Upload
giat1h
View
359
Download
7
Tags:
Embed Size (px)
Citation preview
SERIES
LightSmart-PE150
PDH Mullti-service Optical Transmission
LightSmart-PE150 is the PDH multi-service intelligent management fiber transmission equipment,
which is designed with the increases of customers’ demands and the requirements of the high
reliability. It provides up to 16*E1 channels, 4*10/100 Based-T Ethernet, 16*data channels (V.35, RS-
530, X.21) or mixed configurations, supports optical interfaces 11 backup and ALS (Automatic Laser
Shutdown/Reduction) functions, realizes Media Converter, traditional PDH, RS232 Fiber Modem access
in a single network platform. Supporting network management system based on local LCD/menu keys
and PC platform, full management functions reduce the time and cost of the network maintenance.
Special Feature for Product
Offer 16*E1 (2.048 Mbps) interfaces,
two styles unbalanced interface
(BNC) and balanced interface (RJ-
45)
Specifications
E1 interface
Data rate: 2.048Mbps
Tolerance: ±50ppm
Line code: HDB3
Support 4*Ethernet interface Transmission capacity: 16*E1
100Mbps, Full/Half duplex auto-
negotiation and auto MDI/ MDIX,
and support the transmission of IEEE
802.1Q VLAN frame and maximum
1536 Byte VLAN frame
Support 16*data channels, V.35/RS-
530/X.21, n*64kbps, co-directional/
contra-directional modes
An official phone interface is
provided, not occupy E1 channel
Impedance: 75Ω unbalanced/ 120Ω balanced
Electric characteristic: comply with ITU-T G.703 standard
Jitter characteristic: comply with ITU-T G.823 standard
Jitter tolerance: comply with ITU-T G.823 standard
Optical interface
Dual optical interfaces, 1+1 backup and ALS function.
System Gain: 19~30dB
Connector: FC (standard)/SC (optional)/ST (optional)
Type: dual-fiber (standard)/single-fiber (optional)
Wavelength :1310nm/1550nm/1550nm WDM.
1+1 Hot-swappable optical Ethernet interfaces
protection with ALS function
Enhanced LCD display with menu
keys buttons and LEDs for
managements and monitoring
Built-in relay for alarm out, ideal for
external circuit connection and alarm
system building
Support two power supplies backup
Standard: comply with IEEE 802.3, 802.1Q
Data rate: 100 Mbps
Interface rate: 10/100 Mbps auto-negotiation
Transmission capacity: 4*10/100 Based-T
Link mode: MDI-MDIX autosense
Max frame length: 1536 Byte
Connector: RJ-45
Data interfaces
Card typeV.35, RS-530, X.21
Highly integrated hardware circuit, Data rate , n=1~32
power consumption is less than 10W co-directional/contra-directional operation modes Loop-backlocal loop back, remote loop back
LightSmart-PE150
PDH Mullti-service Optical Transmission
Power supply
Specifications (continued) Environment
Voltage: AC220V/AC110V/ DC48V/DC24V
Dual power supply (optical)
Power consumption: <10W
Weight: 3.0Kg
Typical Application
Ordering Information
Operating temperature:30~50
Storage temperature:40~70
Relative humidity: 0%~95%, non-condensing.
Size: 44.5 mm(H) x 485mm(W) x 220mm(D)
LightSmart-PE150-X1X2X3X4X5X6*n X1Optical Link Type
1F Single Optical Link
2F Dual Optical Link (1+1 auto protection)
X2Laser Module Type
MM 1310 nm MLM laser module, 20 km
S3 1310 nm SLM laser module, 30 km S5 1310 nm SLM laser module, 50 km
S7 1310 nm SLM laser module, 70 km
LA 1550 nm SLM laser module, 100 km
X4Power Module Type
A1 Single AC power module
A2 Dual AC power module
D1 Single DC power module
D2 Dual DC power module
AD One AC and one DC power module
X5E1 Interface Type
BW 120 Ohm Balance, wire wrap adapter
BJ 120 Ohm Balance, RJ-45 adapter cable
WD 1550 nm SLM laser module, WDM ready UB 75 Ohm Unbalance, BNC adapter cable
X3Laser Module Connector Type
FC FC/PC type laser module connector
SC SC type laser module connector
ST ST type laser module connector
X6*nPlugg-in Unit (n=number of unit)
E1U 4*E1 unit
EthU 1*10/100 Based-T Ethernet unit
V35 4*V35/RS-530/X.21 Data unit
Copyright © 2001-2006