2
LOW PROFILE, DUAL COLOR ROOFTOP LIGHTBAR • Compliance: SAE J845 Class 1; CA Title 13; ECE R65 Class 2; ECE R10; NFPA 1901 ZONE A UPPER* (*Special Order) Note: actual approvals may vary; based on actual model ordered. • Flash Patterns: 12 x 3 Flash Modes + Custom Programming • Operating Voltage: 12VDC • Input / Wire Gauges: Power Cable: 15.7’ 2 x +Vcc Power Wire @12AWG 2 x -GND Power Wire @12AWG Function Harness: 15.7’ 16 x Function Wire @ 22AWG SPECIFICATIONS • Low profile, streamlined design maximizes fuel economy while also reducing wind noise • New Facet-X Optics™ (patent-pending) produce brilliant, seamless output & impressive off-axis output • Dual color inboard lightheads provide dual functionality (flood/ scene, amber traffic arrow conversion) • Full and half size inboard lightheads ensure contiguous population in all lengths (no blanks required to evenly split a color combination) • Dual dome design utilizes just two lenses w/ a centrally located silicon coupler, easing field maintenance / lighthead reconfiguration • UV INFUSED lenses repel & reduce the effects of harsh weather & road conditions • Rigid aluminum base creates a sturdy base and provides optimum heat dissipation. Top aluminum plate protects interior components from the negative effects of the sun • Available lengths: 44”, 48” & 54” FEATURES FEATURES • Corners: 9 LED single color, 18 LED dual color • Inboards: 3 LED single color (short), 6 LED dual color (short) 6 LED single color (standard), 12 LED dual color (standard) • Optional: 3 LED alley light, 3 LED take-down short LIGHTHEAD OPTIONS 888.439.1925 www.brookingindustries.com 104 Liberty Center Place | St. Augustine, FL 32092 CURRENT & FUSE RATING SUGGESTED FUSE RATING Current Max. Current (A) @12.8VDC Avg. Current (A) @12.8VDC Corner Lighthead 1.90 / each 0.95 / each Middle Lighthead (Standard) 1.26 / each 0.63 / each Middle Lighthead (Short) 0.63 / each 0.32 / each Takedown Lighthead 0.67 / each 0.61 / each Alley Lighthead 0.67 / each 0.61 / each Fuse Rating @12.8VDC Corner Lighthead +2.56A / each Middle Lighthead (Standard) +1.71A / each Middle Lighthead (Short) +0.85A / each Takedown Lighthead +0.90A / each Alley Lighthead +0.90A / each Current Max. Power (W) @12.8VDC Avg. Power (W) @12.8VDC Corner Lighthead 24.27 / each 12.13 / each Middle Lighthead (Standard) 16.18 / each 8.09 / each Middle Lighthead (Short) 8.09 / each 4.04 / each Takedown Lighthead 8.54 / each 7.76 / each Alley Lighthead 8.54 / each 7.76 / each NOTE: Total amp draw / power consumption depends on the configuration of the lightbar. Use chart to calculate the total based on your lightbar configuration. NOTE: Please calculate the fuse requirement based on your lightbar configuration. • LED Colors: Red, Blue, Amber, White or Green (Single or Dual Color) • Dual color stocking combinations: BW, RW, AW, BA, RA, RB. GA (other combinations are special order) • Lens Color: Clear COLOR OPTIONS APPROVALS CA Title 13 ECE R10 ECE R65 SAE J595 Class 1 SAE J845 Class 1

LOW PROFILE, DUAL COLOR ROOFTOP LIGHTBAR

  • Upload
    others

  • View
    10

  • Download
    0

Embed Size (px)

Citation preview

LOW PROFILE, DUAL COLORROOFTOP LIGHTBAR

• Compliance: SAE J845 Class 1; CA Title 13; ECE R65 Class 2; ECE R10; NFPA 1901 ZONE A UPPER* (*Special Order) Note: actual approvals may vary; based on actual model ordered.

• Flash Patterns: 12 x 3 Flash Modes + Custom Programming• Operating Voltage: 12VDC• Input / Wire Gauges:

Power Cable: 15.7’ 2 x +Vcc Power Wire @12AWG 2 x -GND Power Wire @12AWG

Function Harness: 15.7’ 16 x Function Wire @ 22AWG

SPECIFICATIONS

• Low profile, streamlined design maximizes fuel economy while also reducing wind noise

• New Facet-X Optics™ (patent-pending) produce brilliant, seamless output & impressive off-axis output

• Dual color inboard lightheads provide dual functionality (flood/scene, amber traffic arrow conversion)

• Full and half size inboard lightheads ensure contiguous population in all lengths (no blanks required to evenly split a color combination)

• Dual dome design utilizes just two lenses w/ a centrally located silicon coupler, easing field maintenance / lighthead reconfiguration

• UV INFUSED lenses repel & reduce the effects of harsh weather & road conditions

• Rigid aluminum base creates a sturdy base and provides optimum heat dissipation. Top aluminum plate protects interior components from the negative effects of the sun

• Available lengths: 44”, 48” & 54”

FEATURESFEATURES

• Corners: 9 LED single color, 18 LED dual color• Inboards: 3 LED single color (short), 6 LED dual color (short) 6 LED

single color (standard), 12 LED dual color (standard)• Optional: 3 LED alley light, 3 LED take-down short

LIGHTHEAD OPTIONS

888.439.1925www.brookingindustries.com

104 Liberty Center Place | St. Augustine, FL 32092

CURRENT & FUSE RATING

SUGGESTED FUSE RATING

CurrentMax. Current (A)

@12.8VDCAvg. Current (A)

@12.8VDCCorner Lighthead 1.90 / each 0.95 / each

Middle Lighthead (Standard) 1.26 / each 0.63 / each

Middle Lighthead (Short) 0.63 / each 0.32 / each

Takedown Lighthead 0.67 / each 0.61 / each

Alley Lighthead 0.67 / each 0.61 / each

Fuse Rating @12.8VDCCorner Lighthead +2.56A / each

Middle Lighthead (Standard) +1.71A / each

Middle Lighthead (Short) +0.85A / each

Takedown Lighthead +0.90A / each

Alley Lighthead +0.90A / each

CurrentMax. Power (W)

@12.8VDCAvg. Power (W)

@12.8VDCCorner Lighthead 24.27 / each 12.13 / each

Middle Lighthead (Standard) 16.18 / each 8.09 / each

Middle Lighthead (Short) 8.09 / each 4.04 / each

Takedown Lighthead 8.54 / each 7.76 / each

Alley Lighthead 8.54 / each 7.76 / each

NOTE: Total amp draw / power consumption depends on the configuration of the lightbar. Use chart to calculate the total based on your lightbar configuration.

NOTE: Please calculate the fuse requirement based on your lightbar configuration.

• LED Colors: Red, Blue, Amber, White or Green (Single or Dual Color)• Dual color stocking combinations: BW, RW, AW, BA, RA, RB. GA

(other combinations are special order)• Lens Color: Clear

COLOR OPTIONS

APPROVALS

CATitle 13

ECER10

ECER65

SAEJ595

Class 1

SAEJ845

Class 1

MOUNTS

99-LSBDM00-000 Low Profile Standard Brackets(For use w/ strap kit, contact your sales representative.)

99-LSBDM01-000 Low Profile Narrow Flat Surface Mount Brackets

99-LSBDM02-000 Low Profile Wide Flat Surface Mount Brackets

99-LSBDM03-000 2º Angle Wedge (For use with 99-LSBDM00-000)

FEATURESDIMENSIONS

FEATURESCONFIGURATIONS

▼ 43.78"

▼ 48.6"

▼53.5" 11.48"

1.69

"

ALAL

FRC

RRC

FLC

RLC

FL2FL3FL4 FL1

RL2RL3RL4 RL1

FR1 FR2 FR3 FR4

RR1 RR2 RR3 RR4

FRONT

REAR

FRONT

REAR

ALAL

FRC

RRC

FLC

RLC

FR1 FR2 FR3 FR4

RR1 RR2 RR3 RR4

FL1FL2FL3FL4

RL1RL2RL3RL4

AL AL

FRC

RRC

FLC

RLC

FL2FL3FL4 FL1FL5

RL2RL3RL4 RL1RL5

FR1 FR2 FR3 FR4 FR5

RR1 RR2 RR3 RR4 RR5

FRONT

ALAL

FRC

RRC

FLC

RLC

FL3FL4FL5

RL3RL4RL5

FR3 FR4 FR5

RR3 RR4 RR5

FRONT

REAR

TD2 FR2FL2 TD1

RR1 RR2RL2 RL1

FRONT

REAR

ALAL

FRC

RRC

FLC

RLC

TD2 FR4 FR5

RR1

FR2

RR2

FR3

RR3 RR4 RR5

TD1FL2FL3

RL2RL3

FL4FL5

RL1RL4RL5

AL AL

FRC

RRC

FLC

RLC

FL4FL5 TD1FL6

RL3RL4 RL1

FL2FL3

RL2RL5

TD2 FR4 FR5 FR6

RR1

FR2 FR3

RR2 RR3 RR4 RR5

REAR

FRONT

-Cable-ExitContact your local Brooking representative for information regarding standard / stocked configurations.Deviation from standard / stocked configurations will result in longer lead times.

Available Model Lengths:

Without spot beam style take-down - Utilize white LED’s for Full Front Flood (dual color model only)

With spot beam style take-down + full front flood (dual color model only)

Height & Depth: