The RIONOTE Multifunction Measurement System can be used for measuring vibrations by connecting a piezoelectric accelerometer. Because the unit supports up to four input channels, simultaneous 3-axis measurement (such as for two horizontal axes and one vertical axis) or measurement at multiple locations can be easily realized. Thanks to its light weight (only about 1.2 kg), small dimensions, and battery driven operation, the RIONOTE is eminently portable, making vibration measurement and analysis in the field a snap. The illustration below shows a setup for measurement and FFT analysis of vibrations in rotational machinery. Measurement is carried out simultaneously at one point each for the horizontal (H) and axial (A) direction, and two points for the vertical direction. The extensive lineup of piezoelectric accelerometers offered by Rion includes many different types such as very small and lightweight units, high-temperature resistant units, and units with simultaneous output for three directions. This makes it possible to find exactly the right type for your application.

Because the RIONOTE supports CCLD (Constant Current Linear Drive), accelerometers with integrated amplifiers can be connected directly. Charge output type accelerometers can be used via the Charge Converter VP-40. Vibration meters and charge amplifiers from Rion support not only acceleration but also velocity and displacement measurements. By connecting the AC output signal to the RIONOTE, analysis of acceleration, velocity, and displacement

becomes possible. The wave recording function allows even more detailed FFT analysis of recorded waveforms, so that not only steady-state vibrations but also fluctuating

vibrations can be analyzed.

Machine Vibration Measurement System

Equipment configurationProduct Model

Multi-function Measuring System (2 channel/4 channel FFT package) SA-A1FTB2/SA-A1FTB4

SD card (512 MB/2 GB/32 GB) MC-51SD1/20SD2/32SP3

Piezoelectric accelerometer (integrated amplifier) PV-91C/97ｴ/57ｴ etc.

Accelerometer cable VP-51 series

BNC adapter VP-52C (Not required for charge output types)

Piezoelectric accelerometer (charge output type) PV-85/87/90B/93 etc.

Charge converter VP-40 (not required for products with integrated amplifier)

Attachment devices such as magnet attachment

Vibration meter VM-82A/83, UV-15/16

RIONOTE Application examples

so tha

RIONOTE

System Diagram

Measurement result examples

Application examples

Multi-channel FFT vibration analysis, real time analysis sample screen

Multi-channel FFT vibration analysis, waveform analysis sample screen

Vibration measurement and FFT analysis for machine equipment

Detailed gear diagnosis

Detailed machine equipment diagnosis

Detailed axis diagnosis

This leaflet is printed with environmentally friendly UV ink.

Distributed by:

ISO 14001 RION CO., LTD.ISO 9 0 0 1 RION CO., LTD.

RION Co., Ltd. is recognized by the JCSS which uses ISO/IEC 17025 (JIS Q 17025) as an accreditation standard and bases its accreditation scheme on ISO/IEC 17011. JCSS is operated by the accreditation body (IA Japan) which is a signatory to the Asia Pacific Laboratory Accreditation Cooperation (APLAC) as well as the International Laboratory Accreditation Cooperation (ILAC). The Quality Assurance Section of RION Co., Ltd. is an international MRA compliant JCSS operator with the accreditation number JCSS 0197.

＊ Windows is a trademark of Microsoft Corporation. ＊ Specifications subject to change without notice.

1512-1　1904.P.D

3-20-41, Higashimotomachi, Kokubunji, Tokyo 185-8533, JapanTel: +81-42-359-7888 Fax: +81-42-359-7442

https://rion-sv.com/