Lenovo Pocket Projector P0510 Quick Start Guide

1 

 

Table of Contents

2 Shipping Contents

2 Specifications

3 Product Introduction

4 Getting Started

4 Turning On

4 A. Using with an Android Phone or Tablet

4 A1 Screen-mirroring based on Miracast Protocol*

5 A2 Project Online Video More Freely

7 B. Using with iPhone/Mac Devices

8 C. Using with Windows 8.1+ Devices

9 D. Using a Micro SD Card to Play Videos and Pictures

9 E. Setup Options

10 Other Operations

11 FAQs

11 Safety Instructions

2 

 

Shipping Contents

P0510 Charger USB cable User Manual/Warranty Card P0510 protective sleeve

Notices: You may need to charge your P0510 before switching it on for the first time. We recommend using the in-

box charger for P0510. In order to ensure adequate power for the P0510 to work, please use the standard 5.2V 2A charger to

charge it. Using other types of chargers may cause problems with the P0510 when it is turned on. In this case, press

the Power reset button (2 in the product diagram) before turning on.

Specifications

Product dimensions: 120x110x29.5 mm WLAN protocol: IEEE 802.11 a/b/g/n 2.4GHz/5GHz dual-band WiFi Optical engine rotation angle: 0 ~ 90° Weight: 288g Operating temperature: -10 ~ 35 °C Effective projecting distance: 0.2 ~ 5 m Image display size: 37” @ 1m, 75” @ 2m, 111” @ 3m Maximum brightness of optical engine: 50 lumens Optical engine physical display resolution: 854x480

Aspect ratio: 16 : 9 Power input: 5.2V 2A Built-in battery capacity: 5200mAh Battery life: up to 180 mins Supported systems: Android 4.3 or later; iOS 7.0 or later; Windows 8.1 or later Supported wireless screen mirroring protocols: Miracast, DLNA Micro SD card: up to 32GB

3 

 

8. Up/Down (direction/volume) 9. Home screen button 10. Left/Right (direction/rewind/fast forward) 11. OK/Pause 12. Projection Lens 13. Vent

Light Status Indicator

Turned on with enough power: Solid green Low power: Flashing red Charging: Solid red Charging complete: Solid green

1. Focus ring 2. Power reset button 3. Micro USB charging port 4. 3.5mm Audio jack 5. Power On/Off button 6. Speaker 7. Micro SD card slot

Product Introduction

4 

 

Getting Started

With the P0510, you can project audio and video content on any of your mobile smart devices to enjoy and share with others anytime, anywhere.

The P0510 is compatible with most mobile smart devices, including Android and Apple operating systems for mobile phones, tablets, PCs (Win8.1+) and Mac.

Turning On 1. Please use the in-box charger and the cable to ensure the P0510 has sufficient power supply at the first

time usage. 2. Long Press the Power On/Off button (5). The Lenovo logo will appear. After 6 seconds, the P0510 standby

screen will appear. 3. Rotate the Focus Ring (1) to adjust sharpness. 4. While turned on, press and hold the Power On/Off button (5) for three seconds and the P0510 will turn off.

A. Using with an Android Phone or Tablet A1. Screen-mirroring based on Miracast Protocol*

1. Select the icon in the standby screen, and press the OK button to confirm. 2. Open your phone or tablet’s WLAN options. 3. Go to Settings Display Select “Cast screen” or “Wireless display” or similar option Open the top

right corner to turn on wireless display Click Lenovo-P0510-xxxxxx to connect your Android device with the P0510.

4. You can now share video, pictures or even Office documents on your phone or tablet via the P0510 projector.

* This feature requires your Android device to support Miracast. Actual results will depend on the performance of your Android device. If you are not sure whether your device supports Miracast and how to operate wireless screen mirroring, please consult your Android device manufacturer.

If your Android phone or tablet does not support Miracast, you can still watch online videos through the P0510 following the method described in A2 below.

5 

 

A2. Project Online Video More Freely After connecting the P0510 to the Internet, you can use a third-party video app which supports DLNA or AirPlay to play online videos through P0510.

A2.1 Connecting the P0510 to WiFi

1. In the Standby screen, select , and press the OK button to confirm.

2. Open your phone or tablet’s WLAN options, search for and connect the Lenovo-P0510-xxxxxx WiFi hotspot.

3. Open a browser on your phone or tablet and type http://192.168.49.1 to access the P0510 settings page.

4. Click and follow the prompts to scan the WiFi hotspot you want the P0510 to connect to. Then enter the password and connect.

5. It will take about five seconds to connect, then the name of your WiFi hotspot will appear at the top right corner of the standby screen.

Please ensure your P0510 and smart device are connected to the same WiFi hotspot.

If it is not the first time for you to connect to the router, then in the “connect the P0510 to WiFi”

/“Video Cast” /“iOS_Mac” mode, the P0510 will automatically connect to the available known WiFi hotspot within 30 seconds.

Notices: If you need to connect the P0510 to a new WiFi hotspot, after entering the Connect to WiFi module, the

P0510 takes about 30 seconds to search and then automatically connect to a hotspot it has connected before. Afterwards, the P0510’s WiFi hotspots will be reopened to connect to your smart devices.

If your WiFi hotspot is set to hide, the P0510 will be unable to find your WiFi hotspot. Please ensure your router’s WiFi hotspot is set to visible.

After the P0510 is connected to your WiFi hotspot, we strongly recommend that you refer to the “Other Operations” section on setting up a password for the P0510. Otherwise, other devices will be able to share your WiFi hotspot via the P0510 without your authorization.

If you need to delete a hotspot that the P0510 has previously connected to or reset the password for the P0510, follow the instructions given in the “Other Operations” section on restoring factory settings.

6 

 

A2.2 Using Third-Party Video Apps to Project Online Videos

Make sure your smart device and the P0510 are on the same WiFi hotspot. 1. After your WiFi hotspot appears in the top right corner of the standby screen in “connect the P0510 to WiFi”

/“Video Cast” /“iOS_Mac” mode, you can use DLNA screen mirroring to play videos through a third-party video app.

2. Open the third-party video app with a smart device that supports DLNA. 3. Find a movie you want to watch (wait for the ads to finish) show on full screen Click the currently

playing screen Pop up the player control interface Find the icon or display icon Click this icon Pop up your Lenovo-P0510-xxxxxx device name Click this device name. Wait a moment. Online videos will be pushed to the P0510 and projected. Actual projection results will depend on the third-party video app.

Notices: If an authenticated WiFi hotspot is required, you can connect to the WiFi hotspot with the P0510, and then

connect your phone or tablet to the P0510’s WiFi hotspot. Afterwards, once you have logged in to the authentication page with your phone or tablet, you can project videos via the P0510 in third-party video apps that support screen mirroring.

The P0510 may be unable to connect some WiFi hotspots that use special encryption. If you encounter problems, please consult your network provider.

7 

 

B. Using with iPhone/Mac Devices

Screen mirroring can be done on Apple devices with iOS7, OS X Yosemite v10.10 or Macs with higher versions (2012 or later models)

1. Select the Apple device icon in the P0510 standby screen, and press the OK button to confirm. 2. Open your Apple device’s WLAN options, search for and connect the Lenovo-P0510-xxxxxx WiFi hotspot. 3. Open the video or picture file on your device that you want to project. 4. For iOS, please plan to bring the main screen control panel up from the bottom, click the monitor icon,

find the Lenovo-P0510 device name, and click Finish. You can now project and share your file. 5. On a Mac, click the desktop display icon in the top status bar, and find the Lenovo-P0510 device name.

You can now sync and display your Mac computer’s screen information. 6. You can also use Apple devices to watch online videos. If you have already connected the P0510 to WiFi

following the steps outlined in section A2.1, you can also project videos from third-party video apps according to the steps in Section A2.2.

In order to project homemade videos from your device more smoothly, we recommend that you connect the P0510 to a 5GHz WiFi hotspot, and then connect to the hotspot directly using an Apple device. If your router supports the 5GHz band, the name will usually contain “_5G”. Please search for and connect to the WiFi hotspot with this band via the P0510. Please refer to the specific steps for connecting in section A2.1, then select the name of your 5GHz WiFi hotspot and connect.

8 

 

C. Using with Devices Running Windows 8.1 or Later*

1. Select the icon in the standby screen, and press the OK button to confirm. 2. Open WLAN options on the Windows device. 3. Swipe from right to left on the Windows 8.1 screen Pop up the control bar Click on “Devices”

Select “Projection devices” Click on the “Add a wireless display devices” Click “Add a device” as shown on the right Select Lenovo-P0510-xxxxxx Wait a moment The screen contents of your Windows 8.1 device will be projected.

* Your Windows device must support Miracast if you want to use the screen mirroring function. Actual results will depend on the performance of your Windows device. If you are unsure whether your device supports Miracast, you can download a script from the address below to help you determine: http://support.lenovo.com/us/en/documents/P0510 If your Lenovo computer supports Miracast but you are experiencing problems connecting, please visit the address below to upgrade the device drivers for your graphics and network cards: http://support.lenovo.com/hk/en/?menu-id=lenovo_and_think_support If you are still experiencing connection problems, please contact your device manufacturer for further assistance.

9 

 

D. Using a Micro SD Card to Play Video and Pictures

The P0510 support pictures and video playback from an external Micro SD card. Specific steps: 1. Copy the pictures and videos you want to view onto the Micro SD card 2. Place the Micro SD card in the Micro SD card slot (7) 3. Image formats supported: PNG/JPG 4. Video formats supported: MP4/AVI/TS/MPEG/MOV/FLV/3GP/MPG/VOB/MTK/MKV. E. Setup Options

Select the icon in the standby screen, and press the OK button to enter the P0510 setup options. 1. Language settings. In language settings, you can choose your preferred UI language. After a new language

is selected, the P0510 will automatically reboot. 2. Keystone correction. The automatic keystone correction of the P0510 is enabled by default. If you want to

carry out manual keystone correction, you should choose Settings K Stone Calibration Manual, then follow the screen prompts and press the arrow keys to adjust the picture shape.

3. Energy-saving mode. After turning on energy-saving mode, when the power level is low, the P0510 will work at low brightness (30 lumens) to extend battery life. If you turn off energy-saving mode, the P0510 will work always at high luminance of 50 lumens. Energy-saving mode is turned off in the P0510 by default.

4. About the device. Click on About the Device to show the P0510’s firmware version information.

10 

 

Other Operations

Set Password 1. Follow the steps outlined in section A2.1 to enter the P0510 settings page,

and click to set password. 2. Once the password has been changed successfully, the P0510 will

automatically restart.

Notices After you connect the P0510 to an available WiFi hotspot, smart devices connected to the P0510 can connect to the Internet indirectly. If it is not password protected, other people will be able to connect their devices to your WiFi hotspot via the P0510 without your authorization. It is strongly recommended that you set a password for the P0510.

Upgrading Firmware

1. Follow the steps outlined in section A2.1 to enter the P0510 settings page, and click to upgrade firmware.

2. The upgrade process depends on your network environment. It will take at least five minutes, and the P0510 will automatically reboot.

Notices Throughout the P0510 firmware upgrade progress, please ensure that the projector is on charging status or has no less than 40% power to support the upgrade.

Factory reset

Press and hold the Home button (9) on top of the P0510 for 3 seconds, until the restore factory settings prompt appears on screen. The password and previously connected WiFi hotspot information on the P0510 will all be reset and the device will return to factory settings. P0510 default password is blank.

11 

 

Q: My smart device can’t find the P0510 in the DLNA supported 3rd party video App. A: Please ensure that your P0510 and smart phone or tablet are connected to the same WiFi hotspot. Q: When streaming video from an Apple device, the projector experiences pauses and buffering. A: Smooth playback requires sufficient WiFi bandwidth. We recommend that you use a 5GHz hotspot and devices which support the 5GHz standard. Q: My smart device cannot find the P0510 when connecting via 5GHz WiFi. A: Once connected to a 5GHz WiFi hotspot, the P0510 will default to 5GHz and can only be seen by devices which support 5GHz. If your device does not support 5GHz, you may follow the instructions for restoring the P0510 to factory settings which will enable to connect to devices supporting 2.4GHz WiFi.

FAQs

If you have any other questions, please visit http://support.lenovo.com/us/en/documents/P0510 for more information.

Safety instructions

Don’t let children look directly at a light source through the lens. The P0510 contains optical components. Please do not drop or knock the product. Avoid using in wet or humid conditions. Do not attempt to disassemble for repair.

12 

 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, detectable by turning the equipment in question off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna • Increase the distance between the equipment and the receiver • Connect the equipment to an outlet on a different circuit than that which the receiver is connected to • Or consult the dealer or an experienced radio/TV technician for help.

This device is complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

IC:

This device complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Environmental, recycling, and disposal information

General recycling statement

Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to: http://www.lenovo.com/recycling.

13 

 

Important WEEE information

Electrical and electronic equipment marked with the symbol of a crossed-out wheeled bin may not be disposed as unsorted municipal waste. Waste of electrical and electronic equipment (WEEE) shall be treated separately using the collection framework available to customers for the return, recycling, and treatment of WEEE. Country-specific information is available at: http://www.lenovo.com/recycling

Recycling information for India

Recycling and disposal information for India is available at: http://www.lenovo.com/social_responsibility/us/en/sustainability/ptb_india.html

Battery recycling information for the European Union

Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per this Directive.

In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and treatment of batteries and accumulators. Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances. For proper collection and treatment, go to: http://www.lenovo.com/recycling.

14 

 

Restriction of Hazardous Substances Directive (RoHS)

European Union

Lenovo products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”).

For more information about Lenovo progress on RoHS, go to:

http://www.lenovo.com/social_responsibility/us/en/RoHS_Communication.pdf

India

RoHS compliant as per E-Waste (Management & Handling) Rules, 2011.

Vietnam

Lenovo products sold in Vietnam, on or after September 23, 2011, meet the requirements of the Vietnam Circular 30/2011/TT-BCT (“Vietnam RoHS”).

Ukraine

Цим підтверджуємо, що продукція Леново відповідає вимогам нормативних актів України, які обмежують вміст небезпечних речовин

Turkish

The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Waste Electrical and Electronic Equipment (WEEE).

Türkiye AEEE Yönetmeliğine Uygunluk Beyanı

Bu Lenovo ürünü, T.C. Çevre ve Orman Bakanlığı’nın “Atık Elektrikli ve Elektronik Eşya Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Yönetmelik (AEEE)” direktiflerine uygundur.

AEEE Yönetmeliğine Uygundur.