Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
LG’s manufacturing process & testing excellence
LG solar panels are built to a very high quality standard
They are tested rigorously during design and production
All input materials for panels – from aluminum, to glass
& silicon – undergo regular quality control processes
LG expects its panels to be identical so the allowable
variances are minimal
In Australia, from 300,000 panels installed between
2011 & August 2016, only 2 panels have been returned.
Worldwide, the return rate is less than 10 in 1 million
LG's quality control systems
ore than 500
quality control
processes and
tests applied to
every module
L G L G QQ--System System
&
Ongoing input
material testing
2 x 100%
EL Test
Reliability sampling
test every month
Each module's data
stored for 30yrs in
LG system for 100%
traceability
LG modules pass key longevity tests
for Ammonia
Resistance Test
for VDE
registration
for Salt Mist
Corrosion Test
Long term performance security
for PID
TestResistance Test
LG Quality Control - PID* Test
“384“
* Potential Induced Degradation is a
power degradation from exposure to
High Voltage Stress.
At the internal PID test, LG tests 4x
the IEC standard.
Power
(%)
Power
(%)
LG Mono XLG Mono X Competitor A*Competitor A*
96 hrs96 hrs 384 hrs384 hrs
100%100%99.4%99.4%92.4%92.4%
90.3%90.3%
97.8%97.8%
1x IEC 1x IEC 4x IEC4x IEC
95%*95%*
Power
(%)
LG Mono X Competitor A*
96 hrs 384 hrs
100%99.4%92.4%
90.3%
97.8%
1x IEC 4x IEC
95%*
•Quality
European
Brand
Panel
IEC Pass
LG Quality Control - Damp Heat Test
* Criteria of 1x IEC standard for pass
Power
(%)
Power
(%)
1000 hrs1000 hrs 4000 hrs4000 hrs
100%100% 99.9%99.9%96.5 %96.5 %
1x IEC 1x IEC 4x IEC4x IEC
95%*95%*
Power
(%)
1000 hrs 4000 hrs
100% 99.9%96.5 %
1x IEC 4x IEC
95%*
The Damp / Heat test is designed to
evaluate a module’s performance under
high temperatures and high humidity.
LG’s Damp Heat Test consists of
4 x IEC standard being 4000 hours.
IEC Pass
LGLG
LG Quality Control - Thermal Cycle Test
Power
(%)
Power
(%)
200 Cycle200 Cycle 800 Cycle800 Cycle
100%100% 99.4%99.4% 98.6%98.6%
1x IEC 1x IEC 4x IEC4x IEC
95%*95%*
Power
(%)
200 Cycle 800 Cycle
100% 99.4% 98.6%
1x IEC 4x IEC
95%*
Many manufacturers test their panels to pass
IEC standards
LG tests its panels 4x the IEC standard
to ensure maximum longevity
At the Thermal Cycling Test LG also tests to
higher temperatures than IEC standards
IEC Pass
* Criteria of 1x IEC standard for pass
LGLG
LG Quality Control - Sequential Test
LG undertakes an extreme
sequential Damp/Heat,
Thermal/Cycle & Humidity/Freeze
Test for its modules. This replicates
extreme and prolonged weather
conditions.
100%100%95.3%95.3%
87.3%87.3%
LG Mono X2LG Mono X2 Competitor A*Competitor A*
D/H 2000hrs
D/H 2000hrs
T/C400 cycles
T/C400 cycles
H/F 40 Cycles
H/F 40 Cycles++ ++
100%95.3%
87.3%
LG Mono X2 Competitor A*
D/H 2000hrs
T/C400 cycles
H/F 40 Cycles+ +
• Quality
European
Brand Panel
Summary of key tests
Temperature
& Damp test
for extreme
weather cond.
Load Test 1 Dynamic Mechanical Load
Maximum
Power Test
Impact Fracture
Test
Wafer Impurity
Test
Wafer Resistance
Test
Field Test
Hail Impact Test
Mechanical Load
Salt Spray Test
UV Test Micro Crack (EL)
Test
Backing Sheet
Stress Test
Load Test 2 Static MechanicalLoad
Ammonia
Resistance Test
Humidity
Freeze Test
Low Hot Spot Risk due to two EL Tests
To find module defects during the production process, LG conducts
EL ( Electroluminescence ) tests, prior and post lamination
Soldering Check Micro Crack Check
Image
Details
Missing soldering spots between
the ribbon and cell surface may
cause hot spots
Micro-cracks in the cell can make the
current mismatch, altering front Ag
paste colour and material characteristics
Reference sites
Thank you for your timeThank you for your time
LG Solar Markus Lambert - 0449 552190
Grant Rollo - 0419 266419
https://lgenergy.com.au/