Embed Size (px)
Citation preview
MA H SLURRY PUMPS
Norky Wei
WhatsApp & Phone: +86 188 3028 9136Wechat: 0086 183 3017 3287
Email:[email protected]
2
VERSATILE HEAVY DUTY SOLUTION
DDDD epon MAH series pumps
are heavy duty horizontal slurry pumps
designed to handle the transfer of
abraisive and high density slurries in
mining and heavy industry.
MAH pumps feature a rugged cast iron
construction with replaceable wear
liners available in 27% chrome white
iron, rubber or urethane to suit a wide
range of applications, slurry types and
consistencies.
Pumps are available in sizes ranging
from 1 inch (25mm) to 18 inch (450mm)
discharge and feature high efficiency
performance capable of flow rates from
10.8 to 6500 m3/hour (48-28600USGPM)
and heads up to 125 metres (410ft) for
high head models.
All D epon MAH slurry pumps
are designed to be interchangeable
with the most common slurry pump
footprints used by the mining industry.
MAH pumps are manufactured using
the highest quality materials to ensure
reliability and extended service life in
heavy duty applications.
MAHHORIZONTAL SLURRY PUMPSHeavy duty, horizontal slurry pumps. High efficiency transfer of abraisive and high density slurries with extended
DEPON MAH 2x1.5B HORIZONTAL SLURRY PUMP
DEPON 4x3EHH
MAH pumps are manufactured with
a rugged cast iron outer casing which
features reinforcing ribs for excellent
high pressure strength and safety.
WEAR LINERS
A range of replaceable wear liners
are available in 27% chrome white
iron, rubber or urethane to suit the
requirements of specific applications
and slurry types. Wear liners are easily
replaced when required by simply
removing the front cover plate bolts and
sliding off the front cover. This allows
minimal downtime and simple servicing
for maintenance staff.
IMPELLERS
The impeller features pumpout
vanes on the rear face to prevent
recirculation. Impellers are available
in 27% chrome white iron or rubber to
suit the requirements of the pumped
product and are easily accessible by
simply removing the front cover plate
bolts and sliding off the front cover.
EXTERNAL IMPELLER ADJUSTMENT
An external impeller adjustment bolt
is located under the bearing assembly
and is easily accessible. This allows
for changes to be made to the impeller
clearance to maximise efficiency and
service life without removing the front
cover plate or disconnecting pipework
or the bearing assembly. The system
allows quick and simple adjustments to
be made to compensate for wear and
changes in operating conditions and
duty points.
MAH HORIZONTAL SLURRY PUMPS
MAH HORIZONTAL SLURRY PUMP 3
MAH Horizontal Slurry Pumps are 100% fully interchangeable with the most common slurry pump design in the mining industry.
MAH pumps are fitted with heavy
duty bearing assemblies with angular
contact bearings in the wet end and
single or double row deep groove roller
bearings in the drive end. Bearings
are grease lubricated as standard
and are available with the option
of oil lubrication to meet customer
requirements. Bearing assemblies
are fitted to the bearing frame with
four through bolts allowing for quick
removal and simple servicing.
SHAFT SEALING OPTIONS
Pumps are fitted with packed gland
type shaft seals as standard with
PTFE packing and pumped product
lubrication. Optional external clean
water lubrication is available as an
option to suit applications where
product lubrication is not viable.
MECHANICAL SEAL
A range of mechanical seals are
available to replace the packed gland
shaft seal. Adaptor plates can be easily
fitted to match the requirements of
specific types of mechanical seals and
seals are available in a wide range of
materials.
EXPELLER
MAH pumps are fitted with an expeller
as standard which reduces seal face
pressure and reduces recirculation to
extend seal life and reduce impeller
wear.
100% INTERCHANGEABLE
All MAH spare parts are fully
interchangeable with the most common
slurry pump design in the mining
industry. High quality Milestone
spare parts can be fitted into existing
pumps to improve performance and
extend service life.
MAH HORIZONTAL SLURRY PUMPS4
PUMP PERFORMANCERUBBER LINED PUMPS
METAL LINED PUMPS
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0� � � � � �� �� �� �� �� �� ��� ��� ��� ��� ��� ��� ��� ���� ���� ����
To
tal
He
ad
(m
)
Volumetric Flow Rate (L/sec)
1.5x1
2x1.5
3x2
4x3
6x4
8x6
10x812x10
14x12
16x14
20x18
��� � � �� � � � � � � � � � �
220
200
180
160
140
120
100
80
60
40
20
0
To
tal
He
ad
(ft
)
3 4 5 6 8 10 20 30 40 50 70 100 150 200 300 400 500 700 1000 1500 2000
80
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
To
tal
He
ad
(m
)
Volumetric Flow Rate (L/sec)
1.5x1
2x1.5
3x2
4x3
6x4
8x6
10x8
20x18
12x10 14x12
16x14
USGPM 50 100 150 200 300 500 1000 2000 3000 5000 10000 20000 30000
260
240
220
200
180
160
140
120
100
80
60
40
20
0
To
tal
He
ad
(ft
)
Performance curves are for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS 5
HIGH HEAD PUMPS
DEPON 6x4FHH HIGH HEAD SLURRY PUMP.
3 4 5 6 8 10 20 30 40 50 70 100 150 200 300 400 500
130
120
110
100
90
80
70
60
50
40
30
20
10
0
To
tal
He
ad
(m
)
Volumetric Flow Rate (L/sec)
1.5x13x2
4x3
6x4
8x6
USGPM 50 100 150 200 300 500 1000 2000 3000 5000 7000
420
400
380
360
340
320
300
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
To
tal
He
ad
(ft
)
6
MAH 1.5x1METAL LINER AND IMPELLERPUMP SPECIFICATIONS
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)Wear Liner Material
32/25 B 15 14 B1127 52�� ���o��
Whit� e�on159/152
2�� ���o�� �����
Iron
0 2 4 6 8 10
80
70
60
50
40
30
20
10
0
2400
r/min
3800
3600
2500
2600
2700
2800
2920
3000
3100
3200
3400
1400
1600
1800
2000
2100
22002300
1200
20%30%
35%40%
35%
30%
NP
SH
2.5
m
3.5
m
4.5
m
5.5
m
Flow Rate (litres/sec)
Total Head (m)
40%
0 20 40 60 80 100 120 140 160
Flow Rate (USGPM)
260
240
220
200
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
MAH HORIZONTAL SLURRY PUMPS 7
MAH 1.5x1RUBBER LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
3����
B 15
20 B1052 5
R !!"# $%&"'
High Tensile S(eel
159/152 Rubber
PUMP SPECIFICATIONS
10%
60
50
40
30
20
10
0
0 2 4 6 8 10
r/min
3400
3200
3000
2800
2600
2400
2200
2000
1800
1600
1400
20%
30%
30%
35%
Flow Rate (litres/sec)
Total Head (m)
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 20 40 60 80 100 120 140 160
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS8
MHH 1.5x1HIGH HEAD SLURRY PUMP
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
)*+*,
C 30
16 M-.//*0 5*01 -45ome
White Iron343/330
27% Chrome White Iron
PUMP SPECIFICATIONS
r/min
2200
2150
10%
0 1 2 3 4 5 6 7 8 9 10
100
95
90
85
80
75
70
65
60
55
50
45
40
35
30
Flow Rate (litres/sec)
Total Head (m)
1800
1850
2100
1900
1950
2050
2000
1600
1550
1450
1500
1750
1700
1650
1400
15%20%
25%
30%
320
300
280
260
240
220
200
180
160
140
120
100
Total Head (feet)
0 20 40 60 80 100 120 140 160
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
9
MAH 2x1.5METAL LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
6789:
B 15
19 B15127 5:;< =>?@AB
W>CDB E?@F184
:;< =>?@AB
W>CDB E?@F
PUMP SPECIFICATIONS
2500
2400
2600
2700
2800
r/min
3200
3000
1400
1600
1800
2000
2100
2200
2300
1200
1900
NP
SH
3m
4m
6m
8m
0 5 10 15 20 25
80
70
60
50
40
30
20
10
0
20%30% 35%
40%
40%
45%
45%
Flow Rate (litres/sec)
Total Head (m)
240
220
200
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 50 100 150 200 250 300 350 400
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
10
MAH 2x1.5RUBBER LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
GHIJK
B 15
16 B15127 5Rubber Lined High Tensile
Steel180 Rubber
PUMP SPECIFICATIONS
20%
NPSH 2.5m
50
40
30
20
10
0
2m
0 2 4 6 8 10 12 14 16 20
r/min
2600
2400
2200
2000
1800
1600
1400
1200
1000
30%
40%
45%
50%
50%
5m4m
3.5m
3m
Flow Rate (litres/sec)
Total Head (m)
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 50 100 150 200 250
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
11
MAH 3x2METAL LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
LNONP
C 30
25 C2147 5QLT UVXome
White Iron214
27% Chrome White Iron
PUMP SPECIFICATIONS
0 5 10 15 20 25 30 35 40 45
80
70
60
50
40
30
20
10
0
r/min3100
2900
2700
2500
2300
2100
1900
1700
1500
20%
30%
40%42%
44%
42%
Flow Rate (litres/sec)
Total Head (m)
240
220
200
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 100 200 300 400 500 600 700
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
12
MAH 3x2RUBBER LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
YZ[Z\
C 30
21 C2127 5
Rubber Lined High Tensile
]^eel215 Rubber
PUMP SPECIFICATIONS
NP
SH 3m
45
40
35
30
25
20
15
10
5
2m
0 5 10 15 20 25
r/min2100
2000
1900
1800
1700
1600
1500
1400
1300
4m
35%40% 45%
50%
53%
55%
Flow Rate (litres/sec)
Total Head (m)
140
120
100
80
60
40
20
0
Total Head (feet)
0 100 200 300 400 500 600 700
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
13
MHH 3x2HIGH HEAD SLURRY PUMP
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
_`a`b
D 60
31 MDH2147 5c_d fghijk
lgmnk phiqr_sar`_
c_d fghijk
lgmnk phiqt uvcbw 60
PUMP SPECIFICATIONS
r/min
1450
1350
NP
SH
4.5
m
0 5 10 15 20 25 30 35 40 45
100
75
50
25
0
3m
Flow Rate (litres/sec)
Total Head (m)
950
1150
1250
1050
850
6m
7.5
m
10% 20% 30%40%
45%
47%
320
300
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 100 200 300 400 500 600 700
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
14
MAH 4x3METAL LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
xyyz{|
C 60
18 D3147 5}{~ ������
Whit� ��on245
}{~ ������
Whit� ��onD 30
PUMP SPECIFICATIONS
r/min
2200
2000
30%
NP
SH
5m
6m
1900
1800
1700
1600
1460
1400
1300
1200
1100
1000
40% 50%60%
65%
70%
71%
70%
4m
3m
2m
0 10 20 30 40 50 60
60
50
40
30
20
10
0
Flow Rate (litres/sec)
Total Head (m)
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 100 200 300 400 500 600 700 800 900
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
15
MAH 4x3RUBBER LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
������
C 30
28 D3147 5
������ �����
High Tensile ��eel
245 Rubber
PUMP SPECIFICATIONS
NP
SH
3m
40
35
30
25
20
15
10
5
0
2m
0 10 20 30 40 50 60
r/min
1800
1700
1600
1470
1400
1300
1200
1100
4m
5m
20%
1000
960
800
30%40%
50%
55%
55%
59%
Flow Rate (litres/sec)
Total Head (m)
120
100
80
60
40
20
0
Total Head (feet)
0 100 200 300 400 500 600 700 800 900
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
16
MHH 4x3HIGH HEAD SLURRY PUMP
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
������
E 120
38 ������� 527% Chrome
White Iron518/508
27% Chrome White Iron
X (406) 300
PUMP SPECIFICATIONS
r/min
1565
1400
30%
NPSH 3m
0 20 40 60 80 100
150
125
100
75
50
25
0
2m
Flow Rate (litres/sec)
Total Head (m)
900
40% 50%55%
60%
1000
1100
1200
1300
600
700
800
4m
6m 8m
480
460
440
420
400
380
360
340
320
300
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 200 400 600 800 1000 1200 1400 1600
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
17
MAH 6x4METAL LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
¡¢£ ¢¢
D 60
44 E4147 527% Chrome
White Iron397/365
27% Chrome White Iron
E 120
X (406) 300
PUMP SPECIFICATIONS
r/min
1600
1500
30%
NPSH 6m
3m
0 20 40 60 80 100 120 140 160 180
80
70
60
50
40
30
20
10
0
1480
1400
1350
1300
1250
1200
1150
1100
1050
1000
900
800
40%50%
60%
65%
68%
65%
4m
5m
8m
Flow Rate (litres/sec)
Total Head (m)
240
220
200
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 400 800 1200 1600 2000 2400 2800
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
18
MAH 6x4RUBBER LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
¤¥¦§¤¦¦
D 60
33 E4147 5
Rubber Lined High Tensile
¨©eel397/365 RubberE 120
PUMP SPECIFICATIONS
800
40%
NP
SH
3m
50
40
30
20
10
0
2m
0 20 40 60 80 100 120
r/min
1350
1300
1250
1200
1150
1100
1050
1000
970
900
50%60%
65%
70%
71.5%
70%
65%
2.5m 4.5
m
6m
Flow Rate (litres/sec)
Total Head (m)
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 200 400 600 800 1000 1200 1400 1600 1800
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
19
MHH 6x4HIGH HEAD SLURRY PUMP
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
ª«¬ª¬¬
F 260
57 ®¯°±ª±² 5³²´ µ¶·¸¹º
»¶¼½º ¾·¸¿²À¬²¬Á
³²´ µ¶·¸¹º
»¶¼½º ¾·¸¿
PUMP SPECIFICATIONS
r/min
100030%
NPSH 3m
0 50 100 150 200 250
100
75
50
25
0
2m
Flow Rate (litres/sec)
Total Head (m)
900
600
800
700
40% 50%
60%
60%
64%
4m
8m
6m
340
320
300
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 500 1000 1500 2000 2500 3000 3500 4000
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
20
MAH 8x6METAL LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
ÂÃÃÄÅÆÃ
E 120
63 F6147 527% Chrome
White Iron510
27% Chrome White Iron
R 300
X (406) 300
PUMP SPECIFICATIONS
r/min
1140
1100
30%
NP
SH
5m
0 50 100 150 200 250
80
70
60
50
40
30
20
10
0
3m
600
700
800
900
1000
400
500
4m
6m
7m
8m
40%45%
50%
51%
50%
47%
Flow Rate (litres/sec)
Total Head (m)
240
220
200
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 500 1000 1500 2000 2500 3000 3500
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
21
MAH 8x6RUBBER LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
ÇÈÈÉÊËÈ
E 120
59 F6147 5
ÌÍÎÎÏÐ ÑÒÓÏÔ
High Tensile ÕÖeel
510 RubberR 300
PUMP SPECIFICATIONS
r/min
1000
980
30%
NPSH 6
m
50
40
30
20
10
0
2m
0 50 100 150 200 250
940
900
850
800
770
740
700
650
580
540
500
450
400
600
40% 50%
60%65%
70%
71%
70%
65%
3m
4m
8m
10m
Flow Rate (litres/sec)
Total Head (m)
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 500 1000 1500 2000 2500 3000 3500 4000
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
22
MHH 8x6HIGH HEAD SLURRY PUMP
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
×ØØÙÚÛØ
Ü 560
70 FH6145 527% Chrome
White Iron740/711
27% Chrome White Iron
T 560
PUMP SPECIFICATIONS
0 50 100 150 200 250 300
125
100
75
50
25
0
r/min
1000
NP
SH
4m
2m
Flow Rate (litres/sec)
Total Head (m)
900
30%
800
500
600
700
40% 50% 60%
65%
65%
6m 8m 1
0m
12
m
380
360
340
320
300
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 500 1000 1500 2000 2500 3000 3500 4000 4500
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
23
MAH 10x8METAL LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
ÝÞßàÝßß
F 260
76FAM8147
G81475
Ýáâ ãäåæçè
éäêëè ìåæí686
Ýáâ ãäåæçè
éäêëè ìåæíîï 560
ð ñáòóô 710
PUMP SPECIFICATIONS
r/min
850
825
20%
NPSH 8m
80
70
60
50
40
30
20
10
0
2m800
780
400
440
470
500
540
580
600
625
650
675
700
730
760
4m
10m
6m
40%60%
65%
70%
71%
70%
65%
0 100 200 300 400 500 600
Flow Rate (litres/sec)
Total Head (m)
240
220
200
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 1000 2000 3000 4000 5000 6000 7000 8000 9000
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
24
MAH 10x8RUBBER LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
õö÷øõ÷÷
F 260
76 FAM8147 5
Rubber Lined High Tensile
ùúeel686 Rubberùû 560
PUMP SPECIFICATIONS
r/min
750
700
40%
NPSH 4m
50
40
30
20
10
0
2m
0 100 200 300 400 500
600
500
400
6m
12m
10m8m
50%60%
70%
75%
75%
70%
Flow Rate (litres/sec)
Total Head (m)
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 1000 2000 3000 4000 5000 6000 7000 8000
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
25
MAH 12x10METAL LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
üýýþÿ3ý
S� 560
86FAM10147
G101475
27% Chrome White Iron
76227% Chrome
White IronX (743) 560
PUMP SPECIFICATIONS
r/min
800
NPSH 4m
80
70
60
50
40
30
20
10
0
2m
0 100 200 300 400 500 600
775
750
730
700
675
650
625
600
580
550
3m
6m 8m
20% 40%
60%
70%
75%
78%
80%
78%
525
500
470
440
400
350
300
Flow Rate (litres/sec)
Total Head (m)
240
220
200
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 1000 2000 3000 4000 5000 6000 7000 8000 9000
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
26
MAH 12x10RUBBER LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
�������
�� 560
86 G10147 5Rubber Lined High Tensile
��eel762 RubberG 600
PUMP SPECIFICATIONS
r/min
650
600
20%
NPSH 4m
50
40
30
20
10
0
2m
0 100 200 300 400 500
500
400
300
40%60%
70%
75%
80%
81%
80%
3m
6m
8m
Flow Rate (litres/sec)
Total Head (m)
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 1000 2000 3000 4000 5000 6000 7000 8000
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
27
MAH 14x12METAL LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
����
� 560
90FAM12147
G121475
27% Chrome White Iron
96527% Chrome
White IronT 1200
PUMP SPECIFICATIONS
r/min
600 40%
NP
SH
10
m
70
60
50
40
30
20
10
0
4m
0 200 400 600 800 1000 1200
585
50%60%
70%
75%
77%
75%
70%
550
525
500
470
450
425
400
375
5m 6
m
7m
8m
12
m
350
325
300
Flow Rate (litres/sec)
Total Head (m)
220
200
180
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 2000 4000 6000 8000 10000 12000 14000 16000 18000
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS MAH HORIZONTAL SLURRY PUMPS
28
MAH 14x12RUBBER LINER AND IMPELLER
Outlet/Inlet (mm)
Bearing Frame
Max Power (kW)
Max Particle
Size (mm)Impeller
No. of Vanes
Impeller Material
Impeller/Vane Dia.
(mm)
Wear Liner Material
�������
�� 560
104 G����� 5
R����� ����
High Tensile �!eel
965 RubberG 600
PUMP SPECIFICATIONS
r/min
500
450
40%
NPSH 5m
50
40
30
20
10
0
2m
0 200 400 600 800 1000
400
350
300
8m
6m
3m
4m
50%60%
70%
75%
79%
75%
70%
Flow Rate (litres/sec)
Total Head (m)
160
140
120
100
80
60
40
20
0
Total Head (feet)
0 2000 4000 6000 8000 10000 12000 14000 16000
Flow Rate (USGPM)
Performance curve is for clean, cold water only. Contact us to discuss pump selections for specific applications.
MAH HORIZONTAL SLURRY PUMPS
33
DIMENSIONSGENERAL ARRANGEMENT DRAWING
ModelDimensions (mm) Weight (kg)
A B C D Key E F G H J K L M N U Metal Rubber
1"#$1 % 583 295 248 197 8x7 79 206 181 98 171 46 - 106 19 28 88 77
1.5x1 C - HH 759 406 311 254 12x8 121 306 270 194 254 - 11 121 66 42 318 -
2x1.5 B 592 295 248 197 8x7 79 217 203 114 184 33 - 114 22 28 156 118
3x2 C 768 406 311 254 12x8 121 280 238 138 210 71 - 151 40 42 197 154
3x2 D - HH 986 492 364 330 18x11 164 389 384 254 368 - 51 203 83 65 750 -
4x3 C 843 406 311 254 12x8 121 353 292 149 262 24 - 187 54 42 249 236
4x3 D 943 492 364 330 18x11 164 353 292 149 262 100 - 187 52 65 318 290
4x3 E - HH 1240 622 448 457 22x14 222 492 492 330 432 - 12 248 79 80 1250 -
6x4 D 1021 492 364 330 18x11 164 424 406 229 338 11 - 219 65 65 669 454
6x4 E 1178 622 448 457 22x14 222 433 406 229 338 138 - 219 75 80 885 635
6x4 F - HH 1556 857 634 610 28x16 279 585 616 413 546 - 134 305 75 100 3420 -
8x6 E 1302 622 448 457 22x14 222 557 551 318 460 - 62 292 82 80 1497 982
8x6 F 1507 857 635 610 28x16 279 539 551 318 460 90 - 292 65 100 1814 1390
8x6 T - HH 2275 1150 1040 650 36x20 350 852 835 584 813 - 160 394 - 150 6900 -
10x8 F 1646 991 705 610 28x16 279 683 673 419 635 - 12 333 134 100 3193 2581
1&$' (T 1748 1150 780 650 32x18 280 692 673 419 635 27 - 333 143 120 3742 3130
1)$1& * 1721 991 705 610 28x16 279 753 756 464 673 - 104 381 108 100 3760 2808
1)$1& (T 1816 1150 780 650 32x18 280 762 755 464 673 - 65 381 117 120 4309 3357
1+$1) * 1772 991 705 610 28x16 279 803 937 629 832 - 263 406 105 100 5847 4123
1+$1) (T 1873 1150 780 650 32x18 280 812 937 629 832 - 224 406 114 120 6396 4672
1,$1+ -. 2320 1460 1050 900 36x20 350 953 1048 660 889 - 84 451 167 150 9979 -
)&$1' -. 2475 1460 1050 900 36x20 350 1100 1420 940 1230 - 420 480 210 150 18864 15921
Note: Drawing is indicative only and does not accurately represent how pumps of all sizes will appear.
A
E
M
U
D
C
N
F
L
K
G
H
J
B
MAH HORIZONTAL SLURRY PUMPS
34
No. Part Description Material Specification
1 Base Cast Iron
2 /0245 4140 High Tensile /5eel*
3 Be26789 :;;es<=y T7s>78 ?@2;5 t6o8 BoACD
4 /0245 /=eeve EFH /5278=es; /5eel
5 PIsJ @2;789 Cas5 t6on
6 F62se P=25e K78e6 FLM @06ose N075e t6o8
7 Volute K78e6 FLM @06ose N075e t6o8
8 tsJe==e6 FLM @06ose N075e t6o8
9 T06o25 BI;0 FLM @06ose N075e t6o8
10 Oo785 Q789; QI<<e6
11 Cove6 P=25e Cas5 t6o8
12 /5I44789 Box Cas5 t6o8
13 Expelle6 FLM @06ose N075e t6o8
14 Expelle6 Q789 U25I62= QI<<e6
Bolts Z78V P=25eA /5eel
WX6789; U7567=e QI<<e6
Seals QI<<e6
* Other shaft material options are available.
MATERIALSMETAL LINED PUMPS
METAL EXPELLER
10
12
9
8
1
34
7
6
11
2
5
14 13
MAH HORIZONTAL SLURRY PUMPS
35
MATERIALSRUBBER LINED PUMPS
No. Part Description Material Specification
1 Base Cast Iron
2 Y[\]^ 4140 High Tensil_ Y^eel*
3 Bearing Assembly Timkin (Cast Iron Body)
4 Y[\]^ Y`eeve abc Y^\df`esg Y^eel
5 hijk l\gdfm Cas^ npqf
6 Fp\j_ h`\^_ rdf_p nfg_p^ uivv_p
7 Cov_p h`\^_ rdf_p uivv_p
8 njk_``_p uivv_p lq\^ed High Tensil_ Y^eel
9 w[poat Bush Rubber
10 Cov_p h`\^e Cas^ npqf
11 Y^i]]dfm xqx Cas^ npon
12 Expeller byz l[pqj_ {[d^_ npon
13 Expell_p udfm Natur\` uivv_p
Bolts |df} h`\^_~ Y^eel
O-rings Nitril_ uivv_p
Y_\`g Rubber
* Other shaft material options are available.
METAL EXPELLER(RUBBER EXPELLER AVAILABLE)
13 12
11
9
8
1
34
6
10
2
5
7
MAH HORIZONTAL SLURRY PUMPS
![[ ADGAS_Co Module_04 ] Pipework](https://img.pdfslide.net/doc/110x75/543fef1cb1af9f560a8b4ad0/-adgasco-module04-pipework.jpg)
