14
LIQUID TIGHT CONNECTORS, CONDUIT AND FITTINGS

LIQUID TIGHT CONNECTORS CONDUIT AND FITTINGS...Clearance Hole B Overall Height C Overall Length D Thread Length E Flange Diameter 3/8 1/2 3/4.875.875 1.109 1.754 1.754 2.105 2.749

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

  • LIQUID TIGHTCONNECTORS, CONDUIT AND

    FITTINGS

  • Liquid Tight Conduit

    Liquid Tight Tubing

    This UL Type B flexible, non-metallic tubing resists

    corrosion, abrasion, oil, water, acid, metal shavings

    and rough environments. It is for use with nylon

    straight, snap-in or sweep connectors as well as steel

    and die cast connectors. Mounting brackets are also

    available. Resists abuse, pull and crushing.

    Smooth inside for easier wire pulling; will not harm

    conductors. No hazardous sharp edges or burrs.

    Quick installation. Suitable for indoor/outdoor use.

    Manufactured of flexible PVC.

    Part No. Trade Size

    A

    Outside Diameter

    B

    Inside Diameter

    Part No. Trade Size

    A

    Outside Diameter

    B

    Inside Diameter

    HF1-3/8

    HF1-1/2

    HF1-3/4

    HF1-1

    HF1-1 1/4

    HF1-1 1/2

    HF1-2

    3/8

    1/2

    3/4

    1

    1-1/4

    1-1/2

    2

    .700

    .830

    1.040

    1.303

    1.645

    1.883

    2.358

    .494

    .632

    .830

    1.054

    1.395

    1.588

    2.033

    HF2-1/4

    HF2-3/8

    HF2-1/2

    HF2-3/4

    HF2-1

    HF2-1 1/4

    HF2-1 1/2

    HF2-2

    1/4

    3/8

    1/2

    3/4

    1

    1-1/4

    1-1/2

    2

    .568

    .700

    .830

    1.040

    1.303

    1.645

    1.883

    2.358

    .395

    .494

    .632

    .830

    1.054

    1.395

    1.588

    2.033

    Standard colour: Gray.

    Standard colour: Black.

    Same advantages as the liquid tight conduit but

    has more flexibility and can be used in extremely tight

    quarters. Manufactured of flexible PVC, it is ideal for

    fibre optic cable protection and is also suitable for

    use in high vibration or flexing applications.

    80 Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1Toronto/GTA: 416-242-6811  North America toll free: 1-800-363-5080  Fax: 416-242-6819  Email: [email protected]

  • Slit TubingSlit design allows side entry and encirclement of

    pre-assembled harnesses and capillary tubes. Unique

    design allows for wire breakouts.

    All nylon construction resists salt water, gasoline,

    oil, weak acids, alcohol, grease and common solvents.

    Lightweight and flexible yet highly durable. Quick

    installation, cuts with utility knife, PVC cutter or Heyco

    cutting tool VF28. Mounting brackets also available.

    Part No. Nominal Diameter

    A

    Outside Diameter

    B

    Inside Diameter

    Wall

    Thickness Range

    HF5-1/8

    HF5-1/4

    HF5-5/16

    HF5-3/8

    HF5-7/16

    HF5-1/2

    HF5-5/8

    HF5-3/4

    HF5-1

    HF5-1 1/16

    HF5-1 1/4

    HF5-1 3/8

    HF5-1 1/2

    1/8

    1/4

    5/16

    3/8

    7/16

    1/2

    5/8

    3/4

    1

    1-1/16

    1-1/4

    1-3/8

    1-1/2

    .270

    .387

    .496

    .540

    .609

    .675

    .816

    .932

    1.106

    1.335

    1.460

    1.610

    1.851

    .174

    .278

    .357

    .420

    .447

    .505

    .650

    .772

    .917

    1.065

    1.281

    1.383

    1.531

    .012 -.017

    .013 -.018

    .015 -.025

    .015 -.025

    .015 -.025

    .015 -.025

    .015 -.025

    .015 -.025

    .015 -.025

    .017 -.030

    .017 -.030

    .017 -.030

    .017 -.030

    Standard colour: Black.

    81Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1Toronto/GTA: 416-242-6811  North America toll free: 1-800-363-5080  Fax: 416-242-6819  Email: [email protected]

  • Liquid Tight Connectors

    82 Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1Toronto/GTA: 416-242-6811  North America toll free: 1-800-363-5080  Fax: 416-242-6819  Email: [email protected]

    All nylon construction resists salt water,

    weak acids, gasoline, alcohol, oil, grease

    and common solvents. No disassembly

    required. Just push the conduit/tubing onto

    the ferrule, then tighten the domed sealing

    nut. This completed assembly can then be

    secured in the chassis by the locknut (or first

    secure the connector into an NPT threaded

    hole). No threading of the conduit or tubing

    is required, eliminating the chance of cutting

    the conduit and creating leak paths.

    Complete connector is reusable.

    Use of a sealing washer may be needed

    for wet locations. See page 92.

    Suitable for indoor/outdoor use, for

    original equipment manufacturers or field

    installers.

    Black connectors provided with nylon

    locknut, packed separately. Gray connectors

    provided with assembled o-ring and metal

    locknuts.

    Part No.

    Fits Conduit

    Trade Size

    A

    Clearance

    Hole

    B

    Maximum

    OA Length

    C

    Thread

    Length

    D

    Wrenching

    Nut Thickness

    E

    Wrenching

    Flats

    Sealing

    Washer

    HFC3/8 BL

    HFC1/2 BL

    HFC3/4 BL

    HFC1 BL

    HFC1-1/4 BL*

    HFC1-1/2 BL*

    HFC2 BL*

    3/8

    1/2

    3/4

    1

    1-1/4

    1-1/2

    2

    .875

    .875

    1.109

    1.375

    1.688

    1.938

    2.375

    1.33

    1.33

    1.41

    1.47

    2.12

    2.42

    2.49

    .625

    .625

    .625

    .781

    .715

    .680

    .680

    .250

    .250

    .250

    .250

    .250

    .250

    .250

    1.30

    1.30

    1.52

    1.875

    --

    --

    --

    SW1/2

    SW1/2

    SW3/4

    SW1

    --

    --

    --

    PG THREADED HUB FOR 1/4" TUBING

    Standard colour: Black. Also available in Gray. Please substitute GRAY for BL when ordering.*Sizes larger than 1" are manufactured in PVC.

    Standard colour: Black.UR only. File #E121095.

    STRAIGHT

    HFC1/4 PG-7 1/4 .492 1.13 .445 .210 .88 SW1/4

    E

  • Liquid Tight Connectors CONTINUEDSWEEP

    SNAP-IN

    All the same functions as the straight connectors but

    offer more flexibility. Complete connector is reusable.

    Smooth internal surfaces for easier wire installation.

    Black connectors provided with nylon locknut, packed

    separately. Use of a sealing washer may be required for

    wet locations. See page 92. Gray connectors provided with

    assembled o-ring and metal locknut.

    Suitable for indoor/outdoor use, for original equipment

    manufacturers or field installers.

    Part No.

    Fits Conduit

    Trade Size Thread Size

    A

    Clearance

    Hole

    B

    Maximum OA

    Height

    C

    Maximum OA

    Length

    D

    Thread

    Length

    Sealing

    Washer

    HFC3/8-90R*

    HFC1/2-90R*

    HFC3/4-90R*

    HFC1-90R*

    HFC1-1/4-90R

    HFC1-1/2-90R

    HFC2-90R

    3/8

    1/2

    3/4

    1

    1-1/4

    1-1/2

    2

    1/2 NPT

    1/2 NPT

    3/4 NPT

    1 NPT

    1-1/4 NPT

    1-1/2 NPT

    2 NPT

    .875

    .875

    1.109

    1.375

    1.688

    1.938

    2.375

    1.98

    1.98

    2.29

    2.83

    4.35

    4.46

    4.87

    2.91

    2.91

    3.17

    3.96

    4.71

    4.69

    5.31

    .52

    .52

    .52

    .69

    .64

    .66

    .67

    SW1/2

    SW1/2

    SW3/4

    SW1

    --

    --

    --

    Standard colour: Black or Gray.

    Sizes larger than 1" are manufactured in PVC.*UL and CSA Approved.

    All nylon construction resists salt water, gasoline, oil, alcohol,

    weak acids, grease and common solvents.

    Assembly friendly! Just push the conduit or tubing onto the

    ferrule, then tighten the domed sealing nut. Completed assembly

    can then be snapped into the chassis with fingertip pressure.

    No threading of the conduit or tubing required, eliminating the

    possibility of cutting the conduit and creating leak paths.

    Suitable for indoor/outdoor use. Completely reusable.

    Part No.

    Fits Conduit

    Trade Size

    A

    Mounting Hole

    Diameter

    B

    Maximum OA

    Length

    C

    Body

    Length

    D

    Wrenching Nut

    Thickness

    E

    Wrenching

    Flats

    HFC1/4-S*

    HFC3/8-S

    HFC1/2-S

    HFC3/4-S

    HFC1-S

    1/4

    3/8

    1/2

    3/4

    1

    .500

    .875

    .875

    1.090

    1.375

    1.500

    2.000

    2.000

    2.031

    2.250

    .445

    .625

    .625

    .625

    .781

    .219

    .250

    .250

    .250

    .250

    .875

    1.328

    1.328

    1.562

    1.812

    Standard colour: Black.* recognized only, File #E121095. Consult customer service for chassis thickness range.

    83Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1Toronto/GTA: 416-242-6811  North America toll free: 1-800-363-5080  Fax: 416-242-6819  Email: [email protected]

    Domed sealing nut

    Optional sealingwasher

    Suggested clear-ance hole for non-threaded mounting

    .062 (1.6mm)

    .032 (0.6mm)

    .093 (2.4mm)

    .125 (3.2mm)

    Chassis thicknessrange

    Sealing washer(included)

    Mounting hole

    A

    B

    E

    C

    D

    Domed sealing nut

    B

    A

    C

    D

  • Liquid Tight Connectors CONTINUEDQUICK TWIST - STRAIGHT SNAP-IN

    Part No. Trade Size

    A

    Mounting Hole

    Diameter

    B

    Overall

    Length

    C

    Body

    Length

    D

    Wrenching

    Nuts

    E

    Wrenching

    Flats

    HFC1/4-S Twist

    HFC3/8-S Twist

    HFC1/2-S Twist

    HFC3/4-S Twist

    1/4

    3/8

    1/2

    3/4

    .540

    .875

    .875

    1.093

    1.330

    1.376

    1.376

    1.495

    .344

    .391

    .391

    .390

    .090

    .090

    .090

    .090

    .750

    1.000

    1.000

    1.250

    Standard Colours: Black or Gray.

    Recognized under the Component Program of Underwriters’ Laboratories File #E121095.

    Part No. Trade Size

    A

    Clearance

    Hole

    B

    Max. Overall

    Length

    C

    Thread

    Length

    D

    Wrenching

    Nuts

    E

    Wrenching

    Flats

    HFC1/4NPTTwist

    HFC3/8NPTTwist

    HFC1/2NPTTwist

    HFC3/4NPTTwist

    1/4

    3/8

    1/2

    3/4

    .540

    .875

    .875

    1.109

    1.560

    1.720

    1.720

    1.840

    .465

    .625

    .625

    .625

    .200

    .200

    .200

    .200

    .750

    1.180

    1.180

    1.370

    QUICK TWIST - STRAIGHT NPT THREAD

    Standard Colours: Black or Gray.

    Locknuts not included.

    Listed under Underwriters’ Laboratories File #E28430. UL approval pending for 1/4 NPT size.

    For use with Heyco Flex conduit and tubing. One-piece solution with smooth internal surfaces for easier wire routing,

    protection and installation.

    All nylon construction resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.

    Easy permanent assembly. Just twist the tubing over the connector ferrule until the tubing clicks into place. No tools

    required. Unique locking fingers will accommodate various chassis thicknesses.

    Low cost electrical connector.

    84 Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1Toronto/GTA: 416-242-6811  North America toll free: 1-800-363-5080  Fax: 416-242-6819  Email: [email protected]

    .045 (1.1mm)

    .075 (1.9mm)

    .140 (3.6mm)

    .105 (2.7mm)

    Chassis thickness range

    Mounting hole

    B

    E

    AC

    D

    Suggetsed clearance hole for nonthreaded mounting

    B

    E

    C

    AD

  • Liquid Tight Connectors CONTINUEDQUICK TWIST - SWEEP SNAP-IN

    QUICK TWIST - SWEEP NPT THREAD

    For use with Heyco Flex conduit and tubing. One-piece

    solution with smooth internal surfaces for easier wire

    routing, protection and installation around corner angles.

    All nylon construction resistant to salt water, weak acids,

    gasoline, alcohol, oil, grease and common solvents.

    No tools needed. Twist the tubing over connector ferrule

    until the tubing ‘clicks’ into place. Unique locking fingers

    accommodate various chassis thicknesses.

    Low cost electrical connector.

    Trade Size

    A

    Mounting Hole

    Diameter

    B

    Overall

    Height

    C

    Overall

    Length

    D

    Body

    Length

    E

    Flange

    Diameter

    3/8

    1/2

    3/4

    .875

    .875

    1.093

    1.754

    1.754

    1.965

    2.749

    2.749

    3.081

    .390

    .390

    .390

    1.230

    1.230

    1.500

    Part No.

    HFC3/8-S-90 Twist

    HFC1/2-S-90 Twist

    HFC3/4-S-90 Twist

    Trade Size

    A

    Clearance

    Hole

    B

    Overall

    Height

    C

    Overall

    Length

    D

    Thread

    Length

    E

    Flange

    Diameter

    3/8

    1/2

    3/4

    .875

    .875

    1.109

    1.754

    1.754

    2.105

    2.749

    2.749

    3.081

    .521

    .521

    .530

    1.230

    1.230

    1.500

    Part No.

    HFC3/8NPT-90 Twist

    HFC1/2NPT-90 Twist

    HFC3/4NPT-90 Twist

    Standard Colours: Black or Gray.

    Locknuts not included.

    Listed under Underwriters’ Laboratories File #E28430.

    Standard Colours: Black or Gray.

    Recognized under the Component Program of Underwiters’ Laboratories File #E121095.

    85Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1Toronto/GTA: 416-242-6811  North America toll free: 1-800-363-5080  Fax: 416-242-6819  Email: [email protected]

    .075

    (1.9mm)

    .140

    (3.6mm)

    .045

    (1.1mm)

    .105

    (2.7mm)

    Chassisthickness

    range

    Suggested clearance hole for non-threaded mounting

    B

    E

    C

    Mounting Hole

    A

    B

    C

    D

    E

    C

    A

    D

  • All nylon construction with BUNA-N compression gland

    resists salt water, weak acids, gasoline, alcohol, oil, grease and

    common solvents. Fittings install in either clearance or threaded

    holes. Acme threads prevent skipping and speed installation.

    The domed sealing nut resists snags and sheds contaminants.

    An internal ratchet provides self-locking against vibration.

    Working temperatures: -22°F (-30°C) to 212°F (100°C). For

    short periods to 302°F (150°C). Protection class IP 68 per DIN

    40050 up to 70 psi (5 bar) water pressure.

    Available in metric.

    PG HUBS FOR FLEXIBLE CORDS (LOCKNUTS INCLUDED)

    .114 -.250

    .064 -.210

    .181 -.312

    .069 -.187

    .230 -.395

    .069 -.250

    .170 -.450

    .230 -.530

    .450 -.705

    .250 -.490

    .590 -.990

    .875 -1.260

    .787 -1.020

    1.260 -1.496

    .984 -1.220

    1.457 -1.732

    1.142 -1.378

    Pg 7

    Pg 9

    Pg 11

    Pg 13.5

    Pg 16

    Pg 21

    Pg 29

    Pg 36

    Pg 42

    Pg 48

    .492

    .599

    .733

    .804

    .886

    1.115

    1.470

    1.850

    2.125

    2.335

    1.17

    1.30

    1.46

    1.53

    1.66

    1.87

    2.23

    2.52

    2.64

    2.72

    .33

    .34

    .39

    .41

    .45

    .52

    .59

    .51

    .51

    .55

    .20

    .20

    .20

    .20

    .23

    .23

    .28

    .32

    .36

    .36

    .59

    .75

    .86

    .95

    1.05

    1.30

    1.66

    2.09

    2.36

    2.56

    Cable Dia.

    Range

    Min.– Max.

    Thread

    Type

    & Size

    A

    Clearance

    Hole

    B

    Max. O.A.

    Length

    C

    Thread

    Length

    D

    Wrenching

    Nut Thick.

    E

    Wrenching

    Flats

    Part No.

    3207

    3444

    3210

    3446

    3213

    3448

    3216

    3219

    3222

    3454

    3225

    M3204

    M3206

    3212

    3218

    3281

    3283

    3208

    3445

    3211

    3447

    3214

    3449

    3217

    3220

    3223

    3455

    3226

    M3205

    M3203

    --

    --

    --

    --

    Black Gray

    INSTALLATION NOTE:

    For optimum liquid tightness,

    use fitting with the smallest

    maximum dia meter that will

    still fit your application.

    To order locknuts separately, see page 92.

    Straight-Thru Liquid Tight Fittings

    86 Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1Toronto/GTA: 416-242-6811  North America toll free: 1-800-363-5080  Fax: 416-242-6819  Email: [email protected]

  • Straight-Thru Liquid Tight Fittings CONTINUED

    87Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1Toronto/GTA: 416-242-6811  North America toll free: 1-800-363-5080  Fax: 416-242-6819  Email: [email protected]

    .115 -.250

    .065 -.210

    .181 -.312

    .069 -.187

    .230 -.546

    .170 -.470

    .450 -.709

    .250 -.485

    .590 -1.00

    .472 -.787

    .875 -1.260

    .787 -1.020

    1/4 NPT

    3/8 NPT

    1/2 NPT

    3/4 NPT

    1 NPT

    1 1/4 NPT

    .540

    .670

    .875

    1.068

    1.350

    1.326

    1.680

    1.28

    1.49

    1.83

    1.72

    1.97

    2.41

    2.42

    2.69

    .45

    .53

    .62

    .63

    .75

    .76

    .78

    .21

    .20

    .20

    .23

    .28

    .30

    .30

    .63

    .75

    .95

    1.30

    1.65

    1.73

    2.05

    Cable Dia.

    Range

    Min.-Max.

    Thread

    Type

    & Size

    A

    Clearance

    Hole

    B

    Max. O.A.

    Length

    C

    Thread

    Length

    D

    Wrenching

    Nut Thick.

    E

    Wrenching

    Flats

    Part No.

    To order locknuts separately, see page 92.

    †US and Foreign Patents Pendings.

    †M4516

    †M4514

    3228

    3458

    3200

    3231

    3234

    3460

    †8437

    †M8439

    †M4524

    †M4522

    †M4517

    †M4515

    3229

    3459

    3201

    3232

    3235

    3461

    †8438

    †M8440

    †M4525

    †M4523

    Black Gray

    NPT HUBS FOR FLEXIBLE CORDS (LOCKNUTS NOT INCLUDED)

    All straight-thru fittings are also available in metric hubs.

    Tell us what you need.

  • Cable Dia.

    Range

    Min.- Max.

    Thread

    Type

    & Size

    A

    Clearance

    Hole

    B

    Max. O.A.

    Length

    C

    Thread

    Length

    D

    Wrenching

    Nut Thick.

    E

    Wrenching

    Flats

    Part No.

    Black Gray

    3254

    3474

    3251

    3266

    3239

    3462

    3255

    3475

    3252

    3267

    3242

    3463

    .181 -.312

    .069 -.187

    .170 -.470

    .230 -.546

    .450 -.709

    .250 -.485

    3/8 NPT

    1/2 NPT

    3/4 NPT

    .670

    .875

    1.068

    2.97

    4.09

    4.54

    5.14

    .53

    .62

    .63

    .20

    .20

    .23

    .23

    .75

    .95

    1.05

    1.30

    To order locknuts separately, see page 92.

    Pigtail™ Liquid Tight Fittings

    88 Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1Toronto/GTA: 416-242-6811  North America toll free: 1-800-363-5080  Fax: 416-242-6819  Email: [email protected]

    PG HUBS FOR FLEXIBLE CORDS (LOCKNUTS INCLUDED)

    NPT HUBS FOR FLEXIBLE CORDS (LOCKNUTS NOT INCLUDED)

    .114 -.250

    .064 -.210

    .181 -.312

    .069 -.187

    .230 -.395

    .069 -.260

    .170 -.450

    .230 -.546

    .450 -.709

    .250 -.485

    Pg 7

    Pg 9

    Pg 11

    Pg 13.5

    Pg 16

    Pg 21

    .492

    .599

    .733

    .804

    .886

    1.115

    2.44

    2.77

    3.44

    3.88

    4.36

    5.03

    .33

    .34

    .39

    .41

    .45

    .52

    .22

    .20

    .20

    .20

    .23

    .23

    .59

    .75

    .86

    .95

    1.05

    1.30

    Cable Dia.

    Range

    Min.- Max.

    Thread

    Type &

    Size

    A

    Clearance

    Hole

    B

    Max. O.A.

    Length

    C

    Thread

    Length

    D

    Wrenching

    Nut Thick.

    E

    Wrenching

    Flats

    Part No.

    To order locknuts separately, see page 92.

    3237

    3464

    3240

    3466

    3243

    3468

    3246

    3249

    3245

    3478

    3238

    3465

    3241

    3467

    3244

    3469

    3247

    3250

    3248

    3479

    Black Gray

    The PigtailTM fitting has a flexible

    extender to prevent sharp bends

    and extend cable life.

    Acme threads on body prevent

    skipping and speed installation.

    Also available in metric.

  • Right-Angle Liquid Tight FittingsPG HUBS FOR FLEXIBLE CORDS (LOCKNUTS INCLUDED)

    .062 -.210

    .114 -.250

    .069 -.187

    .181 -.305

    .078 -.260

    .230 -.375

    .095 -.260

    .170 -.470

    PG7-90

    PG 9-90

    PG11-90

    PG13.5-90

    .492

    .599

    .733

    .804

    .69

    .88

    .99

    1.06

    1.53

    1.77

    1.99

    2.20

    .33

    .34

    .39

    .41

    .86

    1.07

    1.23

    1.38

    .59

    .75

    .86

    .95

    Cable Dia.

    Range

    Min.-Max.

    Thread

    Type

    & Size

    A

    Clearance

    Hole

    B

    Right

    Angle Ht.

    C (Closed)

    Max. O.A

    Length

    D

    Thread

    Length

    E

    Sealing Nut

    Length

    F

    Wrenching

    Flats

    Part No.

    To order locknuts separately, see page 92.

    †M8530

    †M8532

    †M8534

    †M8536

    †M8538

    †M8540

    †M4542

    **M8542

    †M8531

    †M8533

    †M8535

    †M8537

    †M8539

    †M8541

    †M4553

    **M8543

    Black Gray

    .065 -.220

    .115 -.250

    .069 -.187

    .181 -.305

    .095 -.260

    .170 -.450

    1/4-90 NPT

    3/8-90 NPT

    1/2-90 NPT

    .540

    .670

    .875

    .69

    .88

    1.06

    1.66

    1.96

    2.40

    .45

    .53

    .62

    .86

    1.07

    1.38

    .63

    .75

    .95

    Cable Dia.

    Range

    Min.-Max.

    Thread

    Type

    & Size

    A

    Clearance

    Hole

    B

    Right

    Angle Ht.

    C (Closed)

    Max. O.A

    Length

    D

    Thread

    Length

    E

    Sealing Nut

    Length

    F

    Wrenching

    Flats

    Part No.

    To order locknuts separately, see page 92.†US and foreign patents pending.

    **UL Listed Underwriters Laboratories.

    †M4560

    †M4562

    †M8560

    †M8562

    †M4564

    **M8564

    †M4561

    †M4563

    †M8561

    †M8563

    †M4565

    **M8565

    Black Gray

    Each cordgrip is moulded in the open positionfor ease of installation. After cable insertion, thefitting snaps closed, bending the cable withoutdamage, saving considerable time and money.

    Part design provides liquid tight integrityeven in the open position. Acme threads onbody prevent skipping and speed installation.All-nylon with TPE gland, resists salt water,weak acids, gasoline, oil, alcohol, grease andcommon solvents. This feature is not assessedby UL certification and testing.

    Available in metric.

    89Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1Toronto/GTA: 416-242-6811  North America toll free: 1-800-363-5080  Fax: 416-242-6819  Email: [email protected]

    NPT HUBS FOR FLEXIBLE CORDS (LOCKNUTS NOT INCLUDED)

    SUGGESTED CLEARANCE HOLE

    FOR NONTHREADED MOUNTING

    NPT HUB

    D

    F

    C

    B

    A

    E

    PART ACCOMMODATESCABLE DIAMETERSSHOWN IN CHART

  • Snap–In Liquid Tight Grommets

    Mounting Brackets

    Gray moulded EPDM grommet is fire tested to

    FMVSS 302, vehicle safety norm 302 (DIN 75200)

    to provide light strain relief to the cable. Material

    hardness 50 shore A.

    Just snap into place, pierce thin membrane,

    insert and pull back cable. Protection Class IP 67

    per EN60529.

    Part No.

    Cable

    Diameter

    Range

    Panel

    Hole

    Diameter

    Panel

    Thickness

    Range

    A

    Head

    Diameter

    B

    Head

    Thickness

    C

    Overall

    Length

    LTB30-50

    LTB50-70

    LTB70-100

    LTB100-140

    LTB140-200

    LTB200-260

    LTB260-350

    .12 -.20

    .20 -.28

    .28 -.39

    .39 -.55

    .55 -.79

    .79 -1.02

    1.02 -.1.38

    .52

    .63

    .75

    .91

    1.14

    1.50

    1.89

    .04 -.16

    .04 -.16

    .04 -.16

    .04 -.16

    .04 -.16

    .04 -.16

    .04 -.16

    .79

    .79

    .94

    1.10

    1.34

    1.81

    2.26

    .27

    .23

    .23

    .25

    .26

    .27

    .31

    .50

    .79

    .83

    .93

    1.02

    1.18

    1.42

    Standard Colour: Gray.

    Used to mount liquid tight conduit or tub-

    ing securely into place, vertically or

    horizontally.

    Only fingertip pressure is required. Low

    profile design for pleasing appearance and

    space saving.

    Recommended distance between brackets:

    intervals not greater than 3 ft.

    Use one standard #10 screw (not included)

    to attach bracket to panel or chassis.

    Part No. Trade Size

    A

    Inside

    Diameter

    B

    Length

    C

    Height

    D

    Outside

    Diameter

    E

    Width

    HFB3/8

    HFB1/2

    HFB3/4

    HFB1

    3/8

    1/2

    3/4

    1

    .71

    .84

    1.05

    1.32

    .91

    1.07

    1.26

    1.51

    .69

    .70

    .73

    .89

    .91

    1.05

    1.26

    1.52

    .75

    .75

    .75

    .75

    Standard Colour: Black. Gray also available.

    90 Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1Toronto/GTA: 416-242-6811  North America toll free: 1-800-363-5080  Fax: 416-242-6819  Email: [email protected]

  • Liquid Tight Knock-Out Seals

    Liquid Tight Cordgrip Labkits

    Part No. Trade Size

    Mounting Hole

    Diameter

    A

    Head Diameter

    B

    Overall Height

    Max. Chassis

    Thickness

    C

    Head Thickness

    KOS-LT1/2

    KOS-LT3/4

    KOS-LT1

    1/2

    3/4

    1

    .875

    1.093

    1.375

    1.281

    1.531

    1.796

    .500

    .546

    .562

    .125

    .125

    .125

    .359

    .390

    .421

    These liquid tight knock-out seals are made of

    Santoprene 251-80 and are oil and rain tight and

    fully submersible. They lock firmly into boxes up to

    .125" thick and install with fingertip pressure (no

    tools required).

    Standard colour: Black.

    91Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1Toronto/GTA: 416-242-6811  North America toll free: 1-800-363-5080  Fax: 416-242-6819  Email: [email protected]

    Our labkits are perfect for product design departments, experimental labs and for all

    prototype work.

    LABKIT 78 is an assortment of liquid tight cordgrips with approximately the following

    quantities and part numbers. (Content may vary.)

    6 each M3207

    4 each M3211, M3228, M4330, M4337, M8564

    M8537, M4450, M4354, M4399

    3 each M3244

    2 each M3232

  • Manufactured of Thermoplastic Elastomer, these

    washers have special double sealing ridges to com-

    pensate for minor unevenness at enclosure. Suitable

    for wet locations requiring a separate gasket between

    the box and fitting.

    Liquid tight, dust tight and oil tight at enclosure.

    Easy to install since washers seal off on the

    perimeter, not on the connector threads.

    Part No.

    Fits Electrical

    Fitting Trade Size NPT

    A

    Inside Diameter

    B

    Outside Diameter

    C

    Thickness

    SW1/4

    SW3/8

    SW1/2

    SW3/4

    SW1

    SW1-1/4

    1/4

    3/8

    1/2

    3/4

    1

    1-1/4

    .540

    .670

    .820

    1.030

    1.315

    1.680

    .796

    1.010

    1.240

    1.500

    1.770

    1.990

    .125

    .125

    .125

    .135

    .160

    .160

    92 Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1Toronto/GTA: 416-242-6811  North America toll free: 1-800-363-5080  Fax: 416-242-6819  Email: [email protected]

    Locknuts

    Sealing Washers

    NLN1/4NPT

    NLN3/8NPT

    NLN1/2NPT

    NLN3/4NPT

    NLN1NPT

    NLN1-1/4NPT

    1/4 NPT

    3/8 NPT

    1/2 NPT

    3/4 NPT

    1 NPT

    1-1/4 NPT

    .265

    .265

    .265

    .265

    .265

    .281

    .748

    1.058

    1.058

    1.312

    1.605

    1.968

    NLNPG7

    NLNPG9

    NLNPG11

    NLNPG13.5

    NLNPG16

    NLNPG21

    NLNPG29

    NLNPG36

    NLNPG42

    NLNPG48

    PG 7

    PG 9

    PG 11

    PG 13.5

    PG 16

    PG 21

    PG 29

    PG 36

    PG 42

    PG 48

    .218

    .218

    .218

    .250

    .250

    .281

    .281

    .281

    .328

    .328

    .750

    .859

    .937

    1.062

    1.171

    1.406

    1.812

    2.244

    2.600

    3.060

    Part No.

    Thread Type

    & Size G H

    Minimum order 100.

    Standard colours: Black or Gray.

    Also available in metal and nickel-plated brass.

    National Pipe Threads

    PG Threads per DIN 40430

    A

    B

    C