Logic4training PRICE LIST 0...This package includes training and Initial Assessment on Core Gas Safety plus the following appliances (central heating boilers/cookers/gas fires/water

DOMESTIC NATURAL GAS SAFETY ASSESSMENTS

PRICE LIST

This package includes training and Re-Assessment on Core Gas Safety plus thefollowing appliances (central heating boilers/cookers/gas fires/water heaters).Combustion performance analysis is now included within the CCN1 assessment.Candidates may only undertake Re-Assessment on modules in which they havepreviously been certificated under the ACS scheme. Price includes certification feeand on-line refresher training via Clublogic.

CCN1CKR1HTR1

CENWAT

Please call 0345 845 7222 for further details.All prices are subject to VAT at the current rate.

1st OCTOBER 2019

*Logic4training can provide assistance in building the on-site portfolio, call our team for more information.

CCN1£405.002 DAYS2 DAYS

£220.00

WHERE TRAINING MATTERSLogic4training

CCN1CKR1HTR1

CENWAT

This package includes training and Initial Assessment on Core Gas Safety plus thefollowing appliances (central heating boilers/cookers/gas fires/water heaters).Combustion performance analysis is now included within the CCN1 assessment. Thiscourse is for those candidates who are undertaking ACS for the 1st time and havecompleted the programme below. Price includes certification fee and on-linerefresher training via Clublogic.

OPEN NOW IN SITTINGBOURNE, KENTNEW L4T CENTRE

CODES 5 DAY CCN1 & APPLIANCES INITIAL ASSESSMENT PACKAGE COST

CODE CORE GAS SAFETY COURSE DESCRIPTION TRAINING ASSESSMENT

A full core assessment intended for operatives who carryout installation & maintenance work on pipework,appliances and equipment on domesticnatural gas. This is a prerequisite to all of the appliance assessments.

RE-ASS. 4 DAY CCN1 & APPLIANCES RE-ASSESSMENT PACKAGE COSTCODES

COURSE COURSE DESCRIPTION DURATION COST

APPLIANCES TRAINING ASSESSMENT

APPLIANCES TRAINING ASSESSMENTCentral heating boilers/hot water heaters CookersSpace heaters (including gas fires and wall heaters)Warm air heating appliancesMetersTumble dryersCommissioning of NG Domestic Medium Pressure Meter RegulatorsDomestic Gas Fired Leisure Equipment

CO/CO² Atmosphere&Appliance Testing incl. Training,Assessment &Cert fee 2DAYS £495.00

£65.00per

appliance

CENWATCKR1HTR1DAH1MET1LAU1REGT1

CMDDA1

APPLIANCES SEPARATE APPLIANCE ASSESSMENT TRAINING ASSESSMENT

£4,750.008

WEEKS

4WEEKS

£3,300.00

This is for candidates who have experience and skills gained in a relatedindustry i.e. as a plumber or kitchen fitter or AC engineer (+2 years) and/ora recognised qualification. This package includes the gas trainingprogramme during which you will cover all the key gas safety areasincluding pipework, combustion, chimneys, controls, testing & purging,unsafe situations and ventilation, plus other related courses andH&S modules. On completion of the training programme you will need tobuild your on-site gas work portfolio*. Once this is complete you will returnto undertake your ACS refresher training and assessment for CCN1 andCENWAT only. Package price includes training, ACS assessments,certification fees and training manual.

On this course you will learn all the basic skills and knowledge to be adomestic gas heating installer including health & safety, principles andtheory, pipework skills, hot and cold water systems, energy efficiency, basicgas safety and controls, basic electrics, various H&S modules. You will thenmove on to do the experienced trades route below, which is included in thispackage price. Package price includes training, ACS assessments forCCN1 and CENWAT only, certification fees and training manual.

ExperiencedTrades

Course –Special

PackageOffer

NewEntrantsCourse –Special

PackageOffer

£125.00each INITIAL

£85.00each

RE-ASSESS.ExcludesCert fee

£795.00

£995.00

DOMESTIC GAS HEATING INSTALLER NEW ENTRANTS & EXPERIENCED TRADES COURSE

Building on the established Approved Prior Learning Programme (APL) for those with related trades experience Logic4training nowoffers 2 routes; for those with little or no experience there is the New Entrants Route, or for those with experience and skills gained inrelated trades and/or a recognised qualification there is our Experienced Trades Route. We run open days and introduction sessionsfor each course, these are free of charge, go to logic4training.co.uk website to book your place. Prices include training manuals,online learning and certification fees. Interest free credit available, more information can be found on our website.

LOW COSTFINANCE

AVAILABLE

0%APR

representative

LEI1

CMA1 & CMA3 core meter installer available on request, contact the office.

LPG SAFETY ASSESSMENTS

ASSESSMENT CODE COURSE DESCRIPTION TRAINING ASSESSMENT

Changeover domestic natural gas to LPG for thoseholding a current CCN1 certificate or a COCN1 certificate.This course includes CCLP1 PD; installation servicing, andrepair of domestic appliances in permanent dwellings.

CONGLP1(Including CONGLP1

PD PermanentDwellings)

1 DAY

£175.00£85.00

1 DAY

CONGLP1 LAV - Leisure Accommodation Vehicles

CONGLP1 B - Boats and Yachts

HTRLP2 - Closed flue gas fires, LPG

CONGLP1 RPH - Residential Park Homes

£65.00for each

category or

£235.00for all four

1 DAY

LPG CATEGORY PACKAGE DURATION COST

.

EMERGENCY SERVICE PROVIDER GAS SAFETY ASSESSMENTSASSESSMENT CODE COURSE DESCRIPTION TRAINING ASSESSMENT

CODNESP1

CMA2LSand

MET3LS

½ DAY

£150.00£85.00

Duration – 3 DAYS

Cost – £510.00

1 DAYChangeover from Domestic Gas to Emergency ServicesProvider for gas installers dealing with gas emergenciesdownstream of the emergency control valve.Candidates must already hold CCN1.

This limited scope package combines CMA2 LS and MET3LS, allowing installers to cover everything they need toinstall and commission primary domestic gas meters up to6m³/hr capacity that are sealed off at the meter outletfitting. Price includes certification fee.

This package includes training andassessment for the listed category types.To undertake categories separatelyas a top up the candidate musthold a valid LCL Awards CONGLP1certificate otherwise the full coreassessment will need to be taken.

VESLP1* – Storage vessels, single supply up to 32mm

£395.002 DAYS

LPG VESSELS PACKAGE DURATION COST

.This package is for those operativeswho wish to install Bulk Storage LPGtanks and install the associated PEpipework. This is a package andincludes training, assessment andcertification fee.

VESLP2* – Storage vessels, multiplesupply up to 63mm

EFJLP1 – PE Electro-fusion jointing ofLPG supply pipework

* Candidate must hold a valid Core (CCLP1) or changeover (CONGLP1) certificate toundertake this package.

NEW Logic4training Centre opens in Sittingbourne, KentSEE PAGE 15 FOR MORE DETAILS

2

All the above ACS courses (except packages) are subject to a certification fee.

CONTINUED OVERLEAF

COMMERCIAL NATURAL GAS SAFETY ASSESSMENTS

CODNCO1ICPN1 TPCP1A

CIGA1CORT1 CDGA1

£1,275.00

ASSESSMENT CODES 8 DAY CORE COMMERCIAL HEATING GAS SAFETY PACKAGE COST

£1,595.00

COCN1ICPN1 TPCP1A

CIGA1CORT1 CDGA1

CORE

Commercial Heating Core natural gas safetyassessment. This or a CODNCO1 is a prerequisiteto all of the appliance assessments.

Changeover domestic natural gas to commercialheating natural gas for those holding a current coredomestic gas safety (CCN1).

£350.00£255.003 DAYS

£170.00

2 DAYS

2 DAYS

£210.00

1 DAY

COCN1 *

CODNCO1


This package includes training and assessment on commercial heatingcore gas safety, installation first fix of commercial pipework andappliances, commission, service, repair and breakdown of 3commercial appliances and tightness testing and direct purging ofinstallation pipework. The package is intended for those with relevantexperience of the subjects covered. Price includes certification fee.

ASSESSMENT CODES 6 DAY COMMERCIAL HEATING CHANGEOVER PACKAGE COST

* COCN1 PILS limited scope core commercial available on request, contact the office.

This package includes training and assessment on changeoverdomestic to commercial heating core gas safety, installation first fix ofcommercial pipework and appliances, commission, service, repair andbreakdown of 3 commercial appliances and tightness testing anddirect purging of installation pipework. The package is intended forthose with relevant experience of the subjects covered, those withlimited or no experience should take the Upskill package. CCN1 is apre-requisite qualification for this course. Price includes certification fee.

Installation first fix of pipework in excess of 35mm fornatural gas and LPG.

T ightness testing & direct purging of installationpipework not exceeding 1m3 in volume, 40 mbarpressure and 150mm diameter natural gas only.

Tightness testing & purging of installation pipeworkexceeding 1m3 in volume, up to 16 bar operatingpressure (natural gas)& 2 bar operating pressure for LPGu

£150.00

£85.00 £150.00

TPCP1

£75.001/2 DAY

1 DAY

1/2 DAY

1/2 DAY

£170.00

2 DAYS

£210.00

1 DAY

ICPN1 *

TPCP1A


PIPEWORK

* ICPN1LS limited scope commercial pipework installer available on request, contact the office.

u Subject to the candidate holding the relevant natural gas or LPG core certificate.

All the prices quoted are subject to VAT. Prices are current at the time of publication but may be subject to change. Training is not anessential prerequisite to ACS assessment. If candidates fail to achieve the required level of competency in either the practical ortheory assessment, it may be necessary for them to complete a re-sit. If this situation arises an additional cost may be incurred.Logic4training is a LCL Awards approved ACS assessment centre.

3

u Subject to the candidate holding the relevant natural gas or LPG core certificate.

8 DAY DOMESTIC TO COMMERCIAL HEATING UP-SKILL PACKAGE COST

£1,275.00

COMMERCIAL NATURAL GAS SAFETY ASSESSMENTS continued

An in depth course for operatives who already hold domestic CCN1 but have limited experience on commercial appliances and require detailed knowledge on the differentappliance types, flues, controls and systems that can be commonly found in the field. Thecandidate will also undertake the required training and assessment on CODNCO1 (changeover commercial heating gas safety), ICPN1 (installation first fix of pipework in excess of 35mm),CIGA1 (commission, service, repair and breakdown of indirect fired commercial appliances) andCORT1 (commission, service, repair & breakdown of overhead radiant tube heaters & radiantplaque heaters).The course price includes the certification fee. Further modules can be taken as required.

All the above ACS courses (except packages) are subject to a certification fee.

CIGA1

CORT1

CDGA1 £150.00per

appliance

£75.00per

appliance


BMP1

Commission, service, repair and breakdown of indirectfired natural gas and LPGu commercial appliances.

Commission, service, repair & breakdown of natural gasand LPGu overhead radiant tube & plaque heaters.

Commission, service, repair and breakdown of directfired natural gas commercial appliances.

Commercial gas boosters – medium pressure.

Install, exchange, remove and commission Diaphragm type meters. Must hold core commercial or CMA1.

Polyethylene electro fusion jointing for Natural Gasand single/multiple LPG gas supplies.

Commercial gas fuelled engines. This can be carriedout on site. A guide and questionnaire can be sent tocustomers who require this assessment.

£1,795.00Duration2 weeks

MANAGED LEARNING PROGRAMME FOR NEW ENTRANTS, COMMERCIAL HEATING COST

This is an in-depth training programme covering all aspects of commercial heating gas safetyas required by the ACS scheme, and it is recognised under the ACS Scheme as a managedlearning programme. The course is intended for experienced operatives with sufficientcommercial heating experience. Following successful completion of the programme, and thenecessary work portfolio (if required), candidates will be ready to undertake the 6 DayCommercial Heating Assessment ACS Package as shown in the commercial gas courses section,for Commercial Core Gas Safety (COCN1), Pipework Installation (ICPN1) and Indirect FiredBoilers (CIGA1) at a cost of £995.00 + vat.Acceptance on to this course is subject to an interview and proof of experience in order tomeet the ACS entry requirements. The format and content of the work portfolio is covered duringthe interview and induction. Training manual and the certification fee are included in the cost.

MET4

EFJLP1

On-siteP.O.A.

On-siteP.O.A.

CGFE1

APPLIANCES

From 1st October 2018 revised entry criteria was brought in for those undertakingACS for the first time or for those wishing to extend their scope within ACS

and add additional appliances or sectors i.e. LPG, commercial heating or catering.This requires operatives to undertake a training programme for each additional area

or appliance and demonstrate registration with Gas Safe Register.

Please speak to our customer service staff for more details.

4

ACS Changeover from Domestic to Commercial CateringPackage CODC1, including COCATA1 changeoverdomestic to catering appliances (equivalent toCOMCAT 1+3). To undertake this package, operativesmust hold a current CCN1 and domestic appliancesCENWAT and CKR1. Price includes the certification fee.

ACS Commercial Catering Core Package CCCN1,including COMCAT1 (Boiler burners, open/solid topranges, hotplate, bain maries) and COMCAT3 (Deepfat and pressure fryers, griddle, grills). Price includes the certification fee.

NEW ACS Changeover package to Commercial LAUNDRYincluding changeover core and commercial laundryappliance. To undertake this package operatives musthold a commercial core or changeover assessment. Price includes the certification fee.

CCCN1*COMCAT1COMCAT3

£595.004 DAYS

5 DAYS

CODC1*COCATA1

ACS CODES PACKAGE DESCRIPTION DURATION COST

£895.00

CoCCLNG1CLE1 1 DAY £350.00

COMMERCIAL CATERING & LAUNDRY GAS ASSESSMENTS

INDIVIDUAL ASSESSMENTS

PACKAGES

*COMCAT5 can be added to the package price for only £85.00+VAT.

s Individual elements do not include the certification fee.

ACS CODE COURSE DESCRIPTION DURATION/£ DURATION/£ TRAININGs ASSESSMENTs

1 DAY£85.00

1 DAY£210.00

2 DAYS£170.00

2 DAYS£350.00

1/2 DAY

£75.00

1/2 DAY

£150.00

£75.00 £150.00£75.00 £150.00

CODC1

CCCN1

COCATA1

COMCAT1

COMCAT3

£150.00£75.00Non-domestic catering appliances with forced draught gasburnersCOMCAT5

£150.00£75.00Commercial Mobile Catering (must also hold LPGchangeover)CMC1

Changeover from Domestic to Commercial Catering(must hold CCN1)

Commercial Catering Core Natural Gas

Changeover from domestic to catering appliances(equivalent to COMCAT 1+3) (must hold CCN1 plus adomestic appliance i.e. CENWAT or CKR1)

Boiler burners, open/solid top ranges, hotplate, bain maries

Deep fat and pressure fryers, griddles, grills

£1,795.00Duration2 weeks

MANAGED LEARNING PROGRAMME FOR NEW ENTRANTS, COMMERCIAL CATERING COST

This is an in-depth training programme covering all aspects of commercial catering gas safetyas required by the ACS scheme, and it is recognised under the ACS scheme as a managedlearning programme. The course is intended for experienced operatives with sufficientcommercial catering experience. Following successful completion of the programme, and thenecessary work portfolio (if required), candidates will be ready to undertake the 5 DayCommercial Catering Assessment ACS Package as shown in the commercial catering gascourses section for Catering Core Gas Safety (CCCN1), Gas Ranges (COMCAT1) and Gas Fryers(COMCAT3) at a cost of £830.00 + vat.Acceptance on to this course is subject to an interview and proof of experience in order to meetthe ACS entry requirements. The format and content of the work portfolio is covered during theinterview and induction. Training manual and the certification fee are included in the cost.

5

OFTEC OIL

The OFT10 courses are for category 1 & 2 candidates only and proof must be provided. OFTECTraining manuals are available to be purchase directly from the centre at a cost of £180.00 for the set(books 1,2,3,4), or £45.00 each.

£695.004 DAYS

2½ DAYS £295.00

1 DAY £225.00

1 DAY £225.00

OFTEC Trainingand AssessmentPackage OFT10101, 105E, 600A

OFT10–101

OFT10 –105E

OFT10–600A

COURSE TITLE COURSE DESCRIPTION DURATION COST

This package includes training and assessment on the3 main OFTEC elements OFT10 101, OFT 10 105Eand OFT10 600A as detailed below. Price includesthe cert i f ication fee. (OFTEC scheme rules andentry requirements apply).

Domestic/Light Commercial Pressure Jet ApplianceCommissioning & Servicing – this includes for training andassessment. Cost includes for certification fee.

Domestic Oil Firing Installation and Energy ConservationMeasures in Buildings. Cost includes for certification fee,(training ½ day, and assessment ½ day).

Domestic and Non-domestic Oil Storage Tanks andSupply Pipework Installation. Cost includes forcertification fee, (training ½ day, and assessment ½ day).

£795.005 DAYS

OFTEC Oil FiringIntroductory

Training Course(OFT50)

This course is for new entrants to the oil fired heatingindustry. The course is accepted as an entry qualificationfor those wishing to move on to the three main OFTECassessments. The OFT50 Oil Firing Introductory coursesatisfies OFTEC’s category 2 and 3 candidate entryrequirements. A set of OFTEC training manuals will beprovided during the course; candidates may keep thesefor future use. There is no formal assessment at the end ofthe Oil Firing Introductory Course, but upon successfulcompletion candidates will be able to undertake theOFTEC Assessments OFT10-101/105E/600A.

RENEWABLE ENERGY COURSES + F-GAS REFRIGERATION HANDLING


4 DAYS

ASHPonly

3 DAYS

£595.00

ASHPonly

£495.00

This regulated RQF qualification is for those wishing to achievea nationally recognised qualification in the installation andmaintenance of Heat Pumps Systems (Non-refrigerant Circuits).This qualification is based upon the National OccupationalStandard (NOS) and is recognised by the MCS registrationbodies as an acceptable qualification to join the scheme.Candidates will need to meet minimum qualification andexperience requirements and in addition must hold theWRAS Water Regulations qualification and Energy Efficiency forDomestic Heating.Price includes course manual and certification fee.

LCL AwardsLevel 3 RQF

Award in theInstallation andMaintenance of

Heat PumpsSystems

(Non-refrigerantCircuits)

This qualification is for experienced operatives working withinthe refrigeration and air-conditioning industry who need tomeet the legal requirements for working with Fluorinated Gases,otherwise known as F-Gases and other Ozone DepletingSubstances. The course also covers brazing of pipework. Thispackage is for those wishing to be covered for all fourcategories including leak checking, refrigerant recovery,service/maintenance, and installation The price includes for thepractical & theory training, examination fees & F-Gas trainingmanual.

As above but for those without experience in the refrigeration orAC industry. Candidates will cover all the fundamental principlesand core skills prior to undertaking the above course, includingprinciples, components & controls, regulations, pipework,charging and recovery.


Award in F-Gas:Install, Service,

Maintain,Recovery,

Decommissionand LeakageChecking of

Systems(Category I)

£895.00

£395.00

5 DAYS

3 DAYS(additional)

6

HEATING AND WATER RELATED COURSES

1DAY(INITIALor RE-

ASSESS.)

£195.00

HWSS Hot WaterSystems and

Safety(incorporatingUnvented HWS)

This course is for experienced plumbing and heating operativeswho require a qualification in the installation, servicing andmaintenance of all domestic hot water systems including therequirements for the installation of Unvented Hot Water Systems ascovered by Part G. The course is recognised by those CompetentPerson Schemes (CPS) approved to offer a self certificationscheme under Part G. The price includes training, assessment,certification fee and course manual.

1 DAY £195.00

WaterRegulations

AdvisoryScheme(WRAS)

Certificate

This course covers the Water Regulations 1999. The course doesnot require the candidate to undertake prior learning as all therequirements will be covered during the course. Upon receiving the certificate of competence from LogicCertification, the successful candidates can apply for approvalstatus with one of the Water Industry Approved Plumber Schemesoperating in England & Wales, provided he or she has a recognisedplumbing qualification and sufficient public liability insurance.The cost of the course includes all training material, assessmentand certification fee. This course is certified by LCL Awards and isWRAS approved.

1 DAY £195.00

LegionellaPreventionand WaterTreatment

(Operative orManagement

Course)

This course is designed to enable installers or managers to under-stand the requirements of the ACoP Guidance Document L8, HSEGuidance, British Standards and Water Regulations. The course isfor installers carrying out installation & maintenance of hot & coldwater supply systems or for managers who are responsible formanaging the properties. On completion of the course the installerwill be able to undertake risk assessment and carry out disinfectionusing a range of methods. For the managers they will be familiarwith the risk assessment process and outcomes. The cost of thecourse includes all training material, assessment and certificationfees. Installers must hold a valid WRAS Water Regulations certificate.


1 DAY

LCL AwardsL3 RQF Award

in EnergyEfficiency

for Gas Fired &Oil Fired

DomesticHeating & HotWater Systems

Basic HeatingSystem & Boiler

Fault FindingCourse

The LCL Awards L3 RQF Qualification Energy Efficiency for Gas Firedand Oil Fired Domestic Heating and Hot Water Systems is for theprofessional heating engineer installing heating & hot watersystems in domestic properties. This course will prepare you for self-certification and covers Part L1A of the Building Regulations, theDomestic Building Services Compliance Guide, the NEW Boiler Plusrequirements and CE54. The certificate will demonstrate yourcompetence and is recognised by Gas Safe Register, Micro-generation Certification Scheme & Competent Persons Scheme.Price includes training, assessment and certification fee.

£195.00

2 DAYS £245.00

This course covers the basic required knowledge gas installers needto know to safely test for faults on central heating systems andboilers. Fault finding training will equip candidates with theknowledge to identify a fault based on a boiler start-up sequence,understand and use manufacturers’ flow charts and wiringdiagrams, plus use multimeters to test circuits, components andearth continuity, focusing on electrical safe isolation and safeworking practices.

For further information contact our Customer Service Team on:0345 845 7222 or log on at: www.logic4training.co.uk

All the prices quoted are subject to VAT. Prices are current at the time of publication but may be subject to change. If candidatesfail to achieve the required level of competency in either the practical or theory assessment, it may be necessary for them tocomplete a re-sit. If this situation arises an additional cost may be incurred. Logic4training is a LCL Awards approved ACS assessmentcentre.


7

ELECTRICAL COURSES

CODE COURSE DESCRIPTION DURATION COST

City&Guilds2382-18 Level 3

RQF Award in theRequirementsfor ElectricalInstallations

BS7671:18th Edition Wiring

Regulations

FULLCourse£455.00

UP-GRADECourse£195.00

FULLCourse3 DAYS

UP-GRADECourse1 DAY

This course is for electricians and those requiring a workingknowledge of BS7671:2018 18th Edition Wiring Regulations.Assessment is by multiple choice examination and is openbook. Price includes registration and examination fees.Guidance documents are provided for use during the course.Candidates should have their own copy of the 18th EditionWiring Regulations: these can be purchased fromLogic4training prior to attending the course.The Upgrade course option is for those who hold a currentqualification certificate based up 17th Edition WiringRegulations Amendment 3 BS7671:2008 (2015). The course onlycovers the changes to the 18th Edition and the examination willcover ALL sections within the wiring regulations.

£595.004 DAYS

LCL AwardsLevel 3 RQF Award

in the InitialVerification andCertification of

ElectricalInstallations

This qualification is for experienced electricians who areresponsible for the INITIAL VERIFICATION, testing and certificationof electrical installations to BS7671: and in particular therequirements within Guidance Note 3. The course will cover thetesting required to complete Electrical Installation and MinorWorks certificates including Polarity, Insulation Resistance, EarthLoop Impedance and RCD testing in both practical and theorytraining session. It is recommended that candidates hold the17th or 18th Edition Wiring Regulations qualification.Assessment is by practical task, multiple choice and a writtenexam which is open book. Price includes registration andexamination fees.

£455.003 DAYS

LCL AwardsLevel 3 RQF Award

in the PeriodicInspection,

Testing, ConditionReporting andCertification of

ElectricalInstallations

This qualification is for experienced electricians who areresponsible for PERIODIC INSPECTION, testing and certificationof electrical installations to BS7671: and in particular GuidanceNote 3. The course will cover the requirements and methods forcarrying out periodic inspections and completing electricalinstallation condition reports in both practical and theorytraining sessions.It is ESSENTIAL that candidates are fully conversant with testingand inspection as detailed in the Initial Verification qualification,as this will not be covered. If the candidate has not gainedthe necessary experience then it would be advisable to attendthe Initial Verification course first. It is recommended thatcandidates hold the 17th or 18th Edition Wiring Regulationsqualification.Assessment is by practical task, multiple choice and a writtenexam which is open book. Price includes registration andexamination fees.

£295.002 DAYS

City&Guilds 2377Level 3

RQF AwardIn-serviceInspection& Testing

of ElectricalEquipment

(PAT Testing)

This course is for electrical operatives wishing to carry outPortable Appliance Testing (PAT) of In-service ElectricalEquipment. The PAT testing training course covers the practicaltesting of various appliances, and the regulatory and legalrequirements that underpin the inspection and testing asdetailed in the IET Code of Practice for the In-ServiceInspection and Testing of Electrical Equipment (4th Edition).Candidates must own a copy and be familiar with its contents.It is advised to purchase a copy ahead of the course.Assessment by multiple choice examination and a practicalassignment within the centre and is open book. Price includesregistration and examination fees.

CONTINUED OVERLEAF

8

ELECTRICAL COURSES continued

CODE COURSE DESCRIPTION DURATION COST

NEW ENTRANTS DOMESTIC ELECTRICAL INSTALLER COURSE

22 DAY NEW ENTRANT DOMESTIC ELECTRICAL INSTALLER COURSE COST

This course is a 22 day (4 week) intensive practical training programme for those wishing to startwork in the electrical trade and are looking to become registered with a competent personscheme (CPS) as a Domestic Electrical Installer (previous experience required). The course is forthose with little or no electrical knowledge but who are adept at practical and manual tasks andhave basic numeracy skills. Training will provide the knowledge and practical skills to be able toinstall electrical installations within domestic dwellings and, most importantly, to be able to install,inspect, test and certificate work to BS 7671 Wiring Regulations and Part P. As part of the course youwill gain the Domestic Electrical Installer, C&G 18th Edition Wiring Regulations and RQF L3 InitialVerification and Testing of Electrical Installations qualifications listed in this price list, plusessential H&S certificates relevant to the role. Practical training will cover all the skills to carry outa full domestic electrical installation, including power, lighting, showers, ELV lighting, cookers andoutside circuits.The cost will include for all examination and certification fees plus a comprehensive training manual, the IEE Electricians guide to the Building Regulations and IEE Guidance Note 3.

The course also includes the supply of a copy of the BS 7671:2018 18th Edition Wiring Regulations.

£2,750.00

LCL AwardsDomesticElectricalInstallerCourse

(Full Scope)– Part P

The course is for any experienced operative involved in theinstallation of domestic electrical systems whether part or fullinstallation. The course and assessment is based upon the2013 Part P document and BS 7671 Wiring Regulations. Thispractical based course covers installation, inspection, testingand certification on domestic electrical installation as part ofthe following subject areas.

• Legislation & Standards• Definitions and Basic Principles• Design Specification & Cable Installation• Special locations• Mains Position• Earthing & Bonding• Safety Devices• Safe Isolation and Working Practice• Power & Lighting Circuits• Inspection, Testing and Certification

5 DAYS £8 45.00

Assessment is by practical task, multiple choice and a writtenexam which is open book. The price includes supply of theElectricians Guide to the Building Regulations & Certification fee.

City&Guilds2919-01 Level 3RQF Award in

Domestic,Commercial andIndustrial ElectricVehicle Charging

EquipmentInstallation

£345.002 DAYS

This course is for experienced electrical installation operativesand covers all the key skills to install, fault find and inspect andtest domestic and commercial electric vehicle charging points.Candidates should have a sound practical knowledge of thewiring regulations and testing & inspection. The course is basedupon the IET Code of Practice for the installation of EV chargepoint installations and a copy of this book is included in thecourse plus all associated examination fees.

£160.00½ DAYSafe Isolationof ElectricalInstallations

This course is to ensure learners are fully aware of and able toput in to practice the industry Safe Working Procedure for theIsolation of Electrical Supplies (single and multi-phase). Thecourse is underpinned by the requirements laid down in theElectricity at Work Regulations and BS7671.

9

AM2 ELECTROTECHNICAL ASSESSMENT

For further information contact our Customer Service Team on:0345 845 7222 or log on at: www.logic4training.co.uk

STOP PRESSTo keep up to date, register for our e-Newsletter and receive

the latest updates on new centres, offers and industry news.

The Achievement Measurement 2 (AM2) is the Electro-technicalIndustry standard assessment for electrical competence andforms an essential part of the Electrical Advanced Apprenticeship.This assessment takes place only at the Luton centre which is anapproved centre under the NET network and consists of practicalinstallation, inspection & testing and fault finding assessment plusan online theory assessment. A self assessment checklist isrequired to be completed before the assessment can be under-taken. The price includes the certification fee.

Achievement Measurement 2

(AM2)Electrotechnical

Assessment

£685.003 DAYS

COURSE COURSE DESCRIPTION DURATION COST

This optional refresher training can be undertaken by candidatesprior to undertaking the AM2 assessment detailed above. Duringthe revision course we will cover aspects of installation, inspection,testing, certification and fault finding including SWA, SY, motorsand FP. There is no certificate issued and candidates should havecompleted the AM2 self assessment checklist before booking onto this refresher course.

AM2 Revision 2 DAYS £210.00

The Advanced Assessment of Competence (AAC) wasdeveloped by NET and the Joint Industry Board (JIB) to provide amechanism for qualified Electricians to achieve ApprovedElectrician status and the corresponding JIB grading. It has 6sections to be assessed, Risk Assessment and Safe WorkingPractice - Safe Isolation of Supply - Initial Inspection, Testing andVerification - Periodic Inspection and Testing - Fault Diagnosis andRectification - Supervision of Electrical Operatives in the workplace - Underpinning Knowledge.Experienced and qualified operatives only may complete thisassessment and must complete the AAC self-assessment formprior to attending the course.

1 DAY £360.00

AdvancedAssessment of Competence

(AAC) forQualified

Electricians

Each of the 4 areas of the AM2 assessment can be undertaken asa retest if required, more information can be obtained by callingthe Customer Services Team on 0345 845 7222.

AM2 RetestCall formore

details

Call formore

details

10

SAFETY MANAGEMENT COURSES

This course is for those qualified gas operatives involved in therepositioning, altering or extending of the Protective EquipotentialBinding Conductor when exchanging or altering the position ofgas meters within dwellings. Candidates must possess as aminimum a valid CCN1, CMA1, CESP1 or CCLP1 (PD) orequivalent and MET1. A knowledge of basic electrical principleswould be an advantage but not essential. Cost includes training,assessment and certification fee.

½ DAY £125.00

This course provides an overview of electrical safety necessary forthose managers, duty holders and supervisors who have aresponsibility to meet the Health and Safety Executives (HSE)Electricity at Work Regulations (HSR25).During the course candidates will cover the following areas withregards to safe working practices and electrical safety: uBasicelectrical principals including system types, safety devicesand bonding,uElectricity at Work Regulations,u BS7671 WiringRegulations, uBuilding Regulation Part P, uSafe Isolation,uNotification to Building Control, u Inspection, testing &certification of work, uPAT Testing. Upon successful completion ofthe course candidates will be issued a certificate by Logic4training.

1 DAY £150.00

ElectricalSafety

Awarenessand

Management

ProtectiveEquipotential

Bonding(PEB1)


Award inAuditing ofGas Work

This regulated RQF qualification is for those learners workingwithin either the Social Housing sector or Residential Letting orManagement sector and who need to be aware of gas safetymatters affecting their tenants and residents in domestic dwellings.These could be housing maintenance staff, RLOs, call centrestaff and letting agents working for local authority’s, housingassociations or private Letting or Management agents. The coursewill cover gas safety, carbon monoxide, landlord’s duties andresponsibilities, regulations and other areas relating to the subject.Assessment is by a short written exam and the cost includes allregistration and examination fees.

1 DAY £195.00


Award in GasSafety

Awarenessin Social orResidential

Housing

This course is to assist employers, employees and sub contractorsinvolved with the work of installing cavity wall and loft insulationor external wall cladding who need to comply with therequirements of the Health & Safety at Work act and Gas Safety(Installation & Use) Regulations. The course will provide operativeswith the skills and knowledge required to identify and minimise therisks associated with the installation of cavity wall and loft insulationin domestic premises where gas, oil and/or solid fuel appliancesare fitted. The course is certified by LCL Awards under the ACoPand the cost includes all certification fees.

1 DAY £195.00

Cavity Wall& Loft

InsulationInstaller –

Gas SafetyAwareness

Course

COURSE TITLE COURSE DESCRIPTION DURATION COSTC

This course is for candidates responsible for undertaking auditingof gas work within or for a business. It covers how to plan, carryout, record and follow up on a gas audit in a safe and consistentmanner. Candidates must hold a current and valid certificate ofgas safety competence for the range and type of gas appliancesand installations to be audited.

3 DAYSPlus

HomeStudy

£695.00


11

HEALTH & SAFETY – ONLINE COURSES

Logic4training offer a number of Online Health & Safety courses as detailed below. These areavailable for individuals, group or corporate bookings and can be delivered at a time to suit you.

ManualHandling

Basic FireSafety

Awareness

Fire Marshal

FireExtinguisher

£35.00

£35.00

£35.00

£25.00

£35.00

£25.00

£65.00

This is a Category A course on asbestos awareness. As well as informing youabout the risks of working with asbestos, the course will deliver a lot moreinformation about: recognising asbestos, where it is used, minimising therisks and the legislation about working with asbestos.

This course is aimed at anyone who undertakes work at height, or whoemploys people who regularly work at height. This course covers topicsincluding the dangers of working at height, the regulations, the hierarchy ofcontrols, assessing risk and much more.

Manual handling covers a wide range of activities and incorrect manualhandling is one of the most common causes of injury at work. The nature ofthe load itself doesn't matter, if you have to use your muscles then it'smanual handling and you are potentially in danger. This course covers thelegislation and practices you need to be safe.

This course explains, why fires occur and what actions you must take tohelp prevent them starting and the actions you must take when theydo. By completing this course you will be making your workplace a saferenvironment.

The main outcome of this training course is to provide you with theknowledge to carry out the functions of a fire marshal. Please note, this coursealso contains all of the content in the Basic Fire Awareness and FireExtinguisher courses.

In this course you will learn how to identify the different types of fireextinguishers that might be installed within your workplace and whatsituations they might be used in. At the end of the final module you willbe presented with a simulation that will test what you've learnt.

This training course is aimed at all employers and staff to assist them inidentifying the danger that Legionella poses, as well as covering ways toidentify & assess sources of risk from Legionella in the premises and implement& manage a control programme.

COURSE TITLE COURSE DESCRIPTION COST

AsbestosAwareness –

IATP

ONLINE COURSE FEATURES:l Fully Online interactive training package that is engaging and informative for

the learnerl Based on current industry standards and codes of practicel All courses have an end test and upon successful completion a certificate of

achievement will be generated for the learner l Duration between 1 to 4 hours (varies for different courses)l Cost effective with taster option so you can “try before you buy”l Can be taken at anytime and anywhere, to suit the learnerl Desktop and tablet friendly – flexible delivery option to suit youl Multiple licences can be purchased to allow larger organisations to roll the

courses out to multiple employees with each being given their own login. This can be monitored and administered by the organisation to ensure compliance and participation

l Pay via PayPal or through normal methods by contacting the Logic4training customer service team

l Meets company obligations to ensure safe working practices amongst its staff and contractors and can be used as CPD.

Working atHeights(WAH)

LegionellaAwareness

12

Logic4training is able to offer Personal finance throughour partner arrangement with Deko

This is a great way to spread the cost of training over a timeframe to suityou, at a competitive rate or even Interest Free, plus you can repaysome or all of your loan at any time without any early repayment charge.

For more information call ourCustomer Service Team on 0345 845 7222

RepresentativeExamples

Example 1Purchase Price: £3,300.00Deposit: £330Amount of Credit: £2,970.0012 Monthly Payments: £274.50Total Repayable: £2,970.00Duration: 12 monthsRate of Interest (fixed): 0%0% APR Representative

Example 2Purchase Price: £5,700.00Deposit: £750Amount of Credit: £5,130.0012 Monthly Payments: £427.50Total Repayable: £5,130.00Duration: 12 monthsRate of Interest (fixed): 0%0% APR Representative

Example 3Purchase Price: £5,700.00Deposit: £570.00Amount of Credit: £5,130.0024 Monthly Payments: £235.49Total Repayable: £5,651.86Duration: 24 monthsRate of Interest (fixed): 9.9%9.9% APR Representative

Example 4Purchase Price: £954Deposit: £95.40Amount of Credit: £858.6024 Monthly Payments: £39.41Total Repayable: £945.81Duration: 24 monthsRate of Interest (fixed): 9.9%9.9% APR Representative

• 12 Months Interest Free Credit at 0% APR representative • 24 Months Low Rate Credit at 9.9% APR representative

Available Personal Finance Options

Personal Finance Questionsl Personal Finance is available over 12 or 24 months and is

subject to age and status.l If your application is declined you will have the option of

choosing an alternative method of payment.l A deposit is required

l Save time before applying by making sure:l You are 21 or overl You have a UK bank or building society accountl You have been a permanent UK resident for at

least 3 yearsl You have a regular source of incomel Your credit history is good

l You will need to bring in to the centre the followingl Proof of identity l Proof of addressl Bank details l Current Utility Bil

LOW COSTFINANCE

AVAILABLE

0%APR

representative

Company Details

Gas Logic Ltd acts as a credit intermediary and only offers creditproducts through Deko.

Gas Logic Limited is authorised and regulated by the FinancialConduct Authority (number 648975)

Logic4training is a trading name of Gas Logic Ltd. registered inthe UK under Company No.4112853

Deko is a trading name of Pay4Later Ltd who act as a creditintermediary. They are registered in England and Wales(company number 06447333) and authorised and regulated bythe Financial Conduct Authority (register number 728646). Formore information please go to www.dekopay.com/faq or visitwww.dekopay.com. Finance is provided through the Dekoplatform by a number of lenders. You will be offered the bestrate available based on your credit history and our lenders’credit decision policies. You will be informed who the lender is atthe point the loan is offered and provided with their full contactdetails.

13

Are you a registered UK business looking for finance on your courses?Logic4training works with iwoca a leading UK provider of finance solutions tosmall or medium businesses. Flexible solutions are available with up to 90 daysinterest free on your first order. Call us for more details.

Selling testing, inspection and consumableproducts for gas engineers, oil installers

and electricians.From installation, maintenance and safety testing

equipment to Gas Record Pads; Logic4trade has sourcedan extensive range of quality products from the UK’s

most trusted manufacturers.

For the best deals... log on to:

YOUR ON-LINE STORE

GAS

& H

EATI

NGPR

ODUC

TSEL

ECTR

ICAL

PROD

UCTS

OIL

PROD

UCTS

GAS

RECO

RD P

ADS

AND

LABE

LS

LICENCEDBY: Logic4trade is licenced

to sell Gas Safe Registerbranded products,available exclusively toregistered engineers.

FREE DELIVERY ON ALL ORDERS OVER £75

All prices subject to VAT where applicable. Prices correct at time of going to print. E&OE

www.logic4trade.co.uk

Products for Professionals

Just take a look at some of the products we sell...

Domestic, Commercial, LPG, Catering & Gas SafetyAwareness Training Manuals £39.50 – £49.50

14

Logic4training LimitedNORTHOLT CENTRE: Unit 2, 1 Rowdell Road, Northolt, Middlesex UB5 5QR Tel: 020 8845 7222

SITTINGBOURNE CENTRE: 36/37 Church Road Business Centre, Church Road, Eurolink, Sittingbourne,Kent ME10 3RS Tel: 01795 505 991

BASILDON CENTRE: Victoria House, Hemmells, Laindon North, Basildon, Essex SS15 6ED Tel: 01268 413 315

LUTON CENTRE: Unit 2, Sundon Business Park, Dencora Way, Luton, Bedfordshire LU3 3HP Tel: 01582 562 702


To book a course contact our Customer Service Team on: 0345 845 7222For the latest SPECIAL OFFERS visit us at: www.logic4training.co.uk

LOOKING FOR A TRAINING CENTRE?

STOP PRESS To keep up to date, register for our e-Newsletter and receivethe latest updates on new centres, offers and industry news.

Centres located at:

NORTHOLT 020 8845 7222 SITTINGBOURNE 01795 505 991

LUTON 01582 562 702 BASILDON 01268 413 315

NORTHOLT LUTON BASILDON

SITTINGBOURNE

NEW CENTRE

NOW OPEN

15

GL/

PL43

/19

Gas Logic Limited is authorised and regulated by the Financial Conduct AuthorityRegistered in England No.4112853

Logic4training is the trading name of Gas Logic Limited

Logic4training LimitedHead Office

Unit 2, 1 Rowdell Road, Northolt, Middlesex UB5 5QRTel: 0345 845 7222

Fax: 0345 845 7333 Email: [email protected]: www.logic4training.co.uk


NEW Logic4training Centre opens in Sittingbourne, Kent

Documents

Logic4training PRICE LIST 0...This package includes training and Initial Assessment on Core Gas Safety plus the following appliances (central heating boilers/cookers/gas fires/water