Lynch Healthcare M2 Shower Chair Range

M2 Shower chair range

telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com

1

Table of contents

SHOWER STOOLS ................................................................................................................................................... 2

M2 SHOWER/COMMODE CHAIRS .......................................................................................................................... 27

M2 SHOWER/COMMODE CHAIRS, TILT-‐IN-‐SPACE & ELECTRIC HEIGHT ADJUSTABLE .............................................. 56

ACCESSORIES FOR M2 SHOWER/COMMODE CHAIRS ............................................................................................. 74

M2 MINI SHOWER/COMMODE CHAIRS ............................................................................................................... 107

ACCESSORIES FOR M2 MINI SHOWER/COMMODE CHAIRS .................................................................................. 116

FREESTANDING TOILETPAPER HOLDER, WALLMOUNTED SEAT AND TOILET AID MODEL FRIGG ........................... 129

SPECIALMADE PRODUCTS -‐ ANYTHING IS POSSIBLE ............................................................................................. 138

BEDTABLE/ READING TABLE, METAL STOOL, SUPPORT HANDLE & BED GUARD .................................................. 150


2

Shower stools

Nielsen Line ..................................................................................................................... 3 NEPTUN Height Adjustable Shower Stool ...................................................................... 9 NEPTUN Super Soft height adjustable shower stool .................................................... 11 Adjustable shower stool ................................................................................................. 13 Adjustable shower stool with hole ................................................................................. 15 Shower stool .................................................................................................................. 17 200 kg shower stool with telescopic legs ....................................................................... 19 300kg Neptun Super Soft shower stool ......................................................................... 21 NEPTUN Supersoft Transfer shower stool .................................................................... 23 NEPTUN Small Shower Stool ....................................................................................... 25

Return to

menu


3

Nielsen Line height adjustable shower stools


4

The Nielsen Line shower stools are designed for the modern bathroom

A recess in front of the seat makes

intimate hygiene easier and ensures

that the user stays self-reliant longer.

The shower stool stands firmly in all

positions and in spite of its low weight it

can take up to 150 kg.

The backrest is designed so it is both comfortable and provides freedom of movement for the user.

The Nielsen Line shower stool is made

from 100 % rust-proof materials.

The stool is available in two widths (41

& 50 cm between the armrests) and it is

possible to buy both with or without the

backrest.

The sturdy armrests provides safety for

the user and facilitates the rising or

sitting down.

Nielsen Line

Badebænke & badetaburet


5

In the small shower area, or if you don’t need the armrests,

you can choose the small shower stool.

As standard this Nielsen Line shower stool has a seat width of 41 cm and a recess in front

of the seat for intimate wash.

It is possible to buy a foam cushion as well as a backrest for

the shower stool.


6

Accessories for Nielsen Line

Backrest for Nielsen Line

The ergonomically correct back rest provides optimal support for the back without affecting the user’s freedom

of movement.

The back rest fits all the Nielsen Line shower stools.

Backrest for Nielsen Line shower stools

Item no: 313004

Foam cushion for Nielsen Line

A comfortable foam cushion is available for both seat widths.

It provides the user extra seat comfort and it is easy to attach with four clips.

Foam cushion for Nielsen Line shower stools

Foam cushion, 41 cm. Item no: 313020 Foam cushion, 50 cm. Item no: 313021


7

Technical data Nielsen Line shower stool 41 cm.

Nielsen Line shower stool 50 cm.


8

Technical data Nielsen Line small shower stool 41 cm.

Seat and backrest Polypropylen

Telescopic legs Aluminium with rubber leg ferrules

Clips in stainless steel and polypropylene

Care Common cleaning agents (not scouring agents).

Max. 80 °C

Description Item no: Weight: ISO nr.:

Nielsen Line shower stool 41 cm. 313001 4,0 kg. 09 33 03

Nielsen Line shower stool 50 cm. 313002 4,3 kg. 09 33 03

Nielsen Line small shower stool 313003 3,3 kg. 09 33 03

Backrest 313004 0,7 kg. 09 33 03

Foam cushion, 41 cm 313020 0,1 kg. 09 33 03

Foam cushion, 50 cm 313021 0,1 kg. 09 33 03


9

NEPTUN Height Adjustable Shower Stool in stainless steel

Made in stainless steel

(Telescopic legs in aluminium).

Very comfortable seat and backrest.

Very easy to clean.

Very easy to adjust height (43-64 cm)

Backrest (=accessory) can be put on and taken off

without using tools.

The backrest can be adjusted in two depths.

The shower stool comes in two different widths

(41 and 50 cm)

⇒Air filled plastic seat, which

you can click off (for cleaning

a.s.o.). The seat is with a

nobly surface and with water

grooves.

⇐The frame is designed to

make it very easy to clean.

⇒The backrest is put on with

two clips. It can be adjusted in

two depths. The air filled

plastic part can be clicked off

(for cleaning a.s.o.)

⇐The Height is adjusted with

clips


10

Technical data and item no.: Please see back.

Technical data: NEPTUN Height Adjustable Shower Stool in stainless steel Shower Stool 41 cm Shower Stool 50 cm Backrest

Seat heights

43-64 cm 43-64 cm -

Total heights (at the armrest) 56-77 cm 56-77 cm At the top of the

backrest

79-100 cm

Width between armrests 41 cm 50 cm -

Seat size.(size of the plastic seat) W41xD36,5xH4,5 cm W41xD36,5xH4,5 cm -

App. Widths at floor 54,5-58,5 cm 60,5-64,5 cm -

App. Depths at floor 44-52 cm 44-52 cm -

Size of the plastic part of the backrest - - Width bottom

33 cm

Width top

27 cm

Height 20 cm

Depth backrest (can be adjusted in two

different depths

- - 2 cm from seat edge

and

4 cm from seat edge

Weight 4,6 kg 4,9 kg 1,3 kg

Seat/back plastic part material Polythene plastic Polythene plastic Polythene p.

Cleaning Ordinary cleaning

detergents at max. 80

degrees.

Ordinary cleaning

detergents at 80

degrees.

Same as the shower

stool

Stackable Yes Yes -

Max. User load 150 kg 150 kg 150 kg

Frame Stainless Steel.

Powder lacquered

Stainless Steel.

Powder lacquered

Stainless Steel

Powder

Lacquered

Telescopic legs Aluminium. Height

adjustable in 8 positions.

Aluminium.

Height adjustable in 8

positions.

-

Rubber feet Grey plastic. Hole in

bottom for outflow of

water.

Grey plastic. Hole in

bottom for outflow of

water

-

Description: Art. no: Neptun Height adjustable shower stool width 41 cm 312000

Neptun Height adjustable shower stool width 50 cm 312001

Neptun backrest 312020

Spare parts: Clips for height adjustment (the same one for backrest) 310065

Plastic seat for Neptun 312030

Telescopic legs (1 pc. with clips, rubber feet, bush) 312033

Rubber feet (for telescopic legs) 310017

Bush (for telescopic legs) 310021

Plastic part for backrest 312031

27.09.12


11

NEPTUN Super Soft height adjustable shower stool

This version of our famous Neptun Shower Stool is fitted

with a very soft PU foam seat and backrest

(Backrest is an accessory)

Made from stainless steel

(with telescopic legs made of aluminium)

Very easy to clean

Easily height adjustable (45-66 cm)

The backrest can be mounted or removed without the use

of tools.

The backrest is depth adjustable in two steps

The stool is available in two widths (41 and 50 cm)

Seat and back can be cleaned in disinfecting bedpan

washers

Soft PU seat that snaps on easily onto the frame.

The seat has grooves and

holes for draining excess water from the seat.

Extra soft seat for even higher

comfort.

Seat height is adjusted with

clips.

The backrest Is mounted with

clips, and adjustable in two different depths.

The foam piece on the back can be removed for

cleaning.

Technical data and item numbers: Please see back


12

Technical data: NEPTUN Super Soft, height adjustable Shower stool with an extra soft seat

Technical Detail Shower Stool 41cm Shower Stool 50 cm Backrest

Seat height 45-66 cm 45-66 cm -

Total height (upper armrest) 56-77 cm 56-77 cm Upper edge of

backrest

81-102 cm

Width between Armrests 41 cm 50 cm -

Size Foam Seat B40xD36,5xH4 cm B40xD36,5xH4 cm -

Width at the floor, approximately 61-65 cm -

Depth at the floor, approximately 43-49 cm 43-49 cm -

Measurements, backpiece – PU part - - Width lower edge

34 cm

Width upper

edge

24 cm

Height 27 cm

Adjustable Depth – Backrest - - 2 cm from edge

of seat

4 cm from edge

of seat

Weight Approx 5 kg Approx 5,9 kg Approx 1 kg

Material: Seat /backrest PU Foam PU Foam PU Foam

Maintenance Normal cleaning agents at

max. 80 ºC

Normal cleaning agents

at max. 80 ºC

Same agents as

the bench itself

Stackable Yes Yes -

Maximum userwheight 150 kg 150 kg 150 kg

Frame Stainless steel, powder

coated, white

Stainless steel, powder

coated, white

Stainless steel,

powder coated,

white

Teleskope legs Aluminium (stainless) height

adjustable, 8 levels

Aluminium (stainless)

height adjustable, 8

levels

-

Rubber feet for legs Grey plastic, with draining

hole

Grey plastic, with

draining hole

-

Description: Art. no. Neptun Super Soft height adjustable shower stool 41 cm 312002

Neptun Super Soft height adjustable shower stool 50 cm 312003

Neptun Super Soft Backrest 312021

Article: Clips for height adjustment and mounting of backrest 310065

PU foam Seat for Neptun Super Soft 800300

Teleskopic leg (1 piece with clip, rubber foot and bush) 312033

Rubber foot 310017

Bush 310021

PU foam backrest piece Neptun Super Soft 800301

27.09.12


13

Adjustable shower stool

Solid and very stable shower stool, which have

been equipped with telescopic legs.

The telescopic legs make it possible to adjust the

shower seat from 420 mm to 625 mm in height with

8 different adjustments. This can be done without

any tools.

The structure of the telescopic legs and the non-slip

rubber feet make sure the shower stool stands very

stable.

The shower stool is stackable and is prepared for

the mounting of a back rest (easily put on with the

help of 4 screws). The back is made of the same

strong materials.

You can get the adjustable shower stool in two

different widths.

⇓As acc. You can get a soft foam cushion.

It comes in two widths.



14

Technical Data: Adjustable shower stool Adjustable shower stool Adjustable shower stool Width 410 mm Width 500 mm Max. Seat height 625 mm 625 mm Min. seat height 420 mm 420 mm Max. Total height 770 mm 770 mm Min. total height 560 mm 560 mm Seat width 410 mm 500 mm Max. Width at floor 595 mm 680 mm Min. width at floor 560 mm 640 mm Seat depth 360 mm 360 mm Max. Depth at floor 520 mm 520 mm Min. depth at floor 440 mm 440 mm Weight 4,7 kg 5,0 kg Max. Load 150 kg 150 kg Surface treatment Rilsan which is a nylon coating with following

characteristics: Weatherproof, Chemically proof, Proof

against salt mist for over 2000 hours,

Physiological harmless, 220 - 250 my Slats Plastic slate 60 mm width and 6 mm thick

Rubber Feets Non slip technical grey rubber “no marks at the floor”

Hole in the rubber feet for outflow of water

Telescopic legs White lacquered aluminium tube fasten with same type

of clips as for elbow crutch

Shower stool back rest Max. Width 410 mm, height over the seat 320 mm

Mounted with 4 6 mm screws

Article: Art. No. Adjustable shower stool 500 mm 310122

Adjustable shower stool 410 mm 310120 Shower stool back rest 310180 Foam cushion. 36x37 cm (for 41 cm) 310178 Foam cushion 36x47 cm (for 50 cm) 310179 Slat middle 410 mm 310151 Slat edge 410 mm 310156 Slat middle 500 mm 310150 Slat edge 500 mm 310155 Rubber feet 310175 Screws for shower stool back 310184 Spacers for shower stool back 15/08/01 310182

27.09.12


15

Adjustable shower stool with hole

Solid and very stable shower stool with telescopic legs. Furthermore it has a hole for intimate wash.

The telescopic legs make it possible to adjust the shower seat from 420 mm to 625 mm in height with 8

different adjustments. This can be done without any tools.

The structure of the telescopic legs and the no slip rubber feet make sure the shower seat stands

very stable.

The shower stool is stackable to store and is prepared for the mounting of a back rest (easily put on with

the help of 4 screws). The back is made of the same strong materials.

The adjustable shower seat with hole for intimate wash is standard width 500 mm.



16

Technical Data: Adjustable shower stool with hole Max. Seat height 625 mm

Min. seat height 420 mm

Max. Total height 770 mm

Min. total height 560 mm

Seat width 500 mm

Max. Width at floor 680 mm

Min. width at floor 640 mm

Seat depth 360 mm

Max. Depth at floor 520 mm

Min. depth at floor 440 mm

Hole width 145 mm

Hole depth 230 mm

Weight 5,0 kg

Max. Load 150 kg

Surface treatment Rilsan which is a nylon coating with following characteristics:

Weatherproof

Chemically proof

Proof against salt mist for over 2000 hours

Physiological harmless

220 - 250 my

Slates Plastic slate 60 mm width and 6 mm thick

Rubber feet Non-slip technical grey rubber “no marks at the floor”. Hole in rubber feet for

outflow of water

Telescopic legs White lacquered aluminium tube fasten with same type of clips as for elbow crutch

Shower stool back rest Max. width 410 mm, height over the seat 320 mm


Article: Art. No. Adjustable shower stool with hole 310123

Shower stool back rest 310180

Rubber feet 310175

Screws for shower stool back rest 310184

Spacer for shower stool back rest 310182

29.09.12


17

Shower stool

A very robust and easy to clean shower stool, which

thanks to the durable nylon coating offers

outstanding durability.

The structure of the shower stool and the nonslip

rubber feet’s make sure the shower stool stands

very stable.

The shower stool is stackable and prepared for the

mounting of a back rest (easily put on with the help

of 4 screws). The back is made of the same strong

materials.

The shower stool comes in 4 different standard

sizes.

⇓As acc. You can get a soft foam cushion.

It comes in two widths.



18

0Technical Data: Shower stool H x W 47x50 47x41 52x50 52x41

Seat height 47,0 cm 47,0 cm 52,0 cm 52,0 cm

Total height 61,0 cm 61,0 cm 66.0 cm 66,0 cm

Seat width 50,0 cm 41,0 cm 50.0 cm 41.0 cm

Max. width at floor 66,5 cm 57,5 cm 66,5 cm 57,5 cm

Seat depth 36.0 cm 36,0 cm 36.0 cm 36.0 cm

Max. depth at floor 46,0 cm 46,0 cm 46.0 cm 46.0 cm

Weight 5,0 kg 4,6 kg 5,1 kg 4,7 kg

Max. Load 150 kg 150 kg 150 kg 150 kg

Surface treatment Rilsan which is a nylon coating with following characteristics:

Weatherproof

Chemically proof



220 - 250 my

Slates Plastic slate 60 mm width and 6 mm thick

Rubber feet Non slip technical grey rubber “no marks at the floor” Hole in rubber

feet for outflow of water

Shower stool back rest Max. width 410 mm, height over the seat 320 mm


Article: Art. No. Shower stool 470x500 310125

Shower stool 470x410 310126



Shower stool back rest 310180

Foam cushion 36x37 cm (for 41 cm) 310178

Foam cushion 36x47 cm (for 50 cm) 310179

Slat middle 410 mm 310151

Slat edge 410 mm 310156

Slat middle 500 mm 310150

Slat edge 500 mm 310155

Rubber feet 310175

Screws for shower stool back rest 310184

Spacer for shower stool back rest 310182

27.09.12


19

200 kg shower stool with telescopic legs

Shower stool made for large individuals and users

that require additional space.

The 70 cm seat width makes it big enough to

accommodate all sizes of persons comfortably.

It has been specially designed to withstand a max.

load of 200 kg.

The height of the stainless steel telescoping legs is

adjustable with three seat heights: 47, 50 and 53

cm.

You can easily adjust the height using cross clips

without any tools at all.

The seat can be inclined at an angle using the

telescoping legs (at 70 and 3,50 angles), making it

easier to sit down and get up.

You may want to use a seat height of 47 cm at the

front and 53 cm at the back.

Technical data and item no: Please see back.


20

Technical Data: 200 kg Shower stool with telescoping legs Seat height 47 cm - 50 cm - 53 cm

Max. total height 67 cm

Min. total height 61 cm

Seat width 70 cm

Max. width at floor 83 cm

Min. width at floor 82 cm

Seat depth 36 cm

Max. depth at floor 48 cm

Min. depth at floor 46 cm

Weight 9,4 kg

Max. Load 200 kg

Inclining the seat With the front clip placed in the lower hole and the rear clip in the upper hole, the

seat height is 47 cm at the front and 52 cm at the back (70 angle)

With the front clip placed in the lower hole and the rear clip in the intermediate

hole, the seat height is 47 cm at the front and 50 cm at the back (3,50 angle)

Surface treatment

Rilsan which is a nylon coating with following characteristics: Waterproof.

Chemically proof



Slates Plastic slates 60 mm width and 6 mm thick

Rubber Feet’s Non-slip technical grey rubber “no marks at the floor”.

Hole in the rubber feet for outflow of water

Telescopic legs Stainless steel with 3 adjustments, distance 3 cm

Article: Art. No. 200 Kg shower stool 500 mm 310145

Back rest for 200 kg shower stool 310144

Clip for this model shower stool 310065

27.09.12


21

300kg Neptun Super Soft shower stool In stainless steel with telescopic legs

Made to fit larger users with the need of more space.

Seat width of 75cm meets the requirements of

most users.

Reinforced to handle the max load of 300kg.

Seat and backrest can be cleaned in autoclave.

The stool in made entirely in stainless steel.

The backrest can easily be assembled and

disassembled without the use of tools.

Seats and backrest made in very soft PU foam.

The two seats can easily be detached.

User-adaptable backrest provides the greatest

level of comfort.

The solid construction of the frame ensures a stable

shower stool even at the max load of 300kg.

The stainless telescopic legs provide the shower

stool with height adjustment in 3 levels:

49, 52 and 55cm.

Height-adjustable via clips

(without the use of tools)

Technical data and item no: Please see back.


22

Technical data: 300kg Neptun Super Soft shower stool In stainless steel with telescopic legs

Seat heights 49 cm - 52 cm - 55 cm

Max. Total height 67 cm

Min. Total height 61 cm

Seat width 75 cm

Max. Width at floor 86 cm

Min. Width at floor 85 cm

Seat depth 40 cm

Max. Depth at floor 58 cm

Min. Depth at floor 56 cm

Weight 12,6 kg (The weight of the backrest is 3.1 kg.)

Max. load 300 kg

Surface treatment Powder lacquered, white

Seat and backrest PU foam

Rubber feets Non slip technical grey rubber ”no marks on the floor”.

Hole in the rubber feet for outflow of water.

Telescopic legs Stainless steel, 3 levels of heights at 3cm intervals. Adjustable by clips.

Article: Art. no. ISO no.: 300 kg showerstool 300300 09 33 03

Backrest for 300kg showerstool 300301

Clips 310065

29.09.12


23

NEPTUN Supersoft Transfer shower stool

Neptun super soft stainless steel shower stool

constructed especially for transport from wheelchairs,

shower-commode chairs etc. to the shower stool.

It’s made from stainless steel

Easily height adjustable (45-66 cm)

The backrest is depth adjustable in two steps

Seat and back can be cleaned in disinfecting bedpan

washers.

⇒ The shower stool allows the users to transfer

themselves using a sliding board.

⇐ Extra soft seat and back for even higher comfort.

Technical data and item numbers: Please see back


24

Technical data: NEPTUN Supersoft Transfer shower stool Backrest

Seat height 44-65 cm -

Total height (upper armrest) 56-77 cm Upper edge of backrest

81-102 cm

Size Foam Seat B40xD36xH4 cm -

Width at the floor, approximately 63-67 cm -

Depth at the floor, approximately 43-49 cm -

Measurements, backpiece – PU part - Width lower edge

34 cm

Width upper edge

24 cm

Height 27 cm

Adjustable Depth – Backrest - 2 cm from edge of seat

4 cm from edge of seat

Weight Ca. 6,0 kg Ca. 1 kg

Material: Seat /backrest PU Foam PU Foam

Maintenance Normal cleaning agents at max. 80 ºC Same agents as the bench

itself

Stackable Yes -

Maximum userwheight 150 kg 150 kg

Frame Stainless steel, powder coated, white Stainless steel, powder

coated, white

Teleskope legs Aluminium (stainless) height adjustable, 8

levels

-

Rubber feet for legs Grey plastic, with draining hole -

Article: Art. no. ISO nr.: Neptun Supersoft transfer shower stool 312010 09 33 03

Neptun Super Soft Backrest 312021

Spare parts: Clips for height adjustment and mounting of backrest 310065

PU foam Seat for Neptun Super Soft 800300

Teleskopic leg (1 piece with clip, rubber foot and bush) 312033

Rubber foot 310017

Bush 310021

PU foam backrest piece Neptun Super Soft 800301

29.09.12


25

NEPTUN Small Shower Stool In stainless steel

Small shower stool made for places where you do

not have enough room for a standard shower stool.

Made in Stainless Steel (telescopic legs in

aluminium).

Very comfortable seat.

Very easy to clean.

Very easy to adjust height (43-58 cm).

⇒Air filled plastic seat which you

can click off (for cleaning a.s.o.).

The seat is with a nobly surface

and with water grooves.

⇐The frame is designed to

make it very easy to clean.

⇒The Height is adjusted with clips

NB! You cannot use a backrest

with this item.

Technical data and item no: Please see back


26

Technical data: NEPTUN Small shower Stool In stainless steel

Neptun small Shower Stool

Seat heights

43-58 cm

Seat size. (size of the plastic seat) W41xD36, 5xH4,5 cm

App. Widths at floor 40-42,5 cm

App. Depths at floor 44-46 cm

Weight 3,7 kg

Seat plastic part material Polythene plastic

Cleaning Ordinary cleaning detergents at max. 80 degrees.

Stackable Yes

Max. user load 150 kg

Frame Stainless Steel.

Powder lacquered

Telescopic legs Aluminium. Height adjustable in 8 positions.

Rubber feet Grey plastic. Hole in bottom for outflow of water.

NB! You cannot use a backrest with this item

Article: Art. No. Neptun small shower stool 312100

Spare parts:

Clips for height adjustment 310065

Plastic seat for Neptun 312030

Telescopic legs (1 pc. with clips, rubber feet, bush) 312130

Rubber feet (for telescopic legs) 310017

Bush (for telescopic legs) 312131

27.09.12

‘


27

M2 shower/commode chairs M2 Shower/commode chair standard ........................................................................................ 28

M2 Shower/commode chair with curved pushing frame ............................................................ 30

M2 Shower/commode chair Boxed ............................................................................................ 32

M2 Shower/commode chair with curved pushing frame ............................................................ 34

& net-weave back ...................................................................................................................... 34

M2 Shower/commode chair with armrests going to the side ..................................................... 36

M2 Shower/commode chair without wheels .............................................................................. 38

M2 Shower/commode chair with central brake .......................................................................... 40

M2 Shower/commode chair Self-propelled with 24” Wheels ..................................................... 42

M2 Shower/commode chair self-propelled, Boxed .................................................................... 44

M2 Shower/commode chair 200 kg ........................................................................................... 46

M2 Shower/commode chair 200 kg Motor ................................................................................. 48

M2 Shower/commode chair 300 kg ........................................................................................... 50

M2 Shower/commode chair M2 Small ....................................................................................... 52

”Hip-patient” seat for M2 shower/commode chairs .................................................................... 54

�

Return to menu


28

M2 Shower/commode chair standard Height adjustable in stainless steel

⇑With extra large hole

Version where the seat has an extra-large hole

allowing room for washing i.e.

Article. No.: 310036

(The chair is shown with footrests)

⇑M2 with standard seat

The armrests are going straight up.

Article no. 310035

(The chair is shown with footrests)

Seat height adjustable from 45 cm-57 cm (no tools

involved, just move a clip).

Standard is four 100 mm rubber tires with double

action brakes.

4,5 cm thick p.u. foam seat and back which is soft

and very durable.

Incl. in the standard chairs is seat lid in p.u. foam

and built in holder for bucket.

The seat “clicks” on and off for easy cleaning.

⇑With the chair follows a lid which covers the whole

seat.

If you wish the chairs can be delivered with pu foam

cushions on the armrests.


29


Technical data: Standard models Shower/Commode chair M2

Height adjustable Ca. 44,5 cm-46,5 cm-48,5 cm-50,5 cm-52,5 cm-54,5 cm-56,5 cm

Seat width 46,5 cm

Seat depth 44 cm

Heights (by handles) 84 cm-97 cm

Max. width (by armrests) 58 cm

Width between armrests 46 cm

Free heights under seat 35,5 cm-48,5 cm

Max. Floor measurement (without footrests)

Depth 66 cm With 50 cm

Weight 16 kg

Max. Load 150 kg

Wheels 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on all 4 wheels.

Height adjustment Telescopic legs of stainless steel with 7 adjustments, distance 20 mm.

Seat/back/seat lid Seat: 45 mm thick P.U. foam Back: 25-40 mm thick P.U. foam Seat lid: 25 mm P.U. foam

Surface/metal ALL STAINLESS STEEL and powder lacquered

Description: Item number: Shower/commode chair M2 with armrests going straight up. (incl. seat lid and hanging for bucket). With standard seat.

310035

Shower/commode chair M2 with armrests going straight up. (incl. seat lid and hanging for bucket) With extra large hole.

310036

OTHER MODELS: SEE BROCHURES ABOUT THESE.

ACCESORIES: (See brochures for more details)

Extra charge when you want pads on the armrests 310043

Foot rests for M2 310049

Bucket with lid for all seats 310048

Stainless steel bedpan 330017

Extra charge for chair delivered with “hip-patient” seat 310250

Leg rests with elevation. Set with one for each side. 1 calf rest for each. 310052

Leg rest with elevation. One for right leg. With one calf rest. 310053

Leg rest with elevation. One for left leg. With one calf rest. 310054

One leg rest with elevation and one normal footrest. Elevational for left leg. One calf rest for the elevational.

310055

One leg rest with elevation and one normal footrest. Elevational for right leg. One calf rest for the elevational.

310056

Extra calf rest. 310358

Plastic cover for leg rests with elevation. One piece. 310058

Adjustable head support. Including mounting set 310059

Drip stand for mounting on M2’s. Incl. Mounting kit. 310050

Mounting kit for drip stand (without the drip stand itself) 310051

Standard seat for M2. 310340

Seat lid for standard seat 310341

Seat with extra large hole for M2. 310342

Seat lid for seat with extra large hole 310343

White foam seat for shower/commode chairs. 330016

14.08.12


30

M2 Shower/commode chair with curved pushing frame Height adjustable in stainless steel

With curved pushing frame.

⇑With the chair follows a lid which covers the whole

seat.

⇑M2 with standard seat.

(Shown with accessories)

Version with curved pushing frame, which makes

the chair able to go very close to the wall

(can be necessary if the toilet cistern is built

into the wall).

Otherwise the chair is like M2 with pushing handles.

Seat with extra large hole. The seat can be clicked

off and on so you can change between standard

seat and seat with extra large hole

If you wish the chairs can be delivered with pu foam

cushions on the armrests.



31

Technical data: Shower/Commode chair M2, with curved pushing frame Height adjustable. ALL STAINLESS STEEL

Seat heights Ca. 44,5 cm-46, 5 cm-48,5 cm-50,5 cm-52,5 cm-54,5 cm-56,5 cm

Seat width 46,5 cm

Seat depth 44 cm

Heights (by pushing frame) 84 cm-97 cm




Max. floor measurement (without footrests)


Weight 16 kg

Max. Load 150 kg





Description: Item number: M2 Shower/commode chair. With armrest going straight up. With curved pushing frame.

310034

M2 Shower/commode chair. With armrest going straight up. With curved pushing frame. With extra large hole.

310091




Bucket with lid for all seats. 310048







310055


310056











14.08.12


32

M2 Shower/commode chair Boxed With curved pushing frame. Height adjustable in stainless steel

⇑ M2-Boxed with standard seat and curved

pushing frame. (Shown with accessories)

For further product attributes etc.: See brochure on M2 with pushing frame.

This is how little space an M2-Boxed parcel takes up compared to a normal M2 parcel.

There can be 14 M2-Boxed on a standard EU-pallet.

⇑With the chair follows a lid which covers the

whole seat.

M2 in Boxed version is very easy to assemble. It is easily done with an Allen wrench.

The chair is packed in a compact carton and can easily be transported.

The measurement of the carton is H 360 x B 615 x D 490

In the box there is also room for bucket and footrests.

Seat with extra large hole. The seat can be

clicked off and on so you can change between standard seat and seat with extra

large hole



33

Technical data: Shower/Commode chair M2 BOXED, with curved pushing frame Height adjustable. ALL STAINLESS STEEL


Seat width 46,5 cm

Seat depth 44 cm







Weight 16 kg

Max. Load 125 kg





Description: Item number: M2 Boxed shower/commode chair. With armrest going straight up. With curved pushing frame.

310700

M2 Boxed shower/commode chair. With armrest going straight up. With curved pushing frame. With extra large hole.

310701











310055


310056











14.08.12


34

M2 Shower/commode chair with curved pushing frame & net-weave back

Height adjustable in stainless steel

⇑

Flexible washable back part in net-weave. The depth on the back part is adjusted by 2

buckles

⇑ Seat with extra large hole. The seat can be clicked off and on so you can change between standard

seat and seat with extra large hole

⇑ With the chair follows a lid which covers the whole

seat


⇑ M2 with standard seat.

(Shown with accessories)

With curved pushing frame. Version with curved pushing frame, which makes

the chair able to go very close to the wall. Back part in net-weave that ensures greater

flexibility for the user.

⇑ If you wish the chairs can be delivered with pu

foam cushions on the armrests.


35


Technical data: Shower/commode chair M2 with curved pushing frame & net-weave back.

Seat heights App. 44,5 cm-46,5 cm-48,5 cm-50,5 cm-52,5 cm-54,5 cm-56,5 cm

Seat width 46,5 cm

Seat depth 44 cm





Max. floor measurement (without footrests) Depth 66 cm width 50 cm

Weight 16 kg

Max. Load 150 kg

Wheels. (Standard is 100 mm. Can against an extra charge be delivered with 125 mm wheels)

125 mm wheels with grey rubber and ball bearings. Double working brakes on all 4 wheels.

Height adjustment Telescopic legs of stainless steel with 7 height adjustments with 2 cm’s interval. The height is adjusted with clips.

Seat/seat lid Seat: 4,5 cm thick P.U. foam Seat lid: 2,5 cm P.U. foam

Back part 24cmx43,5cm. Depth adjustment up till 10 cm. Net-weave with sewed on webbing and 2 buckles for adjusting depth. Washable at max. 80 degrees. (CANNOT be put in a tumble dryer.)

Surface/metal- frame

Stainless steel. Powder lacquered.

Description: Article no: M2 Shower/commode chair (Incl. Seat lid and build in holder for bucket) With curved pushing frame and net-weave. With standard seat.

310027

M2 Shower/commode chair (Incl. Seat lid and build in holder for bucket) With curved pushing frame and net-weave. Seat with extra large hole.

310028

ACCESORIES: (See brochures for more details) Extra charge when you want pads on the armrests 310043

”Push-away” footrests for M2 310049


Extra charge for chair delivered with 125 mm wheels (instead of standard 100 mm) 310219


Calf rests. Net-weave with velcro tape 310226






310055


310056




14.08.12


36

M2 Shower/commode chair with armrests going to the side


Curved armrests with pu foam

The chair can be ordered with straight armrests going to the side

⇑ M2 with seat with extra large hole (Shown with accessories)

Model where the armrests are moved out side wards.

It gives the user better access possibilities. Optional curved or straight

armrests (curved armrests are going down in front of the user)

Otherwise the chair is like M2 with pushing handles.

Straight armrests with pu foam.

Standard seat. The seat can be clicked off and on so

you can change between the two seats. With the chair follows a lid which covers the whole seat.



37

Technical data: Shower/Commode chair M2. Model with armrests going to the side Height adjustable. ALL STAINLESS STEEL


Seat width 46,5 cm

Seat depth 44 cm







Weight 16 kg

Max. Load 125 kg





Description: Item number: M2 Shower/commode chair. With armrest going to the side. With curved armrests 310030

M2 Shower/commode chair. With armrest going to the side. With straight armrests 310029

M2 with extra large hole. With armrest going to the side. With curved armrests 310090

M2 with extra large hole. With armrest going to the side. With straight armrests 310032











310055


310056











14.08.12


38

M2 Shower/commode chair without wheels Height adjustable in stainless steel

The chair can be adjusted from 450 - 570 mm

(height at seat) through 7 adjustments with 20 mm interval. This can be done without any tools by

moving a clip.

It can be adjusted, so it is 20 mm higher in the front than behind.

The chair has a padded seat and back, which are

soft and very durable.

⇑ Chair with seat with extra large hole and

armrests going straight up. Article no.: 310098

⇑Chair with standard seat and armrests going straight up.

Article no.: 310097

With the chair follows a lid which covers the whole

seat.

If you wish the chairs can be delivered with pu foam cushions on the armrests.

Technical data and item no.: Please see back .


39

Technical data:Shower/Commode chair M2 without wheels. ALL STAINLESS STEEL Seat heights Ca. 44,5 cm-46,5 cm-48,5 cm-50,5 cm-52,5 cm-54,5 cm-56,5 cm

Seat width 46,5 cm

Seat depth 44 cm







Weight 16 kg

Max. Load 125 kg




Description: Item number: Shower/commode chair M2 with armrests going straight up. (incl. seat lid and hanging for bucket). With standard seat. Without wheels (with telescopic legs)

310097

Shower/commode chair M2 with armrests going straight up. (incl. seat lid and hanging for bucket) With extra large hole. Without wheels (with telescopic legs)

310098

OTHER MODELS: SEE BROCHURES ABOUT THESE.











310055


310056











23/01-07


40

M2 Shower/commode chair with central brake Height adjustable in stainless steel

M2 with central brake is a completely new type of

shower / commode chair which locks all 4 wheels when pushing a button.

M2 with central brake is a

“Help the helper and users chair”.

It provides more security for the user while the chair is always locked on all 4 wheels and is stable and secure

on the floor.

+It helps the helper so it is much easier to lock all 4 wheels, you do not have to go all the way around the

chair to lock them. You just push the button.

The chair follows our standard dimensions and will fit

all standard toilets.

The chair is shown with accessories

Just one touch and all wheels are locked / unlocked. The button is placed convenient for both user and helper.

The seat can be clicked off and on, so you can change between the two seats. As an accessory you can have a lid which covers the whole seat.

The chairs can be delivered with pu foam on the armrests.

Technical data and item numbers: See backside


41

Shower/commode chair model M2 with central brake in stainless steel Technical data

Seat heights 55,5 cm

Seat width 46,5 cm

Seat depth 44 cm

Heights (by handles)

96 cm

Max. width (by armrests)

58 cm

Width between armrests

47,5 cm

Free heights under seat

48,5 cm



Weight 24,2 kg

Max. Load 150 kg

Hjul 125 mm wheels with grey rubber, ball bearings and central braking system. Seat/back Seat: 45 mm thick P.U. foam Back: 25-40 mm thick P.U. foam

Electrical engine/battery system

El-tightness = IP65 (dustproof and protected against water beams)


Description: Article no: Shower/commode chair model M2 with central brake. Standard seat. (incl. hanging for bucket)

310208

Shower/commode chair model M2 with central brake. Seat with X-large hole. (incl. hanging for bucket)

310209







Calfrest, grey netweave 310226

For more accessories: See accessories brochures.

21/6-2011


42

M2 Shower/commode chair Self-propelled with 24” Wheels Height adjustable in stainless steel

(lightweight Magnesium wheels)

This version of the M2 chair is made with massive 24-inch wheels.

The rims and spokes are made out of lightweight Magnesium for greater driving

comfort

It comes in two versions: With standard seat and with seat with extra large hole.

(You can change between the two seat types by clicking the seats of and on)

If you want the chair with a smaller width, you can get it delivered without the driving handle

on the wheels.

The chair is height adjustable in 3 heights:: Seat height; 47 cm-49 cm-56 cm

The propelling wheels have two hand breaks. The front wheels are 125 mm (with brakes).

With the chair follows a lid which covers the whole seat.

With x-large hole

⇐Without driving handles

As standard the chair is fitted with 2 anti-tip bars for extra

safety.

The chair got a continuously variable handbrake in aluminium

on the two Self-propelling wheels.

The self-propelling wheels got quick release axles so it is easy to

remove the wheels for cleaning and height-adjusting



43

Tech. data: M2 shower/commode chair. Stainless steel. Height adjustable, Self-Propelled.

Seat heights 47 cm-49 cm-56 cm

Seat width 46,5 cm

Heights at the top points(at the handles) 88 cm-90 cm-97 cm

Biggest total width (at the back-wheels) 63 cm (width without driving handle on=60 cm)

Width between armrests. 46 cm

Free height under seat 38 cm-40 cm-46,5 cm

Max. floor measurement (without footrests) Depth 75,5 cm width 63 cm (without driving handle 60 cm)

weight 17,6 kg

Max. Load 125 kg

Wheels Front wheels: 125 mm wheels with grey rubber and ball bearing. Back wheels: 24” (61 cm) Magnesium wheels, 3 spokes and massive PUR.

Brakes Handbrakes in aluminium and stainless steel

Height adjusting At front wheels: Telescopic legs off stainless steel with 3 adjustments. Height is adjusted with clips. At back wheels: With the help of a wrench key you move the bushings to the back wheels. Brakes: With the help of a wrench key you move the brakes.

Seat/back/seat lid Seat: 4,5 cm thick P.U. foam. Back: 2,5-4 cm thick P.U. foam Seat lid: 2,5 cm P.U. foam.

Surface/metal Stainless steel. Powder lacquered.

Description: Item number: Shower/commode chair M2 with armrest straight up and with self-propelling 24 “ wheels. (Incl. seat lid and hanging for bucket). STANDARD SEAT

310037

Shower/commode chair M2 with armrest straight up and with self-propelling 24 “ wheels. (Incl. seat lid and hanging for bucket). WITH EXTRA LARGE HOLE.

310038










310055


310056











13.09.12


44

M2 Shower/commode chair self-propelled, Boxed Height adjustable in stainless steel

(with 24” lightweight Magnesium wheels)

This version of the M2 has a detachable back rest meaning it can be packed in a much

smaller box.

The wheels are lightweight magnesium which gives extra droving comfort

The chair comes in two versions: one with a standard seat, and one with a seat with XL-

hole. The seats can easily be switched with the click on system.

The chairs is height adjustable in three

positions (seat height): 47 cm-49 cm-56 cm

With the chair follows a lid which

covers the whole seat

With x-large hole

Minimum transport cost and

storage needed. (24” wheels are in separate box)


safety.

The chair got a continuously variable handbrake in aluminium

on the two Self-propelling wheels.

Quick release axles makes it easier to remove the wheels for cleaning and height-adjusting



45

M2 Shower/commode chair self-propelled, Boxed Seat heights 47 cm-49 cm-56 cm

Seat width 46,5 cm

Heights at the top points(at the handles) 88 cm-90 cm-97 cm

Biggest total width (at the back-wheels) 63 cm (width without driving handle on=60 cm)

Width between armrests. 46 cm

Free height under seat 38 cm-40 cm-46,5 cm

Max. floor measurement (without footrests) Depth 75,5 cm width 63 cm (without driving handle 60 cm)

weight 17,6 kg

Max. Load 125 kg

Wheels Front wheels: 125 mm wheels with grey rubber and ball bearing. Back wheels: 24” (61 cm) Magnesium wheels, 3 spokes and massive PUR.

Brakes Handbrakes in aluminium and stainless steel

Height adjusting At front wheels: Telescopic legs off stainless steel with 3 adjustments. Height is adjusted with clips. At back wheels: With the help of a wrench key you move the bushings to the back wheels. Brakes: With the help of a wrench key you move the brakes.

Seat/back/seat lid Seat: 4,5 cm thick P.U. foam. Back: 2,5-4 cm thick P.U. foam Seat lid: 2,5 cm P.U. foam.

Surface/metal Stainless steel. Powder lacquered.

Description: Item number: Shower/commode chair M2 with armrest straight up and with self-propelling 24 “ wheels. (Incl. seat lid and hanging for bucket). STANDARD SEAT

310702

Shower/commode chair M2 with armrest straight up and with self-propelling 24 “ wheels. (Incl. seat lid and hanging for bucket). WITH EXTRA LARGE HOLE.

310703










310055


310056








21-2-2011


46

M2 Shower/commode chair 200 kg Height adjustable in stainless steel

M2 200 KG

The chair is shown with footrests that are accessory. (item nr. 310275)

The M2 200 KG is made for the larger users.

The chair is strengthened so that it can sustain user loads up too max. 200 kg.

Despite the fact that the chair is made for larger users, we have kept it in the simple style, which makes it easy to clean.

With a comfortable seat 10 cm wider than our standard seat we have ensured that you sit pleasantly, and

that there is space for most users.

The seat can be clicked on and off in the same way as our traditional standard seat. (NB! It only comes with seat with x-large hole)

Easy height adjustable through telescopic legs.

The height adjustable footrests can be swung to the side for easier access to the chair.

The seat can easily be removed for cleaning.

This chair comes with PU foam on the armrests as standard.

Technical data and item numbers: See backside.


47

M2 Shower/commode chair 200 kg Technical data

Seat Heights With 125 mm wheels = 46 48 50 52 54,5 cm. On wish the chair can be delivered with 100 mm casters. This will give the following seat heights: 43,5 – 45,5 – 47,5 – 49,5 – 52 cm

Weight 18,5 kg

Seat width 56 cm

Seat depth 44 cm

Maximum width 68 cm

Space between armrests 56 cm

Maximum lenght (without footrests)

68.5 cm

Maximum load 200 kg

Wheels 125/100 mm wheel with grey rubber and ball bearing. Double action brakes on three wheels. (4th is a directional controlling wheel)

Back 39 cm x 20 cm. P.U. foam 2.5-4 cm thick

Foam parts Seat: 4,5 cm thick P.U. foam. Seat lid: 2,5 cm P.U. foam. Armrest Cushions 2,5 cm P.U. foam

Surface/metal Frame


Description Item no: ISO no.: Shower/commode chair model M2 200 kg, with 125 mm wheels 310272 09 12 03

Chair delivered with 100 mm casters. 310220

Footrests for M2 200/300 KG 310275

Bucket with lid 310048

Accessories: Headrest, calf support, etc. See accessory brochures

14/01/11


48

M2 Shower/commode chair 200 kg Motor Height adjustable in stainless steel

M2 200 kg-Motor is designed for extra large users. The chair is special made and load tested to up to 200 kg.

It is equipped with a joystick to control forward, backward driving and turning. It helps the user to independently get in and out of the shower more easily.

Additionally, moving heavy users is easier because of the power from the motor.

With a PU foam seat, that is 10 cm larger than our standard seat, we have made sure that the user is sitting comfortably and that there is room for basically any user.

The joystick ensures easy control of the chair. Without the use of tools the

joystick can be moved from the user to a holder on the handles where the

helper can handle it. The speed is adjustable. There is a

horn, and an indicator that shows how much power there is on the battery.

When the user let the joystick go, the rear wheels brake immediately. This

ensures the safety of the user when he or she is in the shower or on the toilet.

As standard follows a lid, which covers

the whole seat.

This chair comes with PU foam on the armrests as

standard.

The height adjustable

footrests are re-enforced to carry heavy weight.

They can be lifted on and off without the use of

tools.



49

M2-motor Shower /commode chair stainless steel Technical data:

Seat height 56,5 cm

Seat width 56 cm

Seat Depth 44 cm

Height at highest point 97 cm

Max width 71,5 cm


Free height under seat 46 cm

Length (without footrests)

71 cm

Turning circle App. 100 cm without footrests.

Weight App. 30 kg

Max. Load 200 kg

Wheels Front wheels: 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on both wheels. Rear wheels: 200 mm fixed wheels, connected to motor.

Foam Parts Seat: 4,5 cm P.U foam Lid: 2,5 cm P.U. foam Armrests 2,5 cm P.U. foam

Electric motor/ Batterysystem

Gear motor, Control box, Battery and joystick. Joystick with battery-indicator.

Tightness = IP65 (sealed against dust and protected against squirt/rays of water).

Metal/Surface; Frame Powder lacquered and ALL STAINLESS STEEL

Description: Item nr: ISO nr.: Shower/Commode chair M2 200 kg-Motor. (Incl. Open seat and lid) 310274

Height adjustable footrests to M2-200/300 kg 310275


More accessories : See Section with accessories. 11/1/11


50

M2 Shower/commode chair 300 kg Height adjustable in stainless steel

M2 300 KG

The chair is shown with accessories.

The M2 300 KG is made for the larger users. The chair is strengthened so that it can take users at a maximum of 300 kg.

The chair can go over the toilet. The armrests can be folded up and removed, and the users can easily move them away themselves.

Despite the fact that the chair is made for larger users we have made it simple so it is very easy to clean.

With a comfortable seat of 56 cm in width, we have ensured that you sit pleasantly; we have also made more room behind the seat, so there is space for most users.

The seat can be clicked on and off in the same way as our traditional standard seat.

(NB! It only comes with seat with x-large hole)

This chair comes with PU foam on the armrests as standard. The height adjustable footrests can be pushed to the side.

On the chairs there are installed big 125 mm

wheels, one of them is directional controlled,

easy to drive with. These wheels meet the

assistant while working.

The seat can easily be removed for cleaning. The cover you can

buy as an accessory.

The armrests can be folded up for easier access to the chair and this

gives the best accessibility for wash and space for transfers.

Technical data and item numbers: See backside.


51

M2 300 KG Technical data

Seat Height 56 cm. The chair is not height adjustable.

Seat width 55 cm

Seat depth 50 cm(Seat 44 cm)

Maximum width 70 cm

Space between armrests 60 cm

Maximum length (without footrests)

63 cm

Weight 20,4 kg

Maximum load 300 kg

Wheels 125 mm wheel with grey rubber band and ball bearings. Double action brakes on three wheels. The last wheel is a directional controlled wheel.

Back 39 cm x 20 cm. P.U. foam 2.5 -4 cm thick

Foam parts Seat: 4,5 cm thick P.U. foam. P.U. foam. Armrest Cushions 2,5 cm P.U. foam

Surface/metal Frame


Description Item no: ISO no.: Shower/commode chair model M2 300 kg, with 125 mm wheels 310280 09 12 03

Footrests for M2 200 / M2 300 KG 310275


Accessories: Cover, Headrest, calf support, etc. See accessory brochure

20/6-2011


52

M2 Shower/commode chair M2 Small Height adjustable in stainless steel

⇑ The armrests can be lifted and pushed aside.

(Can also simply be lifted of).

⇑ The seat clicks off and on for easy cleaning and change of seat type.

M2 for the small places and/or for the small users.

Outside width is app. 48 cm. Inside width between armrests is app. 38 cm.

Seat height adjustable from 45 cm-57 cm (no tools involved, just move a clip).

Is as standard delivered with: Four 100 mm closed rubber tires with double action brakes.

(Can also be delivered with 125 mm wheels), Seat lid and armrests pillows in p.u. foam and built in holder for bucket.

Curved pushing frame.

The chairs can be delivered with Standard seat or seat with x-large hole (Both with seat lid which covers the whole seat)



53

Shower/commode chair M2-SMALL. STAINLESS STEEL. Technical data: Seat heights Ca. 44,5 cm-46,5 cm-48,5 cm-50,5 cm-52,5 cm-54,5 cm-56,5 cm

Seat width 46,5 cm

Seat depth 44 cm

Total Heights (by curved pushing bar) 85 cm-97 cm





Depth 66 cm Width 48 cm

Weight 16 kg

Max. Load 125 kg





Description: Item number: Shower/commode chair M2-SMALL (incl. seat lid and hanging for bucket). With standard seat.

310278

Shower/commode chair M2-SMALL (incl. seat lid and hanging for bucket). With seat with x-large hole.

310279

Accessories: (See accessories brochures about details) Foot rests for M2 310049 Bucket with lid for all seats. 310048 Stainless steel bedpan 330017 Extra charge for delivery with 125 mm wheels (instead of the standard 100 mm)

310219

For more accessories: See accessories brochures.

14.08.12


54

”Hip-patient” seat for M2 shower/commode chairs

To get the right sitting position for users with hip problems the M2 shower/commode chairs can be

delivered with a so called ”hip-patient” seat.

The seat can be tipped continuously variable up to app. 8

cm (=app. Max. 110).

The seat height at the back is easily adjusted with the help of a

finger screw in each side.

The ”hip-patient” seat is mounted with strong metal fittings in

stainless steel.

NB! With ”hip-patient” seat on a chair the seat cannot be clicked

off and on (as normally).

The hip-patient function is here shown on an M2 standard chair

with seat with extra large hole and armrests going straight up and pu foam pillows on the armrest (art.

no. 310036 and 310043)

When ordering a chair with ”hip-patient” seat do as follows: Order the M2 version you want. F. x.:

M2 standard chair with armrests going straight up Art. no: 310035

+ Possibly accessories f. x. pu foam pillows on armrests. Art. no: 310043

+ Extra charge for chair delivered with ”hip-patient” seat Art. no: 310250

NB! M2-Tip, M2-XL and M2 with 24-inch wheels cannot be delivered with “hip-patient” seat.

NB! You can also get a Mounting kit for “hip-patient” seat

function. (to be mounted on your own chair) (nb! It does not come with the pu foam seat. You use your own)


The hip-patient function can also be delivered on chairs with intimate seat.

Hip-patient seat shown from behind in top position (app. 110).

The height (”the tip”) on the seat is adjusted continuously variable with the help of one finger

screw in each side.


55

”HIP-PATIENT” SEAT ON M2 SHOWER/COMMODE CHAIRS Technical data:

Height adjustment possibilities at the back (”tilting”)

From 0 (normal seating position) up till max. app. 8 cm. = max. adjustment app. 110.

Seat Width 45 cm (normal M2 standard seat)

Seat depth 44 cm (normal M2 standard seat)

Metal All metal parts=stainless steel.

Weight Extra weight on chair with ”hip-patient” seat = 2,3 kg

Max. Load 125 kg

Total width on chair with ”hip-patient” seat

App. 58 cm (Same width as normally. The widest place is by the armrests/finger screws).

Description: Art. No: Extra charge for chair delivered with ”hip-patient” seat.

Order art. No: (plus the chairs art. No)

310250

NB! You can also get a Mounting kit for “hip-patient” seat function. (to be mounted on your own chair) (nb! It does not come with the pu foam seat. You use your own)

310251

Rgd. Different models and details on M2 shower/commode chairs: See brochures on these

20/4-12


56

M2 shower/commode chairs, tilt-in-space & electric height adjustable M2 Shower/commode chair M2 El-‐Tip ....................................................................................... 57 M2 Shower/commode chair M2 Gas-‐Tip .................................................................................... 59 M2 Shower/commode chair M2 El-‐tip wide ............................................................................... 61 M2 Shower/commode chair M2 Flexi-‐tip ................................................................................... 63 M2 shower/commode chair Multi-‐tip –and accessories ............................................................. 67

Return to menu


57

M2 Shower/commode chair M2 El-Tip Height adjustable in stainless steel


Can be tipped 37 degrees backwards and 7 degrees forwards with the help of the built in electrical

engine. The electrical engine is battery driven and can

normally operate up and down 30-40 times by max. load before it have to be recharged. Simply applying

a pluck in the control box charges the batteries.

Height adjustable in 4 seat heights: 55,5 cm-57,5 cm-59,5 cm-61,5 cm

Flexible washable back part in net-weave. The back

part can be adjusted in the depth.

Can be delivered which 100 mm wheels (instead of the standard 125 mm), which gives a lowest seat

height of 53 cm. Comes as standard with: Normal seat, cover for the hole, p.u. Foam pillows for the armrests, lock on the armrests, double lockable 125 mm wheels on all 4

legs

Large accessories program such as: (See accessories brochures for details)

Height adjustable headrest, Height and depth adjustable headrest.

(Both the headrests can be adjusted in the width of the pu. foam pillow.).

”Push-away” footrests, Leg supports which with the help of Velcro tape can be adjusted in the depth.

Side support (for the upper body), Leg support (can be adjusted up till vertical)

Can also be delivered with standard seat (which is clicked

off and on) With the chair follows a lid which covers the whole seat.

Is delivered as standard with locks on the armrests

Simple remote control for up and down

movement.

The depth on the back part is adjusted by 2 buckles



58

M2-El-Tip. Tilt-In-Space Shower/commode chair Technical data:

Seat heights App. 55,5 cm-57,5 cm-59,5 cm-61,5 cm (If the chair is delivered with 100 mm wheels the lowest seat height is: 53 cm)

Seat width 46,5 cm

Seat depth 44 cm

Heights at the highest point

100 cm-102 cm-104 cm-106 cm

Biggest outside width(At engine)

59 cm


46 cm

Free height under seat

46,5 cm-48,5 cm-50,5 cm-52,5 cm (if there is 100 mm wheels on the chair the lowest height under the seat is 43 cm).

Length Without footrests

77 cm

Weight 25,8 kg

Max. Load 140 kg

Wheels 125 mm wheels with grey rubber and ball bearings. Double working brakes on all 4 wheels.


Back part 24cmx43,5cm. Depth adjustment up till 10 cm. Net-weave with sewed on webbing and 2 buckles for adjusting depth. Washable at max. 80 degrees. (CANNOT be put in a tumble dryer.)

Foam parts Seat: 4,5 cm thick P.U. foam. Seat lid: 2,5 cm P.U. foam. Armrest pillows 2,5 cm P.U. foam


Continuously variable block able engine. Surface treated metal. The batteries can normally operate up and down 30-40 times before being charged.

El-tightness = IP66 (dustproof and protected against water beams) Surface/metal- frame


Description: Article no: Shower/commode chair M2-El-Tip with armrest going straight up and with standard seat. (Incl. Seat lid, pu foam on armrests and build in holder for bucket)

310210

Shower/commode chair M2-El-Tip with armrest going straight up and with seat with extra large hole. (Incl. Seat lid, pu foam on armrests and build in holder for bucket)

310211

Accessories such as; Footrests, head support, calf rests a.s.o. See accessories brochures. 11/1/11


59

M2 Shower/commode chair M2 Gas-Tip Height adjustable in stainless steel


Can be tipped 37 degrees backwards and 7 degrees forwards.

Is tipped with the help of a gas spring to relieve

the helper.

Height adjustable in 4 seat heights: 55,5 cm-57,5 cm-59,5 cm-61,5 cm

Flexible washable back part in net-weave. The

back part can be adjusted in the depth.

Can be delivered which 100 mm wheels (instead of the standard 125 mm), which gives a

lowest seat height of 53 cm.

Comes as standard with: Normal seat, cover for the hole, p.u. Foam pillows for the armrests,

lock on the armrests, double lockable 125 mm wheels on all 4 legs


Height adjustable headrest,

Height and depth adjustable headrest. (Both the headrests can be adjusted in the width

of the p.u. foam pillow.). ”Push-away” footrests, Leg supports which with the help of Velcro tape can be adjusted in the

depth.


Can also be delivered with intimate seat (which is clicked off and on) With the chair follows a lid which covers the

whole seat.


User friendly handle for the gas spring



60

M2-Gas-Tip. Tilt-In-Space Shower/commode chair Technical data:

Seat heights App. 55,5 cm-57,5 cm-59,5 cm-61,5 cm (If the chair is delivered with 100 mm wheels the lowest seat height is: 53 cm)

Seat width 46,5 cm

Seat depth 44 cm

Heights at the highest point 100 cm-102 cm-104 cm-106 cm

Biggest outside width 57 cm (at armrests)


Free height under seat 46,5 cm-48,5 cm-50,5 cm-52,5 cm (if there is 100 mm wheels on the chair the lowest height under the seat is 43 cm).


74,5 cm

Weight 21 kg

Max. Load 140 kg



Back part 24 cmx43,5cm. Depth adjustment up till 10 cm. Net-weave with sewed on webbing and 2 buckles for adjusting depth. Washable at max. 80 degrees. (CANNOT be put in a tumble dryer.)


Gas spring. Braking system Continuously variable gas spring. Surface treated metal. Protected against water beams with a plastic cut. The brake on the spring is operated with a handle with cable.

Surface/metal- frame


Description: Article no: Shower/commode chair M2-Gas-Tip with armrest going straight up and with standard seat. (Incl. Seat lid, pu foam on armrests and build in holder for bucket)

310201

Shower/commode chair M2-Gas-Tip with armrest going straight up and with seat with extra large hole. (Incl. Seat lid, pu foam on armrests and build in holder for bucket)

310202

Bracket to avoid negative tip ( Only fits on M2-Gas-Tip) 800251

Accessories such as; Footrests, head support, calf rests a.s.o. See accessories brochures. 11/01-2011


61

M2 Shower/commode chair M2 El-tip wide Height adjustable in stainless steel. Max load; 200 kg.

When there is needed more space between the armrests you can easily choose the M2-El-Tip wide. With 56 cm between the armrests there is space for

most users.

Can be tipped app. 30 degrees backwards and 7 degrees forwards with the help of the built in electrical

engine.

The actuator can normally operate up and down 30-40 times by max. Load.

Seat height 58,5 cm. Can be delivered which 100 mm wheels (instead of the standard 125 mm), which gives a lowest seat height of

56 cm.

Comes as standard with: seat with extra large hole, cover for the hole, pu foam pillows for the armrests,

lock on the armrests, double lockable 125 mm wheels on all 4 legs

With the chair follows a lid, which covers the whole seat.


Height adjustable headrest, Height and depth adjustable headrest.

(Both the headrests can be adjusted in the width of the pu foam pillow.).

Footrests, Leg supports which with the help of Velcro tape can be adjusted in the depth.

Side support (for the upper body).


Simple remote control for up and down movement.



62

M2-El-Tip wide shower/commode chair. Stainless steel Technical data: Seat height App. 58,5

(If the chair is delivered with 100 mm wheels the lowest seat height is: 56 cm)

Seat width 56 cm

Seat depth 44 cm

Biggest outside width (At engine)

67,5 cm


56 cm


53 cm (If the chair is supplied with 100 mm wheels, the lowest height under the seat is 50,5 cm).


74 cm

Weight 29 kg

Max. load 200 kg


Back part 30 cm x 53,5 cm. Depth adjustment up till 10 cm. Net-weave with sewed on webbing and 4 buckles for adjusting depth. Washable at max. 80 degrees. (CAN’T be put in a tumble dryer.)

Foam parts Seat: 4,5 cm thick pu foam. Seat lid: 2,5 cm pu foam. Armrest pillows 2,5 cm pu foam


Continuously variable block able engine. Surface treated metal. The batteries can normally operate up and down 30-40 times before being charged.

El-tightness = IP66 (dustproof and protected against water beams) Surface/metal- frame


Description: Article no: Shower/commode chair M2-El-Tip wide with armrest going straight up and with

seat with extra large hole. (Incl. Seat lid, pu foam on armrests and build in holder for bucket)

310212

Calf rest for M2-El-Tip wide 310233

11/1/11


63

M2 Shower/commode chair M2 Flexi-tip Height adjustable in stainless steel

Shower/commode chair, with remote operated adjustable seat and back recline.

M2 Flexi-Tip, with electrical

operated tilt function and back recline.

The chair is very suitable for users who have had hip surgery, users in

pain, users with bone cancer, sclerosis, palsy, spasticity, users with low tone, brain damaged and

neurological users.

Specifications and article numbers backside page 2.


64


This chair has big potential as

the many different seating positions will meet a whole

variety of demands.

The seat can be angled 7 degrees forward and 37 degrees backwards.

The angel between the backrest and seat

adjusted from 85 degrees to 130 degrees.

The chair is height adjustable through the

telescopic legs. Simple and without the use of tools.

Seat height can be adjusted from 56.5 cm to 62.5 cm. This will fit most toilets.

Specifications and article numbers backside page 2.


65

M2 Shower/commode chair M2 Flexi-tip


� The lock on the armrests automatically locks when

the armrests are lowered. Armrests can be removed for cleaning and easier access to the chair.

�

The closed castors are made so that they are maintenance free. They do not gather hair or any dirt

during showers.

� The simple remote is easy to understand and use

and does not require training of helpers/staff.

� The locking box makes it possible to lock the seat or

back in a desired position. This will help prevent mistakes where helpers/staff accidentally change the

angles.

� The flexible net weave back is easy to adjust and gives a

good and comfortable support for the back. With the adjustment it is possible to make the back rest fit

any user. The chair comes with a full cover lid, to give better

comfort when showering.

Specifications and article numbers page 2


66


Technical data: Seat height Ca. 56,5 cm-58,5 cm-60,5 cm-62,5 cm

(If the chair is delivered with 100 mm wheels, the lowest seat height is 54 cm)

Seat Width 46,5 cm

Seat Depth 44 cm

Maximum height 103 cm-105 cm-107 cm-109 cm

Maximum width 59 cm

Space between armrests

46 cm


47,5 cm - 49,5 cm - 51,5 cm - 53,5 cm (with 100 mm wheels the lowest free height is 44 cm).

Length (without footrests)

77 cm

Weight App. 31 kg

Maximum load 125 kg

Wheels 125 mm wheels with grey rubber and ball bearings. Double working brakes on 3 wheels. The last one is a directional wheel.


Back 24cmx43,5cm. Depth adjustment up till 10 cm. Net-weave with sewed on webbing and 2 buckles for adjusting depth. Washable at max. 80 degrees. (Not to be tumble dried.)


Motor/Batteries Continuously variable block able engine. Surface treated metal. The batteries can normally operate up and down 30-40 times before being charged.

El-tightness = IP66 (dustproof and protected against water beams) Surface/Metal Stainless steel. Powder lacquered

Description Item No. ISO nr.: M2 Flexi-Tip with standard seat 310216 09 12 03

M2 Flexi-Tip with seat with XL-hole 310217 09 12 03

Height adjustable footrests 310049


Accessories such as; Footrests, head support, calf rests a.s.o. See accessories brochures.

11/1/11


67

M2 shower/commode chair Multi-tip –and accessories

Electrical height adjustable shower/commode chair in stainless steel with el-tip function


68

M2 Multi-tip is a unique shower/commode chair, made to fulfil the

demands of the future.

The electric adjustment of the height is independent from the tip function. This enables to achieve the right working position and improves

the working environment for the helper.

The horizontal seat height can be adjusted

from 50 to 95 cm, and the seat angle can be tipped 5° forwards and 35° backwards, by

using the hand control.


69

Working enviroment

M2 Multi-tip is the right choice, if you want to improve the helpers working environment

The chair can be adjusted independently in seat height and tip function. This gives the best opportunity to place the user in the correct position.

This gives a better working position for the helper, and more dignity for the user.

As standard, one of the wheels is a

direction controlled wheel. (dark grey brake)

This will ease the manoeuvring and secure the working environment for the helper.


70

Better care

Provide a better and more dignified care for the elderly and disabled with the M2 Multi-tip.

With a low entering height at just 47 cm, the users who have the strength

can sit down themselves and are not forced to use a lift.

The electric height and tip function is stepless and independently adjustable.

The adjustable back rest ensures optimal support and the wide range of

accessories ensures a pleasant experience.

As standard equipment, you will

receive a comfortable hip strap for safety and it gives the user a good

sense of security.


71

Accessories for M2 Multi-tip M2 Multi-tip can be supplied with a wide range of accessories.

Head supports for M2 Multi-tip

The user can safely lean back in the chair for

full relaxation.

No matter which model you choose, you will get a

safe and comfortable support.

Head support height x depth x width adjustable

Art. no.: 310871

Head support in Supersoft foam Height x width adjustable

Art. no.: 310870

Side supports

When using side supports the user will get extra support for the

entire body.

The side supports are pushed into the fixed holders without

any use of tools.

Sidestøtter (sæt) Vare nr.: 310880

Højre sidestøtte: Vare nr.: 310881

Venstre sidestøtte Vare nr.: 310882


72

Technical data

46 cm

61 cm

Total width 61cm


73

Technical data


74

Accessories for M2 shower/commode chairs Hemiplegia armrests .................................................................................................................. 75 Head supports ........................................................................................................................... 77 Pu foam pillows on armrests ...................................................................................................... 79 Buckets/bedpan ......................................................................................................................... 81 Wheels ....................................................................................................................................... 83 Height adjustable ”push away” footrests .................................................................................... 85 Extended footrests ..................................................................................................................... 85 Footrests for XL chairs ............................................................................................................... 87 Amputation supports .................................................................................................................. 89 Leg rests with elevation ............................................................................................................. 91 Leg supports and heel stop ....................................................................................................... 93 Seats and foam seats ................................................................................................................ 95 Urine Funnel .............................................................................................................................. 97 Side supports ............................................................................................................................. 99 Cross bar and cross guard ...................................................................................................... 101 Hip strap .................................................................................................................................. 103 Drip stand ................................................................................................................................ 105

�

Return to menu


75

Hemiplegia armrests Accessories for M2 shower/commode chairs

Hemiplegia armrests with soft PU padding. Can be folded up and removed.

The PU pillow can be mounted in two depths using a hexagonal key.

This makes it possible to move the PU pillow 4 cm further back towards user, if required.

The picture is showing HEMI armrests mounted on a M2

with curved pushing frame.

Armrests on most of our chairs can be replaced with existing armrest on the

right, left or both sides.

Hemiplegia armrest is ideal for users

with hemiplegia, paraplegia, tetraplegia and others who need extra support at

the forearms.

On the backside you can see which M2 chairs the hemiplegia armrests can be used with.


76

Accessories for shower / commode chair M2 HEMIPLEGIA ARMRESTS

Technical data

The HEMI armrests do not fit on M2 chairs with armrest going to the side, M2 small, M2 Mini chairs, M2 200 KG, M2 200 KG MOTOR and M2 300 KG.

Length of PU pillow: 30 cm. Width of PU pillow: 11 cm. Total length of armrest: 41,5 cm. 1 pcs. left HEMI armrest 800273 1 pcs. right HEMI armrest 800274 1 set of HEMI armrest 800275


77

Head supports

Accessories for M2 shower/commode chairs

⇐ Ord. Head support. Can be adjusted in height and width on the pu foam pillow. Holders for head

support are standard on M2-tip.

For other chairs you have to order a

set of mountings

⇐ Height, depth, angle and width adjustable

head support.

Holders for head support are

standard on M2-tip. For other chairs you have to order a

set of mountings

⇐The pu foam pillow is a

flexible type which can be adjusted in

width.

⇐

Head support shown mounted on

an ordinairy M2 chair.

Holders for head support are standard on M2-tip. For other chairs you have to

order a set of mountings

Super Soft height and depth adjustable headrest.

Super Soft height adjustable headrest.



78

Technical data……..Accessories for M2 shower/commode chairs

Ordinary head support Height adjustment. Bottom to top

(Measured from the metal bar between the handles to the centre of the head support) 6,5 cm-32,5 cm

Depth (Measured from the metal bar between the handles to the centre of the head support)

8,5 cm

Angle adjustment of head support possible No

App. Depth on head support 13 cm

App. Width possibilities inside head support 10-21 cm

Mounted without use of tools Yes

Metal Stainless steel

Weight App. 1 kg

Article no: (Mountings are standard on M2-tip) 310221

Height and depth adjustable head support Height adjustment. Bottom to top

(Measured from the metal bar between the handles to the centre of the head support) 2,5 cm- 35 cm


3 cm-16,5 cm

Angle adjustment of head support possible Yes




Metal Stainless steel + ord. Steel

Weight Ca. 1,5 kg


Head support + mounting set (for ordinary M2’s) To be mounted on ordinary M2 chairs. Is screwed on with the help of the screws for the back rest

Metal Stainless steel + ord. steel

Weight App. 2 kg

Art no.: Height and depth adjustable head support including mounting set 310059

Art no.: Ordinary head support including mounting set 310087

Art no.: Mounting set (without head support) 310320

Super Soft height adjustable headrest. Height adjustment. Bottom to top

(Measured from the metal bar between the handles to the centre of the head support) 6,5 cm-32,5 cm


8 cm


App. Depth on head support 5,5 cm



Weight Ca 0,8 kg


Super Soft height and depth adjustable headrest. Height adjustment. Bottom to top

(Measured from the metal bar between the handles to the centre of the head support) 2,5 cm- 35 cm


3 cm-16,5 cm





Weight Ca. 1,0 kg



79

Pu foam pillows on armrests Accessories for M2 shower/commode chairs

Against an extra charge the armrests can be delivered with pu foam pillows on.

Is standard on: M2 Gas-tip, M2 El-tip, M2 Flexi-tip, M2 El-tip bred, M2 200 kg’s, M2 300 kg’s and small. On other chairs it has to be ordered as an extra.

Against an extra charge the armrests can be delivered with fast release locks on.

Can only be delivered on armrests with pu foam pillows.

Is standard on: M2 gas-tip, M2 el-tip, M2 Flexi-Tip, & M2 El-tip bred.

On other chairs it has to be ordered as an extra. Can not be put on M2 200 kg’s, M2 300 kg’s and M2 Small


80


Technical data

Pu foam on armrests P.u. on straight armrests: Length: 25,5 cm. Width 5 cm. Thickness: 2,5 cm. The pu foam pillow is rounded over

the edge of the metal armrest.

P.u. foam on curved armrests: Length 23,5 cm. Width 5 cm. Thickness: 2,5 cm

Are standard on M2-Tip, M2 200 kg and M2 small.

For other chairs order this article number as an option for the chair. 310043

Armrest set with fast release locks Are standard on M2-Tip

Cannot be used on M2, 200 kg’s and M2, small.

If you want other chair types delivered with fast release locks on armrests you order this article number as an option for the chair.

800071

1 set of armrests with fast release locks. Straight armrests with pu foam. 800014

1 set of armrests with fast release locks. Curved armrests with pu foam.(del. 2-3weeks) 800112


81

Buckets/bedpan Accessories for M2 shower/commode chairs

Bucket with lid for all seats.

Fits on all M2 chairs (and seats).

Recommended for all chairs.

This intimate bucket can be cleaned up to 135 degrees.

ergonomic handle is designed for better handling of a loaded bucket

With bucket follows a lid

The bucket is mate with drain holes, the drain holes are also to mounting holes.

⇑Stainless steel bedpan w/lid.

Cannot be used on M2-Tip


82


Technical data

Bucket with lid for all seats Diameter hole 23 cm

Length hole 33 cm

Depth 13 cm

Weight incl. lid 0,9 kg

This Bucket tolerate cleaning up to 135 degrees - RECOMMENDED FOR ALL M2 CHAIRS- Article no.: 26-02-2010

310048

Stainless steel bedpan w/lid Diameter 30,5 cm

Depth 16 cm

Hanging edge 2,5 cm

Weight 1,1 kg

Article no.: 330017


83

Wheels Accessories for M2 shower/commode chairs

⇐100 mm wheels.

Is standard on: M2 with armrests straight up, armrests to the side, M2 with curved pushing

frame and M2 small. M2-Tip chairs can be

delivered with 100 mm wheels if you want a

lower seat height

⇐125 mm wheels.

Is standard on: M2-Tip chairs.

Can against an extra charge be delivered on

ordinary M2 with armrests straight up, armrests to the

side, M2 with curved

pushing frame and M2 small. It gives easier

handling of the chair and higher seat height.

Directional controlling wheels: To all models of M2 (M2 24”) we can supply as accessories directional controlling wheels.

These wheels can be locked, so they will only drive straight forward. (These wheels are not possible

to brake. They can always roll forward.) This makes it easier to start pushing the chair and it will be easier to push the chair straight forward. It is mainly recommended when there is a heavy user

in the chair and when you have to drive the chair through long corridors, and where the foundation isn’t in level.

⇐On telescopic leg with 7 holes for M2 with armrests straight up, armrests to the

side, M2 with curved pushing frame and M2 small. Can be supplied with 100 mm. wheels

or with 125 mm.

⇐ On telescopic leg with 4

holes for M2-tip. Can be supplied with 125 mm

wheels or with 100 mm.

⇐The dark grey brake indicates that this wheel is the directional controlling wheel.



84


100 mm wheels with ball bearings. Are standard on: M2 with armrests straight up, armrests to the side, M2 with curved pushing frame, M2 small and

M2, 200 kg’s low. M2-Tip chairs can be delivered with 100 mm wheels if you want a lower seat height

Order this article number for 100 mm wheels as an option on the chair: 310220

125 mm wheels with ball bearings

Are standard on: M2-Tip chairs and M2, 200 kg’s. M2 with armrests straight up, armrests to the side, M2 with curved pushing frame and M2 small can be delivered

with 125 mm wheels. (NB! The seat height will be 2½ cm higher with 125 mm wheels.

Order this article number for 125 mm wheels as an option on the chair 310219

100 mm directional controlling wheel with ball bearings. To be mounted on all M2 models except for M2 24”.

The M2 chairs can as well be ordered with on directional controlling wheel.

1 directional controlling wheel on telescopic leg with 7 adjustments for M2 with armrests

straight up, armrests to the side, M2 with curved pushing frame and M2 small. 800150

1 directional controlling wheel on telescopic leg with 4 adjustments for M2-tip. 800152

1 directional controlling wheel for M2 200 kg’s 800154

If you want to have a new chair delivered with one directional controlling wheel and 3 ordinary wheels order this article number as well as the chairs article number.

800157

125 mm directional controlling wheels with ball bearings To be mounted on all M2 models except M2 24”.

The M2 chairs can as well be ordered with on directional controlling wheel.

1 directional controlling wheel on telescopic leg with 7 adjustments for M2 with armrests

straight up, armrests to the side, M2 with curved pushing frame and M2 small (only if the chairs

are with 125 mm. wheels.)

800151

1 directional controlling wheel on telescopic leg with 4 adjustments for M2-tip. 800153

1 directional controlling wheel for M2 200 kg’s low. 800155

If you want to have a new chair delivered with one directional controlling wheel and 3 ordinary wheels order this article number as well as the chairs article number.

800157


85

Accessories for M2 shower/commode chair M2 Footrests

Height adjustable ”push away” footrests

With one grip they can either be pushed a side or under the chair. You can

adjust the height with the help of a clip.

Extended footrests

Extra-long footrests so even the tallest user will sit properly.

The footrests are extended with a total of 10 cm, and are reinforced, so they can handle up to 150 kg.



86

Technical data Height adjustable footrests

7 height adjustments

2 cm between each level

Weight set with two pieces 1,2 kg

Adjust the height with the help of clips. The footrests are of stainless steel and the foot plate of hard plastic.

Article no.: 310049

Extended footrests 7 height adjustments


Weight set with two pieces

2,0 kg

Adjust the height with the help of clips. The footrests are of stainless steel and the foot plate of hard plastic.

Article no.: 310283

01.11.12


87


Footrests for XL chairs

Footrests M2, 200 kg’s and M2 300 kg’s.

Height adjustable footrests 200+300kg. With one grip they can either be pushed a side or under the chair. You can adjust the height with the help of a clip.



88


Height adjustable footrests for M2, 200 kg’s and 300 kg’s

7 height adjustments


Weight set with two pieces 2,6 kg

Adjust the height with the help of clips. The footrests is of stainless steel and the foot plate of hard plastic.

Article no.: 310275


89

Accessories for shower/commode chair M2 Amputation supports

The amputation supports can be mounted on all of our M2 models. They are mounted the same way as the standard foot rests.

The support plates are made in soft PU foam. Despite the softness of the support plates, they still manage to give the stability and support needed.

The angle can easily be adjusted by a simple press of a button on the outside of the amputation support.

It has five angles and can be

adjusted from horizontal and down.



90

Accessories for shower/commode chair M2

Technical data Amputations support

Number of adjustments to horizontal angle

5 adjustments

Washable at: 80 degrees

Mounted without use of tools

Yes

Made from stainless steel, support foam in PU

Weight for one piece.: App. 1,1 kg

Art. no. right: 800343

Art. no. left: 800344

01.11.12


91

Leg rests with elevation Accessories for M2 shower/commode chairs

Leg rest with elevation. Can be elevated in 6 positions (up till horizontal) .

Can be put an all models of M2 chairs without use of tools.. As standard each leg rest comes with one calf rest. The calf rest can be adjusted in the length of the leg rest with

a finger screw.

Fits all M2 chairs from December 2000 and newer.

Leg rest with elevation can be used on M2, 200 kg’s. with MAX. user weight until 140 kg.

The height is easily adjusted with the help of a finger lock on the side of the leg rest.

Extra calf rests can be put on if necessary

As accessories you can get footrest plates to be put on elevational leg rests. They are screwed on the end of the leg rest..



92


Leg rests with elevation

Max. Length (from chair) To end of calf rest 73 cm

Height adjustment possibilities (up till horizontal) 6 positions

Calf rest size W14, 5cmxL 21,5cm

Weight leg rests. Pr. Set 3,4 kg

Comes with one calf rest as standard.

Comes with protection cover for adjustment

Metal = Stainless steel

Fits all M2 chairs from Dec. 2000 and newer. (Can be used on M2, 200 kg’s with MAX. user weight until 140 kg.) Leg rests with elevation. Set with one for each side. 1 calf rest for each. 310052




310055


310056


Footrest plates

Plate distance from seat (with one leg-support on) 34,5-72,5 cm

Weight 0,6 kg

Stainless steel+plastic

Order for right or left side

Foot rest plate, for right side 310085

Foot rest plate, for left side 23/01-07

310086


93

Accessories for M2 shower/commode chair

Leg supports and heel stop

The leg support is made from net weave and can be adjusted by velcro around the foot rests.

The leg support can be used on all M2 shower/commode chairs, and it exists in two sizes:

standard and XL.

The leg support is recommended for all tip-chairs, as it prevents the legs to slide backwards from the foot supports, while being tipped.

The leg support is depth adjustable and can be washed in a washing machine.

As an alternative one can choose to get heel

stops mounted onto the foot supports.

It prevents the feet to slide backwards of the footplates.

The footplates can still be pushed aside with

the heel straps mounted.



94

Technical data Calf support

Height on calf support 17 cm

Depth adjustment possible Yes



Made of washable plastic net weave with Velcro tape for adjustment

Weight App. 0,3 kg

Article no: 310226

Technical data Calf support 200 and 300 kg

Height on calf support 17 cm

Depth adjustment possible Yes



Made of washable plastic net weave with Velcro tape for adjustment

Weight App. 0,3 kg

Article no: 310233

01.11.12

Technical data Heel straps for foot rests

Height on heel strap 4,5 cm

Depth adjustment possible No


Mounted without use of tools No

Made from washable strap. Nuts and bolts in galvanized steel.

Weight: Ca. 0,3 kg

Article no.: 310285


95

Seats and foam seats Accessories for M2 shower/commode chairs

Standard seat Seat with extra large hole Lid

⇑All M2’s (except M2, 200 kg’s) can be delivered with either standard seat or seat with extra large hole. The seat is 4,5 cm thick and made with integrated soft pu foam. Bucket holder is integrated as well.. The seats are clicked off and on the chair frame. With this system you can easily change between the two seat types. Lid

comes as standard when you buy a chair.

Supersoft white foam seat White foam seat

⇑ Supersoft white foam seat made of polymer foam. Without cover.

Is tied on top of the normal seat with 4 strings. Comes with hole and without hole.

⇑White foam seat with plastic cover. All edges are welded.

Is tied on top of the normal seat with 4 strings

Seat with small hole

⇑ Liner with aperture in PU foam.

Can be placed directly on top of a standard M2 seat to provide a softer seating and a smaller aperture. Technical data and item no.: Please see back.


96

Technical data……..Accessories for M2 shower/commode chairs All measurements are approximately

Seats

Standard seat Seat with extra large hole Width 46,5 cm 46,5 cm

Length 44 cm 44 cm

Thickness Seat 4,5 cm. At bucket holder 9 cm. Seat 4,5 cm. At bucket holder 9 cm.

Length of hole 26,5 cm 26,5 cm + length of the extra hole on 11 cm

Width of hole 22 cm 22 cm. Width at the extra hole 11,5 cm

Material and construction. Wooden plate with metal mountings (bucket holder). With integrated pu foam all the way round

Wooden plate with metal mountings (bucket holder). With integrated pu foam all the way round

Mounting Is clicked of and on the chair frame Is clicked of and on the chair frame

Cleaning By disinfectioning: You can use; Ethanol and Propanoll solutions. Otherwise use ordinary non-alcoholic soaps. Max.70 degrees.

By disinfectioning: You can use; Ethanol and Propanoll solutions. Otherwise use ordinary non-alcoholic soaps. Max.70 degrees.

Weight 3,2 kg 3,0 kg

You decide the seat type when you order the chair. (Seat lid comes as standard)

Art number del: As spare part: Art nr.: 310340 (nb! When ordered as spare part it does not come with seat lid. Seat lid is ordered separately art nr. 310341)

As spare part: Art nr.: 310342 (nb! When ordered as spare part it does not come with seat lid. Seat lid is ordered separately art nr. 310343)

Supersoft white foam seat Width 46 cm

Length 41,5 cm

Thickness 3 cm

Length of hole 26 cm

Width of hole 19 cm

Material and construction. Supersoft white polymer foam. Without cover.

Mounting Is attached on top of the ordinary seat with the 4 strings.

Cleaning Is cleaned with soap water or alcohol. Max. 40 degrees. You can not wash it in a washing machine as it can go out of shape.

Weight 0,13 kg

Art number WITH hole 330018. WITHOUT hole 330022.

White foam seat Width 44,5 cm

Length 42 cm

Thickness 3 cm


Width of hole 18 cm

Material and construction. Soft foam pillow with white plastic cover, which is welded on all edges.

Mounting Is attached on top of the ordinary seat with the 4 strings.

Cleaning Is cleaned with soap water or alcohol. Max. 40 degrees. You can not wash it in a washing machine as it can go out of shape.

Weight 0,3 kg

Art number 330016

Seat with small hole Width 43 cm

Length 46 cm

Thickness 2,5 cm


Width of hole 17,5 cm

Material and construction. PU black

Mounting Are placed on top of the ordinary seat. Comes with plastic mountings, which are screwed, on the bottom. The plastic mountings are placed so they will fit into the hole of the ordinary seat.

Cleaning Is cleaned with soap water or alcohol. Max. 40 degrees.

Weight 1,6 kg

Art number

800178

24/1-11


97

Urine Funnel Accessories for M2 shower/commode chairs

Plastic Urine Funnel is for persons who have problems urinating into the toilet

The Urine Funnel is used by placing the narrow end facing down towards the toilet, so as to help prevent the person from urinating on the floor or on the toilet seat.

Wash at max. 80 degrees Celsius.


98


Urine Funnel Made from 2 mm ABS Plastic

Wash at max. 80 degrees Celsius.

Colour: Grey.

Width 8,2 cm

Depth 10,4 cm

Length 26,8 cm

Item no. 148861


99

Side supports Accessories for M2 shower/commode chairs

Depth adjustable side supports. The side supports are pushed into the holders without the use of tools.

Holders for side supports are standard on M2-tip. For other chairs you have to order a set of mountings

The side support pillows can if needed be turned upside down.

Holders for side supports (can also be used for mounting of cross guard)

Holders for side supports are standard on M2-tip. For other chairs you order this mounting set which is screwed on with the screws from the back rest.

Side supports holders can also be mounted together with head support holder.



100


Side supports P.u. foam pillow size. 15 x 22 cm

Pillow distance from handle bar 5,5 cm

Adjustment possibilities (measured from handle bar and inwards) 6 cm

Mounted without the use of tools Yes


Weight(one set 2 pieces) App. 1,2 kg

Mountings for side supports are standard on M2-tip. For other chairs you need a mounting set art no. 310227

Art no. One set (2 pieces): 310223

Article no. One for right side 310225

Article no. One for left side 310224

Side support/Cross guard holders Set with 2 pcs. which are mounted with the enclosed screws.

Metal: Stainless Steel

Weight (set with 2 pcs.): 0,5 kg

Holders are standard on M2-tip. For other chairs order as underneath

Article no. (set with 2 pcs.): 310227

Article no.: One for right side 310230

Article no.: One for left side 23/01-07

310231


101

Cross bar and cross guard Accessories for M2 shower/commode chairs

⇑ Crossbar to be placed on the two armrests to give extra support to the user. Is fastened with the two

rubber bands. Cannot be used on M2, 200 kg’s and M2, small, but on all other M2 chairs.

⇑ Cross guard to be placed so it gives support in front of the user. Cannot be used on M2 200 kg and M2 small , but on all other M2 chairs.

On M2-Tip holders are standard, on other chairs you need to mount a set of holders.

⇑ Holder for side supports/Cross guard Holders for cross guard are standard on M2-tip. For other chairs you order this mounting set, which is screwed on with the help

of the screws for the back rest. Cross guard holders can be mounted together with holders for head support.



102


Crossbar Total length: 62,5 cm

Diameter of foam part: App. 36 mm


Rubber bands: Rubber

Weight: 0,8 kg

Article no. (Cannot be used on M2, 200 kg’s and m2, small) 310228

Cross guard Total width: 62,5 cm

Depth: (from back rest to centre of guard) App. 37 cm

Diameter of foam part: App.34 mm


Weight : 1,6 kg

Article no. (Cannot be used on M2 200 kg and M2 small) 310229 For ordinary M2’s you need a set of holders article no. 310227 as well. On M2-Tip-Chairs holders on the chairs are standard. If you use a cross guard you cannot have side supports on the chairs as well.

Side support/Cross guard holders Set with 2 pcs. which are mounted with the enclosed screws.


Weight (set with 2 pcs.): 0,5 kg

Holders are standard on M2-tip. For other chairs order as underneath

Article no. (set with 2 pcs) 310227


103

Hip strap Accessories for M2 shower/commode chairs

⇑Hip strap as extra security for the user. (Opened/closed with velcro)

Can be mounted on all M2 chairs



104


Hip strap 2 pcs 5 cm wide nylon straps which are opened/closed with velcro. Are mounted without the use of tools

Right side strap is 82 cm long. Left strap is 58 cm long.

Fits a person with a diameter at maximum: 150 cm

Washable at Maximum 60 degrees

Weight (set ): 0,2 kg

Art no (set): Fits all chairs 330019


105

Drip stand Accessories for M2 shower/commode chairs

Drip stand with holder. Can be mounted on M2 shower-

/commode chair. (Can’t be used on M2-Tip)



106


Drip Stand

Height possibility 1,69-2,1 m

Weight (including drip stand) 1,5 kg

Weight (without drip stand) 0,2 kg

Do not fit on M2-Tip

Article number: Drip stand including bush/drip stand for M2 310050

Article number: Drip stand including bush for M2 9-1-07

310051


107

M2 mini shower/commode chairs M2 mini standard ..................................................................................................................... 108 M2 mini self-propelled with 20” wheels .................................................................................... 110 M2 mini el-tip. .......................................................................................................................... 112

Return to menu


108

M2 mini standard Height adjustable shower commode chair in stainless steel

M2 mini standard is designed for small size users.

CHILDREN AS WELL AS SMALL ADULTS.

The adjustments make the

shower commode chair a very flexible one, which makes it possible to keep for several years, while the user grows

older and taller.

(note! The chair is shown with accessories)

Height adjustable armrests.

15,5 cm - 28,5 cm From seat.

Backrest made of net-weave, is depth adjustable. The backrest is equipped

with 7 buckles, for maximum comfort, each separately

adjustable.

For enhanced manoeuvring and

comfort, the handles are height adjustable and can be angled 90 degrees to the sides

as well.

Seat with gap and full covering lid is standard.

The shower commode chair is equipped with 100 mm. Wheels and are height adjustable

in 5 positions.

The shower commode chair is prepared with holders for

headrest and side supporters.



109

Model M2 mini standard. Height adjustable shower commode chair. Stainless steel.

Technical data Seat heights App.: 40,5 cm-42,5 cm-44,5 cm-56,5 cm-48,5 cm

The lid adds 1,5 cm to the height. Seat width 46 cm Seat depth 37,5 cm Seat depth (measured from the back)

32,5 cm

Width between armrests 34 cm Height of armrest from seat 15,5 cm – 28,5 cm Height of back-rest (measured from seat)

From 5 cm to 46,5 cm

Heights (by handles) 8 positions. The heights are adjusted by clips (no tools). The handles can be angled to the sides for easier manoeuvring

Max. width (by armrests) 47,5 Free heights under seat 33,2 cm, 35,2 cm, 37,2 cm, 39,2cm, 41,2 cm, Max. Floor measurement (without footrests)

Length 53 cm

Weight 13,4 kg Max. Load 80 kg Wheels 100 mm wheels w/grey rubber and ball bearing. Double-acting brake

on all 4 wheels. Height adjustment Telescopic legs of stainless steel with 5 adjustments,

with 20 mm interval. Adjust with clips, no tools Seat/seat lid Seat: 35 mm thick P.U. foam

Seat lid: 15 mm P.U. foam Back rest Net weave adjustable with 7 buckles. Wash at 80 degrees Celsius do

not tumble dry.

Surface/metal powder lacquered and ALL STAINLESS STEEL Description: Item number: Shower/commode chair M2 mini with armrests going straight up. (incl. seat lid and hanging for bucket) With in seat and lid.

310500

ACCESORIES: (See brochures for more details) Height adjustable foot rests for M2 mini 310510 Long height adjustable foot rests M2 mini 310049 Calf Rest 310226 Plastic bucket for M2 mini 310516 Side supporters M2 mini. (Height- depth and width) 310512 Headrest M2 mini. (Height – Depth – angel – adjustable).The head rest can bend smaller or bigger)

310511

Hip strap M2 mini. (Is tightened with Velcro) 310515

05/11/04


110

M2 mini self-propelled with 20” wheels Height adjustable shower commode chair in stainless steel

M2 mini with self-propelled wheels

is designed for small users; CHILDREN AS WELL AS SMALL

ADULTS.

The self-propelled wheels give the user more possibilities of being independent from nurses and

further help.

(nb! The chair is shown with accessories)


15,5 cm - 28,5 cm

From seat.

Backrest made of net-weave, is depth

adjustable. The backrest is equipped

with 7 buckles, for maximum comfort, each separately adjustable.



Seat with gap and full covering lid is standard

The chair is height adjustable

in 3 positions.


safety.



111

Model M2 mini, self-propelled with 20” wheels.

Height adjustable shower/commode chair. STAINLESS STEEL

Technical data:

Seat height: App.: 42 cm, 44 cm, 51 cm The lid ads 1,5 cm to the height.

Seat width 46 cm

Seat depth 37,5 cm

Seat depth (measured from the back) 32,5 cm


Height of armrest from seat 15,5 to 28,5 cm

Height of back-rest (measured from seat)


Height adjustable handles 8 positions. The heights are adjusted by clips (no tools). The handles can be angled to the sides for easier manoeuvring

Heights (by handles) 121 cm, when chair and handles are in most extended positions

Max. Width (by wheels 64 cm

Free heights under seat 35,5 cm, 37,5 cm, 44,5 cm


69,5 cm

Weight 17,4 kg

Max. load 80 kg

Wheels

Rear wheels: Spokes, axe and bearings is of stainless steel. The wheels are of massive PUR

Front wheels: 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on both wheels.

Height adjustable wheels Front: Telescopic stainless steel. Height is adjusted with clips (no tools).

Rear: with the help of wrench, the bushings on the back wheels. Brakes: Use a wrench to move the brakes to or away from the wheels

Anti-tip safety: Height is adjusted by moving clips (no tools).

foam Seat: 2.5 cm P.U. Foam. Seat cover: 1.5 cm P.U. Foam Armrests: 2.5cm P.U. Foam

Back rest Net weave adjustable with 7 buckles. Wash at 80 degrees Celsius do not tumble dry.

Metal/surface; Frame Powder lacquered and ALL STAINLESS STEEL

Description Item no: ISO nr.:

Shower/Commode Chair M2 mini with self propelled wheels, open seat and angel adjustable handles (incl. Lit and prepared for bucket)

310501

Accessories: (for details, see Brochure)

Height adjustable foot rests M2 mini 310510

Long height adjustable foot rests M2 mini 310049

Bucket M2 mini 310516

Side supporters M2 mini. (Height- depth and width) 310512

Headrest M2 mini. (Height – Depth – angel – adjustable). The head rest can bend smaller or bigger)

310511

Hip strap M2 mini. (is tightened with Velcro) 310515

Calf rest (White Nylon net weave with Velcro) 310226

05/11/04


112

M2 mini el-tip. Height adjustable shower commode chair in stainless steel

M2 mini el-tip is designed for small size users. CHILDREN AS WELL AS SMALL ADULTS.

For users with disturbed balance and without the

ability to sit in a regular shower/commode chair. Or for people who tend to fall/slide forward in a regular shower/commode chair, this chair exhibits a smooth and uninterrupted movement between its maximum positions, the action assures complete comfort and

convenience for the user.

The smooth tilt and the wide range of accessories available, ensures safety while showering (and using

the toilet function). The waterproof motor (IP 65) can tilt the seat 37

degrees backwards and 7 degrees forward.

The shower commode chair is height adjustable in 5 positions:

46 cm, 48 cm, 50 cm, 52 cm & 54 cm above the ground.

When tilted forward, the front edge of the seat is just

44 cm from the floor, when the shower/commode chair is in lowest position. This makes it easier to sit

for users who are able to stand themselves.

Backrest, made of net-weave, is depth adjustable. The backrest is equipped with 7 buckles, for

maximum comfort, each separately adjustable.

Seat with gap and full covering lid is

standard.



113

Model M2 mini el-tip. Height adjustable shower/commode chair. STAINLESS STEEL.

Technical data:

Seat heights app. 46 cm-48 cm-50 cm-52 cm-54 cm

The lid ads 1,5 cm to the height. Seat width 46 cm

Seat depth 37.5 cm



Heights of armrest from seat 15.5 to 28.5 cm



Handles height adjustable 8 positions. The height is adjusted by clips (no tools). The handles can be angled to the sides for easier manoeuvring

Max. height 126 cm, when chair and handles are in most extended pos. Biggest outside width (by motor) 59.5 cm

Free height under seat 39 cm-41 cm-43 cm-45 cm-47 cm

Full length (without footrests) 65.5cm

Vægt 23.6 kg

Max. Load 80 kg

Wheels 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on all 4 wheels

Height adjustments Telescopic legs of stainless steel with 5 adjustments, with 20 mm interval. Adjust with clips, no tools

Back rest Net weave adjustable with 7 buckles. Washable at 80 degrees. Do not tumble dry.

Foam parts Seat: 2.5 cm P.U. Foam. Seat cover: 1.5 cm P.U. Foam Armrests: 2.5cm P.U. Foam

El-motor/ Battery system

Continuously variable blockable motor. Batteries can, under normal circumstances activate the tilting function 30-40 times before recharging is needed. Tightness = IP66 (Dustproof and protected against dust and squirt/rays of water).

Metal/surface; Frame Powder lacquered and ALL STAINLESS STEEL Description: Item no: ISO no.:

Shower/Commode chair M2 mini el-tip, open seat and adjustable handles (angles/heights) (incl. Seat prepared for bucket and full covering lid).

310502






Headrest M2 mini. (Height – Depth – angel – adjustable).The head rest can bend smaller or bigger)

310511



11/1/11


114

M2 mini el-tip Height adjustable shower commode chair in stainless steel

Armrests are equipped with locks.



For enhanced maneuvering and

comfort, the handles are height adjustable and can

be angled 90 degrees to the sides as well.

Backrest made of net-weave, is depth

adjustable. The backrest is equipped with 7

buckles, for maximum comfort,

each separately adjustable

Seat with gap and full covering lid is

standard

Remote control for activating the tilting

function (Tilting: 7 degrees

forward and 37degrees backwards).

The shower commode chair is equipped with 100 mm. Wheels and

are height adjustable in 5

positions

The shower commode chair is

prepared with holders for headrest and side supporters


115

Model M2 mini el-tip. Height adjustable shower/commode chair. STAINLESS STEEL.

Technical data:

Seat heights app. 46 cm-48 cm-50 cm-52 cm-54 cm

The lid ads 1,5 cm to the height. Seat width 46 cm

Seat depth 37.5 cm



Heights of armrest from seat 15.5 to 28.5 cm



Handles height adjustable 8 positions. The height is adjusted by clips (no tools). The handles can be angled to the sides for easier manoeuvring

Max. height 126 cm, when chair and handles are in most extended pos. Biggest outside width (by motor) 59.5 cm

Free height under seat 39 cm-41 cm-43 cm-45 cm-47 cm

Full length (without footrests) 65.5cm

Vægt 23.6 kg

Max. Load 80 kg

Wheels 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on all 4 wheels

Height adjustments Telescopic legs of stainless steel with 5 adjustments, with 20 mm interval. Adjust with clips, no tools

Back rest Net weave adjustable with 7 buckles. Washable at 80 degrees. Do not tumble dry.

Foam parts Seat: 2.5 cm P.U. Foam. Seat cover: 1.5 cm P.U. Foam Armrests: 2.5cm P.U. Foam

El-motor/ Battery system

Continuously variable blockable motor. Batteries can, under normal circumstances activate the tilting function 30-40 times before recharging is needed. Tightness = IP66 (Dustproof and protected against dust and squirt/rays of water).

Metal/surface; Frame Powder lacquered and ALL STAINLESS STEEL Description: Item no: HMI no: ISO no.:

Shower/Commode chair M2 mini el-tip, open seat and adjustable handles (angles/heights) (incl. Seat prepared for bucket and full covering lid).

310502






Headrest M2 mini. (Height – Depth – angel – adjustable).The head rest can bend smaller or bigger)

310511



11/1/11


116

Accessories for M2 mini shower/commode

chairs Hip strap .................................................................................................................................................. 117 Side supports ........................................................................................................................................... 119 Calf rest ................................................................................................................................................... 121 Commode pan ......................................................................................................................................... 123 Foot rests ................................................................................................................................................. 125 Head supports ......................................................................................................................................... 127

Return to menu


117

Hip strap

Accessories for M2 mini shower/commode chairs

Hip strap. Open and close with Velcro.



118

Technical data M2-Mini accessories

Hip strap 2 pieces of each 5 cm wide nylon band. Open and close with Velcro. Is Mounted without the use of tools.

Right band is 82 cm long. Left is 58 cm long.

Wash at Max. 60°C

Weight (set) 0,2 kg

Item no.: 310515


119

Side supports

Accessories for M2 mini shower/commode chairs

Side supports with soft and comfortable P.U.

foam pads. Can be adjusted in

height, depth and width without the use of

tools.



120


Side supports P.u. foam size. 12 x 16,5 cm

Height adjustable 5,5 cm

Adjustments of distance from centre of chair(from each side) 4,5 cm

Depth adjustment 4,5 cm


Weight (one set, two pieces.) App. 1,2 kg

Item no.: For one set (two pieces): 310512

Item no. For right side: 310514

Item number for left side 310513


121

Calf rest Accessories for M2 mini shower/commode chairs

Calf rest made in white net weave. Depth adjustable with Velcro.



122


Calf Rest Height of calf rest 16,5 cm

Depth adjustable Yes

Wash at Max. 80°C

Made of washable plastic with net weave and adjustable Velcro band

Weight App.:. 0,3 kg

Item no.: 310226

Item no.: 310515


123

Commode pan Accessories for M2 mini shower/commode chairs

.

Bucket Especially fitted for the M2 mini seat



124


Commode pan with lid for M2 mini Size of opening 19,5 cm x 28,5

Depth 10.5 cm

Weight 0,5 kg

Item no.: 310516


125

Foot rests Accessories for M2 mini shower/commode chairs

Footrests for M2-mini. Height

adjustable in 7 positions.

Regular standard M2 footrests

Also fit our M2 Mini. Is suitable in situations

where the user requires a footrest with

longer adjustments possibilities.



126


Height adjustable footrests M2 mini

7 positions, short length from seat to footrests.

2 cm between each position

Weight (set of two). 1,1 kg

Clips without the use of tools adjust heights. Hangers fare in stainless steel, the footrests plates are in hard plastic

Item no.: 310510

Long height adjustable footrests for M2 mini

7 positions, Further distance from seat to footrests.

2 cm between each position

Weight (set of two). 1,1 kg

Clips without the use of tools adjust heights. Hangers fare in stainless steel, the footrests plates are in hard plastic

Item no.: 310049


127

Head supports Accessories for M2 mini shower/commode chairs

⇐ Ord. Head support. Can be adjusted in height and width on the pu foam pillow. Holders for head

support are standard on M2-tip.

For other chairs you have to order a

set of mountings

⇐ Height, depth, angle and width adjustable

head support.

Holders for head support are

standard on M2-tip. For other chairs you have to order a

set of mountings

⇐The pu foam pillow is a

flexible type which can be adjusted in

width.

⇐ Head support

shown mounted on an ordinairy M2

chair. Holders for head

support are standard on M2-tip. For other chairs you have to

order a set of mountings

Super Soft height and depth adjustable headrest.

Super Soft height adjustable headrest.



128

Technical data; Accessories for M2 shower/commode chairs

Ordinary head support Height adjustment. Bottom to top (Measured from the metal bar between the handles to the centre of the head support)

6,5 cm-32,5 cm


8,5 cm






Weight App. 1 kg


Height and depth adjustable head support Height adjustment. Bottom to top (Measured from the metal bar between the handles to the centre of the head support)

2,5 cm- 35 cm


3 cm-16,5 cm






Weight Ca. 1,5 kg


Head support + mounting set (for ordinary M2’s) To be mounted on ordinary M2 chairs. Is screwed on with the help of the screws for the back rest

Metal Stainless steel + ord. steel

Weight App. 2 kg

Art no.: Height and depth adjustable head support including mounting set 310059

Art no.: Ordinary head support including mounting set 310087

Art no.: Mounting set (without head support) 310320

Super Soft height adjustable headrest. Height adjustment. Bottom to top (Measured from the metal bar between the handles to the centre of the head support)

6,5 cm-32,5 cm


8 cm





Weight Ca 0,8 kg


Super Soft height and depth adjustable headrest. Height adjustment. Bottom to top (Measured from the metal bar between the handles to the centre of the head support)

2,5 cm- 35 cm


3 cm-16,5 cm





Weight Ca. 1,0 kg


Documents

Lynch Healthcare M2 Shower Chair Range