Magnetic Components for Communications and Data Line ... Catalog.pdf · E1 / T1 / PRI / CEPT IC Selection Guide for Single & Dual Interface Transformers - 16 - 17 Single and Dual

SE

CT

ION

5Data Line EMI Filters •Components for ISDN and LAN •

Common Mode Interface Chokes • Isolation/Coupling and Pulse Transformers • Interface Signal Transformers and Modules •

SO, E1/T1/PRI/CEPT, U, xDSL Interface Transformers •

Magnetic Components forCommunications and Data Line Technology

Talema Group • Magnetic Components • www.talema.com

Magnetic Components for ISDN / xDSL / LAN Data Communications

CONTENTS Page Nr. Introduction and Electrical Specificifications and Definitions - 3 Quick Reference Guide to Common Mode Interface Chokes - 4Telecom Products

ISDNS / SO Single Interface Transformer IC Selection Guide - 5S / SO Single SMD and THT Interface Signal Transformers (ISJ & ISV Series) - 6 - 7S / SO Interface Module IC Selection Guide - 8S / SO Dual SMD and THT Interface Modules incorporating transformers with a quad choke for balance andnoise suppression. Standard through Ultra-miniature SMD packages (MUJ, MMJ & MAJ Series) - 9 - 11

EBroad Band Access ADSL Interface Transformers SDSL / SHDSL Transformers for Infineon Chipsets (SEP Seies) - 12-13 Line Interface 56kbps Modem Transformer (LTM-110A) - 14-15E1 / T1 / PRI / CEPT

IC Selection Guide for Single & Dual Interface Transformers - 16 - 17Single and Dual Compact and Miniature SMD & THT Interface Transformers MJM & IS2M Series) - 18 - 20

Network Products for LAN \ EthernetIC Selecton Guide for 10Base-T - 21IC Selection Chart for 10/100 Base-T, LAN Fast Ethernet & ATM Transformer Modules - 22 - 2310 Base-T Single Port SMD Transformer Modules (TMM Series) - 24

10 Base-T Single Port SMD Transformer with Common Mode Choke for EMI Suppression (TMCM Series) - 25 10/100 Base-T Single Port Transformer Modules (TEM Series) - 26-28Common Mode EMI Noise Suppression Chokes for LAN and Telecom Applications - 29 - 32Tape & Reel Packing and Dimensions - 33 - 34Regional Locations - Design, Manufacturing, Sales & Marketing - 35TALEMA Product Summary (Total Program) - 36

Visit our websites for detailed electrical and mechanical specifications for Talema’s extensive line of Magnetic Componentsfor Toroidal Transformers, Power Conversion & LAN Applications:www.talema.comwww.nuvotem.comwww.ntmagnetics.cz

2


04/19

TALEMA PROFILEFounded in 1975, The TALEMA International Group hasestablished itself as a world leader in the Design &Manufacture of toroidal transformers and related magneticcomponents. Our strong technical engineering expertise hascontributed to the growth of our current workforce to over 800employees in manufacturing locations in the Czech Republicand India.

Over the years The Talema Group has succeeded indesigning, producing and delivering in excess of 50 milliontransformers to its customers. The recent incorporation ofxDSL technology into our extensive range of Telecom andLAN magnetics offerings, such as ISDN, Ethernettransformers for 10/100/1000Base-T, has broadened ourmarket offering to an even higher level.

QUALITYThe TALEMA Group has a total commitment to quality andemploys Lean Six Sigma training for engineering, productionand administrative staff to help achieve a goal of zero defects.All facilities maintain very stringent Quality Control and QualityAssurance procedures and are certified to and manufacturein accordance with ISO 9001:2015 (India) and ISO 9001:2016(Czech Republic) and meet a broad range of InternationalStandards including UL, VDE, IEC and EN.

ENVIRONMENTAll TALEMA International Group manufacturing facilities areRoHS & REACH Compliant and all chokes, inductors and HFComponents are produced in an Environment ManagementSystem (EMS) facility certified to ISO 14001:2015 (India) andISO 14001:2016 (Czech Republic).

Electrical Specifications and Definitions

Unless specified otherwise, all electrical ratings are measuredat 25°C ambient

Transformers

Turns Ratio: Bold Face = IC side (secondary) windings

LP = Inductance when the primary (line side) windings areconnected in series (f = 10kHz; 100mVrms)

LL = Leakage inductance of series connected primary(line side) windings with secondary (IC Side) windings

series connected and short circuited (f = 100kHz,100mVrms)

^IDC = Maximum permissible DC asymmetry in the primary

CC = Coupling capacitance between parallel connectedsecondary (IC side) windings and primary (line side)windings (f - 10kHz)

CW = Winding capacitance of series connected primary(line side) windings (nominal value)

RCU = DC resistance per winding

RCUP = Nominal DC resistance of the primary (line side)windings when connected in series

RCUS = Nominal DC resistance of the secondary (IC side)windings when connected in series

RCUT = Nominal DC resistance of the tertiary winding

VP = Test voltage on line side windings to IC sidewindings at 50/60 Hz for 2 seconds

Chokes

LN = Inductance of each winding measured at10kHz/100mV, unless otherwise stated.

IN = Current rating per winding

IDC = Maximum allowable DC current

LL = Leakage inductance of an individual winding whenall other windings are short circuited (f = 100kHz50mV)

RCU = Nominal DC resistance of a winding

VP = Test voltage at 50/60 Hz for 2 seconds, windingto winding

Introduction

Talema produces a broad range of inductive components forData Communication applications including S and U Interfacetransformers and modules as well as Primary Rate, T1 andCEPT and Ethernet transformers and common mode chokesfor EMI supression.

S / SO Interface Signal Transformers are available in single anddual packages on high permeability ferrite cores. Additionally,most industry standard packages are available in both throughhole and surface mount configuration, offering the designengineer a wide variety of options suitable for about anyapplication.

Talema's S / SO Interface transformer/choke modules providea cost effective alternative to S interface solutions comprised ofindividual components. Incorporating two toroidal transformersand a current compensated noise suppression quad choke, themodules are available in both standard and miniature ChipSMD and through hole packages for optimal utilization ofvaluable PCB space.

E1/T1/PRI/CEPT Interface transformers and modules providea high transmission rate and narrow mask in non-bias interfacebetween the network termination and the branch exchange.The components are available in both standard and miniatureSMD and DIL packages.

A cost effective range of U interface transformers for 2B1Q and4B3T applications for equipment transmission between customerpremises and exchanges is now available from Talema. Thetransformers meet all the requirements of recognized U interfaceIC's and ANSI standard T1.601 with a highly reliable pulseshape and return loss performance.

Current compensated noise suppression and filter chokes aredesigned for interfacing and virtual elimination of noise in ISDNand other data line transmission applications. The broad rangeoffered by Talema features high attenuation over a widefrequency range, all popular winding/core combinations andthrough hole DIP, DIL and SMD packaging options at extremelycompetitive prices.

In addition to the ISDN inductive component range, Talema ismanufacturing an extensive line of transformers for couplingand isolation in LAN, Ethernet, 10/100 Base-T and othertelecommunication applications as well as transformers forgeneral pulse and RF applications. All transformers areproduced in industry standard DIP and SMD packages whichcan accommodate most conventional flow soldering processesand are automatically insertable.

All inductive components for telecommunications aremanufactured in an ISO 9001:2015 and ISO 14001:2015certified Talema facility, offering excellent quality at extremelycompetitive prices.

Inductors and Transformers for ISDN and Telecommunications

We reserve the right to make improvements and changes to the products in this catalog at any time and without notice.Please contact Talema for the latest specifications and product data.

3


4

Common Mode Interface Chokes for Data and Signal Line Suppression

Talema manufactures a comprehensive range of commonmode noise suppression chokes designed for interfacing andreduction of electromagnetic inteference (EMI). These chokesprovide both differential and common mode noise attenuationwhile allowing the signal to pass through virtually undistorted.The chokes are available in sizes ranging from standard toultra miniature in both DIL and SMD styles and offercompatability with all common footprints. The quick referencechart shown below provides a quick overview of choicesavailable from the broad selection being offered by Talema.


sekohCecafretnIedoMnommoCDMSdnaLID

seireS ecnatcudnIegnaR

rebmuNseniLfo

gnitnuoMelytS

stcatnoC.oNhctiP&

aerAdraoB.xaM)mm(tHxLxW

XXX-2-JTC Hm7.4-Hµ11 2DMSdaeL"J" 72.1x4 3.3x3.3x0.5

S-XXX-2-JTC Hµ15-Hµ11 2

XXX-2-JLC Hm74-Hµ5 2

DMSdaeL"J"45.2x4

8.4x4.5x9.8S-XXX-2-JLC Hµ15-Hµ6 2

XXX-4-JLC Hm21-Hµ11 4 72.1x8

XXX-2-JMC Hm74-Hµ5 2DMSdaeL"J"

45.2x43.5x8.5x0.9

XXX-4-JMC Hm21-Hµ5 4 72.1x8

XXX-2-JCC Hm07-Hµ62 2DMSdaeL"J"

26.7x40.9x0.11x0.41

XXX-4-JCC Hm85-Hµ62 4 45.2x8

XXX-JDC Hm07-Hm0.1 2DMSdaeL"J"

61.01x47.11x2.31x6.61

XXX-JQC Hm09-Hm0.1 4 45.2x8

XXX-FDCHm07-Hm0.1

2 THT-talF61.01x4

0.11x5.21x0.41

XXX-VDC 2 THT-lacitreV 5.41x0.41x0.9

XXX-FQCHm09-Hm0.1

4 THT-talF45.2x8

0.11x5.21x0.41XXX-VQC 4 THT-lacitreV 5.41x0.41x0.9

eniLataDXXX-VKC Hm86-Hµ021 2THT-lacitreV 80.5/45.2x4 6.71x2.51x4.7

eniLrewoPS-XXX-VKC Hm74-Hm7.4 2E61-XXX-JUC

Hm7.4-Hµ42

4

DMSdaeL"J" 72.1x61 0.6x8.21x6.9

C61-XXX-JUC 6

D61-XXX-JUC 6

A61-XXX-JUC 8

B61-XXX-JUC 8

sretliFeniLataD 61ot2 DMSdaeL"J" suoiraV

5

S-CINDSI O ediuGecnerefeRssorCremrofsnarTecafretnI

rerutcafunaMCICI

rebmuNtraP

rebmuNtraPamelaTeloHhguorhT tnuoMecafruS

lacitreV erutainiM

orciMletaclA 271202CTM,97202CTM77202CTM,67202CTM,8202CTM1A021-VSI1B041-VSI

B041-JSID041-JSI

pihCengoloC seireSxxxS-CFH1A021-VSI1B041-VSI

B041-JSID041-JSI

)DMA(ytiregeL A23C97MA,A03C97MA 1B041-VSIB041-JSID041-JSI

tnecuL00097,0437T,9527T,6527T,4527T,2527T,0527T,4327T 1B031-VSI

3097T,1097TA021-VSI

1B041-VSIB041-JSID041-JSI

ceteiM 2702-CTM1A021-VSI1B041-VSI

B041-JSID041-JSI

letiM 1398TM,0398TM1A021-VSI1B041-VSI

B041-JSID041-JSI

alorotoM574541,474541CM 1B001-VSI

B001-JSID001-JSI

475541CM 1B031-VSI

lanoitaN 1243PT,0243PT1A021-VSI1B041-VSI

B041-JSID041-JSI

CEN 10289D1A021-VSI1B041-VSI

B041-JSID041-JSI

SGS 1245TS,0245TS1A021-VSI1B041-VSI

B041-JSID041-JSI

noenifnI

31908,21908FEP,00908BEP31928,21928,31918,21918FEP

20928,20918FEP

1A021-VSI1B041-VSI

B041-JSID041-JSI

6803,1803FEP/BEP05112,6813FSP/BSP

48312,28312,18312BSP1B001-VSI

B001-JSID001-JSI

ISLV 00008SNV1A021-VSI1B041-VSI

B041-JSID041-JSI

amahaY 5057MY1A021-VSI1B041-VSI

B041-JSID041-JSI

knilraZ 1398/0398TM1A021-VSI1B041-VSI

B041-JSID041-JSI

IC - SO Single Interface Transformer Selection Guide

Standard Packaging: SMD styles - Tape and Reel; TH T styles - Anti Static tubes.


Talema manufactures a wide range of transformers for all SO

ISDN applications. A complete listing of transceiver IC’s withrecommended Talema transformers is listed on the followingcross reference chart.

Performance has been proven in the many design-in’s ofour products in these applications. Quality and consistencyis guaranteed through 100% testing of the specifiedparameters for Primary Inductance, Leakage Inductance,Turns Ratio, DC resistance and Interwinding Capacitance.This ensures that the Return Loss and Pulse Waveshaperequirements for S-Interface can be met. Additionally, all partsare tested for 1500V minimum isolation

6

0541LUdna0591LU,05906NEleveLnoitalusnIcisaBhtiwylpmocseireSJSI

rebmuNtraPLP

)niMHm(snruToitaR

LL)Hµ(

I^ CD)Am(

CC)xaMFp(

R UC P)smhO(

R UC S)smhO(

VP)smrV(

B001-JSI 52 :1:1 1:1 2 -- 06 2.4 2.4 0051

B041-JSI 52 :1:1 2:2 2 -- 05 3.4 9.9 0051

Package Style

ISJ

Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings

ISJ Series • ISDN SO Single Interface Transformers

Features• Designed for optimum compatability with all established interface IC’s• Excellent and consistent balance between windings• Complies fully with CCITT.I.430 recommendations and corresponding national standards for S-Interface• Manufactured in an ISO 9001:2015 and

ISO 14001:2015 certified Talema facility• Operating temperature: 0 to 85°C• Fully RoHS & REACH Compliant and meets lead free reflow level J-STD-020C

Schematic


Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwiseSurface Coplanarity will be 0.004 (0.10) maximum

Packing Method: Tape and Reel; Qty/Reel: 1000 Pcs

0.189(4.80)

0.35(8.90)

0.0315(0.80)

0.05(1.27)

0.394(10.0)

0.09(2.30)0.213

(5.40)

W/Y

TAL

IN14

0BIS

J-

0.287(7.30)

0.213(5.40)

1 4

58

SuggestedPad Layout

0.016 x 0.016 (0.40x0.40)

8

7

6

5

Line1

2

3

4

IC

Test Conditions:Inductance: Line side windings in series - measurement @ 10KHz/100mVPolarity and turns Ratio: Pins 1-2 : 3-4 : 5-6 : 7-8Coupling capcitance: IC side windings in series to Line side windings in series - measurement @10KHz/100mVLeakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100KHz/100mVTest Voltage: 1.5KVrms for 2 Sec. - Line side windings in series to IC side windings in series.

Standard Packaging: Tape and Reel

7


0541LUdna0591LU,05906NEleveLnoitalusnIyrtnemelppuShtiwylpmocseireSVSI

rebmuNtraPLP

)niMHm(snruToitaR

LL)Hµ(

I^ CD)Am(

CC)xaMFp(

R UC P)smhO(

R UC S)smhO(

VP)smrV(

citamehcS

1B001-VSI 03 :1:1 1:1 01 5 051 7.1 0.2 0051 1B

1A021-VSI 03 :1:1 4 01 5 051 7.1 0.4 0051 1A

1B031-VSI 03 :1:1 5,2:5,2 01 5 051 7.1 5.4 0051 1B

1B041-VSI 03 :1:1 2:2 01 5 051 7.1 0.4 0051 1B

Package Style


ISV Series • DN SO DIL Style Through Hole Interface Transformers

Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwiseUnused pins are removed

Features• Designed for optimum compatability with all established interface IC’s• Excellent and consistent balance between windings• Complies fully with CCITT.I.430 recommendations and corresponding national standards for S-Interface• Manufactured in an ISO 9001:2015 and

ISO 14001:2015 certified Talema facility• Operating temperature: 0 to 85°C• Fully RoHS & REACH Compliant

SchematicISV

0.591 (15.00) 0.059 (1.50)

0.138 (3.50)

0.300 (7.62)

0.354 (9.00)

0.400 (10.16)

0.100 (2.54)

5 6

1 10

0.551(14.00)

3

8

1

10 5

6

ICLine

A1 B1

4

7 5

6

1

10 2

9

ICLine

0.0197 x 0.0197 (0.50 x 0.50)

IC - SO Interface Module Selection Guide

Talema manufactures a wide range of signal transformers forall SO ISDN applications. Space saving modules, available inthrough hole and surface mount packages, offer a cost effectivealternative to individual transformers and chokes and are com-patible with all common IC’s. A complete listing of transceiverIC’s with recommended Talema transformer modules is listedon the following cross reference chart.

Performance has been proven in the many design-in’s of ourproducts in these applications. Quality and consistency isguaranteed through 100% testing of the specified parametersfor Primary Inductance, Leakage Inductance, Turns Ratio, DCresistance and Interwinding Capacitance. This ensures thatthe Return Loss and Pulse Waveshape requirements for S-Interface can be met. Additionally, all parts are tested for 1500Vminimum isolation.

S-CINDSI O ediuGecnerefeRssorCeludoMecafretnI

rerutcafunaMCI CIrebmuNtraP

rebmuNtraPamelaT

tnuoMecafruS

/dradnatStcapmoC erutainiM

orciMletaclA 271202CTM,77202CTM,67202CTM A304-JAM A301-JUM

pihCengoloC seireSxxxS-CFH A304-JAM A301-JUM

)DMA(ytiregeL A23C97MA,A03C97MA A304-JAM A301-JUM

tnecuL9527T,6527T,4527T,0527T,4327T A504-JAM A501-JUM

3097T,1097T A304-JAM A301-JUM

ceteiM 2702-CTM A304-JAM A301-JUM

letiM 1398TM,0398TM A304-JAM A301-JUM

alorotoM574541CM,474541CM A004-JAM A001-JUM

475541CM A504-JAM A501-JUM

lanoitaN 1243PT,0243PT A304-JAM A301-JUM

CEN 10289D A304-JAM A301-JUM

SGS 1245TS,0245TS A304-JAM A301-JUM

noenifnI

6802,5802,4802,2802,0802BEP6112BSP,5112BSP A304-JAM A301-JUM

1918,0918,1908,0908BEP)V5(38312BEP,)V5(18312BEP A304-JAM A301-JUM

48312BSP,28312BSP,)V3.3(18312BSP46813BSP,6803BEP,)V3.3(38212BSP A004-JAM A001-JUM

ISLV 0008SNV A304-JAM A301-JUM

amahaY 5047NY A304-JAM A301-JUM

8

Standard Packaging: SMD styles - Tape and Reel; TH styles - Anti Static tubes.

THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications


MUJ Series • ISDN SO Miniature SMD Interface Modules

Features• Excellent output characteristics ensure compliance with CCITT.I.430

pulse waveform template when used with recommended IC pairing• SMD modules are designed for pick and place compatability• Excellent and consistent balance between windings• Modular design maximizes suppression effectivity and transmission

properties• Full compatibility with all common IC's• Manufactured in an ISO 9001:2015 and

ISO 14001:2015 certified Talema facility• Fully RoHS & REACH Compliant and meets lead free reflow level J-STD-020C• Operating temperature: -40° to 85°C• Storage temperature: -40 to +125°C


Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25)unless specified otherwiseSurface Coplanarity will be 0.004 (0.10)


Test Conditions:• Polarity and Turns Ratio: ±1%• Inductance: 25mH minimum, line side windings in series @10KHz/1000mV• Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100KHz/100mV• Coupling capacitance: IC side windings in series to Line side windings in series @ 10KHz/100mV• Common Mode Choke Inductance: 100KHz/20mV• Test Voltage: 1.5KVrms for 2 Sec. - Line side windings inseries to IC side windings in series

MUJ Miniature Module Suggested Pad Layout

0.079(2.00)

0.394(10.60)

0.031(0.80)

0.050(1.27)

0.350(8.89)

dna0591LU,05906NEleveLnoitalusnIcisaBhtiwylpmocseludoMDMSpihCerutainiM 9541LU

rebmuNtraPLP

)niMHm(snruToitaR

LL)xaMHµ(

CC)xaMFp(

R UC P)smhO(

R UC S)smhO(

VP)smrV(

citamehcS

XXX-BroA001-JUM 52 :1:1 1:1 5 05 7.2 3.3 0051 BroA

XXX-BroA301-JUM 52 :1:1 2:2 5 05 7.3 4.8 0051 BroA

XXX-BroA501-JUM 52 :1:1 5.2:5.2 5 05 2.5 5.01 0051 BroA

ekohCdauQedoMnommoC

xiffuS+N/PcisaB LN)Hµ(

R UC)smhO( xiffuS+N/PcisaB R UC

)smhO( xiffuS+N/PcisaB R UC)smhO(

000-A001-JUM ekohCoN 000-A301-JUM ekohCoN 000-A501-JUM ekohCoN

005-BroA001-JUM 05 4.0 005-BroA301-JUM 5.0 005-BroA501-JUM 7.0




0.378(9.60)

0.504(12.80)

0.350(8.89)

0.077 (1.96)

0.346(8.80)

TALEMA INWK/YR

Part Number

0.189(4.80)

0.236(6.00)

Pins: 0.012 x 0.020 (0.30 x 0.50)

AICLine

16

1514

13

12

1110 9

1

23

4

5

67

8

Schematics - With Quad ChokeB

ICLine10

9

11

15

16

14

5

12

4

3

13

6

7

8

1

2

Schematic(Without Choke)

AICLine

16

1514

13

12

1110 9

1

23

4

5

67

8

9


MMJ Series • ISDN SO Miniature SMD Interface Modules

Features• Excellent output characteristics ensure compliance with CCITT.I.430

pulse waveform template when used with recommended IC pairing• SMD modules are designed for pick and place compatability• Excellent and consistent balance between windings• Modular design maximizes suppression effectivity and transmission

properties• Full compatibility with all common IC's• Manufactured in an ISO 9001:2015 and

ISO 14001:2015 certified Talema facility• Fully RoHS & REACH Compliant and meets lead free reflow level J-STD-020C• Operating temperature: -40° to 85°C• Storage temperature: -40 to +125°C

dna0591LU,05906NEleveLnoitalusnIlanoitcnuFhtiwylpmocseludoMDMSpihCerutainiM 9541LU

rebmuNtraPLP

)niMHm(snruToitaR

LL)xaMHµ(

CC)xaMFp(

R UC P)smhO(

R UC S)smhO(

VP)smrV(

citamehcS

XXX-BroA001-JMM 52 :1:1 1:1 5 05 7.2 3.3 0051 BroA

XXX-BroA301-JMM 52 :1:1 2:2 5 05 7.3 4.8 0051 BroA

XXX-BroA501-JMM 52 :1:1 5.2:5.2 5 05 2.5 5.01 0051 BroA

ekohCedoMnommoC

xiffuS+N/PcisaB LN)Hµ(

R UC)smhO( xiffuS+N/PcisaB R UC

)smhO( xiffuS+N/PcisaB R UC)smhO(

000-A001-JMM ekohCoN 000-A301-JMM ekohCoN 000-A501-JMM ekohCoN

005-BroA001-JMM 05 4.0 005-BroA301-JMM 5.0 005-BroA501-JMM 7.0




MMJ Miniature Module SuggestedPad Layout

0.079(2.00)

0.394(10.60)

0.030(0.75)

0.050(1.27)

0.350(8.89)


Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25)unless specified otherwiseSurface Coplanarity will be 0.004 (0.10)


0.216(5.50)

0.256(6.50)

Pins: 0.016 x 0.016 (0.40 x 0.40)

0.378(9.60)

0.453(11.50)

0.350(8.89)

0.051 (1.31)

0.346(8.80)

TALEMA INWK/YR

Part Number

10

Test Conditions:• Polarity and Turns Ratio: ±1%• Inductance: 25mH minimum, line side windings in series @10KHz/100mV• Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100KHz/100mV• Coupling capacitance: IC side windings in series to Line side windings in series @ 10KHz/100mV• Common Mode Choke Inductance: 100KHz/20mV• Test Voltage: 1.5KVrms for 2 Sec. - Line side windings inseries to IC side windings in series

Schematic (Without Choke) Schematics - With ChokeA

ICLine16

1514

13

12

1110 9

1

23

4

5

67

8

BICLine

10

9

11

15

16

14

5

12

4

3

13

6

7

8

1

2

AICLine

16

1514

13

12

11109

1

23

4

5

67

8

MAJ Series • ISDN SO Compact SMD Interface Modules


Suggested Pad Layout

Test Conditions:Polarity and Turns Ratio: ±1%Inductance: 30mH minimum, line side windings in series @ 10KHz/100mVLeakage Inductance: Line side windings in series, IC side windings short circuited@ 100KHz/100mVCoupling Capacitance: IC side windings in series to Line side windingsin series @ 10KHz/100mVCommon Mode Choke Inductance: 100KHz/20mVTest Voltage: 1.5KV for 2 Sec. - Line side windings in series toIC side windings in series

MAJ Compact Module

0.047(1.20)

0.100(2.54)

0.591(15.00)

0.374 (9.50)

0.700 (17.78)

0.307(7.80)

0.354(9.00)

0.020 x 0.12(0.50 x 0.30)

Schematic

Features• Excellent output characteristics ensure compliance with

CCITT.I.430 pulse waveform template when used withrecommended IC pairing

• SMD modules are designed for pick and place compatability• Excellent and consistent balance between windings• Modular design maximizes suppression effectivity and

transmission properties• Full compatibility with all common IC's• Manufactured in ISO 9001:2015 and

ISO 14001:2015 certified Talema facility• Fully RoHS & REACH Compliant and meets lead free

reflow level J-STD-020C• Operating temperature: -40° to 85°C• Storage temperature: -40 to +125°C

(10-06) Communications\MAJ

9541LUdna0591LU,05906NEleveLnoitalusnIcisaBhtiwylpmocseludoMDMStcapmoC

rebmuNtraP LP)niMHm(

snruToitaR

LL)xaMHµ(

I^ CD)Am(

CC)xaMFp(

R UC P)smhO(

R UC S)smhO(

VP)smrV( citamehcS

XXX-A004-JAM 03 :1:1 1:1 5 4 021 7.1 7.1 0051 A

XXX-A304-JAM 03 :1:1 2:2 5 4 021 7.1 4.3 0051 A

XXX-A504-JAM 03 :1:1 5.2:5.2 5 4 021 9.1 4.4 0051 A

3-XXX-A004-JAM 03 :1:1 1:1 5 3 021 7.1 7.1 0051 A

3-XXX-A304-JAM 03 :1:1 2:2 5 3 021 7.1 4.3 0051 A

3-XXX-A504-JAM 03 :1:1 5.2:5.2 5 3 021 9.1 4.4 0051 A

ekohCedoMnommoCxiffuS+N/PcisaB

074-A304-JAM:elpmaxE(LN

)Hµ(R UC

)smhO(

000- ekohCoN

074- 74 5.0

101- 001 7.0

105- 005 5.0

205- 0005 0.2



AICLine

16

1514

13

12

1110 9

1

23

4

5

67

8


0.787 (20.00)

0.551(14.00)

0.044(1.11)

0.472(13.00)

7 x 0.100 (2,54)

TALEMA INWK/YR

Part Number

11

12

C°58+ot°04-erutarepmeTgnitarepO•C°52@snoitacificepSlacirtcelE

traPrebmuN

egakcaPoitaRsnruT

%2±esneS:CI:eniL

LP)Hm(

%01±

LL)Hµ(.xaM

RCD).xaMsmhO(

CI/eniL

RCD).xaMsmhO(

esneSgnidniW

noitalosIegatloV)smrV(

ES T-001P HT:2.3 1:1 0.3 52 08.0/0.5 6.3 0002

S-001PES DMS



Schematic

ICLine

Sense

1

4

2

5

9

7

10

6

SEP Series • SDSL / SHDSL Transformers for Infineon Chipsets

Features• Complies with ANSI and ETSI requirements• Matched to Infineons PEB22622, PEF22623 & PEF24622 chipsets• Very low THD• 2000V minimum isolation• All materials approved to UL94V-0• Excellent quality at competitive price due to high volume production• Manufactured in an ISO 9001:2015 and

ISO 14001:2015 certified Talema facility• Fully RoHS & REACH Compliant and meets lead free reflow level J-STD-020C for SMD

13

Package “T”

SEP Series • SDSL / SHDSL Transformers for Infineon Chipsets


Package “S”


0.394(10.00)

0.547(13.90)

0.098 (2.50)

Ø 0.024(Ø 0.60)

TALEMA INDate CodeSEP100-T

•

0.524(13.30) max.

0.173 (4.40)

0.535(13.60)

0.394(10.00)

0.709(18.00)

0.051(1.30)

0.100(2.54)

0.394(10.0)

0.675(17.15) max.

0.492(12.50) max.

0.028x0.012(0.70x0.30)

0.516(13.11) max

0.531(13.50) max.

TALEMA INDate CodeSEP100-S

• 0.098 (2.50)

0.394(10.0)

14

Dimensions are max. unless otherwise stated:Inches(Millimeters)Pinout spacings are nominal. Pins: 0.026 x 0.018(0.66x0.45)

Mechanical Dimensions & Pinout

LTM-110A • Line Interface 56kbps Modem Transformer

Features• Designed for V.90 applications (56kbps)• Very low distortion• Wide frequency range with flat response• Meets IEC 60950 Supplementry Insulation levels, 1500V min.• Excellent quality at competitive price due to high

volume production• Manufactured in an ISO 9001:2015 and

ISO 14001:2015 certified Talema facility• Fully RoHS & REACH Compliant

C°58+ot°04-erutarepmeTgnitarepO•C°52@snoitacificepSlacirtcelE

retemaraP snoitidnoC lacipyT timiL stinU

esnopseRycneuqerF zH0004-002 5.0± - Bd

ssoLnoitresnI smhO006LR,zH0002 0.1 xam5.1 Bd

ssoLnruteR zH0004-002 22 nim81 Bd

DHT mBd3-,zH051 07- - Bd

DHT mBd01-,zH002 58- - Bd

ecnatsiseRCD gnidniwrep 07 %01± smhO

ecnatcudnI V1,zH0001 0.6 - H

ecnatcudnIegakaeL V1,zH0001 71 - Hm

oitaRsnruT 1:1 %2± -

0.295(7.50)

0.492 (12.50)

0.445(11.30)

0.217±0.012 (5.50±0.3)

TALE

MA

IN LT

M-1

10A

WK/

YR

Equivalent Circuit: (Referenced to Primary @ 1V, 1kHz)

Line Modem

RPRI = 70 Ohms RSEC = 70 Ohms

LP = 6.2H RP = 35k Ohms

LL = 17.5mH

0.650(16.50)

0.650 (16.50)

1 3

6 4

(View fromTop)


Schematic

3 1

4 6

15

THE TALEMA GROUP • Worldwide Toroidal Specialists

PERFORMANCE DATA


LTM-110A • Line Interface 56kbps Modem Transformer

0

5

10

15

20

25

dB

100 1000 10000

Return LossTypical

Frequency Hz

-100

-95

-90

-85

-80

-75

-70

-65

-60

dB

100 1000

Total Harmonic DistortionTypical

Frequency Hz

0

0.5

1

1.5

2

2.5

3

3.5

4

dB

100 1000 10000

Insertion LossTypical

Frequency Hz

Talema manufactures a wide range of transformers for all 1.544 and 2.048Mbbs applications. A full listing of LIU TransceiverIC’s with recommended Talema transformers is listed on the following cross reference chart.

Performance has been proven in the many design-ins of our products in these applications Quality and consistency isguaranteed through 100% testing of the specified parameters for Primary Inductance, Leakage Inductance, Turns Ratio, DCresistance and Interwinding Capacitance This ensures that the Return Loss and Pulse Waveshape requirements of ITU-TG.703 and ANSI T1.102 can be met. Additionally all parts are 100% tested for 1500V minimum isolation.Temperature PerformanceProducts are offered with extended temperature ( -40° to 85°C ) as standard. Required minimum inductance levels aremaintained at the lower temperature limits.

IC - E1 / T1 / PRI / CEPT Transformer Selection Guide

seludoMecafretnIIRP-NDSI/TPEC/1E/1TrofediuGnoitceleSremrofsnarT-CI

rerutcafunaMCI CIrebmuNtraP noitacilppA

rebmuNtraPremrofsnarTamelaT

eloHhguorhTelgniS lauDniP61DMS

timsnarT evieceR sR/xTpihCengoloC 1E-CFH M2S -- -- 230-MJM

cigoLsurriC)latsyrC(

81316 1E021 91-/7-M2SI 02-/51-M2SI 810-MJM81316 1E57 72-/71-M2SI 02-/51-M2SI --77516 1E&1T 91-/7-M2SI 91-M2SI 710-MJM

57516,A47516,A53516,A50316,A40316 1T 12/8-M2SI 91-/12-M2SI 910-MJM57516,A47516,A53516,A50316,A40316 1E57 21-M2SI 91-/7-M2SI 520-MJM57516,A47516,A53516,A50316,A40316 1E021 21-M2SI 91-/7-M2SI 520-MJM

38516,28516 12-/8-M2SI 12-/8-M2SI 310-MJM18516,01316 91-/7-M2SI 02-/51-M2SI 810-MJM18516,01316 tsoH 91-/7-M2SI 91-/7-M2SI 620-MJM18816,08816 12-/8-M2SI 91-/7-M2SI 910-MJM

A48516,48516 3QI 91-/7-M2SI 91-/7-M2SI 710-MJMA48516,48516,38516,28516 5QI 12-/8-M2SI 12-/8-M2SI 310-MJM

mixaM)sallaD(

8412SD,9412SD,5512SD,6912SD 91-/7-M2SI 02-/51-M2SI 810-MJM4512SD,3512SD,2512SD,1512SD 12-/8-M2SI 02-/51-M2SI 910-MJM4512SD,3512SD,2512SD,1512SD 52-/01-M2SI 02-/51-M2SI 820-MJM

95Q/943/843Q/84Q/8412SD V3 91-/7-M2SI 02-/51-M2SI 810-MJM84Q,8412SD V5 52-/01-M2SI 02-/51-M2SI 820-MJM

453Q/45312SD,253Q/25312SD 1E/1T 91-/7-M2SI 02-/51-M2SI 810-MJM455Q/45512SD,255Q/25512SD 1E/1T 12-/8-M2SI 02/51-M2SI 910-MJM455Q/45512SD,255Q/25512SD 1E/1T 52-/01-M2SI 02-/51-M2SI 820-MJM

82562SD,85412SD,55412SD,3052SD,20562SD 7-M2SI 51-M2SI 810-MJM

raxE

7995TRX,7985TRX,4985TRX,19L95TRX,A3865TRX 91-/6-M2SI 91-/6-M2SI 710-MJM4975TRX,3975TRX 21-M2SI 02-/42-M2SI 520-MJM

02D28,42L28,72L18TRX 52-M2SI 91-/6-M2SI 820-MJM83L38TRX,43L38TRX,03L38TRX 91-/6-M2SI 91-/6-M2SI 810-MJM

83L68TRX,43L68TRX,23L68TRX,03L68TRX 6-M2SI 42-M2SI 810-MJM02D28,8827TRX,4865T 52-M2SI 91-/7-M2SI 820-MJM

TDI

8502V28,4502V28,L8402V28,8402V28,4402V28 6-M2SI 6-M2SI 340-MJME8402V28,E4402V28,E2402V28,E1402V28 6-M2SI 42-M2SI 810-MJM

8802V28,4802V28,2802V28,1802V28 6-M2SI 42-M2SI 810-MJM8822P28,4822P28,2822P28,1822P28 6-M2SI 42-M2SI 810-MJM

noenifnI)snemeiS(

5522BEP,4522BEP 1J/1T/1E -- -- 010-MJM5522BEP,4522BEP 1J/1T/1E -- -- 120-MJM

6522BEP,45522BEP,40522BEP V3.3 -- -- 220-MJM

16


17

Notes:1. Dallas IC’s use either a 1:1.15 or a 1:1.36 ratio transformer depending on the application. Consult the Dallas application notes or contactTalema.2. Consult Siemens Application Note 12.90 (‘Just a Single Line Transformer Type for all IPAT (PEB2235) Applications’) for calculation of resistorvalues.3. The Dual Transformer types MDM-010 and MDM-021 are electrically identical but have different schematics. Either part may be used withthe PEB2254 and PEB2255.4. See Level One Application Note 118 (‘Transformer Specifications for Level One Transceiver Applications’) for further details on the choiceof transformer ratios.

seludoMecafretnIIRP-NDSI/TPEC/1E/1TrofediuGnoitceleSremrofsnarT-CI

CIrerutcafunaM

CIrebmuNtraP noitacilppA

rebmuNtraPremrofsnarTamelaTeloHhguorhTelgniS DMSlauDniP61

timsnarT evieceR sR/xT

letnI)enOleveL(

103XL,003TXL 91-/7-M2SI 91-/7-M2SI 710-MJM703TXL,503TXL,403TXL 1E/1T 91-/7-M2SI 91-/7-M2SI 710-MJM703TXL,503TXL,403TXL 1T 12-/8-M2SI 91-/7-M2SI 910-MJM703TXL,503TXL,403TXL 1E021,57 21-M2SI 91-/7-M2SI 520-MJM703TXL,503TXL,403TXL 4D,1-XSD 11-M2SI 7-M2SI 610-MJM813TXL,713TXL,013TXL 91-/7-M2SI 02-/51-M2SI 810-MJM513TXL,313TXL,213TXL 62-M2SI 02-/51-M2SI --

133TXL 1E/1T 91-/7-M2SI 91-/7-M2SI 810-MJM233TXL,133TXL 11-M2SI 7-M2SI 610-MJM233TXL,133TXL 12-/8-M2SI 91-/7-M2SI 910-MJM233TXL,133TXL 91-/7-M2SI 91-/7-M2SI 710-MJM533TXL,433TXL 1E/1T 91-/7-M2SI 91-/7-M2SI 710-MJM533TXL,433TXL 1E57/021 52-/01-M2SI 91-/7-M2SI 820-MJM533TXL,433TXL 1E57 21-M2SI 91-/7-M2SI 520-MJM533TXL,433TXL 61-M2SI 51-M2SI 620-MJM

633TXL 7-M2SI 02-M2SI 420-MJM953TXL,153TXL,053TXL 1E/1T 91-/7-M2SI 02-/51-M2SI 810-MJM

153TXL,053TXL 11-M2SI 7-M2SI 910-MJM153TXL,053TXL 1E021 11-M2SI 7-M2SI 610-MJM

363TXL,263TXL,163TXL,063TXL 1E/1T 91-/7-M2SI 02-/51-M2SI 810-MJM363TXL,263TXL,163TXL,063TXL 12-/8-M2SI 91/7-M2SI 910-MJM

163TXL,063TXL 11-M2SI 7-M2SI 610-MJM883TXL,683TXL,483TXL,183TXL,083TXL 1E/1T 91-/7-M2SI 02-/51-M2SI 810-MJM883TXL,683TXL,483TXL,183TXL,083TXL 11-M2SI 7-M2SI 610-MJM

8013TXL,4013TXL 02-/51-M2SI 02-/51-M2SI 710-MJM8013TXL,4013TXL 840-MJM

eregA)tnecuL(

A0927T,8827T 1E/TPEC 52-/01-M2SI 91-/6-M2SI 820-MJMA9827T 1SD 12-/32-M2SI 91-/7-M2SI 910-MJM

8967T,0967T,8867T,0367T TPEC 52-/01-M2SI 52-/01-M2SI8967T,0967T,8867T,0367T 1SD 12-/32-M2SI 12-/32-M2SI 310-MJM

7967T,3967T TPEC 830-MJM1C40UILT 1SD 12-/32-M2SI 12-/32-M2SI 310-MJM1C40UILT TPEC 52-/01-M2SI 52-/01-M2SI

arreiS-CMP4134MP,1436MP,1434MP 52-M2SI 91-/7-M2SI 820-MJM

5234MP,3234MP,9134MP,8134MP 91-/7-M2SI 91-/7-M2SI 710-MJM4534MP,1534MP TEMOC 830-MJM

deepsdniM)tnaxenoC(

0158TB 1E/1T 21-M2SI 7-M2SI 130-MJM0158TB 1E/1T 21-M2SI 7-M2SI 520-MJM

6738TB,5738TB,0738TB rewoPwoL 8-M2SI 51-M2SI 910-MJM6738TB,5738TB,0738TB IRretteB 52-M2SI 51-M2SI 820-MJM

knilraZ)letiM(

6709TM,1709TM 830-MJM6709TM,5709TM 220-MJM5709TM,4709TM 7-M2SI 42-M2SI 810-MJM


Electrical Specifications @ 25°C

sremrofsnarTlauD-seireSMJM

traPrebmuN

I-remrofsnarT II-remrofsnarT

citamehcSsnruToitaR

%5-/+

LP)niMHm(

R UC )smhO( .irPsniP

.ceSsniP

snruToitaR

%5-/+

LP)niMHm(

R UC )smhO( .irPsniP

.ceSsniP.irP .ceS .irP .ceS

010-MJM :tc1 tc14.1 2.1 14.0 85.0 41-51-61 3-2-1 :tc1 tc14.1 2.1 14.0 85.0 9-01-11 8-7-6 A

310-MJM :tc1 tc51.1 2.1 93.0 44.0 3-2-1 41-51-61 :tc1 tc51.1 2.1 93.0 44.0 8-7-6 9-01-11 A

610-MJM :tc1 tc2 2.1 93.0 77.0 8-7-6 9-01-11 :tc1 tc3.2 2.1 93.0 88.0 41-51-61 3-2-1 A

710-MJM :tc1 tc2 2.1 93.0 77.0 41-51-61 3-2-1 :tc1 tc2 2.1 93.0 77.0 8-7-6 9-01-11 A

810-MJM :tc1 tc1 2.1 93.0 83.0 41-51-61 3-2-1 :tc1 tc2 2.1 93.0 77.0 8-7-6 9-01-11 A

910-MJM :1 tc51.1 2.1 93.0 44.0 41--61 3-2-1 :tc1 tc2 2.1 93.0 77.0 8-7-6 9-01-11 B

120-MJM :tc1 tc14.1 2.1 14.0 85.0 3-2-1 41-51-61 :tc1 tc14.1 2.1 14.0 85.0 9-01-11 8-7-6 A

220-MJM :tc1 tc1 0.1 93.0 93.0 9-01-11 8-7-6 tc1 tc4.2: 0.1 14.0 09.0 3-2-1 41-51-61 A

320-MJM :1 tc1 2.1 93.0 93.0 41-61 3-2-1 :1 tc1 2.1 93.0 93.0 8-6 9-01-11 C

420-MJM :tc1 tc1 0.1 93.0 93.0 8-7-6 9-01-11 :tc1 tc76.1 0.1 93.0 66.0 41-51-61 3-2-1 A

520-MJM :1 62.1/1 2.1 93.0 84.0 41-61 3-2-1 :tc1 tc2 2.1 93.0 77.0 8-7-6 9-01-11 B

620-MJM :tc1 tc1 2.1 93.0 93.0 41-51-61 3-2-1 :tc1 tc5.1 2.1 93.0 85.0 8-7-6 9-01-11 A

720-MJM :1 tc2 6.1 14.0 38.0 41-61 3-2-1 :2 1 6.1 14.0 12.0 8-6 9-11 D

820-MJM :tc1 tc2 2.1 93.0 77.0 41-51-61 3-2-1 1 tc63.1: 2.1 93.0 25.0 8-6 9-01-11 E

920-MJM :1 tc24.2 2.1 93.0 49.0 41-61 3-2-1 1 tc24.2: 2.1 93.0 49.0 8-6 9-01-11 C

030-MJM :2 1:1 2.1 64.0 62.0 41-61 4-3,2-1 :2 1:1 2.1 64.0 62.0 9-11 8-7,6-5 F

130-MJM tc2 62.1/1: 5.1 14.0 25.0 3-2-1 41-51-61 tc2 62.1/1: 5.1 14.0 25.0 9--01-11 8-7-6 A

230-MJM :1 24.2 2.1 93.0 49.0 41-61 3-2-1 :1 tc1 2.1 93.0 93.0 8-6 9-01-11 C

*330-MJM :1 4.2/9.1 0.1 14.0 49.0 41-51-61 3-2-1 :97.0 1/9.1 0.1 04.0 57.0 8-7-6 9-01-11 A

430-MJM tc1 tc5.1: 5.1 14.0 26.0 3-2-1 41-51-61 tc1 tc5.1: 5.1 14.0 26.0 8-7-6 9-01-11 A

530-MJM :tc1 tc1 2.1 93.0 93.0 8-7-6 9-01-11 :tc1 tc63.1 2.1 93.0 25.0 3-2-1 41-51-61 A

630-MJM sc2 2/75.1: 5.1 14.0 28.0 2-1 -- sc2 2/75.1: 5.1 14.0 28.0 6-5 -- G

730-MJM tc1 tc1: 2.1 93.0 93.0 41-51-61 3-2-1 tc1 tc63.1: 2.1 93.0 35.0 8-7-6 9-01-11 A

830-MJM :tc1 tc24.2 2.1 93.0 49.0 3-2-1 41-51-61 :tc1 tc24.2 2.1 93.0 49.0 8-7-6 9-01-11 A

930-MJM :1 4.2/2 0.1 93.0 49.0 3-1 41-51-61 1 1/97.0: 0.1 93.0 93.0 8-6 9-01-11 H

040-MJM :tc1 tc4.2 2.1 93.0 49.0 3-2-1 41-51-61 tc1 tc4.2: 2.1 93.0 49.0 8-7-6 9-01-11 A

140-MJM 1 tc2: 2.1 93.0 77.0 3-1 41-51-61 1 sc2: 2.1 93.0 77.0 9-11 8-7,6-5 J

240-MJM 1 tc63.1: 2.1 93.0 35.0 41-61 3-2-1 1 tc2: 2.1 93.0 77.0 8-6 9-01-11 C

340-MJM tc1 tc2: 2.1 93.0 77.0 3-2-1 41-51-61 tc1 tc2: 2.1 93.0 77.0 8-7-6 9-01-11 A

440-MJM tc1 tc2: 2.1 93.0 77.0 3-2-1 41-51-61 1 1: 2.1 93.0 93.0 8-6 9-11 K

540-MJM tc1 tc2: 2.1 93.0 77.0 3-2-1 41-51-61 tc1 tc24.2: 2.1 93.0 59.0 8-7-6 9-01-11 A

640-MJM tc1 tc1: 2.1 93.0 93.0 3-2-1 41-51-61 tc1 tc1: 2.1 93.0 93.0 8-7-6 9-01-11 A

740-MJM tc1 tc62.1: 2.1 93.0 05.0 3-2-1 41-51-61 tc1 tc62.1: 2.1 93.0 05.0 8-7-6 9-01-11 A

840-MJM tc1 8.0:1: 2.1 93.0 93.0 41-51-61 4-3,2-1 tc1 8.0:1: 2.1 93.0 93.0 9-01-11 8-7,6-5 G

940-MJM tc1 2:85.1: 2.1 93.0 08.0 4-3-2 31-41,51-61 1 2:56.1: 2.1 93.0 08.0 7-6 9-01,11-21 L

050-MJM tc1 1:1: 2.1 93.0 93.0 41-51-61 4-3,2-1 tc1 1:1: 2.1 93.0 93.0 9-01-11 8-7,6-5 G

150-MJM tc4.2:tc1 2.1 93.0 49.0 3-2-1 41-51-61 tc1:tc1 2.1 93.0 93.0 8-7-6 9-01-11 A

1:97.0=01-11:8-6sniP,9.1:97.0=11-9:8-6sniP;4.2:1=3-1:41-61sniP,9.1:1=2-1:41-61sniP:oitaRsnruT330-MJM*

MJM Series • E1 / T1 / PRI / CEPT Dual Transformer Modules

Features• SMD design ideal for pick and place compatability while

providing unrivaled coplanarity

• Controlled parameters ensure full compliance with

ITU-T G.703 when matched with recommended IC

• Ideal for all 1.544 and 2.048 Mbs interface applications

• Manufactured in an ISO 9001:2015 and

ISO 14001:2015 certified Talema facility

• Extended operating temperature: -40° to +85°C

• Fully RoHS & REACH Compliant and meets

lead free reflow level J-STD-020C • Test Frequency: No load Inductance @ 10KHz/20mV

• Minimum isolation voltage between Pri to Sec 1500Vrms

18


19

MJM Dimensions



MJM Series • E1/T1/ PRI/CEPT Dual Transformer Modules

0.378(9.60)

0.504(12.80)

0.077 (1.96)

0.346(8.80)

TALEMA INW K/YR

Part Number

0.350(8.89)

Schematics

0.189(4.80)

0.236(6.00) 0.016 x 0.016

(0.40 x 0.40)


0.079(2.00)

0.394(10.60)

0.028(0.70)

0.050(1.27)

0.350(8.89)

Suggested PadLayout

B1

2

36

7

8

16

1411

10

9

E1

2

36

8

16

15

1411

10

9

D1

2

36

8

16

1411

9

A1

2

36

7

8

16

15

1411

10

9

C1

2

36

8

16

1411

10

9

H1

36

8

16

15

1411

10

9

J1

3567

8

16

15

1411

9

K1

2

36

8

16

15

1411

9

L2

3

46

7

16151413121110 9

G16

15

1411

10

9

12345678

F12345678

16

1411

9

20

Features• Industry standard through-hole footprints• Wide range compatible with all common transceiver IC's• Controlled parameters ensure full compliance with ITU-T G.703 when matched with recommended IC• Ideal for all 1.544 and 2.048 Mbs interface applications• Manufactured in an ISO 9001:2015 and

ISO 14001:2015 certified Talema facility• Extended operating temperature: -40° to +85°C• Fully RoHS & REACH Compliant

Note: Unused pins not provided

IS2M Series • E1/T1/ PRI/CEPT Single Transformers

sremrofsnarTseireSM2SI

rebmuNtraP oitaRsnruT%5±

LCO).niMHm(

LL).xaMHµ(

RCDirP

)smhO(

RCD)smhO(

VP)smrV(

yramirPsniP citamehcS

6-M2SI :tc1 tc2 2.1 5.0 7.0 2.1 0051 3-1 A

7-M2SI :1 tc2 2.1 5.0 7.0 2.1 0051 4-6 B

8-M2SI :1 tc51.1 5.1 6.0 7.0 9.0 0051 4-6 B

01-M2SI :1 tc63.1 2.1 8.0 5.0 8.0 0051 3-1 C

11-M2SI :1 tc3.2 2.1 8.0 7.0 4.1 0051 3-1 C

21-M2SI 1 62.1/1: 5.1 5.0 7.0 9.0 0051 4-6 B

51-M2SI :tc1 1 2.1 5.0 7.0 7.0 0051 3-1 D

61-M2SI :1 tc5.1 2.1 6.0 7.0 0.1 0051 4-6 B

71-M2SI :1 35.1 2.1 8.0 5.0 0.1 0051 4-3 F

81-M2SI :1 581.1 2.1 5.0 7.0 8.0 0051 4-3 F

91-M2SI :tc1 tc2 2.1 0.1 0.1 0.2 0051 4-6 E

02-M2SI :tc1 tc1 2.1 0.1 0.1 0.1 0051 3-1 A

12-M2SI :1 tc51.1 5.1 0.1 0.1 0.1 0051 4-6 B

32-M2SI :1 tc41.1 2.1 0.1 7.0 8.0 0051 3-1 C

42-M2SI :1 1 2.1 5.0 7.0 7.0 0051 6-1 F

52-M2SI :1 63.1 2.1 8.0 7.0 9.0 0051 4-3 F

62-M2SI :tc1 tc3 2.1 8.0 7.0 1.2 0051 3-1 A

72-M2SI :1 tc385.1 2.1 6.0 7.0 0.1 0051 4-6 B


1 6

2 5

3 4

• Test Voltage: 1.5KVrms - Line side winding in series to IC side winding in seriess


IS2M Series

F

1

6

ICLine3

4

E

32

1

ICLine4

5

6

A

65

4

ICLine1

2

3

B1

2

3

ICLine6

4

C

6

5

4

ICLine1

3

SchematicD

6

4

ICLine1

2

3

0.400(10.16)

0.350(8.89)

0.500(12.70)

0.250(6.35)

0.150(3.81)

0.200(5.08)

0.02x 0.02(0.50 x 0.50)

0.018 x 0.026 (0.45 x 0.66)

Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise

21

IC Selection Guide for 10Base-T Isolation Transformer Modules

Talema manufactures a broad range of Isolation Transformer Modules for 10Base-T, 100Base-T, 1000Base-T, AUI and ATMapplications. Many of the modules include a common mode choke for noise attenuation matched to the specified trans-ceiver and are designed for extended temperature range (-40°C to +85°C) applications.


rerutcafunaMCI rebmuNtraPCI

oitaRsnruT rebmuNtraPamelaT

timsnarT evieceRerutainiM

troPelgniS0.6x6.9x8.21

DMA

489C97MA589C97MA889C97MA989C97MA

tc1:tc1 tc1:tc1J-1A001-MMTJ-1A001-MCMTJ-1A002-MCMT

cigoLsurriC)latsyrC(

,QI/QC-A0098SC5MC-4098SC

0298SCtc414.1:tc1 tc1:tc1

J-2A002-MCMTJ-2A041-MCMT

J-2A041-MMT

3QI/3QC-A0098SC3MC-4098SC

tc5.2:tc1 1:1J-4A002-MMTJ-4A002-MCMT

ustijuF

15968BM16968BM46968BM

B56968BM

tc414.1:tc1 tc1:tc1J-2A002-MCMTJ-2B011-MCMT

J-2A041-MMT

letnI)enOleveL(

A109TXL,109TXL519,419,709TXL449,719,619TXL

tc414.1:tc1 tc1:tc1J-2A002-MCMTJ-2B011-MCMT

J-2A041-MMT

509TXL809TXL

tc1 : tc2 tc1:tc1J-3A041-MCMTJ-3A021-MCMT

raeniLµ3562LM,2562LM8564LM,2564LM

tc1:tc2 tc1:tc1J-6A041-MCMT

J-6A001-MMT

lanoitaNrotcudnoc-imeS

35938PD70938PD

A42938PDtc2:tc1 tc1:tc1

J-3A041-MCMTJ-3A021-MCMTJ-5A002-MCMT

ketlaeR1038LTR

42C08tc1:tc2 tc1:tc1

J-6A041-MCMTJ-6A001-MMT

stnemurtsnIsaxeT

A001ETENT tc414.1:tc1 tc1:tc1

J-2A002-MCMTJ-2B011-MCMT

J-2A041-MMTJ-2A041-MCMT

4002ETENT tc414.1:tc1 tc1:tc1J-2A002-MCMTJ-2B011-MCMT

J-2A041-MMT

8002ETENT tc1:tc1 1:1J-1A001-MMTJ-1A001-MCMTJ-1A002-MCMT

22

IC Selection Guide for 10/100 Base-T Isolation Transformer Modules


CIrerutcafunaM

rebmuNtraPCI

oitaRsnruT trapamelaTrebmuN



ketMDA604TEL tc1:tc1 tc1:tc1 J-A003-MET

,389NA,3159MDA,1159MDA589NA

tc1:tc1 tc1:tc1 J-D003-MET

DMA

478C97MA tc1:tc1 tc1:tc1J-A003-MET

J-K003-MET)PL1-YHPteN(478c97ma tc1:tc52.1 1:1 J-D203-METtsaF-tenCP(179C97MA tc1:tc1 1:1 J-A003-MET

)IIITSAF-tenCP(379C97MA tc14.1:tc1 tc1:tc1 J-B003-MET779C97MA,679C97MA tc1:tc1 tc1:tc1 J-A003-MET

mocdaorB ,1225MCB,0225MCB,1025MCB)lauD(2195MCB,2225MCB

tc1:tc1 tc1:tc1J-A003-METJ-D003-MET

mocdaorB)amitlA(

101HA tc1:tc1 tc1:tc1 J-A003-MET

mocdaorB)mocivaD(

,1119MD,2019MD,1019MD,1819MD,1619MD,1319MD

1069MD,1039MDtc1:tc1 tc1:tc1

J-A003-METJ-H003-MET

cigoLsurriC)lytsyrC(

2598SC tc1:tc1 tc1:tc1 J-A003-MET

SCI 1981SCI,0981SCI3981SCI,2981SCI

tc1:tc1 tc1:tc1J-H003-METJ-D003-MET

letnI 85528S,55528S26528S,95528S

tc1:tc1 tc1:tc1 J-A003-MET

letnI)enOleveL(

,379TXL,279TXL,179TXL,A079TXL,2679TXL,1679TXL

,)IIMRlatcO/xeH(1879TXL)IIMSlatcO/xeH(2879TXL

tc1:tc1 tc1:tc1J-A003-METJ-D003-MET

SIS 069SiS tc1:tc1 tc1:tc1J-A003-METJ-B003-METJ-D003-MET

CSMS ,381C38NAL,081C38NAL091C38NAL

tc1:tc1 tc1:tc1J-A003-METJ-B003-METJ-D003-MET

ecnadnuSygolonhceT

)YHPDMPXTB001(001TSaideMtenrehtEtsaF(101TS

)retrevnoCtc1:tc1 tc1:tc1 J-A003-MET

KDT 0212Q87CST tc1:tc1 tc1:tc1 J-A003-MET

saxeTstnemurtsnI 4012ETENT,1012ETENT tc1:tc1 tc1:tc1

J-A003-METJ-D003-MET

seludoMremrofsnarTecafretnIkrowteNMTA

lanoitaN551MTA

32238 tc1:tc1 tc1:tc1 J-H003-MET

raeniLµ 4766LM tc1:tc1 tc1:tc1 J-A003-METCMP

arreiS 0535MP tc1:tc1 tc1:tc1 J-H003-METJ-A003-MET

23

IC Selection Guide for 10/100 Base-T Isolation Transformer Modules


rerutcafunaMCI rebmuNtraPCI

oitaRsnruT rebmuNtrapamelaT



nidneK

)YHPlatcOV5.2(8278SK)BUHdauQV3.3(5378SK

)IIMYHPV3.3(7378SK)YHPV5(1678SK

)hctiwStroP,V5.2(5998SK

tc1:tc1 tc1:tc1J-A003-METJ-D003-METJ-H003-MET

E5998SK tc1:tc1 tc1:tc1 J-D003-MET

tnecuL)elbanE(

,40X3CUL,41XWCUL

,42X3CUL15X3CUL


PIoV-)V3.3(2038T,)V5(1038T,2166UL tc1:tc1 tc1:tc1 J-A003-MET,08ET-TF13X3UL,08J-TF13X3UL,821ES-TF23X3UL,46T-T13X3UL

)xeH(RTF63X3UL,061J-TF43X3ULtc1:tc1 tc1:tc1 J-A003-MET

xinorcaM 517XMtc1:tc1 tc1:tc1

J-A003-METJ-B003-MET

llevraM0506E88,1803E88,1603E88 tc1:tc1 tc1:tc1 J-D003-MET

2506E88,1506E88 tc1:tc1 tc1:tc1 J-D003-MET

raeniLorciM

1566LM tc1:tc1 tc1:tc1 J-H003-MET3766LM tc1:tc1 tc1:tc1 J-H003-MET

4966LM,2966LM8966LM,7966LM

tc1:tc21:tc2

tc1:1:1J-G403-METJ-J403-MET

letiM)ysselP(

459KWN,939KWN,739KWN tc1:tc1 tc1:tc1 J-A003-MET

nosyM 179DTM tc1:tc1 tc1:tc1J-A003-METJ-B003-MET

mocitsyM 011YHPitsyM tc1:tc1 tc1:tc1J-B003-METJ-D003-MET

lanoitaNrotcudnocimeS

,)retyhPcaM(51838PD,)retyhP(34838PD)retyhPsD(A64838PD


ketlaeR

1028LTR,9318LTR tc1:tc1 tc1:tc1 J-A003-MET

B9318LTR tc1:tc1 tc1:tc1J-A003-METJ-B003-MET

)V3.3(C9318LTR tc1:tc1 tc1:tc1 J-B003-METB0018LTR,S5038LTR tc1:tc1 tc1:tc1 J-A003-MET

0518LTR tc1:tc1 tc1:tc1 J-D003-MET

ISL)QEES(

12208,02208 1:tc2tc1:tc2 tc1:tc1 J-F403-MET

J-D403-MET

52208,32208 tc1:tc1 tc1:tc1J-B003-METJ-D003-MET

24

Features• Low profile and light weight 10 Base-T modules facilitate pick

and place compatability and speed of placement• Meets requirements of IEEE 802.3• Consistent and reliable coplanarity• Excellent quality at extremely competitive price due to high volume production• Manufactured in an ISO 9001:2015 and

ISO 14001:2015 certified Talema facility• Fully RoHS & REACH Compliant and

meets lead free reflow level J-STD-020C

THE TALEMA GROUP • World Wide Toroidal Specialists

TMM Series • 10 Base-T Single Port SMD Transformer Modules

Applications:Talema 10Base-T transformer modules contain transmit and receive isolation transformers to maintain consistant waveshape and suppression of common mode noise while providing equipment isolation per IEEE 802.3. High impedancecommon mode quad chokes for additional EMI suppression have been added on some models as required for FCC andCISPR 22 Class B certification.

See next page for electrical specifications for modules with common mode chokesfor EMI noise suppression and for dimensions and Schematics with choke.

Schematics without Choke

seludoMremrofsnarTDMStroPelgniST-esaB01•seireSMMT

rebmuNtraPoitaRsnruT

%5±LCO.irP)niMHµ(

LL)xaMHµ(

C W/W)xaMFp(

RCD).xaMsmhO(

VP)smrV(

citamehcS41-61:3-1 9-11:8-6 ceS/irP ceS/irP 3-1 41-61 8-6 9-11

J-1A001-MMT tc1:tc1 tc1:tc1 001 52.0 9 03.0 03.0 03.0 03.0 0051 AJ-6A001-MMT tc1:tc2 tc1:tc1 001 52.0 21 06.0 03.0 03.0 03.0 0051 AJ-3A211-MMT tc1:tc1 tc2:tc1 211 03.0 8 03.0 03.0 03.0 06.0 0051 AJ-2A041-MMT tc1:tc1 tc414.1:tc1 041 02.0 21 03.0 03.0 03.0 54.0 0051 AJ-3A041-MMT tc1:tc1 tc2:tc1 52/041 03.0 21 03.0 03.0 03.0 54.0 0051 AJ-6A051-MMT tc1:tc2 tc1:tc1 051 02.0 21 06.0 03.0 03.0 03.0 0051 AJ-1A002-MMT tc1:tc1 tc1:tc1 002 02.0 01 03.0 03.0 03.0 03.0 0051 AJ-2A002-MMT tc1:tc1 tc414.1:tc1 002 05.0 51 03.0 03.0 03.0 54.0 0051 AJ-4A002-MMT tc1:tc1 tc5.2:tc1 53/002 04.0 51 03.0 03.0 03.0 08.0 0051 AJ-5A002-MMT tc2:tc1 tc1:tc1 002/05 02.0 21 03.0 06.0 03.0 03.0 0051 A

J-1B041-MMTgnidniW.ceS:gnidniW.irP

041 02.0 21sgnidniW.irP sgnidniW.ceS

0051 B)x4(1:1 03.0 03.0

J-2B041-MMT )x4(14.1:1 041 02.0 21 14.0 06.0 0051 B

A B

1

2 3

4 5

6 7

8

16

15 14

13 12

11 10

9

16

15

1411

10

9

1

2

36

7

8

Quality and consistency are guaranteed through 100% testing of the specified parameters for primary inductance, leakageinductance, turns ratio, DC resistance and interwinding capacitance.This ensures that the return loss and pulse wave shaperequirements can be fully maintained. Additionally, all parts are tested for 1500V minimum isolation.

Electrical Specifications @ 25°CMinimum isolation voltage: 1500 VrmsOperating Temperature Range: -40°C to +85°CStorage Temperature: -40°C to +125°C

Test Frequency:Inductance, Interwinding Capacitance and LeakageInductance measured @ 100KHz/20mV


Dimensions


%5±LCO.irP)niMHµ(

LL)xaMHµ(

C W/W)xaMFp(

RCD).xaMsmhO(

VP)smrV(

citamehcS41-61:3-1 9-11:8-6 ceS/irP ceS/irP 3-1 41-61 8-6 9-11

J-1A001-MCMT tc1:tc1 tc1:tc1 001 03.0 8 03.0 03.0 03.0 03.0 0051 A

J-2B011-MCMT tc1:tc1 tc414.1:tc1 011 04.0 51 03.0 03.0 03.0 09.0 0051 B

J-3B211-MCMT tc1:tc1 tc2:tc1 211 03.0 8 04.0 04.0 04.0 01.1 0051 B

J-3A021-MCMT tc1:tc1 tc2:tc1 02/021 04.0 9 09.0 09.0 09.0 09.0 0051 A

J-2A041-MCMT tc1:tc1 tc414.1:tc1 041 04.0 02 04.0 04.0 04.0 04.0 0051 A






J-4A002-MCMT tc1:tc1 tc5.2.1:tc1 002 5.0 51 03.0 03.0 03.0 50.1 0051 A



TMCM Series • 10 Base-T Transformers with Common Mode Choke for EMI Suppression


Schematics with Choke

B 1

2

3

6

7

8

16

15

14

11

10

912

13

A

1

2

3

6

7

8

16

15

14

11

10

9

Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwiseSurface coplanarity will be 0.004 (0.01) maximum


0.079(2.00)

0.394(10.60)

0.028(0.70)

0.050(1.27)

0.350(8.89)

SuggestedPad Layout

Miniature Module - TMM & TMCM

0.378(9.60)

0.504(12.80)

0.350(8.89)

0.077(1.955)

0.346(8.80)

TALEMA INWK/YR

Part Number

0.189(4.80)

0.236(6.00) 0.016 x 0.016

(0.40 x 0.40)

25

26

TEM Series • 10/100 Base-T Single Port Transformer Modules

seludoMremrofsnarTnoitalosItroPelgniST-esaB001/01-seireSMET


)ceS:irP(noitresnI

ssoL)xaMBd(

ssoLnruteR)mhO001@niMBd(

nommoCotlaitnereffiDnoitcejeRedoM

)niMBd(klatssorC)pyTBd( citamehcS

xT xR zHM001-1.0 zHM03-1 zHM04 zHM06 zHM08 zHM03 zHM06 zHM001 zHM03 zHM06 zHM001

J-A003-MET tc1:tc1 tc1:tc1 0.1- 02- 02- 81- 41- 24- 63- 33- 05- 04- 04- A

J-1B&J-B003-MET tc1:tc1 tc1:tc1 0.1- 22- 02- 81- 21- 24- 83- 23- 05- 04- 04- B

J-D003-MET tc1:tc1 tc1:tc1 0.1- 22- 02- 81- 21- 54- 04- 53- 05- 04- 04- D

J-D403-MET tc1:tc2 tc1:tc1 1.1- 02- 02- 41- 5.11- 24- 73- 33- 54- 04- 53- D

J-D503-MET tc1:tc98.1 tc1:tc1 1.1- 81- 61- 41- 21- 03- 03- 03- 53- 53- 53- D

J-E003-MET tc1:tc1 tc1:tc1 0.1- 81- 61- 41- 21- 24- 73- 23- 54- 04- 53- E

J-F403-MET 1:tc2 tc1:tc1 0.1- 61- 61- 61- 21- 53- 53- 23- 04- 04- 53- F

J-G403-MET tc1:tc2 tc1:1:1 0.1- 61- 61- 61- 21- 53- 53- 23- 04- 04- 53- G

J-1H&J-H003-MET tc1:tc1 tc1:tc1 0.1- 02- 81- 81- 41- 54- 04- 53- 54- 04- 53- H

J-J403-MET 1:tc2 tc1:1:1 0.1- 61- 61- 61- 21- 53- 53- 23- 04- 04- 53- J

J-1K&J-K003-MET 1:tc1 tc1:tc1 0.1- 61- 4.31- 5.11- 01- 54- 04- 53- 04- 83- 53- K

J-L003-MET tc1:tc1 tc1:tc1 9.0- 81- 41- 21- 11- 04- 53- 03- 54- 54- 73- L

J-M003-MET tc1:tc1 tc1:tc1 0.1- 02- 71- 71- 41- 04- 04- 04- 04- 04- 04- M

J-N003-MET tc1:tc1 tc1:tc1 0.1- 02- 71- 71- 41- 04- 04- 04- 04- 04- 04- N

J-P003-MET tc1:tc1 tc1:tc1 1.1- 81- 61- 41- 21- 24- 73- 53- 04- 04- 53- P

Applications:Talema 10/100Base-T transformer modules contain transmit and receive isolation transformers to maintain consistent waveshape and suppression of common mode noise while providing equipment isolation per IEEE 802.3. High impedancecommon mode quad chokes for additional EMI suppression have been added on some models as required for FCC andCISPR 22 Class B certification.

Quality and consistency is guaranteed through 100% testing of the specified parameters for primary inductance, leakageinductance, turns ratio, DC resistance and interwinding capacitance.This ensures that the return loss and pulse wave shaperequirements can be fully maintained. Additionally, all parts are tested for 1500V minimum isolation.

TEM Miniature Module Suggested Pad layout

0.079(2.00)

0.394(10.60)

0.028(0.70)

0.050(1.27)

0.350(8.89)

Features• Low profile and light weight 10/100 BaseT modules facilitate

pick and place compatability and speed of placement• Meets requirements of IEEE 802.3u and ANSIX3.263• Consistent and reliable coplanarity• Excellent quality at extremely competitive price due to high

volume production• Manufactured in an ISO 9001:2015

ISO 14001:2015 certified Talema facility• Fully RoHS & REACH Compliant and meets

Lead free reflow level J-STD-020C Minimum isolation voltage: 1500 VrmsOperating Temperature Range: -40°C to +85°CStorage Temperature: -40°C to +125°C

Electrical Specifications @ 25°CInductance: 350µH minimum @ 100KHz/100mV, 8mALeakage Inductance: 0.4µH @ 1MHzCW/W: 15pF typical

Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwiseSurface Coplanarity will be 0.004 (0.10)



0.189(4.80)

0.236(6.00) 0.016 x 0.016

(0.40 x 0.40)

0.378(9.60)

0.350(8.89)

0.077 (1.96)

0.346(8.80)

TALEMA INWK/YR

Part Number

0.504(12.80)

27


Schematics • TEM Series 10/100Base-T Single Port SMD Transformer Modules

“C”

TRANSMIT

RECEIVE

1

3

2

16

14

15

7

5

6

10

12

11

“D1”TRANSMIT

RECEIVE

1

2

3

6

7

8

16

15

14

11

10

9

TRANSMIT

RECEIVE

1

2

3

6

7

8

16

15

14

11

10

9

“E”

“D”TRANSMIT

RECEIVE

1

2

3

6

7

8

16

15

14

11

10

9

“B”

TRANSMIT

RECEIVE

1

2

3

16

14

15

7

5

6

10

12

11

TRANSMIT

RECEIVE 1

3

2

6

7

8

16

14

15

9

10

“F”

TRANSMIT

RECEIVE

1

2

3

16

14

15

7

5

6

10

12

11

“A”

“B1”

TRANSMIT

RECEIVE

1

2

3

16

14

15

7

5

6

10

12

11


28

Schematics • TEM Series 10/100Base-T Single Port SMD Transformer Modules


RECEIVE

1

23

4

6

7

8

16

14

15

10

11

9

TRANSMIT

“G”

10 Base-T

100 Base-TX

TRANSMIT

RECEIVE

1

(4*) 3

2

16

(13*)14

15

8

6

7

9

11

10

“H” & “H1*

RECEIVE

16

1513

12

1

2

3

11

10

9

7

8

TRANSMIT

“J”

10 Base-T

100 Base-TX

“L”

TRANSMIT

RECEIVE

1

2

3

7

6

8

16

14

15

10

11

9

TRANSMIT

RECEIVE

1

2

3

6

8

7

16

15

14

11

10

9

“M”

“N”TRANSMIT

RECEIVE

1

2

3

6

8

7

16

15

14

11

10

9

1

2 3

14

15

16

TRANSMIT

8 (7*)

6 (5*)

7 (6*)

10

11 (12*)

9 (11*)

“K” & “K1*”RECEIVE

TRANSMIT

RECEIVE

1

2

15

16

7

6

11

10

“P”


29

Features• EMI noise suppression for data and signal line filtering• Miniature, low cost SMD common mode chokes are designed for pick and place compatability & provide reliable Coplanarity• High attenuation over a wide frequency range• Manufactured in an ISO 9001:2015 and

ISO 14001:2015 certified Talema facility• Other inductance values available upon request• Parts shown below meet all popular footprints• Fully RoHS & REACH Compliant and

meets lead free reflow level J-STD-020C

Test voltage between windings: 500VrmsTest frequency: Inductance measured @ 100KHz/20mV

Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating temperature: -25° to +85°CStorage temperature: -40° to +125°CClimatic category: according to IEC68-1 25/85/56


Common Mode Interface Chokes for LAN & Telecom Applications

Miniature Common Mode Chokes for Data and Signal Line EMI suppression

rebmuNtraPLCO)Hµ(

%03±

IN)Am(

RCD)smhOm(

rebmuNslioCfo

sgnidniWlioCrep

citamehcS

snoitacilpparalimisdnasubNACrofgnidniwrotceS

ES011-2-JTC 11 052 061 1 2 A

ES022-2-JTC 22 052 591 1 2 A

ES033-2-JTC 33 002 062 1 2 A

ES015-2-JTC 15 002 003 1 2 A

S060-2-JMC/JLC 6 0052 08 1 2 A

S052-2-JMC/JLC 52 008 011 1 2 A

S015-2-JMC/JLC 15 008 061 1 2 A

seniLataDowT

011-2-JTC 11 003 061 1 2 A

101-2-JTC 001 003 081 1 2 A

122-2-JTC 022 002 052 1 2 A

174-2-JTC 074 002 083 1 2 A

201-2-JTC 0001 051 066 1 2 A

222-2-JTC 0022 051 048 1 2 A

233-2-JTC 0033 051 0051 1 2 A

274-2-JTC 0074 051 0081 1 2 A

050-2-JMC/JLC 5 0021 06 1 2 A

011-2-JMC/JLC 11 005 08 1 2 A

042-2-JMC/JLC 42 005 001 1 2 A

052-2-JMC/JLC 52 005 011 1 2 A

074-2-JMC/JLC 74 005 031 1 2 A

015-2-JMC/JLC 15 005 841 1 2 A

101-2-JMC/JLC 001 005 513 1 2 A

174-2-JMC/JLC 074 005 092 1 2 A

201-2-JMC/JLC 0001 005 572 1 2 A

222-2-JMC/JLC 0022 004 543 1 2 A

274-2-JMC/JLC 0074 002 049 1 2 A

301-2-JMC/JLC 00001 002 0041 1 2 A

302-2-JMC/JLC 00002 041 0081 1 2 A

374-2-JMC/JLC 00074 001 0093 1 2 A

rebmuNtraP )Hµ(LCO%03±

IN)Am(

RCD)smhOm(

rebmuNslioCfo

sgnidniWlioCrep citamehcS

seniLataDowT

062-2-JCC 62 009 55 1 2 A

201-2-JCC 0001 055 041 1 2 A

251-2-JCC 0051 055 001 1 2 A

222-2-JCC 0022 055 511 1 2 A

233-2-JCC 0033 055 041 1 2 A

205-2-JCC 0005 005 081 1 2 A

286-2-JCC 0086 054 003 1 2 A

301-2-JCC 00001 004 052 1 2 A

321-2-JCC 00021 004 072 1 2 A

382-2-JCC 00082 072 025 1 2 A

305-2-JCC 00005 002 079 1 2 A

307-2-JCC 00007 071 0941 1 2 A

A-0.1-JDC 0001 006 091 1 2 A

A-7.1-JDC 0071 055 002 1 2 A

A-2.2-JDC 0022 053 003 1 2 A

A-3.3-JDC 0033 053 073 1 2 A

A-7.4-JDC 0074 053 006 1 2 A

A-8.6-JDC 0086 053 015 1 2 A

A-01-JDC 00001 053 026 1 2 A

A-21-JDC 00021 003 086 1 2 A

A-51-JDC 00051 003 027 1 2 A

A-22-JDC 00022 003 029 1 2 A

A-82-JDC 00082 003 0201 1 2 A

A-33-JDC 00033 003 0211 1 2 A

A-05-JDC 00005 003 0081 1 2 A

A-07-JDC 00007 003 0012 1 2 A

30



rebmuNtraP)Hµ(LCO

%03±IN

)Am(RCD

)smhOm(rebmuNslioCfo

sgnidniWlioCrep

citamehcS

seniLataDruoF

062-4-JCC 62 006 55 1 4 B

074-4-JCC 74 005 001 1 4 B

101-4-JCC 001 004 031 1 4 B

122-4-JCC 022 004 091 1 4 B

174-4-JCC 074 004 031 1 4 B

186-4-JCC 086 004 041 1 4 B

201-4-JCC 0001 053 091 1 4 B

251-4-JCC 0051 053 021 1 4 B

222-4-JCC 0022 053 041 1 4 B

233-4-JCC 0033 053 081 1 4 B

205-4-JCC 0005 033 032 1 4 B

301-4-JCC 00001 032 034 1 4 B

321-4-JCC 00021 071 097 1 4 B

385-4-JCC 00085 09 0532 1 4 B

B-0.1-JQC 0001 004 002 1 4 B

B-7.1-JQC 0071 053 062 1 4 B

B-2.2-JQC 0022 003 013 1 4 B

B-3.3-JQC 0033 003 083 1 4 B

B-0.5-JQC 0005 003 034 1 4 B

B-8.6-JQC 0086 003 058 1 4 B

B-01-JQC 00001 003 0601 1 4 B

B-21-JQC 00021 052 0211 1 4 B

B-85-JQC 00085 002 0042 1 4 B

B-09-JQC 00009 051 0514 1 4 B

E61-042-JUC 42 008 54 2 2 E

E61-043-JUC 43 007 55 2 2 E

E61-101-JUC 001 054 531 2 2 E

E61-174-JUC 074 054 59 2 2 E

E61-201-JUC 0001 054 531 2 2 E

E61-274-JUC 0074 003 013 2 2 E


31



rebmuNtraPLCO

%03±)Hµ(IN

)Am(RCD

)smhOm(rebmuNslioCfo

sgnidniWlioCrep

citamehcS

seniLataDxiS

C61-042-JUC 42 056 54 2 3 C

C61-074-JUC 74 054 09 2 3 C

C61-101-JUC 001 053 071 2 3 C

C61-174-JUC 074 053 59 2 3 C

C61-201-JUC 0001 033 071 2 3 C

C61-274-JUC 0074 002 034 2 3 C

D61-042-JUC 42 006 57 3 2 D

D61-043-JUC 74 005 011 3 2 D

D61-101-JUC 001 054 531 3 2 D

D61-174-JUC 074 053 022 3 2 D

D61-201-JUC 0001 053 022 3 2 D

D61-274-JUC 0074 091 057 3 2 D

seniLataDthgiE

A61-042-JUC 42 055 54 2 4 A

A61-043-JUC 74 004 09 2 4 A

A61-101-JUC 001 052 042 2 4 A

A61-174-JUC 074 052 59 2 4 A

A61-201-JUC 0001 052 042 2 4 A

A61-274-JUC 0074 061 006 2 4 A

B61-042-JUC 42 034 031 4 2 B

B61-043-JUC 74 061 081 4 2 B

B61-101-JUC 001 003 062 4 2 B

B61-174-JUC 074 003 081 4 2 B

B61-201-JUC 0001 003 042 4 2 B

B61-274-JUC 0074 061 0811 4 2 B


Packaging & Dimensions • SMD Data and Signal Line Filter Chokes


32

Dimensions: Inches (Millimeters);Tolerance: ±0.010 (0.25) unless specified otherwise;Surface Coplanarity will be 0.004 (0.10) maximum

Mechanical Dimensions

CLJ/CMJ-2 CUJ-XXX-16

0.050(1.27)

0.177 (4.50)

0.197 (5.00)

0.130(3.30)

SE1

510

CTJ-2

0.130(3.30)

0.083 (2.10)

0.020 x 0.12(0.50 x 0.30)

1 4

2 3

SchematicA


0.069(1.75)

0.050(1.27)

0.031(0.80)

0.236(6.00) 0.100

(2.54)

1 8

2 7

3 6

4 5

B

1 8

4 5

A

CCJ-2 / 4

0.433(11.00)

0.300 (7.62)

0.472 (12.00)

0.551 (14.00)

TALEMA INWK/YR

Part Number

8 5

1 4

0.354(9.00)

0.315 (8.00)

0.020 x 0.12(0.50 x 0.30)


0.102(2.60)

0.047(1.20) 0.590

(15.00)

0.300(7.62)

SchematicsA

1 162 153 144 135 126 117 108 9

B1 162 153 144 135 126 117 108 9

C1 162 153 144 135 126 117 108 9

D1 162 153 144 135 126 117 108 9

E1 162 153 144 135 126 117 108 9

0.189(4.80)

0.236(6.00)

Pins: 0.012 x 0.020 (0.30 x 0.50)

0.378(9.60)

0.504(12.80)

0.350(8.89)

0.077 (1.96)

0.346(8.80)

TALEMA INWK/YR

Part Number

Suggested Pad Layoout

0.079(2.00)

0.394(10.60)

0.031(0.80)

0.050(1.27)

0.350(8.89)


3 x 0.050(3 x 1.27)

0.028(0.70)

0.394(10.00) 0.197

(5.00)

SchematicA

CLJ/CMJ-4

0.150 (3.80)

0.189(4.80)

0.016 x 0.016(0.40 x 0.40)

0.287 (7.30)

0.350 (8.90)

3 x 0.050(3 x 1.27) 0.213

(5.40)

CLJ

-4-

XX

XW

k/Y

r

1 4

2 3

Schematic

A

CLJ

-2-

XX

XW

k/Y

r

0.100(2.54)

0.287 (7.30)

0.350 (8.90)

0.213(5.40)

0.020 x 0.012(0.50 x 0.30)

0.146 (3.70)

0.185(4.70)

0.039(1.00)

0.100(2.54)

0.213(5.40)

0.394(10.00)


1 8

2 7

3 6

4 5

Tape & Reel Packaging and Dimensions


Carrier Tape Dimensions (12.00mm, 16.00mm & 24.00mm)

Ao, Bo & Ko - Vary accoding to the Component Size & Shape

1.75

CoW

1.75

±0.1

0

4.0±0.10

A

A

0.50±0.05

Ao

Bo

1.50 +0.1/-0.0

Section A-A

Ko

Ao, Bo, Co & Ko - Vary accoding to the Component Size & Shape

Carrier Tape - 1

Carrier Tape - 2

Carrier Tape Dimensions (32.00mm & 44.00mm)

W

1.75

±0.1

0

4.0±0.10

A

A

0.40±0.05

Ao

Bo

1.50 +0.1/-0.0

Section A-A

Ko

Empty PocketsMin. 160mm


Drawing direction

LABEL INFO.

LABEL INFO.

Components

LABEL INFO.

LABEL INFO.

LABEL INFO.



Drawing direction

LABEL INFO.

LABEL INFO.

Components

LABEL INFO.

LABEL INFO.

LABEL INFO.

epaTreirraCmmnisnoisnemiD

htdiW hctiPoC

00.23 05.82

00.44 05.04

33

Tape & Reel Packaging and Dimensions

Reel Drawing

A CN

B

D

LABEL INFO.

Inside Carton Outer Carton

335

335

52

355

355295


snoisnemiDleeRdnaepaT

ehtfoemaNseireS epyTleeR edisnifo.oN

notraCytitnauQ

)leeR/scP(ytitnauQ

)desaC/leeR(

2-JTC mm00.31 5 0002 0002/5

2-JMC/JLC mm00.61 5 0001 0001/5

4-JMC/JLC mm00.61 5 0001 0001/5

JSI mm00.61 5 006 006/5

JCC mm00.42 5 573 573/5

JUC mm00.42 5 006 006/5

JUM mm00.42 5 006 006/5

MJM mm00.42 5 006 006/5

JMM mm00.42 5 006 006/5

MET mm00.42 5 006 006/5

MCMT mm00.42 5 006 006/5

MAT mm00.42 5 006 006/5

MMT mm00.42 5 006 006/5

JDC mm00.23 5 002 002/5

JQC mm00.23 5 002 002/5

JAM mm00.44 5 052 052/5

13.00mm

AType B C D N

16.00mm

24.00mm

32.00mm

44.00mm

Ø330

Ø330

Ø330

Ø330

Ø330

13

16

24

32

44

Ø20.2

Ø20.2

Ø20.2

Ø20.2

Ø20.2

17

20

28

36

48

Ø100

Ø100

Ø100

Ø100

Ø100

Reel Dimensions in “mm”

34

Regional Locations - Design, Manufacturing, Sales & Marketing

Administrative OfficeTalema Electronic India Private LimitedDoor No. 221, 1st and 2nd FloorKJ Plaza, Opp.to Vidya Mandir SchoolMeyanoor Main RoadSalem - 636 004 Tamil Nadu INDIATel: +91 427 - 243 3100Fax: +91 427 - 243 3109E-Mail: [email protected]: www.talema.com

Talema Group, LLCPO Box 935900 Innovation DriveSuite 120, RollaMissouri 65402Tel: +1 573-303-3675E-Mail:[email protected]: www.talema.com

Talema Group Regional Offices

Czech Republic(Design, Manufacturing, Sales & Marketing)

NT Magnetics s.r.o.Chebská 27322 00 PlzeñTel: +420 377 - 338 351Fax: +420 377 - 338 350E-Mail: [email protected]: www.ntmagnetics.cz

Germany(Design, Sales & Marketing)

Talema Elektronik GmbHSembdnerstr. 582110 GermeringTel: +49 89 - 841 00 - 0Fax: +49 89 - 841 00 25E-Mail: [email protected]: www.talema.com

Ireland(Design, Sales & Marketing)

Nuvotem TEOUnits W & X, Gweedore Business ParkDerrybeg, Letterkenny, Co. DonegalTel: +353 (0) 74 95 48666Fax: +353 (0) 74 95 48139E-Mail: [email protected]: www.nuvotem.com

Europe

Asia India(Design, Manufacturing, Sales & Marketing)

Factory PremisesTalema Electronic India Private LimitedPlot Nos. 30, 31 Electrical and ElectronicIndustrial EstateSuramangalamSalem - 636 005 Tamil Nadu INDIATel: +91 427 - 243 3000E-Mail: [email protected]: www.talema.com

North AmericaUnited States(Sales & Marketing)

Locations of Talema Group Regional Offices

35


SummaryTOTAL PROGRAM

SECTION1• TOROIDAL 50/60Hz TRANSFORMERS, TOROIDAL PCB TRANSFORMERS & MEDICAL GRADE ISOLATION TRANSFORMERS

SECTION 2• CURRENT SENSE TRANSFORMERS & INDUCTORS

SECTION 3• CHOKES, INDUCTORS AND TRANSFORMERS

FOR POWER APPLICATIONS

SECTION 4• Transformers & Inductors FOR

SMPS MAGNETICS REQUIREMENTS

SECTION 5• COMPONENTS FOR TELECOMMUNICATIONS

AND DATA LINE TECHNOLOGY

SECTION 6• CURRENT COMPENSATED EMI NOISE

SUPPRESSION CHOKES

SECTION 7• LAN MAGNETIC COMPONENTS FOR

ETHERNET APPLICATIONS

SECTION 8• TI/E1/CEPT-PRI - T3/DS3/E3/STS-1 FOR

TELECOMMUNICATION PRODUCTS

SECTION 9• TRANSFORMERS FOR BROADBAND Access

AND FIBRE CHANNEL INTERFACE

SECTION 10• THE TALEMA GROUP BROCHURE

OVERALL PRODUCTS - AN OVERVIEW

04/19


Documents

Magnetic Components for Communications and Data Line ... Catalog.pdf · E1 / T1 / PRI / CEPT IC Selection Guide for Single & Dual Interface Transformers - 16 - 17 Single and Dual