Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
MAGNETIC OIL LEVEL GAUGEDial Size : 4” (100 mm), 6” (150 mm) and 10” (250 mm)Contacts : Single or Multiple l Conservator Type : Conventional or Aircel
Float movement : Radial or Axial
AT01R1
India Relevant Models Only
l Available With 4-20mA Output
SCHEMATIC (REPRESENTATIONAL ONLY)
Float
Gear & PinionPointer
Dial
Cam
Magnet MagnetMaterial Wall
In Air In Liquid
Micro Switch
CONSTRUCTION & WORKING MOUNTING SWITCH
The 'ATVUS' Magnetic Oil Level Gauge A suitable pad has to be provided to The indicator oil level gauge is factory consists of the main body with following mount the indicator. The mounting can calibrated to operate the switch at low / sub-assembly / parts : be done vertically or at an inclination to very low / high levels in any combination
facilitate easy viewing. as required by customer. 1. Gear assembly 2. Magnetic couple The indicators are normally mounted at The 'ATVUS' Indicator Oil level gauges 3. Float with arm the center of one end of the conservator can be used for varied purposes. In a 4. Cam assembly with micro switch or at the bottom. The different mounting transformer they are mounted on the 5. Dial with pointer positions are illustrated with individual conservator to read oil level in
models. hermetically sealed transformers. They The schematic diagram of the full are also mounted on side wall tank with assembly is shown below. radial float movement.
The float is hinged and swings up or down when oil level rises or falls. This rise or fall rotates the bevel gear and thus the pinion of the gear assembly. The pinion in turn rotates the driving magnet inside the conservator. The follower magnet positioned outside carries a pointer and a cam. The pointer reads oil level and the cam is set to operate the micro switch at a predetermined low level.
CALIBRATION
The dial is calibrated as per customers specification. Hence a drawing showing heights of oil levels inside the conservator at corresponding marking on dial should be made available.
We also provide a questionnaire for specifying your requirement.
Alternately calibration can be provided to ATVUS internal specification.
AT A GLANCE
Operating Liquids
Working PressureEnvironmentElectric SwitchContact RatingSwitch Operation
IP ProtectionDial SizeDial Marking
Transformer oil to IS 335. Other liquids on request.
As per drawing.
Std: Black on white marking. Customized options possible
Micro Switch SPST
0 to 4 Kg/Sq. Cm. Suitable for indoor & outdoor use.
Low Level (LOLA)/ Low and Very Low Level (LOLA & VLOLA) / Low and High Level (LOLA & HOLA) IP 67 / IPX7 100, 150, & 250 mm.
CONVENTIONAL CONSERVATOR SO4 (100mm) AND SO6 (150mm)
FEATURESAll aluminium and brass body and components
Use of rare earth magnets for perfect coupling
Every unit tested for porosity test
Solid Nitrophyl float for lifetime trouble free performance.
Low level alarm contact standard.
Vertical or inclined mounting.
FRONT VIEW
SIDE VIEW
FLOAT MOMENT FORCONVENTIONAL MOLG
Dial:Switch :
Mounting :Switch Wiring :
4-20 mA output :
Standard or CustomisedLow Level Alarm (LOLA) Low & High Level Contacts (LOLA+HOLA) Low & Very Low Level Contacts (LOLA+VLOLA)Vertical, 15° or 30°Single Switch : 1 NO or 1 NC availableDouble Switch : Both switches NO, both switches NC or any combination thereofIntegrated type and separate CCU typeavailable
VARIETY AVAILABLE
AIRCEL CONSERVATOR S04 (100mm) AND SO6 (150mm)
FEATURESInhouse facility of conservator with air cell to checkperformance with rising and falling oil levelInterchangeable with other makes.Individually calibrated and tested.Float arm length with solid float train assembly,in line with international specification.
FRONT VIEW
SIDE VIEW
Dial :Switch :
Mounting :Switch Wiring :
4-20 mA output :
Standard or CustomisedLow Level Alarm (LOLA) Low & High Level Contacts (LOLA+HOLA) Low & Very Low Level Contacts (LOLA+VLOLA)Vertical, 15° or 30°Single Switch : 1 NO or 1 NC availableDouble Switch : Both switches NO, bothswitches NC or any combination thereofIntegrated type and separate CCU type available
VARIETY AVAILABLE
FLOAT MOMENT FORATMS MOLG
FEATURES
S 4 WITHOUT SWITCH, 100mm DIALo
VARIETY AVAILABLE
Radial type available in switched models alsoCustomized dials available
L = ADJUSTABLE OR FIXED FLOAT ARM LENGTH.PROVIDED TO CUSTOMER SPECIFICATION
X
MOLG
FULL
EMPTY
L
20
12
40
30
165 PCD
6
EMPTY
3/41/4
1/2
MADE IN INDIA
R
FULL
Radial or axial dial movementGenuine 100 mm dial with economical designMagnetic coupling allows no possibility ofoil leakage
CONVENTIONAL CONSERVATOR S010 (250mm)
FEATURES
Switch Wiring : Single Switch : 1NO or 1NC available
VARIETY AVAILABLE
Low & High Level Contacts (LOLA+HOLA) Low & Very Low Level Contacts (LOLA+VLOLA)
Dial : Standard or CustomisedSwitch : Low Level Alarm (LOLA)
Mounting : Vertical, 15° or 30°
Double Switch : Both switches NO, both switches NC or any combination thereof
FRONT VIEW SIDE VIEW
Single piece aluminium housing.Front view toughened glass replaceable.Use of rare earth magnets for perfect coupling.Solid Nirtophyl float assemblyVery simple and robust internal design
MADE IN INDIA
TERMINAL BOX
V 4 0 1 6 H
OPTION - BPLUG & SOCKET
OIL LEVEL INDICATORMODEL:SIZE:
SR. NO:
R
VIAT INSTRUMENTS PVT. LTD.
INDIA
VERTICAL AND INCLINEDMOUNTED POSSIBLE
FULL
EMPTY CO
NS
ER
VA
TO
R D
IA
.MOLG
8 Studs M10 at PCD 225 6 Studs M10 at PCD 127
43
13
231
3/4"BSC THD.
5
FLOAT ARM LENGTH PROVIDED
TO CUSTOMER SPECIFICATION
OPTION - ATERMINAL BOX
MOUNTING DETAILV - VERTICAL
SWITCH CONNECTIONL - (LOLA :- LOW OIL LEVEL ALARM)LL - (LOLA VLOLA :- LOW OIL LEVEL ALARM & VERY LOW OIL LEVEL ALARM)LH - (LOLA HOLA :- LOW OIL LEVEL ALARM & HIGH OIL LEVEL ALARM)
MOUNTING PCD225 :- 8Nos HOLE 225 PCD127 :- 6Nos HOLE 127 PCD
CONNECTION TYPEST-TERMINAL BOX2C - ALARM SWT ONLY PLUG AND SOCKET CONNECTOR5C - ALARM AND TRIP SWT ONLY PLUG AND SOCKET CONNECTOR
SO10 NORMAL X X 225 X
FLOAT MOVEMENT CROSS SECTION
DETAIL OF MOUNTING
AIRCEL TYPE CONSERVATOR S010 (250mm)
FEATURESSingle piece aluminium housing.
Front view toughened glass replaceable.
Use of rare earth magnets for perfect coupling.
Solid float train assembly.
Very simple and robust internal design.
In house facility of conservator with air cell to checkcalibration.
Switch : Low Level Alarm (LOLA)Dial : Standard or Customised
Double Switch : Both switches NO, both switches NC or any combination thereof
Low & Very Low Level Contacts (LOLA+VLOLA)Mounting : Vertical, 15° or 30°Switch Wiring : Single Switch : 1NO or 1NC available
VARIETY AVAILABLE
Low & High Level Contacts (LOLA+HOLA)
50.8
98.0
230
VARIETY AND CODING
MOUNTING DETAILV - VERTICAL
SWITCH CONNECTIONL - (LOLA :- LOW OIL LEVEL ALARM)LL - (LOLA VLOLA :- LOW OIL LEVEL ALARM & VERY LOW OIL LEVEL ALARM)LH - (LOLA HOLA :- LOW OIL LEVEL ALARM & HIGH OIL LEVEL ALARM)
CONNECTION TYPEST-TERMINAL BOX2C - ALARM SWT ONLY PLUG AND SOCKET CONNECTOR5C - ALARM AND TRIP SWT ONLY PLUG AND SOCKET CONNECTOR
SO10 ATMS X X 225 X
MOUNTING PCD225 :- 8Nos HOLE 225 PCD127:- 6Nos HOLE 127 PCD
3/4
Fu
ll
1/4
OIL LEVEL INDICATOR VERTICAL &
13
6
15
0
10
0
Em
pty
AIR CELL
.
8 STUD M10AT PCD 225
6 STUD M10AT PCD 127
7
OPTION - BPLUG & SOCKET
OIL LEVEL INDICATORMODEL:SIZE:
SR. NO:VIAT INSTRUMENTS PVT. LTD.
INDIA
V 4 0 1 5
FULL
3/4
1/4EMPTY
FRONT VIEW
FLOAT ARMGEAR
13
23
1
3/4"BSC THD.
FLOAT
OPTION - ATERMINAL BOX
FLOAT ARM LENGTH PROVIDED
TO CUSTOMER SPECIFICATION
SIDE VIEW
FLOAT MOVEMENT CROSS SECTION DETAIL OF MOUNTING
SOLID FLOAT TRAIN ASSEMBLY
MOLG WITH 4-20mA OUTPUT : SEPARATE CCU TYPE
1 2
4 5 6 7 E 8 9
MIN W
SPAN ZERO
RESISTANCEARRAY OPENINDICATION
SUPPLY INPUT90-260V AC/DC
N L
+-EARTH
OUTPUT-1 OUTPUT-2
+-+-
VIAT INSTRUMENTS PVT LTDINDIA
OUTPUT-14-20mA
INPUT FROMMOLG(POT)
OUTPUT-24-20mA
SUPPLY INPUT90-260V AC/DC
11
FLOAT ARM LENGTH PROVIDED TO CUSTOMER SPECIFICATION
GEAR
FLOAT ARM FLOAT
POTENTIOMETER
3/4" BSC THD.
C
TERMINAL BOX
B
A
MOLG
MODEL
SIZE
SL NO.
MOUNTING
VIAT INSTRUMENTS PVT. LTD.
MADE IN INDIA
FULL3/4
1/2
1/4EMPTY
TERMINAL BOXMOLG
MODEL
SIZE
SL NO.
MOUNTING
VIAT INSTRUMENTS PVT. LTD.
FRONT VIEWCONVENTIONAL
FRONT VIEWATMS
SIDE VIEW
FEATURESMOLG with 100/150mm dial 4-20mA output(s)Physical pointer and dial and regular electrical contacts are presenton MOLG, besides addition of 4-20mA output. Separate CCU type: Electronic circuit is in separate CCU that isconnected to MOLG and to be placed in the marshalling box.Power input and 4-20mA output from CCU.Each piece calibrated individuallyRemote display available
VARIETY AVAILABLEDial :Conservator: Switch :
Mounting :Switch Wiring :
Standard or CustomisedConventional or AircelLow Level Alarm (LOLA) Low & Very Low Level Contacts(LOLA+VLOLA)Vertical, 15°Single Switch : 1 NO or 1 NC availableDouble Switch : Both switches NO, bothswitches NC or any combination thereof
CURRENT CONVERTER MARKING
118
100
86
60
10
2Nos HOLE
70
35
10
CCU MOUNTING DETAIL
1 2 3 4MIN W
POT
LOLA:- LOW OIL LEVEL ALARM_(1-SWITCH)
VLOLA:- VERY LOW OIL LEVEL ALARM_(2-SWITCHS)
1 2 3 4 5 6MIN W
POT
WIRING DIAGRAM FOR MOLG
MOLG WITH 4-20mA OUTPUT : INTEGRATED TYPE
FLOAT ARM LENGTH PROVIDED TO CUSTOMER SPECIFICATION
GEAR
FLOAT ARM
FLOAT
POTENTIOMETER
3/4" BSC THD.
L = ADJUSTABLE OR FIXED FLOAT ARM LENGTH.PROVIDED TO CUSTOMER SPECIFICATION
DIN RAIL MOUNTING
INPUT (3-4)85 - 264 VAC
120 - 370 VDC
OUTPUT (1-2) 24 VDC
EMPTY FULL
1/4
1/2
3/4
MADE IN INDIA
C
TERMINAL BOX
B
FILLING LEVEL
DO NOT OPEN
MOLG
MODEL
SIZE
SL NO.
MOUNTING
VIAT INSTRUMENTS PVT. LTD.
TERMINAL BOXMOLG
MODELSIZE
SL NO.
MOUNTING
VIAT INSTRUMENTS PVT. LTD.
MADE IN INDIA
FULL3/4
1/2
1/4EMPTY
DO NOT OPEN
FRONT VIEWCONVENTIONAL
FRONT VIEWATMS
Integrated type: Electronic circuit is integrated inside MOLG and 4-20mA output is available directly from MOLG terminal box. 24 VDC power needs to be supplied to the MOG from a separate (included) power supplyRemote display available
Physical pointer and dial and regular electrical contacts are present on MOLG, besides addition of 4-20mA output.
MOLG with 100/150mm dial 4-20mA output(s)Direct 4-20mA output from MOG itself
Models for Aircel and conventional conservators available
SIDE VIEW
+ - ]]
OUTPUT
POWERINPUT24 VDC
COM NO]
SWITCH-1LOW
ALARM
]
SWITCH-2V.LOWALARM
COM NOOU
TE
RW
IRIN
G 1 2 3 4 5 6 7 8
FROM INCLUDED POWER SUPPLYPLACED IN MARSHALING BOX
MOLG TERMINAL BOXCONNECTION
POWER SUPPLY FOR MOLG(PLACED IN MARSHALING BOX)
VARIETY AVAILABLEDial :Conservator: Switch :
Mounting :Switch Wiring :
Standard or CustomisedConventional or AircelLow Level Alarm (LOLA) Low & Very Low Level Contacts(LOLA+VLOLA)Vertical, 15°Single Switch : 1 NO or 1 NC availableDouble Switch : Both switches NO, bothswitches NC or any combination thereof
VARIETY AND CODING FOR S04 AND S06
GENERAL NOTES
The calibration and switch setting is factory adjusted and should not be tampered.
We continuously review specifications and where appropriate, introduce modifications.
Indicators with different specifications are not interchangeable.
We therefore, reserve the right to change specifications in this catalogue without prior notice.
Calibration for dial in other units is possible.
HOW TO ORDER
3. Conservator diameter.
4. Oil level inside conservator, corresponding to dial marking.
2. Dial marking.
5. A separate Questionnaire is made available in which details of technical
specifications required by us are given. Please ask for the same.
1. Mounting position of indicator.
S04 | S06 WITHOUT 4-20 MA OUTPOUT
S04 | S06 WITHOUT 4-20 MA OUTPOUT
MOUNTING DETAILV - VERTICAL
SWITCH CONNECTIONL - (LOLA :- LOW OIL LEVEL ALARM)LL - (LOLA VLOLA :- LOW OIL LEVEL ALARM & VERY LOW OIL LEVEL ALARM)LH - (LOLA HOLA :- LOW OIL LEVEL ALARM & HIGH OIL LEVEL ALARM)
SO4 ATMS L X X
DIAL SIZESO4:-100mmSO6:-150mm
CONSERVATOR TYPEBLANK :- CONVENTIONAL TYPEATMS :- AIRCEL TYPE
CONNECTION TYPESBLANK -TERMINAL BOX2C - 1 SWITCH PS CONNECTION5C - 2 SWITCH PS CONNECTION
MOUNTING DETAILV - VERTICAL
SWITCH CONNECTIONL - (LOLA :- LOW OIL LEVEL ALARM)LL - (LOLA VLOLA :- LOW OIL LEVEL ALARM & VERY LOW OIL LEVEL ALARM)LH - (LOLA HOLA :- LOW OIL LEVEL ALARM & HIGH OIL LEVEL ALARM)
SO4 NORMAL X X CCU
CONSERVATOR TYPENORMALATMS
CONNECTIONBLANK:- NO 4-20mA OUTPUT PROVIDEDCCU:- SEPARATE CCU 4-20mA OUTPUT4-20mA:- INTEGRATED TYPE WITH 4-20mA OUTPUT
DIAL SIZESO4 :- 100mmSO6 :- 150mm
Due to our policy of continuous product improvement, dimensions and designs are subject to change.
VIAT INSTRUMENTS PVT. LTD. (UNIT-I)2701-2704, Shilpangan Phase-II, Block LB-1, Sector-III, Salt Lake, Kolkata 700 098, INDIA
Phones : +91 33 23352925, +91 9903805104
VIAT INSTRUMENTS PVT. LTD. (UNIT-II)6, Neelkanth Estate, Iyava, Sanand, Ahmedabad 382 170, INDIA
Phones : +91 0 7575 804128 / 804174
E-mail : [email protected] l Website : www.viatin.com