Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulatethe performance, characteristics, and functions of the described products in the independent state, and are notguarantees of the performance, characteristics, and functions of the described products as mounted in thecustomer's products or equipment. To verify symptoms and states that cannot be evaluated in an independentdevice, the customer should always evaluate and test devices mounted in the customer's products orequipment.

Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not beintended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospaceinstrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safetyequipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in caseof failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guaranteethereof. If you should intend to use our products for applications outside the standard applications of ourcustomer who is considering such use and/or outside the scope of our intended standard applications, pleaseconsult with us prior to the intended use. If there is no consultation or inquiry before the intended use, ourcustomer shall be solely responsible for the use.

52009 MS No.A1447-1/6

LV762XXX Series

Overview

The LV762XXX series is a single-chip video and sound processor IC with a built-in microcontroller that supports all of the NTSC, PAL and SECAM broadcasting systems. The IC provides fully integrated solution to rationalize the design of color TV sets, increase productivity, and reduce total costs.

Functions I2C bus control system with a built-in microcontroller VIF/SIF/Y/C/Deflection/CbCr IN Adjustment-free VIF/SIF 1Xtal multi-system that supports NTSC, PAL and SECAM broadcasting systems No VCO coil required Internal sound carrier BPF, 4-system sound carrier trap Digital AFT system

Bi-CMOS IC For NTSC/PAL/SECAM Color TVs Built-in CTV Microcontroller Video and Sound Processing ICs(VIF/SIF/Y/C/Deflection/CbCr IN)

Ordering number : ENA1447A

LV762XXX Series

No.A1447-2/6

Lineup Type No. SECAM Tone/Surround E/W Teletext ROM

LV762102F Flash 64K(P:48K,GC:16K)

LV762102C MASK 64K(P:48K,GC:16K)

LV762113F { Flash 128K(P:96K,GC:32K) LV762113C { MASK 128K(P:96K,GC:32K) LV762133F { { Flash 128K(P:96K,GC:32K) LV762133C { { MASK 128K(P:96K,GC:32K) LV762213F { { Flash 128K(P:96K,GC:32K) LV762213C { { MASK 128K(P:96K,GC:32K) LV762232F { { { Flash 64K(P:48K,GC:16K) LV762232C { { { MASK 64K(P:48K,GC:16K) LV762233F { { { Flash 128K(P:96K,GC:32K) LV762233C { { { MASK 128K(P:96K,GC:32K) LV76233N5F { { { { Flash 192K(P:140K,GC:52K)

Specifications Maximum Ratings (BIP Chip) at Ta = 25C

Parameter Symbol Conditions Ratings Unit

V62 max 6.0 V Maximum supply voltage

V4 max 6.0 V

I9 max 15 mA

I20 max 20 mA

Maximum supply current

I49 max 26.5 mA

Allowable power dissipation Pd max Ta 65C * 1.3 W Operating temperature Topr -10 to +65 C Storage temperature Tstg -55 to +150 C

* Mounted on a substrate: 230mm150mm1.6mm, glass epoxy board. Absolute Maximum Ratings (Micro-computer Chip) at Ta = 25C, VSS = 0V

Ratings Parameter Symbol Pins Conditions

min typ max Unit

Maximum supply voltege VDD max CpuVDD -0.3 +6.0 V

Input voltege VI XT1, RES -0.3 VDD+0.3 V

VO(1) XT2, FILT -0.3 VDD+0.3 V Output voltege

VO(2) CpuVDD2 -0.3 3.3V+0.3 V

Input/output voltege VIO Ports0, 1 -0.3 VDD+0.3 V

Peak output current

IOPH Ports04 to 07, 1 CMOS output For each pin.

-10 mA

Mean output current

IOMH Ports04 to 07, 1 CMOS output For each pin.

-1 mA

High level output current

Total output current

IOAH Ports04 to 07, 1 The total of all pins. -25 mA

Peak output current

IOPL Ports0, 1 For cach pin 20 mA

IOML(1) P02, P03, P06, P07 Ports1

For cach pin 1 mA Mean output current

IOML(2) P00, P01, P04, P05 For cach pin 8 mA

IOAL(1) P02, P03, P06, P07 Ports1

The total of all pins. 45 mA

Low lever output current

Toral output current

IOAL(2) P00, P01, P04, P05 The total of all pins. 16 mA

LV762XXX Series

No.A1447-3/6

Operating Conditions (BIP Chip) at Ta = 25C Parameter Symbol Conditions Ratings Unit

V62 5.0 V Recommended supply voltage

V4 5.0 V

I9 11 mA

I20 13 mA

Recommended supply current

I49 22 mA

V62 4.7 to 5.3 V Operating supply voltage range

V4 4.7 to 5.3 V

I9 9 to 13 mA

I20 11 to 15 mA

Operating supply current range

I49 20.5 to 26.5 mA

Recommended Operating Range (Micro-computer Chip) at Ta = -10C to +65C, VSS = 0V

Ratings Parameter Symbol Pins Conditions VDD [V]

min typ max Unit

Operating supply voltege

VDD CpuVDD 0.229s tCYC 200s 4.5 5.5 V

Hold voltage VHD CpuVDD RAMs and the registers data are kept in HOLD mode.

2.0 5.5 V

VIH (1) Ports0, 1, P00 port input /interrupt

4.5 to 5.5 0.3VDD +0.7

VDD V

VIH (2) Port00 Watch-dog timer

4.5 to 5.5 0.9VDD VDD V

High level input voltage

VIH (3) RES 4.5 to 5.5 0.75VDD VDD V

VIL (1) Ports0, 1, P00 port input /interrupt

4.5 to 5.5 VSS 0.1VDD+0.4

V

VIL (2) Port00 Watch-dog timer

4.5 to 5.5 VSS 0.15VDD+0.4

V

Low level input voltage

VIL (3) RES 4.5 to 5.5 VSS 0.25VDD V

tCYC (1) All functions operating 4.5 to 5.5 0.231 s Operation cycle time (*1) tCYC (2) OSD and Data slicer are not

operating 4.5 to 5.5 0.231 200 s

FmVCO1 Built-in VCO1 Oscillation System clock

4.5 to 5.5 13.0 MHz

OCKSEL = 0 12.5 MHz FmVCO1 (*2)

Built-in VCO2 oscillation OSD clock

OCKSEL = 1

4.5 to 5.5

16.6 MHz

FmRC Built-in RC oscillation 4.5 to 5.5 0.3 1.0 2.0 MHz

Oscillation frequency range

FsX'tal XT1 (P07) XT2 (P06)

At the 32.768KHz crystal Oscillating See the figure 1

4.5 to 5.5 32.768 kHz

Oscillation stabilizing time

tmsVCO after the HOLD mode Power-On

4.5 to 5.5 300 mS

(Note) FLASH-ROM erase/write temperature range : Ta = 252C (VDD = 4.5 to 5.5V) (*1) Relational expression between tCYC and oscillation frequency ;

1/1 frequency dividing : 3/FmVCO1, 1/2 frequency dividing : 6/FVCO1. (*2) OCKSEL is the selectable register for OSD clock frequency. (See the LC873200 users manual for details.)

LV762XXX Series

No.A1447-4/6

Package Dimensions unit : mm (typ) 3300

SANYO : DIP64S(600mil)

57.2

0.5

0.95

(1.01)

1.78

(4.25

)

3.85.1

max

0.51m

in

13.8

15.24

0.2

1 32

64 33

LV762XXX Series

No.A1447-5/6

Block Diagram

RF

AG

CV

IDE

OO

UT

/SV

O

EX

T-R

IN

0.1F

510

12k

+100F

V D

ET

RE

SE

TV

DD

5C

VB

SP

ED

_IN

AFT

RE

SE

TRGBFSI

XTS

EL

CP

U C

LOC

K

VD

D3

DAT

AC

LOC

KH

SV

SC

_SY

NC

SW

SAW FI

L

FM DE

TLI

MA

MP

RF

AG

C

VID

EO

SW

DC

VO

L

(2

2)

(2

3)

TON

E

900K

DE

TS

W

SW

VID

EO

AM

P

IF AG

C

TRA

P

SP

LLB

PF

VIF

AM

PS

OU

ND

DE

T

1CH

IPV

DD

DC

AD

JS

W

PAL

SW

DE

MO

FSC

(EH

T)V

ER

RA

MP

VE

RC

/D

VE

RS

EP

HO

RV

CC

HO

RO

UT

VID

EO

DE

T

VC

O

BP

FFM

AM

P

CLM

P

CP

UC

OR

EB

AS

ETI

ME

RR

OM

RA

M

OS

D

RS

TPLL

BU

SCL

OCK

CONT

ROL

TIM

ER

0A

DC

I/OP

OR

T 0

I/OP

OR

T 1

(2

1)

(2

3)

E/W

SW

1H D

L

V/Y

SW

DL

SH

AR

P

CO

LOR

CLA

MP

RG

BM

ATR

IX

EX

TR

GB

SW

CO

NTR

AS

TB

RIG

HT

DR

IVE

/OU

T-O

FF

OS

DS

WO

SD

CO

NTR

AS

T

TIN

T

SY

NC

SE

PA

FC1

HO

RC

/DH

OR

VC

O

PH

AS

ES

HIF

TER 1/25

6

AFC

2

TRA

P

(22

)(2

3 )

SE

CA

MD

EC

OD

ER

EX

T R

GB

CO

NTR

AS

TD

RIV

EO

UT-

OFF

1

EX

T-L

IN

0.1F2

INT-

V0.1F

3

27

28

29

30

31

VC

C :

5VV

CD

0.01F

BS

SG

DC

RE

ST

22k

+100F

0.01F

0.047F

0.1F

(M)

(M)

(METAL FILM)

10k

1M

100

4

+100F

VD

D

0.01FFILT

CPU VDD2

P00/INT0/SO0

P01/INT1/SI0,SB0

P02/SCK0

P13/TVPWMD

P14/SI 10, SB10

32P15/SCK10

24

+2.2F

0.033F

25

+1F

26

EX

T-V

0.1F5

MO

NI-R

6

YC

-Y

0.1F7

YC

-C(F

B IN

) 0.1F8

9

DV

D-Y

(G IN

)

1CH

IP V

DD

(3.3

V)

0.1F10

300

+100F

0.01F

20

1500pF21

OR

IN(R

IN)

0.1F11

15pF12

CB

IN(B

IN)

0.1F13

FSC

(EH

T)

AB

LA

CL

15

NC

(21

:E/W

)(2

3:E

/W)

16

VE

RO

UT

HO

R V

CC

(5V

)

17

HO

RO

UT

FBP

22

18

19

20k23

0.47F

30k0.1F

14

FM OU

T(M

ON

I-L)

+100F

64

63

VC

C :

5VIF62

38

37

36

35

34

YC

SW

AC

CB

PF

CLM

P

VX

OA

PC

1

AP

C2

VC

OD

DS

OS

D

FBP

HS

VS

BU

S

0.01F

0.022F

0.022F

39

+100F

0.01F

61

+0.33F

P05/AN5

P06/AN6/XT2

P07/AN7/XT1

CPU GND

P04/AN4

P03/INT3IRDA

P17/SCK11

P16/SO1/SI11, SB11/T1PWML

33 P11

41

40

39

P1242

60

59

58

57

56

55

45

54

53

0.47F

560 0.47F

0.47F(M)

3300pF

52

RG

B V

CC

(9.0

V)50

49

RO

UT

AU

DIO

L O

UT

AU

DIO

R O

UT

GO

UT

BO

UT

AB

L

48

43

1CHIP GND44

47

46

100k

IF IN

51

RE

S

33pF

100pF10H

68pF

33pF

5.6H

LV762XXX Series

PS No.A1447-6/6

SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from usingproducts at values that exceed, even momentarily, rated values (such as maximum ratings, operating conditionranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.products described or contained herein.SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and allsemiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures ormalfunction could give rise to accidents or events that could endanger human lives, trouble that could give riseto smoke or fire, or accidents that could cause damage to other property. When designing equipment, adoptsafety measures so that these kinds of accidents or events cannot occur. Such measures include but are notlimited to protective circuits and error prevention circuits for safe design, redundant design, and structuraldesign.

Upon using the technical information or products described herein, neither warranty nor license shall be grantedwith regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any thirdparty. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party'sintellctual property rights which has resulted from the use of the technical information and products mentionedabove.

Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteedfor volume production.

Any and all information described or contained herein are subject to change without notice due toproduct/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for theSANYO Semiconductor Co.,Ltd. product that you intend to use.

In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein arecontrolled under any of applicable local export control laws and regulations, such products may require theexport license from the authorities concerned in accordance with the above law.No part of this publication may be reproduced or transmitted in any form or by any means, electronic ormechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,without the prior written consent of SANYO Semiconductor Co.,Ltd.

This catalog provides information as of May, 2009. Specifications and information herein are subject to change without notice.