Embed Size (px)
Citation preview
MAGNETIC MOLD CLAMPING SYSTEM
ABOUT HVR
5 invention patents ,29 utility model patents
CE & ISO 9001 certificated
Quality insured by China PingAn Insurance Group .
18 years technology experience accumulation
Established in 2010
History
2011
2012
2013
2014
2015
2016
Cooperate with SUMITOMO GROUP in Magnetic Quick Mold Clamping System
Cooperate closely with FOXCONN &KOBELCO
Cooperate with HITACHI &FUJITSU
Cooperate with exceed 20 agents worldwidely
Focus on Magnetic Quick Mold Clamping System technology innovation
Get more Invention Patents
HVR founders worked for magnetic industry
2010 HVR Established
Patents
Adhering to the development concept that "science and technology is the first productive force", is the first batch of patent winners for the invention of the permanent magnet industry in China , and the number of patents obtained is far ahead of the industry. Successively obtained 5 invention patents, 29 utility models patents.
Certificate
ISO 9001:2008 LIABLE INSURANCE
"safety, energy saving, high efficiency and environmental protection" is HVR MAG electric permanent magnet products unique advantages, through its reliable product quality and thoughtful service, won the unanimous recognition of customers.
Brand and customer
Exhibitions
Brand and customer
Team style
HVR Magnetic Mold Clamping System
Mold change , min.Done! 3
Main Advantage of HVR Magnetic Mold Clamping System
20%magnetic clamping force higherthan traditional magnet platen
More than 90% mold changetime could be saved
More than 40% labor costcould be reduced
More than 95% energy saving
Unique EPM technique using doublemagnet system.
Magnetic clamping force up to160N/cm2 and keep on even powerfailure.
No need to worry about misoperation8 security protection measures
Safety
A single operator can operate the mold change.No need to loosen and tighten bolts one by one.
More than 90% time is saved.
Quick
Electric power is only used for magnetizingand demagnetizing operation with a few seconds.Over 95%
power saving.
Maintenance cost is lower.
More than 40% labor cost could be reduced
Cost Saving
Working principle of HVR Magnetic Mold Clamping System
HVR Magnetic Mold Clamping SystemVS
Trational Clamping system
Friendly for various types of molds
Unlike the traditional mechanical clamp needs enough space to fasten mold, short the available mold space. No extra space is required for magnetic clamping system, no interface of injection machine platen, making injection machine runing in maximum efficiency way.
During Production Processing, too much time is wasting due to the mechanical clamp selection. Owing to magnetic quick mold change system uniform clamping mold back space, avoid mechanical fake clamping and other dangerous circumstance happen.
No mold deformation
The amount of mold deformation is very difficulty definition during the machine injection manufacturing process; also negative affected the quality of products and the life of mold.
HQMC magnetic clamping method
Uniform clamping mold, no deformation, enhances the strength of platen, no mold deformation during the mold open phase.
Configuration & Specification of HVR Magnetic Mold Clamping System
Magnetic plate(movable side)
Magnetic plate(Fixed side)Safety chain
Operation cabinet
Main control cabinet
Movable side magnet plate Fixed side magnet plate
Main control cabinet
Power
Remote Controller
Injection Molding Machine
Eyebolt
Mounting screw holeMold dislocation detection
Stripper device
Locating ring
Distance detection
Magnetic flux detection
Temperature detection
Junction Box
NOTE: ● Standard configuration ○ Optional configuration
HQMC Magnetic Quick Mold Change System configuration table
HQMC Magnetic Quick Mold change System Specifications
Opetation steps of HVR Magnetic Mold Clamping System
01 Lifting mold into injection machine.
02 Align with the locating ring. And adjust position and close the mold.
Mold Clamping operation
working process
03 Doing MAG operation for fixed and movable side magnet plate.
04 Unlock mold from lifting equipment, remove hoisting gear, then injection machine could normally work.
working process
01 Close the mold and add lifting chain.
02 Doing the DEMAG operation for fixed side and movable side magnet plate.
Remove mold operation
working process
03 Movable platen return back, start to remove the mold.
04 Mold remove operation finish, injection machine Standby.
working process
Application pictures of HVR Magnetic Mold Clamping System
Products
Products
Products
Products
Products
Thanks for Watching
HVR Magnetics Co.,LtdAdd: Zhuzhou city, Hunan Province, ChinaTEL: +86-731-28679879FAX: +86-731-28679979Mob: +86 139 0733 7319Website: www.hvrmagnet.comE-mail: [email protected]
