Upload
iman-razavi
View
19
Download
0
Embed Size (px)
Citation preview
Page 1
Roman Lang – Januar 2006
Page 2
Roman Lang – Januar 2006
Connector technology in Connector technology in honey comb boards fromhoney comb boards from
Verbindungstechnik in Verbindungstechnik in Wabenplatten Wabenplatten
vonvon
Page 3
Roman Lang – Januar 2006
Warum Leichtbauplatten? – Why leight weight panels?
Substitutionsmaterialien für konventionelle Werkstoffe – Reduzierung der Fertigungskosten Substitute for conventional materials – reduction of the production cost.
Gewichtsreduzierung im Möbelbau. Dadurch ist die Fertigung von grössflächigen und dickeren Möbelelementen realisierbar. – Weight reduction in furniture. Thus the production of extensive a. thicker furniture parts is feasible.
Erweiterte Möglichkeiten im Möbeldesign. Voluminöse Möbel werden händel- u. bezahlbar. Extended possibilities in the furniture design. Voluminous furniture is managable and affordable
Reduzierung von Verpackungskosten durch geringeres Gewicht. Reduction of packing cost due to lower weight.
Page 4
Roman Lang – Januar 2006
Platten aus Hanf, Stroh od. Flachs – Boards made of hemp, straw or flax
Here grows your new leight weight
panel!
Die Qualität der Bohrungen hängt stark von der Dichte der Platte ab. – The quality of the drillings depents onto the density of the board.
Je nach Qualität der Platte werden die folgenden Auszugswerte erzielt: Depending to the quality of the board, the following pull out values can be achieved:
Direkt - direct250 (55)
bis to
550 (121)
Ku.muffe geleimt - plastic dowel glued
350 (77)
bis to
740 (163)
Messingmuffe - brass dowel221 (49)
bis to
760 (168)
Auszugswerte in Newton (lbs) von - bis Pull out values in Newton (lbs) from - to
Schnell nachwachsende Rohstoffe – Fast growing raw materials
Page 5
Roman Lang – Januar 2006
Stäbchenplatten aus Balsa – Bar boards out of balsa
Die Deckschichten können sehr gut gebohrt werden. Probleme treten bei der Kernschicht auf. The cover lay ons can be drilled without problems. Problems occur at the core material.
Minifix direkt Minifix direct
198(44)
Rafix direkt Rafix direct
272(60)
Varianta HC Varianta HC
343(76)
Minifix kann nicht eingesetzt werden, da weder das Gehäuse noch der Bolzen in der weichen Kernschicht halt finden.
Minifix can‘t be used because neither the cam nor the bolt find a hold in the soft core material.
Rafixgehäuse finden guten Halt, jedoch benötigen die Bolzen eine ausreichend dicke Deckschicht um etwas Halt zu finden.
Rafix housings find sufficient hold but the bolt needs an adequate thickness of the cover lay on in order to find some hold
Auszugswerte in Newton (lbs) Pull out values in Newton (lbs)
Die Bolzen überdrehen leicht.
The bolts easily overwind.
Schnell nachwachsende Rohstoffe – Fast growing raw materials
Page 6
Roman Lang – Januar 2006
Weitere Leichtbauplatten – Other leight weight panels
Geschäumte Platten
Foam boards
„Alucore“ Wabenplatten aus Aluminium Honeycore panels out of aluminum
Blähglas, geschäumtes Aluminium od. Monocore (Phenolharzgetränktes Glasfiber sind besonders für den Brandschutz geeignet. „Expanded glass“, foamed aluminium or Monocore (glass fibre with phenolic resin) provide very good fire protection.
Vorwiegend für den Einsatz im Automobil-, Flugzeug- u. Schiffsbau. Auch für Wandpanele im Objekt und Messebau.
Primarily used in the automotive-, aveation-, and shipbuilding industry. Also used for panels in public buildings and trade show booths.
Page 7
Roman Lang – Januar 2006
Nachteile der Leichtbauplatten – Drawbacks of leight weight panels
Alle vorgestellten Leichtbauvarianten weisen deutlich verringerte Festigkeitswerte im Vergleich zu herkömmlichen Holzwerkstoffen auf.
All these introduced panels show significantly lower steadfastness compared to traditional derived timber products.
Preislich liegen alle Varianten zum Teil sehr deutlich über den herkömmlichen Holzwerkstoffen.
In terms of price all types are partly significantly higher compared to traditional derived timber products.
Leichtbauplatten sind bedeutend schwieriger zu bearbeiten.
Light weight panels are significantly harder to process.
Page 8
Roman Lang – Januar 2006
Wabenplatten – Honey comb panels
Setzt jährlich ca. 10 Mill. M² Wabenplattenmaterial für seine Möbel ein. Uses 10 Mill. m² honey comb boards annually for it‘s furniture
Page 9
Roman Lang – Januar 2006
Riegellos – Without rails
Aufbau der Wabenplatten – Construction of honey comb panels
Längsriegel – Rails lengthwise
Längs- u. Querriegel Rails length- a. crosswise
Mehrfachlängen mit Längs- u. Querriegeln Multiple lengths w. rails lenght- a. crosswise
Längsriegel mit dünner Blindkante Rails lenghtwise with thin concealed edge.
Page 10
Roman Lang – Januar 2006
.
.
WabeneinlageHoney comb inlay
DecklagenCover lay on
RiegelRails
Wabenplatte ohne Riegel Honey comb board without rails
Wabenplatte mit Riegel Honey comb board with rails
Noch werden vorwiegend Wabenplatten mit umlaufenden Rahmen (Riegel) eingesetzt. Yet honey comb boards with circulating frames (rails) are being used.
Aufbau der Wabenplatten – Construction of honey comb panels
Page 11
Roman Lang – Januar 2006
Decklagen – Cover lay on
Aus Spanplatte, MDF od HPL Platten in Dicken von 1-10mm Made of particle board, MDF or. HPL boards in thicknesses of 1-10mm
.
.
Wabenplatte ohne Riegel Honey comb board without rails
Wabenplatte mit Riegel Honey comb board with rails
Häfele empfielt die Verwendung von Decklagen aus 5mm Spanplatte
Häfele recommends tó use coverlay ons out of 5mm particle board
Aufbau der Wabenplatten – Construction of honey comb panels
Page 12
Roman Lang – Januar 2006
Wabeneinlage – Honey comb inlay
Aus dünnem Karton (Wabe) od. vertikal aneinander gereihter Wellpappe (stehende Welle). Ermöglichen Plattenstärken von 12 – 120mm Made of thin carton (honey comb) or vertical aligned corrugated card board. Allows panel thicknesses from 12 – 120mm.
.
.
Wabenplatte ohne Riegel Honey comb board without rails
Wabenplatte mit Riegel Honey comb board with rails
Aufbau der Wabenplatten – Construction of honey comb panels
Page 13
Roman Lang – Januar 2006
Hexagon Wabeneinlage – Hexagon honey comb inlay
Die Endloswabe ist in Stärken von 10 bis 100mm verfügbar. Sie wird auf Paletten platzsparend verpackt, so dass sich ca. 2.500m² auf einer Palette transportieren lassen. The endless honey comb core is avaiable in thicknesses from 3/8“ to 4“. It is stored space saving on a pallette so that around 25,000 ft² can be transported on one palette
Die Waben werden mit einer Papierfeuchte von ca. 12-15% beim Kunden angeliefert und wird dann in einem Trockenofen expandiert und auf 3% herunter getrocknet. The honey comb is delivered with a paper humidity of approx. 12-15%. In an expander / dryer the honey comb is being expanded and dryed down to 3%.
Page 14
Roman Lang – Januar 2006
Wellstegeinlage - carton inlay
Werden in Formaten bis 3050mm Länge u. 1250mm Breite geliefert. Die Stärke kann beliebig zwischen 6-95mm gewählt werden. Die Zellgrösse beträgt ca. 5mm. Are available in formats up to 120“ length and 49“ width. The thickness can be choosen from ¼“ to 4“. The size of a cell amounts around 3/16“.
Wellstegeinlagen bieten auf Grund ihrer kleinen Zellgrösse eine relativ hohe Biege u. Druckfestigkeit. Due to the small cell size, carton inlay provide a relatively high bending strength and pressure resistance.
Page 15
Roman Lang – Januar 2006
Riegel – Rails
Aus Massivholz (Fichte), Spanplatte oder MDF. Erleichtern das Aufbringen von Kanten u. das Anbringen von Beschlägen. Unterstützt die Druckfestigkeit der Wabe. Made of solid wood (pine), particle board or MDF board. Ease the edge banding process as well as the installation of hardware. Support the pressure resistance of the honey comb.
.
.
Wabenplatte ohne Riegel Honey comb board without rails
Wabenplatte mit Riegel Honey comb board with rails
Aufbau der Wabenplatten – Construction of honey comb panels
Page 16
Roman Lang – Januar 2006
Wird in gängigen Plattenformaten geliefert und kann wie eine Spanplatte beliebig aufgetrennt werden. Is supplied in common panel formats and can be divided user defined like a particle board.
.
.
Wabenplatte ohne Riegel Honey comb board without rails
Wabenplatte mit Riegel Honey comb board with rails
Durch die eingebrachten Riegel sind die Plattenmasse vorgegeben. Dadurch verringert sich die Flexibilität. Due to the rails the format of the panel is pre-determined. Thus flexibility is limeted
Aufbau der Wabenplatten – Construction of honey comb panels
Page 17
Roman Lang – Januar 2006
Produktion der Wabenplatten – Production of honey comb panels
Page 18
Roman Lang – Januar 2006
Produktion der Wabenplatten – Production of honey comb panels
Page 19
Roman Lang – Januar 2006
Produktion der Wabenplatten – Production of honey comb panels
Page 20
Roman Lang – Januar 2006
Produktion der Wabenplatten – Production of honey comb panels
Page 21
Roman Lang – Januar 2006
Produktion der Wabenplatten – Production of honey comb panels
Einlegen Riegelelemente und Wabe durch Bediener Inserting the rails and honey comb by operator3. Beleimung der Mittellage mit sofortigen Rücklauf
Adding glue onto intermediate ply with immediate rewind 4.
Auflegen des Oberdecks durch Bediener Placing the upper cover lay on by operator5. Verpressen im Kalander
Pressing the parts in the calender6.
Beleimung Unterdeck mit sofortigen Rücklauf Adding glue onto lower lay on with immediate rewind2.
Auflegen des Unterdecks durch Bediener Placing the lower cover lay on by operator1.
Auftragseinheit Glueing station
Presskalander Press calender
Page 22
Roman Lang – Januar 2006
Produktion der Wabenplatten – Production of honey comb panels
Variante eines semiautomatischen Durchlaufs Version of a semi-automatic production cycle
Page 23
Roman Lang – Januar 2006
Blindkante – Concealed edge
Kantenbearbeitung – Edge processing
Blindkante – Concealed edge
Page 24
Roman Lang – Januar 2006
Kantenbearbeitung – Edge processing
Blindkante – Concealed edge
Blindkante – Concealed edge
Dekorkante – Dekorative edge
Page 25
Roman Lang – Januar 2006
Blindkante – Concealed edge
Kantenbearbeitung – Edge processing
Page 26
Roman Lang – Januar 2006
Hauptaugenmerk – Main Focus
Einsatz von Wabenplattenverbindern ohne zusätzlichen Aufwand für den Möbelproduzenten oder Endverbraucher. Using connectors for honey comb boards by avoiding additional expenses for the furniture producer or the end consumer.
Page 27
Roman Lang – Januar 2006
Dicke der Deckplatte ≥ 5mm Thickness of cover lay on ≥ 5mm
Material der Deckplatte aus Spanplatte → höhere Ausreisswerte
Cover lay on made of particle board → higher pull out values
Wabeneinlage → ohne Einfluss Honey comb inlay → no impact
Anforderungen an die Wabenplatte Requirements to the honey comb board
für Wabenplatte ohne Riegel For honey comb boards without rails.
Momentaner Status – Current status
Page 28
Roman Lang – Januar 2006
Die Varianta HC Schraube – The Variante HC screw
Für Bohrung 3mm od. 5mm Art. Nr.013.30.900 / 013.30.310 For drilling 3mm or 5mm Art. No. 013.30.900 / 013.30.310
Auszugskraft auseiner D=3mm BohrungPullout force by a 3mm drilling
Deckschicht Cover lay on 3mm
Newton (lbs)
Deckschicht Cover lay on 4mm
Newton (lbs)
Deckschicht Cover lay on 5mm
Newton (lbs)
Deckschicht Cover lay on 6mm
Newton (lbs)
Spanpl. 16mmParticle board 16mm
Newton (lbs)
Varianta- HC5,5x12,5mm Art.Nr. 013.30.900
218 (48) 247 (54) 349 (77) 464 (102) 626 (138)
Varianta-Standard 4,2x16mmArt.Nr. 013.15.635
140 (31) 184 (41) 289 (64) 332 (73) 576 (127)
Hospa4,0x25mmArt.Nr. 015.31.853
204 (45) 203 (45) 285 (63) 380 (84) 420 (93)
Verfügbare Serienteile – Available serial parts
Page 29
Roman Lang – Januar 2006
Auszugswerte - Pull out values
0
100
200
300
400
500
600
700
3mm 4mm 5mm 6mm 16mm
Decklage - Cover lay on
Varianta HC
Varianta
Hospa
Verfügbare Serienteile – Available serial parts
Die Varianta HC Schraube – The Variante HC screw
Page 30
Roman Lang – Januar 2006
Weitere Vorteile einer 5mm Deckplatte Additional advantages of a 5mm cover lay on
Direkte Montage der Beschläge ohne dem Einsatz von Dübeln möglich
Allows direct installation of the fittings without dowels
Beschläge sind frei positionierbar Free positioning of various fittings
Kanten können direkt aufgefahren werden
Direct edge banding possible
3mm Lochreihe realisierbar 3mm system holes are possible
Weitmaschigere Wabe möglichWider coarsed honey comb inlays can be used
Anforderungen an die Wabenplatte Requirements to the honey comb board
Page 31
Roman Lang – Januar 2006
Möbelteile können seitlich als auch von oben zusammengefügt werden Furniture parts can be assembled sideways or „drop in“
Mehr Flexibilität beim Konstruieren u. Zusammenbau der Möbel More flexibility by designing and assembling the furniture
F e a t u r e B e n e f i t
Studie – Study
Für Wabenplatten ohne Riegel – For honey comb boards without rails
Rafix 20 HC
Page 32
Roman Lang – Januar 2006
Gehäuse kann von Hand eingedrückt werden Cam can be inserted by hand
Keine Werkzeuge zum Einpressen d. Beschlags erforderlich No tools required for the insertion of the fitting
Keine Kantenbohrung notwendig
No edge boring required
Erlaubt schnelleren Durchlauf bei der Produktion Allows faster flow through the production lines
Verfügbare Serienteile – Available serial parts
Tab 20 HC
Für Wabenplatten ohne Riegel – For honey comb boards without rails
F e a t u r e B e n e f i t
Page 33
Roman Lang – Januar 2006
Verfügbare Serienteile – Available serial parts
Tab 20 HC
Für Wabenplatten ohne Riegel – For honey comb boards without rails
F e a t u r e B e n e f i t
Anzugselement erlaubt einen Anzugsweg von bis zu 1,5mm. Tightening element allows a travell of up to 1,5mm.
Bohrtoleranzen werden ausgeglichen Compensates drilling tolerances are
Hohe Winkelstabilität Seitenwand wird an Boden gezogen. High corner stability Side panel is pulled to the cross member
Bewährte Tab V Technik
Matured Tab V technique
Page 34
Roman Lang – Januar 2006