Upload
bodeadumitru9261
View
223
Download
0
Embed Size (px)
Citation preview
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 1/24
Your simple guide to
preparing and finishing wood,
stone and laminate flooring
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 2/24
You can bring out the natural lustre and beauty of your
wood, laminate and stone flooring and ensure a hard-wearing
finish year after year by using Liberon’s extensive range of
floor treatments. We’re the choice of professionals and are
happy to offer advice on using the right Liberon product to
achieve the finish you want.
In these pages you’ll find the appropriate treatment foryour floor, as well as simple steps and useful tips to give
you the confidence to use Liberon products to create
stunning results.
Quality, reliability and safety
Premium performance is fundamental to Liberon’s values
and the brand is synonymous with high quality. This
continues today with many of our products being BS EN71
Part 3 Approved – Safe for toys, and/or endorsed by the
Guild of Master Craftsmen.
Manufacturer of quality floor finishes
BS EN71Part 3 – Safe for toys
Guild of Master Craftsmen
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 3/24
Wood flooring – Preparation
L I B E R O N F L O O R C L E A N E R 3
Floor Cleaner
PurposeCleans and removes built-up waxes, dirt and grime
from wooden and stone flooring without stripping off
varnishes. Ready and easy to use it will not change the
natural colour of the wood.
ApplicationSoak a pad of Liberon Steel Wool (grade 0000 or 00) with
Floor Cleaner and gently scrub the surface. Allow a few
minutes for the Floor Cleaner to work then while the
surface is still wet use a clean dry cotton cloth to wipe
off all the old wax.
More than one application may be required on heavily
waxed surfaces. Allow the surface to dry out completely
before re-finishing.
Sizes: 1 L • 5 L
LibtipDispose of used steel
wool and cloths outside
to reduce vapour build-
up and fire hazard.
T H I S H I G H L Y E F F E C T I V E
C L E A N E R P R E P A R E S O L D A N D
E X I S T I N G W O O D E N A N D
S T O N E F L O O R I N G F O R N E W
T R E AT M E N T A N D F I N I S H I N G .
Coverage Application
Drying time Cleaning tool
Brush orsteel wool
White spirit
1 L
6-8 m2
Min2 hours
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 4/24
4 L I B E R O N W O O D F L O O R D Y E
Purpose Water based dye for colouring bare wooden flooring
before varnishing, oiling or waxing. Suitable for use on
hard and soft woods it can also be mixed with Liberon
Natural Finish Floor Varnish and Hardwearing Floor Gel
to create a tinted varnish.
ApplicationShake well before use. Apply reasonably quickly along
the grain with a foam applicator or brush. Wipe off
excess with a clean dry cotton cloth before it dries to
even out the colour. Avoid overlap marks on large
surfaces by working a small section at a time. A second
coat may be applied after 2 hours if a stronger colour
is required.
Care must be taken when using a water based varnishover Liberon Wood Floor Dye. Keep brush strokes to a
minimum as over brushing may lift out the colour.
Size: 250 ml
LibtipIf more than one tin is
required to complete thework, mix the tins of
dye together to ensure
a uniform colour.
Coverage Application Drying time Cleaning tool
Foamapplicatoror brush Water
250 ml
2-4 m2
Min8 hours
Antique Pine
Medium Oak
Dark Oak
VictorianMahogany
Colours
P R O F E S S I O N A L Q U A L I T Y
D Y E T H AT B R I N G S O U T T H E
G R A I N A N D E N H A N C E S I T S
N AT U R A L A P P E A R A N C E .
Wood Floor Dye
Wood flooring – Preparation
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 5/24
Wood Filler
PurposeTo fill deep scratches, drill holes and other damage with
minimal shrinkage, good flexibility and crack-resistance.
Low odour and quick drying it can be sanded, screwed
and nailed as well as stained, varnished, waxed or
painted. Ideal for filling small holes and imperfections
in floor boards.
ApplicationSelect the colour which is closest to that of the wood,
or a shade darker, and apply using a suitable filling knife.
Resist overspreading, but leave sufficient overfill to
enable thorough sanding. Allow to dry thoroughly – two
hours or more depending upon the depth of the repair.
Sand, colour and finish as required.
Size: 125 ml
LibtipSmall holes may
be filled in one
operation. For best
results we recommend
building up layers
in deeper holes.
L I B E R O N W O O D F I L L E R 5
M U L T I - P U R P O S E , W AT E R - B A S E D
F I L L E R I D E A L F O R R E P A I R I N G
S U R F AC E D A M A G E T O W O O D .
Wood flooring – Repair and prepare
Coverage Application
Drying time Cleaning tool
Painters knife
Asrequired
Water
Usage
Interiorand
exterior
Min2 hoursdependingupon depth
Antique Pine
Dark Oak
Mahogany
Neutral
Colours
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 6/24
6 L I B E R O N T W O P A R T W O O D F I L L E R
PurposeReconstitutes missing sections of wood in floors during
refurbishment. A fast curing and shrink resistant filler
it can be sanded, nailed and dyed once hardened.
Compatible with most finishing products it is ideal for
use prior to painting.
ApplicationEnsure the surface is clean, dry and free from dust.
Mix a pea size amount of hardener with a soup spoonful
of wood filler in the plastic lid. Immediately place the
filler onto the area requiring filling using a suitable filling
knife. You have a working time of 5-10 minutes and the
filler can be sanded once hardened (approximately
30 minutes).
Note: Two Part Wood Filler will accept dyes/stains
differently to surrounding wood.
Size: 200 g
Two Part Wood Filler
Wood flooring – Repair and prepare
H A R D W E A R I N G , E P O X Y
S T R E N G T H W O O D
S U B S T I T U T E M A D E
F R O M W O O D F L O U R
A N D P O LY E S T E R R E S I N .
Coverage Application
Drying time Cleaning tool
White spirit
Usage
5-10 minsdependingupon depth
Interiorand
exterior
Asrequired
Painters knife
Libtip
Always work withsmall quantities as
the product hardens
very quickly.
Neutral
Colour
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 7/24
Purpose Water, heat and alcohol resistant Liberon Floor Sealer
is highly effective as a final satin finish, or excellent
preparation prior to waxing with Liberon Floor Wax or
varnishing with Liberon High Resistance Floor Varnish.
It enhances the natural colour of new and old wood
and helps protect against stains and scratching. Also
suitable for sealing unvarnished cork surfaces.
ApplicationSand the floor if required and remove all previous
finishes. Apply a reasonable coat of Floor Sealer with a
brush, roller or cloth. Allow the oil to penetrate for 5-10
minutes then remove the excess with a dry lint-free cloth.
We recommend a minimum of 3 coats. Additional coats
may be required on porous surfaces or where greater
durability is required. The more coats applied the higher
the sheen. Allow 24 hours before applying a waxor varnish.
Sizes: 1 L • 5 L • 25 L
L I B E R O N F L O O R S E A L E R 7
Floor Sealer
Wood flooring – Traditional finishes
A N AT U R A L , O I L B A S E D S E A L E R
A N D / O R F I N I S H F O R W O O D A N D
P A R Q U E T F L O O R S . G I V E S A S O F T
S AT I N T O G L O S S S H E E N .
LibtipOil finishes bring out
the natural colours of
timber. A wet surface
will be an indication
of the final colour.
Coverage Application
Drying time Cleaning tool
Brushor cloth
White spirit
1 L
8-10 m2
Min5 hours
Kitchens and
bathrooms
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 8/24
8 L I B E R O N F L O O R W A X
PurposeNourishes and beautifies wooden flooring to protect
against daily wear and tear. A quick drying, non-sticky
product it buffs easily to a soft and natural sheen. Forbest results and to further enhance the grain use over
Liberon Floor Sealer.
ApplicationSand the floor if required and remove all previous
finishes. Apply Floor Wax in thin coats using a brush
or cloth, rubbing to ensure the wax penetrates into the
heart of the wood. Allow at least 30 minutes to become
touch dry then buff to a shine. Apply further coats until
the desired level of sheen is achieved.
Sizes: 1 L • 5 L
Floor Wax
Wood flooring – Traditional finishes
Libtip Waxed surfaces can
be slippery so avoid
using in rooms where
surface water is
possible i.e. kitchens
and bathrooms.
A W O N D E R F U L LY T R A D I T I O N A L A N D
C L A S S I C F I N I S H F O R B O T H N E W
A N D R E C L A I M E D W O O D E N F LO O R I N G
A N D C O R K L I N I N G S . I D E A L F O R U S E
I N D I N I N G R O O M S A N D B E D R O O M S .
Coverage Application
Drying time Cleaning tool
Brushor cloth
White spirit
Hard wearing
1 L
12-15 m2
Min30 mins
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 9/24
PurposeDesigned for use on all types of untreated real wood
floors Liberon Floor Oil provides a water, heat and
alcohol resistant finish that enhances the natural colour
and grain of the timber. Due to excellent water resistant
properties it is ideal for use in kitchens and bathrooms.
ApplicationSand the floor if required and remove all previous
finishes. Apply with a brush, cloth or roller working with
the grain of the wood wherever possible. Allow the oil to
penetrate for 10-20 minutes then wipe over the surface
with a clean, dry, lint free cloth to remove any excess oil.
A minimum of three coats is recommended, sanding
lightly between coats. More coats may be required on
porous timbers or for a more durable finish. Allow 12
hours between coats and 24 hours after the last coatbefore use.
Sizes: 1 L • 2.5 L
L I B E R O N F L O O R O I L 9
Floor Oil
Wood flooring – Traditional finishes
A B L E N D O F N AT U R A L O I L S A N D
R E S I N T H A T P R O V I D E S A D U R A B L E
A N D S C R AT C H R E S I S TA N T F I N I S H .
LibtipOily cloths can self-
combust. Do not leave
impregnated cloths in
bundles. Before
discarding lay them
flat outside to dry to
avoid a fire hazard.
Coverage Application
Drying time Cleaning tool
Brush, clothor roller
White spirit
Kitchens and
bathrooms
1 L
10-12 m2
Min12 hours
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 10/24
10 L I B E R O N N A T U R A L F I N I S H F L O O R V A R N I S H
PurposeHighly resistant and exceptionally durable Natural Finish
Floor Varnish can be used throughout the family home.
Suitable for use on soft or hardwood flooring it is quick
drying and non-yellowing. May be mixed with Liberon
Wood Floor Dyes to create unique colour tones.
ApplicationSand the floor if required and remove all previous
finishes. Apply a reasonable coat of varnish evenly using
a paint brush or short hair roller and allow to dry for a
minimum of 2 hours. We recommend a minimum of 3
coats are applied, sanding lightly between coats. More
coats may be required for heavy traffic areas. Allow 24
hours for the final coat to dry before using the floor.
To create a tinted varnish add one 250 ml Liberon Wood
Floor Dye to one 2.5 L tin of Natural Finish Floor Varnishand mix thoroughly.
Sizes: 750 ml • 2.5 L
Libtip Apply successive coats
in a criss-cross format
(right to left then leftto right) with the final
coat in the direction of
the grain.
Finishes
•Clear Matt
•Clear Satin
• Wax Effect
– Light Oak
Coverage Application
Drying time Cleaning tool
Brushor roller
Water
1 L
10-12 m2
Min2 hours
Highresistance
Natural Finish Floor Varnish is
approved to European Eco-labelrequirements
• a limitation of air pollutionby solvents
• the absence of heavy metalsand substances harmful for the environment and health
• reduced sulphur emissionsduring production
• good performance for indoor use.
Kitchens and
bathrooms
Natural Finish
Floor Varnish
Wood flooring – Varnish finishes
A S U P E R I O R , E N V I R O N M E N TA L LY
F R I E ND LY , W AT E R BAS E D VAR NI S H
T H AT MA I NT A I NS T H E NAT U R AL F E E L
A N D LO O K O F T H E T I M B E R .
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 11/24
Purpose A quick drying, non-drip varnish for use on stairs and
other upright areas such as balustrade that is resistant
to heel impact and wear and tear. May be mixed with
Liberon Wood Floor Dyes to create unique colour tones.
ApplicationSand the floor if required and remove all previous
finishes. Apply a reasonable coat of varnish evenly using
a brush and allow to dry for a minimum of 2 hours. We
recommend a minimum of 3 coats are applied, sanding
lightly between coats. More coats may be required for
heavy traffic areas. Allow the final coat of varnish 24
hours drying time before using the floor.
To create a tinted varnish add one 250 ml Liberon Wood
Floor Dye to one 2.5 L tin of Hardwearing Floor Gel and
mix thoroughly.
Size: 2.5 L
L I B E R O N H A R D W E A R I N G F L O O R G E L 11
Hardwearing
Floor Gel
Wood flooring – Varnish finishes
D U R A B L E A N D H I G H P E R F O R M A N C E
WAT E R B A S E D VA R N I S H F O R S O F T
A N D H A R DW O O D F LO O R I N G .
Libtip We recommend Liberon
Wood Floor Dye is only
added to the varnish
for the first coat and
that subsequent coats
are varnish only.
Finish
•Clear Satin
Coverage Application
Drying time Cleaning tool
Brushor roller
Water
Hard wearing
1 L
10-12 m2
6 hoursbetween
coats24 final
Highresistance
Kitchens and
bathrooms
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 12/24
12 L I B E R O N P R E - V A R N I S H F O R W O O D F L O O R S
PurposeRecommended for use on bare wood or sanded floors
Pre-varnish reduces the darkening of the wood and helps
prevent tannins rising to keep the original beauty of the
timber when it is varnished. Reinforcing the durability and
adhesion of varnish it is designed for use with solvent
based products such as Liberon High Resistance Floor Varnish. Ideal for use on old pine and oak.
ApplicationEnsure the surface is clean, dry and free from previous
finishes. The product has a milky appearance which
disappears after application. Apply one coat evenly using
a brush or roller. Allow to dry for a minimum of 1 hour,
lightly sanding the surface with a fine sand paper before
applying a finish of varnish.
Sizes: 750 ml • 2.5 L
Pre-varnishfor wood floors
Wood flooring – Varnish finishes
Libtip Apply varnish plank
by plank while facing
the sunlight so you cansee exactly how much
excess or missed areas
you are dealing with.
U N I Q U E A N D I N N O V AT I V E P R O D U C T
T H AT E N S U R E S A L O N G L A S T I N G
A N D Q UA L I T Y F I N I S H T O W O O D
A N D PA R Q U E T F LO O R I N G .
Coverage Application
Drying time Cleaning tool
Brushor roller
Water
1 L
8-10 m2
Min1 hour
Kitchens andbathrooms
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 13/24
PurposeSuited to rooms that are in constant use such as
kitchens, lounges and hallways High Resistance Floor
Varnish offers a high quality stain and water resistant
finish in 24 hours. Its low odour formula and slip-
resistant surface make it ideal for use in the family home.
ApplicationSand the floor if required and remove all previous
finishes. If a stained floor is desired apply Liberon Floor
Dye prior to the varnish.
Apply High Resistance Floor Varnish evenly with a brush
or short hair roller. Allow to dry for a minimum of 6
hours. We recommend a minimum of 3 coats are applied,
lightly sanding the surface between coats. More coats
can be applied for a more durable finish or where foot
traffic is particularly heavy. Allow the final coat of varnisha minimum of 24 hours drying time before using the floor.
Size: 2.5 L
L I B E R O N H I G H R E S I S T A N C E F L O O R V A R N I S H 13
High Resistance
Floor Varnish
Wood flooring – Varnish finishes
A P O LY U R E T H A N E VA R N I S H AT 6 0 % T H E
H A R D N E S S O F G L A S S T H A T P R O V I D E S
E X C E P T I O N A L P R O T E C T I O N F O R
W O O D E N F LO O R I N G A N D A S U P E R I O R
R E S I S T A N C E T O F O O T T R A F F I C .
Libtip
Ideal applicationconditions for a
varnish are between
12°C and 25°C.
Finishes
•Clear Matt
•Clear Satin
• Wax Effect
– Light Oak
Coverage Application
Drying time Cleaning tool
Brushor roller
White spirit
1 L
10-12 m2
6 hoursbetween
coats24 final
Kitchens and
bathrooms
Highresistance
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 14/24
14 L I B E R O N W O O D F L O O R R E V I V E R
PurposeRevives and conditions worn varnished flooring by
masking minor scratches and marks. Ideal for regularmaintenance it protects against everyday wear and tear,
producing a tough and durable satin to gloss finish.
Application Apply a thin coat of diluted Wood Floor Reviver (2 parts
Wood Floor Reviver to 1 part water) evenly to the surface
using a sponge, mop or floor cloth and allow to dry for a
minimum of 30 minutes. On heavy traffic areas or badly
worn surfaces apply a second coat once the first coat
has dried thoroughly.
Size: 500 ml
Wood Floor Reviver
Wood flooring – Varnish finishes
LibtipSimply re-apply Wood
Floor Reviver as soon
as the surface begins to
look tired.
A C L E A R , A N T I - S L I P C OAT I N G
T H AT P R O T E C T S A N D E X T E N D S
T H E L I F E O F V A R N I S H E D A N D
P R E - VA R N I S H E D W O O D E N A N D
P A R Q U E T F L O O R I N G I N A S I M P L E
O N E - S T E P A P P L I C A T I O N .
Coverage Application
Drying time Cleaning tool
Cloth or mop
Water
Diluted500 ml
25-35 m2
Min30 mins
Non-slip
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 15/24
PurposeEffective removal of dirt and stubborn marks left by
grease, shoes and mud on laminate flooring. Suitable for
use on most laminate and vinyl flooring it restores lustre
to the surface and leaves a slip resistant finish. Also
contains anti-static agents to slow down the deposition
of dust.
ApplicationFor general cleaning add one cap full of Laminate Clean
and Seal to 5 L of warm water. Wash the floor using a
cloth or sponge mop and allow to dry. To remove
stubborn marks treat the affected area with a small
amount of neat Laminate Clean and Seal using a soft
scrubbing brush or cloth. To aid drying time wipe over
with a dry cloth.
Size: 1 L
L I B E R O N L A M I N A T E C L E A N A N D S E A L 15
A H I G H Q U A L I T Y,
C O N C E N T R A T E C L E A N E R
A N D C O N D I T I O N E R F O R
L A M I N A T E , V I N Y L A N D
L I N O L E U M F L O O R I N G .
LibtipUse the same amount
of Clean and Seal to
condition your lino or
vinyl floor, but allow a
little longer to dry.
Laminate Clean and Seal
Laminate flooring
Coverage Application
Drying time Cleaning tool
Cloth or mop
Water
200 ml
5 L water
Min30 mins
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 16/24
16 L I B E R O N L A M I N A T E R E V I V E R
Purpose
Revives and restores the protective layer of laminate andvinyl flooring in a simple one-step application. Helps hide
scuff marks and scratches while reducing long term wear
and tear.
ApplicationEnsure the floor is clean and dust free. Apply a thin coat
of Laminate Reviver evenly to the floor using a sponge,
mop or floor cloth and allow to dry for 30 minutes. On
heavy traffic areas or badly worn surfaces apply a second
coat once the first coat has dried thoroughly.
Size: 1 L
Laminate Reviver
Laminate flooring
LibtipFor a higher shine
apply further coats
of Laminate Reviver
as above.
T O U G H A N D
D U R A B L E A N T I - S L I P
R E V I V E R F O R
L A M I N A T E A N D
V I N Y L F LO O R I N G .
Coverage Application
Drying time Cleaning tool
Water
1 L
40-50 m2
Min30 mins
Cloth or mop
Non-slip
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 17/24
PurposeFor filling medium to deep scratches and poor fitting
joints in laminate flooring. Ideal for nail and pin holes thecolours can be blended together to match the surface.
ApplicationSelect the colour stick closest to that of the laminate
that requires filling. If in doubt choose a colour that is
slightly darker than the laminate.
Rub the repair stick across and along the scratch until it
is completely filled. Allow the wax to harden then buff
using a soft, lint-free cotton cloth. For superficialscratches and scuffs use Liberon Laminate Reviver.
Size: set of 3 BP
L I B E R O N L A M I N A T E R E P A I R S T I C K S 17
E A S Y T O U S E R E P A I R
S T I C K S T H A T D O N O T
R E Q U I R E S A N D I N G .
Libtip Always test products
first on a spare surface
or an inconspicuous
area to check colour,
compatibility and
end result.
Laminate Repair Sticks
Laminate flooring
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 18/24
18 L I B E R O N S T O N E F L O O R C L E A N E R
PurposeRemoves built-up layers of dirt, grease and Liberon Stone
Floor Shine from previously sealed and unsealedterracotta and natural stone flooring. Can be used neat
on stubborn stains.
ApplicationDilute Stone Floor Cleaner to a 25% solution in warm
water. Apply using a floor mop or sponge, rubbing more
vigorously over dirty areas. Allow the product to work on
the surface for 10-15 minutes then rinse with clean warm
water and allow to dry thoroughly.
To remove stubborn stains pour a small amount of neat
Stone Floor Cleaner onto the stain. Let the product work
for 15 minutes then scrub with a brush to remove the
stain. Rinse and allow to dry.
Sizes: 1 L • 5 L
Stone Floor Cleaner
Stone flooring
LibtipIf treating new stone,
once your floor hasbeen cleaned it will
need protecting from
water and staining
with a suitable sealer.
E AS Y T O U S E W AT E R
B A S E D C L E A N E R
F O R T H E G E N E R A L
M A I N T E N A N C E O F
S T O N E F L O O R S .
Application Cleaning tool
WaterCloth or mop
Coverage
1 L
15-20 m2
Drying time
Min 1 hour24 hours priorto refinishing
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 19/24
PurposeFeeds, seals and protects interior terracotta, slate, York
stone and many similar types of porous stone flooring.
Makes the surface resistant to water, drink and food
spillages and helps to reduce dusting and crumbling.
ApplicationEnsure the surface is clean and dry. Apply Colour
Enhancer Stone Floor Sealer using a brush or lint-free
cotton cloth and allow the sealer to penetrate for 10
minutes. Remove the excess with a clean lint-free cotton
cloth and dry for a minimum of 8 hours.
Check the surface is properly sealed by dropping a small
amount of water onto it. Leave for 10-15 minutes. If it
remains on the surface enough sealer has been applied,
if not then further coats are required. Finish with LiberonStone Floor Wax, or for a more durable surface with
Stone Floor Shine.
Note: several coats may be applied quickly on very
porous surfaces. The number of coats required will
depend upon the porosity of the stone.
Sizes: 1 L • 5 L
L I B E R O N C O L O U R E N H A N C E R S T O N E F L O O R S E A L E R 19
O I L B A S E D M U L T I - S T O N E S E A L E R
W I T H S T R O N G WAT E R- R E S I S TA N T
Q U A L I T I E S T H A T A D D S W A R M T H
T O N A T U R A L S T O N E B Y
E N H A N C I N G T H E C O L O U R .
Libtip A simple test will
identify whether a
particular stone
requires sealing. Just
put several drops of
water onto the stone
surface and leave for 10 minutes. If the
water is absorbed into
the stone then a sealer
is required.
Colour Enhancer
Stone Floor Sealer
Stone flooring
Application Cleaning tool
Brushor cloth White spirit
Drying time
Min 8 hours24 hours priorto refinishing
Coverage
1 L
10-15 m2
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 20/24
20 L I B E R O N N A T U R A L F I N I S H S T O N E F L O O R S E A L E R
PurposeHighly effective sealer for protecting interior terracotta,
slate, York stone, ceramic, marble and many similar types
of porous stone flooring. Makes surfaces resistant to
water, stains, food oils and grease marks. Ideal for new or
old stone and effective after just one coat on most
surfaces.
Application Apply Natural Finish Stone Floor Sealer generously with a
paint brush and allow to dry for one hour. Check if the
surface is properly sealed by dropping a small amount of
water onto the floor. Leave for 10-15 minutes and if the
water remains on the surface then enough sealer has
been applied. If not then further coats are required.
Repeat until properly sealed. Allow the final coat 24 hours to dry before use. If
required finish with Liberon Stone Floor Wax, or for a
more durable surface with Stone Floor Shine.
Sizes: 1 L • 5 L
Natural Finish
Stone Floor Sealer
Stone flooring
LibtipCarry out the drop test
once a year to checkyour floor is properly
sealed and re-apply
sealer as necessary.
NON- C OLOU R I NG W AT E R
B A S E D S E A L E R T H AT
M A I N TA I N S T H E N AT U R A L
L O O K O F T H E S T O N E .
Coverage Application Drying time Cleaning tool
WaterBrush
1 L
10-12 m2*
1 hourto touch
24 hours final
*depending upon porosity
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 21/24
PurposeProtects and nourishes stone, slate, terracotta, quarry tile
and other natural and man-made stone floor products
after sealing. The slip resistant finish enhances the
natural colour of the stone, helps prevent staining and is
resistant to scratching and scuffing. Ideal for use in
dining rooms and conservatories.
ApplicationEnsure the surface is clean, dry and free from previous
finishes. Apply a thin layer of Stone Floor Wax to the
floor using a cotton lint-free cloth or suitable brush,
ensuring the wax is applied evenly across the surface.
Allow to dry for 1-2 hours then buff to a satin sheen
using a brush, cotton cloth or buffing machine.
Sizes: 1 L • 2.5 L
L I B E R O N S T O N E F L O O R W A X 21
A H A R D W E A R I N G A N D
T R A D I T I O N A L S A T I N
F I N I S H F O R S E A L E D
S T O N E , G I V I N G A
B E A U T I F U L S O F T L U S T R E
T O T H E S U R F A C E .
LibtipsDo not wash waxed
floors with water.
Simply sweep or
vacuum and re-wax
when the surface looks
dry and dull.
Where surface water is
possible, i.e. kitchens
and utility rooms,
Liberon Stone Floor
Shine is recommended.
Stone Floor Wax
Stone flooring
Coverage Application
Drying time Cleaning tool
Brushor cloth
White spirit
1 L
10-12 m2
2 hours
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 22/24
22 L I B E R O N S T O N E F L O O R S H I N E
Purpose
Creates a protective and durable coating with long lasting shine that is ideal for use in areas of high foot traffic such
as kitchens and halls. It is also stain and water resistant.
ApplicationEnsure the surface is clean and dry. Dilute 3 parts Stone
Floor Shine to 2 parts warm water. Apply a thin coat of
Stone Floor Shine evenly over the whole surface using a
mop or sponge. Leave to dry for 30-60 minutes and the
shine will appear. On new surfaces and for a higher shine
apply additional coats.
Sizes: 1 L • 5 L
Stone Floor Shine
Stone flooring
LibtipDo not apply in thick
coats as this may
result in white marks.
Build-up the shine in
thin layers.
Q U I C K D R Y I N G A N D
S E L F - S H I N I N G F I N I S H
F O R S E A L E D
T E R R A C O T TA A N D
S T O N E F L O O R S .
Coverage Application
Drying time Cleaning tool
Mopor sponge
Water
1 L
15-20 m2
30-60mins
High
resistance
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 23/24
P R O D U C T O V E R V I E W 23
Product overview
Product Coverage Application Drying time Cleaning Sizes Low GMC EN71 High Kitchens &tool odour Part 3 resistance bathrooms
Wood flooring
Floor Cleaner1 L Brush or Min
White Spirit1 L
6-8 m2 steel wool 2 hours 5 L
Wood Floor Dye250 ml Foam applicator Min
Water 250 ml ✔ ✔2-4 m2 or brush 8 hours
Wood Filler As required Painter’s knifeMin
Water 125 ml2 hours
Two PartAs required Painter’s knife
MinWhite Spirit 200 g ✔Wood Filler 30 minutes
Floor Sealer1 L
Brush or clothMin
White Spirit1L
✔ ✔ ✔8-10 m2 5 hours 5 L25 L
Floor Wax1 L
Brush or clothMin
White Spirit1 L
✔12-15 m2 30 minutes 5 L
Floor Oil1 L Brush, cloth Min
White Spirit1 L
✔ ✔10-12 m2 or roller 12 hours 2.5 L
Natural Finish 1 LBrush or roller
MinWater
750 ml✔ ✔ ✔ ✔ ✔Floor Varnish 10-12 m2 2 hours 2.5 L
Hardwearing 1 LBrush or roller
MinWater 2.5 L ✔ ✔ ✔Floor Gel 10-12 m2 6 hours
Pre-varnish1 L
Brush or rollerMin
Water750 ml
✔ ✔8-10 m
2
1 hour 2.5 LHigh Resistance 1 L
Brush or rollerMin
White Spirit 2.5 L ✔ ✔ ✔Floor Varnish 10-12 m2 6 hours
Wood Floor 500 mlCloth or mop
MinWater 500 ml ✔Reviver 25-35 m2 30 minutes
Laminate flooring
Laminate Clean 200 ml inCloth or mop
MinWater 1 L ✔and Seal 5 L water 30 minutes
Laminate Reviver1 L
Cloth or mopMin
Water 1 L ✔40-50 m2 30 minutes
Stone flooring
Stone Floor 1 LCloth or mop
MinWater
1 LCleaner 15-20 m2 1 hour 5 L
Colour Enhancer 1 LBrush or cloth
MinWhite Spirit
1 L✔ ✔Stone Floor Sealer 10-15 m2 8 hours 5 L
Natural Finish 1 LBrush
MinWater
1 L✔Stone Floor Sealer 10-12 m2 1 hour 5 L
Stone Floor Wax1 L
Brush or clothMin
White Spirit1 L
✔10-12 m2 2 hours 2.5 L
Stone Floor Shine 1 L Mop or sponge 30-60 Water 1 L ✔ ✔ ✔15-20 m2 minutes 5 L
7/27/2019 Liberon Flooring Treatment
http://slidepdf.com/reader/full/liberon-flooring-treatment 24/24
Liberate the spirit of your home
Liberon Limited, Learoyd Road, Mountfield Industrial Estate, New Romney, Kent TN28 8XU
Tel: 01797 367555 Fax: 01797 367575 Technical advice: 01797 361136 www.liberon.co.uk
A V33 Group company
We’re as effective outdoors!For details of our comprehensive garden range call us on 01797 367555.
O U R P L E D G E . YO U R G U A R A NT E E .
L IBERON HAS DEVELOPED MARKET-LEADING, INNOVATIVE WOOD
AND S TONE TR E AT MENT P RODU CT S F OR OVE R A C E NTU RY,
ALL OU R P RODU CTS AR E GUAR ANTE E D TO P ROVI DE E FF E CT IVE ,
LONG-LAST IN G RESULTS WHEN A PPL IED CO RRECTLY.
I F YOU H AVE ANY QU E S T I ONS ABOU T T H E S E LE C T I ON OR U S E
OF L IBERON FLOORING PRODUCTS S IMPLY CONTACT L IBERON
T E C H NI C AL S E R V I C E S ON 0 1 7 9 7 3 6 1 1 3 6 F OR E XP E R T AD V I C E .