Light Compaction EquipmentFull Product Range - LF / LG / LH / LP / LT / LX

Gravel SiltSand Clay

Light-weight equipmentfor heavy-duty purposes

Manoeuvrability, ergonomics and versatility are hallmarks of our light compaction machines. When it comes to engineering quality and cost-efficiency they share the solid foundation of Dynapac research and experience. We also listen to our customers, a key way to get input for future devel-opment.

Forward PlatesDynapac offers a full range of forward plates, speciallydesigned for compacting asphalt and granular soils.They are ideal for small repair and maintenance work, such as driveways and pathways, parking lots and backfilling in trenches.

Forward and Reversible PlatesDynapac’s forward and reverse platesconstitute an economical alternative and compliment to a roller. Being all-roundmachines, they are specially designedto compact soil in narrow areas.

Dynapac light-weight equipment for outstanding end results.

At Dynapac, we always strive to find new ways and better solutions. Pro-ductivity, performance, ergonomics and environmental considerations are prioritized areas. But equally important is your satisfaction and success.

Subbase Base Rockfill Asphalt

RammersDynapac’s range of rammers is designed for compacting cohesive soils, such as clay and silt but also sand and gravel. They are ideal for small repair jobs and in narrow areas, such as trenches or housing sites.

AsphaltRockfill

Double Drum RollersDouble drum rollers are suitable for compacting thin layers of granular soils and asphalt. They are mostly used for small jobs, repair work and compaction in narrow areas. High frequency technology and a power-ful diesel engine give impressive performance with regard to the machine size.

Trench RollersThe Dynapac LP8504 roller is the perfect choice forcompacting cohesive and granular soils in con-nection with backfills, foundation work and similar projects. With no overhang, the LP8500 is also well suited for compaction work close to walls and other obstacles.

Made to cope with tough conditionsThrough the use of a cyclone pre-filter and a high capacity main airfilter, together with the built-in fuel filter, the Dynapac rammers are made to cope with toughest of conditions, where a demand for hard hitting compaction is needed.

Serviceability and daily maintenanceThe LT rammer series features extremely easy access to all daily maintenance points. Simple solu-tions like changing the airfilter without use of tools are much appreciated by the user.

Dynapac rammers are suitable for applications on both granular and cohesive soils, where strict requirements are imposed for compac-tion in narrow areas, trenches and repair work.

A wide range for tough conditionsRammers

Operation

Idle

Stop

Easy handling for top performanceTo ensure easy handling and optimal performance Dynapac engineers have developed a multi-func-tional fuel tank featuring: Breather shut off, Electri-cal shut off, Shut off fuel and Throttle control in three fixed positions (Stop/Idle/Run).The fuel tank has a high capacity built-in fuel filter for optimal engine performance. The fuel filter can be changed with filled tank.

Dynapac rammers equipped with Honda GX100 engine have a new carburator allowing full accel-eration from idel to full speed without interrup-tions. Together with the new Dynapac Air Breather System, which replaces the primer pump, the engine can be very easily started after refueling.

Air breather

Lifting handle on foot for easier transportation.

Efficient shock absorbers to reduce hand/arm vibration with integrated handle stop.

Multi-functional fuel tank with easy to reach throttle control with three fixed positions.

Strong engine protection.

Durable rammer engines for excellent reliability.

Dynapac Air Breather System makes the primer pump obsolete on the new Dynapac rammers.

Single lifting point on crank case for easier handling, reducing wear on shock absorbers.

For flush compaction close to obstacles

Round Forward Plate

The LX90 vibratory plate compactor features a unique round base that allows flush compaction next to posts, pillars, guardrails, manholes, drain-age inlets and foundations. The design of LX90 makes it easy to manoeuvre around obstacles.

Dynapac LT5004

Dynapac LT604

Dynapac LT6004

Dynapac LT700

Dynapac LT7000

Dynapac LT800

A wide range for though conditionsRammers

RAMMERS

LT604 LT604 LT700 LT800 LT800 LT5004 LT5004 LT6004 LT6004 LT7000Operating mass (kg) 64 65 74 84 85 60 62 68 69 78

Force/blow (kN) 14,8 14,8 18,6 21,4 21,4 10 10 14,8 14,8 18,6

Speed (m/min) 15-17 15-17 15-18 13-16 13-16 15-18 15-18 15-18 15-18 15-18

Plate width (mm) 230 280 280 280 330 150 230 230 280 280

Amplitude (mm) 65-75 65-75 70-80 75-85 75-85 50-60 50-60 65-75 65-75 70-80

Frequeny (Hz) 12 12 12 12 12 11 11 12 12 12

Engine brand Honda Honda Honda Hatz Hatz Honda Honda Honda Honda Honda

Rated power (kW) 2,2 2,2 2,9 3,4 3,4 2,2 2,2 2,2 2,2 2,9

Sound power, guaranteed (LwAdB(A) 104 104 107 106 106 104 104 104 104 107

Sound pressure at operators ear (LpAdB(A) 91 91 96 96 96 91 91 91 91 96

H/A vibrations, standard handle (m/s2) 7 7 11,9 12,6 12,6 6,4 6,4 4,9 4,9 9,6

Part No. 4812099076 4812099077 4700770558 4700770560 4700770579 4812099078 4812099079 4812099080 4812099081 4700770604

Op. and Maintenance Manual ID (see below) ILT604-1EN ILT604-1EN ILT700-1EN ILT800EN ILT800EN ILT5004-1EN ILT5004-1EN ILT6004-1EN ILT6004-1EN ILT7000-1EN

ROUND FORWARD PLATE

LX90Operating mass (kg) 96

Speed (m/min) 22

Plate diameter (mm) 450

Engine brand Honda

Rated power (kW) 4,0

Sound power, guaranteed (LwAdB(A) 104

Sound pressure at operators ear (LpAdB(A) 92

H/A vibrations, standard handle (m/s2) 6,1

Part No. 4700770267

Op. and Maintenance Manual ID (see below) ILX090EN

Important: Full details of measurements are available in the Operation and Maintenance Manuals of the product (see table above for ID number). They can be found on www.dynapac.com/en/partsandservices/dynadoc/

Important: Full details of measurements are available in the Operation and Maintenance Manuals of the product (see table above for ID number). They can be found on www.dynapac.com/en/partsandservices/dynadoc/

Dynapac vibration reducing handle reduces exposure to hand-transmitted vibration compared to plate models without such handles. The handle gives high operator comfort and the vibration values level are below the 2,5 m/s2 daily exposure action value for an eight-hour refer-ence period according to EU directive EC/2002/44. For the Dynapac LF75, as an example, the test values are 6 m/s2 without handle and 1,2 m/s2 with the vibration reduced handle.

The Dynapac LF forward plates are de-signed for compacting asphalt and granular soils. With Dynapac technology, you get quality, reliability and value for money.

Speed and performanceThe latest Dynapac LF forward plates are fast. Approximately 20% faster than previous Dynapac models – and with increased quality of the finished job. Our forward plates give you the possibility to reach a better end result than previously, such as with the specially engineered bottom plate, designed to leave no marks.

Freedom of choice The LF plates are easily converted from soil to asphalt work, simply by hooking on a water tank.

Outstanding in operationIn tight and complicated spaces the LF plates prove their excellence. The handle is aligned with the centre of the plate for supreme and easy manoeuvrabil-ity, and it can even be raised to a vertical position in order to avoid obstacles. It is easily folded for transportation and storage.

Versatile plates for increased efficiency

Forward Soil & Asphalt Plates

The values were obtained by laboratory type testing in accordance with EN500-4 standard. The values are not adequate for use in risk assessments and values measured in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way the user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user.

Water distribution – a key quality factorThe Dynapac LF -series is designed to water the entire contact surface is uniformly. The key is a unique water distribution system, integrated into the bottom plate.

No pipes, and no sprinklers to clean. The water consumption is easily optimized by means of a flow adjustment valve, easily reached by the opera-tor. Together with the removable water tank, with a large secured cap, this makes refills swift, simple and less frequent.

Removable water tank: just clip it on your plate to work on asphalt.

Vibration reduced handle.

Standard lifting eye for crane lifting. Positioned to keep the machine in bal-ance during lifting.

The LF series has a unique design of the bottom plate and its edges give a well-defined contact surface to avoid marks on the surface. Contact surface with asphalt in blue.

Some of the options available for the LF range are handles for manual lifting, protection frames, block paving kit to suit specific jobs or a design cover which can be added on the soil machines.

FORWARD PLATES - soil

LF50 LF60 LF75 LF75 LF80 LF100 LF100Operating weight (kg) 52,5 57,5 79,8 83,2 82,1 94,9 103,7

Centrifugal force (kN) 8,4 10,4 15 15 19 17 17

Speed (m/min) 24 25 27 24 34 25 25

Plate width (mm) 320 350 420 500 420 500 500

Amplitude (mm) 0,9 0,9 1,0 1,0 1,3 0,9 0,9

Frequency (Hz) 95 95 95 95 95 95 95

Engine brand Honda Honda Honda Honda Honda Honda Hatz

Rated power (kW) 2,2 2,2 4,1 4,1 4,1 4,1 2,5

Sound power, guaranteed (LwAdB(A) 100 100 102 102 103 104 104

Sound pressure at operators ear (LpAdB(A) 89 88 91 91 91 93 93

H/A vibrations, (m/s2) 6,9 7,9 6,0 6,0 6,7 6,0 9,3

H/A vibrations, vibration reduced handle (m/s2) 1,9 1,9 1,2 1,2 1,2 1,3 1,9

Part No. 4812099036 4812099039 4812099042 4812099047 4812099051 4812099055 4812099060

Op. and Maintenance Manual ID (see below) ILF050-1EN ILF060-2EN ILF075-2EN ILF075-2EN ILF080-1EN ILF100-1EN ILF100-1EN

FORWARD PLATES - soil

LF130* LF130*Operating mass (kg) 134,7 141,0

Centrifugal force (kN) 20 20

Speed (m/min) 22 22

Plate width (mm) 500 500

Amplitude (mm) 0,9 0,9

Frequency (Hz) 95 95

Engine brand Honda Hatz

Rated power (kW) 4,1 2,5

Sound power, guaranteed (LwAdB(A) 104 104

Sound pressure at operators ear (LpAdB(A) 93 93

H/A vibrations, standard handle (m/s2) 5,4 9,3

H/A vibrations, vibration reduced handle (m/s2) 1,1 1,9

Parts number 4812099064 4812099065

Op. and Maintenance Manual ID (see below) ILF130-1EN ILF130-1EN

Dynapac LF50

Dynapac LF60

Dynapac LF130

Dynapac LF75

Dynapac LF80

Dynapac LF100

Soil equipped machinesForward Soil & Asphalt Plates

Important: Full details of measurements are available in the Operation and Maintenance Manuals of the product (see table above for ID number). They can be found on www.dynapac.com/en/partsandservices/dynadoc/

* with transport wheels

The removable water tank makes water filling easy. Take the tank to a water tap or to the large water tank on your truck instead of the whole machine.

FORWARD PLATES - soil

LF50 LF60 LF75 LF75 LF80 LF100 LF100Operating weight (kg) 52,5 57,5 79,8 83,2 82,1 94,9 103,7

Centrifugal force (kN) 8,4 10,4 15 15 19 17 17

Speed (m/min) 24 25 27 24 34 25 25

Plate width (mm) 320 350 420 500 420 500 500

Amplitude (mm) 0,9 0,9 1,0 1,0 1,3 0,9 0,9

Frequency (Hz) 95 95 95 95 95 95 95

Engine brand Honda Honda Honda Honda Honda Honda Hatz

Rated power (kW) 2,2 2,2 4,1 4,1 4,1 4,1 2,5

Sound power, guaranteed (LwAdB(A) 100 100 102 102 103 104 104

Sound pressure at operators ear (LpAdB(A) 89 88 91 91 91 93 93

H/A vibrations, (m/s2) 6,9 7,9 6,0 6,0 6,7 6,0 9,3

H/A vibrations, vibration reduced handle (m/s2) 1,9 1,9 1,2 1,2 1,2 1,3 1,9

Part No. 4812099036 4812099039 4812099042 4812099047 4812099051 4812099055 4812099060

Op. and Maintenance Manual ID (see below) ILF050-1EN ILF060-2EN ILF075-2EN ILF075-2EN ILF080-1EN ILF100-1EN ILF100-1EN

Dynapac LF75 Dynapac LF100Dynapac LF80

FORWARD PLATES - asphalt

LF75* LF75* LF80* LF100 LF100* LF100*Operating mass (kg) 91,7 95,4 94,0 94,6 107,1 116,1

Centrifugal force (kN) 15 15 19 17 17 17

Speed (m/min) 27 24 34 25 25 25

Plate width (mm) 420 500 420 500 500 500

Water sprinkler kit (l) 13 13 13 13 13 13

Amplitude (mm) 1,0 1,0 1,3 0,9 0,9 0,9

Frequency (Hz) 95 95 95 95 95 95

Engine brand Honda Honda Honda Honda Honda Hatz

Rated power (kW) 4,1 4,1 4,1 4,1 4,1 2,5

Sound power, guaranteed (LwAdB(A) 102 102 103 104 104 104

Sound pressure at operators ear (LpAdB(A) 91 91 91 93 93 93

H/A vibrations, standard handle (m/s2) 6,0 6,0 6,7 6,0 6,0 9,3

H/A vibrations, vibration reduced handle (m/s2) 1,2 1,2 1,2 1,3 1,3 1,9

Parts number 4812099045 4812099049 4812099053 4812099057 4812099059 4812099061

Op. and Maintenance Manual ID (see below) ILF075-2EN ILF075-2EN ILF080-1EN ILF100-1EN ILF100-1EN ILF100-1EN

Asphalt equipped machines

Important: Full details of measurements are available in the Operation and Maintenance Manuals of the product (see table above for ID number). They can be found on www.dynapac.com/en/partsandservices/dynadoc/

* with transport wheels

Dynapac reversible plates are known for their high compaction efficiency.Over the years Dynapac has studied com-paction and can today recommend the right Dynapac machine for your application.

The range of reversible plates are an economi-cal alternative or compliment to a roller. These allround machines are specially designed to compact soil in confined areas, such as in trenches and parking lots, among other areas. Reversible plates are also suitable for special applications, such as block paving.

Dynapac also offers a range of fully hydraulic reversible plate compactors, the LH range.

Heavy-duty bottomplates for tough workThe bottom plates on Dynapac LG reversible plates are made of Hardox 400, which is abrasion resist-ant with a hardness of 400 HBW.

Excellent allround plates for soil compactionReversible Plates

Easy-to-adjust handle and service friendly design

The new LG400 Dynapac forward and reverse plates feature handles easy

to adjust for each operator and a service friendly design with easy access to all vital parts.

Well protected engine by heavy-duty protecting frame.

Heavy-duty Hardox 400 bottom plate.

Fixed handle-grip for tough working conditions.

Vibration reduced handle.

Straps to secure the joints between bottom plate and engine.

Impact resistant steel covers.

The LG & LH ranges offers different widths of bottom plates.

Dynapac LH800

Dynapac LG200 Dynapac LG300

Dynapac LG500

Dynapac LH700

Dynapac LG160 Dynapac LG400

FORWARD AND REVERSIBLE PLATES

LG300 LG300 LG300 el LG300 el.start

LG500 LG500 LG500 el.start

LG500el.start

LH700el.start

LH800

Operating mass (kg) 282 287 302 307 502 505 522 525 780 820

Centrifugal force (kN) 40 40 40 40 60 60 60 60 95 95

Speed (m/min) 35 25 25 25 24 24 24 24 30 30

Plate width (mm) 500 600 500 600 550 750 550 750 660 660

Amplitude (mm) 1,7 1,7 1,7 1,7 2,1 2,1 2,1 2,1 2,5 2,5

Frequeny (Hz) 68 68 68 68 60 60 60 60 53 53

Engine brand Hatz Hatz Hatz Hatz Hatz Hatz Hatz Hatz Hatz Hatz

Rated power (kW) 4,2 4,2 4,2 4,2 8,2 8,2 8,2 8,2 11,0 11,0

Sound power, guaranteed (LwAdB(A)

108 108 108 108 109 109 109 109 109 109

Sound pressure at opera-tors ear (LpAdB(A)

94 94 94 94 96 96 91 91 95

H/A vibrations, standard handle (m/s2)

1,7 1,7 1,7 1,7 3,4 3,4 2,1 2,1 3,4

Parts number 4700770638 4700770682 4700770618 4700770683 4700770503 4700770620 4700770504 4700770505 4700770538 4700770572

Op. and Maintenance Manual ID (see below)

ILG300-2EN ILG300-2EN ILG300-2EN ILG300-2EN ILG500-1EN ILG500-1EN ILG500-1EN ILG500-1EN ILH700EN ILH800EN

FORWARD AND REVERSIBLE PLATES

LG160 LG160 LG160 LG160 LG200 LG200 LG200el.start

LG300 LG300

Operating mass (kg) 155 161 169 175 217 231 247 265 270

Centrifugal force (kN) 28 28 28 28 36 36 36 40 40

Speed (m/min) 22 22 22 22 25 25 25 25 25

Plate width (mm) 330 450 330 450 500 500 500 500 600

Amplitude (mm) 1,4 1,4 1,4 1,4 1.9 1.9 1.9 1,7 1,7

Frequeny (Hz) 80 80 80 80 65 65 65 68 68

Engine brand Honda Honda Hatz Hatz Honda Hatz Hatz Honda Honda

Rated power (kW) 4,1 4,1 2,8 2,8 4,8 3,1 3,1 5,8 5,8

Sound power, guaranteed (LwAdB(A) 108 108 108 108 105 108 108 108 108

Sound pressure at operators ear (LpAdB(A) 92 92 92 92 90 90 90 92 92

H/A vibrations, standard handle (m/s2) 1,5 1,5 2,4 2,4 3,5 3,5 3,5 2,4 2,4

Parts number 4700770679 4700770641 4700770680 4700770640 4700770615 4700770616 4700770617 4700770628 4700770681

Op. and Maintenance Manual ID (see below) ILG160-2EN ILG160-2EN ILG160-2EN ILG160-2EN ILG200EN ILG200EN ILG200EN ILG300-2EN ILG300-2EN

Reversible Plates

Important: Full details of measurements are available in the Operation and Maintenance Manuals of the product (see tables above for ID number). They can be found on www.dynapac.com/en/partsandservices/dynadoc/

FORWARD AND REVERSIBLE PLATES

LG400 LG400el.start

CE

LG400el.start

EPAOperating mass (kg) 398 436 436

Centrifugal force (kN) 52 52 52

Speed (m/min) 25 25 25

Plate width (mm) 650 650 650

Amplitude (mm) 1,8 1,8 1,8

Frequeny (Hz) 60 60 60

Engine brand Honda Lombardini Lombardini

Rated power (kW) 7,7 6,2 6,4

Sound power, guaranteed (LwAdB(A) 108 108 -

Sound pressure at operators ear (LpAdB(A) 93,2 94,5 -

H/A vibrations, standard handle (m/s2) 2,5 2,1 2,1

Parts number 4812099002 4812099115 4812099000

Op. and Maintenance Manual ID (see below) ILG400-1EN ILG400-1EN ILG400-1EN

The Dynapac LP8504 roller is suitable for compacting cohesive and granu-lar soils in connection with backfills, foundation work, parking lots and similar applications. With no overhang, they are also well suited for compac-tion work close to obstacles. With the remote control the machine opera-tor can stay out of dusty and noisy trenches where exhaust emissions can be accumulated.Minimum overhang on

both sides due to fully hydraulical design.

Large water tank for fewer refills of water.

Built-in oil cooler to with-stand harsh environments

Powerful engine for reliable operation.

Heavy-duty protecting frame.

Walk behind rollers are suitable for compacting thin layers on granular soils and asphalt. They are mostly used for small jobs, repair work and compaction in narrow areas. Oil-cooling system in world classTo help avoid overheating Dynapac rollers are equipped with controlled oil temperature. This helps reduce unplanned stops thereby increase productivity by offering longer time of operation, longer service intervals and longer lifetime of the machine.

Large water tankTo increase the productivity, the machines are equipped with large watertanks for fewer refills of water. The water tank also serves as protection of the hydraulical components.

Double Drum RollersThe ultimate allrounder

Dynapac LP6500

Dynapac is so much more than just equipment. When our machines are distributed, we include a whole con-cept of service with original parts, support and organized know-how, covering all the needs in the entire field of compaction and paving – on every continent. We have cut down on response times and increased availabil-ity, reliability and distribution speed. For optimum quality, the same engineer who designed the origi-

nal machine also looked after the parts. We have a row of service points around the globe to provide peace of mind. Through the internet, our service points have documentation and parts availability information, updated minute by minute. With the Atlas Copco international network, we are always ready to offer support and assist with parts and ser-vice in order to maintain the highest product quality.

We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, is not guaranteed and contains no warranties of any kind.

www.dynapac.com

Rollers

LP6500 LP6500 electric

start

LP750 LP750 electric

start

LP8504

Operating mass (kg) 696 716 993 1009 1675

Centrifugal force (kN) 21 21 25 25 65

Speed forward / reverse (m/min) 60/38 60/38 60/60 60/60 20,5/20,3

Drum width (mm) 650 650 750 750 850

Amplitude (mm) 0,45 0,45 0,5 0,5 1,1

Frequency (Hz) 61 61 63 63 32

Engine brand Hatz Hatz Hatz Hatz Hatz

Rated power (kW) 6,8 6,8 8,9 8,9 12,5

Sound power, guaranteed (LwAdB(A) 107 107 109 109 106

Sound pressure at operators ear (LpAdB(A) 90 90 90 90 -

H/A vibrations, standard handle (m/s2) 4,3 4,0 4,3 4,3 -

Parts number 4700770570 4700770571 4700770451 4700770454 4812099124

Op. and Maintenance Manual ID (see below) ILP6500-2EN ILP6500-2EN ILP750-2EN ILP750-2EN ILP8500-1EN

Important: Full details of measurements are available in the Operation and Maintenance Manuals of the product (see table above for ID number). They can be found on www.dynapac.com/en/partsand-services/dynadoc/

Dynapac LP750Dynapac LP6500 Dynapac LP8504

3492

000

4 01

6-1

0 ©

Atla

s C

opco

Con

stru

ctio

n To

ols

AB

, Sto

ckho

m, S

wed

en.