable Lugs (LM-610S) 1907060 Mechanical Cable Lugs (LM-2040A) 1907070 Mechanical Cable Lugs (LM-2040S) 1907080 Mechanical Cable Lugs (LM-610A) 1907090 Mechanical Cable Lugs (LM-610SI) 1907100 Mechanical Cable Lugs (LM-2040AI) 1907110 Mechanical Cable Lugs (LM-2040SI) 1907120 Mechanical Cable Lugs (LM-2040S-HD) 1907130 Mechanical Cable Lugs (LM-240SI-HD) 1907140 Mechanical Cable Lugs (LM-2040S-HD-34) 1907150 Mechanical Cable Lugs (LM-2040SI-HD-34 1908010 Connector Terminal (CT-10FA) 1808020 Connector Terminal (CT-10FS) 1808030 Connector Terminal (CT-40FA) 1808040 Connector Terminal (CT-40FS) 1808050 Stud Connector-Black (LSC-10) 1808051 Stud Connector-Red (LSC-10) 1808060 Stud Connector-Black (LSC-40) 1808061 Stud Connector-Red (LSC-40) 1808070 Stud Connector-Black (LSC-40-H) 1808071 Stud Connector-Red (LSC-40- H) 1808080 Stud Connector-Black (LSC-3040) 1808081 Stud Connector-Black (LSC-3040) 1808090 Stud Connector-Black (LSC-3040-H) 1808091 Stud Connector-Red (LSC-3040-H) 1808100 Power Output Terminal – Black (TPO) 1808101 Power Output Terminal – Red (TPO) 1808104 Dinse Panel Receptacle Female (LCPM-40) 1508105 Dinse Panel Receptacle Female (LDPM-25) 1508106 Dinse Panel Receptacle Female (LDPM-50) 1508108 Dinse Panel Receptacle Male (LDPM-50-M) 1508110 Dinse Connector Terminal-Angle (LDCT-50FA) 1808120 Dinse Connector Terminal-Straight (LDCT-50FS) 1808150 Dinse Stud Connector Male-Black (LDSC-50) 1808151 Dinse Stud Connector Male-Red (LDSC-50) 1808155 Dinse Stud Connector Male-Black (LDSC-50-H) 1808156 Dinse Stud Connector Male-Red (LDSC-50-H) 1808210 Stud Assembly (LSA) 1808211 Stud Assembly (LSA-1) 18

ITEM CODE INDEX



SECTION 300

Documents

LENCO WELDING ACCESSORIES LTD. SECTION 300 ...Quick Reference PAGE(S) 2-7 11-12 8-10 19 13-17 18 20 ELECTRODE HOLDERS ROTARY GROUND CLAMPS GROUND CLAMPS CABLE LUGS STUD AND TERMINAL