Lindab | we simplify construction - Flexibility when it is needed... Premum & Premax With unique JetCone and Angled Nozzles Patent pending solution

lindab | we simplify construction

- Flexibility when it is needed...

Premum & Premax

With unique

JetCone and Angled Nozzles Patent pending

solution


• JetCone– Adjust air volume and distribution profile without any tools – Patent pending regulation system

• Angled Nozzles– Offers a pre-set air pattern combined with JetCone air volume– adjustment and distribution profile

• Market leading cooling performance (Premax)– High cooling capacity, still not creating any draught problems

• Flexible installation– Available in many different dimensions to suit all applications– Suitable for any ceiling type

• AirGuide (plus feature)– Adjust and optimize air pattern without any tools, also for future changes– Ensure optimal distribution and eliminate draft all lifetime– Patent pended regulation system

• Many functions available– Supply air, exhaust air, cooling, heating and regulation

Headlines

T24-Lay-in

Edge D (Hidden grids)


• JetCone system– Adjusting air volume, air pressure and air pattern– 4 individually adjustable setting points– 10 steps/point– 40 different combinations

• Angeled Nozzles– Pre-set air spread pattern– Combined with JetCone system– Standard 30º, 16º and 0º

• High cooling capacity– Market leading cooling performance with outstanding

indoor climate (Premax)

• AirGuide (Plus feature)– Adjusting air pattern– 4 individual adjustable rows of deflectors, 2 on each end– Each row of deflectors has 2 adjustment points, 1 in each end– 4 steps/point equals 32 different settings

Full control – Maximum performance


• Base dimensions– Width: 600 mm– Length: 1.2 - 3.0 m in steps of 0.1m– Height: only 200 mm

• Premum models for different ceilings– I – Integrated– X – Ecophon edge DS, hidden T-bar and other types

• Connection type– Air: A, B, C, D– Water: 1, 2, 3, 4, 7, 8– Heating (optional)– Exhaust (optional, result in shorter coil)

Models and types

Premum

Installation instruction

http://itsolution.lindab.com/lindabwebproductsdoc/pdf/documentation/comfort/lindab/mounting/premum_mounting.pdf

http://itsolution.lindab.com/lindabwebproductsdoc/pdf/documentation/comfort/lindab/mounting/premum_mounting.pdf


• Base dimensions– Width: 600 mm – Length: 1.2 m, 1.8 m, 2.4 m and 3.0 m– Height: only 200 mm

• Premax models for different ceilings– I – Integrated– X – Ecophon edge DS, hidden T-bar and other types

• Connection type– Air: A, B, C, D– Water: 1, 2, 3, 4, 7, 8– Heating (optional)– Exhaust (optional, result in shorter coil)

Models and types

Premax

Installation instruction

http://itsolution.lindab.com/lindabwebproductsdoc/pdf/documentation/comfort/lindab/mounting/premax_mounting.pdf

http://itsolution.lindab.com/lindabwebproductsdoc/pdf/documentation/comfort/lindab/mounting/premax_mounting.pdf


• Supply air (Standard)– A, B, C, D

• Exhaust air (optional)– E, F, G, H

Possible connections Supply air


• Cooling (Standard)– 1, 2, 3, 4, 7, 8

Possible connections Water


• Cooling / Heating (optional)– 1, 2, 3, 4, 7, 8

Possible connections Water Cooling and Heating


• Pre-set air pattern known from Professor beams with 30º, 16º and 0º.

• Standard combination with JetCone air regulation system guarantee draft free Environment

• Simple yet effective way of creating a divergent air spread pattern without loss in capacity.

• In order to meet special demands the Angled Nozzles can be delivered in other configurations.

• Standard settings: – 30º (= AirGuide 30º - 10º) default– 16º (= AirGuide 20º - 10º)– 0º (= AirGuide 10º - 10º)

• (Higher capacity then with AirGuide system (+ 6 %))

Pre-set air distribution

Angled Nozzles


Angled NozzlesPosition 0.Max closed nozzle, 20% air flow.

Position 9.Max open nozzle, 100% air flow.


long

0°

short

30°

Pre-set air pattern

Angled Nozzles


• Adjustable air volume and pressure

• Adjustable air distribution

• Linear air distribution scale

• Optimizing of power performance

• No need of tools

• Accurate adjustment in four points

• 10 steps at each adjustment point

• Total 40 different air volume settings

• No need of dampers

• Easy, fast and cheap balancing

Air regulation system

JetCone


4-point air volume regulation

JetCone

09

2 steps up

2 steps down


• The air volume is regulated by decreasing / increasing the outlet area of the nozzle

• The decreasing of open area occur by vertical movement of the JetCone through the nozzle

JetCone


• Easy and simple adjustment, as known from Lindab Plexus.

Adjustment

JetCone


Adjusting air flow

JetCone

4 4

4 4

8 0

0 8

2 5

3 6

4 + 4 + 4 + 4 = 4 0 + 8 + 0 + 8 = 4 2 + 3 + 5 + 6 = 4


• Easy AirGuide adjustment between 0, 10, 20 and 30 degrees

• AirGuide default factory set 30°-10°

• Optimize the local working space

• Optimize air pattern when placing beams close to each other

• Optimize air pattern for your special application

Worth noting:

AirGuide set to 0° offers extra capacity (= 6%) without spreading the air (0°, longest throw length); same with Angled Nozzles.

AirGuide system


• Flexible control of the air pattern

• Optimizing the possibility of placing beams close to each other

• Fast and easy adjustment, without any tools

• Accurate adjustment in eight points and 32 steps

• Easy to control Air pattern

• Lower capacity then with Angled Nozzles system (-6 %)

AirGuide system (plus feature)

10°- 10°30°-10°


Adjusting air pattern

AirGuide

long short

10°- 10° 30° - 10°


• Battery and air duct is accessible for cleaning easily

• Coated sheet metal ensures easy cleaning

• Down foldable battery available as an plus feature

Hygienic design


• Regula Combi– Room regulator, integrated or loose

• Integrated valves and actuators

• Regula Secura– Condensation guard, integrated

• Regula Connect– Wiring connection system, integrated

Regulation (plus features)


• Great Air volume performance, 5 – 66 l/s

• Outstanding air volume accuracy (regulated by the JetCone system, total of 40 steps)

• Supreme power performance at high air volumes, 5 - 20 % higher capacity than competitors (Premax)

• Simple adjustment for changed working conditions in pressure and air flow (tool free)

• Flexible sizing and installation options

• Low installation height, free up space of other installations.

U.S.P

Premum & Premax


• Premum and Premax - High performing units with great flexibility– Reach unparalleled cooling capacities (Premax)– Adjust flow and pressure to fit any situation

• Angled Nozzles– Pre-set air pattern combined with JetCone system– Simple yet effective way of creating divergent air pattern without loss of capacity

• JetCone - Patent pending pressure and air flow regulation– Perfect balance between pressure and air flow

• AirGuide - Patent pending air pattern regulation– Ensure the optimal flow pattern, always

• Cooling, heating, ventilation and regulation– Get what you need from one unit with an outstanding result

Summary


• MagiCAD– Updated for all products including Premum and Premax– Air and water connections– 76 000 objects– LindQST plug-in

• LindQST– Easy calculation– Shows influence/difference between Angled Nozzles and AirGuide– Easy and fast access to always actual documents

Lindab’s full waterborne product range including Premum and Premax is available

IT solutions

With unique


solution


• All material will be available on the brand-site– Press release– Technical article– Technical material– Giveaways

A flexible message to the market…

Campaign description

brand.lindab.com

With unique


solution

http://brand.lindab.com/bav/campaign/premum-premax/default.aspx

we simplify construction

Documents

Lindab | we simplify construction - Flexibility when it is needed... Premum & Premax With unique JetCone and Angled Nozzles Patent pending solution