Made in Australia BBEERREENNDDSS

HHyyddrraauulliicc GGrraaddeerr BBllaaddee “The ultimate in grader blades - alter, tilt and

offset from your tractor seat”

Easily adjustable grader blade designed for road maintenance, fire breaks, scrub clearance and general farm work.

MODEL 8’ 2 RAM 8’ 3 RAM 10’ 2 RAM 10’ 3 RAM

Cutting width 2400mm 2400mm 3000mm 3000mm

Offset Manual top link Hydraulic Manual top link Hydraulic

Weight (less wheel) 520kg 520kg 550kg 550kg

* Optional diverters kits (electric or manual) are available to allow 3 ram models to be used on tractors with only 2 pair of remotes.

7 Roxford Avenue, Westbury Tas 7303 Free Call: 1800 335 623

Web: www.delmade.com.au

Optional 14” Holden depth wheel with either

manual ratchet or hydraulic adjustment.

Hydraulic offset (3 ram model) or manual offset (2 ram model)

allows the blade to offset 600mm to the left or right.

Hydraulic tilt in excess of 30° in both directions.

Strong bearing supports make this one of the best wheelkits on the market

Curved 10mm reinforced mouldboard with heavily gusseted corners for

strength where it counts.

Hardened reversible cutting edge.

Blade can be reversed for back blading work

Up to 45° hydraulic angle adjustment both ways. Exclusive patented swivel assembly gives superior strength and

reliability and eliminates pivot pin stress often seen in other brands.

Cat 2 hitch as standard. Other options on request.

BERENDSBERENDS Hydraulic Grader BladeHydraulic Grader Blade

“The ultimate in grader blades - alter, tilt and offset from your tractor seat”

Easily adjustable grader blade designed for road maintenance, fire breaks, scrub clearance and

general farm work.

MODEL 8’ 2 RAM 8’ 3 RAM 10’ 2 RAM 10’ 3 RAM

Weight (less wheel) 555kg 555kg 603kg 603kg

Offset (+/- 600mm) Manual Hydraulic Manual Hydraulic

Cutting width 2400mm 2400mm 3000mm 3000mm

Tilt Hydraulic +/- 30° Hydraulic +/- 30° Hydraulic +/- 30° Hydraulic +/- 30°

Angle Hydraulic +/- 45° Hydraulic +/- 45° Hydraulic +/- 45° Hydraulic +/- 45°

Code 0014 0013 0028 0017

Made in Australia

Up to 45° hydraulic angle adjustment both ways.

Exclusive patented swivel assembly gives superior

strength and reliability and eliminates pivot pin stress often seen in other brands.

Hydraulic offset (3 ram model) or manual offset (2 ram model)

Hydraulic tilt

Optional diverter kits (electric or manual) are available to allow 3

ram models to be used on tractors with one single/dual remotes

Cat 2 hitch as standard. Other linkage and quickhitch

options on request.

Hardened reversible cutting edge.

Blade can be reversed for back blading work

Strong bearing support make this one of the best wheelkits

on the market Curved 10mm reinforced mouldboard with heavily

gusseted corners for strength where it counts.

14” Holden depth wheel makes grading roads an ease. Has 360° rotation.

Available in manual or hydraulic adjustment

Optional bolt on reinforced boxed ends stop the load

from over-spilling. Simple lock down design allows them to be “flipped” over

when not required.

Quality Eaton cylinders used. Tilt - 3” x 10”

Angle/Offset (8’ model) - 3” x 12” Angle/Offset (10’ model) - 3 1/2” x 12”

Patented Turntable - no pivot pin

Due to our policy of continuous improvement, machines may differ from those illustrated. We reserve the right to change design and/or specifications without prior notice or obligation.

7 Roxford Avenue, Westbury Tas 7303 Free Call: 1800 335 623

Web: www.delmade.com.au