Upload
fredericomangue
View
102
Download
13
Embed Size (px)
DESCRIPTION
Manutence
Citation preview
Ingenico190192avenueCharlesdeGaulle92200NeuillysurSeineTl.33(0)146258200Fax33(0)[email protected]
User
sG
uid
e
LocalLoadingTool(LLT)
ForTELIUMTerminals
Copyright2009IngenicoAllrightsreserved
900001549R1100001_2961074102/96 Copyright2009IngenicoAllrightsreserved
900001549R1100001_2961074103/96 Copyright2009IngenicoAllrightsreserved
900001549R1100001_2961074104/96 Copyright2009IngenicoAllrightsreserved
CONTENTS
1. INTRODUCTION _______________________________________________6
2. Environment__________________________________________________6
3. Softwareinstallation___________________________________________6
4. Softwareremoval _____________________________________________7
5. UseofLLTfunctions ___________________________________________7
5.1. Softwarecomponentdownloading ______________________________________ 7
5.2. Parameterfilesdownloading ___________________________________________ 7
5.3. Knowingthepresentcomponentlistintheterminal ________________________ 8
5.4. Uploadingdiagnosticfiles______________________________________________ 8
5.5. Connectingtotheterminal _____________________________________________ 8
5.6. Disconnectingtotheterminal __________________________________________ 9
5.7. Selectionandfiletransfer ______________________________________________ 9
5.8. Displayingandconsultation ____________________________________________ 11
5.9. Displayingandconsultation ____________________________________________14
6. FileLIFECOUNTER.DIA_________________________________________ 17
6.1. FileLIFECOUNTER.DIA_________________________________________________ 17
7. FileBOOSTERDIA ____________________________________________ 17
7.1. ConsultingofBoosterdiafiles: _________________________________________ 17
8. FileAPPDEFAULT.DIA _________________________________________ 18
8.1. ConsultationofAppDefault.dia.files:_____________________________________18
9. FileAPPCOUNTER.DIA_________________________________________ 18
9.1. ConsultationofAppCounter.dia.files: ____________________________________18
900001549R1100001_2961074105/96 Copyright2009IngenicoAllrightsreserved
10. LLTSetting __________________________________________________ 19
10.1. FileLLT.INT _________________________________________________________19
10.2. FileLLT.PRM ____________________________________________________ 20
10.3. FileLLT.LNG _____________________________________________________ 20
10.4. FileLLT.BMK ____________________________________________________ 20
10.5. ChangingLLTlanguage____________________________________________ 20
10.6. Defininganewtranslationlanguage _________________________________ 20
10.7. LLTuseincommandmode__________________________________________ 21
10.8. DisplayingtheUSBconnectionportnumber __________________________ 24
11. Appendices__________________________________________________ 25
11.1. Listofshortcutkeys __________________________________________________25
11.2. Listoficonsandtheirfunction _________________________________________ 26
11.3. ProblemsandSolutions_______________________________________________ 26
12. ConnectionConfigurationwithterminal__________________________ 27
12.1. WithWindows2000Professional________________________________________27
12.2. WithWindows2003Serveur___________________________________________ 40
12.3. WithWindowsXPProfessional______________________________________ 55
12.4. WithWindowsVistaProfessional____________________________________ 65
12.5. WithWindowsSevenProfessional___________________________________ 79
900001549R1100001_2961074106/96 Copyright2009IngenicoAllrightsreserved
1. INTRODUCTION
Thisdocumentdescribes themanner inwhich to installanduse theLocalLoadingTool (LLT).This toolallowstheusertodownloadapplicationsintheterminalswithTELIUMtechnology.Inthecontinuationofthisdocument,thefollowingdesignations:
terminalswithTELIUMtechnologywillbereplacedindifferentlyby:
thewordterminalortheabbreviationEFT.
ToinstallandusetheLLTsoftwarefollowthedifferentstepsdescribedbelow: Softwareinstallation ConnectionConfigurationwithterminalaccordingtotheusedWindowsplatform. UseofLLTfunctions
2. Environment
LLTsoftwarerunsunderMicrosoftWindowsplatform: Windows2000ProfessionalServicePack2Minimum. Windows2003Server WindowsXP WindowsVistaProfessional WindowsSevenProfessional
InorderforthesoftwaretorunthecomputerwherethesoftwareisinstalledmusthaveaCDROMdriveandaserialorUSBport.
3. Softwareinstallation
You must have administrative privileges to install and to uninstall this program. This includes havingadministrativeprivilegesthefirsttimeyoustartyourcomputerafterinstallingoruninstalling.LLTuseport IP6000 fordata exchange.Theuseof thisportmustnotbe forbiddenby thenetworkadministration(Firewall,VirtualPrivateNetwork(VPN))ormustnotbeusedbyanotherapplication.BeforeinstallingtheLLTapplication,makesurethatallapplicationsareclosed.Then,inserttheCDROMcontainingtheLLTsoftwareandfollowinstructionsoftheLLTsetup.IfyourPCdoesn't run thesetupautomatically,click"Start"button from the taskbar,choose"Run ...",then "Browse ..."CDdriveand select "LLT_setup.exe".Launch setupafter clickingon the "Open"and"OK"Button.Onceyouhavecompletedthesetupprocedure,youcanlaunchthetoolbydoubleclickingontheLLTiconorfromStartbutton,choosePrograms>TELIUMTools>LLT>LLT.
4. Softwareremoval
FromtaskbarclickStartandchoosePrograms>TELIUMTools>LLT>UninstallLLT.
5. UseofLLTfunctions
LLTallowsdownloading software componentsorparameter files in the terminalduringadownloadingactivity.Italsomayallowuploadingdiagnosticfileduringadiagnosticormaintenanceactivity.
5.1. Softwarecomponentdownloading
SelectthedownloadingactivityintheLLTmenu.ActivityDownloading Connecttotheterminal(seeConnectingtotheterminal) MoveintheLLTexplorerinordertoselectthecatalogfilescorrespondingtothecomponentsto
bedownloaded(seeFileselection).
Downloadthecomponent(s)intheSWAPdirectoryoftheterminal(seeFiletransfer). Disconnect(seeDisconnectingtotheterminal).Thevalidcomponentsaretransferredinthe
SYSTEMdirectoryinordertobeused
5.2. Parameterfilesdownloading
YoucandownloadaparameterfileusablebyanapplicationintheHOSTdirectoryoftheterminal.Note:theapplicationusingthisparameterfilewillhavetodeleteitafterusing.
SelectthedownloadingactivityintheLLTmenu.ActivityDownloading Connecttotheterminal(seeConnectingtotheterminal) GotoHOSTdirectorybyclicking iconorwithCTRL+Bkeys. MoveintheLLTexplorerinordertoselectthefilestobedownloaded(seeFileselection). Downloadthecomponent(s)intheHOSTdirectoryoftheterminal(seeFiletransfer). Disconnect(seeConnectingtotheterminal).
900001549R1100001_2961074107/96 Copyright2009IngenicoAllrightsreserved
5.3. Knowingthepresentcomponentlistintheterminal
SelectthedownloadingactivityintheLLTmenu.ActivityDownloading Connecttotheterminal(seeDisconnectingtotheterminal) DoubleclickonRUNNING.LSTorViathemenu"Terminal"|"componentlist"orCTRL+Fkeysto
displaythecomponentlist.
5.4. Uploadingdiagnosticfiles
SelectthedownloadingactivityintheLLTmenu.ActivityDiagnostic Connecttotheterminal(seeConnectingtotheterminal) Selectthediagnosticfilesintheterminalviewtobeuploaded(seeFileselection). Transferthefile(s)inaPCdirectory(seeFiletransfer). Disconnect(seeDisconnectingtotheterminal). Displaycontentofdiagnosticfiles(seeFileLIFECOUNTER.DIA,FileBOOSTERDIA,File
APPDEFAULT.DIAorFileAPPCOUNTER.DIA)
5.5. Connectingtotheterminal
Beforethefirstconnection, CheckConnectionConfigurationwithterminalinfunctionofplatformMicrosoftWindowsused. makesuretheserialportcableortheUSBcableiscorrectlyconnectedtothePCandterminal. CheckTerminalisreadytobeconnectedwithLLT.TheterminalmustdisplayLLT.
Differentwaysofconnecting:
o withmouse:byclickingontheicon o viathemenu:"Terminal"|"connection"o withkeyboard:F4key
900001549R1100001_2961074108/96 Copyright2009IngenicoAllrightsreserved
Graphicmode:
1. IfOptionUSBEnumison(yes)(seeFileLLT.INT)PriorityisgiventoUSBlink.IfmorethenoneterminalareconnectedwithUSBlinks,alistoflinksisproposed.IfnoterminalconnectedwithUSBlinks,theconnection ismadewiththeportselected intheConnexion|Configurationconnexiondialog.
2. IfOptionUSBEnumisoff(no)
TheconnectionismadewiththeportselectedintheConnexion|Configurationconnexiondialog.
Commandemode(voirCommandmode):
1. IfOptionUSBEnumison(yes)(seeFileLLT.INT)PriorityisgiventoUSBlink.IfoneterminalconnectedwithUSBlinks,theconnectionismadewiththisport.Ifmore thanoneorno terminalconnectedwithUSB links, theconnection ismadewith theportspecifiedinthecommandline(xnumberofport)or(ifomitted)thelastportusedbyLLT.
2. IfOptionUSBEnumisoff(no)Theconnectionismadewiththeportspecifiedinthecommandline(xnumberofport)or(ifomitted)thelastportusedbyLLT.
5.6. Disconnectingtotheterminal
TheterminalwillonlyactivatetransferredfilesonceLLTisdisconnectedfromtheterminal. Differentwaysofdisconnecting:
Withmouse:byclickingontheicon Viathemenu:"Terminal"|"disconnection"Withkeyboard:CTRL+F4keys
5.7. Selectionandfiletransfer
5.7.1. FileselectionThe selection of .Mxx (Mxx corresponding to the catalog file extension ) allows the user to view onlycatalogfilesoftheselection.Insuchmode,ifacatalogfiletransferiscarriedout,allfilespresentinthatfilewillbetransferred,exceptedthecatalogfiles(*.Mxxextension).
Selecting *.* in the list associated to the file list, allows the user to view all files and subdirectoriesfromthecurrentdirectory.Inthismodeallselectedfileswillbetransferred.
5.7.1.1. Selectingafilewithmouse:clickingonthefilewithkeyboard:NavigatingwithUpandDownkeysonceviewisselected(seeSelectingaLLTview)
900001549R1100001_2961074109/96 Copyright2009IngenicoAllrightsreserved
5.7.1.2. Selectingagroupofcontiguousfileswithmouse:selectionismadeinthesamewayasWindowsExplorerwithkeyboard:selectionismadeinthesamewayasWindowsExplorer
5.7.1.3. Selectingagroupofnoncontiguousfileswithmouse:selectionismadeinthesamewayasWindowsExplorer.withkeyboard:notsupported.
5.7.1.4. Selectingallthefileswithkeyboard:onceviewisselected(seeSelectingaLLTview),presssimultaneouslyCtrlandAkeys.
5.7.1.5. Unselectingallthefileswithmouse:clickingonafreespaceintheview.
5.7.2. FiletransferOnceconnectionhasbeenestablished.(SeeConnectingtotheterminal)andoncefileshavebeenselected(seeFileselection).Viathemenu"Terminal"|"filedownloading"or"Terminal"|"fileuploading"Withmouse:draganddropinthecorrespondingwindow.Withkeyboard:F2ouCTRL+F2keys
Bydefaulttheremotedownloadingactivityisselected.MaintenanceanddiagnosticsactivitiesarealsopossiblefromLLTbyselectingthemenu"Activity".
5.7.3. CopyFileListYoucancopythelistofselectedfilefromthecurrentviewtotheclipboardwiththepopupmenuorwiththeCTRL+Ckeys.
900001549R1100001_29610741010/96 Copyright2009IngenicoAllrightsreserved
5.8. Displayingandconsultation
5.8.1. DirectaccesstoadirectoryofthecomputerSelectthedirectoryinthelistofthefavouritedirectories.
Toaddapathinthelistselectadirectoryinthetreeviewthen UseSHIFT+Inskeys Orusethepopupmenu(withtherightbuttonofthemouse).
Todeleteapathinthelist,selectthedirectorynameinthetreeviewthen UseSHIFT+DELkeys Orusethepopupmenu(withtherightbuttonofthemouse).
WhentheLLTapplicationisclosed,thecurrentdirectoryisstoredinthelistofthefavouritedirectories.AtthenextLLTexecution,thisdirectorywillbethecurrentdirectory.
5.8.2. DirectaccesstoadirectoryofthecomputerFromPCViewuseCTRLJkeystogotoTerminalvieworclickontheTerminalview.FromTerminalViewuseCTRLKkeystogotoPCvieworclickonthePCview.
5.8.3. DirectaccesstoadirectoryofthecomputerAdoubleclickonthefileitselforpressReturnkeyafterselectingthefiledisplaysinawindowthefilecontentsintextmode.
900001549R1100001_29610741011/96 Copyright2009IngenicoAllrightsreserved
5.8.4. Componentsignatureconsultation
Select*.*inthelist thenDoubleclickonthe*GNcorrespondingtoasignedcomponenttoconsult(OptionCertif_SGNon).
5.8.5. ComponentsignatureconsultationOnce connection has been established, terminal characteristics can be consulted Via the menu
"Terminal"|"Information"orbyclickingonicon orwithCTRL+Ikeys.
900001549R1100001_29610741012/96 Copyright2009IngenicoAllrightsreserved
900001549R1100001_29610741013/96 Copyright2009IngenicoAllrightsreserved
5.9. Displayingandconsultation
5.9.1. Consultingcatalogfile
Thecatalogdescription isdisplayedeachtimeacatalogfileisselected.
ContextualmenuorF9keyafterselectingafile.allowstheusertoviewthecatalogfilecontentsandalsoviewingtheassociateddescriptorfileandthesignedfile(seeComponentsignatureconsultation)contentsbyselectingitinthefilelist.
900001549R1100001_29610741014/96 Copyright2009IngenicoAllrightsreserved
5.9.2. Consultingcatalogfile
UsecontextualmenuorF7keyafterselectingfiles.Thisallowstheusertocreatecatalogfilesforanotherproducttypefromanexistingone.
5.9.3. ConsultingcatalogfileThisfunctionallowstheusertocreateacatalogfilelisttodownload.Thisfunctionisonlyaccessibleafterselectingthe*.Mxx(Mxxcorrespondingtothecatalogfileextension)inthelistassociatedtothefilelist.Selectingthecatalogfilestoincludethenusethecontextualmenu
900001549R1100001_29610741015/96 Copyright2009IngenicoAllrightsreserved
orF8keytocreateanewcatalogfilegroupingseveralcatalogfilesforasameterminalstoredinthesamedirectory.
5.9.4. DeletionofacatalogfileWhenyoudeleteacatalog file, thesoftwaredeletesassociated files,only if theyarenotusedbyotherfiles.
900001549R1100001_29610741016/96 Copyright2009IngenicoAllrightsreserved
6. FileLIFECOUNTER.DIA
6.1. FileLIFECOUNTER.DIA
ForviewaLifeCounter.diafile,youmustdoubleclickonthefile,andafterthe informationofthisfilearedecodedinawindow.
7. FileBOOSTERDIA
7.1. ConsultingofBoosterdiafiles:
For view aBooster.dia file, youmustdoubleclickon the file, and after the informationof this file aredecodedinawindow.
900001549R1100001_29610741017/96 Copyright2009IngenicoAllrightsreserved
8. FileAPPDEFAULT.DIA
8.1. ConsultationofAppDefault.dia.files:
ForviewaAppDefault.diafile,youmustdoubleclickonthefile,andafterthe informationofthisfilearedecodedinawindow.
9. FileAPPCOUNTER.DIA
9.1. ConsultationofAppCounter.dia.files:
ForviewaAppCounter.diafile,youmustdoubleclickonthefile,andaftertheinformationofthisfilearedecodedinawindow.
900001549R1100001_29610741018/96 Copyright2009IngenicoAllrightsreserved
900001549R1100001_29610741019/96 Copyright2009IngenicoAllrightsreserved
10. LLTSetting
10.1. FileLLT.INT
ItconfiguresLLT.Optionslist(yes/no):RemoteDirectory(yesdefaultvalue):displayingnetworkdisks.Certif_SGN(nodefaultvalue):displayingcertificateof*.?GNfiles.Auto_bmk(nodefaultvalue):automaticstorageoflastdirectoryused(inbmkfile).EnumUSB(yesdefaultvalue):automaticenumerationofterminalsconnectedtoPCusinganUSBlink.Example:
;LLTconfiguration;[Protocol]ConnectionName=LLTConnection ;nameofconnectiondefinedvia
;remotenetwork[Files]Language=LLT.lng ;nameoflanguagefiletobeusedCataExt=LLT.prm ;namelistofcatalogfileextensionsBookmark=LLT.bmk ;listofthefavouritedirectories[Options]RemoteDirectory=no ;nodisplayingnetworkdisksintheLLTexplorerCertif_SGN=yes;displayingcertificateof*GNfiles
900001549R1100001_29610741020/96 Copyright2009IngenicoAllrightsreserved
10.2. FileLLT.PRM
ItallowstheusertodefineproductcodelistdefinedforEFTandtheassociatedterminaldescription.Thisproductcodecorrespondstocatalogfilesextension.Syntax:Mxy:productdescriptionExample:M30:stationaryM31:portable
10.3. FileLLT.LNG
It contains the list of messages to be displayed by LLT. These messages are written in 2 differentlanguages:thelocallanguage(Englishbydefault)andFrench.
10.4. FileLLT.BMK
ItcontainsthelistofthefavouritedirectoriesthattheusercanaccessinoneclickfromLLT.Theusercanwritethedirectoriestobeaccessedeasilyinit.
10.5. ChangingLLTlanguage
Atfirststartup,LLTscreensaredisplayedinEnglish.ThelanguagemaybemodifiedviatheMenu"Language"orfunctionkeysCTRL+EorCTRL+L.Atnextstartup,LLTscreenswillbedisplayedinthelastselectedlanguage.
10.6. Defininganewtranslationlanguage
Alanguagefile(filewithextension.lng)isusedtotranslatethedifferentscreens,menus,andmessagesofthetool.Bydefaultthisfilecontains2languages(EnglishandFrench).Nevertheless,anylanguagecanbeused.Tousethelocallanguage,replaceinthelanguagefiletheFrenchtranslationbythelocaltranslation.
900001549R1100001_29610741021/96 Copyright2009IngenicoAllrightsreserved
10.7. LLTuseincommandmode
10.7.1. Actionsc=downloadingthefileslistedincatalogfileu=uploadingthefileslistedincatalogfiled=deletingthefileslistedincatalogfile
10.7.2. Switchesr=filenamewhereisstoredtheresultingcode(ifomitted,returncodewillbestoredinResBatch.txtintheLLTinstallationdirectorye = name of the directory in the terminal where are downloaded the files contained in catalog file(downloadingmode)orfromwhereareuploadedthefilescontained incatalogfile(uploadingmode)orwherearedeletedthefilescontainedincatalogfile(deletingmode)(ifomitted,swapdisk)a=numberofactivity(ifomitted,1)(1=downloading,2=diagnostic,3=maintenance)x=numberofserialport(ifomitted,lastportusedbyLLT)n=withoutdialogboxdisplayed
10.7.3. Syntax
Downloading:LLT.EXE c r a ex
Uploading:LLT.EXE u r a ex
Deleting:LLT.EXE d r a ex
900001549R1100001_29610741022/96 Copyright2009IngenicoAllrightsreserved
10.7.4. ReturncodesThedownloadingreturncodeisnumericalASCIIcodedintheresultingfilefollowedbyatext.
"0":OK"1":missingparameter"2":catalogfileaccessproblem"3":resultingfileaccessproblem"4":downloadablefilesaccessproblem"5":LLTalreadyrunning"6":LLTconfiguringfilemissing(LLT.INI,LLT.LNG,LLT.PRM)"7":connectionname("LLTConnection")notfoundinWindowsRAS."8":PPPconnectionproblem(RASerror+errornumber)"9":FTPconnectionproblem"10":FTPerrorduringfiletransfer"11":terminalnotrespondingoncePPPconnectionhasbeenestablished
"12":LLTcannotberunonsuchWindowsplatform"13":LLTidentificationnotrecognizedbytheterminal"14":unauthorizedactivity"15":activitybadlyfinished"17":cannotdownloadafileadiagnosticactivity"18":cannotfoundtheRASphonebook"19":COMportunknown
900001549R1100001_29610741023/96 Copyright2009IngenicoAllrightsreserved
10.7.5. Returncodes Catalogfilename:31140210.M30
Withvalues:;DownloadfilestoSWAP31140210.ADF31140210.SGN;ChangedestinationdirectoryanddownloadafileeHOSTParam.txt
Commandefile:LoadingTest.batWithvalues:
@echooffsetPATH=C:\ProgramFiles\TELIUMTools\LLTsetNB=1set/PPORT=EnterCOMportnumberor[ENTER]forCOM%NB%:if.%PORT%.==..gotoLabel0setNB=%PORT%:Label0echoEnterLLTToolsinstalldirectoryor[ENTER]forset/pLLT_TOOLS="%PATH%":if.%LLT_TOOLS%.==..gotoLabel1setPATH=%LLT_TOOLS%:Label1setLLT="%PATH%\LLT.EXE"echoLaunchLLTToolsontheterminalset/pT=When"LLT"displayed,pressakeytocontinue...echoCatalogueloadinginprogress...%LLT%c31140210.M30eSWAPa1x%NB%echoLoadingisfinished.set/pT=Pressakeytocontinue...
10.8. DisplayingtheUSBconnectionportnumber
LaunchtheDevicemanagerpanelviathemenuConnection|DevicemanagerofLLT.
900001549R1100001_29610741024/96 Copyright2009IngenicoAllrightsreserved
900001549R1100001_29610741025/96 Copyright2009IngenicoAllrightsreserved
11. Appendices
11.1. Listofshortcutkeys
Each LLT function is accessible via the menu and is also accessible via a keyboard function key or acombinationofthesekeys.Thistoolcanbeusedwithoutamouse,eachmenufunctionisalsoaccessiblebypressingALT+menuletter.Oncethemenuisopened,accesstosubmenusisavailableviathekeyboardbypressingSHIFT+letterofsubmenu.
Function Short Cut Connecttoterminal F4Disconnectfromterminal CTRL+F4Filesdownloading F2Filesuploading CTRL+F2Refreshtheviewcontents F5Creatingacatalogfilefromanexistingone F7Creatingafamily F8Consultacatalogfile F9Changealanguage CTRL+E(English) CTRL+L(Locallanguage)Openafileoradirectory ReturnkeyDeletesomefilesfromtheview DelkeySelectthefavouritedirectorylist SHIFT+FAddadirectorytothefavouritedirectorylist SHIFT+InsDeleteadirectoryfromthefavouritedirectorylist SHIFT+DelSelectallthefiles CTRL+AGobacktotheparentdirectory CTRL+BCopyfilelistfromtheviewtoclipboard CTRL+CDisplaythelistofmodulespresentintheterminal CTRL+FTerminalInformation CTRL+ITerminalviewisactiveview CTRL+JPCviewisactiveview CTRL+KExitfromLLT CTRL+Q
11.2. ListoficonsandtheirfunctionForeachviewaniconbarallowstheusertoaccesstosomefunctions.
Use iconorDelkeyorpopupmenu todeleteselected file(s) fromthecurrentviewand fromthecorrespondingdirectory(Note: Suchfunctioncanbeunauthorisedontheterminal).Whenyoudeleteacatalogfile,thesoftwaredeleteassociatedfiles,onlyiftheyarenotusedbyotherfiles.
Use iconorF5keyrefreshviewcontents.
permetdevisualiserdans l'ordre lesfichiersde lavuesous laformede:grandes icnes,petitesicnes,liste,oudtails.
Use iconorCTRL+Bkeynavigateandviewtheparentdirectory.
11.3. ProblemsandSolutions
Someerrorsareclassifiedbycode,theirdescriptionisgivenbelowinordertocheckpotentialproblems.Errornumber error Whattodo?Ras602 Theportisalreadyopen. The serial port used by LLT is already used by another
application.Ras624 RasPhone2000.pbk FirstlocatetheRasphone2000.pbkfile(filelocatedintheRAS
subdirectoryoftheLLTdirectoryapplication)andmakesurethatthereadonlyfilepropertyinthePropertiesdialogboxisnotselected.
Ras629 Theportwasdisconnectedbytheremotemachine.
Check thathardware flow controlhardware is still activatedonLLTorcheckthatterminaliswaitingforconnection.
Ras633 The remote computer is inused
CheckUSBportispresentinthelistofmodemorcheckiftheUSBcableisconnectedtotheUSBportdeclaredonPC.
Ras721 The remote computer didnotrespond.
ThepluggedportCOMxisnotselected.SeechapterSelectingcommunicationportorseechapterInstallingthenullmodemdrivertodefinetheusedserialinterface.
Ras651orRas777
Yourconnectingdevicehasreportedanerror.
Terminalisnotresponding.Checkconnection(checktheserialcable or USB cable is correctly plugged) and check thatterminal is waiting for a connection. If not check SelectingcommunicationportorInstallingthenullmodemdriver.
FTP12002 Internetconnected StoptheWificonnectiononthePC.FTP12163 Internetdisconnected InwebbrowserdeletecheckfromtheProperty"workingoff
line" LLT displays PPP
Connected thenautomaticallydisconnecting
LLTusesport IP6000fordataexchange.Checkthattheuseof this port is not forbidden by the network administration(Firewall,VirtualPrivateNetwork(VPN))orchecktheport isnotusedbyanotherapplication.
LLT displays Absence ofterminalanswer
LLTusesport IP6000fordataexchange.Checkthattheuseof thisport (or the LLT application) isnot forbiddenby thenetwork administration (Firewall, Virtual Private Network(VPN))orchecktheportisnotusedbyanotherapplication.
900001549R1100001_29610741026/96 Copyright2009IngenicoAllrightsreserved
12. ConnectionConfigurationwithterminal
ConnectionconfigurationisdifferentfollowingtheMicrosoftWindowsplatformused.
12.1. WithWindows2000Professional
12.1.1. ConnectionwithserialinterfaceTobeconnected toa terminalaserialcablemustbeused.Configure thePCbyselectinganullmodemdriverandselecttheserialportthatwillbeusedwiththisconnection.
12.1.1.1. InstallingthenullmodemdriverConfiguretheserialinterfaceviathemenu.Connection|SerialinterfacepropertiesofLLT.If no modem has been installed on this computer, the following screen appears:
900001549R1100001_29610741027/96 Copyright2009IngenicoAllrightsreserved
Keyinanyvalueforyourareacode,thenclosethewindowbybuttonOK.
Click"Add"buttontoinstallthenullmodemdriver.Then,
900001549R1100001_29610741028/96 Copyright2009IngenicoAllrightsreserved
Checktheoption"Don'tdetectmymodem; Iwillselect itfroma list"andthenclick"Next"buttontoselectthenullmodemdriverfromalist.
Inthatcaseselect(StandardsModemTypes)fromthelistManufacturersandCommunicationscablebetweentwocomputersfromthelist"Models".Thenclick"Next"buttontoselecttheserialportthatwillbeusedfortheconnection.
900001549R1100001_29610741029/96 Copyright2009IngenicoAllrightsreserved
SelectaspecificportorAllportsifyouwanttobeabletouseeitheroneortheother.
Continuebyclicking"Next"button
Thenclick"Finish".
Thenewinterfaceappearsnowfromthelist.
900001549R1100001_29610741030/96 Copyright2009IngenicoAllrightsreserved
Click"Properties"buttontoconfiguretheserialinterface.In"General"tab,
SelecttheMaximumPortSpeed:115200.ClickOKofthedifferentwindowsthathavebeenopenedtovalidatealltheseparametersandterminatethisconfiguration.
900001549R1100001_29610741031/96 Copyright2009IngenicoAllrightsreserved
12.1.1.2. Useofanotherserialport It ispossibletodefineseveralserialports inordertoselect latertheavailableportduringstepSelectingcommunicationport.Todefineanew interfaceandanewserialport (forexampleusingCOM2),repeatforthenewportthestepsdescribedinInstallingthenullmodemdriver.
12.1.1.3. Selectingcommunicationport SelecttheserialportusedfromConnection|ConnectionconfigurationofLLTmenu.Selecttheporttousefromdevicelist
If the serialport is not displayed in the device list, check if it has correctlybeen defined (see chapterInstallingthenullmodemdriver).
12.1.1.4. Communicationportconfiguration UsedcommunicationportconfigurationismadefromLLTmenuConnection|Connectionconfiguration
900001549R1100001_29610741032/96 Copyright2009IngenicoAllrightsreserved
ClickConfigure
Thenchooseinitialspeed:115200andenablehardwareflowcontrol.
900001549R1100001_29610741033/96 Copyright2009IngenicoAllrightsreserved
Click OKinthedifferentopenedwindowstovalidthesesettings.
12.1.2. ConnectionwithUSBcable TobeconnectedtoaterminalaUSBcablemaybeusediftheterminalsoftwareconfigurationauthorizesit.
12.1.2.1. TeliumUSBdriverinstallation PuttheterminalinLLTmode(terminalmustdisplayLLT). ConnectUSBcablebetweenterminal(USBSlave)andPC(USBHost).
WhenyouplugtheterminalwithUSBcable,Windows2000detectsthenewdevice.
ThensuggestinstallinganewdriverinordertomanageUSBterminalconnection.
900001549R1100001_29610741034/96 Copyright2009IngenicoAllrightsreserved
Click"Next"
Click"Next"toselectUSBdriverforconnectedTerminal.
900001549R1100001_29610741035/96 Copyright2009IngenicoAllrightsreserved
Click"Next"andgivethedirectoryofLLTapplication
andconfirmbyOK.Ifthedriverhasbeenfound,thefollowingscreenisdisplayed:
900001549R1100001_29610741036/96 Copyright2009IngenicoAllrightsreserved
Click"Next"
900001549R1100001_29610741037/96 Copyright2009IngenicoAllrightsreserved
Then"Finish".Now,theUSBdriverisinstalledandreadytobeused.TheUSBconnectionisseenbyLLTasaserialport.Youmustconfigurethisnewport(SeeInstallingthenullmodemdriver).ChoosethenewportwhichisdisplayedinthelistcorrespondingtotheestablishedUSBconnection.
Now,thenewcommunicationcableappearsfromthelist.
900001549R1100001_29610741038/96 Copyright2009IngenicoAllrightsreserved
ClickOK.SelecttheserialportusedfromConnection|ConnectionconfigurationofLLTmenu.Selecttheporttousefromdevicelist
900001549R1100001_29610741039/96 Copyright2009IngenicoAllrightsreserved
andclickOK.Now,yourconnectionisconfigured.YoucanconnecttheLLTtotheterminal(seeConnectingtotheterminal).
12.2. WithWindows2003Serveur
12.2.1. ConnectionwithserialinterfaceTobeconnected toa terminalaserialcablemustbeused.Configure thePCbyselectinganullmodemdriverandselecttheserialportthatwillbeusedwiththisconnection.
900001549R1100001_29610741040/96 Copyright2009IngenicoAllrightsreserved
12.2.1.1. InstallingthenullmodemdriverConfiguretheserialinterfaceviathemenu.Connection|SerialinterfacepropertiesofLLT.Ifnomodemhasbeeninstalledonthiscomputer,thefollowingscreenappears:
Click"Add"buttontoinstallthenullmodemdriver.Then,
900001549R1100001_29610741041/96 Copyright2009IngenicoAllrightsreserved
Checktheoption"Don'tdetectmymodem; Iwillselect itfroma list"andthenclick"Next"buttontoselectthenullmodemdriverfromalist.
Inthatcaseselect(StandardsModemTypes)fromthelistManufacturersandCommunicationscablebetweentwocomputersfromthelist"Models".Thenclick"Next"buttontoselecttheserialportthatwillbeusedfortheconnection.
900001549R1100001_29610741042/96 Copyright2009IngenicoAllrightsreserved
SelectaspecificportorAllportsifyouwanttobeabletouseeitheroneortheother.Continuebyclicking"Next"button
900001549R1100001_29610741043/96 Copyright2009IngenicoAllrightsreserved
Thenclick"Finish".Thenewinterfaceappearsnowfromthelist.
Click"Properties"buttontoconfiguretheserialinterface.In"Modem"tab,
selecttheMaximumPortSpeed:115200.ClickOKofthedifferentwindowsthathavebeenopenedtovalidatealltheseparametersandterminatethisconfiguration.
12.2.1.2. UseofanotherserialportIt ispossibletodefineseveralserialports inordertoselect latertheavailableportduringstepSelectingcommunicationport.Todefineanew interfaceandanewserialport (forexampleusingCOM2),repeatforthenewportthestepsdescribedinInstallingthenullmodemdriver.
12.2.1.3. SelectingcommunicationportSelecttheserialportusedfromConnection|ConnectionconfigurationofLLTmenu.Selecttheporttousefromdevicelist
900001549R1100001_29610741044/96 Copyright2009IngenicoAllrightsreserved
If the serialport is not displayed in the device list, check if it has correctlybeen defined (see chapterInstallingthenullmodemdriver).
900001549R1100001_29610741045/96 Copyright2009IngenicoAllrightsreserved
12.2.1.4. CommunicationportconfigurationUsedcommunicationportconfigurationismadefromLLTmenuConnection|Connectionconfiguration
ClickConfigure
900001549R1100001_29610741046/96 Copyright2009IngenicoAllrightsreserved
Thenchooseinitialspeed:115200andenablehardwareflowcontrol.
Click OKinthedifferentopenedwindowstovalidthesesettings.
12.2.2. ConnectionwithUSBcableTobeconnectedtoaterminalaUSBcablemaybeusediftheterminalsoftwareconfigurationauthorizesit.
12.2.2.1. USBTeliumdriverInstallation PuttheterminalinLLTmode(terminalmustdisplayLLT). ConnectUSBcablebetweenterminal(USBSlave)andPC(USBHost).
WhenyouplugtheterminalwithUSBcable,Windows2000detectsthenewdevice.
ThensuggestinstallinganewdriverinordertomanageEFT30USBterminalconnection
900001549R1100001_29610741047/96 Copyright2009IngenicoAllrightsreserved
Click"Next"
900001549R1100001_29610741048/96 Copyright2009IngenicoAllrightsreserved
Click"Next"andgivethedirectoryofLLTapplication
900001549R1100001_29610741049/96 Copyright2009IngenicoAllrightsreserved
Click"Next". Ifthefilehasbeenfound,thefollowingscreenisdisplayed:
900001549R1100001_29610741050/96 Copyright2009IngenicoAllrightsreserved
Click"Next".
Then"Finish".Now,theUSBdriverisinstalledandreadytobeused.TheUSBconnectionisseenbyLLTasaserialport.Youmustconfigurethisnewport
900001549R1100001_29610741051/96 Copyright2009IngenicoAllrightsreserved
(SeeInstallingthenullmodemdriver).ChoosethenewportwhichisdisplayedinthelistcorrespondingtotheestablishedUSBconnection.
Now,thenewcommunicationcableappearsfromthelist.
900001549R1100001_29610741052/96 Copyright2009IngenicoAllrightsreserved
ClickOK.SelecttheserialportusedfromConnection|ConnectionconfigurationofLLTmenu.Selecttheporttousefromdevicelist
900001549R1100001_29610741053/96 Copyright2009IngenicoAllrightsreserved
andclickOK.Now,yourconnectionisconfigured.YoucanconnecttheLLTtotheterminal(seeConnectingtotheterminal).
900001549R1100001_29610741054/96 Copyright2009IngenicoAllrightsreserved
12.3. WithWindowsXPProfessional
12.3.1. ConnectionwithserialinterfaceTobeconnectedtoaterminalaserialcablemustbeused.ForthatconfigurethePCbyselectinga nullmodemdriveranddeterminetheserialportthatwillbeusedwiththisconnection.
12.3.1.1. InstallingthenullmodemdriverConfiguretheserialinterfaceviathemenu.Connection|SerialinterfacepropertiesofLLT.Ifnomodemhasbeeninstalledonthiscomputer,thefollowingscreenappears:
Keyinanyvalueforyourareacode,thenclosethewindowbybuttonOK.
900001549R1100001_29610741055/96 Copyright2009IngenicoAllrightsreserved
Click"Add"buttontoinstallthenullmodemdriver.Then,
900001549R1100001_29610741056/96 Copyright2009IngenicoAllrightsreserved
Checktheoption"Don'tdetectmymodem; Iwillselect itfroma list"andthenclick"Next"buttontoselectthenullmodemdriverfromalist.
900001549R1100001_29610741057/96 Copyright2009IngenicoAllrightsreserved
Inthatcaseselect(StandardsModemTypes)fromthe listManufacturersandCommunicationscablebetweentwocomputersfromthelist"Models".Thenclick"Next"buttontoselecttheserialportthatwillbeusedfortheconnection.
900001549R1100001_29610741058/96 Copyright2009IngenicoAllrightsreserved
SelectaspecificportorAllportsifyouwanttobeabletouseeitheroneortheother.Continuebyclicking"Next"button
thenclick"Finish".Thenewinterfaceappearsnowfromthelist.
900001549R1100001_29610741059/96 Copyright2009IngenicoAllrightsreserved
Click"OK"tovalidatethesesettings.
12.3.1.2. UseofanotherserialportItispossibletodefineseveralserialportsinordertoselectlatertheavailableport(SeechapterSelectingcommunicationport).Todefineanewinterfaceandanewserialport(forexampleusingCOM2),repeatthepreviousstepdescribedinInstallingthenullmodemdriver
12.3.1.3. SelectingcommunicationportSelecttheserialportusedfromConnection|ConnectionconfigurationLLTmenu.Selecttheporttouseinthedevicelist.
Iftheserialport isnotdisplayed inthedevice list,check if ithascorrectlydefined(seechapterInstallingthenullmodemdriver).BeforeusingLLTapplicationcheckthatLLTcableiscorrectlypluggedintotherightserialconnector.
900001549R1100001_29610741060/96 Copyright2009IngenicoAllrightsreserved
12.3.1.4. CommunicationportconfigurationUsedcommunicationportconfigurationismadefromLLTmenuConnection|Connectionconfiguration
ClickConfigure
Thenchooseinitialspeed:115200andenablehardwareflowcontrol.
900001549R1100001_29610741061/96 Copyright2009IngenicoAllrightsreserved
Click OKinthedifferentopenedwindowstovalidthesesettings.
12.3.2. ConnectionwithUSBcableTobeconnectedtoaterminal,anUSBcablemaybeusediftheterminalsoftwareconfigurationauthorizesit.
12.3.2.1. TeliumUSBdriverInstallation PuttheterminalinLLTmode(terminalmustdisplayLLT). ConnectUSBcablebetweenterminal(USBSlave)andPC(USBHost).
WhenyouplugtheterminalwithUSBcable,WindowsXPsuggeststoinstallanewdriverinordertomanageUSBterminalconnection.
Click"Next"
900001549R1100001_29610741062/96 Copyright2009IngenicoAllrightsreserved
ClickBrowsetoselectthedriverssubdirectorylocatedintheLLTinstallationdirectory.ThenclickNext.
Then"Finish".Now,theUSBdriverisinstalledandreadytobeused.TheUSBconnectionisseenbyLLTasaserialport.Youmustconfigurethisnewport(Installingthenullmodemdriver).ChoosethenewportwhichisdisplayedinthelistcorrespondingtotheestablishedUSBconnection.
900001549R1100001_29610741063/96 Copyright2009IngenicoAllrightsreserved
Now,thenewcommunicationcableappearsfromthelist.
ClickOK.
900001549R1100001_29610741064/96 Copyright2009IngenicoAllrightsreserved
SelecttheserialportusedfromConnection|ConnectionconfigurationofLLTmenu.Selecttheporttousefromdevicelist
andclickOK.Now,yourconnectionisconfigured.YoucanconnecttheLLTtotheterminal(seeConnectingtotheterminal).
12.4. WithWindowsVistaProfessional
12.4.1. ConnectionwithserialinterfaceTobeconnectedtoaterminalaserialcablemustbeused.ForthatconfigurethePCbyselectinga nullmodemdriveranddeterminetheserialportthatwillbeusedwiththisconnection.
12.4.1.1. InstallingthenullmodemdriverConfiguretheserialinterfaceviathemenu.Connection|SerialinterfacepropertiesofLLT.Ifnomodemhasbeeninstalledonthiscomputer,thefollowingscreenappears:
900001549R1100001_29610741065/96 Copyright2009IngenicoAllrightsreserved
Click"Add"buttontoinstallthenullmodemdriver.Then,
Check theoption"Don'tdetectmymodem; Iwillselect it froma list"and thenclick"Next"button toselectthenullmodemdriverfromalist.
900001549R1100001_29610741066/96 Copyright2009IngenicoAllrightsreserved
Inthatcaseselect(StandardsModemTypes)fromthe listManufacturersandCommunicationscablebetweentwocomputersfromthelist"Models".Thenclick"Next"buttontoselecttheserialportthatwillbeusedfortheconnection.
SelectaspecificportorAllportsifyouwanttobeabletouseeitheroneortheother.Continuebyclicking"Next"button
900001549R1100001_29610741067/96 Copyright2009IngenicoAllrightsreserved
thenclick"Finish".Thenewinterfaceappearsnowfromthelist.
900001549R1100001_29610741068/96 Copyright2009IngenicoAllrightsreserved
Click"OK"tovalidatethesesettings.
900001549R1100001_29610741069/96 Copyright2009IngenicoAllrightsreserved
12.4.1.2. UseofanotherserialportIt is possible to define several serial ports in order to select later the available port (See Selectingcommunicationport).Todefineanewinterfaceandanewserialport(forexampleusingCOM2),repeatthepreviousstepdescribedinInstallingthenullmodemdriver
12.4.1.3. SelectingcommunicationportSelecttheserialportusedfromConnection|ConnectionconfigurationLLTmenu.Selecttheporttouseinthedevicelist.
Iftheserialportisnotdisplayedinthedevicelist,checkifithascorrectlydefined(seeInstallingthenullmodemdriver)BeforeusingLLTapplicationcheckthatLLTcableiscorrectlypluggedintotherightserialconnector.
900001549R1100001_29610741070/96 Copyright2009IngenicoAllrightsreserved
12.4.1.4. CommunicationportconfigurationUsedcommunicationportconfigurationismadefromPCmenustart|Parameter|configurationmanager|Modemsandtelephonieoptions|Modem
SelecttheportandclickProperties
900001549R1100001_29610741071/96 Copyright2009IngenicoAllrightsreserved
CliquersurUpdateparameters.
900001549R1100001_29610741072/96 Copyright2009IngenicoAllrightsreserved
SelectModemandchoose,maximalespeedforport:115200. SelectAdvancedandChangeDefaultPreference,verifyPortspeedandFlowcontrol(None).ClickOKinthedifferentopenedwindowstovalidthesesettings WARNING:ThePCmustberestarted.
12.4.2. ConnectionwithUSBcableTobeconnectedtoaterminal,anUSBcablemaybeusediftheterminalsoftwareconfigurationauthorizesit.
12.4.2.1. TeliumUSBdriverInstallation PuttheterminalinLLTmode(terminalmustdisplayLLT). ConnectUSBcablebetweenterminal(USBSlave)andPC(USBHost).
WhenyouplugtheterminalwithUSBcable,WindowsVistasuggeststoinstallanewdriverinordertomanageUSBterminalconnection
ClickFindandinstallsoftwaredriver(recommended)
900001549R1100001_29610741073/96 Copyright2009IngenicoAllrightsreserved
ClickDontsearchinline
900001549R1100001_29610741074/96 Copyright2009IngenicoAllrightsreserved
ClickFindsoftwaredriveronmycomputer
900001549R1100001_29610741075/96 Copyright2009IngenicoAllrightsreserved
ClickBrowsetoselectthedriverssubdirectorylocatedintheLLTinstallationdirectory.ThenclickNext.
ClickInstall
900001549R1100001_29610741076/96 Copyright2009IngenicoAllrightsreserved
Then"Finish".Now,theUSBdriverisinstalledandreadytobeused.TheUSBconnectionisseenbyLLTasaserialport.Youmustconfigurethisnewport(SeeInstallingthenullmodemdriver).ChoosethenewportwhichisdisplayedinthelistcorrespondingtotheestablishedUSBconnection.
900001549R1100001_29610741077/96 Copyright2009IngenicoAllrightsreserved
Now,thenewcommunicationcableappearsfromthelist.ClickOK.SelecttheserialportusedfromConnection|ConnectionconfigurationofLLTmenu.Selecttheporttousefromdevicelist
900001549R1100001_29610741078/96 Copyright2009IngenicoAllrightsreserved
andclickOK.Now,yourconnectionisconfigured.YoucanconnecttheLLTtotheterminal(Connectingtotheterminal).
12.5. WithWindowsSevenProfessional
12.5.1. ConnectionwithserialinterfaceTobeconnectedtoaterminalaserialcablemustbeused.ForthatconfigurethePCbyselectinganullmodemdriveranddeterminetheserialportthatwillbeusedwiththisconnection.
12.5.1.1. InstallingthenullmodemdriverConfiguretheserialinterfaceviatheLLTmenu:Connection|Serialinterfaceproperties.Ifnomodemhasbeeninstalledonthiscomputer,thefollowingscreenappears:
900001549R1100001_29610741079/96 Copyright2009IngenicoAllrightsreserved
Click"Add"buttontoinstallthenullmodemdriver.
900001549R1100001_29610741080/96 Copyright2009IngenicoAllrightsreserved
ChecktheoptionDon'tdetectmymodem;IwillselectitfromalistandthenclickNextbuttontoselectthenullmodemdriverfromalist.
900001549R1100001_29610741081/96 Copyright2009IngenicoAllrightsreserved
In thatcaseselect (StandardsModemTypes) from the listManufacturerandCommunicationscablebetweentwocomputersfromthelist"Models".ThenclickNextbuttontoselecttheserialportthatwillbeusedfortheconnection.
900001549R1100001_29610741082/96 Copyright2009IngenicoAllrightsreserved
SelectaspecificportorAllportsifyouwanttobeabletouseeitheroneortheother.
ContinuebyclickingNextbutton
thenclickFinish.
Thenewinterfaceappearsnowfromthelist.
900001549R1100001_29610741083/96 Copyright2009IngenicoAllrightsreserved
ClickOKtovalidatethesesettings.
12.5.1.2. UseofanotherserialportItispossibletodefineseveralserialportsinordertoselectlatertheavailableport(SeechapterSelectingcommunicationport.Todefineanewinterfaceandanewserialport(forexampleusingCOM2),repeatthepreviousstepdescribedinInstallingthenullmodemdriver
12.5.1.3. SelectingcommunicationportSelecttheserialportusedviatheLLTmenu:Connection|Connectionconfiguration.Selecttheporttouseinthedevicelist.Selecttheporttouseinthedevicelist.
Iftheserialportisnotdisplayedinthedevicelist,checkifithascorrectlydefined(seeInstallingthenullmodemdriver) BeforeusingLLTapplicationcheckthatLLTcableiscorrectlypluggedintotherightserialconnector.
900001549R1100001_29610741084/96 Copyright2009IngenicoAllrightsreserved
12.5.1.4. CommunicationportconfigurationSelecttheserialportusedviatheLLTmenu:Connection|Serialinterfaceproperties.
SelecttheportandclickProperties.
900001549R1100001_29610741085/96 Copyright2009IngenicoAllrightsreserved
SelectChangesettings.
900001549R1100001_29610741086/96 Copyright2009IngenicoAllrightsreserved
InModempanel,chooseMaximumPortspeed:115200.
InAdvancedpanel,selectChangeDefaultPreferences
900001549R1100001_29610741087/96 Copyright2009IngenicoAllrightsreserved
AndverifyPortspeed(115200)andFlowcontrol(None).ClickOKinthedifferentopenedwindowstovalidthesesettings.WARNING:ThePCmustberestarted.
12.5.2. ConnectionwithUSBcableTobeconnectedtoaterminal,anUSBcablemaybeusediftheterminalsoftwareconfigurationauthorizesit.
12.5.2.1. TeliumUSBdriverInstallation PuttheterminalinLLTmode(terminalmustdisplayLLT). ConnectUSBcablebetweenterminal(USBSlave)andPC(USBHost).
WhenyouplugtheterminalwithUSBcable,WindowsSevendisplaysthefollowingmessage.
ToinstallanewdriverinordertomanageUSBterminalconnection,selectviatheLLTmenu:Connection|Devicemanager.
900001549R1100001_29610741088/96 Copyright2009IngenicoAllrightsreserved
Warning:ifthedevicemanagerpanelisnotdisplayed,closeandrestarttheLLTapplication.
SelecttheUnknowndeviceand(witharightclick)UpdateDriverSoftware
Afterlocateandinstalldriversoftwaremanually(Browsemycomputerfordirversoftware):
900001549R1100001_29610741089/96 Copyright2009IngenicoAllrightsreserved
ClickBrowsetoselectthesubfolderdriversunderLLTinstallationfolderandclickNext.
CheckUSBdriveriscorrectlyinstalledandclickClose.
900001549R1100001_29610741090/96 Copyright2009IngenicoAllrightsreserved
Now,thenewdeviceisdisplayed.
900001549R1100001_29610741091/96 Copyright2009IngenicoAllrightsreserved
Now,theUSBdriverisinstalledandreadytobeused.TheUSBconnectionisseenbyLLTasaserialport.Youmustbuildthisinterface.Tobuildthisinterface,selectviatheLLTmenu:Connection|Serialinterfaceproperties.
AndselectAdd.
SelectDontdetectmymodemandclickNext
900001549R1100001_29610741092/96 Copyright2009IngenicoAllrightsreserved
SelectCommunicationcablebetweentwocomputersandclickNext
900001549R1100001_29610741093/96 Copyright2009IngenicoAllrightsreserved
SelecttheportnumberandclickNext
ClickFinish
900001549R1100001_29610741094/96 Copyright2009IngenicoAllrightsreserved
Warning: if the following screen isdisplayed, check Public networks for thisprogram (LLT) and clickAllowaccess.
Ifnot,thefollowingwindowswillbedisplayedafterLLTconnectionaction.
900001549R1100001_29610741095/96 Copyright2009IngenicoAllrightsreserved
Ingenico192avenueCharlesdeGaulle92200NeuillysurSeineFranceTl.:+33146258200Fax:+33147725695www.ingenico.com
Yourcontact
*296
1074
10*
1. INTRODUCTION2. Environment3. Software installation4. Software removal5. Use of LLT functions5.1. Software component downloading5.2. Parameter files downloading5.3. Knowing the present component list in the terminal5.4. Uploading diagnostic files5.5. Connecting to the terminal5.6. Disconnecting to the terminal5.7. Selection and file transfer5.7.1. File selection
5.7.1.1. Selecting a file5.7.1.2. Selecting a group of contiguous files5.7.1.3. Selecting a group of non contiguous files5.7.1.4. Selecting all the files5.7.1.5. Unselecting all the files5.7.2. File transfer5.7.3. Copy File List5.8. Displaying and consultation5.8.1. Direct access to a directory of the computer5.8.2. Direct access to a directory of the computer5.8.3. Direct access to a directory of the computer5.8.4. Component signature consultation5.8.5. Component signature consultation
5.9. Displaying and consultation5.9.1. Consulting catalog file5.9.2. Consulting catalog file5.9.3. Consulting catalog file5.9.4. Deletion of a catalog file
6. File LIFECOUNTER.DIA6.1. File LIFECOUNTER.DIA
7. File BOOSTER DIA7.1. Consulting of Booster dia files :
8. File APPDEFAULT.DIA8.1. Consultation of AppDefault.dia.files :
9. File APPCOUNTER.DIA9.1. Consultation of AppCounter.dia.files :
10. LLT Setting10.1. File LLT. INT10.2. File LLT.PRM10.3. File LLT.LNG10.4. File LLT.BMK10.5. Changing LLT language10.6. Defining a new translation language10.7. LLT use in command mode10.7.1. Actions10.7.2. Switches10.7.3. Syntax10.7.4. Return codes10.7.5. Return codes
10.8. Displaying the USB connection port number
11. Appendices11.1. List of short cut keys11.2. List of icons and their function11.3. Problems and Solutions
12. Connection Configuration with terminal12.1. With Windows 2000 Professional12.1.1. Connection with serial interface
12.1.1.1. Installing the null modem driver12.1.1.2. Use of another serial port12.1.1.3. Selecting communication port12.1.1.4. Communication port configuration12.1.2. Connection with USB cable
12.1.2.1. Telium USB driver installation12.2. With Windows 2003 Serveur12.2.1. Connection with serial interface
12.2.1.1. Installing the null modem driver12.2.1.2. Use of another serial port12.2.1.3. Selecting communication port12.2.1.4. Communication port configuration12.2.2. Connection with USB cable
12.2.2.1. USB Telium driver Installation12.3. With Windows XP Professional12.3.1. Connection with serial interface
12.3.1.1. Installing the null modem driver12.3.1.2. Use of another serial port12.3.1.3. Selecting communication port12.3.1.4. Communication port configuration12.3.2. Connection with USB cable
12.3.2.1. Telium USB driver Installation12.4. With Windows Vista Professional12.4.1. Connection with serial interface
12.4.1.1. Installing the null modem driver12.4.1.2. Use of another serial port12.4.1.3. Selecting communication port12.4.1.4. Communication port configuration12.4.2. Connection with USB cable
12.4.2.1. Telium USB driver Installation12.5. With Windows Seven Professional12.5.1. Connection with serial interface
12.5.1.1. Installing the null modem driver12.5.1.2. Use of another serial port12.5.1.3. Selecting communication port12.5.1.4. Communication port configuration12.5.2. Connection with USB cable
12.5.2.1. Telium USB driver InstallationSignets WorddebutOLE_LINK1OLE_LINK2