Upload
duongngoc
View
226
Download
0
Embed Size (px)
Citation preview
Spare parts for:
Suitable for:
This catalogue is automatically generated. Therefore, the sequence of the items might not be always shown at best.Updates will be issued in case of additionsand/or amendments.Suitable universal spare parts may not be included
<T1
SEKOT1>
Spare parts for:
Suitable for:
This catalogue is automatically generated. Therefore, the sequence of the items might not be always shown at best.Updates will be issued in case of additionsand/or amendments.Suitable universal spare parts may not be included
Re
l. 2
01
3-0
91
31
227
Warewashing equipment
Suitable for: Suitable for:
<T2
Hose reelsT2>
<|3359801 |> KLIN W ASHING STATION 1 PR ODU C T <| |>
with washing pipe 15 m for washing
SEKO LB00297104
<|3359498 |> W ASH IN G AN D D ISIN FECTION CONTR OL BO X <|3359803 |> CRU SHPR OOF PISTOLfor 1 product with rapid coupling
with pipe 20 m and gun
SEKO CEP1200APA000000 SEKO LB00297031 SEKO LB970119E/C
<|3449271 |> HO SE <|3090209 |> HO SE END F IT TING W ITH N ON-R ETU R N VALVEstainless steel coated
length 20000 mm
SEKO 970117 SEKO LB00.0111
<|3025742 |> SET OF 1 PR OD UC T STATION TAP <|3391026 |> ST.STEEL SU PPOR T FOR 5 L CAN ISTER
SEKO LB00297001 SEKO LB970101 SEKO 970114
<|3025743 |> TAP 2 OU TLETS <| |>
SEKO LB00297002
<T1
SEKOT1>
Suitable for: Suitable for:<|3359516 |> W ASH IN G AN D D ISIN FECTION CONTR OL BO X <|3359803 |> CRU SHPR OOF PISTOL
for 2 products with rapid coupling with pipe 20 m and gun
SEKO CEP2200APA000000 SEKO LB00297031 SEKO LB970119E/C
<|3449271 |> HO SE <|3090209 |> HO SE END F IT TING W ITH N ON-R ETU R N VALVEstainless steel coated
length 20000 mm
SEKO 970117 SEKO LB00.0111
<|3025742 |> SET OF 1 PR OD UC T STATION TAP <|3025743 |> TAP 2 OU TLETS
SEKO LB00297001 SEKO LB970101 SEKO LB00297002
<T2
Inlet hosesT2>
<|3449301 |> POLYETH YLENE H OSE ø 2x4 m m <|3449299 |> POLYETH YLENE H OSE ø 4x6 m msold per meter sold per meter
SEKO 90068 SEKO 90089
<T2
Rinse aid pumps and accessoriesT2>
<|3090353 |> BU LKH EAD F ITTIN G (3 PIECES) <|3090355 |> BU LKH EAD F ITTIN G (5 PIECES)for tank inlet for tank flat inlet
for detergent injection
SEKO 9900107047 SEKO 9900107084
<T1
SEKOT1>
Suitable for: Suitable for:<|3090359 |> CON DU C TIVIT Y PR OBE <|3090149 |> DETER G EN T DISPEN SER BR 3 230V 50Hz
for PA, SDN-3 santoprene tube 3 L/h
SEKO 9900101009 SEKO 9900101060 SEKO 9900106816 SEKO NBR0003A1006 SEKO PBR0003A1006
<|3090138 |> DETER G EN T DISPEN SER PBR 3 230V <|3090351 |> SANTOP RENE D IAPHR AGM -TU BEflowrate 3 L/h 0.1 bar with connections
stand-by adjustment protection IP 56 santoprene tube feeder 1.5 m complete with with assembly kit
SEKO NBR0003A1000 SEKO NPBR0003A1000 SEKO 9900090057 SEKO 990009057
<|3090310 |> DETER G EN T DISPEN SER PBR 3 230V 50Hz <|3090351 |> SANTOP RENE D IAPHR AGM -TU BEsantoprene tube 3 L/h with connections
SEKO PBR0003A1017 SEKO 9900090057 SEKO 990009057
<|3090213 |> DETER G EN T DISPEN SER PU M P <|3090157 |> DETER G EN T DOSING PU M P PP 7 L/h 24V8W 220V 50/60Hz
SEKO NBR0003A1019 SEKO PPP0007D1001
<|3090105 |> DETER G EN T ELEC TR OM AG NETIC PU M P <|3090146 |> DETER G EN T KCL L EVEL PR OBEsantoprene tube non return valve EPDM
flowrate 5 L/h - pressure 2 bar size 450x22 mm 230V 50Hz - IP 65 protection flow rate adjustment 0-100% it can withstand backpressures over 3 bar up to 7 bar max with one inlet for level probe complete with with assembly kit
SEKO KCL631NPED00 SEKO 9900100080 SEKO 9900100081
<T1
SEKOT1>
Suitable for: Suitable for:<|3090300 |> DETER G EN T PERISTALTIC PU M P PG -3 <|3090351 |> SANTOP RENE D IAPHR AGM -TU BE
fixed flowrate: 3 L/h with connections santoprene tube 3W 230V 50Hz complete with assemply kit
SEKO NPG0003A1000 SEKO NPG0003A1027 SEKO PPG0003A1000 SEKO 9900090057 SEKO 990009057
<|3090112 |> DETER G EN T PERISTALTIC PU M P PR -7 <|3090125 |> M OU N TIN G KIT FOR PER ISTALTIC PU M Padjustable flow rate 1.5 - 7 L/h including:
santoprene tube 4-meter PVC tube ø 4x1 pressure 0.1 bar inlet connector for tank 230V 50Hz foot valve with filter with assembly kit
SEKO PPR0007A1000 SEKO PPR0007A1000_A SEKO 9900106539
<|3090201 |> DETER G EN T PERISTALTIC PU M P PR -7 <|3090202 |> SANTOP RENE PIPE 6x10 m madjustable flow rate 1.5 - 7 L/h connection coupling 8x12 mm
santoprene tube with clamp connections 8x12 mm smart for detergent pressure 0.1 bar 230V 50Hz with assembly kit
SEKO PPR0007A1042_A SEKO PPR0071A1013 SEKO PRR0007A1042 SEKO 9900090008
SEKO PR00071A1000
<|3090232 |> DO SING PUM P 24V 1.25 L/h 3.0 b ar <|3090354 |> ELBOW F ITTIN G FOR H OSE 4x6for tank inlet
in stainless steel for Dishwasher (HILTA) W13T
SEKO PPP0001D2000 SEKO PPP0001D2002 SEKO 9900060073
<T1
SEKOT1>
Suitable for: Suitable for:<|3090352 |> F OOT F ILTER OF PP <| |>
for PIPE 4x6 mm for DISPENSER SEKO
SEKO 9900069021 SEKO 9900106162
<|3090308 |> HYD RAU LIC DISPEN SER D IB -3 <|3090103 |> DIAP HR AG M FOR D OSERhydraulic system for rinse aid dosing
in DISHWASHERS, does not require power supply connections adjustable flow rate: 0÷3 cm3 solenoid valve - boiler connection (DIB-E) for Pan/utensilwashing machines (ELETTROBAR) U60 U61 - U70 for Pan/utensilwashing machines (LAMBER) P700
SEKO DIB0805E4000 SEKO 0000050032
<|3090101 |> HYD RAU LIC RIN SE AID INJECTO R <|3090103 |> DIAP HR AG M FOR D OSERthis version is suitable for connection with
SOLENOID VALVE TUBING adjustable flow rate from 0 to 5 cc polypropylene + FV body pressure min 0.3 bar - max 3 bar spring-loaded ram in stainless steel The system operates by water pressure differential. During each cycle, the positive pressure on the outside causes rinse aid detergent to be sucked. at the end of every washing or rinsing cycle, a spring injects the desired quantity of liquid in the rinsing tubing.
SEKO DIB0603E4000 SEKO 0000050032
<T1
SEKOT1>
Suitable for: Suitable for:<|3090102 |> HYD RAU LIC RIN SE AID INJECTO R <|3090103 |> DIAP HR AG M FOR D OSER
this version is suitable for WASH PUMP connection adjustable flow rate from 0 to 5 cc polypropylene + FV body pressure min 0.3 bar - max 3 bar spring-loaded ram in stainless steel The system operates by water pressure differential. During each cycle, the positive pressure on the outside causes rinse aid detergent to be sucked. at the end of every washing or rinsing cycle, a spring injects the desired quantity of liquid in the rinsing tubing.
SEKO DIB0603P4000 SEKO 0000050032
<|3090309 |> HYD RAU LIC RIN SE AID INJECTO R M ODEL D IB-P <|3090140 |> LEVEL ALAR M SYSTEMhydraulic system for rinse aid dosing inlet for two level probes
in DISHWASHING MACHINES, does not require light indication and alarm repetition outlet power supply connections suitable for all SEKO dispenser adjustable flow rate: 0÷3 cm3 connection to wash pump (DIB-P)
SEKO DIB0805P4000 SEKO PAL0000A0000 SEKO PAL0000A0000_A
<|3090166 |> M AN UA L R IN SE AID D ISPEN SER <|3090357 |> M OU N TIN G BRACKET
SEKO HP30E0000000 SEKO 0000120060 SEKO 000012013801
<|3090358 |> M OU N TIN G BRACKET <|3090126 |> M OU N TIN G KIT FOR PER ISTALTIC PU M Pfor two peristaltic pumps including:
in AISI 316 stainless steel 4-meter PVC tube ø 4x1 1 inlet connector for tank 1 foot valve with filter 1 conductivity probe
SEKO 0000120002 SEKO
<T1
SEKOT1>
Suitable for: Suitable for:<|3090356 |> NO N-R ETU R N VALVE AISI 316 STAINL.STEEL <|3090306 |> PERISTALTIC DETER GENT PU M P PA -6
stainless steel aisi 316 flow rate: 6 l per h for rinse aid injection 1/8" G.M. pressure: 0.1 bar (FPM valve) santoprene pipe 230V 50Hz complete with mounting kit and conductivity probe
SEKO 9900071033 SEKO 9900071054 SEKO PPA0006A1000 SEKO PPA0006A1000_A
<|3090301 |> PERISTALTIC DETER GENT PU M P PG -0.4 <|3090350 |> SEKOBR ILL PIPEfixed flow rate: 0.4 l per h
pressure: 3 bar sekobrill pipe 230V 50Hz complete with mounting kit
SEKO NPG030HA2000 SEKO PPG030HA2000 SEKO 9900090098
<|3090302 |> PERISTALTIC DETER GENT PU M P PG -1.5 <|3090304 |> PERISTALTIC DETER GENT PU M P PR -1fixed flow rate: 1.5 l per h fixed flow rate: 0.3÷1 l per h
pressure: 0.1 bar pressure: 3 bar santoprene pipe sekobrill pipe 230V 50Hz 230V 50Hz complete with mounting kit complete with mounting kit
SEKO NPG001HA1000 SEKO PPG001HA1000 SEKO PPR0301A2000 SEKO PPR0301A2000_A
<|3090303 |> PERISTALTIC DETER GENT PU M P PR -4 <|3090351 |> SANTOP RENE D IAPHR AGM -TU BEfixed flow rate: 0.6÷4 l per h with connections
pressure: 0.1 bar santoprene pipe 230V 50Hz complete with mounting kit
SEKO PPR0004A1000 SEKO PPR0004A1036 SEKO PPR0004A1036_A SEKO 9900090057 SEKO 990009057
<T1
SEKOT1>
Suitable for: Suitable for:<|3090305 |> PERISTALTIC DETER GENT PU M P PR T2 <|3090168 |> PERISTALTIC PU M P PE-1.5
flow rate: 6 L per h 230V 0.1 BAR - 1.5 L/h pressure: 0.1 bar santoprene pipe 230V 50Hz complete with mounting kit
SEKO PPS0003A1000 SEKO PRT0006A1100 SEKO PRT0006A1100_A SEKO PPE001HA1000 SEKO PPE001HA1000_A
<|3090215 |> R IN SE AID D ISPENSER BM 0.7 <|3090204 |> R IN SE AID D ISPENSER 230Vfor Dishwasher (ELFRAMO) D30 - D40 - D80
for Glasswasher/Cupwasher (ELFRAMO) BD14 - B11 B14 - B15
SEKO PBM030HA2006 SEKO NBM030HA2000 SEKO NPBM030HA2000
<|3090241 |> R IN SE AID D OSIN G PU M P PR -1 24V 3W <|3090240 |> R IN SE AID D OSIN G PU M P PR -4 24V 3W
SEKO PPR0301B2000 SEKO PPR0301B2000_A SEKO PPR0004B1000 SEKO PPR0004B1000_A
<|3090129 |> R IN SE AID ELECTR OM AG N ETIC PU M P <|3090147 |> R IN SE AID KCL LEVEL PR OBEsekobril tube non return valve FPM
flowrate 2 L/h - pressure 7 bar size 450x22 mm 230V 50Hz - IP 65 protection flow rate adjustment 0-100% it can withstand backpressures over 3 bar up to 7 bar max with one inlet for level probe complete with with assembly kit
SEKO KCL632NPFR00 SEKO 9900100098
<T1
SEKOT1>
Suitable for: Suitable for:<|3090049 |> R IN SE AID PU M P 230V 50Hz <|3090155 |> R IN SE-A ID D ISPENSER PG 0.4 230V
sekobrill pipe 0.4 L/h 230V 50/60Hz - 0.4 Lt/h time-break regulation This KIT for DISHWASHER includes: bracket, hose, connection cables, foot filter with stainless steel counterweight for Dishwasher (ELFRAMO) D30 - D40 - D80 for Glasswasher/Cupwasher (ELFRAMO) B11 - B14 B15
SEKO NBM030HA2003 SEKO NBM030HA2005 SEKO NMB030HA2003 SEKO PPG0H0HA2001
SEKO PBM030HA2000 SEKO PBM030HA2005
<|3090307 |> TW IN DOSE PU M P 10 <| |>
size 190x155 mm compact injection system. it allows pump speed regulation detergent flow rate max 7 L/h rinse aid flow rate max 1 L/h at 3 bar 230V 50Hz complete with mounting kit
SEKO GTR04R01A2000 SEKO GTR04R01Y2000
<T2
Wash jets and accessoriesT2>
<|3391027 |> JET - 14 PCS PACK <| |>
SEKO 970103N
<T1
SEKOT1>
The data herewith contained may change without notice and LF SpA cannot be
held responsible for possible errors stated or resulting by the use of this document.
All rights reserved. No part of this publication may be reproduced without written
permission by LF SpA.