LIGHTING YOUR WAY, GUARDING YOUR PATH

WWW.AMEERI .COM.BH

L I G H T I N G Y O U R W A Y, G U A R D I N G Y O U R P A T H

WWW.AMEERI .COM.BH

INTRODUCTIONFor over 60 Years Ameeri have been supplying and for more than 25 years Ameeri Indus-tries have been manufacturing to various projects and prestigious clients throughout the Arabian Gulf, earning great trust of our respected clients by maintaining our focus on quali-ty and safety.

Since the beginning we have set a goal to never stop as far as improvements for better qual-ity and safety.

With that goal in mind and the dedication of our professional workforce, Ameeri have man-aged to enclose continues success in various field (electrical, mechanical and trading). Ameeri’s name has always been linked with greater quality, service and safety.

With our belief to constantly expand and improve Ameeri is focusing on various internation-al markets as well as the local markets. As we are proud to be the sole manufacturers of Road crash barriers and street light poles in the Kingdom of Bahrain, we are also aiming to be the main export leaders in the Kingdom of Bahrain as well, holding high our country and family name.

With the virtues of our culture and the belief of fair trade at Ameeri we guarantee that you will always be the prime of our concerns. We guarantee to offer the best, by the best, to the best.

Amgard is ISO Certified, a member of European Union Road Federa-tion and member of IRF and Galvanization association of U.K. Its

approved and certified for the design calculations by the third party Certification body by M/S Bureau Veritas.

1

WWW.AMEERI .COM.BHWWW.AMEERI .COM.BH

Amgard have the largest hot dip galvanizing plant in Bahrain, having european made 12.5 mtr long x 1.5 mtr wide x 2.5 mtr deep galvanizing kettle and with the large size pre-treat-ment plant including automatic shot blasting plant.

Undertaking the supply and installation of its products wherever necessary with its Civil works team (Quality Contracting). Its carrying out the maintenance works for RPMD if required and carrying out the repairing works on the Road Guard Rails whenever and wher-ever required in Kingdom Of Bahrain with well experienced team.

PRODUCTS AND SERVICES2

BUILDING SECTOR

Substation DoorsFire Rated Steel DoorsFire Exit Steel DoorsFire Rated Special Doors(Customize Doors)Louvers (Type B & Type C)Special LouversSteel Lintels

········

········

···

ROAD SECTOR

Street Light PolesTraffic Signal PolesCantilever Signal PolesCamera PolesFlag PolesSpecial / Decorative PolesSafety Barriers/ Road GuardRails, Bridge Parapet, Fences

OUR SERVICES

Galvanizing Of MaterialInstallation Of MaterialMechanical FabricationWorks

All Products are manufactured by experienced technical team with latest advanced Machineries.

Products meet BS / EN / AASHTO standards.


LIGHT POLES3

Poles meet International Standards (BS EN) for heavy duty Mild Steel Hot Dip Galvanized light Poles with an appropriate thickness that can withstand very hot and humid climate.

Poles are designed to meet maximum loading using Bracket Configuration to with stand a wind speed of 160 km/hr.

Specialises in the fabrication and supply of quality lighting poles and other products. In particular, we have built our reputation on being able to supply a range of steel poles and column to specific needs such as:

Design load and calculation are based on BS En 40 Series meeting Dead loads.

Manufacturing Standards: BS EN 40 - 2:2004 Lighting columns. General require ments and dimensions.

BS EN 40 -3-1:2000 Lighting columns. Design and verification Specification for characteristic loads.

BS EN 40-3-2:2000 Lighting columns. Design and verification. verification by testing.

BS EN 40 - 3:2003 Lighting columns. Designing and verification. Verfication by calculation.

Steel Light Poles above 12 Metre joined by telescopic slip joint.

Street Light PolesFlood Lighting PolesTraffic Signal PolesCantilever Signal PolesCamera Poles, Flag PolesSpecial / Decorative Poles

••••••


OCTAGONAL POLES4

WWW.AMEERI .COM.BHWWW.AMEERI .COM.BHWWW.AMEERI .COM.BH

OCTAGONAL POLES5


ROOTED OCTAGONAL POLES6


CONICAL POLES7


CONICAL POLES8


ROOTED CONICAL POLES9


TUBULAR POLES10

ANCHORBOLT SIZE

Q X P


TUBULAR POLES11

AIMS TO PRODUCE THE HIGH QUALITY POLES BY CONSIDERING THE CUSTOMERS REQUIREMENT AS A BASIC MISSION.

CARRIES ITS METICULOUS STUDIES WITH RESPECT TO DESIGNING ' FLOOD LIGHT POLES ' TO MANY CLIENTS IN BAHRAIN & GCC COUNTRIES-RANGING TO ACCOMMODATED 400W TO 1500W FLOOD LIGHT FITTINGS.

CAMERA POLES


FLAG POLES12


CANTILEVER SIGNAL POLES13

CODE No.Of Holding Signals

Cantilever Arm

AM/CLSP - 001 1 SINGLEAM/CLSP - 002 2 SINGLEAM/CLSP - 003 3 SINGLEAM/CLSP - 004 4 SINGLEAM/CLSP - 005 5 SINGLEAM/CLSP - 006 2 DOUBLEAM/CLSP - 007 4 DOUBLE

cantilever beams those are made below 12 metre are made of one segment, and above 12 metre are of two segments. Shapes of octagonal & polygonal are commonly used.

Design loads and calculations are based on BS EN 40 series .The nominal height 8.5 metre with a design wind speed is 160 km/hr.

Design calculations are set to make sure all the standards are maintained. These very functional design poles are strong enough to support a variety of signal head and traffic sign combinations at length of more than 19.5 metre. We offer a wide sizes of cantilever

Traffic Poles are used to carry the Traffic Signal lights. It consists of a vertical column and cantilever beam with varied length as per number of carriage ways.

SINGLE SIDED DOUBLE SIGNAL HEAD HOLDING CANTILEVER POLE

Single Sided Five Signal Head Holding Cantilever Pole

Double Sided Four Signal Head Holding cantilever Signal pole

CNC Tandem Press Brake

Single Sided Triple Signal Head Holding Cantilever Signal Pole


HIGHWAY SAFETY FENCES14

Amgard Safety Fences Products are manufactured by using the latest technique of continu-ous forming systems. The corrugated safety guard rails are the most widely used type of guard rails to reduce life risks / damages on road accidents.

High way Safety Fence meets International Standards BS EN 6579 Part 1,5,6,7 accordingly our ranges including:

Tensioned Corrugated Safety Fence (TCB)

TCB Absorbs impact by deflecting as a whole and helps the vehicle to decelerate, and at the same time guide it back towards the carriageway in a gradual and controlled manner. Tensioned Corrugated beam is normaly not used on curves with raduis less than 120m.

There is no maximum installation length for TCB, but the approch/departure end, must be anchored at ground level with heavy duty End Posts or to full height anchors.

The Tensioner units consist of two M24 Bolts installed in special steel brackets fitted in to the rear corrugations of the main beam elements.

This tensioning kit units are located at 70M intervals along the length of the Barrier.

Tensioned Corrugated Safety Fence (TCB) Untentioned Corrugated Safety Fence (UCB)

Open Box Beam Safety Fence (OBB)

HIGH WAY SAFETY FENCES


HIGHWAY SAFETY FENCES - TCB

TCB Tensioning

Installed at Drydock Highway

Installed at Zallaq Highway

Installed at Sh. Zayed Highway

Guard Rail Forming Machine

Guard RaiIs Installed at King Hamad High way (Durrat Al Bahrain)

Superior quality and approved grade mild steel is used to manufacture these Guard Rails and accessories, undergoing hot dip Galvanizing process after fabrication which also meets the international standard.

15


16

HIGHWAY SAFETY FENCES - UCB

Traffic Face Curve beam (Concave)

Traffic Face Curve beam (Convex)

Installed at BBMI Sitra

Installed at Riffa Avenue

Fish tail - Type AInstalled at Al Fateh Highway

Installed near Avenue 13-Tubli

Speed Situations mainly on slip roads and round-abouts for protecting at werges as they can be used on sharper curves than the tensioned safety fences.Un tensioned Corrugated fence has been used for road bends where the radius is tighter than usual. Un tensioned corrugated systems do not use tensioning devices which means that they can follow smaller radius curves in the road layout.

Amgard can Manufacture and supply all non - Propri-etery untensioned corrugated beam components to highway agency design drawings. All fasteners and other accessories components can be supplied. If special components are required then Amgard can manufacture this for our customers.


HIGHWAY SAFETY FENCES - UCB17

(Installed at King Hamad Highway-Durrat Al Bahrain)

A

A

Installed at Zallaq highway near Sakkir AirportInstalled at Avenue 13 - Tubli

Full Height Anchorage PostT.C.B to U.C.B Transition


18

HIGHWAY SAFETY FENCES - OBB

Amgard Open Box Beam Safety Fences

Open Box Beam is also suitable for use at the road edge or in the central reservation of motorways or high speed roads. The strength of the fence lies in the section of the rails, which are normally supplied in 4.8m and 2.4m lengths. These are connected together by fishplates which match the profile of the rail and fixed inside, bridging adjoining beams.

There is no limitation on the length of run which can be installed, but both ends should be

Due to the rigid nature of OBB some allowance must be made for the effects of temperature change, therefore a special expansion assembly must be fitted every 100m.

Heavier duty ‘Z’ section posts are used for mounting OBB in double height format (DROBB), where a potential hazard exsits for vehicles which requires high containment level.

anchored at ground level to strong SHS posts, or to full height anchor frames.

Amgard

Open Box Beam is also suitable for use at the road edge or in the central reservation of motorways or high speed roads. The strength of the fence lies in the section of the rails, which are normally supplied in 4.8m and 2.4m lengths. These are connected together by fishplates which match the profile of the rail and fixed inside, bridging adjoining beams.

There is no limitation on the length of run which can be installed, but both ends should be

anchored at ground level to strong SHS posts, or to full height anchor frames.

Installed at Al Muasker HighwayDouble Sided Single Height OBB Safety Fence

Installed at Al-Muasker HighwaySingle Sided Double Height OBB Safety Fence

Installed at SH. Khalifa Bin Salman park-Hidd

OBB Safety Fence Near Cantilever Signal Pole


High grade mild steel of required thickness used to manufacture Amgard Open Box Beam and its accessories through systematic bending and hot dip Galvanizing after fabrication according to international standards.

HIGHWAY SAFETY FENCES - OBB19

High grade mild steel of required thickness used

Installed at Rumatha Palace

Installed at Al Muasker Highway

Installed at Dry Dock Highway

Installed at Sh. Salman Highway

Installed at Um Al Saad Avenue


20

FORMULA 1 SAFETY FENCES

Three way Guard Rails system are manufactured and Hot Dip Galvanized by meeting Tilke Standards and won approvals from Ministries, Leading Consul-tants and Clients and installed at mentioned, below two circuits.

Three way Guard Rails system are manufactured and Hot Dip Galvanized by meeting Tilke Standards and won approvals from Ministries, Leading Consultants and Clients and installed at mentioned, below two circuits.

BAHRAIN FORMULA-1 (BAHRAIN INTERNATIONAL CIRCUIT) (Manufactured, supplied and installed by AMGARD.

YAS MARINA CIRCUIT - FORMULA-1 at ABU DHABI, UAE (AMGARD manufactured & supplied)

BAHRAIN FORMULA-1 (BAHRAIN INTERNATIONAL CIRCUIT) (Manufactured, supplied and installed by AMGARD.

YAS MARINA CIRCUIT - FORMULA-1 at ABU DHABI, UAE (AMGARD manufactured & supplied)


BRIDGE PARAPETS21

Test Type : Road Restraint System - TB81Target Impact Speed : 65km/h, Target Impact angle : 20˚Target Vehicle Mass : 38000 kg.Each Post has been anchored to the ground with 4nos of M20 Bolts Grade 8,8,Total Length of Test item 72mHeight of the Test item in the Impact Area 1.2mPost Spacing 2m, Preload in the Anchorages 20kN

Designed, developed and numerical Stimulation Carried out GD TECH Belgium and Certified by TRL Bridge Parapet (H4b)

TEST STANDARD EN - 1317 Part 1&2 Vehicle Impact test TB81

BEFORE TEST

AFTER TEST

During and after the impact, no more than Yesone wheel of the vehicle passes over the rearmost part of the deformed system

Vehicle rolls over during the test No

Vehicle within exit box Yes

Impact test acceptance criteria


AMGARD Bridge Parapets are designed to provide High level of Containment that limit penetration of errant vehi-cles & redirectingvehicles on to a path as close as possible to the parpet.

It is a four rail system having different cross section, the main advantage of this parapet is that there is protection for both High containment Vehicle as well as low contain-ment vehicles, the bottom level of the rail is connected to a special type of spacer & corrugated beam so to provide protection of two wheeler vehicle also, this product is one of a kind in the history of parapet design.

AMGARD is Committed to customer satisfacion at the highest level and welcomes the opportunity to contribute its expertise.

Bridge parapet confirm European Standard EN 1317

Focus on the performance of a product. Workmanship standards and quality controls

APPLICATIONSH4b Vehicle Restrain system are designed for Bridge Deck and Special Roads

ACHIEVEMENTH4b Parapets has Undergone Series of Test in Accor-dance to EN 1317 - 2 for High Containment Level of H4b

PRODUCT SPECIFICATIONBS - EN1317 Vehicle Restraint SystemBS - EN 1461 Hot Dip GalvaniziationMinimum Coating Thickness of 610 gram / Sq.Metre

22

BRIDGE PARAPETS

Installed at UM - Al Hassam interchange

‘‘ Low maintenance with long life expectancy”


AMGARD manufacture and maintain different types of pedestrian fences according to requirements.

All fences are hot dip galvanized after fabrication. Finish coat of required colour paint can be applied

after galvanizing.

PEDESTRIAN FENCES22


All Signal Light Poles and Barriers are hot dip Galvanized after fabrication. Finish coat of required colour paint applied after galvanizing.

All vents and grill are hot dip galvanized after fabrication. Finish coat of required colour paint

applied after galvanizing.

23

TRAFFIC SIGNAL LIGHT POLE & BARRIER

INDUSTRIAL VENT & VENT GRILL


Fire doors are designed to be fully flush without any joints or welding marks on the surface of the door. The fire rated steel door come in single leaf, double leaf and triple leaf. Steel reinforcement is provided for structural stability and integrity.

Doors & frames are designed to withstand for the most demanding environment. These fire doors are un insulated in nature. To increase the insula-tion, infill will be added. This will also increase the acoustic capability of the door.

Fire Doors are designed to withstand 2 hour fire rating. Installed in compartments to separate different zones. Areas which usually use steel doors are substations, shopping complexes, offices and factories. These doors are being tested and approved by world-renowned fire testing laboratory.

DOOR LEAVESSingle and double leaf fire doors are manufactured from minimum 1.5mm & 2mm thick galva-nized steel plates. These are then finished by Powder coating.

DOOR FRAMESThe fire steel door frames are constructed from 2mm & 3mm galvanizing steel plates. All frame assembly have mitered joint and butted assembly, our frames are supplied in knock down form for easy assembling at site. The standard frame profile will be single & double Rebate welded frames supplied on special request.

These steel Doors & Frames are manufacturedby advanced technology using modern Computerized Machines

24

FIRE RATED STEEL DOOR


AMGARD is having state of the art facility of Automatic Shot Blasting for Ferrous Metals using fine steel grits to get perfect cleaning with uniform finish keeping

ready for final coats of paint or galvanizing.

25

SHOT BLASTING

HOT DIP GALVANIZINGBlast Room - Size 7650 (L) × 2900 (W) × 2750MM (H)

• 12.5 mtr Long × 1.5 mtr wide × 2.5 mtr deep galvanizing kettle• 6 mtr Long × 1.2 mtr wide × 2 mtr deep galvanizing kettle• 12 mtr Long × 1.5 mtr wide × 2 mtr deep pickling (treatment) tanks


26

CERTIFICATES


27

CERTIFICATES


28

CERTIFICATES


Committed to grow and to extend best service Locally and

internationally

Meeting the latest international standards

Approved by Ministries, Consultants and Clients

Growing with day to day technology to offering the best to

valuable customers

Exceptional Performance to provide high quality products based

on international standards

Focus on safety and Quality

Amgard is also manufacturing many custom made mechanical works liketelephone towers, steel platforms & purling for Car Parking (Solar Panal System Fixing) etc.

- brand products as stated in this catalogue

- brand Switchgears, G.I. Cable Trays & Trunking

- brand Light Fittings

- Offering Electrical and Mechanical Materials

- Grade :1 Electricity and Water Authority License holder to carry out unlimited Electrical load installation works of HV and LV.

Electro - Mechanical & Civil Contractors

ذ.م.م

AMEERI GROUP OF COMPANIES

AMGARD

AskarFactory 1945, Road 5146Askar – 951Tel: +973 17 830 800Fax: +973 17 830 811

Email:[email protected]@ameeri.com.bh

Documents

LIGHTING YOUR WAY, GUARDING YOUR PATH