Upload
vuongque
View
253
Download
1
Embed Size (px)
Citation preview
LORO-X Parapet direct drainage systems
Technical status: September 2009Subject to technical changes
AKTUELL SERIE 43 ATTIKA DIREKT ENG 1.3
LO
RO
ne
ws 4
3
adhesvie bonding flange
Attikaablaufdirekt an derDachrandaufkantung
LORO offers complete drainage systems for draining roofs and roof terraces with finished roof edges (Parapet): The parapet direct drains of series 43 include the piping, mol-ded parts/fittings and fastening material. The drains of this series can either be used as complete systems with down-and stand pipe or as downspout. In any case, they will be installed on the outside and will com-pletely, silently and safely drain the building without a single pipe inside the building.
The flagships of this series, patented downspouts without downpipe, will even satisfy the requirements of the standards for gravity roof drains with the piping inside the building and have a drainage rate of 4.5 l/sec at a water level of 35 mm.
Advantages: • silentgravitydrainage • drainageperformanceinaccordancewithroof drainage standard DIN EN 1253 up to 4.5 l/sec • nopenetrationofthehorizontalroofsurface • nodrainagepipesinsidethebuilding • drainageoftherainwaterthruadownpipeon the outside or as downspout • adhesivebondingflangeaccordingto DIN EN standard 1253
with gravity drainageparticularly suitable for these types of rooms and buildings: •officesandsuchlike,•livingroomsinapartments,bedroomsinhotels,hostelsetc.,classroomsandsuchlike,•sickroomsinhospitalwardsandbedroomsinsanatoriums,nursinghomesetc.
Main drainage
Gravity drainage
Silent
height of water level 35 mm
2
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Parapet direct drains
Series 43
LORO-X rain water drainage systemsLORO-X Parapetdirect rain water drainage systems of the silent gravity class
01316.070X LX 620
2
01316.100X LX 621
3
01330.070X LX 650
4
01330.100X LX 647
5
01320.100X LX 653
6
01350.100X LX 694
7
Fig. 2 & 3 The drains shown in Fig. 2 & 3 are particularly interesting for areas with a thin heat insulation layer or other solutions, where the installation of the drain in the surface is difficult: Here, the roof surface (heat insulation) will not be penetrated and the drain will achieve a drainage performance of 0.8 l/sec (DN 70) or 1.2 l/sec (DN100), respectively, at a water height of 35 mm. • lowest possible depth of penetration (0 mm)
Fig. 4 & 5 Having a collecting tank and a depth of penetration of approx. 52 mm, the drains shown in Fig. 4 & 5 have considerably higher drainage performances of 2.3 l/sec (DN 70) or 3.0 l/sec (DN100), respectively, at a water height of 35 mm. Please note that the higher capacity of the smaller diameter will be achieved by the gutter’s higher degree of filling. • increased drainage performance
Fig. 6With the drainage performance of 4.5 l/sec conforming to the standardandaminimizeddepthofpenetration(52mm)inaddition to that, the double pipe drain shown in Fig. 6 is suitable for applications, where the roof surface is not to be penetrated deeper. • drainage performance of 4.5 l/sec conforming to standard• low depth of penetration
Fig. 7Only one pipe in connected to the collecting tank and installed lower (depth of penetration 103 mm) will achieve a drainage performance of up to 4.5 l/sec at a water surface level of 35 mm. This conforms to the discharge performance for flat roof drains with gravity drainage required by DIN EN standard 1253-1 (2003) and will be the result of the water being accelerated in two-steps within the drain. • drainage performance of 4.5 l/sec conforming to standard
01333.100X LX 1110
1
LO
RO
-X P
ara
pe
t d
ire
ct
ra
in w
ate
r d
ra
ina
ge
AK
TU
ELL S
ER
IE 4
3 A
TTIK
A D
IREK
T E
NG
3
LO
RO
-X p
ara
pe
t-d
ire
ct-
dra
ins
Se
rie
s 4
3
Ma
in d
ra
ina
ge
Gra
vity d
ra
ina
ge
DN
70
DN
10
0D
N 7
0D
N 1
00
DN
10
0D
N 1
00
DN
10
0
adhesi
ve b
ondin
g
flange 4
5°
T-p
iece
T-p
iece
T-p
iece
T-p
iece
T-p
iece
colle
cto
rbend
adhesi
ve b
ondin
g
flange 4
5°
adhesi
ve b
ondin
g
flange 4
5°
adhesi
ve b
ondin
g
flange 4
5°
adhesi
ve b
ondin
g
flange 4
5°
adhesi
ve b
ondin
g
flange 4
5°
cla
mpin
g fla
nge
90°
LX
62
0LX
62
1LX
65
0LX
64
7LX
65
3LX
69
4LX
11
10
LX
-No
.
Fla
nge form
Um
lenku
ng
we
ir h
eig
ht
hheavy
> 6
0m
m
mediu
m <
50m
m
low
< 4
0m
m
heavy
> 7
5m
m
mediu
m <
55m
m
low
< 3
5m
m
dra
ina
ge
Q (
l/se
c)
6 l/
sec
5 l/
sec
4 l/
sec
3 l/
sec
2 l/
sec
1 l/
sec
Silent
po
wer c
lass
pow
er
sile
nt pow
er
slent
Sile
nt
20 m
m35 m
m52 m
m52 m
m52 m
m103 m
m
0 m
m0 m
m0 m
m0 m
m0 m
m0 m
m0 m
m
wa
ter h
eig
ht
h
0,8
l/se
c1,2
l/se
c1,7
l/se
c2,3
l/se
c3,0
l/se
c
4,5
l/se
c4,5
l/se
c
35 m
m35 m
m35 m
m35 m
m35 m
m35 m
m35 m
m
sile
nt
sile
nt
sile
nt
sile
nt
sile
nt
sile
nt
sile
nt
no
min
al in
ne
r d
iam
ete
r
de
pth
of
pe
ne
tra
tio
n
depth
of
penetr
atio
n
wate
rheig
ht h
dra
inage
Q (
l/se
c)
4
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Parapet direct drains
hQ - Head-Discharge curve CAD
Specification sheet LX 620
LX 620 Piece list 1 x Art.-No. 01316.070X, LORO-X Parapet direct drain 1 x Art.-No. 01301.070X, LORO-X Pipe with one socket 1 x Art.-No. 13235.070X, LORO-sliding flange 1 x Art.-No. 00200.CC0X, LORO-X branch 1 x Art.-No. 13217.070X, vent piece
Systempower Systemshape
Water height
Discharge
mm
l/sec
5
10
15
20
0,4
25
0,5
30
0,7
35
0,8
40
1
45
1,2
50
1,3
55
1,6
60
1,7
65
1,8
70
1,9
75
2,1
Silent
Gravity flow
Main drainage
Parapet drainage system Series 43 Parapet direct
for small roof areas
Silent
Discharge rate: 0,8 l/sec
Water height: 35 mm
Roof penetration: 0 mm
Diameter: DN 70
LX-Number: LX 620
Weir height: 0 mm
Drain: ventilated
Downpipe: ventilated
Downpipe height: 4,2 m
Drainage: in sewer
Flange form: bonding flange 45°
1 x Art.-No. 13217.070X, vent piece 1 x Art.-No. 05510.070X, LORO-X standpipe 5 x Art.-No. 00911.070X, LORO-X sealing elements 3 x Art.-No. 00973.070X, LORO-X pipe clamps 1 x Art.-No. 00986.000X, LORO-X lubricant 3 x Art.-No. 09603.200X, LORO-X threaded rods
Specification sheet LX 620
Discharge Q [l/sec]
5
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Parapet direct drains
Specification sheet LX 620
Drain article No. 01316.070X Weight: 4,7 kg
with bonding flange
for bituminous roofing sheets
LORO-X Parapet direct drain for small roof areas
LORO-X Sliding flanges
with pre-installed connection sleeve for vapor barrier made of bituminous or plastic- roofing
sheets (please indicate manufacturer and material of the sealing sheet to be attached), made of galvanizedsteel,includingfasteningscrews
Article no. 13235.070X Weight: 1,4 kg
19510
144
230
107
77
40
30
400270
190310
785
190
400
150
77
2
ø73
3°
385
Heat tracing: Lorowerk recommends to check all drains and pipes with regard to their frost-sensibility. Where necessary, these parts should be upgraded with heat tracing.
LX620-3X
DN 70
6
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Parapet direct drains
hQ - Head-Discharge curve CAD
Specification sheet LX 621
Systempower Systemshape
Water height
Discharge
mm
l/sec
5
10
15
0,4
20
0,6
25
0,8
30
1,0
35
1,2
40
1,5
45
1,7
50
2
55
2,3
60
2,6
65
2,8
70
3,2
75
3,4
Silent
LX 621 Piece list 1 x Art.-No. 01316.100X, parapet direct drain 1 x Art.-No. 01301.100X, LORO-X pipe with one socket 1 x Art.-No. 13235.100X, LORO-sliding flange 1 x Art.-No. 00200.DD0X, LORO-X branch 1 x Art.-No. 01001.100X, LORO-X pipe with one socket 1 x Art.-Nr. 13217.100X, Belüftungsstück mit Lochblech
Discharge rate: 1,2 l/sec
Water height: 35 mm
Roof penetration: 0 mm
Diameter: DN 100
LX-Number: LX 621
Weir height: 0 mm
Drain: ventilated
Downpipe: ventilated
Downpipe height: 4,2 m
Drainage: in sewer
Flange form: Bonding flange 45°
1 x Art.-No. 13217.100X, vent piece 1 x Art.-No. 05510.100X, LORO-X standpipe 5 x Art.-No. 00911.100X, LORO-X sealing element 3 x Art.-No. 00975.100X, LORO-X pipe clamp 1 x Art.-No. 00986.000X, LORO-X lubricant 3 x Art.-No. 09604.200X, LORO-X threaded rods
Gravity flow
Main drainage
Parapet drainage system Series 43 Parapet direct
for small roof areas
Silent
Specification sheet LX 621
Discharge Q [l/sec]
7
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Parapet direct drains
Specification sheet LX 621
Drain article No. 01316.100X Weight: 5,4 kg
with bonding flange for bituminous roofing sheets
LORO-X Parapet direct drain for small roof areas
Individual components LORO-X Sliding flanges
with pre-installed connection sleeve for vapor barrier made of bituminous or plastic- roofing sheets
(please indicate manufacturer and material of the sealing sheet to be attached), made of galvanizedsteel,includingfasteningscrews
Article no. 13235.100X Weight: 1,7 kg
238
275
147
115
40
180
3610
400270
190310
785190
400
150
77
2
ø102
3°
385
Heat tracing: Lorowerk recommends to check all drains and pipes with regard to their frost-sensibility. Where necessary, these parts should be upgraded with heat tracing.
LX621-3X
DN 70
8
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Scupper direct drains
hQ - Head-Discharge curve CAD
Specification sheet LX 650
Systempower Systemshape
Water height
Discharge
mm
l/sec
5
10
0,9
15
1,4
20
1,7
25
2,0
30
2,1
35
2,3
40
2,4
45
2,6
50
2,7
55
2,8
60
2,9
65
2,9
70
3
75
3,2
Silent
LX 650 Piece list 1 x Art.-No. 01330.070X, Parapet direct drain 1 x Art.-No. 13235.070X, LORO-sliding flange 1 x Art.-No. 01301.070X, LORO-X pipe with one socket 1 x Art.-No. 00200.CC0X, LORO-X branch 1 x Art.-No. 13217.070X, vent piece
Parapet drainage system Series 43 Parapet direct
with basin
Discharge rate: 2,3 l/sec
Water height: 35 mm
Roof penetration: 52 mm
Diameter: DN 70
LX-Number: LX 650
Weir height: 0 mm
Drain: ventilated
Downpipe: ventilated
Downpipe height: 4,2 m
Drainage: in sewer
Flange form: Bonding flange 45°
1 x Art.-No. 01001.070X, LORO-X pipe with one socket 1 x Art.-No. 05510.070X, LORO-X standpipe 5 x Art.-No. 00911.070X, LORO-X sealing element 3 x Art.-No. 00973.070X, LORO-X pipe clamp 1 x Art.-No. 00986.000X, LORO-X lubricant 3 x Art.-No. 09603.200X, LORO-X threade rods
Specification sheet LX 650
Gravity flow
Main drainage
Silent
Discharge Q [l/sec]
9
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Parapet direct drains
Specification sheet LX 650
Drain article No. 01330.070X Weight: 7,4 kg
with bonding flange for bituminous roofing sheets
LORO-X Parapet direct drain with basin
LORO-X Sliding flanges
with pre-installed connection sleeve for vapor barrier made of bituminous or plastic- roofing sheets
(please indicate manufacturer and material of the sealing sheet to be attached), made of galvanizedsteel,includingfasteningscrews
Article no. 13235.070X Weight: 1,4 kg
19510
230
107
77
40
144
30
317
717204 400
217
480
254
97
522
ø73
3°
Heat tracing: Lorowerk recommends to check all drains and pipes with regard to their frost-sensibility. Where necessary, these parts should be upgraded with heat tracing.
LX650-3X
DN 70
10
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Parapet direct drains
hQ - Head-Discharge curve CAD
Systempower Systemshape
Water height
Discharge
mm
l/sec
5
10
15
0,8
20
1,5
25
2,1
30
2,6
35
3,0
40
3,4
45
3,7
50
4
55
4,3
60
4,5
65
4,8
70
5
75
5,2
Silent
LX 647 Piece list 1 x Art.-No. 01330.100X, Parapet direct drain 1 x Art.-No. 13235.100X, LORO-sliding flange 1 x Art.-No. 01301.100X, LORO-X pipe with one socket 1 x Art.-No. 00200.DD0X, LORO-X branch 1 x Art.-No. 13217.100X, vent piece
Specification sheet LX 647
Discharge rate: 3,0 l/sec
Water height: 35 mm
Roof penetration: 52 mm
Diameter: DN 100
LX-Number: LX 647
Weir height: 0 mm
Drain: ventilated
Downpipe: ventilated
Downpipe height: 4,2 m
Drainage: in sewer
Flange form: Bonding flange 45°
1 x Art.-No. 01001.100X, LORO-X pipe with one socket 1 x Art.-No. 05510.100X, LORO-X standpipe 5 x Art.-No. 00911.100X, LORO-X sealing elements 3 x Art.-No. 00975.070X, LORO-X pipe clamps 1 x Art.-No. 00986.000X, LORO-X lubricant 3 x Art.-No. 09604.200X, LORO-X threaded rods
Specification sheet LX 647
Parapet drainage system Series 43 Parapet direct
with basin
Gravity flow
Main drainage
Silent
Discharge Q [l/sec]
11
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Parapet direct drains
Specification sheet LX 647
LORO-X Parapet direct drain with basin
238
275
147
115
40
180
3610
317
717204 400
217
480
254
97
522
ø102
3°
Heat tracing: Lorowerk recommends to check all drains and pipes with regard to their frost-sensibility. Where necessary, these parts should be upgraded with heat tracing.
Drain article No. 01330.100X Weight: 8,2 kg
with bonding flange for bituminous roofing sheets
LORO-X Sliding flanges
with pre-installed connection sleeve for vapor barrier made of bituminous or plastic- roofing sheets
(please indicate manufacturer and material of the sealing sheet to be attached), made of galvanizedsteel,includingfasteningscrews
Article no. 13235.100X Weight: 1,7 kg
LX647-3X
DN 100
12
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Parapet direct drains
hQ - Head-Discharge curve CAD
Systempower Systemform
Water height
Discharge
mm
l/sec
5
0,4
10
0,8
15
1,2
20
2,0
25
2,7
30
3,5
35
4,5
40
5
45
5,5
50
6,2
55
7
60
7,8
65
8,4
70
9
75
10
Silent
LX 653 Piece list 1 x Art.-No. 01320.100X, Parapet direct drain 1 x Art.-No. 01301.100X, LORO-X pipe with one socket 1 x Art.-No. 13228.100X, LORO-sliding flange 1 x Art.-No. 00440.100X, LORO-X collector 1 x Art.-No. 01001.100X, LORO-X pipe with one socket
Specification sheet LX 653
Discharge rate: 4,5 l/sec
Water height: 35 mm
Roof penetration: 52 mm
Diameter: DN 100
LX-Number: LX 653
Weir height: 0 mm
Drain: ventilated
Downpipe: ventilated
Downpipe height: 4,2 m
Drainage: in sewer
Flange form: Bonding flnage 45°
1 x Art.-No. 05510.100X, LORO-X standpipe 6 x Art.-No. 00911.100X, LORO-X sealing elements 3 x Art.-No. 00975.100X, LORO-X pipe clamps 1 x Art.-No. 00986.000X, LORO-X lubricant 3 x Art.-No. 09604.200X, LORO-X threaded rods
Specification sheet LX 653
Parapet drainage system Series 43 Parapet direct
with basin
Gravity flow
Main drainage
Silent
Discharge Q [l/sec]
13
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Parapet direct drains
Specification sheet LX 653
Drain article No. 01320.100X Weight: 10,2 kg
with bonding flange for bituminous roofing sheets
LORO-X Parapet direct drain with basin
LORO-X sliding flange
for attaching the vapor barrier, fixed and loose flange construction,madeofgalvanizedsteel,
including sealing elementArticle no. 13228.100X
Weight: 4,9 kg
260
130140130
400
317
717204 400
217
480
ø102
254
97
522
140
3°
Heat tracing: Lorowerk recommends to check all drains and pipes with regard to their frost-sensibility. Where necessary, these parts should be upgraded with heat tracing.
LX653-3X
DN 100
14
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Parapet direct drains
hQ - Head-Discharge curve
Systempower Systemshape
Water height
Discharge
mm
l/sec
5
10
0,6
15
1,2
20
2,0
25
2,7
30
3,7
35
4,5
40
5,5
45
6
50
7
55
8
60
8,2
65
9,5
70
10,2
75
11,1
Silent
LX 694 Piece list 1 x Art.-No. 01350.100X, Parapet direct drain 1 x Art.-No. 01301.100X, LORO-X pipe with one socket 1 x Art.-No. 13235.100X, LORO-sliding flange 1 x Art.-No. 00200.DD0X, LORO-X branch 1 x Art.-No. 13217.100X, LORO-X vent piece
Specification sheet LX 694
Discharge rate: 4,5 l/sec
Water height: 35 mm
Roof penetration: 103 mm
Diameter: DN 100
LX-Number: LX 694
Weir height: 0 mm
Drain: ventilated
Downpipe: ventilated
Downpipe height: 4,2 m
Drainage: in sewer
Flange form: Bonding flange 45°
1 x Art.-No. 01001.100X, LORO-X pipe with one socket 1 x Art.-No. 05510.100X, LORO-X standpipe 5 x Art.-No. 00911.100X, LORO-X sealing elements 3 x Art.-No. 00975.100X, LORO-X pipe clamps 1 x Art.-No. 00986.000X, LORO-X lubricant 3 x Art.-No. 09604.200X, LORO-X threaded rods
Specification sheet LX 694
Parapet drainage system Series 43 Parapet direct
with basin
Gravity flow
Main drainage
Silent
CAD
Discharge Q [l/sec]
15
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Parapet direct drains
Specification sheet LX 694
Drain article No. 01350.100X Weight: 8,6 kg
with bonding flange for bituminous roofing sheets
LORO-X Parapet direct drain with basin
LORO-X Sliding flanges
with pre-installed connection sleeve for vapor barrier made of bituminous or plastic- roofing sheets
(please indicate manufacturer and material of the sealing sheet to be attached), made of galvanizedsteel,includingfasteningscrews
Article no. 13235.100X Weight: 1,7 kg
23810
275
147
115
40180
36
317
717204 400
217
103
480
254
97
522
ø102
3°
Heat tracing: Lorowerk recommends to check all drains and pipes with regard to their frost-sensibility. Where necessary, these parts should be upgraded with heat tracing.
LX694-3X
DN 100
Datei: "LSP 1110 DIA.RAG" Datum: 05.10.10Seite 1 von 2
0 0,5 1 1,5 2 2,5 3 3,5 4 4,5 50
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
0Was
serh
öh
e h
[m
m]
LORO-X Dachentwässerungssystem
Abfluß Q [l/s]
LORO Attika Freispiegelablauf mit DRAINLET Haube,Hauptablauf DN 100, mit T-Stück offen,Versatz 1,2
LORO-X Abflusskurve
Wasserhöhe mm 10 15 20 25 30 35 40 45 50 55 60 65 70 75
Abfluss l/s 0,5 0,7 0,9 1,1 1,4 1,7 1,9 2,2 2,4 2,5 2,8 3,1 3,2 3,4
LX 1110FreispiegelströmungHaupentwässerung
CAD
Water height
Discharge
mm
l/sec
5 10 15 20
25
30
35 40 45 50 55 60 65 70 75
Silent
Systempower Systemshape
hQ - Head Discharge curve
16
LX DATENBLATT1110 ENG
LORO-X Parapet direct drains
0,5 0,7 0,9 1,1 1,4 1,7 1,9 2,2 2,4 2,5 2,8 3,1 3,2 3,4
Gravity flow
Main drainage
Silent Power
Discharge rate: 1,7 l/sec
Water height: 35 mm
Roof penetration: 0 mm
Diameter: DN 100
LX-Number: LX 1110
Weir height: 0 mm
Drain: ventilated
Downpipe: ventilated
Downpipe height: 4,2 m
Drainage: In sewer
Flange form: Clamping flange 90°
Specification sheet LX 1110
Specification sheet LX 1110
Parapet drainage system Series 43 Parapet direct
without penetrating the roof
LX 1110 Piece list 1 x Art.-No. 01333.100X, scupper drain 1 x Art.-No. 13236.100X, LORO-X sliding flange 1 x Art.-No. 00220.DD0X, LORO-branch 1 x Art.-No. 13217.100X, vent piece 1 x Art.-No. 01001.100X, LORO-X pipe with one socket
1 x Art.-Nr. 05510.100X, LORO-X standpipe3 x Art.-Nr. 00975.100X, LORO-X pipe clamps 3 x Art.-Nr. 09604.200X, LORO-X threaded rods 4 x Art.-Nr. 00911.100X, LORO-X sealing elements 1 x Art.-Nr. 00986.000X, LORO-X lubricant
Discharge Q [l/sec]
Wa
ter h
eig
ht
h [m
m]
17
LORO-X Parapet direct drains
LORO-X Parapet direct drain, without penetrating the roof
LX DATENBLATT1110 ENG
LORO-X Sliding flanges
with pre-installed connection sleeve for vapor barrier made of bituminous or plastic- roofing sheets
(please indicate manufacturer and material of the sealing sheet to be attached), made of galvanizedsteel,includingfasteningscrews
Article no. 13236.100X Weight: 1,6 kg
238
275
147
115
40
180
36
Heat tracing: Lorowerk recommends to check all drains and pipes with regard to their frost-sensibility. Where necessary, these parts should be upgraded with heat tracing.
3°
140
90
37
108
300
400
210
ø102
DN 100
Drain article No. 01333.100X Weight: 5,7 kg
with clamping flange 90° for plastic roofing sheets
LX1110-1X
Specification sheet LX 1110
18
AKTUELL SERIE 43 ATTIKA DIREKT ENG
LORO-X Parapet direct drains
Series 43
Germany LOROWERK K.H. Vahlbrauk GmbH&Co.KG Kriegerweg 1 37581 Bad Gandersheim Tel.: +49 53 82 710 [email protected] Peter Kuck Export director Schlipsheimer Str. 119 86356 Neusaess Tel.: +49 821.248 90 59 [email protected] Norway SHELBY TEKNIKK A/S Strandgaten 55 N-4371 Egersund Tel.: +47 51 461 800 [email protected] Finnland OY INTERCO AB Elimäenkatu 12 - 16A FI-00510 Helsinki Tel.: +358 9 774 3220 [email protected] Great Britain TRANSVAC SYSTEMS Marlowe House, Unit B Rudford Industrial Estate Ford, Arundel UK-West Sussex BN 18 OBF Tel.: +44 1903 736 900 [email protected] Denmark BAHEKO A/S Vandmestervej 37 DK-2630 Taastrup Tel.: +45 43 991 611 [email protected] Netherland/Belgium LOROMEIJ-GOOR B.V. Gruttostraat 75 NL-7470 AB Goor Tel.: +31 547 272 696 [email protected] Luxembourg LOROWERK K.H.Vahlbrauk GmbH & Co.KG Ullrich Stichnoth Offenbacher Str. 24 D-63263 Neu-Isenburg Tel.: +49 6102 308549 [email protected] Poland/Baltic States KRZYSZTOF PAMULA Im Spargelfeld 23 A D-31626 Haßbergen Tel.: +49 5024 88 78 44 [email protected] Czech Republic TOPWET s.r.o. Náměstí Viléma Mrštíka 62 CZ-664 81 Ostrovačice Tel.: +420 530 507 486 [email protected] Slovak Republic SLOVINTERNORM s.r.o. Stare Grunty 130 SK-84104 Bratislava Tel.: +421 2 555 644 79 [email protected]
Slovenia SIES napredne resitive d.o.o. Danijel Voncina UlicaLavznik19 SI-5290 Sempeter pri Gorici Tel.: +386 5 93 75 152 [email protected]
Austria LOROWERK K.H.Vahlbrauk GmbH & Co.KG Matthias de Waal Oskar-Helmer-Str. 22 2540 Bad Vöslau Mobil: +43 664 413 320 0 [email protected] Switzerland WISAN TECHNIK AG Gubelstr. 19 CH-6300 Zug Tel.: +41 41 711 50 35 [email protected] Romania SEVA-GROUP SRL Strada Vulturului 15 RO-500264 Brasov Tel.: +40 268 312 826 [email protected] Portugal Shipbuilding only: MARINE-TECHNIK-SERVICE Ausblick 22 D-42113 Wuppertal Tel.: +49 202 720 002 [email protected]
Spain GEPRO PLUS S.L. Camilo José Cela, 32 E-19200AzuquecadeHenares Tel.: +34 949 260 281 [email protected] Italy/Croatia Fabio Marabini consulente tecniche ViaBorgoPalazzo116 I-24125 Bergamo Tel.: +39 035 210 081 [email protected] Bulgaria Shipbuilding only: MORGAN Ltd. 29 A, Michael Koloni Str. BG-9000 Varna Tel.: +359 52/631 222, 615 709 [email protected] Greece JGP HELLAS Ltd. Marine & Industrial Equipment 6,Bouboulinas Street GR-18535 Piräus Tel.: +30 210 422 37 48 [email protected]
Internationalrepresentatives
Russia ООО ТД „АМА“ Ул. Минеральная д. 13, лит.Ш 195197 Санкт-Петербург, Россия Maikl Tuzikov Михаил Тузиков Tel: 7 (812) 540 22 57 7 (901) 301 03 05 mobile e-mail: [email protected] Maikl Ayvasov Михаил Айвазов Tel: 7 (812) 542 97 44 7 (901) 316 59 69 (mobile) [email protected] OOO AMA Ltd. 13, Mineralnaya str., 195197 St.Petersburg Tel: 7 (812) 540 22 57 [email protected] China PROCO INTERNATIONAL Ltd. Unit 1913,19/F BEA Tower, Millenium City 5, 418 Kwun Tong Road, Kwun Tong, Kowloon Hong Kong Tel.: +852 28 24-39 00 [email protected] Singapore/Malaysia Marketing M&E 2000 pte ltd. Herr Edmund Kan 50 Ubi Ave 3# 02-09 Singapore 408866 Tel.: +65 6285 9296 [email protected] Vietnam Proco International Company Limited Vietnam Representative Office Room 805, 8/F., Thang Long Building, 105 Lang Ha, Dong Da, Hanoi, Vietnam Tel : 84-43-5625288, 84-43-5625289 [email protected] United States Building Construction: LORO-JOSAM 525 West Hwy. 20 Michigan City, IN 46360 Tel.: +1 219 872 5533 [email protected] Shipbuilding only: GLOBAL SUPPLY COMPANY 590 Ansin Blvd. Hallendale, Fl 33009 Tel.: +1 954 454 1234 [email protected]