Machine Familirization

Wheel Loader alat pemuat

Wheel Loader mechine pemuat yang

menggunakan tenaga diesel engine

Penggunaan Wheel Loader

• Memuat material

• Memindahan material

L 50 E

L 90 E

Attachment Miscellaneous

Attachment Buckets

Aplikasi Wheel Loader

• Pertambangan

• Konstruksi

• Perhutanan (logging)

• Perkotaan

Pertambangan

Konstruksi

Perhutanan

Perkotaan

Instrument panels1 Right instrument panel (switches, rheostat, cigarette lighter,.... hour recorder)

2 Front right instrument panel (switches, ignition switch, programmed selectors)3 Centre instrument panel (central warning, warning and control lamps, display unit, gauges)4 Front left instrument panel (switches, keyboard for display unit)

1. Bucket positioner

2 Detent function, lifting / boom kick-out

3 loating position

4. Single-acting lifting function (optional equipment)

5. Rear window wiper

6. Rear widow washer

7. Secondary steering system (optional equipment)

8 Unassigned

9 Unassigned

10 Air conditioning (optional equipment)

11 Lights

12 Front working lights

13 Rear working lights

14 Rotating warning beacon (optional equipment)

15 Unassigned

16 Unassigned

17 Function selector, Boom Suspension System

(optional equipment)

18 The Boom Suspension System remains engaged in

reverse gear regardless of the speed.

19 Electrical control lever lockout (optional equipment)

20 Rheostat, instrument lighting

21 Cigarette lighter Voltage 24 V.

22 Hour recorder

1 Preheating-- ------- --2 Fully automatic downshifting (1 - 4)Lower end of switch pressed in = Automatic downshifting to 1s gear when required.3 Automatic greasing (optional equipment)For information about the system, see page 154.Control lamp for signal codes is built into the switch. See page 157Upper end of switch pressed in = Downshifting to 1 st gear can I made via either of the kick-down buttons.4 unassigned

4 Ignition switchThe ignition switch has five positions as shown in the figure.0 Switched off (key-turn engine stop)R Radio position1 Running position2 No function3 Starting position

Mode selector, gear-shifting programmed (APS)Position L The machine shifts at low engine speed and low traveling speed.Position M The machine shifts at slightly higher engine speed compared with position L.OBS! If the accelerator is depressed fully in position "L", up-shifting

according to the "H"-position will take place.The best utilization is obtained if the accelerator is not depressed fully, as the

difference in up shifting speed between the modes (L-M-H) will be more noticeable.

Position HThe machine does not shift until higher engine and traveling speeds have been

reached.Preferably used in cases where the machine changes gear when operating uphill or

when the rolling resistance is great.Position AutoThe machine automatically selects the APS mode according to the current operating

conditions to achieve the best comfort and econ­omy.Position SERVICEThe machine starts and operates in the selected gear position. Up shifts and

downshifts on the move are controlled manually.

1 Lever steering, CDC (optional equipment)2 Parking brake3 Gear selector control4 Brake pedal5 Differential lock6 Steering wheel adjustment (optional equipment)7 Brake pedal - _ . .8 Headlight dipper / windscreen washer, direction indicators / horn, windscreen wiper9 Accelerator pedal10 Programmed selector APS11 Hand-throttle control (optional equipment)12 Control lever carrier: working hydraulics, kick-down, engine re­tarding, control lever lockout, Forward/Reverse shifting, For­ward/Reverse activation, horn13 Heating and ventilation14 Arm rest15 Emergency stop 3rd hydraulic function, (optional equipment)16 Activation of detent function for control lever for 3rd hydraulic function, (optional equipment)

1 Lever steering, CDC (optional equipment)•

2 Parking brake

3 Gear selector control

Forward/Reverse

Lever in position F = Operating forward

Lever in position N = Neutral

Lever in position R = Operating rearward

4 Brake pedal

5 Differential lock

6 Steering wheel adjustment (optional equip­ment)

7 Brake pedal

8 Headlight dipper / windscreen washer

9 Accelerator pedal

10 Mode selector

11 Hand-throttle control (optional equipment)

1 Lifting function lever

2 Tilting Lever

3 Control lever for the 3rd hydraulic function (optional equipment)

4 Control lever for the 4th hydraulic function (optional equipment

5 Kick down

6 Horn

7 Engine retarding

8 Directional Gear F-N-R

9 Control lever lockout

10Activating directional gear

1 Fan control

2 Temperature Control

3 Recirculation Control (re-using the air)

2 1

C Tilting forward D Floating Position

B Neutral Position C Lowering Position

A Tilting rearward B Neutral Position

A Lifting position

A Back-rest inclinationPull the handle upward and adjust to the required inclination.

B Lumbar supportTurn the knob to the required setting (hard/soft).

C Height and inclinationPull the handles upward for lifting and downward for lowering the rear and front edge of the seat.Never adjust the height of the seat with the weight adjust­ing wheel

D Adjusting for weightAdjust the seat according to the relevant weight with the adjust­ing wheel. While sitting in the seat try to adjust so that the upward and downward movement ranges are equally distrib­uted. Should not be used for adjusting height.

E Longitudinal (leg room)Pull the bar upward and push the seat (forward/rearward).

F Electrically heated (optional equipment)