Mag Catalog 2003 - Southern Pipe & Supply...Products are shown at a reduced size and are not proportional to each other 5 AUGER BITS SHANK PART UPC NUMBER SIZE SIZE NUMBER 722170-6"

Mag_Catalog 2010-3Final 11/3/10 11:16 AM Page 1

3

C O N T E N T S

DRILLBITSAUGER BITS:

Nailbomber Moly Coated / Ship HeadHeavy Duty (357DLX, 303DLX) . . . . . . . . . . . . . . . . . . . .4Ship Head, Regular Duty (715, 735) . . . . . . . . . . . . . . . .5Single Spur (701) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Single Spur (704, 710) . . . . . . . . . . . . . . . . . . . . . . . . . . .7Combination Long Ship / Spur Bits (727) . . . . . . . . . . . .8Pipe Bits (765) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Electrician’s Power Bits (770) . . . . . . . . . . . . . . . . . . . . . .8Timber Bit™ (728, 730) . . . . . . . . . . . . . . . . . . . . . . . . . .9Auger Bit File (303DLX-FILE) . . . . . . . . . . . . . . . . . . . . . .9

HIGH SPEED STEEL BITS:Cone Drills, Step Drills, HSS (850, 851) . . . . . . . . . . . . .10HSS Step Drills Information . . . . . . . . . . . . . . . . . . . . . .11HSS Step Drill Kits (851) . . . . . . . . . . . . . . . . . . . . . . . .12Silver & Deming Drills, HSS (901) . . . . . . . . . . . . . . . . .13Long Boy Drills, HSS ( 911) . . . . . . . . . . . . . . . . . . . . . .13

SPECIALTY BITS:Countershark & Shark Bits (909) . . . . . . . . . . . . . . . . . .14Countershark Kits (909) . . . . . . . . . . . . . . . . . . . . . . . . .14Self Feed / Saw Tooth Bits (785) . . . . . . . . . . . . . . . . . .15Heavy Duty Hole Maker Kit (757DLX) . . . . . . . . . . . . . .15Carbide Tipped Bell Hanger Drills (781) . . . . . . . . . . . . .16Bell Hanger Drills (786) . . . . . . . . . . . . . . . . . . . . . . . . .17Fish Bit (777) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Extensions (782, 625) . . . . . . . . . . . . . . . . . . . . . . . . . .19Spade Bits (790-16", 792-6") . . . . . . . . . . . . . . . . . . . . .20Diamond Tipped Tile Drills (818) . . . . . . . . . . . . . . . . . .20

HOLE SAWSHOLE SAWS:

Bi-Metal Hole Saws (624) . . . . . . . . . . . . . . . . . . . . . . . .21Hole Saw RPM Chart . . . . . . . . . . . . . . . . . . . . . . . . . . .22Bi-Metal Hole Saw kits (624) . . . . . . . . . . . . . . . . . . . . .23Carbide Tipped Hole Saws (628) . . . . . . . . . . . . . . . . . .24Carbide Grit Hole Saw (625) . . . . . . . . . . . . . . . . . . . . . .25Carbide Grit Hole Saw Kits (625) . . . . . . . . . . . . . . . . . .25Arbors / Pilot Bits (624) . . . . . . . . . . . . . . . . . . . . . . . . .26Arbors / Pilot Bits (625) . . . . . . . . . . . . . . . . . . . . . . . . .26Tungsten Carbide Tipped Hole Cutters (626) . . . . . . . . .27Tungsten Carbide Tipped Hole Cutters Kit (626) . . . . . .27

Te l : 8 8 8 - M A G B I T SF a x : 8 6 6 - B I T G U Y S

(888-624-2487)(866-248-4897)

RECIPROCATING & JIG SAWSRECIPROCATING SAWS:

Bi-Metal Reciprocating Saw Blades (732) . . . . . . . . . . .28"Salvage" Heavy Duty Metal Cutting Demolition Blade (732) . . . .2 9"Razer" Heavy Duty Wood Cutting Demolition Blade (732) . . . . .2 9Heavy Duty Wood Cutting Blade (732) . . . . . . . . . . . . . .30"Rapid" Fast Metal Cutting Blade (732) . . . . . . . . . . . . . .30Scroll Blades (732) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Carbide Grit Reciprocating Blade (732) . . . . . . . . . . . . .31

HAND TOOLSTube Cutter (801) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Spare Rotary Tube Cutter Replacement Wheels (801) . .32Mini Tube Cutter (801) . . . . . . . . . . . . . . . . . . . . . . . . . .32Auto Tube Cutter (801) . . . . . . . . . . . . . . . . . . . . . . . . . .33Tape Measure (111) . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Cutting Fluid, Mag Lube (901) . . . . . . . . . . . . . . . . . . . .33Hack Saw Frame (425) . . . . . . . . . . . . . . . . . . . . . . . . . .34Bi-Metal Hand Hack Saw Blade (425) . . . . . . . . . . . . . . .34Mini Hand Hack Saw Frame (425) . . . . . . . . . . . . . . . . .34Mini Hand Hack Saw Blade (425) . . . . . . . . . . . . . . . . . .34Drywall Saws (600, 700) . . . . . . . . . . . . . . . . . . . . . . . .35Heavy Duty PVC Saw (800) . . . . . . . . . . . . . . . . . . . . . .35Heavy Duty Ratcheting PVC Pipe Cutter (800) . . . . . . . .35

CROSS REFERENCE CHARTSShip Augers Heavy Duty X-Reference Guide (357DLX) . . . .36Ship Augers Heavy Duty X-Reference Guide (303DLX) . . . . .3 6 - 3 7Step Drill X-Reference Guide (850, 851) . . . . . . . . . . . .37Self Feed X-Reference Guide (785) . . . . . . . . . . . . . . . .37Bi-Metal Hole Saw X-Reference Guide (622) . . . . . . . . .38Arbor X-Reference Guide (624, 625) . . . . . . . . . . . . . . .39

General Information . . . . . . . . . . . . . . . . . . . . . . . . .40-42Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43www.magbit.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43


Tel: 888-MAGBITS (888-624-2487) • Fax: 866-BITGUYS (866-248-4897) • Fax: 562-222-2333 • www.magbit.com4

Molybdenum Coated: Molybdenumcools and lubricates the bit. The bitstays sharper longer because theheat treatment lasts longer. The bitejects chips and bores faster thanordinary bits and binds less, even inwet or resinous woods.Deeper Lands: For a stronger lessflexible bit.Countershark: Bits 5/8" and largerin diameter will accept the Mag-Bitcounter bore tools, available in 1-1/2", 2-1/4" and 3-1/4" diameters.Extensions: Quick Change Shank.

The Nailbomber

• Molybdenum coated for coolerrunning

• Cuts nails• Manufactured from higher grade

steel• Glides through wood with less

binding, bores faster• Ejects chips faster• Stays sharper longer• No run out, machined on a true

center

SHANK PART UPC NUMBERSIZE SIZE NUMBER 722170-

8" OAL x 5" Twist Length

UNIT PACK: 1

®

NAILBOMBER bust nails not bits!

Molybdenum Coated: Molybdenumcools and lubricates the bit. The bitstays sharper longer because theheat treatment lasts longer. The bitejects chips and bores faster thanordinary bits and binds less, even inwet or resinous woods. Deeper Lands: For a stronger lessflexible bit.Countershark: Bits 5/8" and largerin diameter will accept the Mag-Bitcounter bore tools, available in 1-1/2", 2-1/4" and 3-1/4" diameters.Extensions: Quick Change Shank.

The Nailbomber

• Molybdenum coated for coolerrunning

• Cuts nails• Manufactured from higher grade

steel• Glides through wood with less

binding, bores faster• Ejects chips faster• Stays sharper longer• No run out, machined on a true

center



UNIT PACK: 1

3/8" 5/16" 303DLX.0616QC 303017/16" 5/16" 303DLX.0716QC 303021/2" 5/16" 303DLX.0816QC 303039/16" 5/16" 303DLX.0916QC 303045/8" 7/16" 303DLX.1016QC 3030511/16" 7/16" 303DLX.1116QC 303063/4" 7/16" 303DLX.1216QC 3030713/16" 7/16" 303DLX.1316QC 303087/8" 7/16" 303DLX.1416QC 3030915/16" 7/16" 303DLX.1516QC 303101" 7/16" 303DLX.1616QC 303111-1/8" 7/16" 303DLX.1816QC 303121-1/4" 7/16" 303DLX.2016QC 303131-3/8" 7/16" 303DLX.2216QC 303141-1/2" 7/16" 303DLX.2416QC 30315

NAILBOMBER bust nails not bits!

AUGER BITS

357DLX HEAV YDUTY SHIP AUGERS

1/2" 5/16" 357DLX.0816QC 357019/16" 5/16" 357DLX.0916QC 357025/8" 7/16" 357DLX.1016QC 3570311/16" 7/16" 357DLX.1116QC 357043/4" 7/16" 357DLX.1216QC 3570513/16" 7/16" 357DLX.1316QC 357067/8" 7/16" 357DLX.1416QC 3570715/16" 7/16" 357DLX.1516QC 357081" 7/16" 357DLX.1616QC 357091-1/8" 7/16" 357DLX.1816QC 357101-1/4" 7/16" 357DLX.2016QC 357111-3/8" 7/16" 357DLX.2216QC 357121-1/2" 7/16" 357DLX.2416QC 35713

®

303DLX HEAV YDUTY SHIP AUGERS

Packaged and bulk programs available


Products are shown at a reduced size and are not proportional to each other 5

AUGER BITS



Versatile high quality fast boringgeneral purpose ship auger bitscome with a self-feed screw pointfor fast, effortless boring.Two recesses in shank to allow forextension set screws (bits over5/8"). Refer to page 19 forappropriate extensions.

• High quality ship auger• Machined on a true center• Round shank with 3 flats• 2 recesses provided for

extensions (MAG 782)• Self-feeding screw point• Packaged / Bulk program

available1/2" 3/8" 715.0816 715019/16" 1/2" 715.0916 715025/8" 1/2" 715.1016 7150311/16" 1/2" 715.1116 715043/4" 1/2" 715.1216 7150513/16" 1/2" 715.1316 715067/8" 1/2" 715.1416 7150715/16" 1/2" 715.1516 715081" 1/2" 715.1616 715091-1/8" 1/2" 715.1816 715101-1/4" 1/2" 715.2016 715111-3/8" 1/2" 715.2216 715121-1/2" 1/2" 715.2416 71513



UNIT PACK: 1

Versatile high quality fast boringgeneral purpose ship auger bitscome with a self-feed screw pointfor fast, effortless boring.Two recesses in shank to allow forextension set screws (bits over5/8"). Refer to page 19 forappropriate extensions.

• High quality ship auger• Machined on a true center• Hex shank• 2 Recesses provided for

extensions (MAG 782)• Self-feeding screw point• Packaged / Bulk program

available1/4" 1/4"Hex 735.0416 735175/16" 5/16"Hex 735.0516 735183/8" 3/8" 735.0616 735017/16" 3/8" 735.0716 735021/2" 3/8" 735.0816 735039/16" 7/16" 735.0916 735045/8" 7/16" 735.1016 7350511/16" 7/16" 735.1116 735063/4" 7/16" 735.1216 7350713/16" 7/16" 735.1316 735087/8" 7/16" 735.1416 7350915/16" 7/16" 735.1516 735101" 7/16" 735.1616 735111-1/16" 7/16" 735.1716 735121-1/8" 7/16" 735.1816 735131-1/4" 7/16" 735.2016 735141-3/8" 7/16" 735.2216 735151-1/2" 7/16" 735.2416 73516

UNIT PACK: 1

715 REGULAR DUTY SHIP AUGERS

735 REGULAR DUTY SHIP AUGERS



1/4" 1/4" 701.0416 701015/16" 5/16" 701.0516 701023/8" 3/8" 701.0616 701037/16" 3/8" 701.0716 701041/2" 3/8" 701.0816 701059/16" 3/8" 701.0916 701065/8" 3/8" 701.1016 7010711/16" 3/8" 701.1116 701083/4" 3/8" 701.1216 7010913/16" 3/8" 701.1316 701107/8" 3/8" 701.1416 7011115/16" 3/8" 701.1516 701121" 3/8" 701.1616 701131-1/16" 7/16" 701.1716 701181-1/8" 7/16" 701.1816 701141-1/4" 7/16" 701.2016 701151-3/8" 7/16" 701.2216 701161-1/2" 7/16" 701.2416 70117

UNIT PACK: 1


7-7/8" OAL x 5" Twist Length Single spur opposite cutting lip forclean entrance and exit holes and aself-feed screw point for fast,effortless boring. Two recesses in shank to allow forextension set screws (5/8" andlarger sizes). Refer to page 19 forappropriate extensions.

• Black oxide flutes• Self-feeding screw

point• Spur for clean boring• Packed in a reusable storage

tube

MAG701 SINGLE SPUR AUGER KIT

1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" 701.7000 70118

KIT PART UPC #PIECES NUMBER 722170-

AUGER BITS

701 SINGLE SPUR AUGER BIT



AUGER BITS


UNIT PACK: 1

18" OAL x 12" Twist LengthSingle spur opposite cutting lip forclean entrance and exit holes and aself-feed screw point for fast,effortless boring. Two recesses in shank to allow for extension set screws(5/8" and larger sizes). Refer topage 19 for appropriate extensions.

3/8" 5/16" 710.0616 710017/16" 5/16" 710.0716 710021/2" 5/16" 710.0816 710039/16" 7/16" 710.0916 710045/8" 7/16" 710.1016 7100511/16" 7/16" 710.1116 710063/4" 7/16" 710.1216 7100713/16" 7/16" 710.1316 710087/8" 7/16" 710.1416 7100915/16" 7/16" 710.1516 710101" 7/16" 710.1616 710111-1/16" 7/16" 710.1716 710161-1/8" 7/16" 710.1816 710121-3/16" 7/16" 710.1916 710171-1/4" 7/16" 710.2016 710131-5/16" 7/16" 710.2116 710181-3/8" 7/16" 710.2216 710141-1/2" 7/16" 710.2416 71015

Use when a 6" bit is too short forthe hole and a 18" bit is too long.Single spur opposite cutting lip forclean entrance and exit holes and aself-feed screw point for fast,effortless boring.Two recesses in shank to allow forextension set screws. Refer to page19 for appropriate extensions.

•Only available from MAG-BIT•Black oxide flutes•Self-feeding screw point•Spur for clean boring•Packed in a reusable

storage tube13" OAL x 9-1/2" Twist Length

UNIT PACK: 1

SHANK PART UPC NUMBERSIZE SIZE NUMBER 722170-5/16" 5/16" 704.0516 704133/8" 5/16" 704.0616 704147/16" 5/16" 704.0716 704151/2" 7/16" 704.0816 704169/16" 7/16" 704.0916 704175/8" 7/16" 704.1016 7041811/16" 7/16" 704.1116 704013/4" 7/16" 704.1216 7040213/16" 7/16" 704.1316 704037/8" 7/16" 704.1416 7040415/16" 7/16" 704.1516 704051" 7/16" 704.1616 704061-1/16" 7/16” 704.1716 704101-1/8" 7/16" 704.1816 704071-3/16" 7/16" 704.1916 704111-1/4" 7/16" 704.2016 704081-5/16" 7/16" 704.2116 704121-1/2" 7/16" 704.2416 70409



•Black oxide flutes•Self-feeding screw point•Spur for clean boring•Packed in a reusable

storage tube




UNIT PACK: 1


Spur provided along with a self-feed screw point for fast, clean andeffortless boring. Extra long reachbit for heavy wood, railroad ties orcreosoted poles.Two recesses in shank allow forextension set screws (bits over5/8"). Refer to page 19 forappropriate extensions.

• Spur for clean boring• Ship head style twin

cutting edges• 7/16" hex shank• Self-feeding screw point


UNIT PACK: 1

6-1/2" OAL x 4" Twist Length

Built short to fit easily betweenstuds. Self-feeding screw point.Two cutting edges and twin spursfor super clean holes. Double flutesfor fast chip extraction.Two recesses in shank to allow forextension set screws (bits over5/8"). Refer to page 19 forappropriate extensions.

• 7/16" hex shank• Traditional 2 flute design• 2 spurs for boring clean holes• Self-feeding screw point• Packed in a reusable storage

tube3/4" 7/16" 765.1216 765017/8" 7/16" 765.1416 765021" 7/16" 765.1616 765031-1/8" 7/16" 765.1816 765041-1/4" 7/16" 765.2016 765051-3/8" 7/16" 765.2216 765061-1/2" 7/16" 765.2416 76507


8-1/2" OAL x 5-1/2" Twist Length

Designed to cut through three2"x4"s between other studs with aright angle drill. Traditional doubletwist for fast clearance of chips and two cutting edges. Single spur forclean cut holes. A self feed screwpoint for fast, effortless boring.Two recesses in shank allow forextension set screws (bits over5/8"). Refer to page 19 forappropriate extensions.

• For electrician’s, pipe fitters and plumbers.

• Black oxide, double flute construction

• Self-feeding screw point with Spur for clean boring

• Packed in a reusable storage tube5/8" 5/16" 770.1016 77001

11/16" 5/16" 770.1116 770023/4" 5/16" 770.1216 7700313/16" 5/16" 770.1316 770047/8" 5/16" 770.1416 770051" 5/16" 770.1616 770061-1/8" 7/16" 770.1816 770071-1/4" 7/16" 770.2016 77008

UNIT PACK: 1

AUGER BITS

727 LONG AUGER BITS

765 PIPE BITS

770 ELECTRICIAN'S POWER BITS

9/16" 7/16" 727.0916 727015/8" 7/16" 727.1016 7270211/16" 7/16" 727.1116 727033/4" 7/16" 727.1216 7270413/16" 7/16" 727.1316 727057/8" 7/16" 727.1416 7270615/16" 7/16" 727.1516 727071" 7/16" 727.1616 72708



UNIT PACK: 1

SHANK PART UPC NUMBERSIZE SIZE NUMBER 722170-9/16" 1/2" 728.0916 728015/8" 1/2" 728.1016 7280211/16" 1/2" 728.1116 728033/4" 1/2" 728.1216 7280413/16" 1/2" 728.1316 728097/8" 1/2" 728.1416 7281015/16" 1/2" 728.1516 728111" 1/2" 728.1616 728121-1/16" 1/2" 728.1716 728131-1/8" 1/2" 728.1816 72814

4 0 "

PART UPC #OAL NUMBER 722170

7 " 3 0 3 D L X . F I L E 3 0 3 1 8

• Bits accept Mag-BitCountershark, counter boretools.

• 40" overall length with a 36"flute or 30" overall length with a26" long flute.

• Double flute and double spurdesign for clean holes and quickchip removal.

• Back-tapered to prevent bindingin deep holes.

• Machined on a true center forless run-out and to prevent"wandering" in the workpiece.

• MAG730 has Quick Change 7/16"hex shank to work withpneumatic and hydraulic drill motors.

Applications: Log Homes, Trees(arborists), Landscape Contractors(railroad ties), Dock Builders,B u l k h e a d s , Remodeling/Renovation,Wood Play-set Manufacturers, Postand Beam Construction, anyonewho needs a deep hole or a longreach.

3 0 "

• Specially designed to sharpen your valuable auger bits for longer cutting life.

• One end single cut with safe edges (uncut)

• One end safe (uncut) with singlecut edges.

40" OAL, 36" Flute. 1/2" Shank w/ 3 Flats

SHANK PART UPC NUMBERSIZE SIZE NUMBER 722170-9/16" 7/16" Q.C. 730.0916 730015/8" 7/16" Q.C. 730.1016 7300211/16" 7/16" Q.C. 730.1116 730033/4" 7/16" Q.C. 730.1216 7300413/16" 7/16" Q.C. 730.1316 730057/8" 7/16" Q.C. 730.1416 7300615/16" 7/16" Q.C. 730.1516 730071" 7/16" Q.C. 730.1616 730081-1/16" 7/16" Q.C. 730.1716 730091-1/8" 7/16" Q.C. 730.1816 730101-1/2" 7/16" Q.C. 730.2416 73013

30" OAL, 26" Flute. 7/16" Hex Q.C. Shank

Safe Edge Single Cut Edge

UNIT PACK: 1

728 & 730 TIMBER BITS

AUGER BITS

303DLX FILE



UNIT PACK: 1

Part No. 851-0500A & 851-0500B have Q.C. Hex Shank. All other Shanks w/3 Flats

Step drills

• Two flutes for cleaner cut• Split point prevents walking• Self centering

High speed steel drills for m u l t i p l e -size, perfectly round, burr- f re eholes in thin materials. No pilothole required. For use in sheetsteel, non-ferrous metal, pvc,plastic laminates such as Formicaand even plywood.

7/8" hole for 1/2" conduit,1-1/8" hole for 3/4" conduit,1-3/8" hole for 1" conduit,1-7/32" hole for oil-tight switches.

When drilling metals, use a cutting compoundsuch as MAG-LUBE concentrated cutting fluid.

Drills pilot holes for the 3 mostpopular sizes of knock out punchdrive screws: 3/8", 7/16" and 3/4".

Drills holes for 1/2" and3/4" conduit KO.

Two flutes forcleaner cut. Split point prevents walking.

851.1500 & 851.0500A

Together, these two bits cover allusual holes from 1/8" through 1-1/2".

3 flute design.

851.0750B 851.1125B 851.1375B*

*

NO. OFS M A L L E S T L A R G E S T SHANK PART UPC NUMBERS T E P S DIA. DIA. NUMBER 722170-

13 1/8" 1/2" 1/4" 851.0500A 85101All Steps: 1 / 8 " - 5 / 3 2 " - 3 / 1 6 " - 7 / 3 2 " - 1 / 4 " - 9 / 3 2 " - 5 / 1 6 " - 1 1 / 3 2 " - 3 / 8 " - 1 3 / 3 2 " - 7 / 1 6 " - 1 5 / 3 2 " - 1 / 2 "

6 3/16" 1/2" 1/4" 851.0500B 85102All Steps: 3 / 1 6 " - 1 / 4 " - 5 / 1 6 " - 3 / 8 " - 7 / 1 6 " - 1 / 2 "

9 1/4" 3/4" 3/8" 851.0750 85103All Steps: 1 / 4 " - 5 / 1 6 " - 3 / 8 " - 7 / 1 6 " - 1 / 2 " - 9 / 1 6 " - 5 / 8 " - 1 1 / 1 6 " - 3 / 4 "

3 3/8" 3/4" 3/8" 851.0750B 85107All Steps: Pilot holes for K.O.punch dri ve screws 3/8"-7/16"-3/4"

12 3/16" 7/8" 3/8" 851.0875 85104All Steps: 3 / 1 6 " - 1 / 4 " - 5 / 1 6 " - 3 / 8 " - 7 / 1 6 " - 1 / 2 " - 9 / 1 6 " - 5 / 8 " - 1 1 / 1 6 " - 3 / 4 " - 1 3 / 1 6 " - 7 / 8 "

8 7/8" 1-3/8" 3/8" 851.1000 85111All Steps: 9/16"-5/8"-11/16"-3/4 "-13/16"-7/8"-15/16"-1"

12 7/16" 1-1/8" 3/8" 851.1125 85105All Steps: 7 / 1 6 " - 1 / 2 " - 9 / 1 6 " - 5 / 8 " - 1 1 / 1 6 " - 3 / 4 " - 1 3 / 1 6 " - 7 / 8 " - 1 5 / 1 6 " - 1 " - 1 . 1 / 1 6 " - 1 . 1 / 8 "

2 7/8" 1-1/8" 3/8" 851.1125B 85108All Steps: 7 / 8 " - 1 . 1 / 8 "

11 3/4" 1-3/8" 3/8" 851.1375 85106All Steps: 3 / 4 " - 1 3 / 1 6 " - 7 / 8 " - 1 5 / 1 6 " - 1 " - 1 . 1 / 1 6 " - 1 . 1 / 8 " - 1 . 1 3 / 1 6 " - 1 . 1 / 4 " - 1 . 5 / 1 6 " - 1 . 3 / 8 "

5 7/8" 1-3/8" 3/8" 851.1375B 85109All Steps: 7/8" for 1/2" conduit - 1.1/8" for 3/4" conduit - 1.7/32" for oil tight switch -1.1/4"-1.3/8" for 1" conduit

10 13/16" 1-3/8" 3/8" 851.1375R 85112Self centering Step Reamer requires 13/16"min.pilot hole.All Steps: 13/16"-7/8"- 1 5 / 1 6 " - 1 " - 1 . 1 / 1 6 " - 1 . 1 / 8 " - 1 . 1 3 / 1 6 " - 1 . 1 / 4 " - 1 . 5 / 1 6 " - 1 . 3 / 8 "

11 1/4" 1-1/2" 3/8" 851.1500 85110All Steps: 1 / 4 " - 3 / 8 " - 1 / 2 " - 5 / 8 " - 3 / 4 " - 7 / 8 " - 1 . 1 / 8 " - 1 . 1 / 4 " - 1 . 3 / 8 " - 1 . 1 / 2"

HIGH SPEED STEEL BITS

851 HSS STEP DRILLS

1 1/2" 1/4" 850.0500 850011 7/8" 3/8" 850.0875 85002

NO. OF SHANK PART UPC NUMBERSTEPS. DIA. NUMBER 722170-

Cone drillsHigh speed steel for use in thinmaterials. No pilot hole required forburr free, perfectly round holes insheet steel, non-ferrous metal, pvc,plastic laminates such as Formicaand even plywood. UNIT PACK: 1

• Two flutes for cleaner cut• Split point prevents walking• Self centering

850 HSS CONE DRILLS



MAG-BIT offers a wider selection of step drills than any other manufacture r.

Step Drills – Features, benefits and uses:

Applications: Electrical, Plumbing, Construction, HVAC, Control Panels, Sheet Metal Work, Auto Body Repair,Shopfitting Installations.

Materials: Burr free holes in Sheet Metal, Stainless Steel, Non-Ferrous Metals, Cast Iron, Plastics, Fo rmica, Plywo o d .Benefits: Perfectly round holes, Self-centering. No pilot hole required (except Reamers). Special point prevents

"walking". Two flutes and two cutting blades for chatter free cutting. Automatic de-burring. Stronger, more rigid than standard drills. Multiple holes from one bit. Three lobed shank will not slip in any chuck.Steam oxide finish for long life.

Drilling Depth: The maximum material thickness is determined by the length of the step. If the workpiece can be reversed, multiply the depth by 2.

Part No. No. Holes Min./Max Diameter Shank Application

Step Drills

851.0500A 13 1/8" - 1/2" 1/4" Together these two bits cover all usual 851.1500 11 1/4" - 1-1/2" 1/2" holes from 1/8" through 1-1/2"851.1000 5 9/16" - 1" 3/8" All drilling applications851.0750 9 1/4" - 3/4" 3/8" All drilling applications851.1125 12 7/16" - 1-1/8" 3/8" All drilling applications851.1375 11 3/4" - 1-3/8" 1/2" All drilling applications851.0875 12 3/16" - 7/8" 3/8" All drilling applications851.0500B 6 3/16" - 1/2" 1/4" All drilling applications

>

Part No. No. Holes Min./Max Diameter Shank Application

Reamer

851.1375R 10 3/16" - 1-3/8" 1/2" Reamer. Self centering. Requires 13/16" starter hole.

Part No. No. Holes Specified Diameters Shank Application

Specialty Drills: All specialty drills have extra step length at specified diameters for easy identification.

When drilling metals use a cutting compound such as MAG-LUBE concentrated cutting fluid.

851.1125B 2 7/8" - 1-1/8" 3/8" 7/8" hole for 1/2" conduit, 1-1/8" for 3/4" conduit.

851.1375B 5 7/8" - 1-1/8" - 1-7/32" 3/8" 7 / 8" hole for 1/2" conduit, 1-1/8" hole for 3/4" conduit, 1-3/8"1-1/4" - 1-3/8" hole for 1" conduit, 1-7/32" hole for oil-tight switches

851.0750B 3 3/8" - 7/16" - 3/4" 3/8" 3 standard holes to accommodate dri ve screws for Knock - O u tpunches


Part No. No. Holes Diameter Shank Application

Cone Drills

850.0500 1 1/2" 1/4" 1/2" hole for Knock-Out punches

850.0875 1 7/8" 3/8" 7/8" hole for Knock-Out punches



Step Drill Kits

851 Kit 1 Electrician’s Step Drill Kit 1 85116851.1375B / 851.0050A / 851.1000851 Kit 2 Electrician’s Step Drill Kit 2 85114851.0750B / 851.1375B851 Kit 3 General Purpose Step Drill Kit 1 85115851.0500A / 851.0875851 Kit 4 General Purpose Step Drill Kit 2 85117851.0050A / 851.1500 Covers all usual hole sizes from 1/8" through 1-1/2"

851 Kit 1 851 Kit 2

851 Kit 3 851 Kit 4

PART UPC NUMBERNUMBER 722170-




SHANK PART UPC NUMBERSIZE SIZE NUMBER 722170-9/16" 1/2" 901.0916 901025/8" 1/2" 901.1016 9010411/16" 1/2" 901.1116 901063/4" 1/2" 901.1216 9010813/16" 1/2" 901.1316 901107/8" 1/2" 901.1416 9011215/16" 1/2" 901.1516 901141" 1/2" 901.1616 901161-1/16" 1/2" 901.1716 901171-1/8" 1/2" 901.1816 901181-3/16" 1/2" 901.1916 901191-1/4" 1/2" 901.2016 90120

5-5/8" OAL x 4" Twist Length

• 118˚ Split Point, Prevents Walking

• 1/2" Shank with 3 flats• High Speed Steel• Specially designed flutes for

better chip ejection• Packed in a reusable storage

tubeUseful in applications where theMag-Bit Long Boy is too long.

7/16" 1/2" w/ 3 flats 911.0716 911001/2" 1/2" w/ 3 flats 911.0816 911019/16" 1/2" w/ 3 flats 911.0916 911025/8" 1/2" w/ 3 flats 911.1016 9110311/16" 1/2" w/ 3 flats 911.1116 911043/4" 1/2" w/ 3 flats 911.1216 9110513/16" 1/2" w/ 3 flats 911.1316 911067/8" 1/2" w/ 3 flats 911.1416 9110715/16" 1/2" w/ 3 flats 911.1516 911081" 1/2" w/ 3 flats 911.1616 911091-1/16" 1/2" w/ 3 flats 911.1716 911101-1/8" 1/2" w/ 3 flats 911.1816 911111-1/4" 1/2" w/ 3 flats 911.2016 91112


UNIT PACK: 1


• High speed steel• 1/2" shank with 3 flats• 118˚ point• Packed in a reusable storage

tube• Bulk program availableDesigned to give the roofing andframing contractor more holes perbit using pre-drilled joist hangers,anchors, caps and connectors. Drillbeams-don't bend bits.

UNIT PACK: 1


901 SILVER & DEMING DRILLS

911 LONG BOYDRILL BITS



909.Kit1 909.1116 11/16" 90921909.3616 2-1/4

1-1/2" 909.2416 909102-1/4" 909.3616 909113-1/4" 909.5216 90912

PART UPC NUMBERSIZE NUMBER 722170-

PART UPC NUMBERSIZE NUMBER 722170-

UNIT PACK: 1

• Counter-bore for use in all types of wood.

• Use with Mag-Bit Shark bit orMAG303DLX, 357DLX, 735, 715and 710 auger bits 5/8" diameteror larger to drill clearance holesfor bolts and countersink thehead and washer in one action.

• Securely attaches to bit with a heavy duty set screw.

• Six super sharp teeth on the outer diameter cut a clean hole and leave a smooth finish at thebottom of the workpiece.

• Packaged in a clear plasticclamshell

• Shark-Bits available in 9/16", 11/16" and 13/16" diameters.

• Makes more holes in Glue Lam Joists and other engineered wood products than auger bits.

• High Speed Steel will drill through steel (use Mag-Lube cutting fluid).

• Packed in a reusable storage tube

Designed to work with MAG-BIT’sCountershark c o u n t e r- b o re tool,these 9" b i t s have a flat on one sideof the shaft to accommodate theset screw on the Countershark.

UNIT PACK: 1

9/16" 909.0916 9090211/16" 909.1116 9090313/16" 909.1316 90904


MAG 909 KIT1 2 piece kit Packaged in a clear plastic clamshell


KIT KIT PART UPC NUMBERNUMBER PARTS SIZE 722170-

909.Kit2 909.0916 9/16" 90922909.1116 11/16"909.1316 13/16"909.3616 2-1/4"



909.Kit3 909.2416 1-1/2" 90923909.3616 2-1/4"909.5216 3-1/4"


MAG-BIT SPECIALTY BITS

909 SHARK-BITS

909 COUNTERSHARK

909 KITS



Heavy Duty Hole Maker KitMAG 757DLX-9000

BITS PART UPC NUMBERINCLUDED NUMBER SIZE 722170

Kit Includes: • 4 Nailbomber Moly Coated Bits• 3 Self Feed Moly Coated Bits• 1 Step Drill• 1 Extension• Hex Keys• Replacement Screw Points

Auger Bits 357DLX.1416 7/8" 75701357DLX.1816 1-1/8"357DLX.2016 1-1/4"357DLX.2416 1-1/2"

Self Feed Bits 785.2816 1-3/4"785.3416 2-1/8"785.4116 2-9/16"

Extension 782.95.0716 7/16" x 9-1/2"Step Drill 851.0875 7/8"

3/16" Rnd 1" to 1-1/2" Single end Screw pt. 785A.0316 78508

1/4" Rnd 1-3/4" to 3" Single end Screw pt. 785B.0416 78509

3/8" Rnd 3-5/8" & 4-5/8" Single end Screw pt. 785C.0616 78510

UNIT PACK: 1

TYPE OF PA RT UPC NO.SIZE FITS POINT N U M B E R 7 2 2 1 7 0 -

Pilot Drill Replacement

• Molybdenum coated forcooler running which causes bit to last longer

• Glides through woods with less binding

• Quick Change 7/16" hex shank.(Except 3-5/8" & 4-5/8")

• Packaged in box with hang tag.• Wide throat ejects chips more

effectively.Designed for high speed cutting oflarge holes for pipe or conduitplacement. The wide throat allowsfast chip removal with no clogging. The Quick Change shank has tworecesses to allow for a tight fitwhen using Mag-Bit extensions.

SHANK PART UPC NUMBERSIZE SIZE NUMBER 722170-1" 7/16" QC 785.1616 785171-1/8" 7/16" QC 785.1816 785181-1/4" 7/16" QC 785.2016 785191-3/8" 7/16" QC 785.2216 785201-1/2" 7/16" QC 785.2416 785211-3/4" 7/16" QC 785.2816 785222" 7/16" QC 785.3216 785232-1/8" 7/16" QC 785.3416 785242-1/4" 7/16" QC 785.3616 785252-9/16" 7/16" QC 785.4116 785263" 7/16" QC 785.4816 785273-5/8" 7/16" 785.5816 785284-5/8" 7/16" 785.7416 78529

6" OAL

ENTRANCE FOR ENTRANCEDIAMETER PIPE & CONDUIT FOR TUBING1" 1/2" 7/8"1-1/8" 1/2" 1"1-1/4" 3/4" 1-1/8"1-3/8" 1" 1-1/4"1-1/2" 1-3/8"1-3/4" 1-1/4" 1-1/2"2" 1-1/2" 1-7/8"2-1/8" 2"2-1/4" 2-1/8"2-9/16" 2" 2-1/2"3" 2-1/2" 2-7/8"3-5/8" 3" 3-1/2"4-5/8" 4" 4-1/2"


785 SAW TOOTH/SELF-FEED BITS

757DLX HEAVY DUTY HOLE MAKER KIT



• High carbide tipped steel• Fish eye hole for

pulling wire• Packaged / Bulk program

availableCarbide tipped masonry drills.Drills for boring masonry fishingwires. Fish eye hole provided neartip of flutes to aid pulling wire aftercompletion of drilling.


3/16" x 4" 3/16" 4.60mm 781.04.0316 781501/4" x 4" 1/4" 5.94mm 781.04.0416 781515/16" x 4" 5/16" 7.28mm 781.04.0516 781523/8" x 4" 3/8" 8.78mm 781.04.0616 781537/16" x 4" 3/8" 9.52mm 781.04.0716 781541/2" x 4" 7/16" 10.79mm 781.04.0816 78155

SHANK SHANK PART UPC NUMBERSIZE SIZE SIZE NUMBER 722170-

Available in 12", 18" and 24" overall length

1/4" x 6" 1/4" 5.94mm 781.06.0416 781563/8" x 6" 3/8" 8.78mm 781.06.0616 781571/2" x 6" 7/16" 10.79mm 781.06.0816 781585/8" x 6" 1/2" 12.50mm 781.06.1016 781593/4" x 6" 1/2" 12.50mm 781.06.1216 781607/8" x 6" 1/2" 12.50mm 781.06.1416 781611" x 6" 1/2" 12.50mm 781.06.1616 78162

1/4" x 18" 1/4" 5.94mm 781.18.0416 781255/16" x18" 5/16" 7.28mm 781.18.0516 781263/8" x 18" 3/8" 8.78mm 781.18.0616 781271/2" x 18" 7/16" 10.79mm 781.18.0816 781295/8" x 18" 1/2" 12.50mm 781.18.1016 781313/4" x 18" 1/2" 12.50mm 781.18.1216 781327/8" x 18" 1/2" 12.50mm 781.18.1416 781331" x 18" 1/2" 12.50mm 781.18.1616 78134

781 CARBIDE TIPPEDBELL HANGER DRILLS

1/4" x 24" 1/4" 5.94mm 781.24.0416 781395/16" x 24 5/16" 7.28mm 781.24.0516 781643/8" x 24" 3/8" 8.78mm 781.24.0616 781411/2" x 24" 7/16" 10.79mm 781.24.0816 781425/8" x 24" 1/2" 12.50mm 781.24.1016 781433/4" x 24" 1/2" 12.50mm 781.24.1216 78144

1/4" x 12" 1/4" 5.94mm 781.12.0416 781115/16" x 12" 5/16" 7.28mm 781.12.0516 781633/8" x 12" 3/8" 8.78mm 781.12.0616 781131/2" x 12" 7/16" 10.79mm 781.12.0816 781155/8" x 12" 1/2" 12.50mm 781.12.1016 781173/4" x 12" 1/2" 12.50mm 781.12.1216 78118



7/16" x 12" 7/16" rnd. 786.12.0716 786151/2" x 12" 3/8" rnd. 786.12.0816 786169/16" x 12" 3/8" rnd. 786.12.0916 786175/8" x 12" 1/2" w/3 fits. 786.12.1016 7861811/16" x 12" 1/2" w/3 fits. 786.12.1116 786193/4" x 12" 1/2" w/3 fits. 786.12.1216 78620


Available in 12", 18", 24", & 30" overall length

• High carbon steel• Fish eye hole for

pulling wire• Packaged / Bulk program

available82 Deg Point Premium HighCarbon Steel Bell Hanger Bit.High carbon steel drills for boringwood and fishing wires. Fish eyehole provided near tip of flutes toaid pulling wire after completion ofdrilling.Two recesses in shank to allow forextension set screws (bits 5/8" andover). Refer to page 19 forappropriate extensions.

1/4" x 24" 1/8" rnd. 786.24.0416 786095/16" x 24" 5/16" rnd. 786.24.0516 786103/8" x 24" 3/8" rnd. 786.24.0616 786111/2" x 24" 3/8" rnd. 786.24.0816 78612

3/16" x 18" 3/16" rnd. 786.18.0316 786041/4" x 18" 1/4" rnd. 786.18.0416 786055/16" x 18" 5/16" rnd. 786.18.0516 786063/8" x 18" 3/8" rnd. 786.18.0616 786077/16" x 18" 3/8" rnd. 786.18.0716 786211/2" x 18" 3/8" rnd. 786.18.0816 786089/16" x 18" 3/8" rnd. 786.18.0916 786225/8" x 18" 1/2" w/3 fits. 786.18.1016 7862311/16" x 18" 1/2" w/3 fits. 786.18.1116 786243/4" x 18" 1/2" w/3 fits. 786.18.1216 7862513/16" x 18" 1/2" w/3 fits. 786.18.1316 786267/8" x 18" 1/2" w/3 fits. 786.18.1416 7862715/16" x 18" 1/2" w/3 fits. 786.18.1516 786281" x 18" 1/2" w/3 fits. 786.18.1616 78629

1/4" x 30" 1/4" rnd. 786.30.0416 786133/8" x 30" 3/8" rnd. 786.30.0616 78614


786 BELL HANGERD R I L L S


18


UNIT PACK: 1

Unique flexible self-feeding bits up to 72" long

Documents

Mag Catalog 2003 - Southern Pipe & Supply...Products are shown at a reduced size and are not proportional to each other 5 AUGER BITS SHANK PART UPC NUMBER SIZE SIZE NUMBER 722170-6"