Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
STATE-OF-THE ARTMAGNET & POWDER METAL MANUFACTURER
MAGNEQUENCH INTERNATIONAL, INC.ASSETS NO LONGER REQUIRED IN THE CONTINUING OPERATIONS OF:
biditup!An Industrial Assets, Inc. Company
11426 Ventura Blvd., 2nd FloorStudio City, CA 91604
P: 818.508-7034F: 818-508-3025
www.biditup.comemail: [email protected]
INSPECTION: WEDNESDAY, SEPTEMBER 11TH,9 AM-4 PM & MORNING OF SALE
MAGNEQUENCHINTERNATIONAL, INC.
6435 SCATTERFIELD RD.ANDERSON, IN
THINKING OF HAVINGAN AUCTION?
NEED AN APPRAISAL?KNOW OF A PLANT
CLOSURE?
(818) 508-7034 EXT. 12
CALL:
9:30 AM
THURSDAYSEPTEMBER 12TH
9:30 AM
THURSDAYSEPTEMBER 12TH
3,000 Lb. CONSARC Vacuum Induction Melting Furnace, Complete w/BEST Dump Hopper & Batching System, DualHopper Alloying System, 500 KW power Supply, (4) Stokes, (412) Vacuum Pumps, (4) #615 Blowers, 1,000 Lb. Vacuum InterlockCharging System on Top, Hydraulic Mold Car w/Isolated Mold Tooling Tunnel, 10-T P & H Pick & Place Transfer Unit, OfflineRebuild & Sintering Station w/300KW AJAX Power Supply, Spare Coils & Parts.
1984 1650˚C VFS 9 VACUUM FURNACE SYSTEMS, Mdl. #HL26RE Vacuum Furnace, 18” x 14” x 27” Work Zone, #VF109Atmosphere Vacuum - 750 Lb. Weight capacity, 103 KVA, 480 Volt, w/Stoke #149 Vacuum Pump w/#615 Blower, Water Cooled, s/n VF 109.
VACUUM MELTING SYSTEMS
2
Overall View of CONSARC Vacuum Melting System
Dual Hopper Alloying System
BEST Dump Hopper
STOKES Vacuum Pump,Mdl. 412
VISIT: www.biditup.com FOR UPCOMING AUCTION INFORMATION
4 Available
Spare Coils
View of Furnace Molds
3
Hydraulic Mold Car & 10-T P&H Pick & Place Transfer Unit
Offline Rebuild & Sintering Station w/300KW Power Supply
1650˚C VS 9, Mdl. #HL26RE Vacuum Furnace
Mold Tooling Tunnel
Vacuum Interlock Charging System
1984
CM INC. High Temperature Tube Annealing Furnace
2000
4
(5) CINCINNATI Powder Compacting Presses, Mdl. #220-DC-6, 8” Ram Stroke, 5” Ram Adjustment, 6” FillDepth, 0-3” Die Float Stops, 10-30 SPM, 3-Platen Capability, Top Punch Hold Down, Core Rod, Manipulator, LargeQuantity of Misc. Parts & Tooling, s/n’s 43041, 43044, 40583, 44456 & 435631990 30-T KUX Powder Metal Press, Mdl. #60B , 30-T Max. Force, s/n 60B454145.
POWDER METAL PRESSES
View of 5 CINCINNATI Powder Compacting Presses, Mdl. #220-DC-6
View of CINCINNATI Powder CompactingPress, Mdl. #220-DC-6 w/Controls
30-Ton KUX Powder Metal Press, Mdl. 60B
1990
Spare Die Sets for CINCINNATI PowderCompacting Presses
50-T WABASH Up-Moving Hydraulic Sample Press, Mdl. #V50-15-X, Approx. 24” x 18” Up-Moving Platen, s/n 9273.HYDRAULIC PRESS
50-T WABASH Up-Moving Hydraulic Sample Press, Mdl. #V50-15-X
1 of 5
STATEOF THEART
BLENDING & MIXING
5
2000 CM Inc. High Temperature Tube Annealing Furnace,Electric, HONEYWELL Controls, 21 KVA, 1150˚C/2250˚F Max. Temperature,Hydrogen, Nitrogen & Argon Atmosphere, Protective Atmosphere-Nitrogen& Argon, (3) Zones, s/n 9800769 • $67,000.00 Replacement Cost.700˚C LINDBERG High Temperature Furnace, 10” x 10” x 16” I.D.,240 Volt, s/n 848121.1997 CIRE TECHNOLOGIES Thermal Oxidizer, 1500˚ Max.Operating Temp, 4050 SCFM, Natural gas, (2) MAXEN Non-Premix Series GNozzle Burners, 18 Lbs. Per Hour VOC Load.1,300˚F BLUE M Furnace, Mdl. CW9980G, 40V, 60 Cycle, 3-Phase,SOLID STATE Controls, 48”x36”x24”.
DELPHI PATTERSON Powder Mixing, Blending, Crushing & Pack Out System,DELPHI Crushers, Auger Type Annealing,Electric Annealer, 3,000 Lb. DoubleCONE/PATTERSON Blender.5,000 Lb. PAUL ABBEY Double ConeBlender, Variable Speed Drive, Stainless SteelConstruction Argon Atmosphere, Fire Retardant,Automatic Bottom Discharge.CAMCO Dial Type Fixture w/Hopper/Loader.Dual Hopper Mixing Bins w/Transfer Car.
HEAT TREAT FURNACES
CIRE TECHNOLOGIES Thermal Oxidizer View of Assorted BLUE M Ovens
DELPHI PATTERSON Powder Mixing, Blending, Crushing & Pack Out System
1997
5,000 Lb. PAUL ABBEY Double Cone Blender
CAMCO Dial Type Fixture
6
650˚F GRIEVE Tunnel Oven, 24”Wide Mesh Belt, 106 KW, 460 Volt,Electric, (2) Heat Zones, Cooling Zone,45’ Approx. Overall Length, Air Dry Off,Discharge, s/n 650022.(2) 600˚F BLUE M, Mdl. #MP366SRIG,36”x 36”x48’ High, 200KW, BLUE MChart Recorder, SOLID STATE Controls,Digital Readout, s/n’s 44X5716-94,44x148-96-1.(7) 650˚F BLUE M, Mdl. POM7-256C-3Electric, 20” x 24” x 20” High, 240 Volt,Single Phase, 30 Amps, s/n P38-4636.280˚F HOTPACK SupermaticOven, 20” x 20” x 18” Wide, 115 Volt650˚F BLUE M, Mdl. #DC256C, s/n DC2485.600˚F BLUE M, Mdl. #AGC1466-2X,2KW, 12” x 12” Chamber Dimension.
(2) 200KW AJAX MagnathermicInduction Heater Power Supplies,Input-480 Volt, 224 KVA, 310 Amps, 60-Cycle, 3-Phase, Output-400 Volt, 200 KW, Single Phase, 9000 Amps,1100-3300 Cycles.(12) 100KW AJAX Magnathermic, Mdl.#A2 Induction Heater Power Supplies, Input-112 KVA, 480/60/3 Output-400 Volts, SinglePhase 2250 Amps, 1100-3300 Frequency.(6) 25KW AJAX Magnathermic, Mdl.#S3-10-25 Induction Heater PowerSupplies, Input-40 Volt, 32 KVA, 40 Amp,60-Cycle, 3-phase, Output-166/83 Volts,110KVA, 660/1320 Amps, 3000-10000 Hz.(8) 15KW INDUCTOTHERM, Mdl. 15-96,SOLID STATE Power Supplies.
(6) 1984 TRANTER Super ChangerPlate & Heat Exchangers, Mdl.XU296-HJ-17, 200˚F Max Temperature,100PSI Max Allowed Working Pressure,2.22”-2.39” Plate Dimensions, 60.51”Surface Area, 1,214 Lb. Net Weight,150PSI Test Pressure, s/n P31745H.
(3) CINCINNATI Temperature/Humidity Thermo-Cycle Chambers,Mdl. #ZH-8, 24” x 24” x 22” I.D., -73˚C (-100˚ F) to 190˚C (375˚F) TemperatureRange, 10% to 95% Relative Humidity asLimited by an 85˚C (185˚F) Max. Dry Bulb &4˚C (40 F) Min. Dewpoint Humidity Range,s/n’s ZF9542309, ZF9021300, 10816.
OVENS HEAT EXCHANGERS
TEMPERATURE/HUMIDITYCHAMBERS
INDUCTION HEATING UNITS
TRANTER Super Charger Plate &Heat Exchanger
CINCINNATI Temperature/Humidity Thermo-Cycle Chambers
15KW INDUCTOTHERM, Mdl. #15-96
650˚ GRIEVE Tunnel Oven
100KW AJAX Magnathermic200KW AJAX Magnathmermic Induction Heater
Power Supplies
THINKING OF HAVING
ANAUCTION?
CALL:(818) 508-7034
EXT. 12
7
(6) 30HP VICKERS Hydraulic Power PacksVICKERS Self Contained Pumps & Tanks, Mdl.#C2531.(10) PENNWALT STOKES Vacuum Pumps, Mdl.#412C, Lot #SC79087, 10 HP, Stokes, Mdl. #615 Blowers,s/n CC89582 & N/A. (See Photo on Page 12)
(4) 1997 ABB Electronically Operated Robots, Md.IRB6400/2.4, 6-Axis, Mdl. RB2200 Controllers, 2.4 MetersReach, 480V AC, 120KG Weight Capacity.
1989 MONARCH, Mdl. #VMC45, 4th Axis Rotary, 18-1/2” x 49” Work SurfaceTable, 11HP, GE FANUC Control, 40-Position Tool Changer, Chip RemovalSystem, Large Quantity of Tooling, s/n 89305.HURCO, Mdl. #BMC-30, #40 Taper Spindle, HURCO Ultimax Control, 24-Position Tool Changer, 20” x 40” Work Surface Table, s/n BK9006020C.
1989 WASINO, Mdl. LJ103M 24” x 48”, 10-T FANUCControl, 10” 3-Jaw Chuck.
LEBLOND REGAL Engine Lathe,24” x 72”, Taper Attachment, Full LengthLead Screw, 21” 4-Jaw Chuck,ANILAM Wizard 211 Digital Readout,1080 RPM. See Photo on Page 11.MONARCH Engine Lathe, 20” x72”, 26” Actual Swing, TaperAttachment, Full Length Lead Screw,700 RPM, s/n 36527.
(2) LEBLOND MAKINO REGAL ServoShift Engine Lathe, 15” x 48”, TaperAttachment, ANILAM Wizard DigitalReadout, Full Length Lead Screw, 10” 3-Jaw Chucks, Misc. Tooling, 1800 RPM,s/n’s 14C877, 14C878.HARDINGE Super PrecisionDovetail Speed Lathe, Mdl. DV-59-JO, Coolant, s/n DV5918627.
VACUUM PUMPS
ROBOTS
CNC VERTICAL MACHINING CENTERS
LATHES
CNC LATHE
LEBLOND MAKINO REGAL Servo Shift Engine Lathe
WASINO Mdl. LJ103MABB Electronically Operated Robot, Mdl . #IRB6400/2.4
1989
MONARCH Engine Lathe
MONARCH Vertical Machining Center, Mdl. #VMC45
MEDINA End Center Grinder,Mdl. B
CNC
HURCO Vertical Machining Center
1989
1997
CNC CNC
8
BULLARD 42” Spiral Drive, MINI-WIZARD DRO, 3-Jaw Chuck.
BRIDGEPORT Series I Mill, 2 HP, 9” x 42” Table, Digital Readout, Power Feed, 7” RaisedColumn, Power Draw Bar.BRIDGEPORT Series I Mill, 2 HP, 9” x 42’ Table Digital Readout, Power Feed, Power Draw Bar, s/n 246495.BRIDGEPORT Mill, 1HP, 9”x42” Table, Digital Readout, s/n 86751.KEARNEY & TRECKER Universal Horizontal Mill, Mdl. #2, 1500 RPM Max., 12” x 56”Table, s/n 135345.
BUFFALO, 4”x4”x1/2”, V-Notcheron Punch End, AC Motor Drive.
FOSDICK Heavy Duty SingleSpindle Floor Drill, 15” Overhang,24” x 30” Table, Power Feed.ALLEN Single Spindle Drill Press,14’ Overhang, 34” x 24” Table.
DRILLS
IRONWORKER
MILLS
FOSDICK Heavy Duty Single SpindleFloor Drill
BUFFALO Ironworker
KEARNEY & TRECKER Universal Horizontal Mill
BRIDGEPORT MILL, 1HP & BRIDGEPORT Series I Mill, 2 HP
OKAMOTO Hydraulic Surface Grinder,Mdl. #ACCUGAR 124N
KNOW OF A PLANT CLOSURE?
CALL:
(818) 508-7034EXT. 12
SPRINGFIELD/CONE BLANCHARD CROWN Vertical Grinder, Mdl. #1BTR
VERTICAL TURRET LATHE
9
LUCAS, Mdl. #41, 3’, Approx. 24” Vertical Travel, 24’ x 48” table, 1200RPM of Spindle
BROWN & SHARP Hydraulic, Mdl. #1224 Micromaster, 12” x 24”WALKER Electric Chuck, s/n 523-1224-2453.
OKAMOTO Hydraulic, Mdl. #Accugar 124N, 12” x 24” Chuck, AutomaticStep Control, Automatic Cross Feed Control, Table Speed Control, MagneticSeparator, Forced Coolant, OS WALKER Electromagnetic Chuck, s/n 7458.
TAFT PIERCE, Dust Collector, 6” x 12”.
BLANCHARD, Mdl. 18-36, 36” Magnetic Chuck,s/n 11529.
1974 SPRINGFIELD/CONE BLANCHARD Crown,Mdl. #1BTR, Square Column Machine, Adjustable, 18”Dia. Table, Angular Head Adjustment, s/n 74003.
Late Model LANDIS, Mdl. #1R, 6” x 18”,Hydraulic, 7 1/2 HP, s/n 90526.
HORIZONTAL BORING MILL VERTICAL SURFACE GRINDER
CYLINDRICAL GRINDER
VERTICAL GRINDERSURFACE GRINDERS
ALLEN Single Spindle Drill PressBLANCHARD Vertical Surface Grinder,
MDL. 18-36
LUCAS Horizontal Boring Mill, Mdl. #41
LANDIS Cylindrical Grinder, Mdl. #1R
TAFT PIERCE, Dust Collector
BROWN & SHARP Hydraulic Surface Grinder, Mdl. #1224
BULLARD 42” Spiral Drive
10
CHICAGO/D & K Power Apron Brake, Mdl. #PB82050, 8’ x 1/4”, AirClamping, Power Adjustments, s/n 120547.
HTC Hydratool Power Squaring Shear, Mdl. #250-8A, 8’ x 1/4”,1/4” Capacity Mild Steel/.375” w/ Higher Rake Angle, Hydraulic, SquaringArm, 36” Front Operated Power Back Gauges, s/n 11832483.
CHICAGO Box 7 Pan Brake, Mdl. #31, 4’, s/n 50684.
ROLSHEAR INC. Initial Pinch Type Plate Bending Roll, Mdl.#2C, 4’ x 10 Ga., 5” Roll Dia., Drop End, s/n 20446.
PEXTO Manual Pinch Type Sheet Forming Roll, Mdl. #390E, 36”x 16 Ga., s/n 535-4-88.
GREENLEE Electric Pipe Bender, Mdl. #555, 1/2”-1/4” Dia., 4-5/8-7-1/2” Radius, Motorized, s/n PL2017.
1990 MITSUBISHI CNC Wire EDM, Mdl.#DWC90C, 90 Amp, MITSUBISHI ProgrammableController, s/n 599C16262000 EDM Drill Electrode DrillingMachine, Mdl. #ST300, ELENIX TouchScreen Control, 12’ x 12” Working Surface.
MAGNAFLUX Demagnetizer, Mdl. #58911,s/n 991173
LOCKFORMER Vulcan Single TorchPlasma Shape Cutter, 5’ x 10’ Water Table,VULCAN Torch Screen Control, HYPOTHERMMAX100 Power Supply, s/n VUL-3073.
FABRICATION EQUIPMENT CNC EDM
CNC PLASMA CUTTER
MAGNAFLUX
HTC Hydratool Power Squaring Shear, Mdl. 250-8A MITSUBISHI Wire EDM Machine, Mdl. DWC90C
1990
CNC
LOCKFORMER VULCAN CNC Single Torch Plasma Shape Cutter
2000
EDM Drill ELECTRODE Drilling Machine,Mdl. ST300
GREENLEE Electric Pipe Bender, Mdl. 555
CHICAGO/D&K Power Apron Brake, Mdl. PB82050 ROLSHEAR, INC. Initial Pinch Type Plate Bending Roll, Mdl. 2C
CNC
11
500 Amp MILLER Tig Wig Welder, Radiator RunCooling System, s/n JF876381.200 Amp MILLER Wire Feed Welder, Mdl. #CP200.MILLER Dial-Arc-HF Electrode Welder.MILLER Tig Runner Tig Welder, s/n KK24542.
DOALL Horizontal Band Saw, Mdl. #C69, 1” BladeWidth, Hydraulic Clamping, Roller Conveyor, s/n 155701211.STARTRITE Horizontal Band Saw, Mdl. #H225 1”Blade Width, Clamping, Entry 7 Exit Conveyor.36” STARTRITE Vertical Band Saw, Mdl. #316H,Feed Band Blade Welder, s/n 97387.EVERETT INDUSTRIES Manual Abrasive Saw,Mdl.#1416, 14’ Blade, s/n 1898-6.
BINKS Spray type AlcoholDegreaser, 8’ x 2’, DualOscillating Nozzles, Dual 8” WideEntry Conveyors, 30” StrokeReciprocator, w/4’ x 4’ x 8’ FLEXKLEEN #100WSBS-49 Air PulseDust Collector.ZERO Blast & Peen BlastCabinet w/Dust Collector.
WISSOTA Ball BearingBench Grinder, 1/3 HP.MEDINA End Center Grinder,Mdl.#B, s/n 399.BALDOR Bench Grinder.(2) BALDOR Pedestal Grinders,3 HP.
1996 125 PSI ATLAS COPCO,Mdl. GA5 Electronikon w/ReceiverTank, 7.5HP, s/n AII110506.
(2) THERMAL CARE/MAYERPortable Chillers, Mdl. TC1W3500004,35-T, R-22 Refrigerant.
JWI, Mdl. 470G32-13-27-2/4MYLS,100 PSI Max Filtration Pressure,7000 PSI Hydraulic ClosingPressure, 18” Square Platen,Manual Pressure, Framework, 1000Gallon Fiberglass Tank TopMounted, 60” of 48” Wide Non-Motorized Conveyor, s/n 4330.
WELDERS
SAWS
GRINDERS
FINISHING EQUIPMENT AIR COMPRESSOR
CHILLERS
FILTER PRESS
BINKS Spray Type Alcohol Degreaser
STARTRITE Vertical Band Saw, Mdl. 316H
STARTRITE Horizontal Bandsaw, Mdl. H225
DOALL Horizontal Bandsaw, Mdl. C69
View of Welders
JWI Filter Press, Mdl. 470G32-13-27-2/4MYLS
LEBLOND REGAL Engine Lathe
12
AAF Rotoclone Wet Type, Mdl. #B,Type N, 24,000 CFM.AAF Optiflow Dust Collector.WHEELABRATOR Pulse Jet, Mdl.32 MDF.(2) FLEX KLEEN Air Pulse#100WSBS-49, 4’ x 4’ x 8’.FLEX KLEEN Cyclone Type AirPulse , 48” x 10’ High w/ Blower
SIP Calibration Machine, Type 300M, s/n 206.LECO Nitrogen/Oxygen Analyzer, Mdl. TCF136 EF100 Electrode Furnace.GAGEMASTER Optical Comparator, Series 20, 12”.1988 DETROIT Compression Testing Machine, Mdl. NST, 20,000 Lb.,22,000 Lb. Capacity on 4 7/8” Ram Diameter, s/n 1167.ROCKWELL MITUTOYO Digital Hardness Tester.SUPERMASTER Precision Layout Machine, 24”x36” Granite Surface Plate.Granite Layout Plate
DUST COLLECTORS INSPECTION & TESTING EQUIPMENT
AAF Rotoclone Wet Type Dust Collector, Mdl. #B AAF Optiflow Dust Collector PENNWALT STOKES Vacuum Pumps, Mdl. 412C
SIP Calibration Machine, Type 300M
LECO Nitrogen/Oxygen Analyzer, Mdl. TCF136
ROCKWELL MITUTOYO Digital Hardness Tester
4 Available4’x4’x8’ FLEX KLEEN #100WSBS-49 Air
Pulse Dust Collector
4 Available3-T T&M Underhung Crane
10 Available
13
1996 10,000 Lb. HYSTER ElectricFork Truck, Mdl. E100X-33, Solid Tire,High Visibility Mast, Fork Shifter, ForkRotator, s/m C098DO21009T.(3) 1986 6,000 Lb. HYSTERElectric Fork Truck, Mdl. E60XL-33,Fork Shifter, High Visibility Mast, s/n’s C108V03479G, F108V03480G,100FSHS-B041/
6,000 Lb. CLARK Gas Fork Truck,Hard Tire, High Visibility Mast, ForkRotator, 225 Hours.1989 5,000 Lb. HYSTER ElectricFork Truck, Mdl. E50XLC-27, SolidTire, High Visibility Mast, Fork Shifter.Year 2000 4,000 Lb. CROWNElectric Hard Tire Fork Truck, HighVisibility Mast, Side Shifter, s/n 9A115855.
15-T BRODERSON Cherry PickerHyd. Crane, Mdl. IC200-2B, Side Cab Operated, LP Power, HydraulicOutriggers, 15’ Jib Attachment, PneumaticTires 2-Wheel Drive, 4-Wheel Steering,s/n 42061.KALAMAZOO Speed Truck SumpSucker, Mdl. 2500V4LW, ElectricPowered Truck w/KOHLER 22HPSuction Pump, 500 Gallon Tank.
10-T P & H Overhead Bridge Crane, 60’ Span, DoubleBox girder construction, Top Running, Pendant FloorControlled, AC, s/n CB29277.(2) 3-T T & M Underhung Crane, Approx. 40’ Span, P &H Ready-Lift Hoist. Underhung Trolley, Underhung Bridge,Runaway, Radio Controlled, s/n’s 35494B, 35494.(2) 3-T T & M Underhung Crane, 35” Span Approx., P &H Hoist, Underhung Trucks, Underhung Hoist, 6-Way Power,Radio Controlled, s/n’s 35654A, 35654B.2-T ABEL HOWE Free Standing Jib Crane, P & HElectric Hoist, Radio Controlled.
(2) 1-T T & M Underhung Cranes, 30’ Span Approx., P&HHoist, Underhung Trucks, Underhung Hoist, 6-Way Power,Radio Controlled, s/n’s 35654D, 35654C.2-T SHAW BOX Underhung Hoist, Approx. 20’ Span Radio Controlled.(2) 1-T SHAW BOX Underhung Crane, Approx. 20’ Span,Underhung Hoist w/ Beam, Radio Controlled.1-T P & H BETA Underhung Hoist, Approx. 20’ Span,Runaway, Radio Controlled.1-T HURRICANE Overhead Hoist, Underhung Truck,Underhung Trolley, P & H Zip3 Power Hoist, Radio Controlled.
CRANES & HOISTS
FORKLIFTS ROLLING STOCK
10-T P&H Overhead Bridge Crane
15-T BRODERSON Cherry Picker Hydraulic Crane, Mdl. IC200-2B KALAMAZOO Speed Truck Sump Sucker, Mdl. 2500V4LW
NEED ANAPPRAISAL?
CALL:
(818) 508-7034, EXT. 12
View of BIG JOE, HLT & LEE ENGINEERING CO. Pallet Trucks
14
6,000 Lb. HLT Battery Operated Pallet Truck,High Visibility, Triple Mast.(2) 5,000 Lb. HY-LIFT Hydraulic Elevators, Mdl. #M,4’x8’ Platform, Approx. 24’ Lift, s/n 6306-M-S.(4) 5,000 Lb. HY-LIFT Series H Hydraulic Elevators,64”x60” Platform, 15’ Lift, s/n 6353H-5.1998 3,000 Lb. BUSHMAN Electronic ElevatingPlatform, Mdl. CLT03-48-44050-S, 48” Platform, s/n 990319.(3) 2,500 Lb. AUTOQUIP Lift Tables, HydraulicallyActuated, 4’x4’ Work Platform.1,500 Lb. BIG JOE Pallet Truck, Mdl. 1518-18, s/n358204.1,000 Lb. MARKLIFT Electric Scissor Lift, Mdl. 301D,28’ Est. Lift Height, 5’x11’6” Work Platform, Pneumatic Tires,s/n D4637.
1,000 Lb. LEE ENGINEERING CO. Pallet Truck, Mdl.#C74. s/n 65249.500 Lb. SILMON EAGLE Manlift, Mdl. 4124, 24’ Height,Pneumatic Tire, Electrically Operated, 2-Wheel Drive, 2-Wheel Steering.1997 500 Lb. HI-JACK/TEREX Man Lift, Mdl. TA64, 480 Hours,LP Gas, Bucket Type, 63’3” Reach, (2) Occupants, s/n 7721.(200) 18”x30” Deep Tote Castor Mounted PowderTransporters, IRIS Valve Tops.40”x30”x24’ 9-Zone Gravity Powered RetrievalSystem, (2) 9-Zone Sections.4’x4’x18” Metal Stacking Containers.Pallet Racking.Tote Box Dumper.Best Dump Hopper, Shaker Table & Batching Table.
MATERIAL HANDLING
500 Lb. SIMON EAGLE Manlift, Mdl. 4124 500 Lb. HI-JACK/TEREX Man Lift, Mdl. TA64
1997
3 Available2,500 Lb. AUTOQUIP Lift Tables
1,000 Lb. MARKLIFT Electric Scissor Lift, Mdl. 301D
200 Available18’x30” Deep Tote Castor Mounted Powder Transporters
View of Forklifts
7 Available
15
TENANT Floor Sweeper, Mdl. 240EH, 1255 Hours, Electric Powered,36V Battery Charger • TENANT Power Scrubber, Mdl. 540E, ElectricPowered, 1,073 Hours, 36V Battery Charger • AIRLUX Smoke Eater,Mdl. 5000 • TOLEDO Digital Platform Scale, Mdl. 8142, 60”Platform, s/n 4137074/4RM • (36) VIDMAR Workstations • ORIONStretch Wrap Machine, 60” Diameter Tumble.
SWAIN Screw Press, Mdl. 3 • 3” Wide Belt Sander • ELECTROARCTap Disintegrator, 18”x36” Table • DAREX Drill Sharpener w/ Fixtures.
Desks, Chairs, Conference Tables, File Cabinets, CompleteKitchen & Much More!
PLANT SUPPORT EQUIPMENT
MISCELLANEOUS EQUIPMENT
OFFICE FURNITURE & EQUIPMENT
4’x4’x18” Metal Stacking Containers 40”x30”x24’ 9-Zone Gravity Powered Retrieval System AIRLUX Smoke Eater, Mdl. 500
View of TENANT Floor Sweeper, Mdl. 240EH & TENANT Power Scrubber, Mdl. 540E
36 AvailableView of VIDMAR Workstations
VIDMAR Cabinets Fireproof Cabinets
ORION Stretch Wrap Machine
Electronic Tap Disintegrator
Conference Table
Sale Conducted by: Industrial Assets, Inc., Subject to our customary terms of sale, (Availableat the auction site on the day of the sale), and any and all amendments and modificationsannounced by the auctioneer at the time of the auction. The auctioneer and seller make nowarranties or guarantees, expressed or implied, as to the defects in or the correctness oraccuracy of the descriptions in any advertising of any item(s) being auctioned and will notbe responsible for any advertising discrepancies or inaccuracies of any kind. All items soldwill be on an “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”, basis “WITHOUT EXCEPTION”and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE”. AUCTIONEER AND SELLER MAKE NOWARRANTIES OR GUARANTEES OF ANY KIND, EXPRESSED OR IMPLIED AS TO THE NATURE,QUALITY, VALUE OR CONDITION OF THE ITEM(S) BEING AUCTIONED OR ITS (THEIR)SUITABIL-ITY FOR ANY USE. AUCTIONEER AND SELLER EXPRESSLY AND SPECIFICALLY DISCLAIMWITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICU-LAR PURPOSE. AUCTIONEER SHALL NOT BE LIABLE FOR SPECIAL, CONSEQUENTIAL OR INCI-DENTAL DAMAGES. It shall be the buyer’s obligation to verify information and descriptions ofproperty prior to sale. Industrial Assets, Inc., and its advertising agency assume no liabilityfor errors or omissions in this brochure. The auctioneer does not warrant the age,accuracy,genuineness, authenticity, description, weight, count or measure of any listings specifiedherein. Although it is not likely, auction sales are subject to cancellation or postponement,and sometimes items are withdrawn from the sale, kindly contact Industrial Assets, Inc.,prior to travel as there will be no reimbursements. On the day of the sale, all successful bid-ders must immediately pay the full purchase price in cash, certified funds, cashiers check,wire transfer or company check with a letter from the buyer’s bank guaranteeing unquali-fied payments to Industrial Assets, Inc. Your letter should be similar to the following: [Mr.“Customer Name” is a customer of this bank. This bank will guarantee unqualified paymentto Industrial Assets, Inc. on the account listed herein up to the amount of $______. This let-ter is valid until 30 working days after the auction sale.] Company checks without letter frombank guaranteeing unqualified payment will not be accepted. The failure to make paymentpromptly shall be considered default and each lot or lots so purchased will be placed forresale. The buyer must pay the total invoice price for all the lots purchased before anyremoval can begin. All buyers must pay applicable sales tax (unless evidence of exemptionis provided to auctioneer’s satisfaction). Buyers are responsible for the transportation, asso-ciated costs and risks involved in the removal of purchased item(s). Certain items may con-tain residual chemicals and/or hazardous materials. The purchaser(s) hereby indemnify andhold harmless the auctioneer and seller from any and all damages, claims or liability fromany injuries to persons or property of any type whatsoever caused during the sale of, duringthe removal, or during use or operation of the purchased item(s). If you are unable to attend,please contact us regarding placing a proxy bid. ALL ITEMS SUBJECT TO PRIOR SALE.PLEASE NOTE: All sales are subject to a 10% buyer’s premium.
TERMS
THINKING OF HAVINGAN AUCTION?
NEED AN APPRAISAL?KNOW OF A PLANT
CLOSURE?
(818) 508-7034 EXT. 12
CALL:
9:30AM
THURSDAYSEPTEMBER12
TH
6435 SCATTERFIELDRD.ANDERSON, IN
INSPECTION: WEDNESDAY,SEPTEMBER11TH,9AM-4PM& MORNINGOFSALE
MAGNEQUENCH INTERNATIONAL, INC.ASSETSNOLONGERREQUIREDINTHECONTINUINGOPERATIONSOF:
biditup11426Ventura Blvd. Second FloorStudio City, CA 91604
Steven Mattes, AuctioneerIN Lic. #AU19700033
FIRST CLASS PRE-SORTMAIL U.S. POSTAGE
P A I DPERMIT NO. 32365LOS ANGELES, CA
UPCOMING AUCTIONSUPCOMING AUCTIONSESTATE SALECLASSIC CARS, TRUCKS, SPORT VEHICLES, COMPLETE MACHINE SHOPEscondido (San Diego), CA
By Order of Owner:
J J PRECISION TURNED PRODUCTS, INC.BROWN & SHARP SCREW MACHINE & CNC MACHINING FACILITYCanoga Park, CA
Surplus to Ongoing Operations of:
BTA PERFEX: DIVISION OF THERMAL ENGINEERING INTL.
FABRICATING & CNC MACHINING FACILITYMilwaukee, WI
MASTERCRAFT PRECISIONCNC TOOL & DIE FACILITYMilpitas, CA
By Order of US Bankruptcy Court:
COULTER FORGE, INC.STATE-OF-THE-ART FORGED RING ROLLING FACILITYEmeryville, CA
Assets No Longer Required in the Ongoing Operations of:
CAMI AUTOMOTIVEAUTOMOTIVE ASSEMBLY PLANTIngersoll, ONT., Canada
Assets Formerly Of:
ROPER CORP.STAMPING FACILITYChattanooga, TN
Assets No Longer Needed in Continuing Operations:
BAXTER HEALTHCAREEXTRUSION LINES/EXTRUDING MACHINERYMiami Lakes, FL
EDGEWIND SALES & MANUFACTURING, LTDSTAMPING FACILITYTecumseh, ONT., Canada
STATE-OF-THE-ARTMAGNET&POWDERMETALMANUFACTURERSTATE-OF-THE-ARTMAGNET&POWDERMETALMANUFACTURER
VISIT:www.biditup.comFOR ADDITIONAL ONGOING LIQUIDATIONS
& ONLINE SALESAugust 10
August 13
August 22
September 9
September 10
September 19
September 24
September 26
October 1
#1
#2
#3
#4
#5
#6
#7
#8 DIRECTIONS FROM INDIANAPOLIS METROPOLITAN AIRPORT
Take the I-69 (SR-37) North. At I-69 Exit 26, Turn off ontoRamp. Turn Right (South) on Scatterfield Rd. Watch forAuction Signs.#9