Upload
dotuyen
View
215
Download
0
Embed Size (px)
Citation preview
Limit switch MP800
http://www.microprecision.ch/index.php?option=com_content&view=article&id=68&Itemid=69[2013-06-11 5:34:42]
Designed by LMWEB Solutions Internet.
Home
|
Limit switch MP800 The family MP800 of safety and limit switches with their metal or plastic housing are ideally suited toapplication where precise shutdown is required. For example when the positions of doors and accesshatches are monitored.They can be used in safety circuits as the NC contact is positively-opening in compliance with IEC 60 947-5-1.
Descriptions
MP800-MP810-MP850 MP820-MP830-MP870Approval IEC 947-5-1
Housing Thermoplastic Metal
Mechanism Forced breakSlow action - Snap action
Forced breakSlow action - Snap action
Circuit 1NO + 1NC / 2NC / 2NO+1NC / 1NO+2NC / 3NC
Termination PG13.5 / 1/2" NPT / PG11 / M16 / M20
Actuator Variety of operation heads
Degree of protection IP65 IP66
Power rating AC-15 3ADC-13 0.27A
Thermal current 10A 10A
Dimensions EN 50 047 30 mm / 50 mmEN 50 041 40 mm
Operating temperaturerange
-25C to +70C
Mechanical life 30 x 106
Datasheet MP800.pdf
Microprecision Electronics SA - Wilbrecht Ledco Inc.
Home About us Products News Contacts Download
http://www.lmweb.ch/http://www.microprecision.ch/en/component/content/42-switches/68-serie-mp800.html?tmpl=component&print=1&page=http://www.microprecision.ch/en/component/mailto/?tmpl=component&link=3a19b4de2fb3ab17d4e244fda52f90a1ace684a0http://www.microprecision.ch/images/PDF/MP800_E.pdfhttp://www.microprecision.ch/index.php?lang=frhttp://www.microprecision.ch/index.php?lang=dehttp://www.microprecision.ch/index.php?lang=enhttp://www.microprecision.ch/index.php?lang=ithttp://www.microprecision.ch/index.php?lang=zhhttp://www.microprecision.ch/index.php?lang=eshttp://www.microprecision.ch/http://www.microprecision.ch/http://www.microprecision.ch/index.php#http://www.microprecision.ch/index.php#http://www.microprecision.ch/index.php#http://www.microprecision.ch/index.php#http://www.microprecision.ch/index.php#http://www.microprecision.ch/index.php#http://www.microprecision.ch/en/distributors.htmlhttp://www.microprecision.ch/en/distributors.htmlhttp://www.microprecision.ch/index.php#http://www.microprecision.ch/index.php#
MP800
Safety andlimit switches
If your applicationdepends on it
Microswitches and sealed position switches
Plastic or metal case
IP65-66 protection 30 mm, 40 mm or50 mm case width
Forced break switches with slow action or snap action
SERIES
Series MP800The family MP800 of safety and limit switch-es with their metal or plastic housing are ideally suited to application where precise shutdown is required. For example when the positions of doors and access hatches are monitored.They can be used in safety circuits as the NC contact is positively-opening in compli-ance with IEC 60 947-5-1.
Major specifi cations
Metal or plastic housing Forced break switch with slow
action or snap action IP65 or 66 protections Positive opening operation
for NC contacts Standards: UL CSA Large selection of actuating heads
General technical data
MP800-MP810-MP850 MP820-MP830-MP870
Housing Plastic Metal
Standards device conforms with IEC 947-5-1 IEC 947-5-1
Operating temperature -25C to +70C/-13F to +158F -25C to +70C/-13F to +158F
Degree of protection IP65 IP66
Mechanical life up to 30 millionoperations
up to 30 millionoperations
Switching frequency 3600 operations per hour 3600 operations per hour
Switching mechanism forced break slow action or snap action
interruption forceslow action or snap action
RATING
Conventional thermal current
10A 10A
Short circuit protection 10A 10A
Rated operational current
240VAC 250VDC
AC-15 3ADC-13 0.27A
AC-15 3ADC-13 0.27A
MP800
MP810 MP820 MP830
MP850
MP870
MP8 0 0 - 0 - 0 0 0 0
Case
EN 50 047
0 plastic 30 mm1 plastic 50 mm2 metal 30 mm3 metal 50 mmEN 50 041
5 plastic 40 mm7 metal 40 mmOpening
1 PG 13.52 1/2 NPT, with optional adapter (MP 810)3 PG 11, only for EN 50 0474 M16, only for EN 50 0475 M20Switching Block
1 Snap-action, 1NO+1NC2 Snap-action, 2NC3 Slow-action, non-overlapping, 1NO+1NC4 Slow-action, overlapping, 1NO+1NC5 Slow-action, 2NC
EN 50 041
6 Slow-action, non-overlapping, 2NO+1NC7 Slow-action, non-overlapping, 1NO+2NC8 Slow-action, simultaneous, 3NCActuator
See pictures
Dimensions (in mm)
EN 50 041
Dimensions (in mm)
EN 50 047
T38
E99F43
H44E44
F46
T45F45
T51F51H51E51
T92H92E92
T98T71F71H71E71
T91H91E91
K20 K97K40K96K61 K30K72K120
2 3 4 5 6 7
T42F42H42E42
T11F11H11E11
T12F12H12E12
H13E13
T30 T34T31H31E31
E21 T41F41H41E41
E22
MP8 0 0 - 0 - 0 0 0 0
Case
EN 50 047
0 plastic 30 mm1 plastic 50 mm2 metal 30 mm3 metal 50 mmEN 50 041
5 plastic 40 mm7 metal 40 mmOpening
1 PG 13.52 1/2 NPT, with optional adapter (MP 810)3 PG 11, only for EN 50 0474 M16, only for EN 50 0475 M20Switching Block
1 Snap-action, 1NO+1NC2 Snap-action, 2NC3 Slow-action, non-overlapping, 1NO+1NC4 Slow-action, overlapping, 1NO+1NC5 Slow-action, 2NC
EN 50 041
6 Slow-action, non-overlapping, 2NO+1NC7 Slow-action, non-overlapping, 1NO+2NC8 Slow-action, simultaneous, 3NCActuator
See pictures
Actuators
Limit switches
Key No 1
T Plastic case EN 50 047F Metal case EN 50 047H Plastic case EN 50 041E Metal case EN 50 041K Safety limit switch
Positively-opening acc. to IEC 60 947-5-1
Safety limit switches
Operating keys (to be ordered separately)
Key safety switch Shaft safety switch Z lever safety switch
MP800 position switchesIdeally suited for rugged industrial applications
Wide product range
With a wide range of actuators in line with the functions that are required in the fi eld, the MP800 position switches can be used to: Monitor protective devices with hinged joints,
such as swivelling doors, hatches, covers, etc. Monitor protective devices which can be moved sideways, such as sliding doors, protective gates, etc.
Detect hazardous machinery motion; dimensions, mounting locations and characteristic values, are to a large extent, in conformance
with EN 50 041 and EN 50 047.
Positively-openingcontacts(IEC 60947-5-1)
Positively-opening NC contacts are expressly specifi ed for the electrical equipment of machines. This is designated using the symbol in compliance with IEC 60 947-5-1 (personnel protection function).Safety is done on contacts NC.
Examples of applications
WW
W.S
TLD
ES
IGN
.CH
Trust more than 50 years of experience!
Companies, whose activities encompass such different areas as food pro-cessing, chemicals, machine-tools, transport, etc., have long been placing their trust in Microprecision Electronics SA; indeed, they have found them to be a fi rst-class and reliable partner, able to supply tailor-made products which meet international standards.
56 basic types of switches and more than 1000 possibilities let to you foresee the number of possible applications in industries where a harsh environment requires the highest technological competences.
Microprecision Electronics SA has set itself the task of listening to its clients expectations so that it can provide them with tailor-made solutions from the production of small runs.
For more information, please contact one of our resellersor visit our website: www.microprecision.ch
MICROPRECISION ELECTRONICS SAP.O. Box 160 Route de lIndustrie 27CH - 1896 VOUVRY SWITZERLANDTel: +41(0)24 481 43 43 Fax: +41(0)24 481 43 [email protected] www.microprecision.ch
D04/E
Limit switch MP800.pdfwww.microprecision.chLimit switch MP800
J0aWNsZSZpZD02OCZJdGVtaWQ9NjkA: form1: searchword: search...