Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Sales information
EMT sales information 17.02.2021 Page 1
Dear Sir or Madam,
With this sales information we wish to inform you regularly about new options and changes
to the existing configurations for Liebherr wheeled excavators as well as material handling
machines. These new options and configurations are available in the Lias configuration
system and will also be partly included in the future versions of the equipment manual for
“wheeled excavators” and “material handling machines”.
You can navigate quickly by clicking on the topic concerned. You will then be taken
automatically to a page which shows details of the related option or configuration. New items
in the list are marked with the add on „NEW“.
Reinforced two-piece boom hydraulically adjustable 4.85 m in the HD
version for LH 18 M Industry 51.2020
Protective guard in front of the radiator intake, extractable for
LH 18 M Industry 51.2020
LED lightbar for Liebherr wheeled excavators 50.2020
New undercarriage variant for LH 26 M Industry 42.2020
New undercarriage variant for LH 40 M Port 42.2020
Liebherr generator set (previously GTS) 07.2020
“Double-sided load holding valve for tipping cylinder” while operating 07.2020
a tiltrotator with pallet fork
New paint on tool attachments for rail machines 07.2020
New Speeder versions 03.2020
Automatic digging brake for Timber material handling machines 01.2020
Stabilization assistant from LH 40 on 01.2020
Heavy counterweight optionally for LH 30 M Industry 01.2020
Hydraulic cab elevation with tilting function 30° 01.2020
Load chain for Likufix 33 08.2019
Fuel preheating (pre-assigned in Lias) 08.2019
The new Liebherr tilt bucket SL080 08.2019
Likufix protection 02.2019
New options and changes to configurations for
wheeled excavators, material handling machines
Please consider that this sales information just informs about the newest changes of options and configurations (marked
with „NEW“). Already existing ones in this document do not get updated retrospectively. Therefore the current availability
status can be found in the Lias offer system.
The availability of the new options respectively changes in configurations are marked regarding the following logic which is
similar to the one used in brochures: ● Standard + Option +* On request ✘ Not available
Liebherr-Hydraulikbagger GmbH
Liebherrstraße 12. • D-88457 Kirchdorf/Iller
Telefon +49(0)7354 80-0
www.liebherr.com
Sales information
EMT sales information 17.02.2021 Page 2
Reinforced two-piece boom hydraulically adjustable 4.85 m in the
HD version for LH 18 M Industry
Availability:
Customer benefits:
In Lias, you will find this new equipment as follows:
Starting from week 50/2020, the reinforced two-
piece boom hydraulically adjustable 4.85 m will
also be available in the HD version for the LH 18
M Industry, in combination with a 4-point
undercarriage. The HD two-piece boom
hydraulically adjustable is selected automatically
in Lias as soon as the machine is configured with
a 4-point outrigger. The standard variant of the
two-piece boom hydraulically adjustable cannot
be selected for a 4-point undercarriage.
The greater stability with a 4-point undercarriage
allows higher load capacities. To be able to
handle the resulting higher loads, the HD version
of the two-piece boom hydraulically adjustable is
an essential requirement.
Higher load capacities in combination with the 4-point outrigger for greater
productivity.
Safe and reliable material handling at the work site.
Option
The undercarriage with blade and 2-point-outriggers can still be combined with the standard
variant of the 4.85 m two-piece boom hydraulically adjustable and the mono boom; the HD
version of the two-piece boom hydraulically adjustable is also available with this undercarriage
version.
Sales information
EMT sales information 17.02.2021 Page 3
Protective guard (small meshed) in front of radiator intake,
extractable for LH 18 M Industry
Availability:
Customer benefits:
Starting from February 2021, the protective guard (small meshed) in front of the radiator
intake, extractable is also installed as standard for LH 18 M Industry. For dust-intensive
applications, the "reversible fan drive" and "air pre-filter with dust trap" options are also
available.
Quick and easy cleaning
Slows down the build-up of dirt on the engine and radiator
Increases machine availability
* Series
Sales information
EMT sales information 17.02.2021 Page 4
LED lightbar for Liebherr wheeled excavators
LED technology for greater longevity
Lower installation height (110 mm instead of 200 mm) for easier
transport
Customer benefits:
As of now, the halogen lightbar option is replaced by the new LED technology lightbar.
This is recommended for applications in very busy and hazardous areas and for work with a
high proportion of travel (inner city, road construction, trenching, etc.).
Availability:
In Lias, you will find this new equipment as follows:
Previous version: halogen
The following still applies:
Activated by switch (start/stop)
Not available in combination with top protective grating and/or top windscreen wiper
New version: LED
Installation height on cab: 200 mm 110 mm
Total width of lightbar: 1,000 mm 910 mm
Lightbar with 2 integrated rotating lights A total of 12 LED light modules / 6 LED
beacons at the ends / double flash
lighting sequence
Sales information
EMT sales information 17.02.2021 Page 5
New undercarriage variant for LH 26 M Industry
As of now, a new undercarriage variant is available for the LH 26 M Industry G6.0-D. You
can now also select the "Timber undercarriage" variant in LIAS. The machine with the
"Timber" undercarriage is specially designed for smaller sawmills and timber processing
firms. This machine will therefore be in direct competition with the
Sennebogen 723 and the Fuchs MHL 334 (MHL 434).
- Small front and tail swing radius for safe manoeuvring even in tight spaces
- Powerful traction drive for productive travel on slopes or for trailer
applications, while keeping fuel consumption extremely low
- Greater safety thanks to the robustness, stability and manoeuvrability of the
3.0 m wide undercarriage with all-wheel steering
- Perfect view of the working area with the different cab elevation variants and
large-sized glazing
Customer benefits:
You can find this new undercarriage variant as of now in the Lias product configurator under
the following menu item.
Sales information
EMT sales information 17.02.2021 Page 6
New undercarriage variant for LH 40 M Port
As of now, a second undercarriage variant is available for the LH 40 M Port G6.0-D. You
can now also select the single tyres option for the twin tyres variant. The single tyres variant
gives greater ground clearance and more ride comfort.
- Better compensation for unevenness in the ground
- Greater ride comfort with better damping in the tyres
- Lower risk of damage to the tyres because loose objects, such as pieces of
wood, cannot get stuck between the tyres
Customer benefits:
You can find the different undercarriage variants as of now in the Lias product configurator
under the following menu item.
Dimensions of the LH 40 M Port with twin tyres
Dimensions of the LH 40 M Port with single tyres
Sales information
EMT sales information 17.02.2021 Page 7
Liebherr generator set (previously GTS)
"Everything from a single source" – a central contact partner for all
issues and therefore short processing times and shorter downtimes
for the customers.
The newly labelled Liebherr generator set for magnet inserts brings the following
customer benefits:
Changeover date:
The use of magnetic plates in material handling machines for scrap recycling allows efficient
sorting and/or loading of ferromagnetic materials such as metal swarf, shearing scrap, cast iron
scrap etc.
Starting from MPS 01.01.2021, all GTS generator sets are being replaced by Liebherr
generator sets. It will then be possible in Lias to choose between the Liebherr generator set
and the Mozelt generator set.
The following page shows you examples of where the generator set can be found. Details of
which generator sets are available for which machines can be found in the current
"Equipment manual for material handling machines (May 2020 edition)".
Retrofits must be discussed in advance with the factory.
You will find this option in Lias as follows:
For years, depending on machine type, Liebherr-
Hydraulikbagger GmbH has been supplying ex works the
hydraulically or mechanically (V-belt) driven generator sets
manufactured by the GTS firm for operating the magnetic
devices on material handling machines.
With immediate effect, these GTS generator sets will be
labelled with the name Liebherr in Lias. This means that for
machines, tool attachments and magnet devices, the
customer will have a single contact partner for sales and
service. Maintenance will also be handled by the Liebherr
sales partner, and this should strengthen customer loyalty.
Separate information is provided on this subject, which gives
all details about maintenance, repairs, and training offers.
Sales information
EMT sales information 17.02.2021 Page 8
Position of generator set
Mechanically driven (V-belt):
LH 22 – LH 26 (on the uppercarriage
above the engine)
Hydraulically driven:
Starting from LH 30 (behind the operator's
cab in the cab access)
If you have any queries or suggestions on this subject, the MUT Product Management will be
pleased to assist you at any time.
Sales information
EMT sales information 17.02.2021 Page 9
"Double-sided load holding valve for tipping cylinder" while
operating a tiltrotator with pallet fork
Safety when operating a pallet fork and therefore high productivity at
the construction site thanks to high flexibility and manoeuvrability.
The new double-sided load holding valve for tipping cylinder offers the following
customer benefits:
On many construction sites, the use of a pallet fork ensures fast, safe and easy transport of
materials. Pallet forks are particularly suitable for lifting and transporting pallets and all kinds of
goods. The use of a pallet fork requires that the machine be fitted with a double-sided load
holding valve for tipping cylinder.
More and more of our customers are also attaching their
pallet forks with a tiltrotator. This combination makes it
absolutely necessary not just to have a load holding valve for
tipping cylinder, but to have a double-sides holding valve for
tipping cylinder.
The reason for this is that the tiltrotator allows endless
rotation of the pallet fork, even with the fork tines facing
towards the driver's cab. This results in greater flexibility at
the construction site but, for safety reasons, it also requires
additional protective measures on the excavator side. This
results in greater flexibility at the construction site but, for
safety reasons, it also requires additional protective
measures on the excavator side. These are ensured by fitting
the double-side load holding valve for tipping cylinder.
The direct attachment of a pallet fork with the tines facing towards the
driver's cab is not approved for safety reasons.
Sales information
EMT sales information 17.02.2021 Page 10
Availability:
A 910 Compact
A 912 Compact
A 913 Compact
A 914 Compact
A 914 A 916 Compact
A 916 A 918 Compact
A 918 A 920 A 924 A 924 Heavy Lift
Can be retrofitted to wheeled excavators A 913 Compact – A 920 with exhaust stages IV
and V.
Retrofits to wheeled excavators with exhaust stage IIIB must be checked using a Lias
consultant request.
In Lias, you will find the new equipment as follows:
Sales information
EMT sales information 17.02.2021 Page 11
Unlike the earthmoving wheeled excavators, the ZW excavators are painted as standard with
the special yellow colour specified by the Deutsche Bahn.
New paint on tool attachments for rail machines
Uniform colouring on attachments for rail and earthmoving machines allows
greater and more customisable availability of tool equipment.
This also ensures greater flexibility for hiring the widest variety of tool
attachments.
Batch orders require shorter delivery times, since the painting process is no
longer necessary
This also applies to the tool attachments for the ZW range, which till now have been painted in
the special DB yellow, although this was not absolutely necessary. From now on, the tool
attachments supplied for ZW excavators will be painted in grey just like the earthmoving
wheeled excavators, and no longer in the DB yellow applied till now. On the following page,
you can see a comparison of the various tool attachments in the new and previous paint colour
variants.
Standard paint finish: ZW excavators Standard paint finish: earthmoving wheeled
excavators
If a customer still insists on paint in the DB yellow colour, this must be submitted
through Lias with the corresponding fee using a Lias feasibility query.
Customer benefits of the new paint colour on tool attachments:
Availability:
A 922
Rail
A 924
Rail
R 914
Rail
Sales information
EMT sales information 17.02.2021 Page 12
Coating ZW attachments at now (LH-grew): Coating ZW attachments so far (DB-
yellow):
Backhoe Bucket Rail Ditch Cleaning Bucket Rail
Load Lift Hook Rail Tiltrotator with Backhoe
Bucket Rail
Hydro Magnet Rail Pallet Fork Rail
Clamshell Grab HD
Rail
Sorting Grab SG 20B
Rail perforated tongs
Load-Lifting Stick Rail
Backhoe Bucket Rail Ditch Cleaning Bucket Rail
Load Lift Hook Rail Tiltrotator with Backhoe
Bucket Rail
Hydro Magnet Rail Pallet Fork Rail
Clamshell Grab HD
Rail
Sorting Grab SG 20B
Rail perforated tongs
Load-Lifting Stick Rail
Sales information
EMT sales information 17.02.2021 Page 13
New Speeder versions
A number of Speeder versions are available as of now for the Liebherr Stage V wheeled
excavators listed below and, depending on the version, they allow speeds of up to 37 km/h
max. This option can now be recommended if the customer has to manage long stretches of
road (e.g. for the purpose of road construction) or frequently has to change the operating
location without a low-loader.
Driving time is shortened both at the construction site and between different
operating locations.
Reduced transport times = greater productivity.
When the Speeder is selected, depending on the machine type, the option
ride control is also recommended or obligatory necessary (see page 2).
The requirements (max. speed) that have to be met when using a Speeder
can differ depending on the country.
Customer benefits:
Depending on the machine, you can find the various Speeder versions as of now in the Lias
product configurator under the following menu item. On the following page you can see
which Speeder driving speed for which machine type will be available.
25
30
35
37
Sales information
EMT sales information 17.02.2021 Page 14
Retrofit (Stage IV and V)
Availability (Stage V):
A 910 Compact
A 912 Compact
A 913 Compact
A 914 Compact
A 914 A 916 Compact
A 916 A 918 Compact
A 918 A 920 A 924 A 924 Heavy Lift
Maximum speed30 km/h 30 km/h 35 km/h 37 km/h 37 km/h 37 km/h 37 km/h 37 km/h 37 km/h 37 km/h 25 km/h 25 km/h
Allowed in
Germany*25 km/h 25 km/h 35 km/h 37 km/h 37 km/h 37 km/h 37 km/h 25 km/h 37 km/h 25 km/h 25 km/h -
Ride control not
available
not
available
absolutely
necessary
absolutely
necessary
absolutely
necessary
absolutely
necessary
absolutely
necessary
absolutely
necessary
absolutely
necessary
absolutely
necessary
recom-
mended
recom-
mended
*country-specific regulations must be checked and observed
20 km/h to 30 km/h 20 km/h to 37 km/h 20 km/h to 35 km/h
A 910 Compact
A 912 Compact
A 913 Compact *
A 914 Compact
A 914
A 916 Compact
A 916 *
A 918 Compact *
A 918 *
A 920 *
A 924
A 924 Heavy Lift * Ride control necessary!
Please note:
For Stage IV machines, the scope of delivery for retrofitting varies
depending on the machine type and is therefore checked individually.
Retrofitting to the A 914 Standard and A 914 Compact Tier IV is not
possible.
Sales information
EMT sales information 17.02.2021 Page 15
Automatic digging brake for timber material handling machines
As of now, the automatic digging brake developed by Liebherr can be offered optionally to your
customers also for timber handling machines. With this option, the working brake on the timber
machine opens and closes automatically and thus assists the driver during applications that
require frequent starting and braking, for example at the sorting strand or when feeding the
sawing line.
Availability:
Operating principle:
The automatic working brake keeps the machine braked as long as the accelerator pedal is
in the neutral state and the machine is stationary. It is no longer necessary to operate the
brake pedal manually.
If the accelerator pedal is pressed again, the machine moves off. The brake pedal no longer
has to be released separately before moving off.
Ride comfort and fatigue-free working:
The operator does not need to press the brake pedal manually into the locked
position when stationary or when working.
Productivity when working:
With the automatic braking function, operator response times are no longer
required in applications that require frequent braking. This speeds up the working
processes, by leaving the operator free to concentrate on the essential.
Safety when working:
Greater safety when braking, since the automatic working brake always engages
immediately whenever the accelerator pedal is released and the machine is
stationary. There is therefore no risk of the vehicle rolling away.
Customer benefits:
+ Option
You will find this option as of now in the Lias product configurator :
LH 35 M
Timber
LH 50 M
Timber
LH 60 M
Timber
+ + +
Sales information
EMT sales information 17.02.2021 Page 16
Stabilization assistant from LH 40 on
As of now, the "outrigger wizard" option developed by Liebherr can be offered to your
customers for material handling machine LH 40 and highe. This option consists of an extension
of the individual outrigger control and ensures comfortable and secure stabilization of the
machine.
Availability:
Operating principle:
In Auto mode, the machine automatically levels itself as well as possible on the horizontal.
The digital spirit level indicates the machine alignment at all times.
The outriggers can also be controlled manually as before (all pads together or each pad
separately).
Operator’s comfort:
The operator simply activates the function and the machine is stabilized and
levelled fully automatically.
Productivity when working:
Time saved when extending outriggers, as the machine no longer has to be
aligned manually.
Safety when working:
Greater work safety and machine stability, as the machine is aligned as well as
possible on the horizontal.
Customer benefits:
You will find this option as of now in the Lias product configurator:
+ Option
LH 40 M LH 50 M / M HR LH 60 M / M HR LH 80 M / M HR LH 110 M / M HR
+ + + + +
Sales information
EMT sales information 17.02.2021 Page 17
LH 30 M option with heavy counterweight
As of now, the heavy counterweight option for the LH 30 M Industry can be selected as an
alternative to the standard counterweight.
Availability:
Comments:
Increased load lift capacity
Increased stability and stability
moment
Tail swing radius increased by
130 mm
Operating weight increased by
1.5 tonnes
Improved performance
With up to 700 kg increase in load lift capacity in the main working range
compared with the standard counterweight, the amount of material moved in
certain applications can be increased and the tool filling factor can be raised.
Greater efficiency:
A higher volume of handled material optimises the machine's economic efficiency
calculation where handling rate is measured against time.
Customer benefits:
+ OptionLH 30 M
+
*The graphic shows the difference
between load lift capacities.
Example: At a reach height of 12m
and a reach width of 4.5m, the "heavy
counterweight" variant has 0.6t more
load lift capacity than the "standard
counterweight" variant
Sales information
EMT sales information 17.02.2021 Page 18
Hydraulic cab elevation with tilting function 30°
As of now, the "Hydraulic cab elevator with 30° tilt
function" option developed by Liebherr is available
for the machines listed below, with delivery date
starting from 03/2020.
LH 18
Industry
LH 22
Industry
LH 24
Industry
LH 26
Industry
LH 30
Industry
LH 35
Industry
LH 40
Industry
LH 50
Industry
+ + + + + + + +
Availability* :
Operating principle:
Using the control lever on the right side of the
operator position, the cab can be tilted to a
maximum angle of 30°.
Stepless adjustment with the cab angle held at
any angle between 0 and 30°.
+ Option
You will find this option as of now in the Lias product configurator under the following menu:
* Retrofit
available
Customer benefits:
Ride comfort and fatigue-free working:
For tasks in the top working range, the cab tilt function maintains a neutral
position of the head to allow ergonomic working.
Productivity when working:
The improved upward vision through the front windscreen assists the driver in
positioning the equipment and attachment tool more quickly and in grasping
the handled material more quickly.
Safety when working:
The easier positioning of the working equipment and the securer hold on the
material, e.g. tree trunks, raise the level of safety while working.
Sales information
EMT sales information 17.02.2021 Page 19
Load chain for Likufix 33
For load lifting works on machines equipped with Likufix 33, two version of load chains are now
available in Lias (ex works):
Small manageable loop with
constant lift capacity.
A swivel is integrated in the version
with load hook (load hook with the
load turns, not the chain itself).
The customer benefits of the load chain for
Likufix 33 ex are as follows:
A 910
Compact
A 912
Compact
A 914
CompactA 914
A 916
CompactA 916
A 918
CompactA 918 A 920
A 922 / 924
RailA 924
A 924
Heavy
Lift
+ + + + + + + + - + - -
Availability:
Effective length: approx. 470 mm or
200 mm
Lift capacity: 6.700 kg each
Example fitted on the machine
In Lias you will find the load chain as follows:
Overview
Product
Attachment
Drallfänger
Sales information
EMT sales information 17.02.2021 Page 20
Fuel preheating (pre-assigned in Lias)
For trouble-free operation of modern diesel engines, the diesel fuel has to be a clear fluid. At
low temperatures, paraffin crystals start to form at a certain point, depending on any additives
present, and this causes the fuel to become cloudy. Paraffin crystal formation can then lead to
engine failure, or failure of the entire machine. Even with diesel fuels specially formulated for
the winter months, this occurs starting from temperatures of -10°. The operator is often
unable to understand the reason for the engine failure and calls customer service.
High reliability of the machine through all seasons.
Machine longevity because of diesel's optimal lubricating ability, which also
prevents damage to the injection system.
High level of machine availability at all temperatures.
The benefits of fuel preheating has the following customer benefits:
A 910
Compact
A 912
Compact
A 914
CompactA 914
A 916
CompactA 916
A 918
CompactA 918 A 920
A 922 / 924
RailA 924
A 924
Heavy
Lift
+ + + + + + + + + + + +
Availability:
If the customer says that the above mentioned
temperature ranges are not relevant (e.g. the machine
is not used in winter), the fuel preheating option can
be deselected.
The fuel preheating option can prevent these problems from occurring. The fuel is preheated
automatically as soon as the temperature drops to the lower temperature range (from approx.
5°C). In sales markets where these temperatures can occur, the fuel preheating option is,
from now on, included by default in the Lias quoting system for Liebherr wheeled excavators
and material handling machines.
LH 22 LH 24 LH 26 LH 30 LH 35 LH 40 LH 50 LH 60 LH 80 LH 110
+ + + + + + + + + +
Please discuss this subject actively with
the customer, in order to avoid any
unnecessary problems and costs later.
Sales information
EMT sales information 17.02.2021 Page 21
Perfect technical adaptation to the conditions ensures efficient and
productive operations.
Long life time due to protected cylinders.
Optimal filling and emptying behavior thanks and therefore highest
productivity.
The new Liebherr tilt bucket SL080
The Liebherr tilt buckets are the all-rounder among the Liebherr buckets and are a good
compromise of backhoe bucket and ditch cleaning bucket. High flexibility, cutting width
between backhoe bucket and ditch cleaning bucket, protected installation of the tilting cylinder
(2x50°) as well as an optionally available cutting edge make this tilt bucket indispensable on
many construction sites.
The new Liebherr tilt bucket SL080, with a cutting width of 1,400 mm, is perfectly designed for
use in walkway construction and therefore complements the well proven Liebherr bucket
range.
A 910
Compact
A 912
Compact
A 914
CompactA 914 A 916
A 918
CompactA 918 A 920
A 922 / 924
RailA 924
A 924
Heavy Lift
+ + + - - - - - - - -
The new Liebherr tilt bucket SL080 entails the following customer benefits:
Availability:
Sales information
EMT sales information 17.02.2021 Page 22
Likufix protection
From now on, a protection for Likufix is optionally availabe. This optional protection prevents
the high-quality Likufix, in particular the cables, from being damaged due to inappropriate
use, for example, it provides protection from rock fall. During demolition work, Likufix
protection also acts as impact protection.
Holes to accommodate for the hoop guard are included as standard on the Likufix block.
The hoop guard can therefore be easily retrofitted (retrofit).
The new fields of application bring the following customer benefits:
You are able to reassure your customers that even our existing
systems are continually being further developed to minimise any
downtime for the customer and therefore supporting the maximum
availability of each system.
Availability:
SW 33 SW 48 SW 66
● ● ●