Liimaus ja tiivistäminen binder2

2. Adhesives and sealants

Al-Fil Filler AFI 3Al-Fix AFX 4Al-Fix Aktivator AFA 5Al-Fix Aktivator SF AFA SF 6Al-Fix Black AFB 7Al-Fix Flexible AFF 8Al-Fix Gel AFG 9Al-Fix Remover AFR 10B1 Foam B1 F 11Carseal Spray CSS 12Duofix DFX 13Megaplast MM MMM 14Megaplast PPE MPE 15Megaplast PU 25s MPU25s 16Megaplast PU 90s MPU90s 17Multifix MFX 18Nova Power Grip 401 2-K NPG1 19Nova Power Grip 403 - 403 2-K NPG3 20Nova Power Grip 406 NPG6 21Nova Power Grip 409 - 409 2-K NPG9 22Nova Titan Stick NTS 23Nova Wet Stick NWS 24Novabond 2 NB2 25Novalok Aktivator NLKA 26Novalok C NLKC 27Novalok M NLKM 28Novalok SF NLKS 29Novaroof NRF 30Novaseal NSL 31PH Butyl PHB 32PU Construct PUC 33PU Construct Trans PUT 34Q-Fix 120 QIX 35Seal & Bond MS Screen Plus SMS+ 36Seal & Bond Flex-Sil SBF 37Seal & Bond Flex-Sil S SBFS 38Seal & Bond MS 18 MS18 39Seal & Bond MS 40 ALU MS40

Alu40

Seal & Bond MS 40 Trans MS40Trans

41

Seal & Bond MS 50 2-K MS50 2-K

42

Seal & Bond MS 60 SBD 43Seal & Bond MS Construct SBC 45Seal & Bond MS Screen SMS 46Seal & Bond MS32 Isolation MS32 47

www.novatio.com 2.1

2.Adhesives and sealants

Seal & Bond Sealtrans STS 48Seal & Bond Sil 25 SIL25 49Seal & Bond Spray SBS 50Seal & Bond Sticky Seal SSS 51Silfix SIX 52Tire Sealant TRS 53Transfix TIX 54Trimfix TFX 55Trimfix PS TFX PS 56Trimfix WT TFX-WT 57

2.2 www.novatio.com


Al-Fil Filler AFI

FILLER FOR AL-FIX GLUES

• To obtain an easy volume for the use

of Al-Fix glues.

• To fill damages and bondings where a

gap/opening between the materials is

required.

• Easy to use cutaneous powder is al

flask.

General information

AL-FIX FILLER is an adhesive which bonds inseconds and has a special formula based onCyanacrylate.AL-FIX FILLER is a one component adhesivewhich is solventless and consists mainly ofAthyl Cyanacrylate Monomer.AL-FIX FILLER is temperature resistant in therange from -30°C to +100°C.

AL-FIX FILLER is resistant to solvents, oils,benzene, temperature fluctuations andatmospheric conditions.AL-FIX FILLER joints have a high tensileshear strength and show no shrinkage.

Applications and use

• AL-FIX FILLER provides an exceptionallystrong bond between almost all kinds ofmaterials, with the exception of polyethylene,polypropylene and fluorine containingmaterials. Materials which can be bondedwith AL-FIX FILLER: ABS, aluminium,bakelite, bronze, buthyl, celluloid,chloroprene, chrome, delrin, glass, copper,natural rubber, NBR, neoprene, nitril, nylon,phenol, polycarbonate , polystyrene,porcelain, hard pvc, stainless steel.

• on porous materials we recommend usingAL-FIX AKTIVATOR OR AL-FIX AKTIVATORSF.

Product references

Article nr Name Content Section

501100000 Al-Fix Filler 20 ml Adhesives and sealants

V0.0 www.novatio.com 2.3


Al-Fix AFX

SUPER FAST, COLOURLESS GLUEFOR TRANSPARANT GLUE SEAMS

• Based on cyanacrylate.

• Bonds in seconds.

• No heating - no soldering - no mixing.

• High tensile shear strength - shows

no shrinkage.

• Very economical - the thinner the

adhesive, the stronger the joint.

General information

AL-FIX is an adhesive which bonds inseconds and has a special formula based onCyanacrylate.AL-FIX is a one component adhesive which issolventless and consists mainly of AthylCyanacrylate Monomer.AL-FIX is temperature resistant in the rangefrom -30°C to +100°C.

AL-FIX is resistant to solvents, oils, benzene,temperature fluctuations and atmosphericconditions.AL-FIX joints have a high tensile shearstrength and show no shrinkage.

Technical information and packaging

Colour: crystal clearViscosity mPa's Brookfield 20°C: 100-120Specific gravity gr/cm² 20°C: 1.06Flashpoint DIN 55213 in °C: 87Initial hardening on alu in sec. at 23°C 50%n.v.: 30-60

on Nora Rubber: 3-20on hard PVC: 10-60Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• AL-FIX provides an exceptionally strongbond between almost all kinds of materials,with the exception of polyethylene,polypropylene and fluorine containingmaterials. Materials which can be bondedwith AL-FIX: ABS, aluminium, bakelite,bronze, buthyl, celluloid, chloroprene,chrome, delrin, glass, copper, natural rubber,NBR, neoprene, nitril, nylon, phenol,polycarbonate , polystyrene, porcelain, hardpvc, stainless steel.


Product references


501003000 Al-Fix 20 ml Adhesives and sealants


501101000 Al-Fix Aktivator 150 ml Adhesives and sealants

501111000 Al-Fix Aktivator SF 150 ml Adhesives and sealants

2.4 www.novatio.com V0.0


Al-Fix Aktivator AFA

Activates the Al-Fix glues

• Fastens the curing time of the Al-fix

glues.

• Makes adhesion possible on porous

materials such as wood.

• To be used on Al-Fix Gel.

General information

AL-FIX AKTIVATOR is an adhesive whichbonds in seconds and has a special formulabased on Cyanacrylate.AL-FIX AKTIVATOR is a one componentadhesive which is solventless and consistsmainly of Athyl Cyanacrylate Monomer.AL-FIX AKTIVATOR is temperature resistantin the range from -30°C to +100°C.

AL-FIX AKTIVATOR is resistant to solvents,oils, benzene, temperature fluctuations andatmospheric conditions.AL-FIX AKTIVATOR joints have a high tensileshear strength and show no shrinkage.


• AL-FIX AKTIVATOR provides anexceptionally strong bond between almost allkinds of materials, with the exception ofpolyethylene, polypropylene and fluorinecontaining materials. Materials which can bebonded with AL-FIX AKTIVATOR: ABS,aluminium, bakelite, bronze, buthyl, celluloid,chloroprene, chrome, delrin, glass, copper,natural rubber, NBR, neoprene, nitril, nylon,phenol, polycarbonate , polystyrene,porcelain, hard pvc, stainless steel.


Product references





Al-Fix Aktivator SF AFA SF

Super fast activation of ht Al-Fix glues

• Fastens the curing time of the Al-fix

glues.

• Makes adhesion possible on porous

materials such as wood.

• Ideal combination with Al-Fix Gel.

General information

AL-FIX AKTIVATOR SF is an adhesive whichbonds in seconds and has a special formulabased on Cyanacrylate.AL-FIX AKTIVATOR SF is a one componentadhesive which is solventless and consistsmainly of Athyl Cyanacrylate Monomer.AL-FIX AKTIVATOR SF is temperatureresistant in the range from -30°C to +100°C.

AL-FIX AKTIVATOR SF is resistant tosolvents, oils, benzene, temperaturefluctuations and atmospheric conditions.AL-FIX AKTIVATOR SF joints have a hightensile shear strength and show noshrinkage.AL-FIX AKTIVATOR SF fastens the curingtime remarkable which can cause whiteoutlines.


• AL-FIX AKTIVATOR SF provides anexceptionally strong bond between almost allkinds of materials, with the exception ofpolyethylene, polypropylene and fluorinecontaining materials. Materials which can bebonded with AL-FIX AKTIVATOR SF: ABS,aluminium, bakelite, bronze, buthyl, celluloid,chloroprene, chrome, delrin, glass, copper,natural rubber, NBR, neoprene, nitril, nylon,phenol, polycarbonate , polystyrene,porcelain, hard pvc, stainless steel.


Product references





Al-Fix Black AFB

FAST BLACK GLUE WITH HIGHELASTICITY

• Extremely suitable for gluing elastic

materials in combination with hard

materials.

• Temperature resistance from -50°C to

+135°C (peak of 180°C!).

• Excellent chemical and moisture

resistant.

• Economical in use.

• Very high tensile strength > 60N/cm².

• AL-FIX ACTIVATOR accelerates the

curing.

• Moisture, shock, sliding and impact

resistant.

General information

AL-FIX BLACK is a black cyanacrylate thathas an extremely good adhesion on mostmaterials and that remains elastic aftercuring.

AL-FIX BLACK is resistant to solvents, oils,benzene, high and low temperaturefluctuations.AL-FIX BLACK is moisture resistant.


Colour: black.Viscosity Mpa's Brookfield 20°C: 2000-3000.Viscosity Mpa's 1 dynamic: -20000 at 25°C.Boiling point >200°C.Flash point DIN 51758: 87°C.Specific gravity gr/cm: 1,05-1,09.Solubility in water: practically insoluble.Shock and impact resistant.AL-FIX-BLACK is ideal for applications that

come into regular contact with moisture andis permanent elastic after curing.Temperature resistance: -50°C to +135°C(peak +180°C).Resistant to long-term moisture.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• ideal for metal and rubber bonds• for rapid bonding of natural and syntheticrubbers, plastics, metals, etc.• bonding rubbers, plastics that areconfronted with high temperature fluctuationsand moistureAL-FIX BLACK makes strong bondingpossible between most varied materials, withthe exception of polyethylene, polypropylene,silicone and fluorine and items containingplastic materials.Materials that can be glued with AL-FIX

BLACK: ABS, aluminium, bakelite, bronze,buthyl, celluloid, chloroprene, chrome, delrin,glass, copper, natural rubber, NBR,Neoprene, nitrile, nylon, phenol,polycarbonate, polystyrene, porcelain, hardpvc, stainless steel, steel.For porous materials : use AL-FIXAKTIVATOR or AL-FIX AKTIVATOR SF.The use of AL-FIX AKTIVATOR can lead to agreater shrinkage of the adhesive seam aswell as possibly lower flexibility.

Product references


501303000 Al-Fix Black 20 ml Adhesives and sealants





Al-Fix Flexible AFF

FAST FLEXIBLE GLUE FORTRANSPARENT GLUE SEAMS

• Extremely suitable for elastic

materials.

• Flexible bonding, with prolonged

working time.


+140°C.

• Excellent chemical and moisture

resistant.


• Very high tensile strength > 60N/cm².

• AL-FIX AKTIVATOR accelerates the

curing.

• Moisture, shock, sliding and impact

resistant.

General information

AL-FIX FLEXIBLE is a transparent and flexiblecyanacrylate that has extremely goodadhesive strength on most materials and isslightly elastic after curing.AL-FIX FLEXIBLE is resistant againstsolvents, oil, benzene, high and lowtemperature fluctuations.

AL-FIX FLEXIBLE is ideal for applications thatcome into regular contact with moisture.


Colour: matt, transparant.Viscosity at 25°C: 2500-3500 mPa.s.Density: 1,06 g/m.Flashpoint: 85°C.Tensile strength on NBR: 62 N/cm².# = material breakageShear strength on steel: 28 N/mm².

Temperature range: -55°C to +140°C.Soluble in: acetone, nitromethane,ethylacetate.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• ideal for metal and rubber joints• for fast adhesion of natural and artificialrubbers, plastics, metals,...• to glue rubbers and plastics that are facedwith higher temperature fluctuations andmoistureAL-FIX FLEXIBLE makes strong adhesionpossible between very diverse materials withthe exeption of polyethylene, polypropylene,silicone and fluorine. Materials that can beglued with AL-FIX FLEXIBLE: ABS,aluminium, bakelite, bronze, buthyl, celluloid,

chloroprene, chromium, delrin, glass, copper,natural rubber, NBR, Neoprene, nitril, phenol,polycarbonate, polystyrene, porcelain, hardPVC, stainless steel, steel.On porous materials we recommend usingAL-FIX AKTIVATOR or AL-FIX AKTIVATORSF. The use of AL-FIX AKTIVATOR can leadto increased crimp of the adhesive seam aswell as possible lower flexibility.

Product references


501403000 Al-Fix Flexible 20 ml Adhesives and sealants






Al-Fix Gel AFG

SUPER FAST, COLOURLESS, FILLINGGLUE

• Based on cyanacrylate.

• Bonds in seconds.

• No heating - no soldering - no mixing.

• High tensile shear strength - shows

no shrinkage.

• Very economical - the thinner the

adhesive, the stronger the joint.

General information

AL-FIX GEL is an adhesive which bonds inseconds and has a special formula based onCyanacrylate.AL-FIX GEL is a one component adhesivewhich is solventless and consists mainly ofAthyl Cyanacrylate Monomer.AL-FIX GEL is temperature resistant in therange from -30°C to +100°C.

AL-FIX GEL is resistant to solvents, oils,benzene, temperature fluctuations andatmospheric conditions.AL-FIX GEL joints have a high tensile shearstrength and show no shrinkage.


Colour: crystal clearViscosity mPa's Brookfield 20°C: 60.000 -90.000Specific gravity gr/cm² 20°C: 1.08Flashpoint DIN 55213 in °C: 87Initial hardening on alu in sec. at 23°C 50%n.v.: 60 - 100

on Nora Rubber: 12 - 25on hard PVC: not appropriateShelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• AL-FIX GEL provides an exceptionallystrong bond between almost all kinds ofmaterials, with the exception of polyethylene,polypropylene and fluorine containingmaterials. AL-FIX GEL is recommended wehna thicker adhesive seam and better filling isrequired. Materials which can be bondedwith AL-FIX: ABS, aluminium, bakelite,bronze, buthyl, celluloid, chloroprene,chrome, delrin, glass, copper, natural rubber,NBR, neoprene, nitril, nylon, phenol,polycarbonate , polystyrene, porcelain, hardpvc, stainless steel.


Product references


501205000 Al-Fix Gel 20 ml Adhesives and sealants





Al-Fix Remover AFR

100% SOLVENT-FREE GLUEREMOVER FOR CYANOACRYLATEGLUES

• 100% solvent-free.

• Dissolves fast and easily superfast

adhesives.

• Removes hardened as well as non-

hardened cyanoacrylate adhesives.

• Simplifies the removal of hardened

PU-foam.

General information

AL-FIX REMOVER is a 100% active removingagent without solvent, based on ethylcyanoacrylate.AL-FIX REMOVER removes AL-FIX fromvarious materials.

AL-FIX REMOVER can also be used as asoftener for other glues and polyurethanefoams.


Colour: colourless.Viscosity MPa's Brookfield 20°C: 1.Specific gravity gr/mm³: 1,06.Flashpoint DIN 55213: 110°C.Dissolving time at 20°C: 30 sec.

Without solvent.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• suitable for removing residual glue from:most metals, aluminium, glass, plexiglass,polyester, polystyrene, ceramics,...

• Always check the material being treated forresistance and colourfastness.

Product references


501080000 Al-Fix Remover 20 ml Adhesives and sealants



B1 Foam B1 F

MEASURABLE INSULATION ANDMOUNTING FOAM

• Accurate dosing.

• No after-expansion.

• Controlled expansion.

• High form stability, shrink-proof.

• Applicable at temperatures to -10°C.

• Excellent mounting characteristics.

• Perfect adhesion to most materials.

• Corresponds to building classification

B1.

General information

B1 FOAM meets the fire resistance class B1,which is the best fire resistance classificationthat can be obtained for a PU-foam.B1 FOAM has a high insulating value, thermicas well as acoustic, and meets all noisestandards to 57db.

B1 FOAM has an excellent adhesive power tomost materials.B1 FOAM has a high form stability; noshrinkage or post-expansion.


Base material: polyurethane.Consumption: the content is sufficient for 40m open sprayed joints (joint size 2x5 cm).Curing time: +/- 60 minutes.Non-adherence of surfaces: 9 -11 minutes.Cutting of foam thickness of: 30 - 35 minutes20 mm.Apparent particle density: 17 - 19 g/l.Heat conductivity: 0.035 W/mk (thermalconductivity).Adherence: adheres to almost all surfaces,excepted from polyethylene, polypropylene,PTFE, some very smooth surfaces andsynthetic materials.

Classification fire resistance: B1, according toDIN-norm 4102 - difficult inflammable.Sound insulation: < 57 db.Shear strength: 4,0 N/cm².Temperature resistance: - 40°C to +110°C.Processing: the temperature of the producthas to be at least 5°C, the temperature of thesurface has to be between -10°C and +35°C.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• fire and smoke preventing sealant betweenwalls, floors and ceilings• sealing all holes in roof structures• applying a sound insulating layer• optimizing insulation in cold-storagetechnique• mounting doors, window frames, panels,windows,... in plastic, aluminium, wood,metal• sealing of connections to roofs, walls, shipfloors and ceilings, skylights, brickwork,...• filling of walls, joints,...

• insulating parts of a construction againstheat, cold and air flow• filling of connecting joints between e.g.window frames, skylights and brickwork• filling of hollow spaces, e.g. cavity walls,holes in concrete, cavities in corrugatedsheets, drilled holes in walls,...• ideal as sound insulation and to prevent athermal bridge• mounting of parts for which fire retarding isimportant

Product references


670505000 B1 Foam aerosol 750 ml Adhesives and sealants

670801000 Foam Cleaner 500 ml Cleaners and degreasers

670903000 Pro Foam gun Tools

670902000 Foam Gun Tools



Carseal Spray CSS

THE NEWEST GENERATION OFSPRAYABLE HYBRID POLYMERS FORSEALING BODYWORK JOINTS

• Fast curing with air humidity.

• Contains no isocyanates and less

than 8% odourless aliphatic solvent.

• Perfectly repaintable with car paints,

even wet.

• Perfect bonding on steel, galvanized

steel, aluminium, wood, primer and

coating.

• Unique strength due to high polymer

content and few fillers.

• Forms a flexible, tough and scratch-

resistant layer after drying.

• Matches all OEM structures with use

of NOVATIO MASTERGUN.

• Perfect UV-resistance.

General information

CARSEAL SPRAY is a unique sprayable jointsealant based on high-quality hybridpolymers. CARSEAL SPRAY remains flexibleand cures under the influence of air humidity,without releasing isocyanates.

CARSEAL SPRAY can be paintedimmediately, even wet in wet.CARSEAL SPRAY contains less than 8 %odourless aliphatic solvent and is thereforenon-aggressive, not even on foampolystyrene.


Form: elastic.Specific weight: 1,38.Viscosity: sprayable paste.Skin cure: 20 min. at 23°C - 50% R.H.Curing: 3 mm at 24 h; 5 mm at 48 h - 23°C -50% R.H.Hardness Shore A: 45.Ultimate elongation: 450%.Tensile strength: 7 N/mm².

Temperature resistance: -40°C to +90°C;shortly: +140°C.Colour: beige and black.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• protection of floorplates and thresholds inthe original look• gluing aluminium on glass, aluminium onwood• protection of battery trays

• making a transition between 2 differentcomponents• as a sound insulation for the engine andmachine spaces,..

Product references


536510000 Carseal Spray Beige cartridge 310 ml Adhesives and sealants

536520000 Carseal Spray Zwart cartridge 310 ml Adhesives and sealants

599516000 Nozzl narrow (0,8 -1,2)cm 10 pcs Tools

599515000 Nozzle width 2 cm 10 pcs Tools

316510000 Mastergun Tools



Duofix DFX

TRANSPARENT EPOXY ADHESIVE INHANDY PACKAGING

• High-quality, simply to use, efficient

and versatile, 2-component epoxy

adhesive.

• Press - mix - apply.

• No weighing or measuring thanks to

the handy mixing tip.

• Bonds to most materials, such as

metals, stone, ceramics, wood, and

many rigid plastics.

• Adhesive doesn’t flow off because of

its thixotropic properties.

• Fills porous and irregular spots.

• Easy to work after hardening.

• The duo cartridge can be resealed

after use.

General information

Duofix is a fast curing, transparent, 2-component epoxy adhesive with extremelyhigh bonding strength.DUOFIX enables quick bonds and repairseven at a relatively low temperature (+5°C)but cure time in this case is longer than atroom temperature.

DUOFIX is an ideal adhesive in repair andmaintenance and bonds almost all materialssuchas metals, glass, stone, ceramics, wood andmany rigid plastics.


EPOXY RESINViscosity (25°C): 10 Pa.s.Content 24 ml: 12 ml.Desnity 20°C: 1,179 g/cm³.

HARDENERViscosity (25°C): 7 Pa.s.Content 24 ml: 12 ml.Desnity 20°C: 1,14 g/cm³.

Mixing ratio: 1.Flashpoint: >200°C.Type: 2-component epoxy adhesive.Hardening: 25°C.Working time: 3 - 4 minutes.Initial reaction time: 9 - 15 minutes.

50% strength: 2 h.75% strength: 4 h.100% strength: 3 days.Temperature resistance: -25°C to +120°Cafter curing.Minimum application t°: +5°C.Tensile strength: DIN 53238 - steel C75 -sandblasted at 23°C.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.

Product references


512005000 Duofix 28 g Adhesives and sealants

512090000 DFX mixing nozzle 10 pcs Adhesives and sealants



Megaplast MM MMM

STRUCTURAL BONDING ANDREPAIRING

• 2-component methyl methacrylate.

• Melts synthetic materials literally

together.

• UV-resistant and repaintable.

• Long open working time, but with a

fast curing.

• Extremely impact-proof and very high

shear and tensile strength: 6000 N/

cm².

• Very good chemical resistance: resists

to solvents, water, acids, cleaning

products, oils, fuels, ...

• Very high temperature resistance: 150

°C (peaks up to 200°C).

• Extreme adherence to ferrous and

non-ferrous metals lacquered or not,

ABS, PVC, acrylates, thermo-setting

composites, ...

General information

Megaplast MM is the 3rd generation acrylicplastics for structural bonding and repair ofsynthetic materials. MEGAPLAST MMconsists

of methyl methacrylates, is fast curing, has anextreme tensile strength and is very good UVand solvent resistant.


Megaplast MM: universal 2 component self-mixing methyl methacrylate adhesive (MMA),for bonding and repairing.Mix ratio: 1/1.Working time: 5 minutes.Fixture time: 12 - 15 minutes.Workable: after 30 minutes.Tensile strength: 60 N/mm².Shear strength: 24 N/mm².Impact strengt : < 20 KJ/m².Constant temperature resistance: 150 °C -approved for paint bake cycling and powdercoating (200° - 20 minutes).Chemical resistance: to most solvents,gasoline, diesel, oil, acides, antifreeze,cleaning products, aggressive vapours, ...

UV-resistance: OK.Adherence: stainless steel, steel, aluminium,lacquer, varnish, wood, plexiglass,polycarbonates, PVC, fibreglass, ABS,polyester, acrylates, vinyl, esters, urethane, ...Colour: black. Can be painted.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


INDUSTRY• repair of hard and flexible syntheticmaterials with fast curing time• repairs quickly ABS, SMC, PVC, HPL,melamine, wood, glass, stone, ...• ideal for chemical anchoring in Gyproc,cellular concrete, bricks, Ytong, concrete,stone, wood, ..• also bonds difficult synthetic materials,except PE, PP, Silicon, Teflon®, ...

AUTOMOTIVE• for repair and bonding of hard and flexible,fibrefilled or not, synthetic materials such aspolyester, extension kits, headlights,bumpers, ...• approved for paint bake cycling andpowder coating, 200°C - 20 min.

Product references


596111000 Megaplast MM 2 x 25 ml +/- 68 g Adhesives and sealants

597902000 Megaplast MM / PPE / PU Mixing tips 12 pcs Tools

590913000 Primer 903 aerosol 150 ml Surface protection and treatment

590904000 Reinforcement tissue 904 - 3,6m Tools

590905000 Covering film 905 - 3,6 m Tools

593901000 Mixing gun 2 x 25 ml Tools



Megaplast PPE MPE

INSTANT PLASTIC REPAIRS

• Specially developed to glue PE, PP,

• 2-component acrylate hybrid glue.

• Ideal for gluing, filling and sealing of

difficult to glue plastics.

• Shock-resistant.

• Very high tensile strength.

General information

MEGAPLAST PPE is a 2-component acrylatehybrid glue that has been speciallydeveloped te glue, seal and fill low energysurfaces such as polyethylene andpolypropylene.MEGAPLAST PPE can be used in theautomotive, industrial and electronicssectors. Even in the optical world to glueglass or to mount or fix constructioncomponents.

MEGAPLAST PPE is shock-resistant and hasvery good adhesion to difficult to glueplastics.MEGAPLAST PPE can bind different plasticstogether, whether combined with differentmetals, glass, ceramics,... or not.


Colour: opal. Mix ratio: 1/10.Open working time: 5 minutes at 20°C.Grip resistant: 2 hours at 20°C.Fully hardened: 8 hours at 20°C.Shore D: 50.Tensile strength: 13 N/mm².PE tensile strength: 6.0 N/mm².PP tensile strength: 7.0 N/mm².Elasticity: 5%.

Temperature for use: 20-25°C.Temperature resistance: +120°C.Chemical resistance: very good, oil, diesel,benzene,Can be painted on: yes.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• gluing or sealing materials and plastics withan extremely low surface tension such as PP,PE,..• gluing PP and PE with ABS, PVC, HPL,

melamine, wood, glass stone, polyester, hardand flexible plastics, filled with fibre or not

Product references


597101000 Megaplast PPE 37 ml Adhesives and sealants


593900000 Megaplast PPE mixing gun 1/10 1/1 Tools



Megaplast PU 25s MPU25s


• 1:1 urethane- intermix.

• Prepolymerised technology.

• Can be sanded fast- even on thin

layers.

• Simple method - one product for all of

your repairs.

• Fast- simple- profitable.

• Approaches the strength and flexibility

of synthetic materials.

• Repair and assemble with the same

product.

• Practical packaging: one cartridge per

repair.

General information

MEGAPLAST PU is a professional 2-component, self-mixing PU system forsuperfast gluing and repairing.MEGAPLAST PU can be sanded quickly,even on thin layers.MEGAPLAST PU approaches the strengthand flexibility of synthetic materials.

MEGAPLAST PU is the handiest and fastestrepair method.MEGAPLAST PU can be used several timesand closed perfectly again.


Colour: black / beigeMixing time: 15 secondsWorking period: 25 seconds.Treatable after: 4 to 6 min. at 23°C.Fully loadable after: 10 min.at 23°C.Elasticity: 72%.Tensile strenght: 2610N/cm²Pushing strength on aluminium: 1370/cm².

Temperature resistance: -30°C to +100°C.Temperature of use: min. +10°CWater absorption: <1.0%

Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• repairing and gluing of hard and flexibleplastics (fibre filled or not), such as polyester,insulation materials, HPL, ABS, SMC, PC,...

as well as hard and soft wood, glass, ferrousand non-ferrous metals

Product references


594201000 Megaplast PU 25s zwart 2 x 25 ml Adhesives and sealants

594202000 Megaplast PU 25s beige 2 x 25 ml Adhesives and sealants









Megaplast PU 90s MPU90s


• 1:1 urethane- intermix.

• Prepolymerised technology.

• Can be sanded fast- even on thin

layers.

• Simple method - one product for all of

your repairs.

• Fast- simple- profitable.

• Approaches the strength and flexibility

of synthetic materials.

• Repair and assemble with the same

product.

• Practical packaging: one cartridge per

repair.

General information

MEGAPLAST PU is a professional 2-component, self-mixing PU system forsuperfast gluing and repairing.MEGAPLAST PU can be sanded quickly,even on thin layers.MEGAPLAST PU approaches the strengthand flexibility of synthetic materials.

MEGAPLAST PU is the handiest and fastestrepair method.MEGAPLAST PU can be used several timesand closed perfectly again.


Colour: black.Mixing time: 50 seconds.Working period: 90 seconds.Treatable after: 10 min.at 20°C.Fully loadable after: 30 min. at 20°C.Elasticity: 72%.Tensile strenght: 2610N/cm².Pushing strength on aluminium: 1370N/cm².

Temperature resistance: -30°Cto+100°C.Temperature of use: min. +10°C.Water absorption: +10°C



• repairing and gluing of hard and flexibleplastics (fibre filled or not), such as polyester,insulation materials, HPL, ABS, SMC, PC,...

as well as hard and soft wood, glass, ferrousand non-ferrous metals

Product references


594111000 Megaplast PU 90s zwart 2 x 25 ml Adhesives and sealants









Multifix MFX

FAST CURING 2-COMPONENTMETHYLMETACRYLATE ADHESIVETHAT HARDENS AT ROOMTEMPERATURE

• Reacts very fast.

• No measuring, no weighing, no

mixing.

• Resists water and chemicals.

• High temperature resistance.

• High tensile strength.

• Fills irregularities in the materials to be

bonded.

• Contains no solvents - does not

shrink while hardening.

• Resists the coefficient of expansion of

different materials.

• Easy to use.

• Ideal for glass - metal bondings.

• Multifix comes in two versions:

• MULTIFIX CLEAR:

- transparant version with low viscosity.

• MULTIFIX:

- high filling capacity, high viscosity.

General information

MULTIFIX is a fast curing 2-componentmethyl metacrylate adhesive that hardens atroom temperature.The two components, the resin and activatordo not have to be pre-mixed. The hardeningprocess starts as soon as the activatorcomes into contact with the resin.MULTIFIX fills gaps up to 0,8 mm. After 2 to5 minutes the pieces can be handled, andafter 2 to 3 hours MULTIFIX will haveobtained 90% of its total definitive strength.MULTIFIX comes in two versions:

- MULTIFIX: amber coloured - for bondingwhere a filling adhesive with a high viscosityis necessary.- MULTIFIX CLEAR: transparant - for bondingwhere a transparant joint and low viscosity ofthe resin are desired.


Temperature resistance: -35°C to +155°Cpermanent / +180°C: 30 minutes.Cleaning: non cured: KSS-SSO; cured:mechanically.Consumption: 180 to 300 gr/m² at layerthicknesses of 0,15 to 0,25 mm.In case of larger layer thicknesses, or if a fastcuring is desired, apply the activator on bothsurfaces.



Universal use in maintenance and workshops.• electrotechniques• machine components repair

• glass - metal connections• gluing of rear view mirrors

Product references


503005000 Multifix 60 g Adhesives and sealants

503105000 Multifix Clear 60 g Adhesives and sealants



Nova Power Grip 401 2-K NPG1

2-COMPONENT PU-ADHESIVE

• The pre-eminent bonding and repair

system!

• Works as a single component system.

• Superfast and shrink free hardening -

in thick and thin layers.

• High filling capacity.

• Perfect adhesion to concrete, stone,

wood, leather, glass,...

• Unique adhesion to metals and

synthetic materials.

• Has a tensile strength of 2620 N/cm².

• Can be sanded, tapped or drilled very

quickly.

• If more working time is required,

please see Nova Power Grip 403 and

409.

• For a perfect finish please use

Novablack Magic.

General information

NOVA POWER GRIP 401 / 401 2-K is asuperfast assembly and repair adhesive toglue or repair headlight supports, bumpers,decorative strips, clips for door cladding,...NOVA POWER GRIP 401 / 401 2-K is theideal glue for chemical anchoring on mostconstruction materials.Repairs and gluing of hard, flexible, semi-flexible and fibre-filled plastics, plastics,painted steel, stone, concrete, melamine,wood,...

NOVA POWER GRIP 401 / 401 2-Kapproaches the strength and flexibility ofsynthetic materials. For a perfect finish (suchas lacquering) we recommend to useNovablack Magic.


Mixing time (23°C): 50 seconds.Acting time (23°C): 1 to 2 minutes.Can be sanded/manipulated: after 10minutes.Can be painted on: after 60 minutes.Elastic strength (%): 70%. Tensile strength: 2620 N/cm².Shear strength: 1378 N/cm².Temperature resistance: 90°C.Colour: black.Adherence: very good attachment to mostplastics, polyesters, ferrous and non-ferrousmetals, enamels and varnishes surpasses thecohesion of surfaces such as concrete,stone, wood,... more than 2N/mm² on metals(practical calculated value).

Chemical resistance: resistant to many acids,alkalis, oils, fats, petrol, heating oil, manysolvents, salt solutions, aggressive vapoursand sea air, not resistant to strong solvents.Hardening: no shrinkage.Min. processing temperature: 8°C.Electrical resistance: > 109Ohm.Solids content: 100%.Important: less good to poor adhesion canoccur on plastics such as PE, PPU andsilicones. Test first.Shelf life: 12 months, keep dry, cool andfrost-proof. Safety measures: consult theSafety Data Sheet.


AUTOMOTIVE• repairs hard and flexible plastics with a veryfast drying time• repairs headlights, bumpers, decorativestrips,... where fast drying time is required

INDUSTRY• ideal for chemical anchoring in Gyproc, gasconcrete, concrete building blocks, Ytong,concrete, stone,...

• repair of hard and flexible plastics with avery fast drying time• quickly glues ABS, SMC, PC, HPL,Melamine, whole rattan, wood, stone,...• quickly glues insulating materials likeStyrodur, Rock wool, Rock pannel

Product references


590411000 Nova Power Grip 401 2-K 250 ml Adhesives and sealants


590917000 Nova Power Grip Cleaner bottle 1 l Cleaners and degreasers

315101000 Seal & Bond Gun 310ml - 18:1 Tools



599001000 Pneumatisch 2-component gun 2 x 100 ml Tools



Nova Power Grip 403 - 403 2-K NPG3



system!











quickly.


Novablack Magic.

• For a faster or slower version please

have a look at Novat Power Grip 401

or 409.

General information

NOVA POWER GRIP 403 / 403 2-K is aqualitative 2-component adhesive with a fastcuring time to mount and repair bumpers,headlights, decorative strips,...NOVA POWER GRIP 403 / 403 2-K is theideal glue for repairs and bondings of hard,flexible, semi-flexible and fibre-filled plastics,plastics, painted steel, stone, concrete,melamine, wood,...NOVA POWER GRIP 403 / 403 2-Kapproaches the strength and flexibility ofsynthetic materials.

NOVA POWER GRIP 403 / 403 2-K is suitableas both an adhesive and repair system.For a perfect finish (such as lacquering) werecommend to use Novatblack Magic).NOVA POWER GRIP 403 / 403 2-K can alsobe used for chemical anchoring in concreteand hollow bricks.


Mixing time (23°C): 2 minutes.Working time (23°C): 3 to 4 minutes.Can be sanded/manipulated: after 30minutes.Can be painted on: after 60 minutes.Elastic strength (%): 70%.Tensile strength: 2620 N/cm².Shear strength: 1378 N/cm².Temperature resistance: 90°C continuous.Colour: black.Adherence: very good adherence to mostplastics, polyesters, ferrous and non-ferrousmetals, enamels and varnishes; surpassesthe cohesion of surfaces such as concrete,stone, wood,...; more than 2N/mm² on metals(practical calculated value).

Chemical resistance: resistant to many acids,alkalis, oils, fats, petrol, heating oil, manysolvents, salt solutions, aggressive vapoursand sea air,...; not resistant to strongsolvents.Hardening: no shrinkage.Min. processing temperature: 8°C.Electrical resistance: > 109Ohm.Solids content: 100%.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


AUTOMOTIVE• repair and bonding of hard and flexible -fibre-filled or not) synthetic materials, such aspolyester car-kits, headlights, bumpers,spoilers, decorative strips, etc.

INDUSTRIE• ideal for chemical anchoring in Gyproc, gasconcrete, concrete building blocks, Ytong,concrete, stone,...

• repair of hard and flexible plastics with avery fast drying time• quickly glues ABS, SMC, PC, HPL,Melamine, whole rattan, wood, stone,...• quickly glues insulating materials likeStyrodur, Rock wool, Rock pannel

Product references











Nova Power Grip 406 NPG6



system !











quickly.


Novablack Magic.

General information

NOVA POWER GRIP 406 for universal repairand bonding of ferrous and non-ferrousmetals. Adheres also perfectly to plastics,painted steel, glass, stone, concrete,melamine, wood,...NOVA POWER GRIP 406 approaches thestrength and flexibility of synthetic materials.NOVA POWER GRIP 406 can be sanded veryquickly when applied in either thick or thinlayers.

NOVA POWER GRIP 406 can be used forbonding and as a repairing system.NOVA POWER GRIP 406 is metal-filled.For a perfect finish (such as lacquering) werecommend to use Novablack Magic.


Mixing time(23°C): 2 minutes.Working time (23°C): 4 to 6 minutes.Handling time: after 30 minutes. Can bepainted: after 60 minutes.Elongation (%): 70%.Tensile strength: 2550 N/cm². Shear strength:1121 N/cm².Temperature resistance: 100°C permanently.Colour: grey (colour of aluminium).Adherence: to concrete, stone, wood,glass,...; the bonding system is stronger thanthe materials bonded together; exceeds 2N/mm² on metals (practical calculation value).

Chemical resistance: resists to most acids,alkali, oils, greases, petrol, heating oil, mostsolvents, salt solutions, aggressive vapoursand sea air; does not resist to strongsolvents.Hardening: no shrinking.Min. working temperature: 8°C.Electrical resistance: > 109Ohm.Solid content: 100%.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


AUTOMOTIVE• for the bonding of ferrous and non-ferrousmetals, repair of damaged screw-thread,repair of engine parts which can't be welded,such as ALU, zamac,...• to fill up antenna holes,...

INDUSTRY• repair of engine and machine parts whichcan't be welded• repair of slideways and key ways• repair of used rotors or blades of fans andpumps• repair of pump houses and butterfly valves

Product references


590406000 Nova Power Grip 406 2 x 110 ml Adhesives and sealants









Nova Power Grip 409 - 409 2-K NPG9



system !


• Superfast hardening - in thick and thin

layers.

• Hardens without shrinking.








quickly.


Novablack Magic.

• For shorter working time please have

a look at Nova Power Grip 401 and

403.

General information

Is a superstrong 2-component adhesive withlong open working time to bond spoilers,panels, bumpers,...NOVA POWER GRIP 409 / 409 2-K is theideal adhesive for universal repairs andbondings with a long working time.NOVA POWER GRIP 409 / 409 2-Kapproaches the strength and flexibility ofsynthetic materials.

NOVA POWER GRIP 409 / 409 2-K can besanded quickly, both on thin and thick layers.NOVA POWER GRIP 409 / 409 2-K is suitableas both an adhesive and repair system.For a finish layer we recommend to useNovablack Magic.


Mixing time (23°C): 5 minutes.Acting time (23°C): 8 to 10 minutes.Can be sanded/manipulated: after 60minutes.Can be painted on: after 2 hours.Elastic strength (%): 80%.Tensile strength: 2620 N/cm².Shear strength: 1378 N/cm².Temperature resistance: 90°C continuous.Colour: black.Adherence: very good adherence to mostplastics, polyesters, ferrous and non-ferrousmetals, enamels and varnishes surpasses thecohesion of surfaces such as concrete,stone, wood,...; more than 2N/mm² on metals(practical calculated value).

Chemical resistance: resistant to many acids,alkalis, oils, greases, petrol, heating oil, manysolvents, salt solutions, aggressive vapoursand sea air,...; not resistant to strongsolvents. Hardening: no shrinkage.Min. processing temperature: 8°C.Electrical resistance > 109Ohm.Solids content: 100%.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


AUTOMOTIVE• gluing ferrous and non-ferrous metals,repairing damaged screw thread, non-weldable engine components such as ALU,zamac,...• sealing antenna holes,...

INDUSTRY• repairing non-weldable machine and enginecomponents

• repairs of sliding and pin tracks• repairs of split rotors or blades of ventilatorsand pumps• repairing pump houses and butterfly valves• gluing ferrous and non-ferrous metals

Product references











Nova Titan Stick NTS

2-COMPONENT EPOXY RESINREPAIR PRODUCT, FILLED WITHTITANIUM

• Composed of epoxy resins and

titanium.

• Extremely suited for applications

where high temperature resistance is

required.

• Extreme temperature resistant from

-35°C to 300°C.

• Economical and very easy to use.

• Always the correct mixture.

• Can be used for repairing and

bonding.

• Unique adhesion to all ferrous and

non-ferrous metals, also to wood,

glass, concrete, ceramic surfaces and

most synthetic materials.

• Pressure-resistant to 84N/mm².

• Non-conductive and anticorrosive.

• Resistant to oil, alcohol, fuels, acids

and most chemical influences.

General information

NOVA TITAN STICK is an epoxy resin repairproduct, filled with titanium and is hightemperature resistant (300°C).NOVA TITAN STICK can be used to bondand repair various materials.NOVA TITAN STICK adheres to almost allmetals, such as bronze, brass, copper,aluminium, crude iron, steel, but also toconcrete, wood, glass,... and even to mostsynthetic materials.

NOVA TITAN STICK can be drilled, sanded,tapped or grinded.


Viscosity: solid paste.Colour: brown.Working time: 60 to 90 minutes (20°C).Drying time: 360 minutes (20°C).Hardening: 24 hours (20°C).Temperature resistance: -35°C to +280°C(max. 300°C).Tensile strength: 20 N/mm².Pressure resistance: 84 N/mm².

Chemical resistance: most acids, oils,alcohols, fuels, esters, water,...Tension and shear resistance: 5.1 N/mm².Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


INDUSTRY• repair of boiler housings and burners• repair of corrosion damage on radiatorsand heat exchangers• repair of valves and closing devices ofcompressors• repair of defect pump housings, wornbearing housings, pipelines, damaged screwthread• repair surfaces that will be lacquered at ahigh temperature

AUTOMOTIVE• repair of air intake manifolds as well asexhaust manifolds• repair of engine blocks, oil sumps, waterpumps,• repair of damaged screw thread, housing ofinjection systems and other parts, metal fueltanks, tanks,...

Product references


638010000 Nova Titan Stick 57 g Adhesives and sealants



Nova Wet Stick NWS

2-COMPONENT CERAMIC-FILLEDEPOXY RESIN

• Can be applied on moist surfaces,

even under water.

• Always the correct mixture: cutting

off, kneading and ready for use.

• For a fast repair of cracks, holes,

leaks,....

• To fill surface damages.

• Unique adherence to ferrous and

most non-ferrous metals, but also to

wood, glass, concrete, ceramic

surfaces and most plastics.

• Hardened NOVA WET STICK can be

drilled, sanded, tapped and painted.

• Pressure-resistant to 75 N/mm².

• Very good chemical resistance to oil,

alcohol, fuels, esters, acids and most

chemical influences.

• Fast curing.

General information

NOVA WET STICK is a ceramic-filled epoxyresin, ideal for fast repairs, even under water.Adheres to most surfaces, like metal, hardplastic, wood, glass, stone,...

Hardened NOVA WET STICK can be drilled,sanded, tapped and painted.After curing NOVA WET STICK is very goodchemical resistant and electric insulating.


Composition: epoxy resins and ceramicpowder.Viscosity: solid paste.Colour after hardening: white.Working time: 30 minutes.Curing time: 60 minutes.Important: high temperatures accelerate thecuring time; low temperatures slow down thecuring time.Chemical resistance: complete after 24hours; against a.o. alcohol, esters, salt water,oils, most acids and lyes (see chemicalresistance list). Temperature resistance: from-50°C to +120°C; shortly to +150°C; if ahigher temperature resistance is required, weadvise you to use our NOVA TITAN STICK.

Tensile strength (DIN 53283): 6.2 N/mm².Pressure resistance (DIN 53281-83): 75 N/mm².Shore hardness D: 65.Electric resistance (ASTM D257): 5-10" ft/cm.Dielectric resistance (ASTM D149): 3.0 KV/mm.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


Sealing of leaks, cracks, holes,... in:• water tanks, drain pipes, pleasure boats,roof gutters• petrol tanks• radiators of buildings, vehicles, machines,...• electric switchboards• sanitary installations• swimming pools

Filling of unevennesses:• for repair of wood carving and others• aesthetic repair: windows, doors andfurniture

Product references


638050000 Nova Wet Stick tube 115 g Adhesives and sealants



Novabond 2 NB2

HIGH-TECH 2-COMPONENT HYBRPOLYMER FOR ELASTIC SEALINGAND BONDING, HARMLESS TO THEENVIRONMENT

• Fast internal curing, without

shrinkage, as well in thin as in thick

layers - EVEN UNDER WATER.

• Does not contain solvents or

isocyanates, and is odourless.

• Hardens without shrinking, resists

vibrations and remains flexible.

• High tensile strength and unique

adherence of 210 N/cm².

• Does not sink and can be stacked

effectively.

• Weather resistant and bactericidal.

• Repaintable - even with acrylic and

dispersion paints.

General information

NOVABOND 2 is the newest generation ofhybrid polymers for bonding, sealing andjoining. Because of its 2-component method,one can obtain fast internal polymerization,without shrinkage and independently ofexternal influences like humidity. Both thickand thin layers cure quickly - even underwater.NOVABOND 2 combines in 1 product theadvantages of mounting adhesive, PU-glue,wood glue, silicone and sanitary sillicone kit,acrylic and butyl rubber kit, elastic jointingkits.

NOVABOND 2 is weather resistant, is anti-fungal and bactericidal.NOVABOND 2 remains flexible, resists strongvibrations, is impact-resistant and torsion-resistant.NOVABOND 2 is a nearly odourless, neutralsystem, which does not contain silicones,isocyanates or solvents.


Colour: black / grey.Operating temp, range at 50% R.H.: +5°C to+40°C.Volume change - DIN 52451: +/- 10%.Consistency: stable in joints up to 40 mmwidth.Density at 23°C: component A: 1.37 g/cm³+/- 0.03 g/ml; component B: 1.36 g/cm³ +/-0.03 g/ml. Operating time at 23°C, 50% R.H.:+/- 25-45 min.Temp, resistance after curing: -40°C to+90°C -momentary to +120°C.Hardness shore A - DIN 53505 storage at23°C and 50% R.H.: after 4 hours: Shore A15-20; after 7 days: Shore A 40-45 (100%).Module at 100% elongation and +23°C -DIN 53504 S2 - storage 7 days at 23°C and50% R.H.: +/- 0.7 N/mm².

Tensile strength DIN 53504 S2 - storage 7days at 23°C and 50% R.H.: +/- 2.0 N/mm² -after 4 hours already 50% of the tensilestrength is obtained. Elongation after fracture:+/- 500%.Adherence: bonding is possible on mostsurfaces -even smooth surfaces- withoutusing a primer.Chemical resistance: good: diluted acids,alkali, aliphatic solvents, oils, greases, waterand seawater; moderate: esters, ketonen andaromatics; bad: concentrated acids,chlorinated solvents.Shelf life: 12 months in a closed and originalpacking at +5°C and +25°C - in a cool, dry,frost-free place.Safety measures: consult the Safety DataSheet.


• can be used on: steel, stone, stainlesssteel, wood, aluminium, concrete, anodizedaluminium, powder coated, lacquered,galvanized chromed and hot galvanizedsurfaces, brass surfaces,

• copper, ceramic material• It is advisable to be very careful withapplications that obtain a high temperatureas a result of the sun III

Product references


529106000 Novabond 2 zwart 2 x 300 ml Adhesives and sealants

529306000 Novabond 2 lichtgrijs 2 x 300 ml Adhesives and sealants

529401000 Novabond 2 mixing gun 2 x 300 ml Tools

529404000 Pneumatic gun Novabond 2 x 300 ml Tools



Novalok Aktivator NLKA

FOR A FAST CURING OF NOVALOK

• Degreases the materials that need to

be locked.

• Reduces to a minimum the number of

locking products required.

• Makes locking of non ferrous metals

and even of synthetic materials

possible.

General information

NOVALOK AKTIVATOR fastens the curing ofNOVALOK sealing and locking products onall metal surfaces.NOVALOK AKTIVATOR activates the curingon slow surfaces such as stainless steel,galvanised or cadmium platedcomponents, ...

NOVALOK AKTIVATOR makes it possible toapply NOVALOK on non ferrous metals at lowtemperatures (of 0°C and higher) and tobridge a larger gap.NOVALOK AKTIVATOR degreases and cleanssurfaces.




• simply spray NOVALOK AKTIVATOR andthe components you want to lock. Let it drycompletely after which you can applyNOVALOK and mount the components.

• NOVALOK AKTIVATOR can damagelacquered components and some syntheticmaterials. Needs to be used in open, wellventilated places.

Product references


545001000 Novalok Aktivator 200 ml Adhesives and sealants



Novalok C NLKC

EASY TO USE SEALING ANDLOCKING SYSTEM



• Solventfree - one component - fast

curing.

• Makes all metal fasteners self locking,

self sealing and reusable.

• Protects against corrosion.

• Withstands vibrations and shocks.

• Seals instantly.

• Seals will not shrink or crack.

• Withstands most industrial gases and

fluids like petrol, diesel, greases,...

• Withstands temperatures from -55°C

to +150°C.

• Three types of NOVALOK cover all

your needs.

General information

NOVALOK anaerobics are uniquely differentfrom other types of metal adhesives orsealants.NOVALOK needs no catalysts and containsno solvents, instead, it cures in the absenceof air.NOVALOK anaerobic adhesives remain liquidon exposed metal surfaces, so you don'thave to assemble parts immediately.However, when placed between snug fittingmetal surfaces which exclude air, it cures tofull strength producing a tough, inert plasticthat prevents corrosion, locks, seals andretains.

NOVALOK is formulated so it holds partssecurely, yet allows them to be disassembledwith conventional tools when necessary.The 3 NOVALOK types SF, M and C differfrom each other by their technicalspecifications such as viscosity, fast curingand final strength.NOVALOK provides the right filling layer fordifferent gaps.


Colour: green.Applications: to M 36.Viscosity in mPa-S at 25°C: 10.GAP-sealing range mm breakaway: 0.2 - 0.1.Steel/steel/N/mm²: 4.5 - 7.5.

Temp, range °C: -55+150.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• for sealing and locking after assembly

Product references


543003000 Novalok C 50 ml Adhesives and sealants



Novalok M NLKM





curing.










to +150°C.


your needs.

General information




Colour: blue.Applications: to M 36.Viscosity in mPa-S at 25°C: 1000.GAP-sealing range mm breakaway: 0.05 -0.5.Steel/steel/N/mm²: 4 - 8.5.



• to lock bolts, screws and to seal pipes(water, steam, gas, compressed air, hydraulicoil, ...)

Product references


542003000 Novalok M 50 ml Adhesives and sealants



Novalok SF NLKS





curing.










to +150°C.


your needs.

General information




Colour: green.Applications: to M 36.Viscosity in mPa-S at 25°C: 2500.GAP-sealing range mm breakaway: 0.08 -0.5.Steel/steel/N/mm²: 12 - 20.



• for strong adhesion to ball bearings, bolts,cog wheels, cylindric components.

Product references


541003000 Novalok SF 50 ml Adhesives and sealants



Novaroof NRF

LASTING ELASTIC, FIBRE-REINFORCE AND WATERTIGHTPROTECTIVE AND SEALING PASTE

• Sealing, repairing, waterproofing and

bonding with one product.

• Can be applied on moist surfaces.

• Adheres to most building materials:

brick, concrete, wood, lead, copper,

tin, bituminous roofing materials,

galvanized steel, insulating materials,

PVC, polyester.

• Remains flexible after curing.

• Very easy to apply, also on small,

difficult places, due to cartridge

packing.

• Can also be applied at low

temperatures -10°C.

General information

NOVAROOF is a sealant with a uniquecomposition. Due to the combination ofbitumes, butyl rubber and glass fibres, aproduct with a very high tensile strength andflexibility is obtained.

NOVAROOF can be applied on mostsurfaces, also in a moist condition.


Composition: modified bitumes, glass fibresand butyl rubber.Elongation at rupture (dry film): 170%.Temperature resistance: -45°C to +85°C.U.V. resistance: excellent.Ageing properties: none during 20 years.Water resistance: very good in case of anormal draining.Climatic resistance: excellent.

Resistance to hydrocarbons: non resistant.Application temperature: -12°C to +50°C.CAUTION: DO NOT APPLY ON SNOW ORGLAZE ICE IIIShelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• NOVAROOF can be applied on mostbuilding materials such as: brick, concrete,wood, lead, copper, roofing materials,galvanized steel, insulation materials, PVC,polyester.

TYPICAL APPLICATIONS:• all types of roof repairs: sloping and flatroofs, roof gutters, edgings, drain pipes, leadflashings, corrugated plates

• sealing and finishing off of roof joints,eaves, feedtrough ducts, chimneys• as cold adhesive for roof repairs withbituminous roofing materials• making waterproof of concrete andbrickwork in foundations and terraces• corrosion protection of undergroundpipelines and channels

Product references


602106000 Novaroof cartridge 310 ml Adhesives and sealants

602210000 Novaroof jar 10 kg Adhesives and sealants




Novaseal NSL

PAINTABLE SEALING CEMENT

• Can be applied on both dry and wet

surfaces.

• Does not sag - does not string out.

• Fast skin cure.

• Does not contain silicones - can be

painted immediately.

• Can be mixed with paint.

• Remains flexible - does not tear.

• Bonds to metal, glass, ceramics,

wood, painted surfaces and most


• Easy to apply, even on vertical

surfaces.

• Can be applied between 5°C and

40°C.

• Perfect U.V. resistance.

• Contains no acids, thus no corrosion

to metals.

• Available in three colours: clear, black

and white.

General information

NOVASEAL is a 1-component, high qualitypaintable sealer based on liquid rubber, andpacked in a standard cartridge.The product is universally suitable forpractically all building materials in bothhorizontal or vertical applications.

After curing, the material stays flexible.


Viscosity: soft-thyxotropic.Working time: 15 minutes.Tensile strength: 1,5 N/mm².Elongation: 600%.Weight/liter: 1,04 kg/liter.Temp, of surface by application: +5°C up to+40°C.Temp, resistance after curing: -25°C up to+100°C.

UV-resistance: excellent.Water resistance: excellent.Curing: 0,75 mm / 24 hours.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


Sealing of all substrates in:• automotive• airconditioning• electrical• building and construction• sanitary installations

NOVASEAL bonds to: glass, metal, ceramics,wood, painted surfaces and syntheticmaterials.

Product references


581006000 Novaseal helder 310 ml Adhesives and sealants

581106000 Novaseal black 310 ml Adhesives and sealants

581206000 Novaseal white 310 ml Adhesives and sealants

315100000 Seal & Bond Gun 310 ml - 12:1 Tools



PH Butyl PHB

DURABLE PLIABLE AND STICKYBUILDING SEALANT

• For passive housing.

• Easy to use.

• Also adheres to damp surfaces.

• Easy to remove.

• Water, air and odour proof.

General information

PASSIVE HOUSE BUTYL is a UV andwaterproof sealing sealant for water, air, andodour sealing applications in the constructionindustry, and can always be removed.Bonds most building materials and metals,

lead, EPDM, powder coating, lacquer, paint,glass, PVC, polyester, wood, and alsobetween polyethylene and polypropylene.


Basic material: poly-isobutylene, syntheticresins, mineral fillers, and solvents.Form: paste.Colour: black.Stable form: after evaporation of thesolvents.Specific gravity: 1.4 g/cm³.Open time (20°C/50% relative humidity):approx. 3 hours.Solvent percentage: approx. 11%.

Temperature tolerance: -30°C to +100°C.Application Temperature: +5°C to +35°C.UV resistance: high.Weather resistance: high.Paintable: no.Storage life: 12 months kept in a dry, cooland frost-free place.Safety measures: please consult the safetycard.


Applications:• Sealing of overlapping parts such as waterbarrier membranes, housing and insulationmaterial, draft excluders, ... .• Screw fittings, electrical components, suchas cabinets, lighting, .... .• Sealing of anchor bolts when mountingitems such as roofs, air conditioning, solarpanels, etc.• For window and door installations, solarroofs, cupolas, verandas, ... .

Instructions for use:- PASSIVE HOUSE BUTYL bonds withoutpre-treatment on clean surface.- PASSIVE HOUSE BUTYL apply between thematerials and press together.- Surplus PASSIVE HOUSE BUTYL can beeasily dabbed off after a few minutes with awad of PASSIVE HOUSE BUTYL. - If needed, material can be cleaned withSAFETY CLEAN.- PASSIVE HOUSE BUTYL remains slightlysticky after evaporation of the solvents.

Product references


604006130 PH Butyl cartridge 310 ml Adhesives and sealants



PU Construct PUC

PU ADHESIVE WITH IMMEDIATEBONDING

• Builder’s adhesive for indoors and

out.

• Solvent-free and does not harm

materials. Clean, odourless and

environmentally friendly.

• Can be spread with a trowel or

spatula

• Very good adhesion on even the most

porous building materials.

• Maximises its adhesion surface by

slight expansion.

• Remains flexible after hardening.

General information

This builder’s adhesive, which only needs airhumidity for curing, is valued for its rapidhardening, excellent adhesion and versatility.

PU CONSTRUCT is used for bonding andmounting of even the most porousconstruction and decorative materials.


Colour: Beige.Thixotropic reactive PU adhesive.Density: 1.45 g/ml.UV resistance: Good.Shear strength: 250gr/cm².Shear strength (wood/wood): 100 N/cm².Shear strength (metal/metal): 140 N/cm².Shear strength (stone/stone): 115 N/cm².Temperature resistance: From -30°C to+80°C.Application temperature: Between +5°C and+30°C.Open working time at 23°C and 55% R.H.:10-15 minutes.Bonding time (for handling): Depending onthe glue thickness, the material, air humidityand temperature: 30 > 60 minutes.

Bonding (complete): Depending on theadhesive thickness, the material, air humidityand temperature: 24 to 48 hours.Not suitable for underwater applications andnot for use on polyethylene (PE),polypropylene (PP), Teflon (PTFE) orbituminous materials.Do not expose to vapours or liquids of highchlorine content.Storage life: 12 months in unopenedpackaging if stored in a dry place between +5and +25°C.


• Very good bonding to wood, chipboard,plywood and HPL panels, glass wool,concrete, stone, masonry as well aspolyurethane and polystyrene foams,…• Installation of window and door frames.• For reinforcing mitre joints in windows(aluminium and PVC).• Strong bonding of constructionalcomponents, formwork panels, joinery,…• Assembly of interior and garden furniture,…• Mounting decorative components todoors,...

APPLICATION:- Apply to one side of dry, dust-free andgrease-free surface. If necessary, clean withMultifoam and/or Safety Clean.- If desired, spread the adhesive with a gluecomb, bring together the materials to bebonded and align under pressure for 15minutes.Fresh glue can be removed with NOVAWIPES(even from the skin). Hardened glue can onlybe removed mechanically. Because it uses airhumidity for hardening, at least one of thebonded surfaces needs to be porous. Fornon-porous surfaces, it is advisable to lightlymoisten either one of the surfaces or theadhesive itself by spraying with a fine mist (nomore than 20ml per m²). Avoid mechanicalloading until fully hardened. Test the bondingif necessary.

Product references


575106000 PU Construct cartridge 310 ml Adhesives and sealants



PU Construct Trans PUT

RAPID HARDENING SINGLECOMPONENT PU ADHESIVE

• Transparent builder’s adhesive for

indoors and out.

• Solvent-free and does not harm

materials. Clean, odourless and

environmentally friendly.

• Can be used vertically without

sagging.

• Very good adhesion on even the most

porous building materials.

• Maximises its adhesion surface by

slight expansion.

• Good resistance to solvents after

hardening.

General information

This builder’s adhesive, which only needs airhumidity for curing, is valued for its rapidhardening, excellent adhesion and versatility.

PU CONSTRUCT TRANS is used for bondingand mounting of even the most porousconstruction and decorative materials.


Colour: transparent.Thixotropic reactive PU adhesive.Density: 1.45 g/ml.UV resistance: Good.Shear strength (wood/wood): 100 N/cm²Shear strength (metal/metal): 140 N/cm²Shear strength (stone/stone): 115 N/cm²Shear strenght: 250 gr/cm².Temperature resistance: From -30°C to+80°C.Application temperature: Between +5°C and+30°C.Open working time at 23°C and 55% R.H.:10-15 minutesBonding time (for handling): Depending onthe glue thickness, the material, air humidityand temperature: 30 > 60 minutes.

Bonding (complete): Depending on theadhesive thickness, the material, air humidityand temperature: 24 to 48 hours.Not suitable for underwater applications.and not for use on polyethylene (PE),polypropylene (PP), Teflon (PTFE) orbituminous materials.Do not expose to vapours or liquids of highchlorine content.Storage life: 12 months in unopenedpackaging if stored in a dry place between +5and +25°C.


• Very good bonding to wood, chipboard,plywood and HPL panels, glass wool,concrete, stone, masonry as well aspolyurethane and polystyrene foams,…• Installation of window and door frames.• For reinforcing mitre joints in windows(aluminium and PVC).• Strong bonding of constructionalcomponents, formwork panels, joinery,…• Assembly of interior and garden furniture,…• Mounting decorative components to doors,…

APPLICATION:- Apply to one side of dry, dust-free andgrease-free surface. If necessary, clean withMultifoam and/or Safety Clean.- If desired, spread the adhesive with a gluecomb, bring together the materials to bebonded and align under pressure for 15minutes.Fresh glue can be removed with NOVAWIPES(even from the skin). Hardened glue can onlybe removed mechanically. Because it uses airhumidity for hardening, at least one of thebonded surfaces needs to be porous. Fornon-porous surfaces, it is advisable to lightlymoisten either one of the surfaces or theadhesive itself by spraying with a fine mist (nomore than 20ml per m²). Avoid mechanicalloading until fully hardened. Test the bondingif necessary.

Product references


575006000 PU Construct Trans cartridge 310 ml Adhesives and sealants



Q-Fix 120 QIX

SUPERSTRONG AND SUPERFASTCHEMICAL ANCHORING

• The technology if anchoring has to be

done, even at freezing temperatures

of -5°C!

• Can be used in both dry and damp

boreholes, and even under water.

• Exceptionally chemical and UV

resistant.

• Anchors in both solid and hollow

bricks, concrete blocks, Ytong,...

• Extremely long shelf life, 18 months

whether opened or unopened.

• Simple, handy and easy to process.

General information

Q-FIX 120 has been specially developed forheavy load bearing chemical anchors inhollow and solid materials such as stone,concrete, aerated concrete,...Q-FIX 120 is a waterproof, impermeableattachment.Q-FIX 120 is a vinyl ester resin that has thebest mechanical characteristics and offersbetter chemical resistance.

Q-FIX 120 also has all of the requiredpermits: the European Technical Approval(ETA/CE) option 7 for uncracked concreteand fire class F120.


Basis: vinyl ester resins.Colour: grey.Odour: weak odour, styrene-free.Temperature resistance: to +80°C, withpeaks to +120°C.Application temperature of the cartridge +/-20°C.Storage: 5 to a maximum of 25°C.Certificates: F120 and ETA.

Adhesion: very good adhesion on all porousmaterials; less good to poor adhesion onsmooth surfaces.Shelf life: 18 months, keep dry, cool andfrost-proof. Safety measures: consult theSafety Data Sheet.


• chemical anchoring• mounting rails, fences, masts, antennas,sun shields, roll-down shutters, lift casings,

heating and cooling systems,... by usinganchored wire rods, hooks, bolts, hinges,profiles,...

Product references


610128000 Q-Fix 120 cartridge 280 ml Adhesives and sealants

610138000 Q-Fix 120 cartridge 380 ml Adhesives and sealants

316600000 Q-Fix 120 380 ml gun Tools


610191000 QFX / NB2 12 pcs Tools



Seal & Bond MS Screen Plus SMS+

ONE-COMPONENT ADHESIVE

• Positive euro NCAP drive test after 1

hour.

• Crashtest certificate FMVSS 212 after

1h with airbag.

• Stays in form, quick hardening.

• High first bond, tensile strength and

torsional stiffness.

• UV-resistant, does not age,

watertight.

• Bonding, without primer on varnish,

lacquer, galvanised surfaces, white

metals, aluminium, etc.

• Opened cartridge can be kept for a

long time.

• Can be applied with a manual or

pneumatic kit gun.

• Unhardened adhesive remains are

easy to remove.

General information

SEAL & BOND MS SCREEN PLUS is a one-component MS polymer adhesive thathardens by air humidity.SEAL & BOND MS SCREEN PLUS driesquickly without primer, less chance ofapplication errors.SEAL & BOND MS SCREEN PLUS has aquick first bond and an excellent permanentbond on varnish, white metals, glass, PVC,aluminium.

SEAL & BOND MS SCREEN PLUS has a hightensile strength and does not show signs ofageing.SEAL & BOND MS SCREEN PLUS is easy touse and does not need to be warmed up likeother high module products.


Basis: High-tech MS polymer.Colour: black.Relative density: 1.5g/m².Viscosity: paste.Shore hardness (DIN 53503): 50 Shore AafterwardsThree weeks at 23 °C / 50% relative airhumidity.Shrinkage (DIN52451): < 5%.Density (DIN EN 27390): non-sagging up to a40 mm thick joint.Tensile strength at break: > 450%.Module at 100% strength: 1.0 N/mm2 23°C(DIN 53504 S2).Tensile strength (DIN 53504 S2): 2.3 N/mm².Skin formation: +/- 5 min.Tack free: after 24 hours 2.5 mm, after 48hours 3.5 mm.

Hardening speed: 6 hours at 23°C at R.V. of50%.Temperature limits: from -40°C to 90 °CApplication temperature: lowest +5 °C –highest 40 °C.Chemical strength: good with water,seawater, aliphatic solvents, oils, grease,thinned organic acids and lyes; average:ester, ketone bodies and aromatics; poor:concentrated acids, chloride solvents; ideal:weather resistantStorage life: 12 months, dry, cool and frost-free.Safety measures: please consult the safetydata sheet.


• Remove at least a part of the oldwindscreen adhesive;• Degrease the adhesive surface withNOVATIO SAFETY CLEAN and blow dry;• Clean the windscreen with NOVATIOSATETY CLEAN and NOVATIO MULTIFOAM:spray, wipe with a cloth and wipe off with acloth clean;

• Apply SEAL & BOND MS SCREEN PLUSequally to the vehicle or on the window;• Open the windows, place the windscreen,press, correct and apply more pressure ifnecessary (within 2 minutes).

Product references


537396000 Seal & Bond MS Screen Plus cartridge 310 ml Adhesives and sealants





Seal & Bond Flex-Sil SBF

THE LIQUID GASKET

• The right gasket in any shape

available in a few minutes.

• Limits the stock and avoids

deteriorated gaskets.

• Fills up irregularities and clearances.

• Immediate results in water- and

airtight joints.

• Withstands chemicals and high

pressures up to 360 kg/cm².

• Remains flexible and stable at high

and low temperatures.

• Easy dismantling.

• Can be delivered in both handy

aerosols or normal cartridge.

• Can applicable on horizontal and

vertical surfaces.

General information

SEAL & BOND FLEX-SIL is a modified,moisture hardening silicone paste of theacetic acid type, with excellent adhesiveproperties on a wide variety of materials.SEAL & BOND FLEX-SIL has a high elasticityvalue, as well as an outstanding chemicaland temperature resistance.

SEAL & BOND FLEX-SIL aerosol can beapplied directly from the tube without usingany extra tools.SEAL & BOND FLEX-SIL adheres to: steel,aluminium, galvanised steel, copper, brass,lacquer, glass, ceramics and varioussynthetic materials.


Basis: polysiloxanes.Skin curing: 5 min. at 23°C and 50% R.H.Total curing: 2 mm/24h at 23°C and 50%R.H. Elongation at break: 500% ISO 8339.Temperature resistance: SEAL & BONDFLEX-SIL BLACK: -60°C to +205°C (peak upto +260°C) SEAL & BOND FLEX-SIL RED :-60°C to +270°C (peak up to +330°C).

Compression strength: 360 kg/cm².Working temperature: +5°C to +40°C.Shrinkage: Nihil DIN 52451.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• sealing of: machine and motorcomponents, screw thread connections,flange connections, air ducts, inlet and outletmanifolds, compressors, pumps, turbines,transmissions, petrol and water pumps,motor cases and valve housing covers,cooling systems, heating oil burners,discharge systems, heat exchangers, ...• insulating and moisture-proofing electriccontacts on towing hook outlets• sealing of joints betweem plate material• sealing of water leakages on rear lights andbody joints• prevents corrosion when mounting aerials,alarm systems, steel plate constructions,...

• prevents galvanizing• adhesion of light objects on non-poroussurfaces• SEAL & BOND FLEX-SIL is resistant to: oils,greases, lubricants, petrol, kerosene,transmission and brake fluids, water, steam,antifreeze agents, fuel oil, alkali, salinesolutions, light acids (up to 20%), glycol,fluor-chlor-methane, butane,...• For an optimal adhesion, the surfacesshould be free from corrosion and grease.

Product references


573206000 Seal & Bond Flex-Sil press-pack black 202 ml Adhesives and sealants

574206000 Seal & Bond Flex-Sil press-pack red 202 ml Adhesives and sealants

573106000 Seal & Bond Flex-Sil cartridge black 310 ml Adhesives and sealants

574106000 Seal & Bond Flex-Sil cartridge red 310 ml Adhesives and sealants




Seal & Bond Flex-Sil S SBFS

LIQUID, NON-HARDENING GASKETSEALANT

• Instant sealing.

• Quick to use: 10 to 15 minutes.

• Also easily vertically applicable.


+270°C.

• Safe in use: never hardens.

• For all metals, plastics, and

combinations thereof.

General information

SEAL & BOND FLEX-SIL S is a single-component sealant that does not harden, iseasy to remove, which provides the perfectsealing solution.SEAL & BOND FLEX-SIL S replaces otherseals or improves them and can therefore beuniversally used for clearances up to 0.2 mm.

SEAL & BOND FLEX-SIL S is ideal forapplications with different combinations ofmaterials subject to temperature fluctuationsand movements.


Base: polyurethane. Isocyanate and silicone-free.Resistant to: all mineral and synthetic oils,greases, fuel, diesel, petrol, water, sea water,gas, air, coolant, antifreeze, etc.

Temperature resistance: from -55°C to+270°C, with peaks up to +300°C. Unlimitedshelf life.


• SEAL & BOND FLEX-SIL S is suitable forapplications such as in gear boxes andcrankcases, flange joints, oil pans, anddifferentials.• Application areas: automotive, chemical,and petrochemical industry, gas, water, andpower plants.

Instructions for use:– Clean and degrease material requiringsealing using SAFETY CLEAN orKLEENSPRAY-S.– Apply sufficient SEAL & BOND FLEX-SIL Sand let evaporate for 10 minutes beforeattaching.– Observe a drying time of 10 to 15 minutesbefore putting into operation.

Product references


570005000 Seal & Bond Flex-Sil S presspack 200 ml Adhesives and sealants



Seal & Bond MS 18 MS18

CERTIFIED SUPERELASTIC MSPOLYMER

• Fulfills the DIN18540 standard.

• Developed for dilatation and

expansion joints in floors and walls.

• Extreme elasticity of 800%.

• UV, fungus and bacteria resistant.

• Extremely good adhesion

characteristics. Free of silicones,

solvents and isocyanates.

• Can be painted.

General information

SEAL & BOND MS 18 is a superelasticsealant for dilatation and expansion jointsbased on hybrid polymers and replacessilicone sealant, acrylate sealant, buthylenesealant, siloxane sealant,...SEAL & BOND MS 18 has been speciallydeveloped to finish off connection joints andis also DIN 18540 certified for high-buildingworks.SEAL & BOND MS 18 has a very strong UV-resistance and resists fungus and bacteria.

SEAL & BOND MS 18 can be painted over ifnecessary, but only with the most highlyelastic paints.SEAL & BOND MS 18 adheres perfectly toconcrete, brick, plasterwork, wood, metaland different types of plastics.SEAL & BOND MS 18 can be used bothoutside and inside.


Skin formation: 23°C 50% R.H. 30 - 40minutes.Full-hardening: 23°C 50% R.H. after 24 hours-approx. 2,5 mm; after 48 hours - approx. 4,0mm.Elongation after fracture: 800% (7 daysstored at 23°C 50% R.H.) - DIN 53504 S2.Hardness - DIN 53505:18 +/- 2 Shore A.Chemical resistance: good against water, saltwater, alipathic solvents, oils, fats, dilutedinorganic acids and alkalis; moderatelyagainst esters, ketones and aromatics; notresistant against concentrated acids andchlorated hydrocarbons.

Thermal stability: -40°C to +90°C. Processingtemperature: between +5°C and +40°C.Density: 23°C 50% R.H. 1,47 +/- 0.02g/cm³.Modulus at 100% elasticity -: < 0.4 N/mm²DIN 53504 S2.Elastic shape recovery - DIN EN 27389:>70%.Movement capacity: 25%Consistency - DIN EN 27390: does not sagwith joints of up to 40mm in width.Shelf life: 12 months in original, closedpackaging; store in a cool and dry location.Safety measures: consult the Safety DataSheet.


expansion and dilatation joints on concrete,brickwork, metal, wood, different types ofplastics, plumbing seals and a combinationwith these materialsthe adherence on surfaces based on PE, PP,PTFE or bitumen has to be tested firstThe correct joint width and preparation of thesurface are required to create the perfectsealing.

The dimension of the joint must be at least 4times as big as the expected movement.The general rule applies that the depth of thejoint must be equal to 3/4 of the calculatedwidth.For more detailed information, see DINspecification 18540F and SIA specificationV274 for the right joint dimension duringconstruction work.

Product references


533227000 Seal & Bond MS 18 white sausage 310 ml Adhesives and sealants

533237000 Seal & Bond MS 18 concrete grey sausage 310 ml Adhesives and sealants

315400000 Seal & Bond Gun sausage 310 ml - 12:1 Tools

316000000 Pneumatic Gun MK5 310 ml Tools




Seal & Bond MS 40 ALU MS40 Alu

ALUMINIUM COLORED SEALING KITWlTH TRANSPARENT FLOW

• Adjusts perfectly to all grey metals.

• Can be used on moist surfaces.

• Anti-fungal and bactericidal.

• Ideal for sealing metal and grey

colored natural stone combinations.

• Does not make any stains on natural

stone.

• Comes with a practical and twistable

nozzle.

• Cures fast.

• Stays elastic.

General information

SEAL & BOND MS 40 ALU is the idealaluminium colored sealing kit for internal andexternal use. Because of the specialcombination of transparent hybrid MSPolymers and aluminium pigments you canalways get the fit color on grey metals. WhenSEAL & BOND MS 40 ALU is applied in athick layer, it gets an ALU-stainless steelcolor. When applied is a thin layer, itbecomes transparent.

SEAL & BOND MS 40 ALU can be used onmoist surfaces.SEAL & BOND MS 40 ALU cures fast andstays elastic. Can be used for both elasticfixing and sealing.


Flow: 5 bar / 3 mm / 23°C 160 g/min.Skin cure: 23°C 50% R.V. 5 minutes.Non-adhering: 23°C 50% R.V. 40 minutes.Full cure time: 23°C 50% R.V. 24 u - 4 mm,48 u - 5 mm, 72 u - 8 mm.Max. allowable deformation: 20% (acc. ISO9046).Expansion joint: ISO 11600 F 20% HM E.Hardness - DIN 53505:40 Shore A.Tensile strength: 220 N/cm².Tear strength - DIN 53507: ca. 40N/cm².Thermal stability: -30°C to +95°C.Peak: 155°C max. 30 min.Volume shrinkage after cure: < 2%.Bonding: excellent on tiles, cement, naturalstone, wood, concrete, aluminium; on PP,PE, PTFE and bitumen no bondingguaranteed.

Elongation after fracture - DIN 53504: >250%.Colour invariability: colour change can becaused by external circumstances.Can be repainted: OK with most solvent- andwaterbased lacquers.Chemical resistance: good: water, seawater,aliphatic solvents, oils, greases, dilutedorganic acids, lyes; moderate: esters,ketones, aromatics; bad: concentrated acids,chlorinated solvents, swimming pool water.Shelf life: 12 months, keep dry, cool andfrost-proof. Safety measures: consult theSafety Data Sheet.


• SEAL & BOND MS 40 ALU is the only ALU-stainless steel colored kit that, when appliedin a thin layer becomes transparent and isclear enough to have the color of theunderlying materials shine through.

• SEAL & BOND MS 40 ALU has a very goodbonding on most current constructionmaterials. Because of this it can also be usedfor the combination of metal with otherconstruction materials.

Product references


539796000 Seal & Bond MS 40 ALU cartridge 310 ml Adhesives and sealants





Seal & Bond MS 40 Trans MS40 Trans

STRONG TRANSPARENT ADHESIVEAND SEALANT FOR EVERY INTERIOR

• Unique transparent bonding on dry as

well as moist surfaces.


• Does not contain any solvents or

isocyanates.

• Does not make any stains on natural

stone.

• Strong elastic bond (22 kg/cm²).

• Can be painted very fast with both

solvent and waterbased lacquers.

General information

SEAL & BOND MS40 TRANS is a strongsealing agent based on hybrid MS-polymer.SEAL & BOND MS40 TRANS is an idealsealing agent.SEAL & BOND MS40 TRANS has goodbonding capacities on most buildingmaterials.

SEAL & BOND MS40 TRANS preventsfungoid growth and bacteria.SEAL & BOND MS40 TRANS does not makeany stains on natural stone.SEAL & BOND MS40 TRANS can be appliedon moist surfaces.


Flow: 5 bar / 3 mm / 23°C 160 g/min.Skin cure: 23°C 50% R.V. 5 minutes.Non-adhering: 23°C 50% R.V. 40 minutes.Full cure time: 23°C 50% R.V. 24 u - 4 mm,48 u - 5 mm, 72 u - 8 mm.Max. allowable deformation: 20% (acc. ISO9046).Expansion joint: ISO 11600 F 20% HM E.Hardness - DIN 53505:40 Shore A.Tensile strength: 220 N/cm².Tear strength - DIN 53507: ca. 40N/cm².Thermal stability: -30°C to +95°C.Peak: 155°C max. 30 min.Volume shrinkage after cure: < 2%.Bonding: excellent on tiles, cement, naturalstone, wood, concrete, aluminium; on PP,PE, PTFE and bitumen no bondingguaranteed.

Elongation after fracture - DIN 53504: >350%.Colour invariability: colour change can becaused by external circumstances.Can be repainted: OK with most solvent- andwaterbased lacquers.Chemical resistance: good: water, seawater,aliphatic solvents, oils, greases, dilutedorganic acids, lyes; moderate: esters,ketones, aromatics; bad: concentrated acids,chlorinated solvents, swimming pool water.Shelf life: 12 months, keep dry, cool andfrost-proof. Safety measures: consult theSafety Data Sheet.


SEAL & BOND MS40 TRANS is the idealtransparent, elastic bonding and sealingproduct to use in the bathroom, kitchen andinterior building. Has a strong bonding onmost materials as natural stone, bricks,concrete, ceramics, enamel, acrylic plastic,porcelain, lacquer, metals, soft and hardwood (excepted PP, PE, PTFE and bitumen).Leaves no traces on natural stone. Does notdammage the silver layer of mirrors.

Remark:SEAL & BOND MS40 TRANS can be paintedwith most current lacquers, but due to thelarge diversity of lacquers, we advise to do atest first. Alkyd resin paints can have anegative influence on the hardening of SEAL&BOND MS40 TRANS. Change of colourscan occur due to external influence, such asUV-light.

Product references


539596000 Seal & Bond MS 40 Trans cartridge 310 ml Adhesives and sealants





Seal & Bond MS 50 2-K MS50 2-K

FAST 2-COMPONENT MOUNTINGADHESIVE AND JOINT SEALER INHANDY 1-COMPONENT CARTRIDGE

• Can be used with a standard silicone

gun.

• Fast curing.

• Super fast full-hardening, to the core,

even in thick layers.

• Very high tensile strength 210 N/cm².

• Replaces screwing and welding while

mounting parts.

• Prevents coorosion and water leaks.

• UV- and weather-resistant.

• Perfect adhesion to most materials

without using a primer.

• Can be painted very fast (after 15

minutes) with both solventand water-

based lacquers.

• Does not contain solvents or

isocyanates.

• Is odourless.

General information

SEAL & BOND MS50 2-K is the newestgeneration of a 2-component system in a 1-component cartridge for bonding and sealingtechniques. SEAL & BOND MS50 2-K has avery fast internal polymerisation withoutshrinkage and meets the highest and mostrecent DIN-norms for garage, industry andbodywork repairs: DIN 53505 and DIN 53507.SEAL & BOND MS50 2-K is UV- andweather- resistant, does not get mouldy andis odourless.

SEAL & BOND MS50 2-K adheres to mostcurrent materials: varnished and galvanizedsurfaces, ferrous and non-ferrous metals,steel, aluminium, lacquer, varnish, polyester,wood and most synthetic materials.SEAL & BOND MS50 2-K can be re-usedafter opening.


Flow: 5 bar / 3 mm / 23°C > 140gr/min.Pot life 23°C: 15 to 30 minutes.Curing time 20°C: primary curing: 1 hour(Shore A: 5); processable: 2-3 hours (ShoreA: 15-2); mechanically resistant: 24 hours(Shore A: >30); fully chemically resistant after7 days.Hardness DIN 53505: 50 Shore A.Tensile strength: 210 N/cm².Tear strength: >73 N/cm² DIN 53507.Ultimate elongation 7 days 20°C: >600%.Thermal stability: -40°C to +95°C (180°Cshortly).Specific gravity: ca. 1.4 +/- 0.1 kg/dm³.

Volume shrinkage after curing: none (<1%).Adherence: to most surfaces.ATTENTION: bad adherence to PE, PRsilicones,Chemical resistance: is resistant to dilutedacids, alkali, aliphatic solvents, oils greases,water and seawater; moderate resistant toesters, ketones and aromatics; not resistantto acids and chlorinated solvents.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


AUTOMOTIVE• bonding and sealing of spoilers, body kits,construction sills,...• ideal for the mounting of cargo platformsand side walls of refrigeration cars, deliveryvans,...• installation of sunroofs• sealing of water leaks in boots• bodywork parts with a covering functioncan be glued. This is completely inconformity with the GOCA standards of thecar inspection PL002-06 under notion III.

INDUSTRY• fast gluing of bullet-proof glass• bonding of mirrors, natural stone,plexiglass, lacquered surfaces,polycarbonate, acrylate, without corrosion orformation of stains• gluing of stainless-steel kitchens,bathrooms and industry• developing and repairing of rubber sealings

Product references


526306000 Seal & Bond MS 50 2-K grey 250 ml Adhesives and sealants

526106000 Seal & Bond MS 50 2-K black 250 ml Adhesives and sealants

529403000 Mixing tips 10 pcs Tools





Seal & Bond MS 60 SBD

HYBRID POLYMER FOR FLEXIBLEBONDING AND SEALING

• Can be used on both dry and wet

surfaces.

• Can be painted after 15 minutes.

• Unique bonding on most materials -

without using a primer: metal, lacquer,

primer, polyester, zinc, aluminium,

wood,...

• Does not contain any solvents or

isocyanats, is odourless.

• Cures without shrinking, resists

vibrations and remains flexible.

• Excellent chemical resistance after

curing.

• High tensile strength and unique

bonding -265 N/cm².

• UV and weather resistant, anti-fungal

and bactericidal.

• Easy to apply and to structure.

• Available in 5 colours: white, black,

beige, grey and brown.

General information

SEAL & BOND MS 60 is a new bonding andsealing technique based on hybrid polymers.SEAL & BOND MS 60 combines theadvantages of mounting, PU and woodadhesives, silicone and sanitary siliconesealants, acrylate and butene rubber sealantsin 1 product.SEAL & BOND MS 60 is a one componentproduct with very fast curing and a uniquebonding capacity. SEAL & BOND MS 60 isUV-resistant, anti-fungal and bactericidal.

SEAL & BOND MS 60 cures shrinkproof,resists vibrations and remains flexible.SEAL & BOND MS 60 has the ISEGA-certificate for use in the food industry.


Flow: 5 bar/3mm/23°C 140g/min.Skin cure: 23°C 50% R.V. 8 minutes.Non-adhering: 23°C 50% R.V. 25 minutes.Full cure time: 23°C 50% R.V. 24 hours - 6mm; 48 hours - 7 mm; 72 hours - 8 mm.Max. allowable deformation 12,5%(according to ISO 9046).Expansion joints for ISO 11600 F 12,5% HME construction.Volume shrinkage after cure: <3%.Hardness - DIN 53505:58 Shore A.Tensile Strength: 265 N/cm².Tear Strength: 140 N/cm² DIN 53507.Adherence: to most surfaces.ATTENTION: bad adherence to PE, PP,silicones,...Thermal stability: -30°C till +95°C.

Short period for powder coating process to200°C.Elongation at rupture -DIN 53504: >350%.Contains no isocyanates: non-toxic.Chemical resistance: good: water, seawater,aliphatic solvents, oils, greases, dilutedorganic acids, lyes; moderate: esters,ketones, aromatics; for more information, seechemical resistance list; bad: concentratedacids, chlorinated solvents.Electrical resistance: 1010Ohm.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


CAR BODY & GARAGE• bonding of body parts: steel/steel withoutusing a primer• joint sealant: sealing of welded and sheetmetal work joints - easy to structure and topaint• bonding of spoilers and extension kits -good adhesion on paintwork and polyester• sealing of water leaks, can be used on wetsurfaces• bonding of several materials. Excellentbonding on metal, primer, paintwork, zinccoating, aluminium, wood, most syntheticmaterialsBUILDING• bonding of insulation, even on wetsurfaces. SEAL& BOND MS 60 does notdissolve polystyrene foam• as mounting adhesive for bonding ofskirting boards, lathing, sidings, eaves, laths,on brick, Gyproc, cellular concrete, Ytong,concrete, mortar,... SEAL & BOND MS 60replaces mechanical attachments as sealantfor both wet and difficult

surfaces. Does not attack natural stone likemarble, Belgian blue stone and granite. Idealas sealant between windows and brickwork.Can be painted perfectly, even with acrylatedispersion paints• windows and verandas: bonding of glass insynthetic and aluminium profiles, bonding ofadhering pieces and corners pieces inproduction of windowsCONSTRUCTION• bonding of ferrous and non-ferrous plateson window works• bonding of mirrors, does not attack thesilver coating (always apply the adhesive invertical lines)• bonding of decorative panels• in the construction of elevators: goodadhesion to painted surfaces• bonding of wooden or metal table tops• bonding of characters and name plates ongravestones and fronts• sealing and bonding of containers



Seal & Bond MS 60 SBDIRCONDITIONING -VENTILATION:• sealing of both PVC and metal tubing, excellentbonding, also on galvanized ductsSANITARY• as sealant, even on wet surfaces. Does notattack acrylate. SEAL & BOND MS 60 is UVresistant, anti-fungal and bactericidal

TIP: For less strong surfaces such as a fewwood species, old bricks, concrete, cellularconcrete,... we advise the use of FIXAPOX.

Product references


530116000 Seal & Bond MS 60 black cartridge 310 ml Adhesives and sealants

530216000 Seal & Bond MS 60 white cartridge 310 ml Adhesives and sealants

530316000 Seal & Bond MS 60 grey cartridge 310 ml Adhesives and sealants

530406000 Seal & Bond MS 60 brown cartridge 310 ml Adhesives and sealants

530906000 Seal & Bond MS 60 beige cartridge 310 ml Adhesives and sealants

530107000 Seal & Bond MS 60 black sausage 310 ml Adhesives and sealants

530207000 Seal & Bond MS 60 white sausage 310 ml Adhesives and sealants

530307000 Seal & Bond MS 60 grey sausage 310 ml Adhesives and sealants

530407000 Seal & Bond MS 60 brown sausage 310 ml Adhesives and sealants

530907000 Seal & Bond MS 60 beige sausage 310 ml Adhesives and sealants







Seal & Bond MS Construct SBC

HIGH-TECH CONSTRUCTIONADHESIVE FOR ADHERING ANDASSEMBLY

• Superior setting.

• Does not sag.

• 1-component MS-Polymer.

• No need for primer anymore.

• Extreme tensile strength 23 kg/cm².

• For indoor and outdoor use.

• Can be applied on humid

background.

• Hardens quickly.

• Can be painted over.

General information

Seal & Bond MS Construct is a high techadhesive kit with an extremely quick and verypowerful setting on the widest range ofmaterials. This solvent and isocyanate-freeassembly adhesive has a very high tensilestrength and does not show signs of ageing.

Seal & Bond MS Construct is neutral andacid-free, and can be used on a variety ofmaterials, even natural stone.Seal & Bond MS Construct allows for 40 mmadhesive strips without any deformation.


Basis: MS-polymer. Colour: Black. Unitweight: 1.5g/cm??Viscosity: Paste.Shore hardness (DIN 53505) after 3 weeks at23°C/50% relative air humidity: 60 shore A.Shrinkage (DIN 52451) < 5%. Consistency(DIN EN 27390): non-sagging up to a 40mmthick jointTensile strength at break: > 450%Module at 100% tensile strength 23°C (DIN53504 S2): lON/mm??Tensile strength (DIN 53504 S2): 2.3 N/mm??Skin formation: +/- 5 min.Hardening speed: 24u - 2.5 mm 48u - 3.5mm.

Temperature limits: -40°C up to +90°C.Application temperature: from +5°C up to+40°C.Chemical strength: good: water, sea water,aliphatic solvents, oils, fats, thinned organicacids and lyesaverage: ester, ketone bodies and aromaticspoor: concentrated acids, chloride solventsperfect: weather resistantNote: Do bonding test first on PE, PP,silicone, teflon,... based surfaces.Stability: 12 months.Security measures: please read the safetysheet.


For very quick assembly of the most variedbuilding, automotive and constructionmaterials.• Always apply on a clean, non-greasysurface, it can even be wet.• Use temperature +5°C up to +40°C.• Surface cleaning and degreasing withMultifoam and Safety Clean.• Apply adhesive on one side by dotting andstrokes.

• Press down firmly on adhesive.• Support is usually unnecessary thanks to itsfast setting (test first).• Adhesive joints can quickly be removedwith Safety Clean.• Adhesive residue can easliy be removedwith Safety Clean.

Product references


531126000 Seal & Bond MS Construct white cartridge 290 ml Adhesives and sealants

531107000 S&B MS Construct black sausage 310 ml Adhesives and sealants

315401000 Seal & Bond Gun sausage 310ml - 18:1 Tools


599307003 Needle adapter nozzle for MS Construct 12 pcs Tools





Seal & Bond MS Screen SMS

HIGH TECH ADHESIVE FORWINDOWS

• Positive Tatcham crash test after 2

hours.

• The number 1 of monocomponent

adhesives.

• To use without primer.

• Very high tear strength and adhesion

on varnish, lacquer, blank metals,

aluminium, coverings with zinc,... (23

kg/cm²).

• Resistant to double airbag.

• Very high rigidity.

• Does not sag out.

• Opened cartridge can be kept

longtime.

• Not yet hardened residues of glue can

be removed easily.

• Can be used manually as well as with

a pneumatic caulking gun.

General information

SEAL & BOND MS SCREEN is a 1-component adhesive, drying by air/airhumidity, based on MS-Polymers.SEAL & BOND MS SCREEN has a fast curingtime.SEAL & BOND MS SCREEN does not need aprimer.SEAL & BOND MS SCREEN has a fast firstbonding and an excellent adhesion onvarnish and white metal, glass, polyvinylchloride, aluminium.

SEAL & BOND MS SCREEN has a high tearstrength and has no signs of old age.SEAL & BOND MS SCREEN is easy to useand doesn't need pre-heating as the well-known high module products.


Base: high tech polymer.Color: black.Specific gravity: 1.5g/m².Viscosity: paste.Shore hardness (DIN 53503): 50 Shore AAfter 3 weeks at 23°C / 50% relative airhumidity.Shrinkage (DIN 52451): < 5%.Density (DIN EN 27390): does not sag outuntil 40mm joint.Elongation after fracture: > 450%.Module by 100% elasticity: 1.0 N/mm² 23°C(DIN 53504 S2).Tear strength (DIN 53504 S2): 2.3 N/mm²Skin formation: +/- 5 min.

Full-hardening : 24h. - 2.5 mm; 48h. - 3.5mm.Full cure time: 6 hours at 23°C with a R.A. of50%.Temperature resistance: -40°C - + 90°C.Application temperature: min. +5°C - max.+40°C. it is not advisable to use a 1-component adhesive at temperatures lowerthan 5°C.Chemical resistance: good: water, salt water,alfatic solvents, oil, grease, diluted organicacids, leach; moderate: ester, ketone andaromatics; bad: concentrated acids,chlorated solvents; perfect: weatherproof.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• remove at least a part of the oldwindscreen adhesive;• degrease the adhesive surface withNOVATIO SAFETY CLEAN and blow dry;• clean the windscreen with NOVATIOSATETY CLEAN and NOVATIO MULTIFOAM:spray, wipe with a cloth and wipe off with acloth clean;

• apply SEAL & BOND MS SCREEN equallyto the vehicle or on the window;• Open the windows, place the windscreen,press, correct and apply more pressure ifnecessary (within 2 minutes).

Product references


537296000 Seal & Bond MS Screen cartridge 290 ml Adhesives and sealants





Seal & Bond MS32 Isolation MS32

INSULATING MASTIC

• Very well suited for passive home

building.

• Adheres and seals.

• Thermally insulating.

• Noise- and vibration-absorbent.

• Absorbs no water.

General information

SEAL & BOND MS32 ISOLATION is a masticbased on MS polymers with a closed cellstructure so no moisture is absorbed.SEAL & BOND MS32 ISOLATION is free ofisocyanates, solvents and silicones, withmoisture curing, odourless and neutralpolymerisation.SEAL & BOND MS32 ISOLATION is alightweight insulating adhesive/sealant with avery low density of 0.4g/cm³.

SEAL & BOND MS32 ISOLATION is used if incombination with a sealant or adhesivethermal insulation and noise-and/or vibration-absorption is required.


Colour: white.Chemical resistance: good: water, aliphaticsolvents, oils, fats, diluted inorganic acidsand lyes;moderate: esters, ketones and aromaticcompounds; not resistant to concentratedacids and chlorinated hydrocarbons.Shore A hardness (DIN 53505): 32 after 3weeks at 23°C/50% HRModulus with 100% stretch (DIN 53504 S2) ≥0.8 N/mm² and 23°C.Stretch with breakage (DIN 53504 S2) ≥100%.

Tensile strength (DIN 53504 S2) ≥ 1.0 N/mm².Heat conduction capacity 0.063 W/mK.Hardening after 24 hours: ≥ 3.5 mm at 23°C/50% RH.Hardening after 48 hours: ≥ 5.5 mm at 23°C/50% RH.Temperature for use: +5°C to +40°C.Shelf life in sealed packaging: 12 monthskept in a cool, dry and frost-free place.safety measures: please see the safety sheet.


Applications:- Absorbs vibrations of moving elementssuch as ventilation appliances, air-conditioning units, air ducts, heat pumps,etc.- Elastic sealing of insulation, sheeting, etc..- Under window sills, roller-shutter housings,doors, etc. .For the corner fastening and finishing of PUinsulating sheets, prevents condensationpenetration.

Instructions for use:- Apply to a clean and stable surface, cleanand degrease if necessary with Safety Cleanand/or Multifoam.- Using Seal&Bond Special Primer or SpecialPrimer PPE is recommended on difficultsynthetic materials.- SEAL & BOND MS32 ISOLATION can bepainted over. If in doubt first test the paint.

Product references


533828000 Seal & Bond MS32 Isolation sausage 600 ml Adhesives and sealants


315500000 Seal & Bond Gun sausage 600ml - 18:1 Tools



Seal & Bond Sealtrans STS

TRANSPARENT, FLEXIBLE SEALINGCEMENT WITH GOOD ADHESIVEQUALITIES

• Contains no plasticizers.

• Safe to use on natural stone.

• Very high elasticity: 480%.

• Bonds without primer to most

materials: natural stone, brick,

concrete, ceramics, enamel, acrylate,

porcelain, metals, glass, soft and hard

wood,...

• Excellent resistance to fungal growth.

• Brilliant, dirt-repelling joints with

excellent UV-resistance.

• Easy to squeeze and to handle.

General information

SEAL & BOND SEALTRANS is a recentlydeveloped single component synthetic

rubber polymer based on siloxanes forelastic, transparent sealing.


Character: elastic synthetic rubber based onpolysiloxanes.Consistency: paste-like.Colour: transparant - brilliant.Shrinkage: according to DIN 52451 < 1%.Sagging out: according to ISO 7390 less than1 mm.Max. permitted tranformation: 25% - durable.Shore hardness W: 24 Shore A - accordingISO 868.Tensile strength: 130 N/cm².Elongation at rupture: 480%.E-modul: 100% 0.3 mPa.

UV-resistance: excellent.Fungicidal: according to ISO 846.Painting: CAN NOT be painted.Curing: 2 mm / 24 hrs / 23°C 50% R.H.Finish: 5 min. 23°C / 50% R.H.Thermal stability: -45°C to +155°C.Volatile organic compounds (VOC): 0,02%.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• applicable where elastic, transparent jointsare required.• very appropriate for sealing "problematic"surfaces such as natural stone and acrylate,due to its composition free of plasticizers.• ideal transparent sealant for use in interiorconstruction, verandas, windows and doors,kitchens and bathrooms as well as in generalmaintenance.

• excellent adherence to most surfaces foundin the building industry, e.g.: natural stone,brick, concrete, ceramics, enamel, acrylate,porcelain, metals, glass, soft and hardwood ... with the exception of PE - PP -Teflon and bitumen.

Product references


539096000 Seal & Bond Sealtrans 310 ml Adhesives and sealants




Seal & Bond Sil 25 SIL25

HIGH CHEMICAL AND FUNGALRESISTANT, FLAME RETARDANTSEALING KIT

• Fire resistance class of F90 officially

tested according to DIN

4102-2:1997-09.

• Tested by IBMB - Institut fur

Baustoffe Massivbau und

Brandschutz.

• High chemical resistance.

• Can be used to seal expansion joints,

seams, cracks and passages,... in a

constructional and flexible way.

• Adherence > 10 kg/cm².

• Adheres perfectly to many surfaces,

such as metal, ceramics, tiles,

stainless steel, glass, wood,... without

a primer.


• Practically odourless.

General information

SEAL & BOND SIL 25 is a flame retardantsingle component silicone sealant, whichhardens by humidity, with a fire resistanceclass of F90 according to DIN4102-2:1977-09, tested by IBMB - Institut furBaustoffe, Massivbau und Brandschutz.SEAL & BOND SIL 25 has a neutralhardening procedure and is practically

odourless.SEAL & BOND SIL 25 can be used to sealexpansion joints, seams, cracks andpassages,... in a constructional and flexibleway.SEAL & BOND SIL 25 is fungus, UV andweather resistant.


Density: ca 1.4 kg/dm³.Shore A hardness: ca 19 till 25.Coexistence: thixothrope - firm in joints up to40 mm width.Skin formation at 23°C and 50 % R.H.: 8minutes.Hardening at 23°C and 50% R.H. 2.5 mmafter 24 h - 4 mm after 48 h.Modulus 100% elongation: 0.3 to 0.4 N/cm².Adherence: > 10kg/cm².Temperature resistance: -40°C to +150°C.Colour: grey and white.Chemical resistance: resistant to water,seawater, weak solvents, oils, fats,likewise to

ethyl alcohol, isopropanol, chlorine, acetone,hydraulic oil, formic acid 10%, hydrochloricacid 10%, sulphuric acid 25%, phosphoricacid 5%, ammonia 25%, saturated sodiumchloride, caustic soda 15%, potassiumhydroxide 15%, saturated sodium chloride,ammonium sulphate 50%; not resistant toconcentrated acids.Painting: can not be painted.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• versatile joining, bonding and sealing masswith fire-retardant features• because of its high chemical resistance, itcan also be exposed on a permanent

basis to water and humidity like e.g.swimming pools, Jacuzzi, shower andbathroom applications, air conditioningsystems, kitchen building,...

Product references


540206000 Seal & Bond Sil 25 white 310 ml Adhesives and sealants

540306000 Seal & Bond Sil 25 grey 310 ml Adhesives and sealants




Seal & Bond Spray SBS

THE NEWEST GENERATION OFHYBRID POLYMERS FOR BONDINGAND SEALING THAT CAN BESPRAYED, USED WITH A SPATULAOR A BRUSH

• Extremely strong adhesion on most

materials, without using a primer.

• Easy to process and to structure.

• Can be painted, even wet on wet.

• U.V.- and weather resistant.

• Decrease of vibrations and sound

transmission.

• Good chemical resistance after

curing.

• Builds a flexible, tough and scratch-

resistant layer.

• Can be applied as well on dry as on

humid surfaces.

General information

SEAL & BOND SPRAY is a unique glue whichcan be used with a spatula, a brush or asprayer and based on high-grade hybridpolymers.SEAL & BOND SPRAY remains flexible anddries by air humidity, without releasingisocyanates.

SEAL & BOND SPRAY is simple to apply andstructure with the NOVATIO MASTERGUN.SEAL & BOND SPRAY can be repainted veryquickly, even "wet on wet.' No irritatingsolvent odour.


Viscosity: sprayable paste.Scin cure: 20 min. at 23°C.Full-hardening: 3 mm in 24 h (23°C); 5 mm in48 h (23°C).Hardness shore A: 45.Elongation after fracture: 450%.Tensile strength: 70 N/cm².Temp, resistance: -40°C to +90°C - peak140°C.

Specific gravity: 1,38.Colour: beige + black.Shelf life: 12 months, unopened at a temp, of5°C up to 25°C.Keep dry, cool and frost-proof. Safetymeasures: consult the Safety Data Sheet.


• for bonding parquet on flooring tile,concrete,...• for bonding tiles on tiles, novylon andcarpet on tiles,...• for bonding aluminium on glass, aluminiumon wood (always roughen the aluminiumthoroughly)• polystyrene can be glued on wood byspraying the SEAL & BOND SPRAY

• bonding plumb on other building-materials• insulation between 2 different components• as sound insulation of engine rooms,...• bonding of decorative wall and carpetscovering

Product references


536510130 Seal & Bond Spray beige 290 ml Adhesives and sealants

536520130 Seal & Bond Spray black 290 ml Adhesives and sealants





Seal & Bond Sticky Seal SSS

LONG-LASTINGLY PLIABLE ANDSTICKY SEALING PASTE

• Easy to apply and easy to remove.

• For sealing between metal, glass,

plastic, wood, and other materials.

Also safe on varnishes.

• UV and weather resistant.

• Watertight and airtight.

• Low odour.

• Stable with ageing.

General information

SEAL & BOND STICKY SEAL is a long-lastingly pliable and sticky sealing kit formaking automotive, heavy duty, construction,and industrial applications watertight andairtight. Due to its excellent UV and weatherresistance, STICKY SEAL is ideally suited forroof and sunroof applications and ispermanently removable.

STICKY SEAL is also useful for affixing doorfoils, and sealing rear lights, cablefeedthroughs, and rubber seals.


Base material: polyisobutylene, syntheticresins, mineral fillers, and solvents.Form: paste.Colour: black.Stable form: after evaporation of thesolvents.Specific gravity: 1.4 g/cm³.Open time (20°C/50% relative humidity):approx. 3 hours.Solvent percentage: approx. 11%.Temperature resistance: -30°C to 100°C.

Application temperature: from +5°C to +35°C.UV resistance: high. Weatherfastness: high.Paintable: no.Shelf life: 12 months; store in a dry, cool, andfrost-free place.Safety measures: please consult the safetycard.


• For air and waterproofing overlappingparts, threaded joints, sunroofs, domes,electrical components, light boxes, lights,rear lights, etc.• Attaching door foils.• For window and door installation.• Sealing glass in rubber, in buses, trucks,trains, cars, etc.• Remedies and prevents creaking andsqueaking in, for example, dashboardcomponents, piping, etc.

Instructions for use:• STICKY SEAL adheres withoutpretreatment to clean, fat-free, grease-free,and dry substrates such as most metals,powder coating, varnish, paint, glass, PVC,polyester, wood, etc. Also applicablebetween polyethylene and polypropylene.• Apply STICKY SEAL between the materials,join the parts together, press, and smoothdown.• Any excess STICKY SEAL can be dabbedaway easily after a few minutes with STICKYSEAL.• The material can be cleaned if necessarywith SAFETY CLEAN.• STICKY SEAL remains slightly sticky afterevaporation of the solvents.

Product references


604006000 Seal & Bond Sticky Seal cartridge 310 ml Adhesives and sealants



Silfix SIX

FOR STRONG AND FAST BONDIN OFDIFFICULT MATERIALS

• Bonds most nitril, neoprene, silicone

rubbers, ABS, PVC, metals,

polypropylene, polyethylene,

polyolefine, even PTFE, etc.

• Very high tensile strength.

• Transparent joints.

• No measuring, weighing or mixing.

General information

SILFIX is a cyanoacrylate with low viscositythat in combination with SILFIX Primer bondsthe most difficult materials.The SILFIX set contains SILFIX adhesive

and SILFIX primer, which do not have to bemixed. The hardening process of SILFIX isvery fast.


Reaction time: for most plastics < 2 sec; formost rubbers < 4 sec; for metals < 5 sec.Usage: 1 drop => 25 mm².Content: 20 g => 200 drops.Resin / main ingredient: modified Ethyl Ca.Colour: transparent.Hardening time: 1 - 5 sec.Viscosity: 20 c.p.s..Filling capacity: 0,1 mm.

Flashpoint: >85°C.Specific gravity: 1,06.Temperature resistance: -60°C till +90°C.Complete hardening: 24 hours.Tensile strength: 25-30 N/mm².Shear strength: 15 N/mm².Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• repair of plastic toys• photo frames• air fresheners• decorative panels on furniture (P.P.)• PP tool handles on metal• bonding of polyurethane cord• assembling of polyurethane parts• plastic bearings on axles

• rubber profiles• bonding of plastic gearwheels or pulleys onmetals or synthetic materials• silicone rubbers• O-rings• gluing polyamides, including nylon• glue residues can be removed with AL-FIXREMOVER

Product references


502003000 Silfix 20 g Adhesives and sealants

502100000 Silfix Primer 50 ml Adhesives and sealants

502120000 Silfix + Silfix Primer 20g + 50ml Adhesives and sealants



Tire Sealant TRS

LIQUID RUBBER TO SEAL TIREBEADS OF TUBELESS TIRES

• Black sealant on the basis of rubber.

• Seals holes in wheel rims due to

damage or oxidation.

• Apply to the tire and not to the wheel

rim.

• Simple to apply to the tire bead.

• Adapts to each shape and seals

immediately.


General information

TIRE SEALANT is a black sealant based onrubber and is developed specially for solvinga lot of sealant problems.TIRE SEALANT is the ideal solution for strongleaks between tubeless tires and wheel rims:for private cars, truck, busses,motorcycles, ...

TIRE SEALANT sticks to the tire and not tothe wheel rim, so that the dismantling is easy.


• clean the tire bead and the wheel rim with aclean cloth, moistened by Novatio SafetyClean;• apply a small layer of the TIRE SEALANT tothe tire bead. You can use the brush which isattached to the cap. For larger damages youneed to apply a second layer;

• let is dry for +/- 5 minutes;• mount the tire, inflate the tire to the righttension and check for leaks.

Product references


711000000 Tire Sealant bottle 950 ml Adhesives and sealants



Transfix TIX

UNIQUE TRANSPARENT PASTY GLUEFOR BONDING AND REPAIRING WITHVERY HIGH ELASTICITY (700%)!

• Remains flexible, also at extreme

temperature fluctuations - even on

polypropylene (without primer).

• Bonds on both porous and polished

surfaces.

• Can be painted.

• Polymerizes at ambient temperature.

• Can be used under water.

General information

TRANSFIX is a single component transparentpaste, curing at ambient temperature.TRANSFIX adheres to most commonmaterials, such as metal, wood, glass,leather, linen, canvas, vinyl and evenpolypropylene.TRANSFIX provides, after curing, a cleartransparent adhesive or sealing joint withexceptional flexibility and elasticity.

TRANSFIX is therefore very appropriate forbonding, sealing or repairing of materialshaving a different coefficient of expansion.


Hardness: 75-85 Shore A.Tensile strength: 21 N/mm².Elongation: 700%.Dielectric resistance: 500 Volt/mm (25Micron).Temperature resistance: -84°C till +100°C.Working time: 10 minutes.Curing (20°C): 8 hours - 70%; 24 hours-100%.Chemical resistance: excellent-nitric acid (20%)-acetates (10%)-sulphuric acid (10%)

-lactic acid (5%)-hydrochloric acid (20%)-boric acid-alcohols-food-oils-seawater-phenolsShelf life: 12 months, in sealed package,keep dry, cool and frost-proof.Safety measures: consult the Safety DataSheet.


• repair of tarpaulins• repair of seat upholsteries• connecting of materials with a differentcoefficient of expansion• repair and sealing of flexible pipes in PVC,polypropylene, rubber or vinyl

• repair of holes and cracks in syntheticfabrics (rubber dinghies, nuoys, rainproofclothing)• application for electrical insulation

Product references


505020000 Transfix 95 ml Adhesives and sealants



Trimfix TFX

THE VERSATILE SPRAY-ONADHESIVE

• Ideal for bonding of large surfaces.

• No spreading - no brushing out - no

stringing - does not drip.

• Heat, cold and moisture resistant, and

does not dry out.

• Ideal for non-permanent gluing.

General information

TRIMFIX is an air spray adhesive based onsynthetic rubber.TRIMFIX offers a wide variety of applications.TRIMFIX bonds durably, quick and withoutany strings or dripping.

TRIMFIX is appropriate for bonding largesurfaces where a thin and transparent glue isrecommended.


Basis: synthetic rubber in a solution.Specific weight: 0,77 kg/dm³.Solid materials: 22,5 - 24,5%.Viscosity: 100-300 Cps at 20°C.Colour: milky white.Drying time: ca. 5 minutes at 20°C.Open working time: max. 45 minutes.Temp, resistance: 80°C constant - peak load:100°C.

Consumption: 1,5 to 2 m2 per aerosol (one-sided).Detergent: NOVATIO SAFETY CLEAN.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet


• is suitable for gluing: paper, textile,cardboard, foam plastics, polyurethane, cork,polystyrene, felt, vinyl, plastic foil,

reproductions... to glass, metal, ceramics,wood, concrete, …

Product references


511001000 Trimfix 500 ml Adhesives and sealants



Trimfix PS TFX PS

TEMPORARY AND MOVABLE GLUING

• Attaches to the material.

• Paper does not become soaked or

misshapen.

• Treats up to 13m².

General information

TRIMFIX POST STIK is a clear elastomer-based glue for temporary and/or movableapplications.TRIMFIX PS attaches to the material so evenpaper does not become soaked andmisshapen.

Depending on the material and method ofapplication one spray can coversapproximately 13m². Temperature resistancefrom -20°C to +65°C.


Flashpoint: -41°C.Ignition temperature: 235°C.Vapour pressure at 20°C: 5,000 hPa.Density at 20° C: 0.699 g/ml.Water-soluble: insoluble.

Shelf life: 12 months kept dry, cool and frost-free.Safety measures: please see the safety sheet.


Applications:When TRIMFIX PS is applied thinly andsingle-sided to paper, cardboard, foil, etc. itis easy to remove and/or move withoutleaving marks. Ideal for adhering promotionaland other posters, photographs, templates,fair decoration, designs, graphic work, plans,etc.

Instructions for use:Shake before use and apply a thin coat to adry, clean and grease-free surface.Depending on the surface and temperatureallow the glue to dry for about ten minutes. Bring the material into position and press.For permanent adhesion apply TRIMFIX PSthickly or on the two contact surfaces. Afteruse briefly spray upside down to empty thenozzle. Glue residues can easily be removedwith safety clean.

Product references


511005000 Trimfix PS aerosol 500 ml Adhesives and sealants



Trimfix WT TFX-WT

HIGH-TECH VAPORIZABLE GLUEWITH SPECIAL WEB-TECHNOLOGY

• Resin/rubber adhesive based on an

organic solvent that bonds very

strongly and immediately.

• Spray pattern width is variable from

2,5 cm to 12 cm.

• Can bond most materials to each

other.

• For permanent or non-permanent

bonding.

• Heat-, cold- and moisture-resistant.

General information

TRIMFIX WT is a high tech spray adhesive inaerosol, based on synthetic rubber. It standsout for its special web-technology (WT).Through the combination of the adhesive andthe special spray nozzle it can be sprayed ina web-structure, which delivers very goodresults on rough surfaces.

TRIMFIX WT is ideal where sprayingequipment, a brush or other applicationtechniques can't be used.


Basis: synthetic rubber in a mixture oforganic solvents.Specific weight: 0,8 kg/litre.Solid materials: 15 % +/-1%.Colour: yellow-transparent.Drying time: between 10 and 60 minutes.Open working time: max. 3 minutes.Temperature resistance 50°C constant -peak: 100°C.Consumption: 5 to 6 m² for a

light connection.Packaging: aerosol 400 ml.Cleaning agent: NOVATIO SAFETY CLEAN.Spray width is variable from +/- 2,5 cm till 12cm.Shelf life: 12 months, keep dry, cool andfrost-proof.Safety measures: consult the Safety DataSheet.


• TRIMFIX WT is suitable for bonding ofpaper, textile, cardboard, foams,polyurethane foam, cork, polystyrene, felt,vinyl, plastics, reproductions, glass fibre,Armaflex,... to each other or to surfaces likeglass, metal, ceramics, wood, concrete, wallfixture, fibreboard,...

TRIMFIX WT can be used in:• cladding or related sectore• textile-covering-furniture-interior design• stand construction, car repair, packaging,labelling,...• not suited for the bonding of PVC films orfor applications above 50°C where peelingforces occur

Product references


511002000 Trimfix WT 400 ml Adhesives and sealants


Documents

Liimaus ja tiivistäminen binder2