L&W MACHINESAUTER ELECTRICAL TURRET (VDI 30 / VDI 40) 3-JAW POWER CHUCK Well-balanced power chuck displays extraordinary capacity that features low vibration, low noise and low temperature-rising

Global Sales Network

Vacancies for valuable distributors / agents in certain countries are available.

L&W MACHINE TOOLS, INC.

Tel: +886-4-2201-4701 Fax: +886-4-2203-6013http://www.lw-machinetools.com E-mail: [email protected]

Factory: No. 53 Ho Tso St., Feng Yuan District, Taichung City,TaiwanExport Office: 9F-8, No. 62, Ta Ya Road, Taichung, Taiwan

2013

.01.

2000

L&WMACHINE

® FLAT BED CNC PRECISION TURNING CENTER

FB SERIES

2010

2370

4235

http://www.lw-machinetools.com 01 / 02

Swing Over Bed: 460 ~ 1600 mm.Z Axis Stroke: 810 ~ 6000 mm.X Axis Stroke: 280 ~ 830 mm.

Complete Product Lineup

FB SERIES FLAT BED CNC PRECISION TURNING CENTER

The CYCLONE FB series CNC precision turning centers are general purpose, highly cost-effective machines with large capacity, high accuracy, rigid structure with a wide choice of models.

Easy operation High stock removal rate Accuracy Unbeatable price+ + + +

BEDThe bed and stand are made of one-piece Meehanite cast iron, which is annealed treatment to eliminate internal residual stress and more stable that can be resisted to vibration due to deep cutting.

http://www.lw-machinetools.com 03 / 04FB SERIES FLAT BED CNC PRECISION TURNING CENTER

MANUAL TAILSTOCKRigidly constructed tailstock is able to facilitate making precision turning and drilling. Tailstock quill is hardened and precision ground.

FB-18 / 21 / 25 SERIES


EXTRA WIDE BEDThe extended bed and stand are made of one-piece Meehanite cast iron, featuring excellent damping coefficient for heavy duty cutting. The extra wide slide ways pitch is 450 mm. that ensures steady motion control for axes.

MANUAL TAILSTOCKThe heavy duty cast tailstock features a hardened and ground quill; it provides easy movement for precision cutting and drilling capability while maintaining high rigidity for part support.

FB-26 / 30 / 33 SERIES


SPINDLEThe spindle is powered via a 3-step gear assembly that features high torque output especially during low speed range. In combination with high efficient lubrication system, the spindle assembly is low noise, low vibration and low temperature rising.

OUTLINE DESIGNThe square / rectangular sheet metal and wide door width features extra large machining area that minimizes structural interference and optimizes workpieces’ accessibility. The cutting chips and fluid can be conveyed to the outside of machine efficiently. The sturdy machine saddle ensures high machining accuracy especially for heavy duty cutting.

VERSATILE APRON CONTROLSSpecially designed hand-wheels with simultaneous movement of both X and Z axes and adjustable resolutions available. CNC can be shifted left or right hand side

GENERAL FEATURESHEADSTOCKThe spindle and gears used in the headstock are made of CR-MO materials, which has been heat treated to Rockwell HRC-60° with a high precision ground finish.

ELECTRICAL CABINETWires, cables and all pipes inside the electrical cabinet are well organized with clear wire numbers and labels. The easy-to-maintain cabinet is fitted with standard heat exchanger to stabilize the electrical components’ performance, and to extend their service life time.

QUALITY INSPECTIONFB Series lathes are all strictly inspected by complete quality assurance procedures, including spindle temperature rising test, geometric accuracy inspection, laser backlash compensation and practical cutting test.


CONTROL SYSTEMThe FB series machines are equipped with FAGOR 8055i Controller. The powerful arithmetic capability features stable performance as well as user-friendly man-machine interface (MMI).FANUC and SIEMENS controllers are available on request.

HIGH PRESSURE COOLANT PUMPHigh pressure coolant pump stabilizes cutting accuracy, improves workpiece surface finishes and also extends turning tool’s life time.

CHIP CONVEYORHigh performance chip conveyor removes the chips as well as the cutting heat away from the working area, ensures job efficiency and stability.

TIMKEN BEARINGTimken Bearings are employed on L&W FB series machines which spindle bore is larger than 9”, featuring high accuracy, high rigidity and low vibration.

HYDRAULIC TANK Air-cooling hydraulic unit powers the hydraulic chuck and the turret with extremely high reliability.


BI-DIRECTIONAL ELECTRIC 4-WAY TOOL POSTThe unique turret can tolerate heavy cutting and maintain indexing repeatability of 0.003 mm. The turret will automatically change tools while using the CNC control features to adjust the spindle speed to match the tool.

8-POSITION HYDRAULIC TURRETHigh efficiency high power hydraulic turret features accurate performance with long term stability.

SAUTER ELECTRICAL TURRET (VDI 30 / VDI 40)

3-JAW POWER CHUCKWell-balanced power chuck displays extraordinary capacity that features low vibration, low noise and low temperature-rising.

4-JAW INDEPENDENT CHUCK The 4-jaw independent chuck is suitable for holding various irregular shaped working pieces. Each jaw as adjusted independently. The 4 jaws can be reversed to grip the inside or outside of the working piece. Chuck diameter is available for each FB model.

3-JAW SCROLL CHUCK (FRONT AND REAR)The 3-jaws move in and out together for quick clamping a working piece. Chuck diameter is available for each FB model

STEADY RESTThe steady rest is applied for supporting a long working piece, to prevent the working piece from springing or bending. Jaws are adjustable to hold the working piece in the correct position.

OPTIONS


FOLLOW RESTThe follow rest is mounted to the saddle and moving together with it in order to prevent the working piece springing away from the point of cutting tool.

OIL COOLER

Power Charts of Servo MotorsPower Charts of Inverter Motors

http://www.lw-machinetools.com 11 /12FB SERIES FLAT BED CNC PRECISION TURNING CENTER

0Nm

400Nm

800Nm

1200Nm

1600Nm

2000Nm

2400Nm

200

RPM

400

RPM

600

RPM

800

RPM

1000

RPM

1200

RPM

1400

RPM

1600

RPM

1800

RPM

2000

RPM

2200

RPM

2400

RPM

2600

RPM

2800

RPM

2 Kw

4 Kw

6 Kw

8 Kw

10 Kw

12 Kw2500Nm

S1

S6

S6

S1

0Nm

400Nm

800Nm

1200Nm

1600Nm

2000Nm

2400Nm

200

RPM

400

RPM

600

RPM

800

RPM

1000

RPM

1200

RPM

1400

RPM

1600

RPM

1800

RPM

2000

RPM

2200

RPM

2400

RPM

2 Kw

4 Kw

6 Kw

8 Kw

10 Kw

12 Kw

2800Nm

3200Nm

3600Nm

4000Nm

14 Kw

16 KwS6

FB-21 / 25 / 26 SeriesSpindle Bore 85 mm, Motor: FM7-A110 70 Nm 11/15.5 Kw

FB-18 Series (3100 rpm)Spindle Bore 56 mm, Motor: 7.5HP

FB-21 / 25 / 26 Series (2250 rpm)Spindle Bore 85 mm, Motor: 15HP

FB-21 / 25 / 26 / 30 / 33 Series (1500 rpm)Spindle Bore 105 mm, Motor: 15HP

FB-25 / 26 / 30 / 33 Series (800 rpm)Spindle Bore 155 mm, Motor: 20HP

FB-21 / 25 / 26 / 30 / 33 Series (1500 rpm)Spindle Bore 105 mm, Motor: 20HP

Torque NmPower

FB-18 SeriesSpindle Bore 56 mm, Motor: FM7-A075 47.7 Nm 7.5/11 Kw

FB-25 / 26 / 30 / 33 SeriesSpindle Bore 155 mm, Motor: FM7-A150 95.5 Nm 15/22 Kw

FB-21 / 25 / 26 / 30 / 33 SeriesSpindle Bore 105 mm, Motor: FM7-A150 95.5 Nm 15/22 Kw

S6

S1

S1

0 Nm

400 Nm

800 Nm

1200 Nm

1600 Nm

2000 Nm

2400 Nm

100

RPM

200

RPM

300

RPM

400

RPM

500

RPM

600

RPM

700

RPM

800

RPM

900

RPM

1000

RPM

1100

RPM

1200

RPM

2 Kw

4 Kw

6 Kw

8 Kw

10 Kw

12 Kw

2800 Nm

3200 Nm

3600 Nm

4000 Nm

4400 Nm

4800 Nm

5200 Nm

5600 Nm

14 Kw

16 Kw

18 Kw

22 Kw

24 Kw

6000 Nm

6400

1300

RPM

1400

RPM

1500

RPM

6800 Nm

Nm

7200 Nm

7600 Nm7800 Nm

S6

S1

0 Nm

800 Nm

1600 Nm

2400 Nm

3200 Nm

4000 Nm

4800 Nm

50 R

PM

100

RPM

150

RPM

200

RPM

250

RPM

300

RPM

350

RPM

400

RPM

450

RPM

500

RPM

550

RPM

600

RPM

2 Kw

4 Kw

6 Kw

8 Kw

10 Kw

12 Kw

5600 Nm

6400 Nm

7200 Nm

8000 Nm

8800 Nm

9600 Nm

14 Kw

16 Kw

18 Kw

22 Kw

24 Kw

S6

S1

650

RPM

700

RPM

750

RPM

800

RPM

10400 Nm

11200 Nm

12000 Nm

12800 Nm

13600 Nm

S6

S1

0 Nm200

93RPM20100 1100

330RPM1000900800300 500 600 700400 1500140013001200

1500RPMRPM

L檔 M檔 H檔

3HP

6HP

9HP

12HP

15HP

400 Nm

800 Nm

1200 Nm

1600 Nm

2000 Nm

RPM

200 Nm

600 Nm

1000 Nm

1400 Nm

1800 Nm

2200 Nm

37.094 10.453 2.2906

190010027RPM 126RPM

2000Nm

1100490RPM

400 700600500300 800 900 1000 1200 1300 1400 1500 1600 1700 18002250RPM

2000 2100 2200 2300 2400 2500 RPM

L檔 M檔 H檔

3HP6HP9HP12HP15HP

200Nm

300Nm

500Nm

600Nm

700Nm

100Nm

400Nm

800Nm

900Nm

1000Nm

1100Nm

1200Nm

1300Nm

23.55 5.939 1.3

1900153RPM33RPM

2001000Nm680RPM

1100900 1000800700500 600300 400 1300 1400 1500 1600 1700 180012003100RPM

27002100 2200 2300 2400 2500 26002000 31002900 30002800

3HP

6HP

RPM3200

L檔 M檔 H檔

1HP2HP

4HP5HP

7HP7.5HP

100Nm

200Nm

300Nm

400Nm

500Nm

600Nm

700Nm

24.32 5.44 1.19

0 Nm 20053RPM10RPM100 800300 500 600 700400

176RPM 800RPMRPM

4HP

8HP

12HP

16HP

20HP

L檔 M檔 H檔

500 Nm

1000 Nm

1500 Nm

2000 Nm

2500 Nm

3000 Nm

3500 Nm

4000 Nm

4500 Nm

5000 Nm

5500 Nm

6000 Nm

6500 Nm

68.78 20.67 4.525

0Nm200

93RPM20100 1100

331RPM1000900800300 500 600 700400 1500140013001200

1500RPMRPM

L檔 M檔 H檔

4HP

8HP

12HP

16HP

20HP

400Nm

800Nm

1200Nm

1600Nm

2000Nm

RPM

2400Nm

2800Nm

200Nm

600Nm

1000Nm

1400Nm

1800Nm

2200Nm

2600Nm

3000Nm

3200Nm

3400Nm

37.094 10.453 2.2906

Max. allowable weight of working piece

FB-18 series

FB-21 series

MODEL

56 mm

85 mm

105 mm

85 mm

105 mm

155 mm

105 mm

155 mm

105 mm

155 mm

105 mm

155 mm

230 mm

305 mm

Spindle Bore

570

1000

1500

1000

1500

1500

2000

2000

2000

2000

2000

2000

2500

3000

Between center (kgs)

700

1500

2000

1500

2000

2000

2500

2500

2500

2500

2500

2500

3000

3500

With Steady rest (kgs)

SPECIFICATIONS:

TRAVEL

WORKING CAPACITYSwing over bedCenter heightSwing over cross slideDistance between centerWidth of bedHEADSTOCK

Spindle speed

Spindle noseSpindle boreSADDLELongitudinal travel (Z axis)Cross slide travel (X axis)TAILSTOCKQuill travelTaperMOTORSpindle motorBallscrew (Dia. x Pitch)Z axis servomotorX axis servomotorCoolant pump motorX, Z FEEDZ axis rapid travelX axis rapid travelMachine weight (approx.)

Description / Model

460 mm230 mm230 mm1500 mm350 mm

H: 3100~681 rpmM: 680~153 rpmL: 152~33 rpm

D1-656 mm

1310 mm280 mm

170 mmMT#5

AC 7.5 HP or 10 HP (opt.)X: 25 x 5 mm Z: 40 x 10 mm

6.3 NM6.3 NM1/6 HP

7 m/min5 m/min3200 kgs

1000 mm

810 mm

2900 kgs

2000 mm

1810 mm

3500 kgs

540 mm270 mm310 mm1500 mm350 mm

1310 mm350 mm

170 mmMT#5

AC 10 HP or 15 HP (opt.)X: 25 x 5 mm Z: 40 x 10 mm

6.3 NM6.3 NM1/6 HP


1000 mm

810 mm

3100 kgs

2000 mm

1810 mm

3700 kgs

630 mm315 mm400 mm1500 mm350 mm

1310 mm350 mm

170 mmMT#5

AC 10 HP or 15 HP (opt.)X: 25 x 5 mm Z: 40 x 10 mm

6.3 NM6.3 NM1/6 HP


1000 mm

810 mm

3200 kgs

2000 mm

1810 mm

3800 kgs

FB-1840 FB-1860 FB-1880 FB-2140 FB-2160 FB-2180 FB-2540 FB-2560 FB-2580

FB-25 series

FB-26 series

FB-30 series

FB-33 series

FB-18 / 21 / 25 Series

Optional Accessories1. Fanuc / Siemens CNC control2. Oil cooler for spindle 3. Manual chuck / hydraulic chuck4. Steady rest / Follow rest5. High pressure coolant pump6. Manual / Electrical tool post 7. Hydraulic turret 8. Hydraulic tailstock9. Live center 10. Chip conveyor 11. Gap type bed


● L&W Machine Tools, Inc. reserves the right to alter any mechanical specifications without prior notice.

SPECIFICATIONS:


FB-26 / 30 / 33 Series

C

D

B

A

60(D.B.C.:1600mm)

80(D.B.C.:2100mm)

100(D.B.C.:3100mm)

3735

4235

5235

1915

2370

3052

2000 2010

A B C D

160(D.B.C.:4100mm)

6235 4050

2010

2010

2010

2000

2000

2000

200(D.B.C.:5100mm)

7235 5050 20102000

40(D.B.C.:1000mm)

60(D.B.C.:1500mm)

80(D.B.C.:2000mm)

2467

2967

3467

960

1430

1680

1600

1600

1600

1757

1757

1757

A B C D

AB C

D

H: 2250~491 rpmM: 490~126 rpmL: 125~27 rpm

D1-885 mm

H: 1500~331 rpmM: 330~93 rpmL: 92~20 rpm

A1-11105 mm (opt.)

H: 2250~491 rpmM: 490~126 rpmL: 125~27 rpm

D1-885 mm

H: 800~176 rpmM: 175~53 rpmL: 52~10 rpm

A2-11155 mm (opt.)

H: 1500~331 rpmM: 330~93 rpmL: 92~20 rpm

A1-11105 mm (opt.)

H: 800~176 rpmM: 175~53 rpmL: 52~10 rpm

A2-11155 mm (opt.)

H: 1500~331 rpmM: 330~93 rpmL: 92~20 rpm

A1-11105 mm (opt.)

H: 800~176 rpmM: 175~53 rpmL: 52~10 rpm

A2-11155 mm (opt.)

H: 1500~331 rpmM: 330~93 rpmL: 92~20 rpm

A1-11105 mm

TRAVEL

WORKING CAPACITYSwing over bedCenter heightSwing over cross slideDistance between centerWidth of bedHEADSTOCK

Spindle speed

Spindle noseSpindle boreSADDLELongitudinal travel (Z axis)Cross slide travel (X axis)TAILSTOCKQuill travelTaperMOTORSpindle motor

Ballscrew (Dia. x Pitch)

Z axis servomotorX axis servomotorCoolant pump motorX, Z FEEDZ axis rapid travelX axis rapid travelMachine weight (approx.)

Description / Model

2100 mm

2000 mm

4600 kgs

5100 mm

5000 mm

7600 kgs

4100 mm

4000 mm

6600 kgs

FB-26200

670 mm335 mm400 mm

3100 mm450 mm

3000 mm450 mm

220 mmMT#5

AC 15 HP or 20 HP (opt.)X : 28 x 5 mm

Z: 50 x 10 mm for FB-2660/FB-2680/FB-26120 Z: 63 x 12 mm for FB-26160 / FB-26200

11.6 NM6.3 NM1/4 HP


1600 mm

1500 mm

4100 kgs

FB-2660 FB-26160FB-26120FB-2680

770 mm385 mm500 mm

3100 mm450 mm

3000 mm450 mm

220 mmMT#5



11.6 NM6.3 NM1/4 HP


2100 mm

2000 mm

4800 kgs

4100 mm

4000 mm

6800 kgs

5100 mm

5000 mm

7800 kgs

FB-30200

1600 mm

1500 mm

4300 kgs

FB-3060 FB-30160FB-30120FB-3080

840 mm420 mm570 mm3100 mm450 mm

3000 mm450 mm

220 mmMT#5



11.6 NM6.3 NM1/4 HP


2100 mm

2000 mm

5000 kgs

4100 mm

4000 mm

7000 kgs

5100 mm

5000 mm

8000 kgs

FB-33200

1600 mm

1500 mm

4500 kgs

FB-3360 FB-33160FB-33120FB-3380

H: 2250~491 rpmM: 490~126 rpmL: 125~27 rpm

D1-885 mm

H: 350~87 rpmM: 86~26 rpmL: 25~5 rpm

A2-20305 mm (opt.)

H: 450~108 rpmM: 107~31 rpm

L: 30~6 rpmA2-15

230 mm (opt.)

H: 1500~331 rpmM: 330~93 rpmL: 92~20 rpm

A1-11105 mm

H: 800~176 rpmM: 175~53 rpmL: 52~10 rpm

A2-11155 mm (opt.)

Standard Accessories1. Fagor 8055i CNC control2. Fully enclosure splash guard for distance between centers:1000/1500/2000/3000mm Semi-splash guard for distance between centers: 4000 / 5000 mm3. Automatic lubrication system4. Coolant system5. Work light6. Tool kits


FB-42 / 50 / 51 / 63 SERIES

FB SERIES EXTRA LARGE SPINDLE BORE & HEAVY DUTY FLOOR TYPE TURNING CENTER

GENERAL FEATURES

ELECTRICAL CABINET Electrical cabinet is designed with safety in mind. Easy to maintain and install. The 24V protecting voltage will not harm the operator if receiving a shock.

HIGH RIGID BEDThe bed and stand are made of one piece Meehanite cast iron which has annealed treatment to eliminate internal residual stress allows for more stability. Resists vibration during cutting.

TAILSTOCKRigidly constructed tailstock is able to facilitate making precision turning and drilling. Tailstock quill is hardened and precision ground.

Steady rest (90 ~ 350mm) Steady rest (300 ~ 600mm)

V8 Hydraulic turret

H4 Electrical Tool Post

Working piece supporter (340 ~ 600mm)

OPTIONS

Power Charts of Inverter Motors

FB-42/50 (6”) Motor: FM7 A220 22KWS6=215.8 Nm 33KW, S1=140Nm 22kw

FB-51/63 (6”) Motor: FM7 B280S6=412Nm 42kw, S1=267Nm 28kw

FB-51/63 (6”) Motor: FM7 B220S6=323.7Nm 33kw, S1=210Nm 22kw

FB-51 Dimensional drawing

UNIT: mm

2225

1070(A)900

880

2230

MODEL

FB-5160

FB-5180

FB-51120

FB-51160

FB-51200

FB-51240

A B

5440

5940

6940

7940

8940

9940

4440

4940

5940

6940

7940

8940

(B)

1270

700

UNIT: mm

2195

2200

(A)

(B)900

1100

2245

1500

633

4293

4793

5793

6793

7793

8793

3925

4425

5425

6425

7425

8425

(A) (B)

FB-42&50/60

MODEL

FB-42&50/120

FB-42&50/80

FB-42&50/160

FB-42&50/200

FB-42&50/240

1270

FB-42/50 Dimensional drawing

2370

1070(A)

900880

2576

MODEL

FB-6360

FB-6380

FB-63120

FB-63160

FB-63200

FB-63240

A B

UNIT: mm

5440

5940

6940

7940

8940

9940

4440

4940

5940

6940

7940

8940

(B)

1270

700

FB-63 Dimensional drawing

FB-42~63 seriesExtra Large Spindle Bore & Heavy Duty Floor Type Turning Center

http://www.lw-machinetools.com 17 / 18FB SERIES EXTRA LARGE SPINDLE BORE & HEAVY DUTY FLOOR TYPE TURNING CENTER

Optional Accessories1. Fanuc / Siemens CNC controller2. Large spindle bore3. 3-Jaw Manual / Hydraulic chuck4. 4-Jaw Manual chuck5. Manual 4 way tool post6. Electric servo tool post H47. Hydraulic turret 8. Steady / Follow rest 9. C axis & power turret

Standard Accessories1. Fagor 8055i FL TC Controller2. Half splash guard3. Chip conveyor4. Hydraulic tailstock5. Spindle oil cooler6. Air condition in power cabinet7. Lubrication system8. Center sleeve & center9. Work light 10. Leveling bolts and pads

Max. allowable weight of working piece

FB-51/63

MODEL Spindle Bore Chuck + Tailstock Chuck + Tailstock steady rest

155 mm

230 mm

255 mm

305 mm

155 mm

255 mm

305 mm

306 mm

360 mm

4000

4500

4500

5000

5000

5500

5500

6000

6000

5000

5500

5500

6000

6000

6500

6500

7000

7000

FB-42/50

http://www.lw-machinetools.com 19 /20FB SERIES EXTRA LARGE SPINDLE BORE & HEAVY DUTY FLOOR TYPE TURNING CENTER

SPECIFICATIONS:

TRAVEL

Description / Model


WORKING CAPACITYSwing over bedSwing over cross slideDistance between centerSuitable 3-jaw hyd. chuck (Opt.)Hole through with hyd. chuckMax. work piece weight (with tailstock)Bed widthTRAVELX axisZ axisSPINDLESpindle holeSpindle nose

Speed range

Suitable 3-jaw scroll chuck size (Opt.)Servo motorTURRET (Opt.)Number of tool stations Tool allowanceTool shank (Ø)TURRET (Opt.)Number of tool stations Tool allowanceFEED RATEX axis rapid traverseZ axis rapid traverseFEED MOTORSX axis powerZ axis powerBALL SCREWX axis Z axisTAILSTOCKQuill strokeQuill diameterQuill inside taperCOOLANTPump motorPump capacityPump pressureLUBRICATIONPump motorPump capacityWEIGHTNet weight

FB-4260 FB-4280 FB-42120 FB-42160 FB-42200 FB-42240

1070 mm744 mm

18”117.5 mm4000 kg610 mm

580 mm

400 / 500 / 625 mm22 / 33 KW

832 x 32 mm

Ø50 mm

440 x 40 mm

5 M/min5 M/min

17.3 Nm33.6 Nm

Ø 40 x P8Ø 80 X P16

300 mmØ 165 mm

MT 6

0.96 (50Hz) / 1.34 (60Hz)Min. 35 / Max. 130

4.3 (50Hz) / 6 (60Hz)

12 W6 CC/Time

6200 mm

6000 mm

5200 mm

5000 mm

4200 mm

4000 mm

3200 mm

3000 mm

2200 mm

2000 mm

230 mm (Opt)A2-15

H: 111~560M: 21~110

L: 4~20

1700 mm

1500 mm

155 mmA2-11

H: 151~750M: 31~150

L: 6~30

17200 kg15600 kg14000 kg12400 kg10800 kg10000 kg

6 M/min 4 M/min

FB-5060 FB-5080 FB-50120 FB-50160 FB-50200 FB-50240

1270 mm944 mm

18”117.5 mm4000 kg610 mm

680 mm

400 / 500 / 625 mm22 / 33 KW

832 x 32 mm

Ø50 mm

440 x 40 mm

5 M/min5 M/min

17.3 Nm33.6 Nm

Ø 40 x P8Ø 80 X P16

300 mmØ 165 mm

MT 6

0.96 (50Hz) / 1.34 (60Hz)Min. 35 / Max. 130

4.3 (50Hz) / 6 (60Hz)

12 W6 CC/Time

6200 mm

6000 mm

5200 mm

5000 mm

4200 mm

4000 mm

410 mm (Opt)A2-28

H: 43~215M: 9~42L: 1~8

3200 mm

3000 mm

305 mm (Opt)A2-20

H: 54~270M: 11~53L: 2~10

2200 mm

2000 mm

230 mm (Opt)A2-15

H: 111~560M: 21~110

L: 4~20

1700 mm

1500 mm

155 mmA2-11

H: 151~750M: 31~150

L: 6~30

17800 kg16200 kg14600 kg13000 kg11400 kg10600 kg

6 M/min 4 M/min

http://www.lw-machinetools.com 21 / 22FB SERIES EXTRA LARGE SPINDLE BORE & HEAVY DUTY FLOOR TYPE TURNING CENTER

SPECIFICATIONS:

TRAVEL

Description / Model


WORKING CAPACITYSwing over bedSwing over cross slideDistance between centerSuitable 3-jaw hyd. chuck (Opt.)Hole through with hyd. chuckMax. work piece weight (with tailstock)Bed widthTRAVELX axisZ axisSPINDLESpindle holeSpindle nose

Speed range

Suitable 3-jaw scroll chuck size (Opt.)Servo motorTURRET (Opt.)Number of tool stations Tool allowanceTool shank (Ø)TURRET (Opt.)Number of tool stations Tool allowanceFEED RATEX axis rapid traverseZ axis rapid traverseFEED MOTORSX axis powerZ axis powerBALL SCREWX axis Z axisTAILSTOCKQuill strokeQuill diameterQuill inside taperCOOLANTPump motorPump capacityPump pressureLUBRICATIONPump motorPump capacityWEIGHTNet weight

FB-5160 FB-5180 FB-51120 FB-51160 FB-51200 FB-51240

1300 mm900 mm

18”117.5 mm5000 kg770 mm

680 mm

400 / 500 / 625 mm22 / 33 KW

832 x 32 mm

Ø50 mm

440 x 40 mm

5 M/min5 M/min

23.5 Nm33.6 Nm

Ø 40 x P8Ø 80 X P16

300 mmØ 165 mm

MT 6

1.8 (50Hz) / 2.6 (60Hz)Min. 35 / Max. 130

6.2 (50Hz) / 8.3 (60Hz)

12 W6 CC/Time

6200 mm

6000 mm

5200 mm

5000 mm

4200 mm

4000 mm

410 mm (Opt)A2-28

H: 43~215M: 9~42L: 1~8

3200 mm

3000 mm

305 mm (Opt)A2-20

H: 54~270M: 11~53L: 2~10

2200 mm

2000 mm

230 mm (Opt)A2-15

H: 111~560M: 21~110

L: 4~20

1700 mm

1500 mm

155 mmA2-11

H: 151~750M: 31~150

L: 6~30

19200 kg17600 kg16000 kg14400 kg12800 kg12000 kg

6 M/min 4 M/min

FB-6360 FB-6380 FB-63120 FB-63160 FB-63200 FB-63240

1600 mm1200 mm

18”117.5 mm5000 kg770 mm

830 mm

400 / 500 / 625 mm22 / 33 KW

832 x 32 mm

Ø50 mm

440 x 40 mm

5 M/min5 M/min

23.5 Nm33.6 Nm

Ø 40 x P8Ø 80 X P16

300 mmØ 165 mm

MT 6

1.8 (50Hz) / 2.6 (60Hz)Min. 35 / Max. 130

6.2 (50Hz) / 8.3 (60Hz)

12 W6 CC/Time

6200 mm

6000 mm

5200 mm

5000 mm

4200 mm

4000 mm

410 mm (Opt)A2-28

H: 43~215M: 9~42L: 1~8

3200 mm

3000 mm

305 mm (Opt)A2-20

H: 54~270M: 11~53L: 2~10

2200 mm

2000 mm

230 mm (Opt)A2-15

H: 111~560M: 21~110

L: 4~20

1700 mm

1500 mm

155 mmA2-11

H: 151~750M: 31~150

L: 6~30

20200 kg18600 kg17000 kg15400 kg13800 kg13000 kg

6 M/min 4 M/min

Large spindle bores are available on request

Large spindle bores are available on request

Documents

L&W MACHINESAUTER ELECTRICAL TURRET (VDI 30 / VDI 40) 3-JAW POWER CHUCK Well-balanced power chuck displays extraordinary capacity that features low vibration, low noise and low temperature-rising