LSP - Lakeshore Products 2014 Catalog sm spr2.pdfUnder Deck Bunk Bundle LSV30/40B LS5004BU Stainless Steel Bolt Kits all LS5010B/BP Direct Drive Motor Kit AC all MKLTA Direct Drive

LIFTS, DOCKS and ACCESSORIES

LSP

Proudly made in Michigan since 1982

tel: 517.639.3815 | www.lakeshoreproducts.comtel: 517.639.3815 | www.lakeshoreproducts.com

LSP

2 3

ALL OF OUR LIFTS ARE CONSTRUCTED OF HIGH STRENGTH ALLOY AIRCRAFT ALUMINUM

SPECIFICATIONS : LIFTS

Canopy fabric is durable Shelter-Rite®18 oz. vinyl coated

polyester. Made in the USA.

SPECIAL SIZES and CUSTOM CURTAINS are available.

Visit our website for details on our Ten/Two Year Limited Warranty.

CA

NO

PIESAC

CESSO

RIES

description used on part numberExtension Leg Kit 1' all PLK1Extension Leg Kit 2' all PLK2Extension Leg Kit 3' all PLK3Extension Leg Kit 4' all PLK4Carpeted Bow Stop all BSPMotor Kit Adapter Kit all EMPKIT

description used on part numberExtension Leg Kit 4' LSC1576 LS502Direct Drive Motor Install Kit LSC1576 20996

model included optional optional optional blue gray tan length width number std legs 6 ' ext legs 7' ext legs brace kit canvas canvas canvas 18' 100" 18AF100B 5' LS5008B LS5009B – CAN18100BL CAN18100GY CAN18100TN 20' 100" 20AF100B 5' LS5008B LS5009B – CAN20100BL CAN20100GY CAN20100TN 22' 108" 22AF108B 5' LS5008B LS5009B – CAN22108BL CAN22108GY CAN22108TN 22' 120" 22AF120B 5' LS5008B LS5009B – CAN22120BL CAN22120GY CAN22120TN 24' 108" 24AF108B 5' LS5008B LS5009B – CAN24108BL CAN24108GY CAN24108TN 24' 120" 24AF120B 5' LS5008B LS5009B – CAN24120BL CAN24120GY CAN24120TN 26' 108" 26AF108B 5' LS5008B LS5009B LS6001 CAN26108BL CAN26108GY CAN26108TN 26' 120" 26AF120B 5' LS5008B LS5009B LS6001 CAN26120BL CAN26120GY CAN26120TN 28' 120" 28AF120B 5' LS5008B LS5009B included CAN28120BL CAN28120GY CAN28120TN 30' 120" 30AF120B 5' LS5008B LS5009B included CAN30120BL CAN30120GY CAN30120TN

model included used blue gray tan length width number std legs on canvas canvas canvas 14' 64" 14AF64 1' LSV1364 CAN1464BL CAN1464GY CAN1464TN 16' 64" 16AF64 1' LSV1364 CAN1664BL CAN1664GY CAN1664TN 14' 64" 14AF64C 3' LSC1264 CAN1464CBL CAN1464CGY CAN1464CTN

model optional blue gray tan length width number brace kit canvas canvas canvas 24' 120" 24AF120FS – CAN24120BL CAN24120GY CAN24120TN 26' 120" 26AF120FS LS6001 CAN26120BL CAN26120GY CAN26120TN 28' 120" 28AF120FS included CAN28120BL CAN28120GY CAN28120TN 30' 120" 30AF120FS included CAN30120BL CAN30120GY CAN30120TN

BOAT

LIF

TSPW

C L

IFTS

PON

TOO

N L

IFTS

ACCESSORIES CANOPIES

CANOPIES

ACCESSORIES

VERTICALpage 4

CANTILEVERpage 10

CANTILEVERpage 6

ACCESSORIES

ACCESSORIES

load capacity beam width outside width lift height weight model number

1500 lbs 76.5” 83.75” 35” 230 lbs LSC1576


2000 lbs 100" 107.75" 54" 345 lbs LSV20100B 3000 lbs 108" 115.75" 54" 395 lbs LSV30108B 3000 lbs 120" 127.75" 54" 405 lbs LSV30120B 4000 lbs 108" 115.75" 54" 420 lbs LSV40108B 4000 lbs 120" 127.75" 54" 430 lbs LSV40120B 5000 lbs 120" 127.75" 52" 470 lbs LSV50120B


3000 lbs 120” 127.75” 54” 425 lbs LSV30120BP 3000 lbs 120” 127.75” 54” 425 lbs LSV30120BP-U 4000 lbs 120” 127.75” 54” 450 lbs LSV40120BP 4000 lbs 120” 127.75” 54” 450 lbs LSV40120BP-U 5000 lbs 120” 127.75” 52” 450 lbs LSV50120BP 5000 lbs 120” 127.75” 52” 450 lbs LSV50120BP-U

load capacity cradle length outside width lift height weight model number

2600 lbs 16’ 47.75” 60” 290 lbs LSP16H 3600 lbs 21’ 47.75” 60” 350 lbs LSP21H 3600 lbs 24’ 47.75” 60” 370 lbs LSP24H 3600 lbs 28’ 47.75” 60” 410 lbs LSP28H

VERTICALpage 8

Perfect for Shallow Water,

Deep Water, and Uneven

Bottoms

Lightweight and

Inexpensive

Best for Deep Water and Uneven

Bottoms

Best for Shallow Water

Operation

VERTICALpage 12



1300 lbs 64” 72” 61” 200 lbs LSV1364

Best for Fluctuating

Water Levels

CANTILEVERpage 14


load capacity cradle length outside width lift height weight model number

800 lbs 50” 54” 28” 105 lbs LSC850 1200 lbs 64” 71.75” 35” 170 lbs LSC1264 800 lbs 50” 110” 28” 225 lbs LSC850D DOUBLE

Lightweight and

Inexpensive

description used on part number

Extension Leg Pair 4' all LS5104B



Walk On Guide On LSV20/30/40B WOGOV30B

Walk On Guide On LSV50B WOGOV50B

Pontoon Bunk Set LSV20/30/40B VPRB

Pontoon Bunk Set LSV50B VPRB-50

Under Deck Bunk Bundle LSV30/40B LS5004BU

Stainless Steel Bolt Kits all LS5010B/BP

Direct Drive Motor Kit AC all MKLTA

Direct Drive Motor Kit AC with remote all MKLTAR

Direct Drive Motor Kit DC all MKLTD

Direct Drive Motor Kit DC with remote all MKLTDR

Wheel Assist Motor Kit 12v all BL12VM

Wheel Assist Motor Kit 110v all BL110VM

Lift Removal Wheel Kit all WK

Diagonal Support LSV40/50B LS5007B

VERTICAL CANTILEVER

description used on part numberExtension Leg Pair 4' LSC850/D LS855Extension Leg Kit 4' LSC1264 LS803Paddle Boat Bunk Set LSC1264 LS802Bolt Pack SS LSC964/1264 BPLSC964SSDirect Drive Motor Install Kit LSC1264/LSV1364 20996

VERTICAL & CANTILEVER PWC

CANTILEVER PONTOON

VERTICAL : page 16

VERTICAL & CANTILEVER PWC : page 12 & page 14 CANVAS COLORS

FREESTANDING : page 17

STANDARD COLORS:

CUSTOM COLORS: BL GY TN

GREEN WHITE

SEE WEBSITE FOR MORE DETAILS : www.lakeshoreproducts.com

LSP

4tel: 517.639.3815 | www.lakeshoreproducts.com

ACC

ESSORIES

EXTENSION DIRECT DRIVE WHEEL ASSIST WALK-ON WHEEL LEGS ELECTRIC MOTOR ELECTRIC MOTOR GUIDE-ON KITS

It’s finally summer and you’re ready to party. You don’t want to spend a lot of time assembling and maintaining your lift.

Our Vertical Lifts are designed to be easy to put together, use and service.

Capacities range from 2000 to 5000 pounds.

Visit our website for details on use in shallow or deep water.

togetherget

with family & friends

5

FULL FEATURED LIFT FOR BOATS UP TO 5,000 LBS

BOAT LIFTS : VERTICAL

STAINLESS STEEL CABLES

Resist rust and corrosion better than galvanized steel.

NEW! VINYL WRAPPED ALUMINUM BUNKS

Gently support your boat without damaging the surface. Fully adjustable to fit your boat. Will not rot or warp, lighter than wood.

IMPROVED WHEEL DESIGN

41" diameter wheel extends further out over the dock, making it easier to operate and reducing interference with the canopy.

REINFORCED MAINFRAME SPREADERS

Resists the damage caused by yearly installation and removal, and strong enough to sit directly on the bottom in shallow water.

36" ADjUSTABLE LEGS WITH PIVOTING PADS

Because lake bottoms are almost never perfectly flat. The legs may be removed for shallow water applications.

SOLID BRASS PULLEYS

Solid brass is expensive and worth it. Brass is the best combination of high strength and low cable abra-sion. It will not corrode and lasts a lifetime. LSV20100B features brass on the front cradle only.

IMPROVED WINCH DESIGN

A larger drum makes the cable last longer.

V CRADLE DESIGN ON 3000 & 4000 LB LIFTS

Designed in a V style to cradle your boat and can be used in very shallow water. (The LSV20100B and the LSV50120B have a straight cradle.)

LSV30108BSEE PAGES 2–3 for a complete list

of models and accessories.

SEE PAGE 16 for canopies.

expand your optionsOur 3000 lb lift can be

easily upgraded to 4000 lb when you decide you need

a bigger boat.

LSP LSP


7

25.5" 30"

95"

19" 26.5"

89"

Minimum water depth WITHOUT LEGS.

Assuming a boat draft of 16". *

Minimum water depth WITH LEGS.

Assuming a boat draft of 16". *

Maximum water depth using the STOCK LEGS.

Longer legs available. *

STRA

IGH

T C

RAD

LE M

OD

ELS

"V" C

RAD

LE M

OD

ELS

Water Depth

Q: Can I overload my lifts? A: No, it's not recommended.

Q: Can I put the lift on either side of my dock? A: Yes.

* These are absolute minimum and maximum depths and not recommendations. Waves, wind, and water level fluctuations might make these minimums and maximums impractical. Talk to your dealer about your situation.

Although we overload these lifts when we test them, we still recommend that you follow the weight ratings. Overloading a lift will void the warranty.

VERTICAL CANTILEVER

HEAVY DUTY WINCH

Durable zinc plating resists rust better than a painted winch.

25" ALUMINUM WHEEL

Easy to use, powder coated in our signa-ture red for a durable long lasting finish.

FULLY ADjUSTABLE LEGS

Come standard on all of our lifts. Longer length legs are available for deep water.

WELDED BUSHINGS

Provide extra reinforcement at pivot points, unlike drilled holes that can wear out.

ExCLUSIVE PULLEY BAR DESIGN

One piece design works better than independent pulleys, results in longer cable life, and shields your boat from contact with the cable.

LSC1576SEE PAGES 2–3 for a complete list


LIGHTWEIGHT INEXPENSIVE LIFT FOR SMALL BOATS

BOAT LIFTS : CANTILEVER


Fully adjustable to fit your boat. Will not rot or warp.

6

LSP LIFTS : FAQ

lightweight & inexpensive

Perfect for sail boats, aluminum fishing boats, small outboards

and large PWC’s.

This lift will handle up to 1500 lb and accommodate

boats up to 76" wide.

LSP


FULL FEATURED LIFT FOR PONTOON BOATS UP TO 5,000 LBS

PONTOON LIFTS : VERTICAL

IMPROVED WHEEL DESIGN

41" diameter wheel extends further out over the dock, making it easier to operate and reducing interference with the canopy.

NEW! VINYL WRAPPED ALUMINUM LONG V BUNKS

Help guide your boat onto the lift and gently support it without damaging the surface. Fully adjustable to fit your pontoons. Will not rot or warp and lighter than wood.


Resist rust and corrosion better than galvanized steel.

SOLID BRASS PULLEYS

Solid brass is expensive and worth it. Brass is the best com-bination of high strength and low cable abrasion. It will not corrode and lasts a lifetime.

REINFORCED MAINFRAME SPREADERS

Resist the damage caused by yearly installation and removal, and strong enough to sit directly on the bottom in shallow water.

36" ADjUSTABLE LEGS WITH PIVOTING PADS

Because lake bottoms are almost never perfectly flat. The legs may be removed for shallow water applications.

IMPROVED WINCH DESIGN

A larger drum makes the cable last longer.

LSV30120BPSEE PAGES 2–3 for a complete list


SEE PAGE 16 for canopies.

ACC

ESSORIES

EXTENSION DIRECT DRIVE WHEEL ASSIST WHEEL LEGS ELECTRIC MOTOR ELECTRIC MOTOR KITS

summertime… and the living iseasy

Summer at the lake. Time to relax and take it easy.

Our trailer type bunks make it easy to dock your boat perfectly every time.

By adding a canopy, you can eliminate the inconvenience of having to snap the mooring cover on.

LSV40120BP-UAlso available with our Under Deck Bunks for lifting the boat by the deck. These lifts

are our BPU models.

9

LSP

tel: 517.639.3815 | www.lakeshoreproducts.com11

water too shallow for

a pontoon lift?Think again!

If you have shallow water and a sandy bottom

this lift is ideal.

keep itsimpleLife can be complicated. So keep your summer simple.

Using our Cantilever Pontoon Lift is the simplest and least expensive way to secure your pontoon boat.

THE BEST PONTOON LIFT FOR REALLY SHALLOW WATER

PONTOON LIFTS : CANTILEVER

FULL LENGTH CRADLES

Designed to evenly support the deck of your pontoon boat along the entire length. This protects your pontoon boat from deck fatigue.

NON MARKING ROLLERS

White polyester rollers gently guide your boat onto the lift without damage or marks.

DOCKSIDE WHEEL DESIGN

Innovative design extends out 29" from the lift to allow easy cranking from the dock. The 32" diameter wheel is powder coated for a durable finish.

HEAVY DUTY WINCH

Heavy duty winch has greater strength and dependability than lightweight "trailer" type winches that other manufacturers use. New design allows winch to be positioned on either side of the lift.

LSP21HSEE PAGES 2–3 for a complete list


10

ACC

ESSORIES

EXTENSION DIRECT DRIVE WHEEL ASSIST WHEEL LEGS ELECTRIC MOTOR ELECTRIC MOTOR BOW STOP KITS

LSP


FINALLY, A PWC LIFT DESIGNED FOR FLUCTUATING WATER LEVELS

PWC LIFTS : VERTICAL

HEAVY DUTY WINCH

We oversize all of our winches for extra safety and easy cranking. Durable zinc plating resists rust better than a painted winch.

25" ALUMINUM WHEEL

Easy to use, powder coated in our signature red for a durable long lasting finish. Zerk fitting makes maintenance easier.


Resist rust and corrosion.


Conform to your lake bottom. Can also be removed in shallow water.

OVERSIZED PULLEYS

Design and Nylatron® material are gentle on cable for longer life.

61" OF LIFT HEIGHT

Enables the boat to be cranked way out of the water in case of:• waterfluctuation • highwaves • storms

LSV1364SEE PAGES 2–3 for a complete list


way outthis is

The sun’s up, the temperature rises and it’s a beautiful day.

But when the water rises, you want your boat to be safe. The LSV1364 will lift your boat way out of the water, keeping it safe, even when you are away.

ACC

ESSORIES

EXTENSION DIRECT DRIVE LEGS ELECTRIC MOTOR CANOPY



13

NEW! CANOPY

To cover and protect your PWC.

high & dryWhen the water levels rise,

and other boats are floating away,

your boat will be high and dry.

LSP


15

ExCLUSIVE PULLEY BAR DESIGN

One piece design works better than independent pulleys, results in longer cable life, and shields your boat from any contact with the cable.

HEAVY DUTY WINCH

We oversize all of our winches for extra safety and easy cranking. Durable zinc plating resists rust better than a painted winch.

25" ALUMINUM WHEEL

Easy to use, powder coated in our signature red for a durable long lasting finish.


Come standard on all of our Personal Watercraft Lifts. Longer length legs are available for deep water. Legs can be removed for shallow water.

WELDED BUSHINGS

Provide extra reinforcement at pivot points, unlike drilled holes that can wear out.

NEW! CANOPY

To cover and protect your PWC.

MODELS TO FIT ANYTHING FROM A SMALL STAND-UP TO THE 3-PERSON, 4-STROKE UNITS

PWC LIFTS : CANTILEVER

LSC1264SEE PAGES 2–3 for a complete list


flexibilityWork days are made up of schedules and deadlines. Summer days should be more flexible.

Our PWC Lifts are not only for Personal Watercraft, but they also have the flexibility to be used with small fishing boats, sailboats, paddle boats, canoes and kayaks.

We set the standard. Our lifts feature a distinctive design that is engineered for strength and dependability.

increase your

ACC

ESSO

RIES

EXTENSION DIRECT DRIVE LEGS ELECTRIC MOTOR CANOPY

For 2 cycle & 2 passenger or 4 cycle Personal Watercraft. Also great for

paddle boats and small sailboats!

LSC850



LSC850D

Double lift saves valuable dock space.

pwc lifts aren't just for

pwc's anymoreWith three models to choose from, LSP has a PWC Lift for a full range of small boats

as well as all sizes of PWC’s.

LSP LSP


17

CANOPY HAMMOCK

Provides lots of room to store skis, wake boards, life vests, tubes, toys, etc. Made of durable black mesh. Extremely easy installation.

Fits under our 108" or 120" wide canopies.

CANVAS COLORS

STANDARD COLORS:

BL GY TN

CUSTOM COLORS:

GREEN WHITE

Canopy fabric is durable Shelter-Rite®18 oz.

vinyl coated polyester. Made in the USA.

SPECIAL SIZES and CUSTOM CURTAINS

are available.

enjoyyour pontoon boat more

Don't want a lift, but hate the hassle of the mooring cover.

This is the fastest, easiest way to get onto the water so you can enjoy

your boat more.

You can also use your pontoon boat as a patio extension

to your dock.

Sunlight deteriorates vinyl seats. Water rots wood.

Our canopy will protect your boat against both of these evils,

keeping it looking good and therefore worth more

at trade-in.

protectyour investment

CANOPIES : VERTICALPROTECT YOUR INVESTMENT AND ENJOY USING YOUR BOAT MORE PROTECT AND COVER YOUR PONTOON BOAT WHEN NO LIFT IS NEEDED OR WANTED

CANOPIES : FREESTANDING

HEAVY VINYL COVERS

Strong 18 oz. vinyl coated polyester, made in the USA. Standard in Blue, Gray, and Tan with a scalloped edge.

REINFORCED STRUCTURE

Four diagonal braces for extra strength and rigidity. These can be placed in different configurations to allow easy access to your pontoon boat.

SECURELY ANCHORED

Augers securely anchor the canopy at four or six points so it stays put.

10' Steel Poles

24AF120FSSEE PAGES 2–3 for a complete list


24AF120BSEE PAGES 2–3 for a complete list


HEAVY VINYL COVERS

Shelter-Rite® 18 oz. vinyl coated polyester, made in the USA. Standard in Blue, Gray, and Tan with a scalloped edge.

ALUMINUM STRUCTURE

Incredibly light weight, yet strong. Repairable if damaged by storms.


Standard legs are 5'. 6' and 7' legs are available for boats with ski towers.

tel: 517.639.3815 | www.lakeshoreproducts.com

LSP

19

The Pine Boardwalk has all the rustic appeal of wood with the advantages of an anodized aluminum structure: lighter weight, stronger, longer lasting, and reduced warping. Treated Premium Southern Yellow Pine will look good for years to come and has no visible screw heads.

175 lbs*

The Cedar Boardwalk has all the same features as the Pine Boardwalk, with the added benefit of greatly reduced weight.

130 lbs*

Open grating makes our Vinyl Dock cooler and lighter than solid vinyl. The anodized aluminum sides and a welded aluminum under structure gives strength and durability to this modern dock. Available in white, grey or tan.

110 lbs*

FOUR STYLES TO CHOOSE FROM – THE CHOICE IS YOURS

DOCK

2 Docks2 Support Assemblies (Hidden or Standard)

STRAIGHT

4 Docks1 Support Assembly2 Trusses w/posts1 Dock to Platform Connector

PLATFORM

3 Docks3 Support Assemblies1 T & L Adapter

TYPICAL T

3 Docks3 Support Assemblies1 90° Crossarm w/posts or 1 leg hidden support

TYPICAL L

4 Docks4 Support Assemblies2 90° Crossarm w/posts or 1 leg hidden support

TYPICAL U

Docks can be arranged in almost any configuration that you can imagine. LSP has a full range of special components available to make layouts easier to design and build. Talk to your dealer about the design that is right for you.

DO

CK

CO

NFI

GU

RATI

ON

S

18

* ap

prox

imat

e dr

y w

eigh

t of 4

' x 1

0' s

ectio

n

ANODIZED ALUMINUM

Maintenance free and stays cooler than plastic or wood.An investment that lasts for generations.

NON-SLIP SURFACE

Ribbed extrusion provides a safe surface but won't tear clothing or feet.

GAP FREE

Decking is close together to provide safety for fingers and toes.

ExTRA STRENGTH

Wider bottom rib provides extra strength.

cool dock90 lbs 4' x 10' section60 lbs 3' x 8' section

NEW FOR 2014!

Added braces for increased

rigidity.

boardwalk pine boardwalk cedar vinyl dock

Hot weather’s fine. Hot feet... not so much.

Constructed of anodized welded aluminum, the Cool Dock stays cooler than plastic or wood.

It is extremely light weight, easy to install and built to last a lifetime. Anodized aluminum will keep its clean look, will not turn black, rust, warp, or crack and is virtually maintenance free.

Not only is it cool, but the treads are close together so your little ones won’t catch their toes between the treads.

coolyour heels … and your toes, too!

Kids Love It!

tel: 517.639.3815 | www.lakeshoreproducts.com20 21

STANDARD SUPPORTS• Willsupportanydockconfiguration.• Augersofferthemostrigidsupportandcanbeusedin

any bottom condition.• Thepostscanbeusedformooringlinesoraccessories

such as flag poles.• Bestfordeepwaterormuddybottom.• Pipeofferedin2"Aluminum,2"HDAluminum,or

2" Gatorshield™ Galvanized Steel. Allied Gatorshield™ is American made with triple layer zinc Flo-Coat® to provide four times the rust and corrosion protection of ordinary galvanized steel.

auger mud auger large bottom plate + mud auger

WELDED FOOT PAD

Large 6" x 6" pad, welded for stability.

MULTIPLE LEG OPTIONS

Works with our adjustable legs or standard 2" pipe and auger.

ADjUSTABLE LEGS

Eight sizes of legs accommodate water depths from 0" to 85". Locking design allows for infinite height adjustment.

IMPROVED RIGIDITY

Stringer brackets are extra large to eliminate flex.

ADjUSTABLE WIDTH

Accommodates docks from 32" to 51" wide.

ACCESSORY MOUNT

Open end design to accommodate accessories.

LSP

TRUSSES• Willsupportmulti-dockpatios.• Easytoinstall,lightweight.• Availablein6',8',9',12',16'.

DOCK : SUPPORTS

We recommend you place your dock 16" above the surface of the water. For Standard Supports remember to include all 4 measurements depicted to select the proper post length. The Hidden Supports are designed so that the water depth is the only measurement needed to order the correct support.

Different types of lake bottoms require different types of support. Use the diagram below to decide which Bottom Plate or Auger is right for you. In hard sand or gravel you can use either a Hidden Support or Standard Support Assembly with any type of auger or bottom plate. In mud or silt the use of Standard Support Assemblies may be necessary to allow for deep and secure augering of the posts.

small bottom plate large bottom plate post socket + auger

auger

BOTTO

M

CO

ND

ITION

S

NEW HIDDEN SUPPORTS!

Greatly simplifies dock installations.

Universal design is easy to install

and adjust.

Use this space to configure your own dock system.

POST LENGTH = h + 16" + d + a

STANDARD SUPPORTS HIDDEN SUPPORTS

16" = height above water

h = post height above dock

d = water depth

16" = height above water(water is aligned with cross brace)

d = water depth

a = auger depth

MUD / MARROW / SOFT SILTHARD SAND / GRAVEL

LSP


SPECIFICATIONS : DOCKS

POSTSAugers and Bottom Plates are not included.

length steel aluminum hd aluminum 2' 2P2S 2P2A n/a 3' 3P2S 3P2A n/a 4' 4P2S 4P2A n/a 5' 5P2S 5P2A n/a 6' 6P2S 6P2A 6P2AHD* 7' 7P2S 7P2A 7P2AHD* 8' 8P2S 8P2A 8P2AHD* 9' 9P2S 9P2A 9P2AHD* 10' 10P2S 10P2A 10P2AHD* 12' 12P2S 12P2A 12P2AHD* 16' 16P2S N/A 16P2AHD* 20' 20P2S N/A 20P2AHD*

* HD Posts use Composite Auger

CROSSARMS & DIAGONALS length steel aluminum2' Crossarm 2x2S 2x2A 3' Crossarm / Diagonal 3x2S 3x2A4' Crossarm / Diagonal 4x2S 4x2A6' HD Crossarm 6xHD1S n/a8' HD Crossarm 8xHD1S n/a9' HD Crossarm 9xHD1S n/a12' HD Crossarm 12xHD1S n/a3'3" 90° Crossarm 3390x2S 3390x2A4'3" 90° Crossarm 4390x2S 4390x2A6'3" HD 90° Crossarm 6390xHD1S n/a8'3" HD 90° Crossarm 8390xHD1S n/aLongitudinal Leg Brace SHDIAG

CROSSARM TRUSSES18" high all aluminum truss used to build patios or dock platforms.

length part number 4' xT4 6' xT6 8' xT8 9' xT9 9' 10" (use 2 for a 20' Truss) xT910 12' xT12 16' xT16 Truss Connector (connects 2 Trusses) xTC Dock to Platform Connector (2 pcs) DP Truss Stringer Bracket xTSB

STAN

DA

RD SU

PPORTS

COOL DOCK* all aluminum : page 18 width 10' long 8' long 45° corner 4' 4x10A 4x8A 4x4CA 3' 3x10A 3x8A

BOARDWALK : CEDAR* : page 18 10' long 8' long width 10' long /w center support 8' long /w center support 4' 4x10BWC 4x10BWCCS 4x8BWC 4x8BWCCS 3' 3x10BWC 3x10BWCCS 3x8BWC 3x8BWCCS

BOARDWALK : PINE* treated SYP : page 18 10' long 8' long width 10' long /w center support 8' long /w center support 4' 4x10BW 4x10BWCS 4x8BW 4x8BWCS 3' 3x10BW 3x10BWCS 3x8BW 3x8BWCS

HIDDEN SUPPORTS : page 20 water depth top assembly leg (two required) 0" to 7" SHTA14 SHLEG1 4" to 13" SHTA19 SHLEG1 10" to 25" SHTA19 SHLEG2 22" to 37" SHTA19 SHLEG3 34" to 49" SHTA19 SHLEG4 46" to 61" SHTA19 SHLEG5 58" to 73" SHTA19 SHLEG6 70" to 85" SHTA19 SHLEG7

VINYL* : page 18 width length white gray tan 4' 10' 4x10VW 4x10VG 4x10VT

DOCK BENCHES wood and width all aluminum aluminum 4' 4AB 4AWB 6' 6AB 6AWB

•boat-protectingvinyl•longerlastingthanfoam•vinylwillnotdiscolorlikefoam

POST BUMPERS black green blue white PB PBG PBB PBW

•allaluminumtomatchCoolDock•woodandaluminumtomatch

Boardwalk

PARTS

COMPOSITE AUGER AUGP•fits2"HDaluminumpipe

ALUMINUM AUGER AUG2•usedtoaugerpostintothelake bottom

SMALL BOTTOM PLATE BP•canbeusedinplaceofaugerwhenbottomishardsand

or gravel

LARGE BOTTOM PLATE LBP•canbeusedinplaceofaugerorwithaugerinsoft

conditions

MUD AUGER MAUG•usedtoaugerpostsintomudorsoftbottom

POST SOCKET SOC•givestherigidityofanaugeredpost•socketaugerspermanentlytolakebottom•standardsupportassembleslideseasilyintosocket•makesyearlyinstallationandremovalsimpleandquick

POST RATCHET PR•speedsupinstallationofpoststhatuseaugers

STRINGER BRACKET SB•attachesdocktocrossarm•holds2sectionsofdocktogether

CROSSARM CLAMP xCL•attachescrossarmtoverticalpost

TEE CONNECTOR TC2•anotherwayofmakinga“T”or“L”•strongerthanadapter,butusesanextrasupportassembly•clampsonthecrossarmofonedockandthesideofanother

DIAGONAL CLAMP DC•usedtomakesupportmorerigidindeepwater•availablein3',4'and6'lengths

part number

*weight capacity : 800 lbs per 10' section/ 1000 lbs per 8' section.

Visit our website for details on our Ten/Two Year Limited Warranty.

END CAPS length part number 3' 3EC 4' 4EC 6' 6EC 8' 8EC 12' 12EC

ADAPTERS width part number 2' 2AD 3' 3AD 4' 4AD •easilyattachestoseawall

or dock to make a "T" or "L" configuration

•dressesuptheopenend of a dock

22

ACC

ESSO

RIES

HID

DEN

SU

PPO

RTS

DO

CKS

855 East Chicago Road, Quincy, MI 49082tel: 517.639.3815 fax: 517.639.4576email: [email protected]

Please call us or visit our website to find a dealer in your area.

www.lakeshoreproducts.com

LSP inc.

© 2014 LSP, Inc. LS0159/7.5M/1014

Documents

LSP - Lakeshore Products 2014 Catalog sm spr2.pdfUnder Deck Bunk Bundle LSV30/40B LS5004BU Stainless Steel Bolt Kits all LS5010B/BP Direct Drive Motor Kit AC all MKLTA Direct Drive