Upload
lequynh
View
220
Download
3
Embed Size (px)
Citation preview
Lever Hand ControlWM-535IP67 sealedEMI resistant (SAE J1113)
Williams Controls’ Lever Hand Control is designed for demanding off-road applications. It is infinitely variable between 0 and 54 degrees with applicable uses that include engine RPM, chassis module inputs and hydrau-lic pump control. The Lever Hand Control is environmen-tally protected allowing it to be mounted inside or outside the cab.
The Lever Hand Control unit is equipped with a Hall Effect non-contact sensor that can be programmed for analog output and/or integrated switches. The electron-ics are IP67 sealed and highly EMI resistant (SAE J1113). In addition, the unit can be customized with contact or Hall Effect PWM sensors.
The Lever Hand Control has a molded Nylon 66 body, and features a powder-coated customizable steel lever arm with vinyl knob.
Full Travel Cycles:
Seal Integrity:
EMI:
Dual Ratiometric Sensor Output:
Degrees:
Operating Torque:
Max Torque:
Vibration:
Operating Temp Range:
Storage Temp Range:
Humidity:
Sand/Dust:
Main Body:
Knob/Lever:
Sensor Housing:
800,000
Electronics IP67 sealed (IEC 60529)
SAE J1113 Compliant
5V Analog Operation
54
5.3 Nm
60 Nm
8 hour, 3 axis, random broadband up to 11g
-40 C to +85 C
-40 C to +125 C
95% RH, for 120 hours
Tested to SAE J1455
Nylon 66
Vinyl/Corrosion Resistant Plated Steel
PBT Polyester
PRODUCT LIFE
ELECTRONICS
ELECTRICAL
TRAVEL ANGLE
MECHANICAL
ENVIRONMENTAL
MATERIALS
ElectronicThrottle Controls
Adjustable PedalSystems
Hand Controls
Sensors
C
M
Y
CM
MY
CY
CMY
K
Lever Hand ControlWM-535IP67 sealedEMI resistant (SAE J1113)
Williams Controls’ Lever Hand Control is designed for demanding off-road applications. It is infinitely variable between 0 and 54 degrees with applicable uses that include engine RPM, chassis module inputs and hydrau-lic pump control. The Lever Hand Control is environmen-tally protected allowing it to be mounted inside or outside the cab.
The Lever Hand Control unit is equipped with a Hall Effect non-contact sensor that can be programmed for analog output and/or integrated switches. The electron-ics are IP67 sealed and highly EMI resistant (SAE J1113). In addition, the unit can be customized with contact or Hall Effect PWM sensors.
The Lever Hand Control has a molded Nylon 66 body, and features a powder-coated customizable steel lever arm with vinyl knob.
Full Travel Cycles:
Seal Integrity:
EMI:
Dual Ratiometric Sensor Output:
Degrees:
Operating Torque:
Max Torque:
Vibration:
Operating Temp Range:
Storage Temp Range:
Humidity:
Sand/Dust:
Main Body:
Knob/Lever:
Sensor Housing:
800,000
Electronics IP67 sealed (IEC 60529)
SAE J1113 Compliant
5V Analog Operation
54
5.3 Nm
60 Nm
8 hour, 3 axis, random broadband up to 11g
-40 C to +85 C
-40 C to +125 C
95% RH, for 120 hours
Tested to SAE J1455
Nylon 66
Vinyl/Corrosion Resistant Plated Steel
PBT Polyester
PRODUCT LIFE
ELECTRONICS
ELECTRICAL
TRAVEL ANGLE
MECHANICAL
ENVIRONMENTAL
MATERIALS
ElectronicThrottle Controls
Adjustable PedalSystems
Hand Controls
Sensors
C
M
Y
CM
MY
CY
CMY
K
TYPICAL OUTPUT CHARACTERISTICS (other outputs are available)
MECHANICAL DIMENSIONS (mm)
14100 SW 72nd AvenuePortland, OR 97224 USA
Phone +1-503-684-8600Fax +1-503-684-8610
www.wmco.com
WM-535IP67 sealed
EMI resistant (SAE J1113)
AP
S O
UTP
UT
%V
cc
ANGULAR POSITION
APS 2OUTPUT
APS 1OUTPUT
(84%)
(42%)
(22%)
(11%)
(0.0 )CLOSED THROTTLE
(54 )FULL THROTTLE
C
M
Y
K
Doc. # 401229 Rev. A 3/11
TYPICAL OUTPUT CHARACTERISTICS (other outputs are available)
MECHANICAL DIMENSIONS (mm)
14100 SW 72nd AvenuePortland, OR 97224 USA
Phone +1-503-684-8600Fax +1-503-684-8610
www.wmco.com
WM-535IP67 sealed
EMI resistant (SAE J1113)
AP
S O
UTP
UT
%V
ccANGULAR POSITION
APS 2OUTPUT
APS 1OUTPUT
(84%)
(42%)
(22%)
(11%)
(0.0 )CLOSED THROTTLE
(54 )FULL THROTTLE
C
M
Y
K
Doc. # 401229 Rev. A 3/11