Upload
duongminh
View
219
Download
4
Embed Size (px)
Citation preview
www.stannahlifts.co.uk
Stannah Maxilift 2.0 passenger lift range
Lift finishes and options
Designed with modern living in mind the Maxilift 2.0 offers clean, sleek lines and smoothoperation. We have a variety of car finish styles to suit every budget. Our customers can mix andmatch to ensure the lift complements the interior of any building.
Contents• Car walls
• Car ceilings
• Car floors
• Car operating panels
• Landing controls and indicators
• Mirrors and handrails
• Maxilift 2.0 standard specification
• Example configurations
Please note: costs may vary and are dependent on the choice of finishes selected.
MAXILIFT 2.0 – SECTION 1: CAR WALLSBACK TOCONTENTS
Car walls
NEXTSECTION
Vinyl skinplates
A90GTA
Cream
F12PPS
Silver Grey
B13
Slate Blue
PPS13
Cream Swirl
Stainless steel
Satin Mirror Linen Checks
Laminates
Glass
4090
Yellow
504090
Orange
RM
Burgundy
PS YB9
Green
PS BM15
Blue
MW
Neutral
AC7
Black
Samples are available on request – please call: 01264 339090The colours and designs reproduced in this document have been matched as closely as thescanning and printing process will allow. It is recommended you obtain samples prior to finalspecification. We are continually developing and improving our range of products and finishesand we therefore reserve the right to alter or amend the specification without prior notice.
Please note All skirting, corner profiling and entrance returnsare satin stainless steel as standard excluding vinylskinplate where it matches the chosen colour.The stainless steel grading is AIS1441 as standard.We also offer AIS1304 as a special option.
DU1715VV
Light Blue
DU8110
Light Grey
2416
Grey Chestnut Woodgrain
2982
Sand Woodgrain
2042
Redwood
2228
Birch Woodgrain
2307
Mahogany
5410
Dark Pear
AB1306
Walnut
5372
Golden Oak
MAXILIFT 2.0 – SECTION 2: CAR CEILINGSBACK TOCONTENTS
Car ceilings
PREVIOUSSECTION
NEXTSECTION
Standard
O55Mirror stainless steel and plexiglassdiffuser. 3x fluorescent tubes.
Panel
Options
O3Mirror stainless steel and plexiglassdiffuser. 2x fluorescent tubes + 4x LEDspots.
Frame
O14Mirror stainless steel and plexiglassdiffuser. 4x fluorescent tubes.
Grid
O11Mirror stainless steel and plexiglassdiffuser. 4x fluorescent tubes.
Bubble
O10Mirror stainless steel and plexiglassdiffuser. 3x fluorescent tubes.This style is also suitable for lowheadroom cabins.
Aperture
Please note All suspended ceilings with stainless steel finishas standard.
All ceilings are available with standard halogenlighting (no. of lights is dependent on cabinsize) or high energy efficiency (LED).
MAXILIFT 2.0 – SECTION 3: CAR FLOORSBACK TOCONTENTS
Car floors
PREVIOUSSECTION
NEXTSECTION
PVC flooring
Laminate flooring†
Artificial granite†
RW
White
RB
Beige
RK
Black
Samples are available on request – please call: 01264 339090The colours and designs reproduced in this document have been matched as closely as thescanning and printing process will allow. It is recommended you obtain samples prior to finalspecification. We are continually developing and improving our range of products and finishesand we therefore reserve the right to alter or amend the specification without prior notice.
Please note:Floors can be left recessed forfinishing by others.
6801
Black Sparkle
6768
Grey Sparkle
MX19101
Sandstone
8766
Black Oak
1675
Birch
8459
Dark Cherry
8096
Grey Chestnut
MAXILIFT 2.0 – SECTION 4: CAR OPERATING PANELSBACK TOCONTENTS
Car operating panels
PREVIOUSSECTION
NEXTSECTION
Standard car operating panel200mm(w) x 2000mm(h)Satin stainless steel with dot matrixposition and direction of travel indicator(LCD position indicator optional)
AKC BES
MT42
Radius cornered squares 30 x 30mmSatin stainless steel or mirror stainless steel
Push buttons
MAXILIFT 2.0 – SECTION 5: LANDING CONTROLS & INDICATORSBACK TOCONTENTS
Landing controls & indicators
PREVIOUSSECTION
NEXTSECTION
Landing indicators†
SMRQ 909DMA
230mm(w) x 92mm(h) x 20mm(d)Satin stainless steel
Landing operating panels†
Standard configurations
AKL 001 SMRQ 300A
Please note:SMRQ & SMSC call button panels showncan be surface mounted direct onto wallor lift architrave – no need for apertures
SMSC 600
Surface mounted
Single buttoncollective.
Optional highest call-down collective.
88mm(w) x 202.4mm(h)
Flush mounted
Single button collective.
Optional highest call-down collective.
85mm(w) x 180mm(h)
Surface mounted
Fully directional callcollective.
88mm(w) x 202.4mm(h)
† ADDITIONAL NOTES
MAXILIFT 2.0 – SECTION 6: MIRRORS AND HANDRAILSBACK TOCONTENTS
Mirrors and handrails
PREVIOUSSECTION
NEXTSECTION
Half height, full width mirror fitted as standard Full height and narrow optionsavailable
Mirrors
Handrails
K2a mirror stainless steel available as standard. EN81-70 non-compliant.
K3 mirror stainless steel available as standard. EN81-70 compliant.
MAXILIFT 2.0 – SECTION 8: STANDARD SPECIFICATIONBACK TOCONTENTS
Maxilift 2.0 standard specification
PREVIOUSSECTION
NEXTSECTION
Lift car: fabricated steel lift car frame includingheader assembly, platform buffer plates andguide shoes with lubricators
Car & landing doors: finished in stainless steel
Doors: 2hr fire-rated doors in 800, 900 & 1000mmwidth, 2000mm height
Communication options: EN81-28 compliantautodialler
Motor drive type: electronic hydraulic valve withoptional VVVF drive, MRL
Configuration: cantilever sling design mounted ona load-bearing wall
Rated speed: up to 1 m/s
Additional standard features:• Automatic relevelling to landing floor• Anti-creep device to prevent movement away from landing
• Overload weighing device• Emergency lighting within lift car giving 3hr duration
MAXILIFT 2.0 – SECTION 9: EXAMPLE CONFIGURATION 1BACK TOCONTENTS
Example configuration 1
PREVIOUSSECTION NEXT PAGE
Walls & skirting:Silver Grey (F12 PPS) vinyl skinplate
Handrail:K3 mirror stainless steel handrail
Car operating panel:Standard satin stainless steel
Ceiling:Panel (O55) Stainless steel mirror and plexiglass3x fluorescent tubes
MAXILIFT 2.0 – SECTION 9: EXAMPLE CONFIGURATION 2BACK TOCONTENTS
Example configuration 2
PREVIOUSSECTION NEXT PAGE
Walls & skirting:Satin stainless steel
Handrail:Custom handrail
Car operating panel:Standard satin stainless steel withround push buttons
Ceiling:Aperture (O10) Mirror stainless steel and plexiglass3x fluorescent tubes
MAXILIFT 2.0 – SECTION 9: EXAMPLE CONFIGURATION 3BACK TOCONTENTS
Example configuration 3
PREVIOUSSECTION
Walls & skirting:Redwood (DU5610HG) laminate andsatin stainless steel
Handrail:Custom handrail
Car operating panel:Standard satin stainless steel withround push buttons
Ceiling:Panel (O55)Stainless steel mirror and plexiglass3x fluorescent tubes
Additional notes
MAXILIFT 2.0 – ADDITIONAL NOTES – LANDING CONTROLS & INDICATORS
Additional notes – landing controls & indicators
RETURN TO PAGE
LANDING CONTROLS & INDICATORS
• Travel indicatorsThe landing lift travel indicator is on all landing levels.
• Landing control optionsThere are an array of options within the display including LED or LCD and round instead of square buttons. For further details please contact us.
www.stannahlifts.co.uk
Stannah LiftsAnton Mill, Andover, Hampshire SP10 2NXTelephone: 01264 339090