Machine No: 14 10 passage Wire drawing machine · 2017-08-18 · loading and on the cooling side for recovery of the material. *Between the heating and cooling side there is an insulating

Machine No: 14

10 passage Wire drawing machine

Machine No: 14 Additional Specifications:

No. of Units:1 *This machine is special for thin wires. *Wire diameter: minimum 0.12 mm maximum 1.5 mm.

Machine: 10 passage Wire drawing machine

Manufacturer: Mario Di Maio, Italy

Model: MDM T 10 NFS

Weight: 820 Kg

Volts: 220 - 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 900 mm

W: 1820 mm

H: 1600 mm

Machine No: 26

Enamel Machine


No. of Units:1 *Used for drying enamel coating. *Has a suction to remove the gas produced by the Enamels. *Constant speed regulator. Heating regulated by an electromechanical clock. *12 v outlet. *Chamber size: 700X650X500 mm. *3 rotating rods with s/s pincers.

Machine: Enamel Machine

Manufacturer: FIOA, Italy

Model:300

Weight: 55 Kg

Volts: 220 v Phase:1 Ph Frequency: 50/60 Hz kW: 2.6 kW

Overall Dimensions: L: 710 mm W: 700 mm H: 1650 mm

Machine No: 27

Table drilling machines


No. of Units:3 *High Speed, high precession, mounted on speed ball bearings. *Switch lamp, holder , belt, rack type drill chuck. *micrometer for hole depth and lens holder. * max drill capcity: 6 mm *spindle travel: 45-50mm * coloum diameter: 60 mm *distance from coloum to spindle center: 115 mm *useful dimensions of ground base: 210 X 190 mm * spindle speeds 1500-3000-5500

Machine: Table drilling machines

Manufacturer: Italy

Model:

Weight: 45 kg

Serial No.:

Volts: 220 v 0.25 hp

Phase:1 pH

Frequency: 50/60 Hz

kW:

Overall Dimensions:

L: 600 mm

W: 300 mm

H: 550 mm

Machine No: 36

Casting electronic oven


No. of Units:1 * Automatic electrical furnace for casting. * Suitable for 1 kg. gold and its alloys, 750 gr of silver and its alloys, 650 gr of brass or 700 gr of bronze. * Max temp: 1100oC. * Needs no regular servicing or special maintenance. * All functions are automatic and a video display warns the operator when the temperature has been reached

Machine: Casting electronic oven

Manufacturer: Cavallin, Italy

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

kW: 1.1 kW

Overall Dimensions:

L: 270 mm

W: 270 mm

H: 400 mm

Machine No: 37

Belt Furnace 70 mm


No. of Units:1 *Belt furnace for soldering, annealing etc. *Heating chamber size 1500 mm. *Cooling water chamber 2000 mm. *With Gas protection system. *Maximum temperature: 1100 o C. * A winder( sold separately) can be attached as in the picture.

Machine: Belt furnace 70 mm

Manufacturer: GB Bertoncello, Italy

Model: 42.207

Weight : 900 Kg

Serial No.: 220912

Volts: 230-380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 18 kW

Overall Dimensions:

L: 950 mm

W: 5000 mm

H: 1550 mm

Machine No: 38

Belt Furnace – 70 mm


No. of Units:1 *70 mm belt furnace for soldering and annealing. *Heating chamber size:1650 mm. *Cooling chamber size: 2110 mm. *With gas protection. *The furnace has 2 heating zones. *The muffel is built in refractory steel. *The furnace has a timer for firing and quenching and to automatically stop the belt and cooling water. *Width of belt 70 mm

Machine: Belt Furnace 70 mm

Manufacturer: Italimpianti, Italy

Model: FN 70

Weight: 900

Volts: 230-380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 16.5 kW

Overall Dimensions:

L: 900 mm

W: 5390 mm

H: 1100 mm

Machine No: 39

Belt Furnace 110 mm Machine No: 39 Additional Specifications:

No. of Units:1 *Belt furnace for soldering, annealing etc. *Heating chamber dimensions 120X60X1500 mm. *Water cooling chamber length 2030 mm. *Motor power- 0.18 Kw. *Maximum working temperature 1100 o C. *With gas protection system * A winder( sold separately) can be attached as in the picture.

Machine: Belt furnace 110mm

Manufacturer: GB Bentoncello, Italy

Model: Master 42.111

Weight: 1100 kg

Serial No.:

Volts: 230-380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 18 kW

Overall Dimensions:

L: 950 mm

W: 5000 mm

H: 1500 mm

Machine No: 40/1, 40/2

Ammonia Cracker

Machine No: 40/1, 40/2 Additional Specifications:

No. of Units:2 * Ammonia Cracker - 3000 Nlt/h. * Working temperature 860 o C

Machine: Ammonia Cracker


Model: DNH3/B

Weight: 230 Kg

Volts: 230-380 V

Phase:3 Ph

Frequency: 50/60 Hz

kW: 7 kW

Overall Dimensions:

L: 490 mm

W: 660 mm

H: 1300 mm

Machine No: 41

Electric furnace for annealing & hardening


No. of Units:1 *The furnace is used for annealing and hardening treatments on deoxidizing atmosphere with one heating zone with slow and instantaneous cooling. * With manual loading and recovery with a mechanical device of the material to be treated. *Two opening mouths - on the heating side of the door for loading and on the cooling side for recovery of the material. *Between the heating and cooling side there is an insulating barrier which allows only the passage of atmosphere protection gas. * It is equipped with a cooling tank and basket for collecting the material. *Max working temperature: 950 O C. *There is an automatic circuit for the entry of process gas. * It has a carter and special safety protections

Machine: Electric furnace for annealing & hardening

Manufacturer: IECO, Italy

Model: Z05 70

Weight: 690 Kg

Volts: 220 – 380 V

Phase: 2 Ph

Frequency: 50/60 Hz

kW: 12 kW


Machine No: 43

Hydraulic Press 500 tons


No. of Units:1 *500 tons Hydraulic press for large dimensions like Placato, degrade chains, etc. *Size of the pressing plates: 455 X 405 mm.

Machine: Hydraulic press 500 tons

Manufacturer: Italy

Weight: 2000 Kg

Volts: 220 – 380 V

Phase: 3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 430 mm

W: 1630 mm

H: 1600 mm

Machine No: 44

Hammering press 50 tons


No. of Units:1 *Hammering hydraulic press - 500 strokes a minute. *With a motor and bobbin to pull the chains.

Machine: Hammering press 50 tons

Manufacturer: Italy

Model: SAE 30

Weight: 2500 Kg

Volts: 220 - 380 V

Phase: 3 Ph

Frequency: 50/60 Hz

Kw: 5.6 kW

Overall Dimensions:

L: 700 mm

W: 700 mm

H: 700 mm

Machine No: 45

Liberation Chain machine


No. of Units:1 *Liberation Chain machine with motorized bobbin to collect the chains and motor for liberation. *With mechanical pump for oiling.

Machine: Liberation Chain Machine

Manufacturer: Emengezetta, Italy

Model: SN

Weight: 170 Kg

Volts: 220 - 380 V

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 630 mm

W: 1300 mm

H: 930 mm

Machine No: 46

Bull Block Machine


No. of Units:1 Bull Block. 245 mm diameter steel down coiler

Machine: Bull Block Machine

Manufacturer: Italy

Volts: 220-380 v

Phase: 3 Ph

Frequency: 50/60 Hz

kW:

Overall Dimensions:

L: 550 mm

W: 900 mm

H: 970 mm

Machine No: 47

Twisting Machine

Machine No: Additional Specifications:

No. of Units: 1 Twisting machine for hand and machine made chains

Machine: Twisting machine

Manufacturer: Oro Meccanica, Italy

Weight: 160 Kg

Volts: 220 v

Overall Dimensions:

L: 560 mm

W: 3580 mm

H: 1080 mm

Machine No: 48

Flat & wire rolling mill


No. of Units:1 *Roll dimensions: left wire head with 23 channels - 160 X 90 d mm. right flat head - 160 X 90 d mm. *With safety security system. * On the side there are 2 rolls for wires. *Double speed 7-14 mt./min. *Maximum rolling torque 113 kg/m.

Machine: Flat & wire rolling mill


Model: MDM LAFIL 160X86

Weight: 635 Kg

Volts: 220 – 380 V

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 3.3 kW

Overall Dimensions:

L: 480 mm

W: 1360 mm

H: 1450 mm

Machine No: 53

Electrical Soldering Machine


No. of Units:11 Hydrogen soldering equipment. flame temperature:3200 deg C. The internal piping must be cleaned before use.

Machine: Electrical Soldering Machine

Manufacturer: Vetter, Germany

Model: Hydromat 1000 ES

Volts: 220 v; 3.2 A

Phase: 1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 260 mm

W: 425 mm

H: 185 mm

Machine No: 54

Electrical Soldering Machine


No. of Units:7 Hydrogen soldering equipment. flame temperature:3200 o C. The internal piping must be cleaned before use.

Machine: Electrical Soldering Machine


Model: Hydromat 1000 STD

Weight:

Serial No.:

Volts: 230 V, 3 A

Phase: 1 Ph

Frequency: 50/60 Hz

kW:

Overall Dimensions:

L: 320 mm

W: 515 mm

H: 210 mm

Machine No: 55

Hot Flame 120


No. of Units:7 Hydrogen soldering equipment. flame temperature:3200 o C. Flame length: 5-150 mm. 0.3 bar. The internal piping must be cleaned before use.

Machine: Hot Flame 120


Model: Hot Flame 120

Weight: 25 kg

Serial No.:

Volts: 220 v, 3 A

Phase: 1 Ph

Frequency: 50/60 Hz

kW:

Overall Dimensions:

L: 350 mm

W: 345 mm

H: 355 mm

Machine No: 57

P.P. Hand Washing Unit


No. of Units: 1 Equipped with: *4 taps * water level device *decantation tank with 5 baths *cartridge filter

Machine: P.P. Hand Washing Unit


Volts: 220 – 380 V

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 0.37 kW

Overall Dimensions:

L: 450 mm

W: 1000 mm

H: 1250 mm

Machine No: 59

Dust Collector Unit


No. of Units: 4+1(new in box) *These dust collectors are self-independent with envelope-style filters. *They use the EZ filter pack and provide high efficient, low maintenance air cleaning. The Ez pack is quick and easy replaceable. *It includes a 5 gallon pail or 55 gallon drum, indoor and outdoor exhaust deflectors, HEPA filter pack and exhaust silencers. *This machine is used along with machine 80.

Machine: Dust collector unit

Manufacturer: Donaldson, USA

Model: # 80 CAB

Volts: 220 -380 V

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 3 kW

Overall Dimensions:

L: 720 mm

W: 740 mm

H: 1550 mm

Machine No: 60

2 Diamond Cut workstation


No. of Units: 25

workstations ( 2 workers each)

1.Two workers diamond cut workstation. 2. Two florescent lights 20 w each 3. S/S dryer 4. Metal screen plate coated with plastic 5. Option to connect a high speed micro grinder on each side. ( machine 60/1).

Machine: 2 Diamond Cut workstation

Manufacturer:Home manufacture

Volts: 220 v

Phase: 1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: mm

W: mm

H: mm

Machine No: 60/1

Micro High speed grinder

Machine No: 60/1 Additional Specifications:

No. of Units:51 *Perfectly designed for powerful and delicate cutting and grinding, slim and light weight for comfortable gripping. * High performance and accuracy, compact, high reality and superior durability. *Carbon brushes with long life. The switch provides click sensation. Motor speed is1000-35000 rpm. *There is a special dust protection mechanism. *High performance Samarian cobalt magnet. Very low rpm variation in load changes. *Quiet and steeples speed control. *Digital display of the revolutions.

Machine: Micro High speed grinder

Manufacturer: NSK-NAKANISHI, Japan.

Model: SKU-9867

Weight: 4 Kg

Serial No.:

Volts: 220 v

Phase: 1 Ph

Frequency: 50/60 Hz

kW: 0.1 kW

Overall Dimensions:

L: 190 mm

W: 95 mm

H: 180 mm

Machine No: 61

Rotating drying machine with infrared heating element.


No. of Units:1 *Stainfree drying-process which can be obtained with wet parts, rotating in open end barrels with maizorb as a media. * 30 O tilted open end barrel with Maizorb can be loaded with wet jewelry parts . *An infrared heater accelerates drying within a few minutes. * It is unloaded by turning down the barrel to enable easy separation without damaging the parts. * A step in the screen turns the parts and allows proper separation from the Maizorb.

Machine: Rotating drying machine with infrared heating element.

Manufacturer: Dreher, Germany

Model: Th 25 S

Weight: 120 Kg

Serial No.:

Volts: 220 – 380 v 4.7 A

Phase:3 Ph

Frequency: 50/60 Hz

kW: 2 kW

Overall Dimensions:

L: 970 mm

W: 750 mm

H: 1650 mm

Machine No: 63

Drying Oven with 8 shelves


No. of Units:1 *Working temp: up to 300 O C *Drying oven for Jewelry. 8 s/s racks of size: 465 l X665wX35h mm. * there are additional 4 shelves. *Chamber size: 620X740X1240h mm.

Machine: Drying Oven with 8 shelves


Model: ESS.TE

Weight: 150 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 9 Kw

Overall Dimensions:

L: 710 mm

W: 900 mm

H: 1660 mm

Machine No: 64

Centrifugal drying machine


No. of Units:1 *The machine is equipped with a heating element of 1.5 Kw and a motor of 1 Hp ( 766 W) *The Maximum temperature is 200 o C. * Is also equipped with temperature control and time control. * With safety latch. *Made from stainless steel. *The basket is extractable and dynamically balanced. *The start and stop motions of the basket are controlled by an invertor. *The machine is fitted with a potentiometer to regulate the speed from 0 - 1400 rpm.

Machine: Centrifugal drying machine


Model: IE/E

Weight: 120 Kg

Serial No.: 566

Volts: 220 – 380 V

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 1.5 +0.766 = 2.266 Kw


Machine No: 66

Special P/P equipment for brightening


No. of Units:1 *Complete with mastering pump, solenoid valve and 3 pedal control. *2 s/s heated tanks (3.5 Kw each) for containing different concentration of solutions. *Size of the tanks: 450X450X550d mm. * 2 electrical pumps (0.09 Kw each) and controlled by pedal or switchboard. *Air controlled pump for dosing the reagent controlled by switchboard or pedal. *Level control by electronic floats. *1 s/s inox basin (400X650X400 d mm)where the reaction takes place with discharging drainage into a bottom settling tank. *Protection hood and frontal panel. *Washing fumes system into the rear panel of the hood. *1 container for oxidizer reagent( 66/2) *1 extraction fan ( 1.1 Kw). *Settling tank and filtration system ( 66/1) under the inox basin . Main switchboard (66/3) with all controls. 3 positions pedal to control the dosage.

Machine: Special P/P equipment for brightening


Weight: 300 Kg

Volts: 220 - 380 V

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 8.5 kW Overall Dimensions: L: 2100 mm W: 800 mm H: 2000 mm

Machine No: 68

P/P Precipitation container


No. of Units:1 *Made from polypropylene. Is equipped with a heating element. *The container is covered and has a cone shape and is fitted with a valve at the bottom. *It fits into an iron frame.

Machine: P/P Precipitation container


Weight: 70 kg

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 600 mm

W: 600 mm

H: 1400 mm

Machine No: 69

S/S tank


No. of Units:1 *Used for collecting the solutions *The lower part is conical shaped with a tap. *Has a input pipe at the top and output pipe with a tap at the bottom. *The tank stands on a s/s base. * 900 liters

Machine: S/S tank

Volts: 220-380 V

Phase: 3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 785 mm

W: 785 mm

H: 1480 mm

Machine No: 70

P/P recycling tank with pump


No. of Units:1 *10 mm P/P tank with internal reinforcement *Base made of P/P. *Used to collect the liquid from many different applications *With pump to transfer the solution to external tank.

Machine: P/P recycling tank with pump


Weight: 50 Kg

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

kW: 0.25 Kw

Overall Dimensions:

L: 665 mm

W: 665 mm

H: 810 mm

Machine No: 71- 1/2/3

Apparatus for preparing distilled water for jewelry washing

Machine No: 71-1/2/3 Additional Specifications:

No. of Units:1 Includes 3 separate units: 1.first to make distilled water by the reverse osmosis method - 1 Ph, 220 V, 50/60 Hz of size 380X900X1330h mm. The unit includes a fiberglass bottle size 900X200 d mm which contains 20 lt. of granulated charcoal on a quartzite bed. The unit has nanometers for pressure control, instantaneous flow gauges and electronic metering pump. 2. The second is a tank with high pressure pump to supply water to the wash basin. The water pump specifications are: 230 1 Ph, 50 Hz, 0.75 Hp with a a washing valve, the size is 600X1100X1520h mm. 3. The third unit is a basin with 2 electrically operated taps. The size of this unit is 320X680X205h mm. *In addition, there is 1 special pump for aspiration and delivery of water from storage tank to filtrating column,1 filtration column for purifying water containing soaps, acidity and metallic particles. *The filtration column is able to purify 300l/hr.

Machine: Apparatus for preparing distilled water for jewelry washing


Frequency: 50/60 Hz

Machine No: 73

Ultrasonic sealing


No. of Units:1 Ultrasonic 50 lt. bath, UL 22 KHz

Machine: Ultrasonic sealing

Manufacturer: Italy

Model: 50 RSC TB

Volts: 220 v

Phase: 1 Ph

Frequency: 50/60 Hz

kW: 4.2 kW

Overall Dimensions:

L: 450 mm

W: 700 mm

H: 915 mm

Machine No: 75

Plaiting plant


No. of Units:1 * All additional information on the baths( taps, heating elements , thermocouple etc.) can be observed in the pictures. *The baths are numbered from left to right. * picture: 1X3: 450 X 150 X depth 480 mm each. * picture 2: 350 X 195 X depth 480 mm * picture 3: 350 X 195 X depth 480 mm * picture 4: 350 X 195 X depth 480 mm * picture 5X3 : 450 X 150 depth 480 mm each * picture 6: 350 X 195 X depth 480 mm each * picture 7X3: 345 X 150 depth mm each * picture 8: 345 X 195 x depth 480 mm each. The electrical circuits must be checked and should be re-wired. Estimated expense: € 4,000

Machine: Plaiting plant


Volts: 220-380 v

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 12 Kw

Overall Dimensions:

L: 3700 mm

W: 830 mm

H: 1240 mm

Machine No: 76

Tumbling machine with 2 barrels


No. of Units:1 *Tumbling machine with 2 barrels for collecting the medium. *Speed control. *Timer for turning the tumblers in both directions. * Volume of each barrel 85 l.

Machine: Tumbling machine with 2 barrels

Manufacturer: L.M. Landau, Italy

Volts: 220-380 v

Phase: 3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 1010 mm

W: 1290 mm

H: 1390 mm

Machine No: 78

Train Tumbling unit


No. of Units:1 * The tumbling machine comes with timer and variable speed. It is possible to use different sizes of tumbling for different kinds of jobs: wet and dry process with different media (ceramic, plastic, porcelain, nuts, wooden, natural granulates, etc.). * Easy washing and sieving of the jewelry. * The unique sliding workstation allows to remove individual barrels for loading or unloading parts without interrupting the operation of the other barrels. Is also equipped with a water gun for rinsing. * The kickstand enables fast and easy removal of barrels. * Water removal under machine allows area above to be dry and clean. *Water deposit and settlement container allows metals to settle at the bottom. Sup pump for water removal. * *1 barrel with 3 compartments of 12.5 lt each, second barrel with similar external size but with 2 compartments of 19 lt each, and 3 more barrels with four compartments of 5 lt. each. * tank cascade system for deposition of the waste(gold, silver etc.

Machine: Train Tumbling unit


Model: VT5 VT

Weight: 400 Kg

Volts: 220-380 V

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 0.75 kW

Overall Dimensions:

L: 1330 mm W: 3750 mm H: 1100 mm

Machine No: 79

Train Tumbling unit


No. of Units:1 *Comes with timer and variable speed. It is possible to use different sizes of tumbling for different kinds of jobs: wet and dry process with different media( ceramic, plastic, porcelain, nuts, wooden, natural granulates, etc.). Easy washing and sieving of the jewelry. * The unique sliding workstation allows removable of individual barrels for loading or unloading parts without interrupting the operation of the other barrels. *Is also equipped with a water gun for rinsing. * The kickstand enables fast and easy removal of barrels. *Water removal under machine allows area above to be dry and clean. * Water deposit and settlement container allows metals to settle at the bottom. * Pump for water removal. * One barrel with 3 compartments of 12.5 lt. each, second barrel with similar external size but with 2 compartments of 19 lt. each, and 3 more barrels with four compartments of 5 lt. each. * tank cascade for deposition of the waste (gold, silver etc.)

Machine: Train Tumbling unit


Model: VT5 VT

Weight: 400 kg

Serial No.:

Volts: 220-380 V

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 0.75 kW


Machine No: 80

Polishing Bench

Machine No:80 Additional Specifications:

No. of Units: 6 *On each bench 2 separate working positions. *2 self ventilated motors and self-braking. Machine: Polishing Bench

Manufacturer: Fioa, Italy

Volts: 220-380 V * Maximum diameter of buffing brushes - 200 mm. *Adjustable separate lighting for each working place * 2 drawers *frontal metal protection hoods with tempered glass cover. * connection for central suction * safety security system, * The Donaldson dust collectors ( machine no. 59) is used along with these machines

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 3 Kw

Overall Dimensions:

L: 440 mm

W:860 mm

H: 1540 mm

Machine No: 81/1 Dust collector + piping


No. of Units:1 Working Temperature: 80 deg C. * Filter surface : 125 sq. m. * air capacity: 6900 cbm/h. * no. of cartridges: 8 units of height 1000 mm and diameter 325 mm * Air pressure : 6 bar. * No. of solenoid valves : 4 X1.5 " Suction fan : Power 5.5 Kw noise 75 dB RPM: 1400 head : 200 mm

Machine: Dust collector + piping

Manufacturer: Air Compact

Model: VEP 512

Volts:220-380 v

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 5.5kW

Overall Dimensions:

L: 1700mm

W: 1150mm

H: 4030mm

Machine No: 81/2 Dust collector + piping


No. of Units:1 Working Temperature: 80 deg C.

Machine: Dust collector + piping

* Filter surface : 125 sq. m. * air capacity: 6900 cbm/h. * no. of cartridges: 8 units of height 1000 mm and diameter 325 mm * Air pressure : 6 bar. * No. of solenoid valves : 4 X1.5 " Suction fan : Power 5.5 Kw noise 75 dB RPM: 1400 head : 200 mm

Manufacturer: Air Compact

Model:VEP 512

Volts: 220-380 v

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 5.5kW

Overall Dimensions:

L: 1700 mm

W: 1150 mm

H: 4030 mm

Machine No: 91

Hand Metal Detector with charger


No. of Units: 4

Machine: Hand Metal Detector with charger

Manufacturer: Ceia, Italy

Model: PD 140 SR

Weight: 2.4 Kg

Volts: AC 110/220 v

Phase: 1 Ph

Frequency: 50/60 Hz

kW: 4 VA each

Machine No: 99+306

Chiller

Machine No: 99+306 Additional Specifications:

No. of Units: 2

Machine: Chiller

Manufacturer: MTA, Italy

Model: TAE 015

Weight: 157 Kg

Volts: 220 – 400 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 3.3 kW

Overall Dimensions:

L: 1090 mm

W: 540 mm

H: 1050 mm

Machine No: 105

Polishing bench


No. of Units:1 Polishing bench with two workstations.

Machine: Polishing bench

Manufacturer: FOV Italy

Model: PI140 R2 T2

Volts: 220-380 v

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 2 Kw

Overall Dimensions:

L: 440 mm

W: 860 mm

H: 1540 mm

Machine No: 106 Centrifugal vibration machine for deburring and polishing


No. of Units:1 *Circular vibrator with a tridimensional motion.

Machine: Centrifugal vibration machine for deburring and polishing

*Practical, economical but especially resistant due to the bowl being realized in anti-ware polyurethane. * It has independent discharge of the pieces. * Ideal for polishing precious metals with spheres with the possibility of using the machine for deburring and smoothing, always using a wet process. * Independent electrical control panel with speed selector. * Internal diameter of cylinder: 350mm *Depth of the cylinder: 170 mm.

Manufacturer: Metal finishing, Italy

Model: MF 91

Weight: 350Kg

Serial No.:

Volts: 220-380v

Phase: 3 pH

Frequency: 50/60 Hz

kW: 1.45 Kw

Overall Dimensions:

L: 1100 mm

W: 900 mm

H: 1360 mm

Machine No: 107 Mettler scale


No. of Units: 2

Machine: Mettler scale

Manufacturer: Mettler, Swizerland

Model: ViperSw 1.5



No. of Units:1


Manufacturer: Mettler, Swizerland

Model: Mettler PB 3002-S



No. of Units:2


Manufacturer: Mettle, Switzerland

Model: Mettler PE 3600



No. of Units:1 Machine: Mettler scale

Manufacturer: Mettler, Switzerland

Model: Mettler PE 3000

Weight:

Serial No.:

Volts:

Phase:

Frequency:

kW:

Overall Dimensions:

L: mm

W: mm

H: mm



No. of Units:1 laboratory balance from Mettler, type PC 2000. Technical specifications: 220 V, 50 Hz. Weighing capacity: 2000 g. Readability: 0,01 g. Housing (D)x(H)x(W): 29 x 12 x 18,5 cm. Pan size (ø): 14,5 cm.


Manufacturer:

Model: Mettler PC 2000

Machine No: 112

Washing Unit with 2 basins


No. of Units:1 Two s/s basins with dimensions: 500X600X290 depth.

Machine: Washing Unit with 2 basins

Manufacturer: Fioa, Italy

Overall Dimensions:

L: 670 mm

W: 2320 mm

H: 1420 mm

Machine No: 114 Mettelr scale


No. of Units:1


Manufacturer:Mettler, Switzerland

Model: Mettler PM 4600

Machine No: 115

Flat Rolling Mill 60 X 40 mm


No. of Units:1 *Flat rolling mill. * Diameter of rolls : 60 mm * width of the cylinder: 40 mm

Machine: Flat Rolling Mill 60 X 40 mm


Model: LSP. 60X40

Weight:

Serial No.: 5G034

Volts: v

Phase: Ph

Frequency: 50/60 Hz

kW: kW

Overall Dimensions:

L: 470 mm

W: 560 mm

H: 1250 mm

Machine No:116 Welding machine


No. of Units:1 *Electronic Tack welding machine with bench. *Excellent pre-blocking of two half stamped jewelry made of any metals. * Simple and functional use of the machine which eliminates the braze-soldering systems. * High precision welding. * big reduction of finishing time and great improvement in precision.

Machine: Welding machine

Manufacturer: G.B. Bertoncello, Italy

Volts: 220 v

Phase: 1 Ph

Frequency: 50/60 Hz

kW: 0.6 kW

Overall Dimensions:

L: 680 mm

W: 850 mm

H: 1240 mm

Machine No:117

Polishing Bench


No. of Units:1 Polishing bench with one motor with 2 workstations

Machine: Polishing Bench

Manufacturer: Licast

Weight: 70 Kg

Volts: 220 -380 V

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 2.2 Kw

Overall Dimensions:

L: 760 mm

W: 1200 mm

H: 1220mm

Machine No: 118 Degreaser Machine


No. of Units:1 *This machine is used for different purposes. * Degreasing of jewelry pieces etc. *The machine is made from S/S. *The machine is fitted with a condenser coil for vapours of a notable surface area. *The tanks are heated by electrical resistors regulated by thermostats, fitted externally at the bottom of the tank and insulated by internal paneling. *The machine is connected to a chiller which inputs water at 5oC. * The water circulates in the spirals on the top part of the machine and prevents the vapours from the tank to escape to the atmosphere.

Machine: Degreaser Machine


Model: SAD

Weight: 65 kg

Serial No.:

Volts: 220-380v

Phase: 3 pH

Frequency: 50/60 Hz

Overall Dimensions:

L: 430 mm

W: 800 mm

H: 1130 mm

Machine No: 119 Degreaser Machine


No. of Units:1 *This machine is used for different purposes. * Degreasing of jewelry pieces etc. *The machine is made from S/S. *The machine is fitted with a condenser coil for vapours of a notable surface area. *The tanks are heated by electrical resistors regulated by thermostats, fitted externally at the bottom of the tank and insulated by internal paneling. *The machine is connected to a chiller which inputs water at 5oC. * The water circulates in the spirals on the top part of the machine and prevents the vapours from the tank to escape to the atmosphere.


Manufacturer: Eurotechne, Italy

Volts: 220 v

Phase: 1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 700 mm

W: 1160 mm

H: 1540 mm (incl. 300 mm frame)

Machine No: 121

Drilling Machine


No. of Units: 3 You tube link: https://www.youtube.com/watch?v=CEEZJNVKUks

Machine: Drilling Machine

Manufacturer: NSK-NAKANISHI, Japan.

Model: Electer GX

Weight:

Serial No.:

Volts: 120 v

Phase: 1 Ph

Frequency: 50/60 Hz

kW: 0.055 kW

Overall Dimensions:

L: 200 mm

W: 200 mm

H: 100 mm

Machine No: 122

Electrical cutting machine


No. of Units:1 Electrical cutting machine for rods with motor and gear.

Machine: Electronic cutting machine

Manufacturer: Opticom

Model Tp-70:

Volts: 220 v 6A

Phase: 1 Ph

Frequency: 50/60 Hz

kW: 1.1 kW

Machine No: 123 S/S wash basin on stand.


No. of Units:1 Size of the basin : 500 X 600 X 300 depth.

Machine: S/S wash basin on stand.

Overall Dimensions:

L: 675 mm

W: 1500 mm

H: 1390 mm

Machine No: 127

Wire welding machine


No. of Units:1 *The machine is use for joining two wires to increase the wire quantity. *Rated capacity 1 kVA *Operating current: 1.3 kA *Idle voltage: 0.45 to 1.15 volt. *8 levels The machine is in good working condition.

Machine: Wire welding Machine

Manufacturer: August Strecker KG, Germany

Model: 1/O

Weight: 45 Kg

Serial No.: 19-143

Volts: 220-380 v

Phase: 3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 590 mm

W: 540 mm

H: 1150 mm

Machine No: 202

Spiral Machine for different sizes of bars


No. of Units:1 *Spiral making machine for different sizes of bars. The factory used it normally for 10 mm bars but can be used for sizes below and above. *As seen in the picture 1 the screw to be replaced *The door to the electricity has to be repaired. * We estimate that the max expense for the repairs will be $ 300. *Pedal Operated.

Machine: Spiral Machine for different sizes of bars

Manufacturer: Italy

Weight: 130Kg

Volts: 220-380 v

Phase: 3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 460 mm

W: 620 mm

H: 1070 mm

Machine No: 204

Semi-Automatic Sawing machine


No. of Units:1 *Semi-automatic Sawing machine for various items. *Air pressure system. *Cooling system with pump. * The motor is on a base with 3 columns and a piston for upward and downward movement.

Machine: Semi-Automatic Sawing machine

Manufacturer: Home Manufacture

Volts: 220-380 v

Phase:3 ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 550 mm

W: 740 mm

H: 1260 mm

Machine No: 209

Automatic Sawing machine


No. of Units:1 *Automatic sawing machine with length control of the sawing and possibility to cut different shapes at different angles automatically. *Includes 3 shoulder equipment for straight cuts. *Equipment for inclined cuts, locking piece. * The machine cuts solid and hollow bars of any type of molding and material, 10x10 mm max wit cutting precision +/- 0.04 mm. * cooling system * the movments that can be adjusted: 1. working stroke and forwarding speed. 2. feeding 3 saw unit rotation.

Machine: Automatic Sawing machine

Manufacturer: T.V.N. Italy

Model: SA

Weight: 300 kg

Serial No.: 1939

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 1 Kw

Overall Dimensions:

L: 710 mm

W: 910 mm

H: 1490 mm

Machine No: 210

Pointer Machine


No. of Units:1 *The machine makes pins for earrings with one or two groves and adjustable lengths as per the accessory used. *The machine can stamp a few stamps simultaneously.

Machine: Pointer Machine

Manufacturer: G.B. Meccanica, Italy

Model: GB-PM

Weight: 150 Kg

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 340 mm

W: 830 mm

H: 1060 mm

Machine No: 211

Tubing Forming Machine


No. of Units:1 *Machine for tubing 8 mm for sheet widths: 24.8 mm, thickness: 0.30 - 0.40 mm. * The machine is equipped with a slitter on the backside. * The sheets before converting to tubes are of 24.8 mm width. * the cable connecting the welding part to the power control has to be replaced.

Machine: Tubing Forming Machine

Manufacturer: Lorenzato, Italy

Model: 990 2

Weight: 420 Kg

Volts: 220 – 380 v

Phase: 3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 840 mm

W: 1720 mm

H: 1370 mm

Machine No: 212

Wire pointing rolling mill system


No. of Units:1 *Special machine system for wire pointing with automatic forth and back movement. *Left head with 19 channels and right head with 9 channels. *Dimension of the channels 0.8-8.0 mm. *The pointer can be made for each and every thickness above. *The machine is equipped with a timer to control the wire length for the back and forth movement. *Controlled by foot pedal.

Machine: Wire pointing rolling mill system


Model: MDM LAFIL 120

Serial No.: 26 B 041

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz


Machine No: 213

Drawing Bench


No. of Units:1 *Drawing length: 10,000 mm. * Clamp with motor for drawing with speed control. *covers wide dimensions of rods *Two Prismatic Guides. *Cooling system. *Automatic return.

Machine: Drawing Bench

Manufacturer: Oro Mecaanica, Italy

Model: TRCATPR.A

Weight: 1500 Kg

Serial No.: 1258

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 5 kW

Overall Dimensions:

L: 10830 mm

W: 860 mm

H: 1540 mm

Machine No: 214

2 Heads wires rolling mill


No. of Units:1 *Cylinder dimensions: w 175mm, diameter 110 mm. *Right head with 13 channels (9.3-4.54 mm) * left head with 29 channels (4.3-1.16 mm). * 2 speed motor.

Machine: 2 Heads wires rolling mill


Model: M.175 TF

Weight: 1000 Kg

Serial No.: 1258

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 5 kW

Overall Dimensions:

L: 10830 mm

W: 860 mm

H: 1540 mm

Machine No: 215

Drawing Bench


No. of Units:1 *Drawing Length: 5000 mm. *Cooling system. *With motor & gear

Machine: Drawing Bench

Manufacturer: Italy

Model: TA 45.45/0

Weight: 250 kg

Serial No.: 86148381

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 600 mm

W: 610 mm

H: 1070 mm

Machine No: 216

Twisting Machine


No. of Units:1 *The machine is used for twisting and turning various types of chains & different shapes of wires *The machine is without holder.

Machine: Twisting Machine

Manufacturer: G.B. Meccanica, Italy

Model: GB 27

Serial No.: 922003

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 1.5 kW

Overall Dimensions:

L: 800 mm

W: 1300 mm

H: 4500 mm

Machine No: 219

Electric Hardening furnace with vacuum system

for Gold Jewelry


No. of Units:1 * Electric hardening vacuum furnace. * Special for hardening light jewelry. * Maximum working temp: 500o C. * Chamber dimensions: 320X320X400h mm. * Vacuum motor has to be fixed.

Machine: Electric Hardening furnace for Gold Jewelry with vacuum system


Model: Gamma

Weight: 240 Kg

Serial No.: 250910

Volts: 220 – 400 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 6 kW

Overall Dimensions:

L: 870 mm

W: 680 mm

H: 1670 mm

Machine No: 220

Forming Machine


No. of Units:1 Used to make grooves on copper or iron rods for agraffato system

Machine: Forming Machine


Weight: 227 Kg

Serial No.: 91020 A1

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 3 kW

Overall Dimensions:

L: 620 mm

W: 1100 mm

H: 1300 mm

Machine No: 221

Plaiting Plant


No. of Units:1 * All additional information on the baths( taps, heating elements , thermocouple etc.) can be observed in the pictures. *The baths are numbered from left to right. *picture 1X3: 3 baths: 600 X 150 X depth 480 mm each. *picture 2: 1 bath 600 X 300X depth 480 * picture 3: 1 bath 600 X 300X depth 480 * picture 4: 1 bath 450 X 250 X depth 480 * picture 5X4: 4 baths 450 X 150 X depth 480 mm each * picture 6: I bath 450 X 250 X depth 480 mm. * picture 7X2: 2 baths 450 X 150 X depth 480 mm each. * picture 8: 1 bath450 X 250 X depth 480 * picture 9x3: 3 baths 450 X 150 X depth 330 mm each. * picture 10: 1 bath 340 X 195 X depth 330 mm

Machine: Plaiting Plant


Model: IG / AG

Serial No.: 211

Volts: 220-380 V

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 15 Kw

Overall Dimensions:

L: 1240 mm

W: mm

H: 1480 mm

Machine No: 225

Centrifugal drying Machine


No. of Units:1 *The machine is equipped with heating element of 1.5 Kw and a motor of 1 Hp. *The maximum temperature is 200 O C. * With safety latch. *Made from stainless steel

Machine: Centrifugal drying Machine


Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 530 mm

W: 470 mm

H: 860 mm

Machine No: 227

Train tumbling machine for larger production


No. of Units:1 Train tumbling machine for larger production with automatic recycling plant for gold & silver. Comes with timer and variable speed. It is possible to use different sizes of tumbling for different kinds of jobs: wet and dry process with different media (ceramic, plastic, porcelain, nuts, wooden, natural granulates, etc.) for deburring and polishing process. Easy washing and sieving of the jewelry, 1.The unique sliding workstation allows to remove individual barrels for loading or unloading parts without interrupting the operation of the other barrels. Is also equipped with a water gun for rinsing. The kickstand enables fast and easy removal of barrels. 2.Water removal under machine allows area above to be dry and clean. 3. Water deposit and settlement container allows metals to settle at the bottom. Sup pump for water removal. 4. One barrel (TR 36 K 32 D) with 3 compartments of 12.5 lt. each. 5. Second barrel with similar external size but with 2 compartments of 19 lt. each, and 3 more barrels with four compartments of 5 lt. each. 6. tank cascade for deposition of the waste (gold, silver etc.)

Machine: Train tumbling machine for larger production


Model: VT5/ VT

Weight: 400 Kg

Serial No.:

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 0.75 Kw

Overall Dimensions: L: 1330 mm W: 3750mm H: 1100 mm

Maintenance department

Machine No: 228

Milling Machine


No. of Units:1 Milling machine.

Machine: Milling Machine

Model: Super max YCM – 1.5 VS


Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 1400 mm

W: 1520 mm

H: 2080 mm


Machine No: 229

Hydraulic grinding machine Machine No: 229 Additional Specifications:

No. of Units:1 *The machine grinds different areas. *The movement is 600 mm and is equipped with a magnetic table. * with a hydraulic pump for cooling system. * Also has a unit to collect the dust.

Machine: Hydraulic grinding machine

Manufacturer: Equipitop, Taiwan

Model: ESG-3A1020

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 1340 mm

W: 1760 mm

H: 1700 mm


Machine No: 231

Lethe Machine 1000mm


No. of Units:1 Lethe- distance between centers 1000 mm swing in gap: 690 mm, width of gap: 275 mm, width of bed : 300 mm, spindle nose D6, spindle bore diameter 57 mm, morse taper of spindle center M6, spindle speed 20-2000 rpm, metric threads 0.5-14 mm, range of longitudinal feed 0.06-0.82 mm, range of cross feed 0.02-0.29 mm, lead screw diameter 35 mm, Lead screw pitch 6 mm, morse taper of tailstock quill M4, max travel of tailstock 127 mm, tailstock quill diameter 58 mm,. Includes cooling pump.

Machine: Lethe Machine 1000mm

Manufacturer: Yunnan Machinery Tool Work

Model: CY – S 1840 G

Weight: 1400 Kg


Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 5.6 kW

Overall Dimensions:

L: 860 mm

W: 2130 mm

H: 1310 mm

Machine No: 232

Special grinding machine for tools with multi directional head


No. of Units:1 *Special grinding machine for tools etc. with multi-directional head at different angles. * It is a special machine to grind different shapes and is equipped with a magnetic table. * 2 speeds: a. millstone- 150 mm , 3000 rpm. b. millstone – 100 mm, 6000 rpm.

Machine: Special grinding machine for tools with multi directional head

Manufacturer: Invimec, Italy

Model: 80/412 A.T. 401

Volts: 220-380 v

Phase: 3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 930 mm

W: 1190 mm

H: 1610 mm

Machine No: 236

Automatic linishing machine


No. of Units:1 *Belt sanding machine for jewelry (stamping earrings, Machine: Automatic linishing

machine pendants, lockets etc.). * Capacity: 2000-8000 units per hour depending on the shape sizes of the parts. * Automatic controlled vibrating feeding, with variable frequency in order to enable the parts to be sent in the right orientation. *Electronic speed control.

Manufacturer: Laser Gold Machinery

Model: GP-841

Weight: 500 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 4.5 kW

Overall Dimensions:

L: 550 mm

W: 1640 mm

H: 1650 mm

Machine No: 238

Table bench with one motor and 2 workstations.


No. of Units:1 The bench includes a collector motor with filters.

Machine: Table bench with one motor and 2 workstations.

Manufacturer: Italy

Volts: 220 v

Phase: 1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 750 mm

W: 1200 mm

H: 1220 mm

Machine No: 239

Dust Collector


No. of Units:1 * Unimaster dust collector is an economical and effective solution suitable for

a wide range of applications including abrasive blasting, polishing and Machine: Dust Collector

Manufacturer: DCE, USA buffing, grinding, packing of tea or detergents, weighing and mixing of paint

pigments, food processing applications and a host of other operations where

nuisance dust is generated.

*The Unimaster dust collector reduces airborne contaminants from the

working environment, helps improve air quality for your employees and

product quality for your customers. Effective dust control is guaranteed.

*Unimaster is a compact shaker-type, intermittent duty collector with a wide

variety of configurations and filter bag material

Model: UMA 15205AD

Weight:

Serial No.: 94-1101

Volts: 415 v, 4 Hp

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 3 kW

Overall Dimensions:

L: 960 mm

W:770 mm

H: 2280 mm

Machine No: 244

Link-O-Matic


No. of Units:1 * Wire diameter range 0.22-1 mm * Link outside diameter range 2-8 mm. * Wire welding range 0.25 -1.00 mm * Welding power range 0-0.60 * Argon gas (oxidation reducer) can be used. * The machine is installed for using 0.65 mm wire.

Machine: Link-O-Matic

Manufacturer: CPP, USA

Model: 535-22

Weight: 45 Kg

Serial No.: 823193

Volts: 220 v 5 A

Phase:1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 650 mm

W: 520 mm

H: 340 mm

Machine No: 246

Resistance soldering machine


No. of Units: 9 Foot control

http://www2.donaldson.com/toritdce/en-GB/Replacement-Parts-Services/Pages/Filters-Donaldson-Units/Bag-Filters.aspx

Machine: Resistance soldering machine

Manufacturer: Daisy

Model: JM 1

Weight: 22 Kg

Volts: 230 v, 6.3 A

Phase:1 Ph

Frequency: 50/60 Hz

kW: 2.3 Kw

Overall Dimensions:

L: 370 mm

W: 145 mm

H: 340 mm

Machine No: 247 1-5

Manual Press

Machine No: 247 1-5 Additional Specifications:

No. of Units: 5 Manual press for stamping.

Machine: Manual Press

Overall Dimensions:

L: 220 mm

W: 130 mm

H: 395 mm

Machine No: 247/9 Manual pneumatic press with air piston

Machine No:247/9 Additional Specifications:

No. of Units:8 Machine: Manual

pneumatic press with air piston

Manufacturer: Home manufacture

Overall Dimensions:

L: 110 mm

W: 200 mm

H: 260 mm

Machine No: 250

Automatic linishing machine


No. of Units:1 *Belt sanding machine for jewelry (stamping earrings, pendants, lockets etc.). * Capacity: 2000-8000 units per hour depending on the shape sizes of the parts. * Automatic controlled vibrating feeding, with variable frequency in order to enable the parts to be sent in the right orientation. *Electronic speed control.

Machine: Automatic linishing machine


Weight: 500 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 4.5 kW

Overall Dimensions:

L: 550 mm

W: 1640mm

H: 1650 mm

Machine No: 251

2 Heads Rolling mill for flat wire 140 mm diameter


No. of Units:1 *Rolling mill with 2 mechanical & electronic linked rolling machine for wires. * It is possible to assemble suitable rolls for making different profiles. Main shafts rotating in high precision roller bearings with rotation tolerance less than +/- 1.5 µm. *Standard dimension of rolling rings w-40 mm, ext diam. 90 mm, int. diam. 35 mm. *Continuously variable speed (0-120 m/min). * Adjustment of wire widths through central gear operating on both sides simultaneously. * Possible to pull out hand wheel with central gear for individual setting of both sides of the stand. * Continuous fine adjustment of parallelism by different threads (in micro millimeters). * The machine is designed for quick change of rollers. The front part of the roll-stand can be pulled out on 3 bars and after opening of the locking system the front size of the stand is movable for exchange of rollers. * The rolling speed of the machine is set by potentiometer. The speed of the first rolling stand is automatically controlled by electric device. The direction of the arm with the deflection pulley controls the speed of the first rolling machine. The loading force of this arm is adjustable depending on the size of the wire, enabling production of very fine to bigger profile wires. * The second mill is able to operate a single rolling mill. Includes device for rolling with fluids for cooling of work piece, device for straightening the wire before entry, uncoiling device at entrance of rolling mill. It has two sets of rolling shafts made of tungsten/carbide. * Table and stand for take up of automatic measuring device for both directions and electronic measuring device for control of profile highness and profile width. * Electronic device with 2 electronic take ups and sensors to control the width and height. * Automatic adjustment of the machine. A servo-motor automatically opens or closes the rollers when the measuring device indicates a deviation. * A permanent 2 line plotting device which writes the deviation from middle of tolerance. * 1 pair rolling shaft for high precision flattening. * 1 coiling machine type HVE, with oscillating spool such that the wire remains un-bended. The pitch is adjusted by a variator system. The coil length is adjustable up to 120 mm

Machine: 2 Heads Rolling mill for flat wire 140 mm diameter

Manufacturer: HMP - Henrich Mulller, Germany

Model: DW 2 A-T

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz


length. The unit is driven by a special electronic drive system using a constant torque motor. The torque is independent of the speed and the diam. of the spool and is adjusted on a potentiometer button. * Dancer-arm equipment required for small dimensions of wires. This device controls automatically the wire tension and coiling speed. A sensor controls the wire at the entrance and stops the machine if there is no wire.

Machine No: 252

Forming machine


No. of Units:1 *Used to form the sheets on the copper or iron rods (aggraffato system). *This machine is equipped with speed control.

Machine: Forming machine


Model: 990/2

Weight: 420 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 3 kW

Overall Dimensions:

L: 900 mm

W: 1200 mm

H: 2060 mm

Machine No: 254

Wire annealing furnace


No. of Units:1 *This furnace is used for annealing wires. *With 4 independent work stations with motorized collecting bobbins which have electronic speed control. * Two separate temperature controls. * Includes gas protection. * Length of heating chamber: 1700 mm. *Length of cooling chamber: 1300 mm.

Machine: Wire annealing furnace

Manufacturer: IECO, Italy

Model: 08.46D

Serial No.: 255/93

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 13 kW

Overall Dimensions:

L: 720 mm

W: 3400 mm

H: 1580 mm

Machine No: 255

Flat rolling mill


No. of Units:1 *High performance flat rolling mill. *Cylinder dimensions 250 X 140 d mm. *With water cooling system in the cylinder and the other parts. *With air pressure pneumatic part to apply pressure on the sheet.

Machine: Flat rolling mill

Manufacturer: Carl Wezel, Germany

Model: BW - 250

Weight:

Serial No.: 130

Volts: 220-380 v

Phase: 3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 970 mm

W: 1650 mm

H: 1850 mm

Machine No: 256

2 Heads wire rolling mill


No. of Units:1 *Cylinder dimensions: L 175mm W 110 mm. *Right head with 11 channels, left head with 28 channels. *Equipped with motor coiler to collect the wires.

Machine: 2 Heads wire rolling mill


Model: 9903 Weight:

Serial No.: 719

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 700 mm

W: 900 mm

H: 1650 mm

Machine No: 257

Wire drawing Machine


No. of Units:1 *Comes with motor driven collect coiler. *Max ingoing diameter: 2.5 mm, min coming out diameter 0.2 mm. *The rotation of the cones is controlled by electronic motor. *The coiling reel has an independent motorization equipped tension control. *The machine is also equipped with a stop device to stop the machine in case of wire breaking, stop device in case the ingoing wire is not ready to start the work and a pedal. *The coiling unit has a separate motor of 0.25 Kw. * Including manual rolling mill for pointer.

Machine: Wire drawing Machine


Model: TRA11B/E

Weight: 640 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 7.5 kW + pump – 0.15 Kw

Overall Dimensions:

L: 900 mm

W: 2200 mm

H: 1250 mm

Machine No: 258

Flat rolling mill with 2 coilers and motor in 2 directions


No. of Units:1 *Cylinder size 130 X 120d mm. *Flat rolling mill with 2 coilers with motors - 2 directions. *Includes lubrication oil pump for strips. *Water cooling system

Machine: Flat rolling mill with 2 coilers and motor in 2 directions


Model: M. 130/SF

Weight:

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 1000 mm

W: 1500 mm

H: 1500 mm

Machine No: 259

Quattro rolling mill 4 rolls


No. of Units:1 *Quattro rolling mill ( 4 cylinders). * 2 Large cylinders dimensions 120 X 140d mm. * 2 Small cylinders dimensions: 120 X 60d mm. * With control cabinet, dimensions: 500X1000X1000h mm

Machine: Quattro rolling mill 4 rolls


Model: Tetra

Weight: 1200 Kg

Serial No.: SC.ED 158

Volts: 220 – 380 v 32 A

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 1400 mm

W: 940 mm

H: 1600 mm

Machine No: 260

Flat Rolling mill


No. of Units:1 *Cylinder dimensions:200X130d mm

Machine: Flat Rolling mill


Model: M130-200 SF

Weight: 950 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 500 mm

W: 1050 mm

H: 1450 mm

Machine No: 262

Wire rolling mill train


No. of Units:1 *Rolling mill train with 8 heads (diameter range 8.49-4.74 mm), with 1 coiler with motor and second for supplying the wire. *Oil cooling system with pump .

גמור לא

Machine: Wire rolling mill train


Weight: 2500 kg

Serial No.: 91/03

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW:

Overall Dimensions:

L: 650 mm

W: 2800 mm

H: 1280 mm

Machine No: 263

Drawing bench


No. of Units:1 *Drawing bench with 2 Passages *Speed control. *The coiler size is 300(220) mm. *With two drawing dies are lubricated with a liquid and thus reducing the wear of the wire. *Max diameter of hollow wire to draw: 4 mm. *Max diameter of solid wire to draw: 3.5 mm.

Machine: Drawing bench


Weight: 335 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 4.1 kW

Overall Dimensions:

L: 510 mm

W: 1270 mm

H: 1220 mm

Machine No: 264

Flat carbon rolling mill, 60 mm


No. of Units:1 *Flat wire carbon rolling mill. * Cylinder dimensions: width 45 mm and diameter 120 mm. *Production Quantity: 35 m/min. *Maximum thickness: 4 mm. * Minimum Thickness: 0.1 mm. *Cooling system. *Mechanical winder with adjustable translation.

Machine: Flat carbon rolling mill, 60 mm

Manufacturer: Emmegizeta, Italy

Model: LS-45

Weight: 310 Kg

Serial No.: 7249

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 550 mm

W: 1150 mm

H: 1300 mm

Machine No: 265

Drawing bench


No. of Units:1 *Drawing length 2800 mm.

Machine: Drawing bench

Manufacturer: L.M.S.N.C. Italy

Volts: 220 v

Phase: 1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 3620 mm

W: 650 mm

H: 1030 mm

Machine No: 268

Spiral Machine for different forms


No. of Units:1 *Used for making different forms (round, oval, square, triangle etc.). *It also has the possible to use a twisting machine at the time of making the spirals. *The motorization is obtained from a radiomotor, which is controlled by an inverter for obtaining the speed change of the pincers-holder spindle. *It is possible to obtain spirals of predetermined shapes *Also leg pedal operated.

Machine: Spiral Machine for different forms


Model: CETA CO/C

Weight: 225 Kg

Phase:1 Ph

Frequency: 50/60 Hz

kW: 1.1 Kw

Overall Dimensions:

L: 630 mm

W: 1000 mm

H: 1070 mm

Machine No: 269

Special twisting machine for different forms

To be used with machines 268 + 272


No. of Units:1 *Equipped with motor + gear *To twist different shaped wires before making spirals. *Comes with speed control and is used along with the spiral making process.

Machine: Special twisting machine for different forms


Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

Machine No: 270

Wire squeezer machine


No. of Units:1 *Wire squeezer machine Including winder coiler. * upset head * quick changing of rolls *produces different shapes (oval, half oval, half round etc.) *enables to put different impressions etc.

Machine: Wire squeezer machine


Model: SCFB-A0

Weight: 330 Kg

Serial No.: 1254

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 0.75 kW

Overall Dimensions:

L: 850 mm

W: 900 mm

H: 1200 mm

Machine No: 271

Links Machine


No. of Units:1 *Machine for spirals or cutting links of different shapes and diameters (oval, round, etc.)

Machine: Links Machine

Manufacturer: Luigi Del Trozzo

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 400 mm

W: 550 mm

H: 1000 mm

Machine No: 272

Spiral machine for different forms


No. of Units:1 *Used for making different forms (round, oval, square, triangle etc.). *It also has the possible to use a twisting machine at the time of making the spirals. *The motorization is obtained from a radiomotor, which is controlled by an inverter for obtaining the speed change of the pincers-holder spindle. *It is possible to obtain spirals of predetermined shapes *Also leg pedal operated.

Machine: Spiral machine for different forms


Weight: 225 kg

Model: CETA CO/C

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

kW: 1.5 Kw

Overall Dimensions:

L: 630 mm

W: 1000 mm

H: 1070 mm

Machine No: 273

Engraving Machine


No. of Units:1 *The machine is used for engraving with 3 wheels, for different kinds of wires. *Coiler with motor to collect the wires.

Machine: Engraving Machine


Model: ROL – 3

Weight: 180 Kg

Serial No.: 60418F4

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

kW: 0.37 kW

Overall Dimensions:

L: 700 mm

W: 900 mm

H: 1170 mm

Machine No: 275

Quattro flat rolling mill with coiler in two directions 160 mm


No. of Units:1 * Quattro flat rolling mill with two coilers working in both directions and automatically reversible. *The required thickness of the sheets is adjusted automatically. *It is able to operate as two-high and four-high machine. *It is used for flattening and calibration of strips. * Main shafts rotating in high precision rolling bearings with tolerance of less than +/- 2.5 µm. standard dimensions of rolling rings(interchangeable) width:160 mm, ext. diameter:160 mm, int. dia.: 75 mm. * Speed continuously variable (0-60 m/min). * Adjustment of wire widths through central gearing operation and both sides automatically. * The hand wheel with central gear can be pulled out for parallel adjustment of rollers. * The machine is equipped with a fine parallel adjustment device, operating continuously to get parallelism in µm range. * The machine is equipped for quick exchange of the rollers. The front part of the roll-stand can be pulled out on 3 bars and after opening of the locking system the front size of the stand is movable for exchange of rollers. * Drive of the main axles is through universal joint-shafts, the pin on gears rotate in completely closed gear box with oil. * The rolling speed is set on the panel and is visible on a read-out. * Is equipped with a frame to operate as a four-high machine. Diam. of operating rollers: 50 mm, width of rollers: 160 mm. This device can be installed between the two main shafts and is preloaded against the rollers even in separated condition. * Has a device for rolling with fluids for cooling of the work piece. Reservoir, pumps, piping, filter with electric indication completely installed, external cooling. Sheet metal elements to return the fluid to the box. * Programmable adjustment of the machine. A servo-motor on top of the rolling will automatically or programmable adjust the rollers. All controls are digital. * Digital read-out gauge for control of fine adjustments. 14 Also includes one coiling machine type HST and one uncoiling machine HST for DW 4A reversing system to operate in both directions. Special uncoiling machine for metal sheets for coiling/uncoiling to operate in both directions. Maximum weight of material on spool: 50 kg. Maximum retaining force:

Machine: Quattro flat rolling mill with coiler in two directions 160 mm

Manufacturer: HMP – Henrich Muller

Model: DW – 4 - 160

Weight: 4650

Serial No.: 5550

Volts: 220 – 400 v

Phase:3 Ph

Frequency: 50/60 Hz


about 1200N. The unit is driven by a special electronic drive system using a constant torque motor. The torque is independent of the speed and the dia. of the spool and is adjusted on a digital setting equipment. The unit is equipped with a base with motor and gears. * Special coiling machine with electronic coiling drive and horizontal main shaft. Self-adjusting speed from 0 - 80 m/min. maximum pulling force 1200 N. * Unit for collapsible spool at both positions width adjustable: 60-110 mm. internal diameter 360 mm, external diameter 400 mm. * Safety cover for both units (together with the rolling machine. Setting is possible only in open position. * Includes 2 internally collapsible spools for take up of flattened wire.

Machine No: 276

Strips washing machine


No. of Units:1 *Used to remove the oil perfectly before annealing. *With 2 brushes. *There are 2 baths: first bath is of liquid soap and the second bath of water. *The process includes recycling and spraying of the liquid cleanser in bath one, spray washing with water in bath 2 and then drying of the strip. *With air drying equipment. *With motor driven coiler to collect the strip.

Machine: Strips washing machine


Weight: 150 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 500 mm

W: 1480 mm

H: 1500 mm

Machine No: 277

Wire Annealing Furnace with 4 channels


No. of Units:1 *Wire Annealing Furnace with 4 channels. *Heating chamber of length 1400 mm *cooling chamber of length 1440 mm.

Machine: Wire Annealing Furnace with 4 channels

Manufacturer: Italy

Volts: 220 – 380 v

Phase:3 Ph

Overall Dimensions:

L: 600 mm

W: 3900 mm

H: 1700 mm

Machine No: 278

Continuous annealing furnace for strips.


No. of Units:1 *Used for annealing strips up to 70 mm. *Water cooling system and drying by fan system and collect the strip on bobbin with speed control. *Heating chamber is at an angle - dimensions: 480X620X1890 mm. *Maximum Temperature: 950 O C. *With gas protection. *Control cabinet size: 480X62X1890 mm. * 2 transformers are out of use (maximum cost € 1000). This expense includes the rewiring of the area.

Machine: Continuous annealing furnace for strips.


Model: Sigma I.070

Weight: 1500 Kg

Volts: 220 – 400 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 16 Kw

Overall Dimensions:

L: 830 mm

W: 5200 mm

H: 1890 mm

Machine No: 279

Electric Static Furnace for Annealing


No. of Units:1 *Used for annealing wires, sheets etc. *Automatic recovery of material. *Automatic cooling system. *Chamber dimension:700X400X200h mm. *With gas protection

Machine: Electric Static Furnace for Annealing


Model: Techno syntesi T1.40

Weight: 1550 Kg

Volts: 220 – 400 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 24 kW

Overall Dimensions:

L: 3440 mm

W: 1500 mm

H: 2200 mm

Machine No: 280

Hammering press 25 tons


No. of Units:1 *This mechanical hammering press has been especially designed for continuous hammering of chains. *The closed-arc press frame made of welded heavy gauge metal sheet, ensures maximum rigidity and accuracy in the chain hammering operation. *The working stroke is adjusted by turning a large size handwheel, thus also ensuring perfect balancing of the rotating masses. The ram is provided with a handwheel for precision adjustment of the work position. *A safety device prevents stalling of the ram, by automatically resetting the stroke when the max. load capacity of the machine is exceeded. *The table is provided with grooved guides for quick fixing of the dies and lighting system for the work area. *Die lubrication is automatic and adjustable; it takes place through the ram and there is provision for oil recovery. *A control panel supervises machine operation with visual indication of operation /malfunction/stop. *The machine is also provided with all the necessary safety guards in accordance with current regulations.

Machine: Hammering press 25 tons

Manufacturer: Mario di Maio, Italy

Model: Hammer 800

Weight: 1050 Kg

Serial No.: PXC 25 BG

Volts: 220-380 v

Phase: 3 ph

Frequency: 50/60 Hz

kW: 3 Kw

Overall Dimensions:

L: 500 mm

W: 680 mm

H: 1450 mm

Machine No: 281

Spiral Machine with programmed cutting


No. of Units:1 *Machine with 2 bobbins for links. *There is an additional cutting size for use with this machine - product 281/1 which is equipped with air piston (picture attached)

Machine: Spiral Machine with programmed cutting

Manufacturer: TEM, Italy

Model: SPN5/C

Weight: 130 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 0.25 kW

Overall Dimensions:

L: 500 mm

W: 510 mm

H: 1080 mm

Machine No: 283

Manual Press


No. of Units:1 Works with foot pedal.

Machine: Manual Press

Manufacturer: FOV, Italy

Overall Dimensions:

L: 560 mm

W: 620 mm

H: 1550 mm

Machine No: 284 5 ton Eccentric press


No. of Units:1 *Press is in good condition

Machine: 5 ton Exocentric press

Manufacturer: Italy

Model:

Weight:

Serial No.:

Volts: 230-380 v

Phase: 3 ph

Frequency: 50/60 Hz

kW:

Overall Dimensions:

L: 800 mm

W: 800 mm

H: 1650 mm

Machine No: 285



No. of Units:1 Automatic Hydraulic press for use with different dies. 1.Equipped with an electronic unit to count the no. of units required, a lighting unit, a radiator and oil cooling. 2. The fast clamping devices make it an exceptional tool for the jewelry and heavy volume industry. 3. Blanking speed of 180 strokes p/m at 10 mm travel. 4.Manual inching for tool setting and hub insertion. 5.Foot pedal stroke. Single cycle stroke. 6.working area for dies: 447X217X200 mm. 7.Micro controller to control the press functions. 8.Special construction for quiet and minimal vibrations. 9. A2/B2 mountings for rapid air feeders, suitable for working in sensitive environments. 10. Advanced control panel for convenient operation. 11. It is also equipped with electronic safety system to stop the operation. 11. With additional bobbin.

Machine: Hydraulic Press 15 tons

Manufacturer: Proment

Model: 15 A

Weight:

Serial No.:

Volts: 380 v

Phase: 3 Ph

Frequency: 50/60 Hz

kW:

Overall Dimensions:

L: 1050 mm

W: 1100 mm

H: 1840 mm

Machine No: 285/6/7 - feeder

Machine No: 285/6/7 - feeder

Additional Specifications:

No. of Units: 3 *Independent digital feeder with an electronic programmable control which makes it easy to operate and the maintenance is minimal. *This feeder is used along with the hydraulic presses 285,286,287 and is controlled through the control panel of the press in order to fix the distance and the quantity.

Machine: Feeder


Model: Feeder

Weight:

Serial No.:

Volts: 220 v

Phase: 1 Ph

Frequency: 50/60 Hz

Machine No: 286




Machine: Hydraulic Press 15 tons


Model:

Weight:

Serial No.:

Volts: 380 v

Phase: 3 Ph

Frequency: 50/60 Hz

kW:

Overall Dimensions:

L: 1050 mm

W: 1100 mm

H: 1840 mm

Machine No: 287

Hydraulic Press 15 tons with digital feeder



Machine: Hydraulic Press 15 tons with digital feeder


Model: 15 A

Weight:

Serial No.:

Volts: 380 V

Phase: 3 Ph

Frequency: 50/60 Hz

kW:

Overall Dimensions:

L: 1050 mm

W: 1100 mm

H: 1840 mm

Machine No: 288

Hydraulic press - 60 tons


No. of Units:1 *Stroke: 100 mm. *Stroke is digitally controlled. *Upper dead point delay and lower dead point delay. *Control with electronic feeder. *Operated with both hands at the same time. Security beams system.

Machine: Hydraulic press - 60 tons


Weight: 550 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 2.2 kW

Overall Dimensions:

L: 1300 mm

W: 750 mm

H: 1650 mm

Machine No: 289

Hydraulic Press


No. of Units:1 *Maximum working pressure: 300 bar. *Maximum speed 5 m/min. *Working speed (stroke mm 15 mm)-90 strokes/min. *Possibility to work with pedal or automatic. *Pressing power - 150 KN. Fixed table dimensions: 380X280 mm. *Comes with a radiator for cooling.

Machine: Hydraulic Press

Manufacturer: Oro Franco, Italy

Model: P15-T4

Weight: 800 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 4.0 kW

Overall Dimensions:

L: 1200 mm

W: 870 mm

H: 1680 mm

Machine No: 290

Exocentric Press 3 tons


No. of Units: 2 *Bench Exocentric Press Automatic with control unit. *With feeder.

Machine: Exocentric Press 3 tons


Weight: 150 Kg

Serial No.:

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 430 mm

W: 530 mm

H: 800 mm

Machine No: 292/1/2/3/4

Automatic Spiral Machine

Machine No: 292 1/2/3/4


No. of Units: 4 *Automatic spiral machine for different shapes and sizes, with automatic length controlled cutting. * Operated by air system. * The machine is equipped with reverse variable speed motor for creating right or left spirals, a pin holder, a sliding wire holding trolley and a cutting unit. * The spindle turns with pneumatic collect 1500/min. *max spiral diameter: 12 mm. min spiral diameter: 3 mm. *max wire diameter: 3 mm, min wire diameter: 0.3 mm * max collect opening 14 mm, max collect closing 1 mm.

Machine: Automatic Spiral Machine


Model: AVAUT

Weight: 130 Kg

Serial No.:

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

kW: 1 Kw

Overall Dimensions:

L: 930 mm

W: 710 mm

H: 1450 mm

Machine No: 293/1/2/3/4/5

Saw Machine with progress and lubrication


No. of Units: 5 *Automatic sawing machine to cut different shapes of links. * It can be used for different kind of works using the wide plane. *The leaning of the blade from the work plane can be adjusted through an adequate hand wheel. * The spindle has 3 variable speed rotation through pulleys and steps. * The advancement group is effected through a gear motor at direct current and a potentiometer controls the regulation of the advancement speed from the minimum to the maximum. *Operated by air pressure.

Machine: Saw Machine with progress and lubrication


Model: SEAVM

Weight: 150 Kg

Serial No.:

Volts: 220-380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 0.75 Kw + pump- 0.08 Kw

Overall Dimensions:

L: 690 mm

W: 700 mm

H: 1070 mm

Machine No: 294/1/2/3/4

Flat rings machine with rolling mill

Machine No: 294 1/2/3/4


No. of Units: 4 *Used for different purposes: to straighten the links, flatten links and to emboss the pattern on the link. *A screw and geared wheels system consents an easy operation of the light between the two rollers. *The machine is able to work automatically without the intervention of the operator until the completion of the wanted quantity. * be squeeze 0.2 mm *Max thickness of links squeezed:3 mm, min thickness:0.2 mm

Machine: Flat rings machine with rolling mill


Model: SMAG

Weight: 100 Kg

Volts: 220 - 380 v

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 0.75 kW

Overall Dimensions:

L: 320 mm

W: 515 mm

H: 900 mm

Machine No: 295

Sawing Machine


No. of Units:1 Sawing machine for different parts.

Machine: Sawing Machine


Weight: 50 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 520 mm

W: 680 mm

H: 1300 mm

Machine No: 296

Semi Automatic Spiral Machine


No. of Units:1 Used for making different forms (round, oval, square, triangle etc.).

Machine: Semi Automatic Spiral Machine

Manufacturer: Home manufacture

Volts: 220 - 380 v

Phase: 3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 500 mm

W: 1060 mm

H: 1200 mm

Machine No: 298 and 298/1

Chain making machine


No. of Units:1 *The machine enables to make links chains. *At present the wire guide (no. 298/1) is assembled on this machine. *The price below does not include the cost of the wire guide. * Additional 2 sets of chains is included

Machine: Chain making machine


Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 500 mm

W: 680 mm

H: 1540 mm


No. of Units:1 *This guide is assembled on Chain making machine (no. 298). *It can be assembled on any suitable machine. *The guide unit automatically guides the hollow wire to the machine.

Machine: Automatic hollow wire guide


Model: TEM 55

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 500 mm

W: 680 mm

H: 1540 mm

Machine No: 300

Engraving Machine


No. of Units:1 *Used for engraving different kinds of wires supplied by bobbins. *With 2 wheels.

Machine: Engraving Machine

Manufacturer: G.B. Meccanica , Italy

Weight: 160 Kg

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 560 mm

W: 720 mm

H: 1140 mm

Machine No: 303

Static annealing furnace


No. of Units:1 *Used to prevent surface oxidation during annealing operations and for de-oxidation of finished products. *It ensures even heat treatment of the work pieces so that they come out deoxidized and bright. *It is also fitted with a patented cooling chamber. *The furnace has an electronic device which automatically sets the de-oxidation time. *Independently from the weight of the weight of the material to be annealed. *With gas protect and water cooling system. *Heating channel size: 420 w, 220 h mm. * The s/s tray for moving the material to the water after annealing must be repaired.

Machine: Static annealing furnace


Model: FD/D

Weight: 600 kg

Serial No.: 411

Volts: 220 – 380 v

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 11 Kw

Overall Dimensions:

L: 2600 mm

W: 1200 mm

H: 1800 mm

Machine No: 305

Degreaser Machine


No. of Units: 1 *This machine is used for different purposes. * Degreasing of jewelry pieces etc. *The machine is made from S/S. *The machine is fitted with a condenser coil for vapours of a notable surface area. *The tanks are heated by electrical resistors regulated by thermostats, fitted externally at the bottom of the tank and insulated by internal paneling. *The machine is connected to a chiller which inputs water at 5oC. * The water circulates in the spirals on the top part of the machine and prevents the vapours from the tank to escape to the atmosphere.



Model: SAD /09

Weight: 100 kg

Volts: 380 V Phase: 3 Ph Frequency: 50/60 Hz

Overall Dimensions:

L: 1560 mm

W: 400 mm

H: 1450 mm

Machine No: 308

Belt furnace 140 mm


No. of Units:1 140 mm belt furnace for soldering and annealing. *Heating chamber size:2730 mm. *Cooling chamber size: 3630 mm. *With gas protection.

Machine: Belt furnace 140 mm


Model: FN 140

Weight: 1200 kg

Volts: 220 – 380 v

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 21 Kw

Overall Dimensions:

L: 860 mm

W: 8000 mm

H: 1400 mm

Machine No: 309

Static Drying Oven


No. of Units:1 *Table drying oven with 3 shelves for drying wires, sheets etc. *Internal dimensions: 440X450X480 mm

Machine: Static Drying Oven


Weight: 80 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW:

Overall Dimensions:

L: 550 mm

W: 560 mm

H: 740 mm

Machine No: 311

Slitter machine with 3 interchangeable heads

311/a, 311/b,311/c


No. of Units: 1+ 3 heads * 311/a first head: for cutting 4 strips of 13 mm width. * 311/b second head: for cutting 3 strips with widths: 38 mm, 2X33.5mm * 311/c third head: for cutting 5 strips 3X16 mm, 2X18.2 mm *Easy and fast replacement of heads. Possibility to change the knives sizes for the above heads. *The machine comes with a steel table for easy replacement of the heads. *Max thickness to be sheared 2.3 mm *cut speed 5.2/min * includes metal table at the height of the machine for easy changing of the heads.

Machine: Slitter machine with 3 interchangeable heads


Model: CP/120

Weight: 260 Kg

Serial No.:

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 2.2 Kw

Overall Dimensions:

L: 630 mm

W: 830 mm

H: 1080 mm

Machine No: 315

Manual Guillotine


No. of Units:1 Length of knife: 505 mm with two spring pressure units for holding the sheets.

Machine: Manual Guillotine


Model: GZIE

Weight: 80 Kg

Overall Dimensions:

L: 660 mm

W: 770 mm

H: 600 mm

Machine No: 320

Slitter Machine


No. of Units:1 Slitter machine for cutting 4 strips of width 11 mm

Machine: Slitter Machine 1. Set of blades: 33.6 mm 2. Set of blades: 18.2 mm 3. Set of blades: 10.9 mm

The blades require sharpening.

Manufacturer: MBV, Italy

Volts: 220-380 v

Phase: 3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 400 mm

W: 500 mm

H: 1100 mm

Machine No: 323

Slitter machine with variable cut.


No. of Units:1 *Slitter machine with variable cut and coiler + de-coiler with motor. *Equipped with control for length of cut, with knife set of 4 mm thickness. *The machine is equipped with a plate-guide which facilitates the linearity of the cut. * Max cut width: 100 mm *max plate thickness : 0.8 mm *diameter of shear: 80 mm. * Pedal operated.

Machine: Slitter machine with variable cut.


Model: Citare.1.0.

Weight: 130 Kg

Serial No.: 1143

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 0.75 Kw

Overall Dimensions:

L: 900 mm

W: 750 mm

H: 1050 mm

Machine No: 325

Round Calendar


No. of Units:1 *The machine makes different shapes and profiles for the production of bracelets, earrings and rings. *The machine is also able to make fancy engraving.

Machine: Round Calendar

Manufacturer: G.B. Meccanica , Italy

Model: GB-03

Weight: 35 Kg

Serial No.: 342006

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 420 mm

W: 420 mm

H: 1150 mm

Machine No: 326

Wire squeezer machine


No. of Units:1 *Includes: winder coiler * upset head * quick changing of rolls * produces different shapes (oval, half oval, half round etc.) * enables to put different impressions.

Machine: Wire squeezer machine


Weight: 330 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 0.75Kw

Overall Dimensions:

L: 950 mm

W: 560 mm

H: 1200 mm

Machine No: 327

Wire drawing machine, 6 passages


No. of Units:1 *Comes with motor driven collect coiler. *Max ingoing diameter: 2.5 mm, min coming out diameter 0.2 mm. *The rotation of the cones is controlled by motor.

Machine: Wire drawing machine, 6 passages

Manufacturer: Italy

Weight: 200 kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 530 mm

W: 1500 mm

H: 1300 mm

Machine No: 328

Winder machine with bobbin


No. of Units:1 Used to wind the strips up to 90 mm, equipped with motor and speed control.

Machine: Winder machine with bobbin


Model: GB A

Weight: 60 Kg

Serial No.: 240311

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

kW: 0.2

Overall Dimensions:

L: 500 mm

W: 530 mm

H: 1100 mm

Machine No: 401

Hydraulic Guillotine


No. of Units:1 1.Cutting length: 3100 mm.

Machine: Hydraulic Guillotine

2.Maximun cutting thickness: 6 mm of steel ST 42 or 4mm S/S. Front arms with slots for initial measurement. 3. Special lighting to exactly mark the cutting line. 4. Electrical backside 1000 mm length with digital NC control made by Nova Italy. 5. 17 special holders for holding the sheets. 6. Ball bearing on the table for easy feeding. 7. No of cuts per min: 20 8. with pedal operation.

Manufacturer: Baykal, Turkey

Model: HGL 3100X6

Weight: 6000 Kg

Serial No.: 7669

Volts: 220-380 v

Phase: 3 Ph

Frequency: 50/60 Hz

kW: 11 kW

Overall Dimensions:

L: mm

W: mm

H: mm

Machine No: 510

Plaiting Machine


No. of Units:1 Plaiting unit for rhodium, gold etc.

Machine: Plaiting Machine

Manufacturer: Shoroplate, USA

Model: EPS 2030

Volts: 220 v

Phase: 1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 290 mm

W: 350 mm

H: 190 mm

Machine No: 512


No. of Units:1 *Machine with 4 bobbins for collecting wires or strips in an

Machine: accurate and systematic manner. *The machine is placed on wheels.

Manufacturer: Peter Koch, Germany

Weight: 80 Kg

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 500 mm

W: 700 mm

H: 1120 mm

Machine No: 513

Wire rolling mill train


No. of Units:1 *Rolling mill train with 12 heads diameter range 0.97-2.24 mm, with 1 coiler with motor and the second coiler for supplying the wire. *Oil cooling system with pump.

Machine: Wire rolling mill train.


Weight: 2500 kg

Serial No.: 90/06

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

Overall Dimensions:

L: 650 mm

W: 3660 mm

H: 1220 mm

Machine No: 514

Tube filling machine


No. of Units:1 *This machine is used for filling sand and other fillings into Machine: Tube filling machine

Manufacturer: tubes. *It is equipped with a vibrator with a container with heating element inside for drying the filling and an apparatus to alter the height to which the filling is filled.

Model:

Weight:

Serial No.:

Volts: 220 v

Phase:1 Ph

Frequency: 50/60 Hz

kW:

Overall Dimensions:

L: 800 mm

W: 660 mm

H: 3480 mm

Machine No: 517

Eccentric press 20 tons


No. of Units:1 *Automatic exocentric press with feeder and bobbin.

Machine: Eccentric press 20 tons

Manufacturer: Italy

Model: SB 201 M

Weight: 900 Kg

Volts: 220 – 380 v

Phase:3 Ph

Frequency: 50/60 Hz

kW: 1.5 Kw

Overall Dimensions:

L: 850 mm

W: 950 mm

H: 1820 mm

Machine No: 520

Microscope


No. of Units:1

Machine: Microscope *magnifies 25 times *Large zoom range and long-working distance *Inclination of 45o

Manufacturer: Nikkon, Japan

Volts: 220

Phase: 1 ph

Frequency: 50/60 Hz

Documents

Machine No: 14 10 passage Wire drawing machine · 2017-08-18 · loading and on the cooling side for recovery of the material. *Between the heating and cooling side there is an insulating