Upload
roberto-brenes
View
61
Download
8
Embed Size (px)
Citation preview
LCD TV/MonitorOwner’s Manual
Welcome to the Flatpanel Revolution! Your CyberHome Flatpanel LCD TV/Monitor has a thin, small-footprint design that replaces bulky Televisions and Computer Monitors to give you more room to work or enjoy home entertainment. And Low-Radiation makes it a healthy alternative to traditional CRTs!
CH-LCTV 150
2
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR ANNOYING INTERFERENCE, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE AND ONLY USE THE RECOMMENDED ACCESSORIES.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL FOR SERVICING.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of not isolated dangerous voltage within the inside of the product that may be sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
PlacementAvoid placing the unit in areas of:� direct sunlight, heating radiators or closed
automobiles� high temperature [over 35 C (95 F)] or high
humidity (over 90%)� excessive dust� vibration, impact or where the surface is tilted,
as the internal parts may be seriously damaged
° °
Non-use periods� When the unit is not used, turn the power off.� When the unit is unused for a long period of time,
the unit should be unplugged from the household AC outlet.
No fingers or other objects inside� Touching internal parts of this unit is dangerous
and may cause serious damage to the unit. Do not attempt to disassemble the unit.
� Do not put any foreign object on the disc tray.
Keep away from water and magnets� Keep the unit away from flower vases, tubs,
sinks, etc. If liquids are spilled into the unit, serious damage could occur.
� Keep magnetic objects, such as speakers, distant from the player.
Stacking� Place the unit in a horizontal position and do
not place anything heavy on it.� Do not place the unit on amplifiers or other
equipment, which may become hot
CondensationIf moisture forms inside this unit, it may not operate properly. In this case, turn off the power and wait about one hour for the moisture to evaporate. Moisture may form in the following cases:
� immediately after a heater has been turned on
� in a steamy or very humid room� the unit is moved from a cold environment to
a warm one
� Hold the plug firmly when connecting or disconnecting the AC power cord to this unit.
� Do not connect or disconnect the AC power cord with wet hands.
� Keep the AC power cord away from heating appliances.
� Never put any heavy object on the AC power cord.
� Do not attempt to repair or reconstruct the AC power cord in any way.
� Remove dust, dirt, etc. on the plug at regular intervals.
� If the unit has been dropped or otherwise damaged, turn off the power and disconnect the AC power cord.
� If smoke, odors or noises are emitted from the unit, turn off the power and disconnect the AC power cord.
Power cord protectionTo avoid any malfunctions of the unit and to protect against electric Shock, fire or personal injury, please observe the following:
When using this DVD player, basic precautions should always be followed, including the following:
� Read these instructions
� Keep these instructions
� Heed all warnings
� Follow all instructions
� Do not use this apparatus near water
� Clean only with dry cloth
� Do not block any ventilation opening, Install in accordance with the manufacture's instructions
� Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
� Do not defect the safety purpose of the polarized plug. A polarized plug has two blades with one wider than other.
� The wide blade is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
� Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
� Only use attachments / accessories specified by the manufacturer.
� Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
� When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
� Unplug this apparatus during lightning storms or when unused for long periods of time.
� Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
SAVE THESE INSTRUCTIONS
Important Safety Precautions
General InformationSafety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Controls and FunctionsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Top Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Bottom Connector Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote ControlPreparing and Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Remote Control Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Watching TVTelevision Setup and Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
FM RadioFM Radio Setup and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using External Video EquipmentComposite Video Inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
S-Video & Component Video Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
VGA Monitor Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Advanced FunctionsUsing the Clock and Timer Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Changing SettingsUsing the On-Screen Setup Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
On-Screen Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Further InformationSpecifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Table of Contents
3
*Specifications are subject to change without notice. *All trademarks, logos, brand names and company names are the property of their respective owners.
Welcome to the LCD Flatpanel Revolution! Your new LCD TV/Monitor has a thin, small-footprint design that replaces bulky Televisions and Computer Monitors to give you more room to work or enjoy home entertainment. And your new Flatpanel TV/Monitor is a healthier alternative to traditional TVs and Monitors, producing none of the potentially harmful electromagnetic energy of CRT tubes.
Introduction
4
POWERVOLUME CHANNEL
- +
SELECT
OSD
1 3 4 5 62
1 POWER ON/OFFPress to power the LCD TV On/Off.
2 VOLUME DOWNPress to Decrease the audio output signal or navigate Down in the On-Screen Menu.
3 VOLUME UPPress to Increase the audio output signal or navigate Up in the On-Screen Menu.
4 SELECT / OSDPress to bring up the On-Screen Menu, then to select an option.
5 CHANNEL DOWNPress to move to the Previous TV/FM channel.
6 CHANNEL UPPress to move to the Next TV/FM channel.
Front View
Top Control Panel
Features:q 15” Viewable LCD Screenq Built-In Stereo Speakersq Full-function Remote Control for Volume Adjustment, Channel and Input Selection and moreq Inputs for (2) Composite Video Sources, such as DVD Players, VCRs or Camcordersq S-Video Inputq Component Video Input via D1 Connectorq FM Radio with On-Screen Channel Selection and Setupq Headphones Jack for Private Listeningq On-Screen Setup Menu to adjust Video Options, Select Input Channel and moreq Parental Control with Password to Block Selected Channelsq Sleep Timer, Auto-Scan Channels, Flash-Back and many more Advanced Features!
5
Bottom Connector Panel
1 3 4 5 6 7
8
9 10 11
12 13 14 15
Bottom View
1 HEADPHONES JACKStereo Output for Headphones or Earphone. Sound from built-in Speakers will be muted when this jack is used.
2 DC POWER IN9 Volts DC from Built-In AC Adapter.
3 S-VIDEO IN (AV3)Connect to S-Video output of DVD Player, VCR or other video equipment. Use connections and for audio.7 8
4 VHF/UHF ANTENNA / CABLE TV INRF Input connects to Television Antenna, Cable or VCR.
5 FM ANTENNA INInput for FM Radio Antenna.
6 VGA INConnect to PC’s Video Card.
7 AUDIO IN - LEFT (AV3/VGA)Left channel Audio In for use with S-Video (AV3) and VGA Inputs.
8 AUDIO IN - RIGHT (AV3/VGA)Right channel Audio In for use with S-Video (AV3) and VGA Inputs.
9 COMPOSITE VIDEO IN (AV1)Connect to composite video output of DVD player, VCR or other video equipment. Use connections and for audio.10 11
10 AUDIO IN - LEFT (AV1)Left channel Audio In for use with Composite Video Input (AV1).
11
COMPOSITE VIDEO IN (AV2)Connect to composite video output of DVD player, VCR or other video equipment. Use connections and for audio.13 14
12
AUDIO IN - LEFT (AV2/AV4)Left channel Audio In for use with Video Inputs AV2 and AV4.
AUDIO IN - RIGHT (AV1)Right channel Audio In for use with Composite Video Input (AV1).
13
AUDIO IN - RIGHT (AV2/AV4)Right channel Audio In for use with Video Inputs AV2 and AV4.
14
2
COMPONENT VIDEO IN - (AV4)Use a special Component Video to D1 Cable to connect video equipment with component video out, such as DVD Players.
15
Operation of Remote ControlWhen using the control, please aim at the device's remote control sensor, located inside the blue triangle on the front of the LCD TV. A 30 degree angle is recommended for best operation.
R0
3 1
.5V
Installing the BatteriesIf the Remote Control only operates when you get closer to the LCD TV, it may mean the batteries are weak. Please replace the two batteries simultaneously with two new batteries (Size AAA, R03, 1.5V) of the same type. Please note the positive (+) and negative (-) polarity shown inside the battery compartment on the remote.
Important Note about Batteriesq When changing batteries, it is not recommended to use a mix of old and new batteries or batteries of
different brands simultaneously.q If the unit will not be used for an extended length of time, it’s wise to remove the batteries before storage.q The life of the batteries depends on the amount of usage. With typical use, a battery life of approximately 6
months can be expected.
1. Push down and then outwards to remove the battery compartment cover.
2. Insert Batteries following polarity marked inside compartment.
3. Slide Cover back into place.
Preparing and Using the Remote Control
Quick Tips
� Make sure no objects are between the remote and the LCD TV. � Similar remote controls
could interfere with the function of the unit.� Make sure not to store
the remote upside down or with any objects pressing on the buttons - this could drain the battery.
6
54 6
21 3
87 9 0
JUMP
SEL
OSD MENU
INPUT SELECT
POWER
SAP
DISPLAY
AUTO SCAN
AUDIO
-
CHANNEL
SLEEP
ENTER
MUTE STEREO ON/OFF
TV/CATV AV1/2 AV3/4/FM PC-VGA
VOL.
VOL.
CHCH
DEL ADD
+
CLOCK
TIMER
STEREOToggles Stereo/Mono Audio Setting.
DISPLAYTurns the On-Screen Display On/Off.
PC-VGASelects the PC-VGA or PC-VGA w/FM Radio inputs.
AV3/4/FMSelects AV3, AV4 or FM Radio inputs.
VOLUME UPIncreases audio output.
ENTERConfirms channel selection.
TIMERPress to display Timer status.
CLOCKDisplays the Clock on-screen.
SLEEPPress to setup the Sleep Timer.
+Press to move Up in the OSD Menu or Increase FM fine tuning.
POWERPress to power the unit On/Off.
MUTEPress to temporarily silence audio.
SAPSelects Secondary Audio Program.
TV/CATVSelects TV or CATV video inputs.
AV1/2Selects AV1 or AV2 video inputs.
CHANNEL DOWNPrevious FM / TV channel.
JUMPFlashback to last FM / TV channel.
NUMBER KEYSUse to select a TV or FM channel.
SELPress to bring up the On-Screen
Menu, then to select an option.
Understanding the Buttons on the Remote The Remote Control provides convenient access to the LCD TV’s Input Selections, Channel Switching and Advanced Functions, such as Auto-Scanning and using the On-Screen Setup Menu.
Remote Control Functions
7
CHANNEL NEXTMove to the Next FM / TV channel.
-Press to move Down in the OSD
Menu or Decrease FM fine tuning.
AUTO SCANBegins channel Auto-Scan.
VOLUME DOWNDecreases audio output.
CHANNEL DEL/ADD Delete and Add channels to memory.
Television Setup and Functions
VHF/UHF Antenna Cable TV Connection
Wall Jack
Antenna &Cable TV In
Connecting the Antenna or Cable TV Hookup (TV/CATV)Connect a 75-ohm coaxial TV cable or 300-ohm television antenna to the TV’s input connector.
8
Select TV or CATV as the Input SourcePress the TV/CATV button on the remote to toggle between TV or Cable TV as the current Input Source.
q TV - You are using an Antenna for Inputq CATV - You are using a Cable TV Hookup
ATV/CATV
AB
Auto Scan ChannelsTo automatically scan through and add available channels, press the AUTO SCAN button. The screen will display a preview of the channels added to memory. When the scan is finished, press ENTER to save the selected channels in memory.
Note: When using the UHF/VHF Antenna (TV), 70 channels will be scanned, with those received being added. With Cable TV (CATV) selected, 125 channels will be scanned.
AUTO SCAN
B
CAdding and Deleting ChannelsTo Delete a channel, select the channel and press the DEL button. You will see the message “DELETE?” on the screen. Press the DEL button again to confirm the deletion of the channel.
To Add a channel, select the channel and press ADD. You will be prompted with a confirmation message: “Add?”. Press ADD again to add the channel to memory.
DEL
CHANNEL
ADD
C54 6
21 3
87 9 0
JUMP
SEL
OSD MENU
INPUT SELECT
POWER
SAP
DISPLAY
AUTO SCAN
AUDIO
-
CHANNEL
SLEEP
ENTER
MUTE STEREO ON/OFF
TV/CATV AV1/2 AV3/4/FM PC-VGA
VOL.
VOL.
CHCH
DEL ADD
+
CLOCK
TIMER
54 6
21 3
87 9 0
JUMP
SEL
OSD MENU
INPUT SELECT
POWER
SAP
DISPLAY
AUTO SCAN
AUDIO
-
CHANNEL
SLEEP
ENTER
MUTE STEREO ON/OFF
TV/CATV AV1/2 AV3/4/FM PC-VGA
VOL.
VOL.
CHCH
DEL ADD
+
CLOCK
TIMER
Television Setup and Functions (Cont’d)
9
Manually Selecting a ChannelYou can use the NUMBER keys to manually select a channel to view. After the number appears on-screen, press ENTER to jump to the channel.
B B
CMuting the AudioTo temporarily silence the audio output, press the MUTE button. The Mute Icon will be displayed on-screen for about 3 seconds.
A
C
JUMP
MUTE
FDisplaying Current Channel & Mute StatusPress the DISPLAY button to show the currently selected channel and the status of the MUTE button. Press DISPLAY again to clear the screen.
ON/OFF
DISPLAY
A0
0
0
0
0
0
0
0
0 0
54 6
21 3
87 9 0
Flash-Back to Previous ChannelTo quickly return to the last channel viewed, press the JUMP button. Press JUMP again to Flash-Back to the channel you started at.
DUsing SAP (Secondary Audio Program)SAP is an additional audio channel that is transmitted with some television programs. In the USA, SAP is commonly used to offer a second language such as Spanish to viewers. Press the SAP button to switch to the Secondary Audio Program.
SAP
ESelecting Stereo or Mono AudioYou can select between Stereo and Mono Audio with the STEREO button. Use the Mono setting to produce sound from both speakers for channels or audio sources that do not support Stereo.
STEREO
DFE
FM Radio Antenna
FM RadioAntenna In
Connecting the FM Radio Antenna Connect a 300-ohm FM antenna to the TV’s FM input connector.
FM Radio Setup and Functions
10
AAV3/4/FM
AB
FM 5
123456789
10
97.70105.70104.90
98.10101.30102.40107.10
94.30106.40
95.70
B CH CH
Select the FM Tuner as the Input SourcePress the AV3/4/FM button on the remote repeatedly to select the FM Tuner. The FM Preset Location List will be displayed on-screen:
Selecting FM ChannelsThe On-Screen FM Preset List features locations for 20 preset channels over 2 pages. Use the CHANNEL UP/DOWN buttons to select a preset location to listen to, edit or store a new FM frequency at. You can also directly select locations by using the NUMBER keys to input the location number and pressing ENTER.
Note: Pressing the CHANNEL UP key on location 10 will move to the next page.
54 6
21 3
87 9 0
JUMP
SEL
OSD MENU
INPUT SELECT
POWER
SAP
DISPLAY
AUTO SCAN
AUDIO
-
CHANNEL
SLEEP
ENTER
MUTE STEREO ON/OFF
TV/CATV AV1/2 AV3/4/FM PC-VGA
VOL.
VOL.
CHCH
DEL ADD
+
CLOCK
TIMER
FM Radio Setup and Functions (Cont’d)
11
A
B
FM Preset ProgrammingTo Add or Edit Preset Locations, select a location number and use the - and + keys to tune to the desired frequency. Press ENTER to save the FM frequency as a preset at the selected location.
A - +
BJUMP Flash-Back to Previous Channel
To quickly return to the last channel listened to, press the JUMP button. Press JUMP again to Flash-Back to the channel you started at.
CTurning Off the On-Screen DisplayTo clear the FM Preset List from the screen, press the DISPLAY button. Press DISPLAY again to bring the list back up.
ON/OFF
DISPLAY
C
54 6
21 3
87 9 0
JUMP
SEL
OSD MENU
INPUT SELECT
POWER
SAP
DISPLAY
AUTO SCAN
AUDIO
-
CHANNEL
SLEEP
ENTER
MUTE STEREO ON/OFF
TV/CATV AV1/2 AV3/4/FM PC-VGA
VOL.
VOL.
CHCH
DEL ADD
+
CLOCK
TIMER
CompositeVideo Out
AudioOutput (Left)
AudioOutput (Right)
INPUT SELECT
POWER
SAP
DISPLAYAUDIO
ENTER
MUTE STEREO ON/OFF
TV/CATV AV1/2 AV3/4/FM PC-VGA
VOL.
VOL.
CHCH
Camcorder (AV2)
12
AV2Composite
Video In
AudioInput (Left)
AudioInput
(Right)
Y W R
Y W R
Composite Video Inputs
CompositeVideo Out
AudioOutput (Left)
AudioOutput (Right)
AV1
Y W R
Y W R
CH-DVD 402
POWER
ONOFF
DVD Player (AV1)
AV1Composite
Video In
AudioInput (Left)
AudioInput
(Right)
Connecting Video Equipment with Composite Video Out (AV1 and AV2 Inputs)Use the AV1 and AV2 Inputs for video equipment with Composite Video output, such as VCRs, DVD Players, Camcorders, etc. The AV1 and AV2 Inputs each consist of one phono jack for Composite Video, as well as Left and Right Stereo Audio jacks.
q Connect the Composite Video from the video equipment’s output to the AV1 Input with a standard video cable. q Connect the Left and Right Stereo Audio cables.q Use the AV1/2 button on the remote to select these input channels for display on screen.
AV2
INPUT SELECT
POWER
SAP
DISPLAYAUDIO
ENTER
MUTE STEREO ON/OFF
TV/CATV AV1/2 AV3/4/FM PC-VGA
VOL.
VOL.
CHCH
S-Video Input (AV3)If the video equipment you are using supports S-Video, use a special S-Video cable to connect to the AV3 Input of the TV for improved video quality.
q Connect the S-Video output from the DVD Player, Camcorder, etc. to the AV3 Input with an S-Video cable.q Connect the Left and Right Stereo Audio cables to the L3/R3 audio inputs.q Use the AV3/4/FM button on the remote to select between the AV3, AV4 and FM inputs for display on screen.
AV3S-Video In
S-VideoOutput
AudioOutput (Left)
AudioOutput (Right)
R
W
W
R
AudioInput (Right)
AudioInput (Left)
AV3Audio In
S-Video & Component Video Inputs
13
CH-DVD 402
POWER
ONOFF
DVD Player (AV3)
INPUT SELECT
POWER
SAP
DISPLAYAUDIO
ENTER
MUTE STEREO ON/OFF
TV/CATV AV1/2 AV3/4/FM PC-VGA
VOL.
VOL.
CHCH
Component Video Input (AV4)This connection requires a special Component Video to D1 Cable. Using this cable, video equipment that supports Component Video can be connected to the AV4 input of the LCD TV.
q Using the special Component Video to D1 Cable, connect the YPbPr Component Video Outputs of the DVD Player, or other video equipment, to the AV4 D1 input connector.
q Connect the Left and Right Stereo Audio cables to the L3/R3 audio inputs.q Use the AV3/4/FM button on the remote to select between the AV3, AV4 and FM inputs for display on screen.
AV4Component
Video In
AudioOutput (Left)
AudioOutput (Right)
W
R
AudioInput (Left)
AudioInput
(Right)
W R
AV4Audio In
Component Video Out
CH-DVD 402
POWER
ONOFF
DVD Player (AV3)
Y
Pb
Pr
Y
B
R
VGA Monitor Input
14
INPUT SELECT
POWER
SAP
DISPLAYAUDIO
ENTER
MUTE STEREO ON/OFF
TV/CATV AV1/2 AV3/4/FM PC-VGA
VOL.
VOL.
CHCH
VGA Monitor Input from PC (PC-VGA)Your LCD TV/Monitor can accept a VGA connection from a PC to function as a full-featured computer display, complete with built-in Stereo Speakers. Adjust your PC’s screen resolution to 1024x768 for the best picture.
q Connect the monitor’s VGA input to the PC’s VGA video card output with a standard VGA cable. q Connect the Audio output from the PC’s Sound Card to the AV3 audio inputs. For PC’s without stereo phono
jack outputs, this connection will require a special 1/8” to Stereo Phono Jack cable. q Use the PC-VGA button on the remote to select the VGA input. You can also listen to FM Radio while using
the VGA function by pressing the PC-VGA button a second time to select VGA/FM.
VGAOutput
AudioInput (Right)
AudioInput (Left)
VGAAudio In
WR
VGAVideo In
Computer System(PC-VGA)
POWER
ONOFF
Audio Output
Using the Clock and Timer Functions
15
Displaying the Time / Setting the ClockPress the CLOCK button to display the current Time on-screen. *Select the clock’s display format as 12H or 24H in the On-Screen Setup (See Page 17).
To set the clock, press and hold the CLOCK button for a full second. Then, use the NUMBER keys to enter the current time in 24H format. As an example, to set the time to 6:00AM, enter 06-00. To set the time for 6:00PM, enter 18-00.
BAC
Program the LCD TV to Turn Itself On or Off AutomaticallyYour LCD TV is designed with many flexible options for automatic Power-On and Power-Off, including specific time programming, as well as traditional “Sleep Timer” functionality.
A CLOCK
The Timer FunctionYou can program the LCD TV to automatically turn itself On or Off by using the Timer function. Press the TIMER button repeatedly to display the current Timer Settings for On-Time and Off-Time modes.
To set the Timer, press and hold the TIMER button for a full second on the desired mode. Then, use the NUMBER Keys to enter the desired On or Off time in 24H format.
Note: Once a time value has been entered, it will be saved in memory. To quickly enable the timer at the previously entered time value, simply press the TIMER button at the Timer set screen.
B TIMER
Using the Sleep TimerThe Sleep Timer provides an easy way to make sure the unit will turn itself off after a specified period of time. To set the Sleep Timer, simply press the SLEEP button repeatedly to select a time period from 10 to 90 minutes. To disable the Sleep Timer, press the SLEEP button repeatedly until “Disabled” appears on-screen.
CSLEEP
54 6
21 3
87 9 0
JUMP
SEL
OSD MENU
INPUT SELECT
POWER
SAP
DISPLAY
AUTO SCAN
AUDIO
-
CHANNEL
SLEEP
ENTER
MUTE STEREO ON/OFF
TV/CATV AV1/2 AV3/4/FM PC-VGA
VOL.
VOL.
CHCH
DEL ADD
+
CLOCK
TIMER
16
Using the On-Screen Setup Menu
2
1
Accessing the On-Screen Setup MenuTo bring up the On-Screen Setup Menu, press the SEL key. Varying options will be accessible depending on which video source is selected. For access to all options, make sure TV/CATV is selected as the video input.
1
2
SEL
Navigate Using the + and - KeysPress the + and - keys to move up and down in the On-Screen Setup Menu and all sub menus. Press the SEL key to choose an option. In this example, we’ll press the - key 6 times and press SEL to select the Language Menu.
3Select an Option with the SEL KeyTo select an option and save the changes, press the SEL button. In this example, we choose Spanish for the On-Screen Setup Menu language and press SEL to confirm.
3
Adjusting Video Settings and Accessing Advanced FunctionsYour LCD TV features an On-Screen Setup Menu that allows you to adjust settings for Video and Language preferences, and gives you access to advanced features such as Parental Channel Blocking. When you change settings in the Setup Menu, they are stored even when power is turned off. If you wish to return to the factory defaults, they can be easily reset with the Memory Recall function.
- +
BrightnessHueColorSharpnessSystemLanguageInput SelectClock Mode SelectProgram PreviewTV Parental SettingMemory RecallExit
Video Menu
SEL
Contrast
ContrastBrightnessHueColorSharpnessSystem
Input SelectClock Mode SelectProgram PreviewTV Parental SettingMemory RecallExit
Video Menu
Language
EnglishFranceGermanItalian
Return
Language
Spanish
54 6
21 3
87 9 0
JUMP
SEL
OSD MENU
INPUT SELECT
POWER
SAP
DISPLAY
AUTO SCAN
AUDIO
-
CHANNEL
SLEEP
ENTER
MUTE STEREO ON/OFF
TV/CATV AV1/2 AV3/4/FM PC-VGA
VOL.
VOL.
CHCH
DEL ADD
+
CLOCK
TIMER
Changing the Appearance of the DisplayYou can adjust the LCD properties with the On-Screen Setup Menu. Use the - and + keys to move the slider bar to the left and right. Press the SEL button to save changes.
BrightnessHueColorSharpness
Video Menu
Contrast
On-Screen Menu Options
17
75
0 100
System InformationThe System option displays the System Type: NTSC or PAL, as well as the unit’s Firmware version, which may be needed for certain support requests.
Contrast
System
System : NTSCVersion : 20658-20673
Language OptionsYou can adjust the Language of the On-Screen Setup Menu. The following choices are available:
EnglishFranceGermanItalian
Return
Language
Spanish
Clock Mode SelectUse this option to change the format of the time shown on screen when the DISPLAY button is pressed.
12-hour modeReturn
Clock Select
24-hour mode
Program PreviewYou can view multiple channels on-screen with the Program Preview feature. Select 2 x 2 to view 4 simultaneous windows, or 3 x 3 to view 9 windows. Only one window will be active at a time.
Use the - and + keys to select a window to activate. Press ENTER to select a window for full-screen viewing.
3 x x WindowsReturn
Preview
2 x 2 Windows
24 36
45 60
Memory RecallSelecting the Memory Recall function will reset the Video and Language options to factory defaults. Other options such as the Parental Settings, Input Select and Clock Mode will not be effected.
Using Parental Control
18
You Can Block Programs Based on Their Rating with Parental SettingsThe Parental Settings menu lets you control what programs can be viewed on your TV. You can accept or block rating levels from TV-Y (All Children) to TV-MA (Mature Audience). To access the Parental Settings menu, or to watch a program that is blocked due to its rating, you must enter a password when prompted.
The TV is programmed with (2) Default Passwords:
q User Password: 1111 - This password can be changed using the Change Password option.q Master Password: 3256 - This password cannot be changed. If the User Password is forgotten, use the
Master password to change it, thereby creating a new User Password.
TV-Y7: Age 7 and aboveTV-G: General AudienceTV-PG: Parental GuidanceTV-14: Age 14 and aboveTV-MA: Mature AudienceChange PasswordReturn
TV Parental Guideline Status
TV-Y: All Children UnblockedUnblockedUnblockedUnblockedUnblockedUnblockedUnblockedUnblocked
Specifications
19
LCD PanelPanel Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NEC NL 10276AC30-04W
Driver Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . a-Si TFT Active Matrix
Display Colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262144
Number of Pixels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1024x768
Pixel Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.297 (H) x 0.297 (W) mm
Response Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55mS
Luminance of White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 cd/m (Typical)
Viewing Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +/- 65 (Hor.) +45, -50 (Vert.) Degrees
AudioSpeakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5W/6Ohms x 2
ConnectorsVGA Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x1
S-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x1
Composite Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x2
Component to D1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x1
Coaxial TV Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x1
Coaxial FM Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x1
Audio Input. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x6
Power Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x1
Headphones Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x1
PowerDC Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +12V, 3A
Power Consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36W
PhysicalDimensions (W x D x H). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495mm x 180mm x 355mm
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5kg
AccessoriesUser’s Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x1
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x1
Batteries R03 1.5V (AAA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x2
Power Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC 12V/3A 36W x1
Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x1
FM Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x1
Index
antenna ................................................................8,10 safety precautions ......................................................2arrow buttons ............................................................7 sap .............................................................................9audio buttons.............................................................7 setup menu .........................................................16-19audio outputs......................................................12-14 sharpness.................................................................17auto scan...................................................................8 sleep.........................................................................15
specifications............................................................19batteries ...............................................................6,19 s-video input.............................................................13brightness................................................................17
table of contents.........................................................3cable tv......................................................................8 timer .........................................................................15clock ........................................................................17 top controls.................................................................4coaxial inputs........................................................8,10 tv ................................................................................8color ........................................................................17component video input ............................................13 vga input...................................................................14composite video input .............................................12 video inputs.........................................................12-14connectors .................................................8,10,12-14 video settings ...........................................................17contrast ...................................................................17
display button .........................................................7,9
enter button ...............................................................7
fm radio ...................................................................10
hue ..........................................................................17
index........................................................................20
jump button ...............................................................9
language settings ....................................................17
mute button ............................................................7,9
next channel button................................................4,7number buttons ......................................................7,9
parental control........................................................18password.................................................................18power button ..........................................................4,7preview....................................................................17previous channel button .........................................4,7
remote control preparing ................................................................6 buttons ...................................................................7
20