M2D2017 Program - UPM2D2017 Albufeira/Portugal 7th International Conference on MECHANICS AND MATERIALS IN DESIGN Albufeira/Portugal, 11-15 June 2017 - 1 - PROGRAM

M2D2017 Albufeira/Portugal

7th International Conference on

MECHANICS AND MATERIALS IN DESIGN Albufeira/Portugal, 11-15 June 2017

M2D2017

PROGRAM

Institutional Sponsors

University of Porto | University of Toronto | University of Algarve




- 1 -

PROGRAM

MAIN TOPICS

A - Computational Mechanics. (Sessions: 2A-6A) G - Mechanical Design and Prototyping. (Sessions: 1F-2F)

B - Experimental Mechanics. (Sessions: 3B-4B) H - Biomechanical Applications. (Session: 1E)

C - Fatigue and Fracture. (Sessions: 1D-4D) I - Civil Engineering Applications. (Sessions: 5E-7E)

D - Composite and Advanced Materials. (Sessions: 4C-8C) J - Impact and Crashworthiness. (Sessions: 5B-8B)

E - Nanotechnologies and Nanomaterials. (Sessions: 8D-9D) L - Ind. Engineering and Management. (Session: 9C)

F - Tribology and Surface Engineering. (Sessions: 3F) O -Open Forum on Engineering Education (Tuesday, 09:30-11:00)

THEMATIC SYMPOSIA

1. EXPERIMENTAL MECHANICS IN DESIGN, promoted by J.F. Silva Gomes (FEUP/U.Porto, Portugal) and Mário A.P. Vaz (FEUP/U.Porto, Portugal). (Session: 1B)

2. FAILURE ANALYSIS, DIAGNOSTICS AND PREVENTION, promoted by Shaker A. Meguid (MADL/U. Toronto, Canada). (Session: 5D)

3. COMPOSITE MATERIALS: THEORY, EXPERIMENTS AND APPLICATIONS, promoted by Shaker A. Meguid (MADL/U. Toronto, Canada). (Sessions: 1C-2C)

4. GRAPHENE AND CARBON NANOTUBES, promoted by Gil Gonçalves (U. Aveiro, Portugal). (Session: 3C)

5. ECONOMY, MANAGEMENT AND TECHNOLOGY IN CONSTRUCTION, promoted by Álvaro Azevedo (LNEC, Portugal) and Maria João Silva (LNEC, Portugal). (Sessions: 8E-9E)

6. MECHANICAL CONNECTIONS, promoted by Dario Croccolo (University of Bologna, Italy). (Session: 2B)

7. GREEN TRIBOLOGY: FUNDAMENTALS, DEVELOPMENTS AND CHALLENGES, promoted by Noritsugu Umehara (Nagoya University, Japan). (Session: 4F)

8. OPTIMIZATION AND UNCERTAINTY QUANTIFICATION, promoted by Carlos C. António (U.Porto, Portugal) and Catarina castro (U.Porto, Portugal). (Sessions: 6F-7F)

9. COMPUTATIONAL MECHANICS AT VARIED LENGTH SCALE, promoted by Yan Liu (Tsinghua University, China) and Xiong Zhang (Tsinghua University, China). (Session: 1A)

10. DYNAMIC FAILURE AND CRASHWORTHINESS, promoted by Wojciech Moćko (Motor Transport Institute, Poland) and Leopold Kruszka (Military University of Technology, Poland). (Session: 9B)

11. CARDIOVASCULAR AND ORTHOPAEDIC COMPUTATIONAL DESIGN, promoted by Luisa C. Sousa (U.Porto, Portugal) and Catarina F. Castro (U.Porto, Portugal). (Session: 2E)

12. SUSTAINABLE ENERGY SYSTEMS, promoted by Clito F. Afonso (U.Porto, Portugal). (Session: 7D)

13. FIRE AND STRUCTURAL ENGINEERING, promoted by Alberto Meda (U. Rome “Tor Vergata, Italy) and Paulo A.G. Piloto (IPB, Portugal). (Sessions: 8F-9F)

14. QUALITY MANAGEMENT: THEORY, APPLICATIONS AND CASE STUDIES, promoted by Laura Bravi(Politics University of Urbino Carlo Bo, Italy), Federica Murmura (Politics University of Urbino Carlo Bo, Italy) and Gilberto Santos (College of Design Polytechnic Institute Cávado Ave, Portugal). (Session: 5F)

15. A PROBABILISTIC APPROACH IN THE NUMERICAL SIMULATION OF DEFORMATION, FRACTURE AND FRAGMENTATION OF SOLIDS, promoted by Alexander V. Gerasimov (Tomsk State University, Russia) and Sergey A. Zelepugin (Tomsk State University, Russia). (Session: 6D)

16. MECHANICS AND MATERIALS IN THE REHABILITATION OF ORAL AND MAXILOFACIAL STRUCTURES, promoted by J.C. Reis Campos (FMDUP/U.Porto, Portugal), Mário A.P. Vaz (FEUP/U.Porto, Portugal) and André Correia (HSIV/U. Católica, Portugal). (Session: 3E)

17. MECHATRONICS DESIGN: APPLICATIONS AND CASE STUDIES, promoted by Luís F. Silva (U.Minho, Portugal), Eurico Seabra (U.Minho, Portugal), Hélder Carvalho (U.Minho, Portugal) and Gilberto Santos (College of Design Polytechnic Institute Cávado Ave, Portugal). (Sessions: 8A-9A)

18. DURABILITY, DAMAGE AND MANUFACTURING PROCESSES, promoted by Teresa Morgado (FCT/UNL, Portugal), Carla Machado (FCT/UNL, Portugal), Pamies Teixeira (FCT/UNL, Portugal) and Telmo Santos (FCT/UNL, Portugal). (Session: 7A)

19. STRUCTURAL DYNAMICS AND CONTROL SYSTEMS: THEORY, EXPERIMENTS AND APPLICATIONS, promoted by Rui C. Barros (U. Porto, Portugal) and Manuel Braz Cesar (IPB, Portugal). (Session: 4E)




- 2 -

Institutional Sponsors

FEUP University of Porto

Portugal

MADL University of Toronto

Canada

UAlg/ISE University of Algarve

Portugal

Co-Chairs

J.F. Silva Gomes (University of Porto)

Shaker A. Meguid (University of Toronto)

Organizing Committee

Carlos C. António, Catarina Castro, Clito F. Afonso, José M. Cirne

J. Reis Campos, M. Carlos Nunes, Mário A.P. Vaz, Paulo G. Piloto

International Scientific Committee

Aben, H. (Estonia)

António, C.C. (Portugal)

Banks-Sills, L. (Israel)

Barros, R.C. (Portugal)

Bremand, F. (France)

Croccolo, D. (Italy)

Goldak, J. (Canada)

Guagliano, M. (Italy)

Hess, Peter (Germany)

Kaleta, Jerzy (Poland)

Kuhn, Erik (Germany)

Meguid, S.A. (Canada)

Mileiko, S.T. (Russia)

Mines, R. (UK)

Morimoto, Y. (Japan)

Ng, T.Y.(Singapore)

Nowell, David (UK)

Owen, D.R.J. (UK)

Pieczyska, E. (Poland)

Reddy, J.N. (USA)

Ruiz, Gonzalo (Spain)

Semenski, D. (Croatia)

Silva Gomes, J.F. (Portugal)

Slocum, Alexander (USA)

Sousa, Nelson (Portugal)

Tröster, T. (Germany)

Umehara, N. (Japan)

Van Hemelrijck, D. (Belgium)

Van Tooren, M. (USA)

Weng, G.(USA)

Xu, H. (China)

Yoshino, Masahiko (Japan)

Zhang, X. (China)

Advisory Committee

Alexopoulos, N. (Greece)

Azevedo, Alvaro (Portugal)

Baptista, João S. (Portugal)

Bravi, Laura (Italy)

Braz Cesar, M. (Portugal)

Campos, Vicente (Portugal)

Carvalho, Hélder (Portugal)

Correia, André (Portugal)

Cunha, Alvaro (Portugal)

Dinis, Lúcia (Portugal)

Fonseca Elza. (Portugal)

Gerasimov, A. (Russia)

Gonçalves, Gil (Portugal)

Kruszka, L. (Poland)

Lino, Jorge (Portugal)

Liu, Yan (China)

Lino, Jorge (Portugal)

Machado, Carla (Portugal)

Meda, Alberto (Italy)

Mocko, W. (Poland)

Morgado, Teresa (Portugal)

Murmura, Federica (Italy)

Pappalettere, C. (Italy)

Santos, Gilberto (Portugal)

Santos, Telmo (Portugal)

Seabra, Eurico (Portugal)

Seabra, Jorge (Portugal)

Silva, Luis (Portugal)

Silva, Maria J. (Portugal)

Sousa, Hipólito (Portugal)

Sousa, Luisa (Portugal)

Teixeira, Pamies (Portugal)

Turmanidze, Raul (Georgia)

Varum, Humberto (Portugal)

Wang, Changguo (China)

Zelepugin, S. (Russia)

Conference Secretariat

Eduarda Jesus, Lurdes Catalino

with the support of

ABREU-PCO, Professional Congress Organizer (http://pco.abreu.pt) Mercatura Conference System (http://www.mercatura.pt)




- 3 -

PROGRAM

SUNDAY, 11 JUNE 2017

15:00-18:00 EARLY-BIRD REGISTRATION AND WELCOME DRINK Lobby

MONDAY, 12 JUNE 2017

O7:45-08:45 REGISTRATION Lobby

08:45-09:15 OPENING SESSION Salgados I+II

O9:15-10:00 KEYNOTE LECTURE (I) Salgados I+II

Professor David Nowell (University of Oxford, UK)

DESIGN AGAINST FATIGUE FAILURE: CHALLENGES AND SOLUTIONS

Chair: Prof. Shaker A. Meguid (U.Toronto, Canada)

10:00-10:30 COFFEE BREAK Coffee Lounge

10:30-11:45 PAPERS SESSION - 1 All Rooms

1A (Room Salgados I+II)

Symp_9 Chair: Yan Liu

1B (Room Salgados III)

Symp_1 Chair: Paulo Piloto

1C (Room Salgados IV)

Symp_3 Chair: S.A. Meguid

1D (Room Galé I)

Topic_C Chair: Rainer Wagener

1E (Room Galé II)

Topic_H Chair: Rosaire Mongrain

1F (Room Galé III)

Topic_G Chair: Gilmar Silva

Ref: 6417

MODELING DUAL-PHASE STRUCTURES: A DREAM.3D-ABAQUS COUPLING. Edison Bonifaz, Juan Baus.

Ref: 6572

AXISYMMETRIC BUCKLING AND STRAIN DISRIBUTION OF SHALLOW SPHERICAL CAPS WITH FREE EDGES. Devin Singh, Jacqueline Bridge.

Ref: 6453 AN APPROXIMATE ANALYTICAL APPROACH FOR NONLINEAR THERMODYNAMIC PROBLEM OF FGM SHALLOW SPHERICAL SHELLS WITH TIME DEPENDENT PARAMETERS. Yulia Fatieieva, V.Z. Gristchak.

Ref: 6415

NEW CORROSION MODEL TO PREDICT STEEL STRENGTH. Maciej Taczala, Rachid Dami.

Ref: 6540

CONCEPTUAL DESIGN METHOD FOR THE DEVELOPMENT OF AN ARTICULAR ORTHOSIS - CAMPTOCORMIA BRACE. Ricardo Duarte, Leonardo Fernandes, Michel Mesnard, Philippe Wentzy, Mathieu De Seze.

Ref: 6430 (Invited Paper)

ELECTROMAGNETIC FORMING OF THIN STEEL SHEETS FOR THE PRODUCTION OF METAL PACKAGING COMPONENTS. Inês Oliveira, Geoffrey Taber, Ana Reis.




- 4 -

Ref: 6452

ATOMISTIC MODELING AND STRENTH CALCULATIONS OF Ni-Al SUBMICRON AND NANOSIZED COMPOSITES. Alla V. Balueva, Ilia N. Dashevskiy.

Ref: 6792

EXPERIMENTAL EVALUATION OF STRUCTURAL GLASS ELEMENTS UNDER COMPRESSION. Roman Kalamar, Martina Eliášová.

Ref: 6462 NDE OF HONEYCOMB STRUCTURE: A COMPARATIVE STUDY OF INFRARED AND TERAHERTZ IMAGING. Waldemar Swiderski.

Ref: 6512

TEST METHOD FOR LONGITUDINAL PERFORMANCE OF IMPACT SURFACING MATERIALS. David Eager, Chris Chapman, Anh Vu Nguyen.

Ref: 6576

MECHANICAL ANALYSIS OF A STRAIN WEARABLE SENSOR. Carlos Gonçalves, Alexandre F. Silva, João Gomes, Ricardo Simões.

Ref: 6526

DESIGN OF A MULTIPLE EXPERIMENTAL SYSTEM WITH 3-AXIAL ACCELERATION AND TEMPERATURE. Qian Liu, Yang Min.

Ref: 6468

The USE OF THE MATERIAL POINT METHOD FOR EVALUATING IMPACT-RESISTANT DESIGNS OF COMPOSITE SYSTEMS. Zhen Chen, Jun Tao, Luoyu R. Xu.

Ref: 7081

INVESTIGATING BULGE CORRECTION IN THE CONTOUR METHOD FOR RESIDUAL STRESS MEASUREMENT OF A COMPACT TENSION WELD SPECIMEN. Beverly Stewart, John Bouchard, Michael B. Prime, Foroogh Hosseinzadeh.

Ref: 6470 THE EFFECT OF THE STANDARD DEVIATION AND THE AVERAGE LOAD OF A SPECTRUM LOADING ON LIFETIME OF A COMPOSITE LAMINATES. Mohammed Bousfia, Mohammed Aboussaleh, Brahim Ouhbi.

Ref: 6520

ACCELERATED FATIGUE TESTING TO EVALUATE THE FATIGUE LIFE CURVE. Rainer Wagener, Tobias Melz.

Ref: 6713I

NFLUENCE OF DRILL BIT DIAMETER ON DRILLING OF POLYURETHANE FOAMS. Tiago A.S. Teixeira, Maria G. Fernandes, Lucas D. Azevedo, Elza M.M. Fonseca, Renato N. Jorge.

Ref: 6531

PARAMETRIC INVESTIGATION OF FREE VIBRATION OF DOUBLE LAP COMPOSITE JOINTS. Elias Salloum, Georges Challita, Khaled Khalil.

Ref: 6485

BIRD STRIKE SIMULATION BY ADAPTIVE SHELL MATERIAL POINT METHOD. Bo Wu, Xiong Zhang, Zhenpeng Chen.

Ref: 7082

ASYMMETRIC CUTS IN THE CONTOUR METHOD FOR RESIDUAL STRESS MEASUREMENT. A. Achouri, P.J. Bouchard, Saurabh Kabra, F. Hosseinzadeh.

Ref: 6554 NUMERICAL-EXPERIMENTAL CORRELATION OF COMPOSITE LAMINATES FOR AUTOMOTIVE APPLICATIONS. Luca Cavazzoni, Fabio Calacci, Ignazio Lo Presti, Sara Mantovani.

Ref: 7047

MIXED MODE CRACK PROPAGATION: NUMERICAL AND EXPERIMENTAL STUDY. M.A.C. Ferreira, S.M.O. Tavares, J. Belinha, P.M.S.T. de Castro.

Ref: 6851

INCORPORATION OF BIOMATERIALS (PROPOLIS AND CAMPHOR) IN TOPICAL ANTISEPTIC FORMULATIONS FROM DISTILLED FATTY ACIDS OF SOYBEAN OIL AND PALM OIL. Didouche Yasmina-fadhéla, Djeziri Mourad.

Ref: 6537

AN ENHANCED RHOMBUS-TYPE COMPLIANT MECHANISM WITH LARGE DISPLACEMENT AND HIGH NATURAL FREQUENCY. Qian Liu, Min Yang.

Ref: 6585

POINT-BASED MESO-SCALE MODELING FOR WOVEN COMPOSITES. Yan Liu, Ping Liu, Xuena Si, Xiong Zhang.

Ref: 6676

A NEW MULTI-MATERIAL DIRECT LASER SINTERING PROCESS FOR ADVANCED MATERIALS DESIGN APPROACHES. José Pires, Óscar Carvalho, Nuno Alves, Artur Mateus, Filipe S. Silva.



Topic_A Chair: José Curiel Sosa


Symp_6 Chair: D. Croccolo



2D (Room Galé I)

Topic_C Chair:David Nowell

2E (Room Galé II)

Symp_11 Chair: C. Castro

2F (Room Galé III)

Topic_G Chair: Ana Reis

Ref: 6544

HYBRID MATHEMATICAL/ISOGEOMETRIC ANALYSIS OF PIEZOELECTRIC ENERGY HARVESTER COMPOSITE UNDER DYNAMIC BENDING. Mahesa Akbar, Jose L. Curiel Sosa.

Ref: 6631

NUMERICAL AND EXPERIMENTAL CHARACTERIZATION OF A RAILROAD SWITCH MACHINE. Dario Croccolo, Massimiliano De Agostinis, Stefano Fini, Giorgio Olmi.

Ref: 6587

MESOMECHANICAL ANALYSIS OF A COMPOSITE CONSIDERING INTERNAL CONTACT INTERACTION. Volha Yakubovich, Alexandr Shimanovsky.

Ref: 6546

MATHEMATICAL MODEL FOR PREDICTING THE DURABILITY OF COMPOSITE MATERIALS IN FATIGUE TESTS. T.D. Karimbaev.

Ref: 6611

IMPORTANCE OF BLOOD ELASTIC PROPERTY IN THE HEMODYNAMICS AT MACRO-SCALE - NUMERICAL STUDY. Sónia I.S. Pinto, João B.L.M. Campos.

Ref: 6620

COOLING FINS SHAPE OPTIMIZATION OF LED LUMINAIRE BODY. Alexander Janushevskis, Ivo Vaicis.

Ref: 6548

DESIGN OF A CRUSHABLE THERMAL PROTECTION SYSTEM FOR THE EARTH RE-ENTRY CAPSULE. João Carvalho, Carlos Ribeiro, Ricardo Sá, Angelo Marques, Filipa Carneiro, Paulo Chaves, Nuno Marques, Edgar Carrolo, Paulo J. Antunes, Julio C. Viana, Denis Rebuffat, Ivan Ngan.

Ref: 6640

FATIGUE CHARACTERIZATION OF ALUMINIUM WELDED JOINTS. Dario Croccolo, Massimiliano De Agostinis, Stefano Fini, Giorgio Olmi.

Ref: 6628

A NEW JOINT OF FRP DESIGN FOR A BUS STRUCTURE. Alejandro Quesada, Maria Jesus Boada, Agustin Chiminelli, Ruben Breto, Miguel Angel Martinez, Pedro Galvez, Daniel Garcia-Pozuelo, Ester Olmeda, Vicente Diaz.

Ref: 6569

STRENGTH ANALYSIS OF LASER BEAM WELDED STEEL-ALUMINIUM-JOINTS FOR MARITIME LIGHT WEIGHT APPLICATIONS. Benjamin Moeller, Rainer Wagener, Tobias Melz, Rabi Lahdo, André Springer, Stefan Kaierle, Ludger Overmeyer.

Ref: 6678

NUMERICAL STUDY OF ATHEROGENESIS RISK ASSOCIATED TO DIFFERENT STENOTIC ARTERIES. Sónia I.S. Pinto, Catarina F. Castro, Luisa C. Sousa, João B.L.M. Campos.

Ref: 6669

THE POTENTIAL OF NATURALLY GROWN BENT BAMBOO STRUCTURES: QUANTIFYING THE EFFECT OF THERMAL BENDING ON THEIR TENSILE STRENGTH. A.L. Beger, F. Merkord, M. Loewer, M. Schaefer, G. Jacobs, F. Moser, M. Trautz, J. Reimer, A. Wormit, B. Usadel, C. Kaempfer, T.B. Seiler, H. Hollert.




- 5 -

Ref: 6551

FLUTTER OF TOW-STEERED COMPOSITE LAMINATES UNDER SUPERSONIC FLOW. Xiaosui Ouyang, Yi Liu.

Ref: 6647

ON THE EVALUATION OF THE PEAK CONTACT STRESSES IN A PRESS-FITTED SHAFT-HUB COUPLING SUBJECT TO BENDING. Enrico Bertocchi, Sara Mantovani, Andrea Baldini, Antonio Strozzi.

Ref: 6665

COMPARISON OF MEASURED FIBER ORIENTATIONS IN FIBER CONCRETE WITH PREDICTIONS BY CFD SIMULATIONS. Heiko Herrmann, Oksana Goidyk, Andres Braunbruck, Rasmus-R. Marjapuu, Tanel Tuisk.

Ref: 6583

FATIGUE ASSESSMENT UNDER CONSIDERATION OF SIZE EFFECTS AND TRANSIENT MATERIAL BEHAVIOUR. Mathias Hell, Rainer Wagener, Heinz Kaufmann, Tobias Melz, Antonio Fernandes.

Ref: 6768

FLUID-STRUCTURE INTERACTION MODELING OF BLOOD FLOW IN A NON-STENOSED COMMON CAROTID ARTERY BIFURCATION. Luisa C. Sousa, Catarina F. Castro, Carlos C. António, Elsa Azevedo.

Ref: 6726

THE EFFICIENCY OF ROTORS WITH VARIABLE GEOMETRY PARAMETERS IN THE DYNAMICS AND CONSUMPTION, IN AVIATION AND HIGH POWER WIND STATIONS. Raul Turmanidze, Irina Shkurupskaya, Giorgi Popkhadze.

Ref: 6557

BANDGAP DETERMINATION IN STRUCTURES COMPOSED BY ORDERED BEAMS CLAMPED TO A PLATE SUBSTRATE. Óscar Serrano, Ramón Zaera, José Fernández-Sáez.

Ref: 6846

TRANSVERSE FATIGUE CHARACTERISTICS OF BOLTED JOINTS TIGHTENED THIN PLATES. Shinji Hashimura, Jyunpei Maekawa, Takuya Niiyama Niiyama.

Ref: 6688

METHODICAL DEVELOPMENT OF AN OPTIMIZED PRODUCT EMERGENCE PROCESS FOR FIBER REINFORCED POLYMERS. Jonathan Schmidt, Georg Jacobs, Henrik Alpmann, Helena Heuser.

Ref: 6599

EVALUATING THE INFLUENCE OF SHRINKAGES IN NODULAR CAST IRON ON FATIGUE STRENGTH. Christoph Bleicher, Rainer Wagener, Tobias Melz.

Ref: 6935

DEVELOPMENT OF A NEW HUBLESS VENTRICULAR ASSIST DEVICE. Rosaire Mongrain, Young Hoon Chung, Toufic Azar, Renzo Cecere.

Ref: 6743

STRUCTURAL DEVELOPMENT OF A WIRE DRAWING AND EXTRUSION HYDRAULIC BENCH. Gilmar C. Silva, Ana C.S. Couto, Alysson L. Vieira, Ernane V. Silva, Norberto Martins.

Ref: 6972

A DECISION SYSTEM FOR PLAQUE DETECTION IN THE CAROTID ARTERY. Catarina F. Castro, Luisa C. Sousa, Carlos C. António.

Ref: 6986

ADVANCED MATERIAL DEVELOPMENT AND DESIGN OPTIMIZATION FOR IMPROVED PROPERTIES IN ADDITIVE MANUFACTURING PROCESS. Lukasz Matysiak, Michal Kozupa, Bogdan Dybala.

13:00-14:30 LUNCH Restaurant



Topic_A Chair: M. Toorani


Topic_B Chair: Elzbieta Pieczyska


Symp_4 Chair: Gil Gonçalves

3D (Room Galé I)

Topic_C Chair:Benjamin Moeller

3E (Room Galé II)

Symp_16 Chair: J. Reis Campos

3F Room Galé III)

Topic_F Chair: Rolf Wäsche

Ref: 6568

EVALUATION OF A FE MODEL FOR THE MECHANICAL ANALYSIS OF A COMPLEX THIN-WALL CFRP STRUCTURE. J.C. Riol, E. Casarejos, A. Segade, P. Izquierdo, J.L. Lopez-Campos, P. Ianez, J. Vilan.

Ref: 6432

MODELLING THE DYNAMIC BEHAVIOUR OF A DRY FRICTION-TYPE MECHANICAL SHOCK INDICATOR. Vincent Rouillard, Matthew Lamb, Michael Sek.

Ref: 6450

FILLED CARBON NANOTUBES AS MULTIFUNCTIONAL NANOPLATFORMS FOR CANCER THERAPY AND BIOIMAGING. Gil Gonçalves, Stefania Sandoval, Gerard Tobias.

Ref: 6601

ESTIMATION OF FAILURE RESISTANCE OF PRESSURE VESSELS WITH INTERNAL CRACKS. Bogdan Szybinski, Pawel Romanowicz.

Ref: 6936

CAD/CAM EDUCATION IN DENTAL MEDICINE COURSES OF PORTUGAL AND SPAIN. Marina Marques, Filipe Araújo, Patrícia Fonseca, J.C. Reis Campos, André Correia.

Ref: 6421

WEAR OF α-ALUMINA IN HOT STEAM UP TO 300°C. Rolf Wäsche, Roman Ehrke, Mathias Woydt.

Ref: 6574

OPTIMIZATION OF THE AUXILIARY-BEAM SYSTEM IN RAILWAY BRIDGE VIBRATION MITIGATION USING FEM SIMULATION AND GENETIC ALGORITHMS. J.G. Baldonedo, A. Segade, J.A. López-Campos, E. Casarejos, J.R. Fernández, J.A. Vilan, J. Collazo-Rodríguez, M. López-Lago.

Ref: 6567

EXPERIMENTAL DETERMINATION OF ALUMINUM 7075-T6 HARDENING PARAMETERS TO PREDICT THERMAL RATCHETING. Mohammad Zehsaz, Armin Rahmatfam, Moharram Mohammadi.

Ref: 6859

CHARACTERIZATION OF MULTI-WALLED CARBON NANOTUBES REINFORCED ETHYLENE-OCTENE COPOLYMER COMPOSITES FOR DESIGN OF NOVEL HEAT SHRINKABLE MATERIALS. Remo M. Meri, Janis Zicans, Ingars Reinholds, Tatjana Ivanova, Zhenija Roja, Robert Maksimov.

Ref: 6615

CORROSION FATIGUE BEHAVIOR OF STEELS IN BIOFUELS. Sven Kaefer, Tobias Melz, Heinz Kaufmann, Christopher Tom Engler, Georg Anderson, Matthias Oechsner.

Ref: 6941

EVALUATION OF SURFACE ROUGHNESS OF DENTAL COMPOSITES SUBJECT TO DIFFERENT METHODS OF FINISHING AND POLISHING. Mariana Rios, Filipe Araújo, Tiago Marques, Filipe Oliveira, Mário A.P. Vaz, André Correia.

Ref: 6433

EFFECTS OF AMBIENT PRESSURE AND FLUID TEMPERATURE IN ULTRASONIC CAVITATION EROSION. S.H. Yeo, N.A. Prasanth, K.L. Tan.




- 6 -

Ref: 6600

VISCO-HYPERELASTIC MATERIALS CHARACTERIZATION BY RHEOLOGICAL MODELS FITTED WITH GENETIC ALGORITHMS. J.A. López-Campos, A. Segade, E. Casarejos, J.R. Fernandez, J.G. Baldonedo, J.A. Vilan, P. Yanez, P. Izquierdo.

Ref: 6598

STRAIN RATE DEPENDENT YIELD BEHAVIOUR UNDER COMPRESSION LOAD OF METALIC MATERIALS BASED ON EXPERIMENTAL DATA. Markus Grillenberger, Martin Schagerl.

Ref: 6876

GRAPHENE-BASED SCAFFOLDS: IN VITRO CELL CULTURE UNDER DINAMIC MICROENVIRONMENT. Paula A.A.P. Marques, André Girão, António Completo, Gil Gonçalves.

Ref: 6643

EXPERIMENTAL AND NUMERICAL FATIGUE ANALYSIS OF A PRECIPITATION HARDENED HIGH COPPER ALLOY WITH DIFFERENT NOTCH FACTORS. Matilde Scurria, Rainer Wagener, Heinz Kaufmann, Tobias Melz.

Ref: 6997

COMPARATIVE STUDY OF FIXED PROSTHODONTICS PREPARATION EVALUATION. Yiwei Huang, Paula Vaz, Margarida S. Sampaio Fernandes, Francisco Góis, J.C. Reis Campos, J.C. Sampaio Fernandes, César Leal.

Ref: 6517

ACOUSTIC EMISSION ANALYSIS OF FRICTION AND WEAR OF Ni AND Ag RUBBED IN LUBRICANT CONDITIONS. Vladislav Perfilyev, Igor Lapsker, Alexey Moshkovich, Lev Rapoport.

Ref: 6635

EXPERIMENTAL AND COHESIVE ZONE MODELLING ANALYSIS OF ADHESIVELY-BONDED STEPPED JOINTS. João O.S. Silva, Raul D.S.G. Campilho.

Ref: 6658

A NEW METHODOLOGY FOR DETECTION OF A LOOSE OR WORN BALL JOINTS USED IN VEHICLES SUSPENSION SYSTEM. Luis Carvalho, Sergio Santos, Carlos Ferreira.

Ref: 6934

MECHANICAL PERFORMANCE OF NOVEL MULTI-SCALE COMPOSITES DEVELOPED USING MICROCRYSTALLINE CELLULOSE. Sohel Rana, Subramani Pichandi, Shama Parveen, Raul Fangueiro.

Ref: 6672

METHODOLOGY TO CHARACTERIZE FRACTURE FORMING LIMITS IN SHEET METAL. Kishore Jawale, J.F. Duarte, Ana Reis, M. Beatriz Silva.

Ref: 6998

EARLY STUDY OF THE FACE AND IT´S POTENTIAL IMPORTANCE FOR DENTISTRY. Inês Côrte-Real, Rosete Nogueira, Ana C. Braga, J.C. Reis Campos, Mª. Helena Figueiral, Francisco Valente, Paula Vaz.

Ref: 6591

FAILURE CHARACTERIZATION OF THE METAL/METAL THERMAL SPRAYED BI-MATERIALS INTERFACE. Med Karim Harouche, Lamine Attali, Nadir Mesrati.

Ref: 6642

AEROELASTIC ANALYSIS OF COMBINED CONICAL-CYLINDRICAL SHELLS. Aouni A. Lakis, Youcef Kerboua, M. Toorani.

Ref: 6801

EXPERIMENTAL EVALUATION OF THE DAMPING PROPERTIES AND OPTIMAL MODELING OF COATINGS MADE BY PLASMA DEPOSITION TECHNIQUES. Stefano Amadori, G. Catania.

Ref: 6687

VIBRATION FATIGUE LIFE OF ALUMINUM STIFFENED PLATE SUBJECTED TO RANDOM LOADING. Haitao Hu, Jiang Xue, Sicai Zhang.

Ref: 6772

THE EFFECT OF MoDTC PARTICLES ON WEAR PROPERTIES OF DLC UNDER BOUNDARY LUBRICATION. Takayuki Tokoroyama, Yuji Yamashita, Takahiro Nishino.

Ref: 6820

EFFECT OF LABORATORY AGEING ON STRUCTURAL ADHESIVE JOINTS WITH METAL SUBSTRATES. Klára Machalická, Miroslav Vokáč, Martina Eliášová.

Ref: 6867

THE CURRENT AND THE WEAK MAGNETIC FIELD EFFECT ON THE NICKEL DEPOSITS. Rabeh Slimani, Nacer Zazi.

16:00-16:30 COFFEE-BREAK Coffee Lounge



Topic_A Chair: Xiong Zhang


Topic_B Chair: Miroslav Vokáč


Topic_D Chair: N. Constantin

4D (Room Galé I)

Topic_C Chair: Sven Kaefer

4E (Room Galé II)

Symp_19 Chair: Rui C. Barros

4F (Room Galé III)

Symp_7 Chair: N. Umehara

Ref: 6653

THE EFFECT OF TRANSPORTATION CONDITIONS ON THE LIQUID CARGO SLOSHING INSIDE ROAD TANKS. Maryna Kuzniatsova, Alexandr Shimanovsky.

Ref: 6841

INVESTIGATION OF HIGH STRENGTH STAINLESS STEEL USING SMALL SPECIMEN TEST TECHNIQUES - TENSILE AND FATIGUE PROPERTIES. Radek Prochazka, Jan Džugan, P. Konopik, Martin Rund.

Ref: 6423

ANALYSIS OF THERMO-ELASTIC PROPERTIES OF PARTICULATE NANO-COMPOSITES WITH VARIOUS TYPES OF INTERPHASES. Lidiia Nazarenko, Henryk Stolarski, Holm Altenbach.

Ref: 6770

CRACK TIP MECHANICS IN DISTORTION GRADIENT PLASTICITY. Sandra Fuentes-Alonso, Emilio Martínez-Pañeda.

Ref: 7003

SEISMIC RESPONSE CONTROL OF A CANTILEVERED HIGHWAY SIGN SUPPORT USING A TMD. Fábio M. Paiva, Rui C. Barros.


EFFECTS OF CERAMIC COUNTERPART MATERIALON FRICTION AND WEAR PROPERTIES OF a-C:H COATING AT HIGH TEMPERATURE. Noritsugu Umehara, Takuya Yamanouchi.

Ref: 6656

STABILIZED AND ANS LOBATTO SPECTRAL FINITE ELEMENTS. K.Y. Sze, Y.C. Hu.

Ref: 6842

CONDITION MONITORING AND COMPARISON OF BRAKING AND DYNAMICS IN RAILWAY FREIGHT WAGON. Marco Aimar, Aurelio Soma.

Ref: 6443

MECHANICAL BEHAVIOR OF ADDITIVE MANUFACTURED METALLIC MICRO-LATTICE STRUCTURE. Weidong Song, Lijun Xiao, Huiping Tang.

Ref: 6815

EFFECT OF CADMIUM COATING ON THE FATIGUE STRENGTH OF AISI 4140 STEEL USED IN OIL AND GAS COMPANY. Jefferson R.M. Santos, Herman J.C. Voorwald.

Ref: 7004

VIBRATION CHARACTERISTICS AND SEISMIC RESPONSE OF F.E.U.P. NEW CAMPUS LIBRARY BUILDING. Rui C. Barros, Silvia Couto, Manuel Braz-Cesar.

Ref: 6589

THE ROLE OF SURFACE TEXTURING IN REDUCING FRICTION OF NON-CONFORMAL CONTACTS UNDER MIXED LUBRICATION. Javier Echávarri, Eduardo Guerra, E. Chacon, Irene Bellon, Javier Hernández.




- 7 -

Ref: 6719

PREDICTION OF AIR ENTRAPMENT DEFECT DURING ZINC ALLOY HIGH PRESSURE DIE CASTING BASED ON GAS-LIQUID MULTIPHASE FLOW MODEL. Liu Cao, Dunming Liao, Fei Sun, Tao Chen, Zihao Teng, Yulong Tang.

Ref: 7002 (Invited Paper).

A THERMOMECHANICAL ANALYSIS OF HIGH ELASTO-PLASTIC PROPERTIES OF GUM METAL AT VARIOUS STRAIN RATES. Elzbieta A. Pieczyska, Karol Golasinski, Maria Staszczak, Michal Maj, Tadahiko Furuta, Shigeru Kuramoto.

Ref: 6446

RE-INFILTRATION REPAIRS OF COMPOSITES IN CIVIL AVIATION. Markus Linke, Sebastian Nesslinger, Juan Antonio García-Manrique.

Ref: 6843

FATIGUE CRACK GROWTH BEHAVIORS AT ELEVATED TEMPERATURE IN MOLYBDEUM AND TZM ALLOY. Yukio Miyashita, Hiroaki Ameno, Yoshihau Mutoh, Kosoku Nagata.

Ref: 7005

OPTIMIZATION OF TUBULAR STEEL LATTICE TELECOMMUNICATION TOWERS, SUBJECTED TO WIND LOAD INCLUDING VORTEX SHEDDING. Dário Vieira, Rui C. Barros.

Ref: 6590

RHEOLOGICAL CHARACTERIZATION OF LUBRICANTS USING A TRIBOMETER. Enrique Chacon, Javier Echávarri, Eduardo Guerra, N. Arribas Fernández.

Ref: 6755

NUMERICAL SIMULATION OF SLOSHING IN MULTI-BAFFLED CONTAINERS. Leopold Kruszka, Vasyl Gnitko, Yury Naumenko, Elena Strelnikova.

Ref: 6975

HIGH-SPEED DEFORMATION AND DESTRUCTION OF CONCRETE AND BRICK. Anatoly Bragov, Bhushan Karihaloo, Aleksandr Konstantinov, Leopold Kruszka, Dmitriy Lamzin, Andrey Lomunov, Yury Petrov.

Ref: 6514

COMPRESSIVE FAILURE BEHAVIOR OF UNIDIRECTIONAL GFRP COMPOSITE UNDER THE INFLUENCE OF IN-PLANE FIBER WAVINESS. N. Swaroop, C.Y. Yue, A Dasari.

Ref: 6882

NUMERICAL SIMULATION TO CHARACTERIZE FRACTURE LIMIT IN SHEET METAL FORMING. Soumitra Gain, Kishore Jawale, Abílio M.P. Jesus, Ana Reis, Maria Beatriz Silva.

Ref: 7007

ASSESMENT OF LONG TERM USE AND AGING IN THE ELECTROMAGNETIC AND MECHANICAL CHARACTERISTICS OF A MAGNETO-RHEOLOGICAL FLUID SPONGE DAMPER. Manuel Braz-Cesar, Rui C. Barros.

Ref: 6609

THE EFFECT OF FIBER MATERIAL ON FRICTIONAL BEHAVIOR OF LOOPED FIBER BRUSH. Motoyuki Murashima, Eishun Kohno, Noritsugu Umehara, Tomoki Kitamura, Taichi Nakao.

Ref: 6759

FORMATION OF FORCE AND HEAT NETWORKS IN BINARY PARTICLE SYSTEMS UNDER THERMALLY-ASSSISTED COMPACTION. Kucuk Gulsad, Alberto M. Cuitino.

Ref: 6711

BOND STRENGTH OF STEEL BARS IN CONCRETE UNDER HIGH TEMPERATURES. Jaesung Lee, Evan Sheesley, Yunping Xi, Kaspar Wilam.

Ref: 6718

EVALUATION OF THE DAMAGE TOLERANCE OF THIN SANDWICH MATERIALS. Nicolae Constantin, Marin Sandu, Adriana Sandu, Mircea Gavan, Dorin Rosu, Constantin Valentin Epuran, Bogdan Patrau.

Ref: 7008

GA-OPTIMIZED SEMI-ACTIVE FUZZY BASED CONTROLLER FOR SEISMIC VIBRATION REDUCTION OF A 3DOF STRUTURE WITH VELOCITY FEEDBACK. Manuel Braz-Cesar, Rui C. Barros.

Ref: 6610

WEAR REDUCTION WITH INNER STRUCTURE MADE BY 3D PRINTER. Motoyuki Murashima, Masato Kawaguchi, Masaya Tanaka, Noritsugu Umehara, Kouki Nemoto, Kiichi Okuno.

14:30-19:00 POSTERS SESSION (I)

Topics: B, F, H | Symposia: 1, 3, 4, 19 Lobby

Ref: 6428

KINEMATIC ANALYSIS OF MOZAMBICAN ATHLETES IN THE 100 METERS RACE. Ercilio Machanguana, Anicêncio Macitela, Alberto Graziano.

Ref: 6444

ISOTHERMAL OXIDATION BEHAVIOR OF Ti40 ALLOY AT SUPER-HIGH TEMPERATURE. Xiaonan Mao, Shewei Xin, Yongqing Zhao, Qian Li, Wei Zhou, Siyuan Zhang.

Ref: 6445

EFFECT OF LOADING TYPE AND MICROSTRUCTURE ON MECHANICAL PROPERTIES OF Ti-5Al-5Mo-5V-3Cr-1Zr ALLOY. Shewei Xin, Chaowen Huang, Yongqing Zhao, Xiaonan Mao, Wei Zhou, Qian Li.

Ref: 6489

CURE DEFORMATION ANALYSIS OF CURVED COMPOSITE HONEYCOMB SANDWICH STRUCTURE. Zhiyong Yang, Zhanwen Tang, Zhenyu Zhang, Hanqiao Shi, Xijun He, Boming Zhang.

Ref: 6522

CONTACTLESS ANALYSIS OF SURFACE OF POWDER INJECTION MOLDED PARTS. Berenika Hausnerova, Vladimir Pata.

Ref: 6524

THE INFLUENCE OF THE ADDITION OF NANOTUBES ON THERMO-PROTECTIVE ABLATIVE PROPERTIES OF EPOXY RESIN IN AVIATION APPLICATIONS. Pawel Przybylek, Robert Szczepaniak, Andrzej Komorek, Wojciech Kucharczyk.

Ref: 6538

INVESTIGATIONS OF THE SHRINK-FITTED JOINTS IN ASSEMBLED CRANKSHAFTS. Zbigniew Siemiątkowski, Mirosław Rucki, Sergiy Lavrynenko.

Ref: 6547

CHARACTERIZATION OFMECHANICAL PROPERTIES AND FRACTURE OF COMPOSITE SOUND-ABSORBING PANELS AFTER REPAIR. Dmitrii Lobanov.

Ref: 6603

LIGHT WEIGHT DESIGN and PERFORMANCE RESEARCH Of PMI FOAM. Kun Gao, Yajuan Xing, Zhenhe Wang, Hi Yang, Yao Feng, Yi Zhang, Bo Sun.




- 8 -

Ref: 6722

STUDY OF THE EFFECT OF INTERPHASE INTERACTION ON THE FRACTURE OF A REINFORCING CARBON FIBER BY A SINGLE FIBER COMPOSITE TEST. Izabella Rashkovan, Mark Kazakov.

Ref: 6723

HIGH PERFORMANCE CAST IRON MATRIX COMPOSITE - SOLIDIFICATION PATTERN CONTROL BY THERMAL ANALYSIS. Stelian C. Stan, Mihai Chisamera, Iulian Riposan.

Ref: 6760

FORCE BASED SYSTEM FOR ALIGNMENT OF AN UNIFORM LOADING OF A HYDROGENERATOR FOOT STEP BEARING. Jan Chvojan, Jaroslav Vaclavik.

Ref: 6840

DETERMINATION OF FLOW STRESS CURVES OF ZIRCONIUM ALLOY BY DYNAMIC MICRO-TENSILE TEST USING STRAIN GAUGE TECHNIQUE. Pavel Konopik, Martin Rund, Jan Džugan.

Ref: 6860

DEVELOPMENT AND CHARACTERIZATION OF ACRYLONITRILE-BUTADIENE-STYRENE BASED COMPOSITES WITH CARBON NANOTUBES FOR SMART 3D PRINTING APPLICATIONS. Janis Zicans, Remo M. Meri, Ingars Reinholds, Guna Vugule, Ruta Saldabola, Tatjana Ivanova, Zhenija Roja, Egils Plume.

Ref: 6904

DETERMINATION OF PHYSICAL AND MECHANICAL PROPERTIES OF FEED PELLETS FOR TILAPIA (OREOCHROMIS NILOTICUS). Djeziri Mourad, Didouche Yasmina-fadhéla.

Ref: 6952

EFFECT OF TEMPERATURE ON VALVE SEALS WHEN OPERATING ON ALTERNATIVE FUELS. Ales Dittrich, Stanislav Beroun.

Ref: 6964

MEASUREMENTS OF MASS MOMENTS OF INERTIA OF MULTI-BODY SYSTEMS. Pavel Brabec.

Ref: 6966

THE POSSIBILITY OF IDENTIFYING THE BENEFITS OF COATING PISTON RINGS. Robert Vozenilek, Stanislav Beroun, Josef Brousek, Filip Seidel.

Ref: 7009

PARAMETERS OPTIMIZATION TO MINIMIZE THE VIBRATIONS EFFECTS DURING THE MILLING PROCESS. João B. Ribeiro, Manuel Braz-Cesar, Ana Isabel Pereira.

19:30-22:30 WELCOME DINNER Restaurant




- 9 -

TUESDAY, 13 JUNE 2017

O8:00-12:30 POSTERS SESSION (II)

Topics: C, F, I, J | Symposia: 12, 14, 15, 18

Lobby

Ref: 6418

NUMERICAL SIMULATION OF BUBBLE PULSATION GENERATED BY DEEP WATER EXPLOSION. Chun-liang Xin, Yu Shan, Jian Tu, Tong Li, Zhi-Ping Ye, Xin-Quan Wang.

Ref: 6427

PREDICTION OF THE FATIGUE BEHAVIOUR OF CLADDING MATERIALS USED IN THE MANUFACTURE OF REACTOR PRESSURE VESSELS. Alvaro Rodriguez-Prieto, Ana Maria Camacho, Miguel Angel Sebastian.

Ref: 6458

EFFECT OF HYDROGEN ON LOW CYCLE FATIGUE CHATACTERISTICS OF 316L STAINLESS STEEL. Un-Bong Baek, Seung-Hoon Nahm, Hae-Moo Lee, Seung-Wook Baek.

Ref: 6459

INTEGRATED MANAGEMENT SYSTEMS: THE A. PETTI SPA EXPERIENCE. Daniela Sica, Ornella Malandrino, Stefania Supino.

Ref: 6488

IDENTIFICATION OF POSSIBLE CAUSES OF FATIGUE FAILURE IN RADIUS ROD PINS FOR TROLLEYBUS REAR AXLES USING PARAMETRIC CALCULATIONS OF FATIGUE LIFE. Miloslav Kepka, Miloslav Kepka Jr..

Ref: 6499

LOW-CYCLE FATIGUE LIFE OF AW 1050 ALUMINIUM ALLOY FSW AND TIG WELDED JOINTS. Sigitas Kilikevicius, Ramunas Cesnavicius, Povilas Krasauskas.

Ref: 6534

EXPERIMENTAL AND PRELIMINARY NUMERICAL DYNAMIC ANALYSIS OF EFFECT OF SAMPLE GEOMETRY ON IMPACT STRENGTH OF ADHESIVE JOINTS. Andrzej Komorek, Jan Godzimirski, Agata Pietras.

Ref: 6541

NUMERCAL SIMULATION OF DYNAMIC CHANNEL-ANGULAR PRESSING OF COPPER SPECIMENS IN 3D STATEMENT. Sergey A. Zelepugin, Aleksandr S. Bodrov, Yuri F. Khristenko, Rashit A. Yusupov.

Ref: 6549

PROBABILISTIC ASSESSMENT OF THE PROPELLER BLADE PRIMARY FAILURE. Milan Ruzicka, Martin Matyska.

Ref: 6580

VARIATIONAL AND DIVERGENTIONAL SPH AND MLSM COMPARISON FOR HIGH SPEED IMPACT. Alexander V. Gerasimov, Roman O. Cherepanov.

Ref: 6584

MODELLING OF THE PROCESS PENETRATION OF STEEL BARRIERS BY ELONGATED IMPACTORS. Maxim Yu. Orlov, Victor P. Glazyrin, Yuriy N. Orlov, Vlad. V. Golubatnikov.

Ref: 6602

DEFORMATION AND DAMAGE OF Fe-Cr STEELS IN A WIDE TEMPERATURE RANGE. Vladimir A. Skripnyak, Natalia V. Skripnyak, Vladimir V. Skripnyak, Evgeniya G. Skripnyak.

Ref: 6606

EFFICIENT METHOD FOR THE CALCULATION OF WAVE PROPAGATION IN RODS SUBJECT TO IMPACT LOADING. Alexandr Shimanovsky, Volha Yakubovich, Iryna Varazhun.

Ref: 6616

EXPERIMENTAL INVESTIGATION ON THE PROPERTIES AND PERFORMANCE OF SELF-COMPACTING CONCRETE WITH VEGETABLE AND SYNTHETIC FIBERS. A. Belkadi, S. Aggoun, C. Amouri, A. Geuttala, H. Houari.

Ref: 6691

BLOW-UP MODES IN FRACTURE OF ROCK SAMPLES AND EARTH’S CRUST ELEMENTS. Pavel Makarov, Igor Smolin, Aleksey Kulkov, Mikhail Eremin.

Ref: 6692

PROBABILISTIC MODELLING POROUS STRUCTURE AND NUMERICAL SIMULATION OF MECHANICAL BEHAVIOUR OF POROUS CERAMICS. Igor Smolin, Pavel Makarov, Mikhail Eremin, Kirill S. Matyko.

Ref: 6749

THE INFLUENCE OF WEATHER IN HEAT PUMP SYSTEMS. Clito F. Afonso.

Ref: 6787

PARAMETRIC STUDY ON FAILURE PROBABILITY OF REACTOR PRESSURE VESSEL SUBJECTED TO LTOP TRANSIENT. Han-Bum Surh, Shin-Beom Choi, Gyu-Mahn Lee, Jong-Wook Kim.

Ref: 6816

ADHESIVE JOINT INTEGRITY MONITORING USING FIBER OPTICS SENSORS. Chow-Shing Shin, Yi-Jui Yang, Shien-Kuei Liaw.

Ref: 6877

ADVANCES IN NON DESTRUCTIVE TESTING AND EVALUATION (NDT&E): DEVELOPMENTS AND APPLICATIONS. Telmo G. Santos, Patrick L. Inacio, Miguel Machado, J.J. Pamies Teixeira, Carla M. Machado, Rosa Miranda, Carla C.C.R. Carvalho.

Ref: 6926

CASTING DEFECTS AND THE MECHANICAL DESIGN PHILOSOPHIES. Teresa Morgado, Ricardo Dias, Carla C. Machado, J.J. Pamies Teixeira.




- 10 -

O8:45-09:30 KEYNOTE LECTURE (II) Salgados I+II

Professor Alexander Slocum (MIT, USA)

MECHANICS AND MATERIALS IN THE DESIGN OF SYMBIOTIC OFFSHORE ENERGY HARVESTING SYSTEMS

Chair: Prof. Sergei Mileiko (ISSP of RAS, Russia)

O9:30-11:00 OPEN FORUM ON ENGINEERING EDUCATION Salgados I+II

Professor Shaker A. Meguid (Chair) (U. Toronto, Canada)

BEST PRACTICES IN ENGINEERING EDUCATION: CAN DIGITAL IMMIGRANTS TEACH DIGITAL NATIVES?

Professor David Nowell (U. Oxford, UK)

CHALLENGES IN ENGINEERING EDUCATION IN THE UK

Professor Marnie V. Jamieson (U. Alberta, Canada)

APPLICATIONS OF PEER TEACHING AND DEEP LEARNING IN ENGINEERING EDUCATION COURSE DESIGN

Professor Noritsugu Umehara (U. Nagoya, Japan)

ADJUSTING THE LEVEL OF ENGINEERING EDUCATION IN JAPAN THROUGH INTERNATIONAL CONNECTIONS




Topic_A Chair: Leopold Kruszka


Topic_J Chair: David Eager


Topic_D Chair: Markus Linke

5D (Room Galé I)


5E (Room Galé II)

Topic_I Chair: Alexandre Macêdo

5F (Room Galé III)

Symp_14 Chair: Gilberto Santos

Ref: 6769

ABAQUS2MATLAB: A NOVEL TOOL FOR FINITE ELEMENT POST-PROCESSING. Emilio Martínez-Pañeda, George Papazafeiropoulos, Miguel Muñíz-Calvente.

Ref: 6442

ASSESSMENT OF A SUBSTITUTE BIRD MODEL FOR THE PREDICTION OF BIRD-STRIKE OF HELICOPTERS STRUCTURES. David Delsart, Florent Boyer, Alice Vagnot.

Ref: 6515

EXPERIMENTAL STUDY ON DELAMINATION ONSET OF UNIDIRECTIONAL GFRP DCB SPECIMENS UNDER IN-PLANE FIBER WAVINESS DEFECT. N. Swaroop, C.Y. Yue, A Dasari, N. Srikanth.

Ref: 6429

MODELLING TECHNIQUES FOR DELAMINATION AND FRACTURE OF COMPOSITES. Jose L. Curiel-Sosa, Behrooz Tafazzolimoghaddam, Joaquin Navarro-Zafra, Mahesa Akbar, N. Azam Abdullah, Meor I.M. Ahmad.

Ref: 6416

LIMIT EQUILIBRIUM ANALYSIS OF NAILING AND END ANCHOR PERFORMANCES IN THE SLOPE STABILITY. Rouhallah Yal Beyranvand, Iman Raeesi Zadeh.

Ref: 6479

SIX SIGMA AND QUALITY GATES: IDENTIFYING THE CRITICAL PATH AND ENSURING CONSISTENT QUALITY OF EXECUTION. Julian Ariza Alvarez, Stefan Kull, Roland Jochem.

Ref: 6771

STABILITY THEORY METHODS AND MODELLING PROBLEMS IN MECHANICS. Lyudmila K. Kuzmina.

Ref: 6483

FORCE V DISPLACEMENT TO MEASURE IMPACT ATTENUATION PERFORMANCE IN PLAYGROUND SURFACING MATERIAL. David Eager, Chris Chapman.

Ref: 6518

AN ANALYTICAL SOLUTION FOR TRANSIENT THREE DIMENSIONAL THERMOELASTICITY. Mohsen Jabbari, Hasan Haghighat, Esmaeil Shahryari, M.R. Eslami.

Ref: 6651

GAUSSIAN HYPERMODEL APPLIED TO FAILURE ANALISIS OF LAMINATED COMPOSITES. L.A.S. Abreu, Helcio R.B. Orlande, Marcelo J. Colaço.

Ref: 6422

SHEARING IN WELDED T-JOINTS. Alexandre de Macêdo Wahrhaftig, Bruno Felix dos Santos Coelho.

Ref: 6506

COMPANIES’ COMMITMENT ON CORPORATE SOCIAL RESPONSIBILITY: PERCEIVED BENEFITS AND BARRIERS OF SA 8000. Gilberto Santos, F. Murmura, Laura Bravi.




- 11 -

Ref: 6779

ACCOUNTING THE DYNAMIC PROPERTIES OF MATERIAL AT TECHNOLOGICAL PROCESSES OF HIGH-RATE DEFORMATION. Iurii Vorobiov, Nataliia Ovcharova, Leopold Kruszka.

Ref: 6545

SCALING EFFECTS IN THE HIGH VELOCITY IMPACT RESPONSE OF FLAT AND CYLINDRICAL SPECIMENS. T.D. Karimbaev, A.A. Chernyshov, A.Y. Ezhov.

Ref: 6523

INTERLAMINAR TOUGHENING OF RESIN TRANSFER MOLDED LAMINATES BY ELECTROSPUN POLYCAPROLACTONE STRUCTURES: EFFECT OF THE INTERLEAVE MORPHOLOGY. Timo Meireman, Sam van der Heijden, Lode Daelemans, Ives De Baere, Hubert Rahier, Wim Van Paepegem, Karen De Clerck.

Ref: 6685

RELIABILITY ENGINEERING: RISK MANAGEMENT IN SEAPORTS OPERATIONS. Carlos F. Barros, Fransival Costa, Luiz Chaves, João David, Vitor Azevedo.

Ref: 6455

GREEN CEMENT FROM SUGARCANE LEAVES COMBUSTION ASH. Estela Assureira, Marco Assureira.

Ref: 6507

SUPPLY CHAIN QUALITY MANAGEMENT: A MODEL OF VENDOR RATING. Federica Murmura, Gilberto Santos, Laura Bravi.

Ref: 6786

MODELLING OF CABLES AND FIBRES IN MULTIBODY DYNAMICS. Pavel Polach, Jan Dupal, Zbyněk Šika, Michal Hajžman.

Ref: 6555

A STUDY OF CUSHIONING CHARACTERISTICS OF AIRBAG WITH CONSTANT VENTING AREA. Jin-Peng Wen, Jiang Xue, Si-Cai Zhang, Bin Li.

Ref: 6528

EQUIVALENT PLATE MODEL OF CURVILINEAR STIFFENED PANELS. Francesco Danzi, Enrico Cestino, Giacomo Frulla, James M. Gibert.

Ref: 6754

LATEST DEVELOPMENTS IN NONDESTRUCTIVE TESTING OF RESIDUAL STRESSES IN WELDED STRUCTURES BY ULTRASONIC METHOD. J. J. Kleiman, Y.A. Kudryavtsev.

Ref: 6457

IDENTIFICATION OF HYSTERICALLY DEGRADING STRUCTURES USING BWBN MODEL. Ying Zhao, Mohammad Noori.

Ref: 6519

STRUCTURED EYETRACKING-BASED REQUIREMENTS VALIDATION WITH THE HELP OF VIRTUAL PROTOTYPES. Robert Refflinghaus, Christian Esser.

Ref: 6793

A NURBS-BASED TOPOLOGY OPTIMIZATION METHOD INCLUDING ADDITIVE MANUFACTURING CONSTRAINTS. Giulio Costa, Marco Montemurro, Jérôme Pailhès.

Ref: 6680

SOCIAL ORGANISATIONAL LIFE CYCLE ASSESSMENT: AN APPROACH FOR THE QUALITY MANAGEMENT. Manuela D’Eusanio, Alessandra Zamagni, Luigia Petti.




Topic_A Chair: Pavel Polach


Topic_J Chair: Pawel Platek


Topic_D Chair: Enrico Cestino

6D (Room Galé I)

Symp_15 Chair: A. Gerasimov

6E (Room Galé II)

Topic_I Chair: M. Yamakawa

6F (Room Galé III)

Symp_8 Chair: C.C. António

Ref: 6819

STOCHASTIC FATIGUE CALCULATIONS USING AN ACCELERATED 3-STEP MULTILINEAR KINEMATIC HARDENING MODEL OF SPHEROIDAL GRAPHITE IRON. Martin Dazer, Peter Höller, Tobias Leopold, Bernd Bertsche.

Ref: 6662

DYNAMIC ANALYSIS OF INTERACTION BETWEEN VEHICLE WHEEL WITH A METAL PROTUBERANCE AND RAIL. Marijonas Bogdevicius, Rasa Zygiene.

Ref: 6617

NON-REVERSIBLE TUNEABLE ELECTRICAL CONDUCTIVITY OF PANI-BASED CFRP IN THROUGH THICKNESS DIRECTION BY CONTROLLING DE-DOPING EFFECT OF POLYANILINE. Vipin Kumar, Tomohiro Yokozeki, Teruya Goto, Tatsuhiro Takahashi.

Ref: 6491

NUMERICAL SIMULATION OF HIGH-VELOCITY PROJECTILE INTERACTIONS WITH GROUPS OF SPACED RODS AND PLATES. Alexander Gerasimov, Sergey Pashkov, Vladimir Barashkov.

Ref: 6477

NON DESTRUCTIVE EVALUATION OF STRESS STATE OF THE HIGHWAY BRIDGE VIA BARKHAUSEN NOISE TECHNIQUE. Katarina Zgutova, Miroslav Neslusan, Kamil Kolarik, Juraj Sramek.

Ref: 6475

OPTIMIZATION OF A HARD TURNING PROCESS USING WIPER GEOMETRY TOOL BY NORMAL BOUNDARY INTERSECTION. Gabriela Belinato, Pedro Paulo Balestrassi, Anderson Paulo Paiva, João Roberto Ferreira, Pedro Carvalho Rosa.

Ref: 6866

DEVELOPMENT OF SPECIALIZED GRID GENERATION PROGRAM FOR EFFICIENT AERODYNAMIC ANALYSIS OF 3-D WINGS USING OPENFOAM FLOW ANALYSIS CODES. Byoungsoo Kim, Wanghyun Kim, Jongyun Lee.

Ref: 6664

FINITE ELEMENT ANALYSIS OF HIGH SPEED IMPACT ON ALUMINIUM PLATE. Andrea Bareggi.

Ref: 6624

LONG-TERM PERFORMANCE OF CONTINUOUS FIBER-REINFORCED THERMOPLASTIC COMPOSITES. Ozan Erartsin, Leon E. Govaert.

Ref: 6536

COMPUTATIONAL MODELLING OF MIL COMPOSITES FRACTURE UNDER DYNAMIC LOADING. Sergey A. Zelepugin, Alexey S. Zelepugin, Vladimir F. Tolkachev.

Ref: 6521

OPTIMUM DESIGN OF DISPLACEMENT-RESTRAINT PC STEEL BAR BRACE FOR MOMENT-RESISTING STEEL FRAMES. Takeshi Asakawa, Makoto Yamakawa, Koji Uetani.

Ref: 6478

VARIABILITY ASSESSMENT OF ADHESIVELY BONDED THERMOPLASTIC HONEYCOMB SANDWICH STRUCTURES. Stijn Debruyne, Dirk Vandepitte, Korneel Van Massenhove.




- 12 -

Ref: 6893

A REVIEW OF SPECTRAL AND CONVENTIONAL METHODS FOR CYCLE COUNTING AND FATIGUE LIFE ESTIMATION; EXTENSION TO FINITE ELEMENT ANALYSIS. Alfredo Moura, Paulo J. Antunes, Júlio C. Viana, Virginia Infante, Luis Sousa.

Ref: 6666

MODELLING ASSESSMENT OF CERAMIC/COMPOSITE ARMOUR UNDER BALLISTIC IMPACT. Djalel Eddine Tria, Ballout Ali, Harouche Karim.

Ref: 6627

MULTIDIMENSIONAL APPROACH TO EVALUATE THE FATIGUE STRENGTH OF GLASS FIBER REINFORCED POLYAMIDE. Thomas Schalk, Andreas Linnemann.

Ref: 6597

INFLUENCE OF GRAIN SIZE DISTRIBUTION ON THE MECHANICAL BEHAVIOR OF MATERIALS IN A WIDE RANGE OF STRAIN RATES. Natalia V. Skripnyak, Evgeniya G. Skripnyak, Vladimir V. Skripnyak, Vladimir A. Skripnyak.

Ref: 6562

AN ALGORITHM FOR DAMAGE DETECTION AND LOCALIZATION USING OUTPUT-ONLY RESPONSE FOR CIVIL-ENGINEERING STRUCTURES SUBJECTED TO SEISMIC EXCITATIONS. Farouk Frigui, Jean-Pierre Faye, Carmen Martin, Olivier Dalverny, François Peres, Sébastien Judenherc.


A RELIABILITY-BASED ROBUST DESIGN OPTIMIZATION APPROACH FOR COMPOSITE STRUCTURES. Carlos C. António.

Ref: 6914

EFFICIENT SIMULATION OF STICK-SLIP DYNAMICS IN MATLAB. D.C. Lin, D.C.D. Oguamanam.

Ref: 6752

ANALYTICAL MODEL OF THE PROGRESSIVE COLLAPSE OF FOAM-FILLED FRUSTUM CONSIDERING FOAM/SHELL FRICTION. Fan Yang, Minglu Wang, Shaker A. Meguid.

Ref: 6649

PERVAPORATION DEHYDRATION BY PVA-FULLERENOL-CHITOSAN MIXED MATRIX MEMBRANES. Mariia Dmitrenko, Anastasia Penkova.

Ref: 6690

FRACTAL CHARACTERISTICS OF ROCK MASS ELEMENTS FRACTURING DURING MINING. Mikhail Eremin, Pavel Makarov.

Ref: 6783

APPLICATION OF BIOLOGY CONCEPTS TO METALLIC STRUCTURES OPTIMIZATION OF CIVIL ENGINEERING. A. Benanane, A. Ouazir, S. Benanane, S.M. Bourdim, M. Titoum.

Ref: 6737

A RBDO APPROACH FOR THE RELIABILITY ASSESSMENT OF COMPOSITE STRUCTURES. Carlos C. António, Luisa N. Hoffbauer.

Ref: 6955

MODELING OF DYNAMIC BEHAVIOUR OF A 3D PIEZOELECTRIC SOLID WITH CAVITY USING BEM. Leonid Igumnov, Ivan Markov, Igor Vorobtsov.




Symp_18 Chair: T. Morgado


Topic_J Chair: Fan Yang


Topic_D Chair: Radka Pernicová

7D (Room Galé I)

Symp_12 Chair: Clito Afonso

7E (Room Galé II)

Topic_I Chair: Hipólito Sousa

7F (Room Galé III)

Symp_8 Chair: Luisa C. Sousa

Ref: 6654

MAPPING OF NON-DESTRUCTIVE TECHNIQUES FOR INSPECTION OF WIRE AND ARC ADDITIVE MANUFACTURING. Ana Lopez, Ricardo Bacelar, Inês Pires, Telmo Santos, Luisa Quintino.

Ref: 6773

MEASUREMENT OF THE DISPERSION INFLUENCE TO THE PHASE VELOCITY OF THE LAMB WAVE A0 AND S0 MODES. Lina Draudviliene, Hacene Ait-Aider.

Ref: 6686

MAGNETORHEOLOGICAL MATERIALS IN A HELICOPTER SEAT CUSHION. Nicole Cruz, Afzal Suleman.

Ref: 6425

QUANTITATIVE MODEL FOR PREDICTING THE SUITABILITY OF CANDIDATE MATERIALS FOR REACTOR PRESSURE-VESSELS MANUFACTURING. Alvaro Rodriguez-Prieto, Ana M. Camacho, M.A. Sebastian.

Ref: 6850

PERFORMANCE BASED SEISMIC DESIGN OF REINFORCED CONCRETE STRUCTURES IN MADINAH. Abdul Qadir Bhatti, M. Farooq Addas, Abdul Wahab.

Ref: 6921

STRIKER SHAPE OPTIMIZATION AS THE PROBLEM OF GAME THEORY. Nikolay Banichuk, Svetlana Ivanova, Evgeniy Makeev.

Ref: 6797

COMPOSITE DRILLING INDUCED DAMAGE CHARACTERIZATION. Joana Baracinha, Carla M. Machado, Teresa L. Morgado.

Ref: 6776

IMPACT VELOCITY-DEPENDENCE OF THE FRAGMENTATION OF SHOCK-RESISTANT PMMA. Norazrina Mat Jali, Patrice Longère.


NEW OXIDE-FIBRE/MOLYBDENUM-MATRIX COMPOSITES. Sergei T. Mileiko.

Ref: 6748

FLOODED EVAPORATORS VERSUS DRY EVAPORATORS: IN WHICH CONDITIONS? Clito F. Afonso.

Ref: 6949

COMPARATIVE ANALYSIS OF THE PERMEABILITY EVALUATED IN THE SIMPLE CONCRETE AND CONCRETE WITH ADDI-TION OF MICROSILICA. Andres Villavicencio, Ana Torre, Javier Arrieta.

Ref: 6923

AN AVERAGE-BASED DESIGN OPTIMIZATION ALGORITHM. João B. Cardoso, Artur Barreiros.

Ref: 6848

IMPACT OF THE DESIGN AUTOMATION OF PROGRESSIVE TOOLS FOR AUTOMOTIVE COMPONENTS. Ricardo Manso, J.J. Pamies Teixeira, Nuno Roma, Teresa Morgado.

Ref: 6788

DEVELOPMENT OF A SAFE MODULAR BODY STRUCTURE FOR A BATTERY ELECTRIC DRIVEN URBAN VEHICLE. Ralf Sturm, Michael Schäffer, Marco Münster.

Ref: 6731

CHEMICAL COMPOSITION AND METALLURGICAL PURITY OF IN 713 C SUPERALLOY EFFECT ON TECHNOLOGICAL PARAMETERS FOR PRODUCTION OF AIRCRAFT ENGINE CRITICAL COMPONENTS. Rafal Cygan, P. Rokicki.

Ref: 6807

INFLUENCE OF ENCLOSURE MASONRY WALLS ON ENERGY BUILDINGS CONSUMPTION. Hipólito Sousa, Rui Sousa.

Ref: 7043

MODELING AND SEISMIC ASSESSMENT OF MASONRY HISTORICAL STRUCTURES. Panagiotis G. Asteris, M.D. Douvika, A.D. Skentou, M. Apostolopouloou, A. Moropoulou.

Ref: 6945

A RBRDO APPROACH BASED ON FEASIBILITY ROBUSTNESS AND IMPOSED RELIABILITY LEVEL. Gonçalo N. Carneiro, Carlos C. António.




- 13 -

Ref: 7020

EFFECTS OF COLD-WORKING ALUMINUM PRIOR TO ACTIVATION VIA A GA-IN EUTECTIC. Jonathan Slocum, Douglas Hart.

Ref: 6817

NUMERICAL DYNAMIC AXIAL CRUSHING OF BI-TUBULAR METALLIC CYLINDRICAL TUBES WITH STIFFENERS. Muhammad Kamran, Naveed Ahmed, Xue Pu, Azhar Munir.

Ref: 6753

DEVELOPMENT OF A DEVICE TO CONTROL THE DEPOSITION OF ELECTROSPUN NANOFIBRES. Nuno J.R. Belino, C.I.S. Pinheiro, R. Paul.

Ref: 6863

PASSIVE HEATING SYSTEM DESIGN FOR RESIDENTIAL HOUSES IN PETROPOLIS´ METROPOLITAN AREA. Ana Clara L. Pereira, Ana L.T. Motta.

Ref: 7044

PREDICTION OF MECHA- NICAL CHARACTERIS-TICS OF SOILCRETE MATERIALS USING ARTIFICIAL NEURAL NETWORKS. P.G. Asteris, A. Alexandridis, K. Kolovos, E.G. Anesti, M.G. Douvika, C.A. Karamani, M. Kassolis, A.D. Skentou.

Ref: 6977

A PRELIMINARY ANALYSIS OF SOME PARAMETERS’ IMPORTANCE IN BUILDING ENERGY EFFICIENCY ASSESSMENT. Carlos C. António, Hugo Santos, Rosa Oliveira, Eduardo O. Fernandes.

Ref: 6991

THE PORTUGUESE HOUSING STOCK: AN INITIAL ANALYSIS OF THE NATIONAL ENERGY CERTIFICATION DATABASE. Rosa Oliveira, C.C. António, Hugo Santos, Eduardo O. Fernandes.

Ref: 6993

IDENTIFICATION, CLASSIFICATION AND MODELING UNCERTAINTY IN EARLY STAGE DESIGN OF MANUFACTURING SYSTEMS - A SURVEY. António A. Campos, Elsa Henriques.

14:30-19:00 POSTERS SESSION (III)

Topics: A, D, J | Forum | Symposia: 8 Lobby

Ref: 6454

PREDICTION OF FAILURE ENVELOPES OF COMPOSITE LAMINATES BASED ON FINITE-VOLUME MICROMECHANICS. Zhanwen Tang, Wenqiong Tu, M-J Pindera.

Ref: 6460

NEW TECHNOLOGY FOR INVESTMENT CASTING CERAMIC MOULD MANUFACTURE WITH A CERAMIC FIBERS MATERIALS NEW GENERATION. Rafal Cygan.

Ref: 6484

PEDAGOGY OF THE CONCEPT OF LOAD AT A DISTANCE IN F.E.A. CODES (BASIC CASE STUDIES). Nader G. Zamani.

Ref: 6510

Mg-Cu-Y BULK METALLIC GLASS SYNTHESIZED VIA SPRAY FORMING. R.H. Kong, M.L. Ted Guo, K.F. Chang, Chi Y.A. Tsao.

Ref: 6532

SIMULATION AND EXPERIMENTAL VALIDATION OF SINGLE POINT INCREMENTAL SHEET FORMING PROCESS FOR A PYRAMIDAL FORM. Karim Belouettar, Mohand Ould Ouali, Naseredine Zeroudi.

Ref: 6619

MIXED MATRIX MEMBRANE BASED ON PVA MODIFIED WITH FULLERENOL FOR PERVAPORATION SEPARATION OF ACETIC ACID-WATER MIXTURE. Anna Kuzminova, Maria Dmitrenko, Anastasia Penkova, Denis Roizard.

Ref: 6626

EXPERIMENTAL-THEORETICAL RESEARCH OF THE EFFECT OF MANUFACTURING DEFECTS ON THE STRENGTH OF COMPOSITE STRUCTURES WITH IN-SITU X-RAY MONITORING. Aleksandr N. Anoshkin, Valerii Yu. Zuiko, Pavel V. Pisarev, Vladimir M. Osokin, Konstantin A. Pelenev.

Ref: 6636

HYBRID ADHESIVELY-BONDED SCARF JOINTS: EXPERIMENTATION AND COHESIVE ZONE SIMULATIONS. David L. Alves, Raul D.S.G. Campilho, Raul D.F. Moreira.

Ref: 6712

SHEET METAL FORMING BY NUMERICAL SIMULATIONS: 2D AND 3D AXISYMMETRIC DEFORMATION OF A CYLINDRICAL PIECE. Kevin A. Mouta, Lucas D. Azevedo, Maria G. Fernandes, Elza M.M. Fonseca.

Ref: 6729

DESIGN OF A NEW ALLOY FOR INTERNAL COMBUSTION ENGINES PISTONS. Antoni Jankowski, Miroslaw Kowalski.

Ref: 6767

RECYCLING AND MECHANICAL TESTING OF POLYURETHANE RESIDUES EXPANDED IN HIGH DENSITY POLYETHYLENE INJECTION PROCESS. André L. Teixeira, Jane M.F. Paiva.

Ref: 6832

TOWARDS BENCHMARK CASES FOR COMPUTATIONAL FLUID DYNAMICS FOR CASTING FIBER CONCRETE. Oksana Goidyk, Andres Braunbrück, Rasmus R. Marjapuu, Tanel Tuisk, Heiko Herrmann.

Ref: 6833

INFLUENCE OF THE FIBER ORIENTATIONS ON THE FRACTURE OF FIBER CONCRETE. Heiko Herrmann, Andres Braunbrück, Rasmus R. Marjapuu, Tanel Tuisk.

Ref: 6852

ORGANIZATION OF STUDENT CONTESTS IN MECHANICAL ENGINEERING SUBJECTS AS A FACTOR OF HUMAN POTENTIAL DEVELOPMENT. Alexandr Shimanovsky, Maryna Kuzniatsova.

Ref: 6924

CAPACITY PLANNING AND OPERATION OPTIMIZATION OF HYBRID ELECTRICAL ENERGY SYSTEMS - THE ROLE OF UNCERTAINTY. Jone Heitor, Artur Barreiros, João B. Cardoso.

Ref: 6956

BOUNDARY ELEMENT MODELING OF A THIRD SLOW WAVE IN PARTIALLY SATURATED POROELASTIC MEDIA. Andrey Petrov, Svetlana Litvinchuk, Aleksandr Belov, Igor Vorobtsov.

Ref: 6957

BEM COMPARATIVE ANALYSIS OF DYNAMIC RESPONSE OF POROVISCOELASTIC MEDIA USING VISCOELASTIC MODEL. L. Igumnov, A. Ipatov, V. Novikov.

19:30-23:30 CONFERENCE BANQUET Estoi Palace




- 14 -

WEDNESDAY, 14 JUNE 2017

O8:00-12:30 POSTERS SESSION (IV)

Topics: E, G, L | Symposia: 5, 10, 13, 17

Lobby

Ref: 6474

RESPONSE SURFACE METHODOLOGY APPLIED TO A HARD TURNING PROCESS USING WIPER GEOMETRY TOOL. Gabriela Belinato, Rachel Campos Sabioni, Taynara Incerti Paula, Paulo Henrique Campos, Pedro Paulo Balestrassi.

Ref: 6502

FLUTELESS THREADED HOLES FORMING USING A COMBINED TOOL. Povilas Krasauskas, Ramunas Cesnavicius, Sigitas Kilikevicius.

Ref: 6734

BACKGROUND KNOWLEDGE ON LIFE CYCLE COST AND FACILITY MANAGEMENT. Filipa Salvado, Nuno Almeida, Alvaro Vale Azevedo.

Ref: 6744

DESIGN AND CONSTRUCTION OF A MACHINE FOR FATIGUE TESTS BY ROTATION AND FLEXION. Claudinei J. Oliveira, Gilmar C. Silva, Priscila H. Diez, Gabriel M. Santos, Leonardo A. Sousa.

Ref: 6750

MULLITE CERAMIC FABRICATION BY 3D PRINTING. Ruey-Tsung Lee, Wei-Seng Cheng, Ching-Sheng Lee, Fang-Fei Lin, Fwu-Hsing Liu.

Ref: 6757

DYNAMIC FAILURE TIME OF A TRUNCATED CONICAL SHELL UNDER LOCAL IMPULSE. Marina Chernobryvko, Konstantin Avramov, Yuriy Mesha, Anatoly Tonkonogenko, Leopold Kruszka.

Ref: 6803

EXPERIMENTAL ANALYSIS OF ELASTIC-PLASTIC FREE VIBRATIONS OF PLATE MODELS CAUSED BY IMPACT. Michal Grązka, Jacek Janiszewski, Grzegorz Jemielita, Zofia Kozyra, Leopold Kruszka, Ryszard Rekucki.

Ref: 6826

ANALYSIS AND ASSESSMENT OF FLAMMABLE SELECTED WOOD-BASED PANELS RECEIVED FROM RENEWABLE RAW MATERIALS AT ACCELERATED PRODUCTION SYSTEM. Waldemar Jaskolowski, Piotr Boruszewski, Aneta Lukaszek-Chmielewska.

Ref: 6834

STANDARDIZED DATA COLLECTION MODEL FOR BUILDING LIFE-CYCLE COSTING. Mariana Almeida, Filipa Salvado, Nuno Almeida, Paula Couto.

Ref: 6870

ARCHITECTURE OF SHAPES AND POLYMERS TILE REINTERPRETATION. Ana Rodrigues, Mauro Costa Couceiro.

Ref: 6878

STUDY, DESIGN AND DEVELOPMENT OF A MODBUS MASTER THAT EVALUATES THE MODBUS COMMUNICATION BETWEEN EQUIPMENTS. José D.S. Simões, Eurico A.R. Seabra, André M. Fernandes.

Ref: 6928

PROPOSAL FOR PUBLIC BUILDINGS REAL ESTATE EVALUATION. Paula Couto, Filipa Salvado, Maria João F. Silva.

Ref: 6930

ASSET MANAGEMENT EVOLUTION AND MAIN DEVELOPMENTS. Filipa Salvado, Maria João F. Silva, Paula Couto, Alvaro Vale Azevedo.

Ref: 6933

COST-BENEFIT ANALYSIS APPLIED TO HOSPITALS AND HEALTH INFRASTRUCTURES INVESTMENT PROJECTS. Maria João F. Silva, Filipa Salvado.

Ref: 6940

FIRST ATTEMPT TOWARDS THE DEVELOPMENT OF TRANSTIBIAL PROSTHESIS. Joana Alves, Cesar Ferreira, Cristina Santos, Eurico A.R. Seabra, Helder Carvalho.

Ref: 6954

COMPARISON BETWEEN PORTUGUESE REGULATION AND THE STRUCTURAL EUROCODES APPLIED TO “PILOTIS” BUILDINGS. Fernando Sambo, Maria João F. Silva.

Ref: 6963

POSSIBILITY OF USING RECYCLED RAW MATERIALS (CORUNDUM AND SILICON CARBIDE) IN CEMENTIOUS MIXTURES. Radka Pernicová.

Ref: 6965

ANALYSIS OF AIR QUALITY AND HEALTH CONCERNS. António R. Fernandes, Luisa N. Hoffbauer, Catarina F. Castro.

Ref: 6969

GEARBOX DESIGN FOR A DUAL MOTOR DRIVE SYSTEM. Josef Brousek, Robert Vozenilek.

Ref: 6970

ASTHMA IN CHILDREN AND INDOOR AIR POLLUTANTS - ASSOCIATIONS IN RESIDENTIAL AND SCHOOL ENVIRONMENTS. Guilherme Ferreira, Rosa Oliveira, Hugo Santos, Catarina F. Castro.




- 15 -

O8:45-09:30 KEYNOTE LECTURE (III) Salgados I+II

Professor Masahiko Yoshino (Tokyo Inst. of Techn., Japan)

NANO PLASTIC FORMING FOR DEVELOPMENT OF FUNCTIONAL SURFACES

Chair: Prof. Noritsugu Umehara (U. Nagoya, Japan)



Symp_17 Chair: Luis F. Silva


Topic_J Chair: Ralf Sturm


Topic_D Chair: Abbas Tcharkhtchi

8D (Room Galé I)

Topic_E Chair: Nimal Rajapakse

8E (Room Galé II)

Symp_5 Chair: Mª João Silva

8F (Room Galé III)

Symp_13 Chair:Paulo Piloto

Ref: 6539

A DESIGN OF PIEZOELECTRIC DAMPER FOR VIBRATION ATTENUATION OF FLEXIBLE STRUCTURES. Yu Su, Wei Zhou, Wei-Zhong Zhang.

Ref: 6844

IMPULSIVE PRESSURE RESPONSE OF SANDWICH PLATES WITH AUXETIC CORE. Altug Ataalp, Halit S. Turkmen, Zafer Kazanci.

Ref: 6849

INFLUENCE OF FILLER PARTICLE DISTRIBUTION ON THE MAGNETORHEOLOGICAL EFFECT IN MAGNETOACTIVE ELASTOMERS. Michal Królewicz, Jerzy Kaleta.

Ref: 6463

STATIC AND THERMAL DYNAMIC MECHANICAL ANALYSIS OF AlOOH NANOPARTICLE REINFORCED FIBER COMPOSITES. Dilmurat Abliz, Gerhard Ziegmann.

Ref: 6733

PROPOSED MODEL FOR ECONOMIC DATA COLLECTION OF THE BUILDING USE STAGE. Pedro Pereira, Filipa Salvado, Nuno Almeida, Paula Couto.

Ref: 6529

FIRE PERFORMANCE OF NON-LOADBEARING LIGHT STEEL FRAMING WALLS - NUMERICAL SIMULATION. Paulo G. Piloto, Mohamed S. Khetata, Ana B.R. Gavilan.

Ref: 6543

DYNAMICS MODELING AND SIMULATION OF A DOUBLE-AXIS SWING TABLE. Qian Liu, Min Yang.

Ref: 6872

AXIAL LOW VELOCITY IMPACT RESPONSE OF ANISOTROPIC ANTI-TETRACHIRAL FILLING LATTICES. Kadir Gunaydın, Zana Eren, Halit S. Turkmen, Zafer Kazanci, Fabrizio Scarpa.

Ref: 6906

LIGHTWEIGHT EXPANDED CLAY AS A SPACE HOLDER IN ALUMINUM MATRIX COMPOSITES: EFFECT OF PARTICLE SIZE IN DENSITY AND COMPRESSION BEHAVIOR. Helder Puga, Vitor H. Carneiro, Carlos Jesus.

Ref: 6525

PREPARATION OF NANOSTRUCTURED MATERIALS BY ELECTRICAL SINTERING. Edwin Gevorkyan, Sergiy Lavrynenko, Miroslaw Rucki, Zbigniew Siemiątkowski, Maksim Kislitsa.

Ref: 6735

IMPROVING THE ECONOMIC PERFORMANCE OF THE BUILDINGS LIFE CYCLE. Filipa Salvado, Nuno Almeida, Alvaro Vale Azevedo.

Ref: 6530

DISTRIBUTION OF STRESSES IN A DOUBLE-LAP BONDED ASSEMBLY SUBJECTED TO IMPACT AND FIRE. Roula Nahas, Georgio Rizk, Khaled Khalil, Georges Challita, Vincent Legrand, Pascal Casari, Frédéric Jacquemin.

Ref: 6552

AN APPROXIMATE METHOD FOR OBTAINING THE DYNAMIC FLEXIBILITY OF TRANSVERSELY VIBRATING BEAMS - SUBSYSTEM OF FREIGHT WAGONS. Andrzej Buchacz.

Ref: 6871

MECHANICAL RESPONSE OF ADDITIVE MANUFACTURED REGULAR CELLULAR STRUCTURES IN QUASI-STATIC LOADING CONDITIONS - PART I EXPERIMENTAL INVESTIGATIONS. Piotr Dziewit, Pawel Platek, Jacek Janiszewski, Marcin Sarzyński, Michal Grazka, Robert Paszkowski.

Ref: 6948

ADVANCED AUXETIC FIBROUS STRUCTURES AND COMPOSITES FOR INDUSTRIAL APPLICATIONS. Sohel Rana, Rui Magalhães, Raul Fangueiro.

Ref: 6677

SAFE-BY-DESIGN IMPLEMENTATION APPROACH IN PRODUCTION SYSTEMS - CASE STUDY, PROTECTIVE COMPOSITE COATINGS BASED IN NANO-PARTICLES. Rita Alberto, Marina Peixoto, Maria Farinha, Ana Cabral, Marco Estrela, Eduardo Silva, Ricardo Rato.

Ref: 6835

LIFE CYCLE COST ANALYSIS OF SCHOOL BUILDINGS: CONSTRUCTION AND REHABILITATION COSTS. Mariana Almeida, Filipa Salvado, Nuno Almeida, Paula Couto.


EVALUATION OF THE BEARING CAPACITY OF FIBER REINFORCED CONCRETE SECTIONS UNDER FIRE EXPOSURE. Fabio Di Carlo, Alberto Meda, Zila Rinaldi.

Ref: 6561

DESIGN AND DEVELOPMENT OF MECHATRONIC SYSTEMS AT UMINHO: A REVIEW OF SOME CASE STUDIES. Luis F. Silva, Eurico Seabra, Mário Lima, Helder Carvalho, António A. Vicente.

Ref: 6884

MECHANICAL RESPONSE OF ADDITIVE MANUFACTURED REGULAR CELLULAR STRUCTURES IN QUASISTATIC LOADING CONDITIONS. PART II - NUMERICAL INVESTIGATIONS. Pawel Platek, Jacek Janiszewski, Jerzy Malachowski, Piotr Dziewit, Michal Grazka, Robert Paszkowski, Marcin Sarzynski.

Ref: 6962

INFLUENCE OF TIME ON REOLOGICAL PROPERTIES OF HYDROPHOBIZED PLASTER WITH METAKAOLIN ADDITION IN DEPENDENCE OF EXTERNAL TEMPERATURE. Radka Pernicová.

Ref: 6858

A INTEROPERABILITY BETWEEN BIM OBJECTS AND THE PRONIC APPLICATION IN THE SPECIALTY OF BUILDING FACILITIES THE PORTUGUESE REALITY . Joana Lopes, Maria João F. Silva, Paula Couto, Fernando F.S. Pinho.

Ref: 6625

CATENARY ACTION IN SINGLE STOREY INDUSTRIAL HALLS SUBJECTED TO LOCALIZED FIRES. Naveed Iqbal, Jovan Fodor, Joakim Sandstroem, Tim Heistermann, Milan Veljkovic.




- 16 -

Ref: 6581

OIL-HYDRAULIC POWER UNITS - STATE OF THE ART. Eurico Seabra, Helder Puga, Jorge Costa.

Ref: 6927

INTEROPERABILITY CHALLENGES IN BIM MODELS. Paula Couto, Maria João F. Silva, Filipa Salvado, Alvaro Vale Azevedo.




Symp_17 Chair: Eurico Seabra


Symp_10 Chair: W. Moćko


Topic_L Chair: Soliman Mahmoud

9D (Room Galé I)

Topic_E Chair: Masahiko Yoshino

9E (Room Galé II)

Symp_5 Chair: Álvaro Azevedo

9F (Room Galé III)

Symp_13 Chair: Alberto Meda

Ref: 6646

STUDY OF THREAD TENSION SETTINGS FOR SHIRT MANUFACTURE USING AN INSTRUMENTED LOCKSTITCH SEWING MACHINE. Patricia Mellero, Helder Carvalho, Sandra Biégas, Fernando N. Ferreira.

Ref: 6441

INFLUENCE OF TRIAXIALITY ON THE FRACTURE BEHAVIOR OF Ti6Al4V TITANIUM ALLOY AT IMPACT LOADING CONDITIONS. Wojciech Mocko, Cezary Kostrzewski, Adam Brodecki.

Ref: 6495

THE APPLICATION OF MACHINE VISION SYSTEM TO MONITOR THE PROCESS OF PACKING IN A MANUFACTURING COMPANY. Remigiusz Labudzki, Rafal Talar, Filip Sarbinowski.


THE ATOMISTIC STUDIES OF MECHANICAL BEHAVIOR OF GRAPHENE SHEET USING TERSOFF POTENTIAL. Daniela A. Damasceno, Euclides Mesquita, R.K.N.D. Rajapakse, Renato Pavanello.

Ref: 6929

BIM AND COBIE INTEGRARION FOR STRUCTURES LIFE-CYCLE ANALYSIS. Maria João F. Silva, Filipa Salvado, Paula Couto, Alvaro Vale Azevedo.

Ref: 6639

INVESTIGATION AND ANALYSIS OF BEHAVIOUR PARAMETERS OF LOADED STRUCTURAL MASONRY PANELS EXPOSED TO HIGH TEMPERATURES IN SMALL SCALE TESTS. Julia Menegon, Angela Gaio Graeff, Luis C.P. Silva Filho.

Ref: 6703

CAR DIAGNOSTICS USING SOUND. J.C. Aparicio Fernandes, M. João Sepulveda.

Ref: 6511

RESEARCH OF ICE BEHAVIOR AT BLASTING EMULSION EXPLOSIVE. Maxim Yu. Orlov, Gennady N. Bogomolov, Yulia N. Orlov.

Ref: 6553

PHILOSOPHY OF TECHNOLOGY AND ITS APPLICATION ON MECHANICS AND MATERIALS IN DESIGN. Gilberto Santos, Enrique Soto, Maria João Félix, Enrique Mandado.

Ref: 6782

FINITE ELEMENT APPROACH TO SIMULATE CNT-REINFORCED CALCIUM-SILICATE-HYDRATE (C-S-H) COMPOSITE. Carlos F. Guzmán, Erick I.S. Flores, Juan Carlos Pina, Sergio Yáñez.

Ref: 6931

APPLICATION OF COST-BENEFIT ANALYSIS TO STRUCTURAL REINFORCEMENT OF ANCIENT BUILDINGS. Maria João F. Silva, Filipa Salvado, Manuel Baião.

Ref: 6789

INFLUENCE OF FIRE RETARDANT ON SELECTED THERMAL INSULATION MATERIALS ON NATURAL BASIS-WOODEN FIBREBOARD. Linda M. Osvaldová.

Ref: 6791

ADVANCES IN THE FIELD OF SHAPE MEMORY POLYMERS. Abbas Tcharkhtchi, Joseph Fitoussi, Sedigheh Farzaneh.

Ref: 6775

COMPARATIVE FAILURE OF AERONAUTICAL ALLOYS AA2024 AND AA7075 AT LOW AND HIGH STRAIN RATE. Manar Gunasilan, Patrice Longère.

Ref: 6596

DEVELOPMENT OF A METHODOLOGICAL APPROACH FOR REQUIREMENTS MANAGEMENT IN CROSS-COMPANY NETWORKS (ReMaiN). Ovidiu Bielefeld, Nadine Schlueter, Petra Winzer.

Ref: 6839

THE STUDY OF ELECTROMECHANICAL BUCKLING AND PULL-IN INSTABILITIES OF ELECTROSTATICALLY ACTUATED MICROBEAMS. Jin Zhang.

Ref: 6932

CONTRIBUTION TO DEFINITION OF SEISMIC REHABILITATION NATIONAL RECCOMENDATIONS FOR BUILDINGS. Maria João F. Silva, Manuel Baião.

Ref: 6891

SERVOMOTOR CONTROL THROUGH A RESISTIVE TOUCHPAD. Joaquim Gabriel, José Neto, Fernão D. Magalhães.

Ref: 6798

EXPERIMENTAL ANALYSIS OF DYNAMIC BEHAVIOUR OF STEELS BY COMBINED METHOD OF HOPKINSON BAR TECHNIQUE. Roman Gieleta, Leopold Kruszka, Kamil Szwarc.

Ref: 6781

DETERMINATION OF THE CONSERVATISM DEGREE IN THE LEVEL-1 OF THE STANDARD API-579-1/ASME-FFS-1-2007 FOR THE ASSESSMENT OF DENTS IN INTERNAL PRESSURE PIPE-LINE. David Casarrubias, Jorge González, Diego Rivas, Manuel Beltrán.

Ref: 6942

THE ROLE OF LNEC IN THE PROMOTION OF QUALITY IN CONSTRUCTION PROJECTS. Alvaro Vale Azevedo, António Cabaço, Maria João F. Silva.

Ref: 6919

STUDY AND DESIGN OF A DEVICE THAT APPLIES ADHESEVE TAPE. André Fernandes, Eurico A.R. Seabra, José Simões, Luis F. Silva.

Ref: 6974

EXPERIMENTAL AND CALCULATED STUDY OF DYNAMIC CHARACTERISTICS OF WATER-SATURATED SAND. Anatoly Bragov, Vladimir Balandin, Vasily Kotov.

Ref: 6988

ALARP: CONCEPTS AND TECHNIQUES TO BUILD A SAFETY CASE. Soliman Mahmoud.

Ref: 6984

METHODOLOGY PROPOSAL FOR THE INTEGRATION OF LIFE CYCLE COSTS IN PRONIC. Catarina F. Simões, Maria João F. Silva, Paula Couto.




- 17 -

13:00-13:30 CONFERENCE CLOSURE Salgados I+II


THURSDAY, 15 JUNE 2017

FREE-DAY

Contacts among Delegates, Technical Visits to Universities/Laboratories/ Institutes,

Cultural Events, Museums, and Excursions.




VIDAMAR HOTEL

M2D2017 conference Rooms

Second Floor:

Third Floor:




NOTES




M2D2017 PROGRAM Albufeira, 11-15 June 2017

Time SUN MONDAY (12 June)

TUESDAY (13 June)

WEDNESDAY (14 June)

THU

REGISTRATION REGISTRATION

& Posters Session (II)

REGISTRATION &

Posters Session (IV)

TE

CH

NIC

AL

VIS

ITS

AN

D E

XC

UR

SIO

NS

08:00

OPENING SESSION

KEYNOTE LECTURE (II) KEYNOTE LECTURE (III) 09:00

KEYNOTE LECTURE (I)

OPEN FORUM ON

ENGINEERING EDUCATION

Ses

sio

n 8A

S

YM

P_1

7

Ses

sio

n 8B

T

OP

IC_J

Ses

sio

n 8C

T

OP

IC_D

Ses

sio

n 8D

T

OP

IC_E

Ses

sio

n 8E

S

YM

P_5

Ses

sio

n 8

F

SY

MP

_13

10:00 COFFEE-BREAK

Ses

sio

n 1A

S

YM

P_9

Ses

sio

n 1B

S

YM

P_1

Ses

sio

n 1C

S

YM

P_3

Ses

sio

n 1D

T

OP

IC_C

Ses

sio

n 1E

T

OP

IC_H

Ses

sio

n 1

F

TO

PIC

_G

11:00 COFFEE-BREAK COFFEE-BREAK

Ses

sio

n 5A

T

OP

IC_A

Ses

sio

n 5B

T

OP

IC_J

Ses

sio

n 5C

T

OP

IC_D

Ses

sio

n 5D

S

YM

P_2

Ses

sio

n 5E

T

OP

IC_I

Ses

sio

n 5

F

SY

MP

_14

Ses

sio

n 9A

S

YM

P_1

7

Ses

sio

n 9B

S

YM

P_1

0

Ses

sio

n 9C

T

OP

IC_L

Ses

sio

n 9D

T

OP

IC_E

Ses

sio

n 9E

S

YM

P_5

Ses

sio

n 9

F

SY

MP

_13

Ses

sio

n 2A

T

OP

IC_A

Ses

sio

n 2B

S

YM

P_6

Ses

sio

n 2C

S

YM

P_3

Ses

sio

n 2D

T

OP

IC_C

Ses

sio

n 2E

S

YM

P_1

1

Ses

sio

n 2

F

TO

PIC

_G

12:00

13:00

LUNCH LUNCH

CLOSING SESSION

LUNCH

14:00

Ses

sio

n 3A

T

OP

ICA

Ses

sio

n 3B

T

OP

IC_B

Ses

sio

n 3C

S

YM

P_4

Ses

sio

n 3D

T

OP

IC_C

Ses

sio

n 3E

S

YM

P_1

6

Ses

sio

n 3

F

TO

PIC

_F

Ses

sio

n 6A

T

OP

IC_A

Ses

sio

n 6B

T

OP

IC_J

Ses

sio

n 6C

T

OP

IC_D

Ses

sio

n 6D

S

YM

P_1

5

Ses

sio

n 6E

T

OP

IC_I

Ses

sio

n 6

F

SY

MP

_8

15:00

EA

RLY

.BIR

D R

EG

IST

RA

TIO

N

16:00 COFFEE-BREAK COFFEE-BREAK

Ses

sio

n 4A

T

OP

IC_A

Ses

sio

n 4B

T

OP

IC_B

Ses

sio

n 4C

T

OP

IC_D

Ses

sio

n 4D

T

OP

IC_C

Ses

sio

n 4E

S

YM

P_1

9

Ses

sio

n 4

F

SY

MP

_7

Ses

sio

n 7A

S

YM

P_1

8

Ses

sio

n 7B

T

OP

IC_J

Ses

sio

n 7C

T

OP

IC_D

Ses

sio

n 7D

S

YM

P_1

2

Ses

sio

n 7E

T

OP

IC_I

Ses

sio

n 7

F

SY

MP

_8

17:00

18:00

Poster Session (I) Poster Session (III)

19:00 WELCOME DINNER CONFERENCE BANQUET

CONFERENCE SPONSORS

Documents

M2D2017 Program - UPM2D2017 Albufeira/Portugal 7th International Conference on MECHANICS AND MATERIALS IN DESIGN Albufeira/Portugal, 11-15 June 2017 - 1 - PROGRAM