Embed Size (px)
Citation preview
Pro
duct Line Catalo
gue 2013
| Liner Casing Packers | Page XX
Liner Casing Packer
The Liner Casing Packer is a hydraulic set packer designed to hang the liner string in the casing, providing isolation from above and below. The Liner Casing Packer is designed for a wide casing range, allowing it to be deployed in diverse applications including heavier weight casing. A locking, bi-directional slip design eliminates any concerns of premature setting or breaking slips during running operations.
The latch unit and liner top have a built-in clutch feature which allows for liner rotation up to the maximum thread torque. This feature also incorporates a 38.1 mm (1.5 in) free point which provides simple rotation and removal of the drill / tie back string even in high deviation applications.
With the Suretech liner and latch assembly, the latch is the running tool making “one trip systems” another option for saving completion costs.
Features and Benefits
● Can be rotated when running● Adjustable setting pressures for different down hole applications● 69 MPa (10,000 psi) differentially rated● Ratchet maintains consistent pack off regardless of pressure differentials● 38.1 mm (1.5 in) free point assists latch removal● Centralized above and below● Rotationally friendly● Locking bi-directional slip design● Premium threads and elastomers available on request
Specifications GuideSize Casing
RangePacker
O.D.Packer
I.D.Packer
Seal BoreSeal Assy.
I.D.Pressure
Ratingmmin
kg/mlb/ft
mmin
mmin
mmin
mmin
kPapsi
177.8 x 88.97 x 3 1/2
34.23 - 47.6223.00 - 32.00
149.865.900
76.002.992 123.57
4.865
82.553.250 68,948
10,000177.8 x 114.37 x 4 1/2
34.23 - 43.1623.00 - 29.00
152.406.000
101.604.000
99.063.900
Pro
duct Line Catalo
gue 2013
| Liner Casing Packers | Page XX
Dual Set Open Hole Packer
The Dual Set Open Hole Packer is a hydraulic set packer designed to provide isolation in-between open hole frac stages. Full bore I.D. allows future milling / retrieving and service tools to pass through without issue. Both elements are protected by gauge rings and anti-extrusion rings to ensure proper function and pack-off at setting depth. The second element provides an extra back-up for high pressure fracturing or highly permeable formations.
Features and Benefits
● Dual element design● Adjustable setting pressures for different down hole applications● 69 MPa (10,000 psi) differentially rated● Ratchet maintains consistent pack off regardless of pressure
differentials● Available in 88.9 and 114.3 mm (3 ½ and 4 ½ in) sizes● Available for 152.4 - 158.8 mm (6.00 to 6.25 in) open hole● Rotating centralizers run below● Rotationally friendly● Premium threads and elastomers available on request
Specifications GuideConnection
SizeOpen Hole
SizePacker
O.D.Packer
I.D.Pressure
Ratingmmin
mmin
mmin
mmin
kPapsi
88.903 1/2
152.46.00
144.155.675 76.00
2.992
68,94810,000
155.7 - 158.86.13 - 6.25
149.865.900
114.304 1/2
152.46.00
146.055.750 101.60
4.000155.7 - 158.86.13 - 6.25
149.865.900
Pro
duct Line Catalo
gue 2013
| Liner Casing Packers | Page XX
Short Open Hole Packer
The Short Open Hole Packer is a hydraulic set packer designed to provide isolation in-between open hole frac stages. The large bore I.D. allows future milling / retrieving and service tools to pass through without issue. The short design facilitates reliable deployment through aggressive build sections in the wellbore and eliminates the need for handling pup joints, reducing completion costs. The Short Open Hole Packer comes standard with an integrated rotating, hardened, low friction centralizer to help ensure smooth installation of liner systems. Because of its close proximity to the element, the centralizer provides improved element stand-off in the open hole section providing a more reliable seal. An anti-extrusion back-up ring system provides improved element pack off, allowing for reliable sealing in open hole sections.
Features and Benefits
● Adjustable setting pressures for different down hole applications● 69 MPa (10,000 psi) differentially rated● Element anti-extrusion back-up system, with o-ring back-ups for improved
pressure integrity● Ratchet maintains consistent pack off regardless of pressure differentials● Rotating centralizer integrated into packer design● Centralizer placement allows even pack off of element, with other systems
the setting of the tools forces the packer elements to lift and centralize the entire liner string while setting
● Centralizer rotation designed to ensure residual torque is used to tighten connections
● Centralizer is hardened and coated to help ensure smooth packer installation● Premium threads and elastomers available on request
Specifications GuideConnection
SizeOpen Hole
SizeCentralizer
O.D.Packer
O.D.Packer
I.D.Pressure
Ratingmmin
mmin
mmin
mmin
mmin
kPapsi
88.903 1/2
120.74.75
114.304.500
111.134.375
74.602.937
66,1909,600
114.304 1/2
149.25.88
144.485.688
143.005.630 100.03
3.93868,94810,000
152.46.00
147.655.813
155.66.13
150.835.938
158.86.25
154.006.063
147.625.812
Pro
duct Line Catalo
gue 2013
| Liner Casing Packers | Page XX
Open Hole Anchor Packer
The Open Hole Anchor Packer is a hydraulic set packer primarily designed to anchor the bottom of a liner assembly into the open hole to prevent any unwanted and potentially damaging movement in the liner string during fracturing operations. The anchor packer comes complete with a single element, protected by gauge rings and anti-extrusion rings to ensure that proper pack-off is achieved at setting depth. Bi-directional slips are locked in place during running, eliminating premature setting.
Features and Benefits
● Single element design● Adjustable setting pressures for different down hole applications● 69 MPa (10,000 psi) differentially rated● Ratchet maintains consistent pack off regardless of pressure
differentials● Rotating centralizer run on bottom● Locking slip design provides reliable deployment● Premium threads and elastomers available on request
Specifications Guide
Size Open HoleSize
PackerO.D.
PackerI.D.
PressureRating
mmin
mmin
mmin
mmin
kPapsi
88.903 1/2
152.46.00
144.155.675 76.00
2.992
68,94810,000
155.7 - 158.86.13 - 6.25
149.865.900
114.304 1/2
152.46.00
146.055.750 101.60
4.000155.7 - 158.86.13 - 6.25
149.865.900
Pro
duct Line Catalo
gue 2013
| Liner Casing Packers | Page XX
Pressure Activated Valve
The Pressure Activated Valve is a hydraulically activated fracturing sleeve, designed to initiate fracturing operations. Internal tubing pressure is applied to a predetermined pressure, activating a piston until the shear screws shear to open the valve. After opening, a locking system ensures that the valve cannot re-close.
Features and Benefits
● Compact design for ease of handling (no pup joints required)● Simplicity of design enhances reliability● Ports have larger flow area than the liner to assist in preventing
screen outs● Adjustable activation pressures for different down hole applications● Spring assisted valve and locking system ensures valve always
opens and stays locked in the open position● Full bore I.D.● Premium threads and elastomers available on request
Specifications Guide
Size Weight Max. O.D. Min. I.D. PressureRating
mmin
kg/mlb/ft
mmin
mmin
kPapsi
114.304 1/2
17.2611.60
142.885.625
101.604.000 68,948
10,000139.705 1/2
29.7620.00
190.507.500
122.254.813
Pro
duct Line Catalo
gue 2013
| Liner Casing Packers | Page XX
Flow Lock Collar
The Flow Lock Collar is a ball activated tubing isolation valve, designed to allow the liner system to be set after the wellbore has been circulated with the desired fluid. A ball is circulated down the tubing until it lands on the flow lock seat. Pressure is applied from above until the predetermined activation pressure is achieved, shifting a piston which locks into the closed position and permanently shuts off the liner until the frac is initiated. Pressure can now be increased to set the remaining liner components.
Features and Benefits
● Once shifted, piston locks closed and cannot be re-opened● Available with a 19.05 or 28.58 mm (0.750 or 1.125 in) I.D. to allow for
higher density fluid type circulation.● Adjustable activation pressure for varied down hole applications● Compact design for ease of handling (no pup joints required)● O.D. designed to pipe diameter● Simplicity of design enhances reliability● 69 MPa (10,000 psi) rated● Premium threads and elastomers available on request
Specifications Guide
Size Max. O.D. Ball Size Flow Area PressureRating
mmin
mmin
mmin
cm2
in2kPapsi
114.304 1/2
114.304.500
20.320.800
2.840.44 68,948
10,00031.751.250
6.410.99
Pro
duct Line Catalo
gue 2013
| Liner Casing Packers | Page XX
Retrievable Ball Actuated ValveThe Retrievable Ball Actuated Valve is a ball-activated fracturing sleeve, designed to allow for multiple frac stages in a horizontal wellbore. Once the well has been fractured, it can either be shut in or flowed back depending on customer preference. Using a service rig or coiled tubing unit and a Suretech retrieving tool, the seats are retrieved with a simple tag and release method. With its patented design, up to 36 seats can be retrieved in a single trip. Utilizing a designated shifting tool, the sleeve(s) can then be closed to shut-off water producing intervals or for interval production evaluation. This system utilizes low specific gravity balls which encourage flow back when the well is put on production.
Features and Benefits
● No milling or drilling● Full drift inner diameter after seat retrieval● Decrease post frac / pre-production time by up to 40%● Flow port area designed to prevent screen out and reduce solids inflow● Compact design for ease of handling (no pup joints required)● Available in 88.9 and 114.3 mm (3 ½ and 4 ½ in) sizes● Available in 1.27 and 2.54 mm (0.050 and 0.100 in) ball seat increments
allowing for increased interval density to optimize production and to permit greater achievable fracturing pump rates
● Locking design ensures sleeve cannot prematurely shift closed● Up to 37 stages in 114.3 mm (4 ½ in) size● Closable sleeve feature for production optimization● Adjustable activation pressure● Circulation capability during retrieval improves wellbore clean-out● 69 MPa (10,000 psi) rated● Premium threads and elastomers available on request
Specifications Guide
Size Weight Max.O.D.
Min. I.D.Post
Retrieval
SeatIncrement
Max.Ball Size
Max.Seat I.D.
Min.Ball Size
Min.Seat I.D. Max.
Stagesmmin
kg/mlb/ft
mmin
mmin
mmin
mmin
mmin
mmin
mmin
88.903 1/2
13.849.30
117.484.625
72.822.867
1.270.050
or2.540.100
44.451.750
43.561.715
21.590.850
20.700.815
20
19.2712.95
114.304.500
66.682.625
35.561.400
34.671.365 13
114.304 1/2
17.2611.60
146.055.750
98.433.875 66.04
2.60065.152.565 37
20.0913.50
96.393.795
22.4715.10
93.983.700
63.502.500
62.612.465 35
Pro
duct Line Catalo
gue 2013
| Liner Casing Packers | Page XX
Millable Ball ValveThe Millable Ball Valve is a ball activated fracturing sleeve designed for multiple frac stages in a wellbore. High flow circumferential ports located on the housing of the sleeve permits continuous communication to the reservoir for high pressure fracturing operations and production. This system uses low specific gravity balls, which encourages flow back when the well is put on production. Specially designed anti-rotational features are incorporated into the sleeve to ensure reliable seat mill-out performance. Utilizing a designated shifting tool, the valve sleeve can be closed to shut-off water producing intervals or for interval production evaluation. The Millable Ball Valve is available in 1.60, 2.39 and 3.18 mm (0.063, 0.094 and 0.125 in) ball increments, allowing for increased interval density to optimize production and to permit higher achievable fracturing pump rates.
Features and Benefits
● Compact design for ease of handling (no pup joints required)● Improved ball seat geometric features to enhance production capability,
ball on seat pressure rating, and ball off seat performance● Locking design ensures sleeve cannot prematurely shift closed● Flow port area designed to assist in preventing screenouts● Anti-rotational feature ensures reliable milling performance● Closable sleeve feature for production optimization● Adjustable activation pressures for different down hole applications● Ability to mill out ball seat with valve in closed position● 69 MPa (10,000 psi) rated● Premium threads and elastomers available on request
Specifications Guide
Size Weight MaxO.D.
Seat Increment
PostMillout I.D.
Max.Ball Size
Max.Seat I.D.
Min.Ball Size
Min.Seat I.D.
Stagesmmin
kg/mlb/ft
mmin
mmin
mmin
mmin
mmin
mmin
mmin
114.304 1/2
20.0913.50
147.575.810
3.180.125
95.253.750
92.083.625
89.283.515 25.40
1.000
22.610.890
23
17.2611.60
98.433.875
95.253.750
92.463.640 24
20.0913.50 2.39
0.094
95.253.750
92.863.656
90.883.578 88.11
3.46986.113.390
*44
17.2611.60
98.433.875
95.253.750
93.243.671 *46
20.0913.50 1.59
0.063
95.253.750
85.733.375
84.533.328 22.23
0.87520.650.813
*44
17.2611.60
98.433.875
85.733.375
84.533.328 *46
* Maximum numbers of stages achievable by combining 1.59 and 2.39 mm (0.063 and 0.094 in) increment seats
Pro
duct Line Catalo
gue 2013
| Liner Casing Packers | Page XX
Selective Stimulation Packer
The Selective Stimulation Packer (SSP) is a straddle assembly designed to isolate and selectively fracture, inject or test multiple intervals and perforations in a single run utilizing coiled tubing or jointed pipe for deployment.
The SSP assembly consists of packer cups facing a packer element, with a number of ports for injection in-between. The SSP assembly is functioned by the movement of the pipe up and down without rotation and controlled by a drag block / collar locator system.
A specially designed equalizing system allows for ease of movement to desired intervals by equalizing hydrostatic pressure which may be trapped between the cups and packing element.
Features and Benefits
● No rotational manipulation required to operate● Ability to set / unset allows for multiple zone treatments in single trip● Modular construction permits straddle length adjustability to suit
operational requirements● Integral diverter control valve functioned by increasing circulation rate● Unloader valve permits ease of screen-out clean-up● System is adaptable for various pressure integrity operations● High pressure cup and pack-off element allows for extreme
fracturing / injection operations
Specifications Guide
Size CasingRange
CasingI.D.
GaugeO.D.
ToolI.D.
mmin
kg/mlb/ft
mmin
mmin
mmin
114.304 1/2
14.14 - 17.269.50 - 11.60
101.60 - 103.894.000 - 4.090
97.543.840
44.451.750
Pro
duct Line Catalo
gue 2013
| Liner Casing Packers | Page XX
SUREselect Multistage Fracturing System
The SUREselect multistage fracturing system is a hydraulic fracturing dart and sleeve system designed for open hole or cemented mono-bore completions. Each sleeve is opened by pumping a selective dart down to the matching key profiles in the sleeves. The darts can be retrieved in a single trip post fracturing using coiled tubing or jointed pipe. This patent-pending system provides full bore access before and after fracturing operations, allowing higher pump rates and well flow at full potential, without ball seat restriction or milling operations.
Stage selectivity for fracturing is the key feature of the SUREselect multistage fracturing system which allows the specific zone or multiple zones to be fractured with a single dart.
Features and Benefits
● Pump down dart / sleeve multistage fracturing system● Keys on dart engage matching profile in sleeves● Individual sleeves opened or multiple sleeves opened with a
single dart pumped down● Full bore liner for high rate fracturing operations● Multiple darts retrieved or dropped off in sump in one trip● No milling required● Future sleeve shift closed or open capability● Increased stage density● Optional centralizer available for varied open hole diameters
Specifications GuideCasing
SizeWeightRange
Body O.D.
BodyI.D.
PressureRating
mmin
kg/mlb/ft
mmin
mmin
kPapsi
114.304 1/2
14.14 - 20.099.50 - 13.50
146.055.750
101.604.000
68,94810,000139.70
5 1/2
29.76 - 34.2320.00 - 23.00
174.756.880
118.624.670
23.07 - 25.3015.50 - 17.00
174.756.880
124.214.890
Pro
duct Line Catalo
gue 2013
| Liner Casing Packers | Page XX
SUREplug
The SUREplug is a custom designed multistage fracturing plug requiring no milling or drilling. This multistage fracturing system reduces cost by eliminating post fracturing seat or bridge plug drill out and by enabling retrieval of multiple SUREplugs in a single trip.
This innovative plug design allows pressure equalization and circulation during the retrieval process.
Features and Benefits
● Retrieve multiple plugs in a single trip● Plug maintains pressure from above while allowing flow back from below● Pump down design● Applicable to all deviated and vertical wells● Post treatment flow through capacity● Saves total rig time by eliminating post fracturing drill out● Reduces formation damage resulting from ball seat or bridge plug drill out● Design allows full circulation during retrieval process● No milling or drilling required● No mill out debris● Co-mingle flow back from all zones● Retrieval utilizing coil tubing, jointed pipe, or wireline
Specifications Guide
Size CasingRange
Packer O.D.
PackerI.D.
PressureRating
mmin
kg/mlb/ft
mmin
mmin
kPapsi
114.304 1/2
14.14 - 17.269.50 - 11.60
95.253.750
31.751.250 68,948
10,000139.705 1/2
29.76 - 34.2320.00 - 23.00
114.304.500
44.451.750
Pro
duct Line Catalo
gue 2013
| Liner Casing Packers | Page XX
SUREjet
The Annular Frac Packer is a multi-set, single grip, compression set packer designed to provide isolation in cased hole fracturing operations. Although this packer is designed to be deployed on coil tubing, it can also be run on jointed pipe in either vertical or horizontal applications. A specially developed sand friendly continuous jay system allows reliable run, set and retrieving during fracturing operations. This packer can also be utilized for pressure testing operations in liner applications. The modular design allows this packer to be easily converted to a straddle packer assembly.
Features and Benefits
● No rotation required for setting● Continuous jay system designed for reliable functioning in sand-laden conditions● Integral bypass allows equalization at the packer● Low pack-off force required to fully set element● Available for 41 or 69 MPa (6,000 or 10,000 psi) differential rating● Carbide slips ensure a reliable non-slip set in sand-laden conditions● Premium threads and elastomers available or request
Specifications GuideCasing
SizeCasingRange
Casing I.D.
GaugeO.D.
ConnectionSize
mmin
kg/mlb/ft
mmin
mmin
mmin
114.304 1/2
22.4715.10
97.183.823
92.713.650
60.332 3/8
14.14 - 20.099.50 - 13.50
99.57 - 103.893.920 - 4.090
95.783.771
139.705 1/2
29.76 - 34.2320.00 - 23.00
118.62 - 121.364.670 - 4.778
114.304.500
23.07 - 25.3015.50 - 17.00
124.26 - 125.734.892 - 4.950
119.844.718
