Magnetic Sign Solutions - Magnecorp · SIGN-EEZ™ Slide Lexan Hooks into magnetic holder and hook to banner rail. Pull cord on Gripper to grab magnet holder and raise pole and sign

800.747.4665 | 815.877.7041 • www.southernimperial.com

Safe and easy to install

Magnetic Sign Solutions

www.magnecorp.com 800.747.4665 | 815.877.70412

MAGNETIC SIGN SOLUTIONS

siffron’s magnetic products provide safe and easy solutions for hanging signs, banners, posters and point of purchase items. Retailers have relied on these products for over 30 years.

We invented the “No-Ladder” Sign-EEZ™ system to eliminate injuries caused by falling off ladders while installing promotional and seasonal signs. Our innovations continue today with new ways to safely add signs to your store environment and increase sales.

Read The Case Against Ladders on page 4.

Our Story

Learn more at www.magnecorp.com

MAGNETIC SIGN SOLUTIONS

3 800.747.4665 | 815.877.7041 www.magnecorp.com

Table of Contents

page 5 page 14 page 16

page 18 page 20 page 22

page 24 page 30

Sign-EEZ™ Adhesive MagnaClamp™ II

Hanging MagnaClamp™ II SignKeeper™

Hanging Accessories

MagnaClamp™

MagnaClamp™ III

Custom Ad Clamps Lower prices available on many of our magnetic sign solutions. Visit us online or call us to learn more.


SIGN-EEZ™

The Case Against Ladders

• Over 20,000 injuries occur every year with the use of ladders.

• Over 11,000 of these injuries resulted in work loss from 1 to 364 days.

• 66% of all injured had not been trained on how to use the ladder.

• 53% of the ladders were broken during the yearly injuries.

Manner in which fatal work injuries occurred – 2016*

16%falls

10%exposure to harmfulsubstances

2%fires and explosions

40%transportationincidents

15%contact withobjects and equipment

17%assaults and violent acts

• Do you want your employees on ladders?

• Are your people in the stores trained to use ladders?

• Are you willing to risk putting your employees in danger while on a ladder?

• Are your insurance polices large enough to handle the claims from ladder accidents?

Injury is costly! Fall reduction is smart.

Protect your employees and your bottom line by providing a safe solution to hanging signs!

* Source: U.S. Bureau of labor Statistics, 2017.


SIGN-EEZ™

NO

LADDER SYSTEM

Extend Telescopic Pole to 8’, 12’, 18’ or 24’

The Original Sign-EEZ™ for Open Ceilings.

SAFE & EASY

PAT E N T E D

Retailers have trusted the Sign-EEZ™ System for over 30 years! Sign-EEZ™ provides a quick and easy way to change out seasonal and promotional ceiling signs without a ladder.

No-Ladder System

The original, safe sign hanging solution!

Sign EEZ™


SIGN-EEZ™

Slide Lexan Hooks into magnetic holder and hook to banner rail.

Pull cord on Gripper to grab magnet holder and raise pole and sign to ceiling or window.

Attach magnetic holder to ceiling grid and use cord to release once it is in place.

How it worksSign-EEZ™ is the easiest and safest system on the market for hanging promotional signs and banners!


SIGN-EEZ™

Sign-EEZ™ in Windows

Sign-EEZ™ in Open Ceilings

Sign-EEZ™ on Mall Grids

Need a customized solution? Not a problem!We can design and manufacture to your particular need.

Call us today to get started on a custom quote.

There is a Sign-EEZ™ solution for almost every sign hanging application!

Use Sign-EEZ™ Everywhere


Turn Any Whichway• Hang sign holder with graphic from ceiling grid and

rotate any direction for optimal viewing• Install easily using Sign-EEZ™ telescopic pole• Available in standard 26” and 36” lengths

• Attach to any ceiling grids or other magnetic surfaces for hanging banners• Available in 12”, 26” and 36” lengths to accommodate most banner sizes• Use with clear Lexan, block-end hooks (see page 11)

Magnetic Holders

• Telescopic pole is sturdy aluminum with plastic gripper and braided pull cord• Use to hang Sign-EEZ™ Magnetic Hangers• All Sign-EEZ™ holders can be installed using the telescopic pole and gripper• Available in 8’, 12’, 18’, and 24’ lengths

Aluminum Telescopic Pole & Gripper

SIGN-EEZ™ COMPONENTS

Item No. Dimensions FinishR-ATP08AL 8’ extension/13’ ceiling Blue/SilverR-ATP12AL 12’ extension/17’ ceiling Blue/SilverR-ATP18AL 18’ extension/23’ ceiling Blue/SilverR-ATP24AL 24’ extension/29’ ceiling Blue/Silver

Item No. Dimensions FinishR-MH12 12” L WhiteR-MH26 26” L WhiteR-MH36 36” L White

Item No. Dimensions FinishR-MHT26 26” L WhiteR-MHT36 36”L White


• Non-Magnetic holder extension which straddles between grid and tile• Works with Clear Lexan Hooks

Cross Grid Holders

• Non-magnetic holder designed to hang on wire grid system often found in malls

• Hooks can slide to adjust for best fit • Locks to banner rail• Hooks can be adjusted horizontally on banner rail• Works with Clear Lexan Hooks

Mall Grid Holders

Open Ceiling Holders• Non-magnetic holder has large hooks for hanging over open ceiling beams• Mounts over steel truss, beams, girders, utility risers and piping• Swivel features allows sign to be displayed at any angle• Works with Clear Lexan Hooks


Item No. Dimensions FinishR-OCSH12 7.5” H x 12” L WhiteR-OCSH26 7.5” H x 26” L WhiteR-OCSH36 7.5” H x 36” L White

Item No. Dimensions FinishR-MGPH12 4.324” H x 12” L WhiteR-MGPH26 4.324” H x 26” L WhiteR-MGPH36 4.324” H x 36” L White

Item No. Dimensions FinishR-CGH24 24” L White

Works with Clear Lexan Hooks


• High-energy magnet strips with adhesive backing• Mount to flat ceilings or inside window sill to create

magnetic surface for hanging signs• 26” and 36” lengths available• Available in brown or white

Magnetic Mount Strips

• Metal Mount Strips for use with Sign-EEZ™ Magnetic Holders• Mount to flat ceilings or inside window sill to create

magnetic surface for hanging signs• Adhesive back for mounting• Includes holes for fastening with screws

Metal Mount Strips

• Very high strength magnets for holding larger, heavier signs (over 5 pounds)

• Attaches to ceiling grids and other magnetic surfaces• Custom product offers (call for details)

Neodymium Holders


Item No. Dimensions FinishCall for Details/Custom Quotes White/Silver

Item No. Dimensions FinishR-MMSA-12 1” W x 12” L WhiteR-MMSA-26 1” W x 26” L WhiteR-MMSA-36 1” W x 36” L White

Item No. Dimensions FinishR-HEM26_ 26” L Brown/WhiteR-HEM36_ 36” L Brown/White


• Use .092” Double “C” Wire Hangers to hang banner rails from Swivel Hanger or Multi-Clips

• Large .625” hook opening for easy installation• Custom lengths are available (call for details)

Wire Ceiling Hangers

• Multi-Clip adapts to the Sign-EEZ™ Holders for wire hooks

Multi-Clip

• Clear Lexan Hooks with block ends designed to slide into a Sign-EEZ™ Magnetic Holder

• Hole in block end for linking multiple hooks together• Available in 4.5” length and 16” length

Clear Lexan Hooks

SIGN-EEZ™ ACCESSORIES

Item No. Dimensions FinishR-CPHB04 4.5” L ClearR-CPHB16 16” L Clear

Item No. Dimensions FinishR-MCA .375” W x .625” H x .625” L Clear

Item No. Dimensions FinishRWCH-4-092 .092” Dia. x 4” L Galv.RWCH-6-092 .092” Dia. x 6” L Galv.RWCH-8-092 .092” Dia. x 8” L Galv.RWCH-12-092 .092” Dia. x 12” L Galv.RWCH-16-092 .092” Dia. x 16” L Galv.RWCH-24-092 .092” Dia. x 24” L Galv.RWCH-36-092 .092” Dia. x 36” L Galv.


Pictured here: Sign-EEZ™ rail with 4” and 16” Lexan hooks.

Utilize the various accessories of the Sign-EEZ™ system to create tiered displays and mobiles for holiday and seasonal decor.

No-Ladder System

Safely hang holiday and seasonal decor!

SIGN-EEZ™

Sign EEZ™


SIGN-EEZ™

Different sizes of rails available depending on display size.

Turn Any Whichway rail allows for perfect angle of display.

Different lengths of Lexan hooks create tiered display.

Utilize Multi-clips for different product attachment types.

Easily update your seasonal promotions!

Combine different Lexan hooks or hanger lengths to create a tiered look.

Perfect for hanging individual decorations centered

on one Sign-EEZ™.

Span banners from one end of the ceiling to the other.

Utilize Sign-EEZ™ for hanging holiday and seasonal decor. We offer a wide variety of components to help create the ideal holiday display or eye-catching arrangement of products.

Holiday Decor

Sign-EEZ™ is for more than just signs and banners.


ORIGINAL MAGNACLAMP™

Original MagnaClamp™

• Easy to open use• Ideal for sign placement on windows, walls and shelving• Stock sizes available: 3”, 6”, 24”, 36”, and 48” lengths• Custom lengths available• Available in black or white• Custom printed “Ad Clamps” also available (see page 30)

Place high-impact signage on windows, walls or any flat or solid surface.

How it works

Remove adhesive tape backing from MagnaClamp™.

Mount MagnaClamp™ to a clean, flat surface and open hinge

to insert sign material.

Close MagnaClamp™ to hold sign flush to the surface.


Pegboard MagnaClamp™• Ideal for up to .30” thick sign material placement within pegged product• Designed to hold sign flush to surface• Inserts into standard pegboard and slatwall• Suggested uses: produce and grocery, store shelving, and walls

Notched MagnaClamp™• Quick and simple way to display and organize

a continuous line of small signs• Signs can be inserted or removed without disturbing others• Adhesive backing separated on the front every 12”• Suggested uses: produce and grocery, store shelving, and walls

Original MagnaClamp™• The original MagnaClamp™ is a clear plastic polyester hinge with

matching polarity magnetics for a firm sign holding grip• Folded height is 1 inch• Hinged Magnetic sign holders great for store shelving and walls• Enhance your brand message with custom printed

MagnaClamps™ (call for details - see page 30)

ORIGINAL MAGNACLAMP™

Item No. Dimensions FinishR-MC03_ 3” L White/BlackR-MC06_ 6” L White/BlackR-MC24_ 24” L White/BlackR-MC36_ 36” L White/BlackR-MC48_ 48” L White/Black

Item No. Dimensions FinishR-PS3_ 2.375” L White/Black

Item No. Dimensions FinishR-NMC36_ 36” L White/BlackR-NMC48_ 48” L White/Black


ADHESIVE MAGNACLAMP™ II / QUICK-CHANGE FRAMES

Adhesive MagnaClamp™ II

• Create a more upscale appearance• Ideal for sign placement on walls and shelving• Stock sizes: 24”, 36”, and 48” lengths• Custom sizes and colors are available (call for details)

Remove liner to expose adhesive on back of MagnaClamp™ II.

Mount MagnaClamp™ II to a clean, flat surface and open hinge to

insert sign material.

Frame sign with MagnaClamp™ II Quick Change

Frames for a variety of sign sizes.

Enhance the appearance of sign displays with quick-change functionality.

How it works


ADHESIVE MAGNACLAMP™ II / QUICK-CHANGE FRAMES

MagnaClamp™ II Quick-Change Frames• Convenient and fast sign mounting with adhesive backing• Two style available: as individual strips or mounted to backer board • Mount horizontally or vertically• Mitered edges for easy front loading and a better sign fit• Holds up to .030” material• Custom sizes are available (call for details)

MagnaClamp™ II (hard shell) with Adhesive• The MagnaClamp™ II is a solid hard-shell extrusion with

matching polarity magnetics for a firm sign holding grip• Use MagnaClamp™ II at top and bottom• .75” high adhesive backing• Holds up to .030” material• Custom sizes are available (call for details)

Item No. Dimensions FinishR-HSMC24_ 24” L White/BlackR-HSMC36_ 36” L White/BlackR-HSMC48_ 48” L White/Black

Add “W” for White or “K” for Black.

Item No. Dimensions Finish Individual StripsR-QCF11X14_ 11” x 14” Inside White/BlackR-QCF22X28_ 22” x 28” Inside White/BlackR-QCF24X36_ 24” x 36” Inside White/Black Mitered Frame with BackerR-QCB1117 11” x 17” Inside BlackR-QCB1824 18” x 24” Inside BlackR-QCB2228 22” x 28” Inside Black

The magnetic hold of the MagnaClamp™ II makes changing signs a breeze! Simply hinge open the rail, insert sign and close.


HANGING MAGNACLAMP™ II

• Great option for quick change signs and posters• Ideal for hanging signs from ceilings and windows• Use Stabilizer on bottom to prevent curl• Stock sizes available: 24”, 36”, and 48” lengths• Custom lengths available• Available in black, silver or white

How it works

Hanging MagnaClamp™ II

Insert the sign material in-between the two

MagnaClamp™ II magnets.

Close MagnaClamp™ II on top and bottom of sign

material for a secure hold.

Hook ceiling hangers through pre-drilled holes to hang from a

Sign-EEZ™ Magnetic Holder.

Ideal banner rail hanging solution for signs up to .040” thick.


HANGING MAGNACLAMP™ II

MagnaClamp™ II Stabilizer• Use MagnaClamp™ II Stabilizer at the bottom of sign to stabilize graphic• Hinged magnets hold securely onto bottom• Holds up to .030” material• Reusable to save money• Lengths of 24”, 36”, and 48”• Available in white and black

Hanging MagnaClamp™ II• Hard-shell construction with pre-drilled hanging holes

in vertical backing for easy installation• Instantly hang signs from ceiling or windows and increase sales• Holds up to .030” material• Lengths of 24”, 36”, and 48”• Available in white and black

Item No. Dimensions FinishR-MCHH24_ 24” L White/BlackR-MCHH36_ 36” L White/BlackR-MCHH48_ 48” L White/Black

Item No. Dimensions FinishR-MCS24_ 24” L White/BlackR-MCS36_ 36” L White/BlackR-MCS48_ 48” L White/Black

Without Stabilizer

With Stabilizer


MAGNACLAMP™ III

• Great low-price option for quick change signs and posters• Thinner Extruded PVC for a slim, smooth design aesthetic• Stock sizes available: 6”, 24”, 36”, and 48” lengths• Custom lengths available• Available in black or white

How it works

MagnaClamp™ III

Remove liner to expose adhesive on back of MagnaClamp™ III.

Insert the sign material in-between the two

MagnaClamp™ III magnets.

Close MagnaClamp™ III to hold sign flush to any clean, flat

wall or display surface.

Economical solution with strong magnetic hold for quick-change signs.


MAGNACLAMP™ III

MagnaClamp™ III• A thin extruded MagnaClamp™ • Keeps sign secured and straight• Adhesive backing for mounting signs flush to

shelf edge, wall, or P.O.P. display• Folded height: 1 inch• Holds up to .030” material• Standard lengths: 6”, 24”, 36”, 48”

Item No. Dimensions FinishR-SMC06_ 6” L White/BlackR-SMC24_ 24” L White/BlackR-SMC36_ 36” L White/BlackR-SMC48_ 48”L White/Black


SIGNKEEPER™

• Lightweight and durable hinge opens for sign insertion• Reduces visual interference of the sign or banner• Easy to mount on wall with adhesive or hang from ceiling• Stock sizes available: 24”, 36”, and 48” lengths• Custom lengths available

How it works

SignKeeper™

Open SignKeeper™ clamp, insert graphic material and align to desired position.

Press down and tuck under the SignKeeper™ clamp for a secure fit.

Mount SignKeeper™ Stabilizer at bottom of the sign to prevent curling, if necessary.

Clear, extruded plastic provides form grip for hanging signs and banners.


SIGNKEEPER™

SignKeeper™ Stabilizer• A clear PVC extrusion designed to add weight to the

bottom of a sign or banner to prevent curl• Holds up to .030” material• Contains UV Inhibitors

Hanging SignKeeper™• Clear PVC “snap-shut” extrusion with hanging holes• Holds graphic signs up to .030” thick material• Easy and quick installation of graphic; simply

open, insert print, and snap-shut• Contains UV Inhibitors

Adhesive SignKeeper™• A clear PVC extrusion backed with foam adhesive

to hold against all types of surfaces• Holds graphic signs up to .030” thick material• Easy and quick installation of graphic; simply

open, insert print, and snap-shut• Contains UV Inhibitors

Item No. Dimensions FinishR-SSSK24 24” L ClearR-SSSK36 36” L ClearR-SSSK48 48” L Clear

Insert sign and snap shut

Item No. Dimensions FinishR-SKHH24 24” L ClearR-SKHH36 36” L ClearR-SKHH48 48” L Clear

Item No. Dimensions FinishR-SKS24 24” L ClearR-SKS36 36” L ClearR-SKS48 48” L Clear


HANGING ACCESSORIES

• Ceiling twist loop - .875” I.D• Securely attaches with a quick turn• White color blends into ceilings

Natural Loop Ceiling Clip• Easy-install ceiling loop• Natural, semi-clear color• Unique hinges allow installation onto drop ceiling grids

Clinch Hanger Ceiling Clip• Hanger attaches to ceiling grid• High strength with low cost• Works well in tight spaces - fits next to air or light fixtures

Clear Plastic Hook Lock Ceiling Clip• One-piece clear plastic hook locks firmly onto suspended ceiling• Hinge feature allows for quick removal for instant banner changes

Item No. Dimensions FinishR16-CC001 2” O.D. Base, .875” Loop White

Loop Twist Ceiling Clip

Item No. Dimensions FinishR16-CC002 1” W x 1.75”, .3125” Dia. Clear

Item No. Dimensions FinishRKCH-7/8 .625” W x .75” H, .156” Dia. White

Item No. Dimensions FinishR23-140-20 .5” W x 1.5” H Clear

HANGING ACCESSORIES


9/16” Grid Ceiling Clip• Easy-install hook for .5625” grid• Natural, semi-clear color• Unique hinges allow installation onto drop ceiling grids

1” Hook Ceiling Clip• Heavy-duty, easy-install hook• Natural, semi-clear color• Unique hinges allow installation onto drop ceiling grids

Snap ‘n’ Hang Ceiling J-Hook Clip• Patented design snaps onto acoustical ceiling T-bar grid• Swiveling J-hook style rotates into desired hanging orientation• Each clip can hold up to 10 pounds of weight

Snap ‘n’ Hang Ceiling Loop Clip• Patented design snaps onto acoustical ceiling T-bar grid• Ideal for hanging items utilizing “C” style or hangers or S-hook• Loop style is in fixed position and does not rotate• Each clip can hold up to 10 pounds of weight

Item No. Dimensions FinishR16-CC003 1” W x 1.5” H Clear

Item No. Dimensions FinishR16-CC004 1” W x 1.625” H Clear

Item No. Dimensions FinishRSH-S300 1.0625”W x .5” D x 1.75”H White

Item No. Dimensions FinishRSH100 1.0625”W x .5” D x 1.0625”H White

PAT E N T E D

PAT E N T E D


HANGING ACCESSORIES

Twist Swivel Ceiling Clip• One twist securely attaches to standard drop ceiling grids• Clear construction• Swiveling head

Metal Twist Ceiling Clip• Metal ceiling twist loop• .25” loop made from spring-steel• Powder coated white

Twist Coil Ceiling Clip• Ceiling tile twist-in coil• .040” spring-steel wire• Easily screws into most acoustic ceiling tile and foam board

Wire Squeeze Ceiling Clip• Wire squeeze clip• Low-cost, one-piece design• .092” galvanized wire clip

Item No. Dimensions FinishR-SWCC-3 1” W x 3” L x .75” H Clear

Item No. Dimensions FinishR16-CC011 1” W x 1.5” L, .25” Loop White

Item No. Dimensions FinishR16-CC006 .375” O.D. x 1.25” L Galv.

Item No. Dimensions FinishRCH-092 .092 Wire x 3” H, 6’ Cord Galv.


Wire Squeeze Ceiling Clip with Cord• Wire squeeze clip with 6’ cord• Low-cost, one-piece design• .062” galvanized wire clip

Ceiling Twist Clip with 6” Cord• Ceiling twist clip with 6’ cord• One twist securely attaches to standard drop ceiling grids

Tri-Panel Mobile Kits• Kit includes: 1 top, 1 bottom, and 1 hook and 6’ cord set• Frames produced with high impact opaque polypropylene

HANGING ACCESSORIES

Item No. Dimensions FinishR16-CC005-6 .062 Wire x 3.5” H, 6’ Cord Galv.

Cotton Cord Ceiling Clip• Unique design allows for use with any hanging situation• Includes barbed, white cotton 6’ cord for hanging signs and banners

Item No. Dimensions FinishRPHC-6 2.25” L x .1875” W, 6’ Cord White

Item No. Dimensions FinishR16-CC007-6 .5” W x 2” L, 6’ Cord White

.

Item No. Dimensions FinishRTP-SM 6.75” x 6.75” x 6.75” Trans.RTP-LG 12.75”x 12.75” x 12.75” Trans.


HANGING ACCESSORIES

Looped-End Ceiling Cables• Looped-end ceiling cables• .5” loop at each end secured by heavy-duty crimped-on sleeves• .03125” cable diameter

Chain Kits• Bagged kits include (2) #16 x 48” chains and (4) 1” S-hooks• Convenient pack for easy distribution with sign kits• Chain shown with Clinch Hanger (RKCH-7/8, sold separately)

Jack Chain Rolls• Single jack chain made with bright galvanized steel on plastic spools• #16 wire (.062” diameter) holds 10 lbs• #14 wire (.080” diameter) holds 16 lbs• #12 wire (.105” diameter) holds 29 lbs

Item No. Dimensions FinishR16-LEC-6 .03125” Dia. x 6” L Galv.R16-LEC-12 .03125” Dia. x 12” L Galv.R16-LEC-18 .03125” Dia. x 18” L Galv.R16-LEC-24 .03125” Dia. x 24” L Galv.R16-LEC-36 .03125” Dia. x 36” L Galv.

Item No. Dimensions FinishR16-CHNK24S4 48” #16 chains, 1” S-hooks Galv.

Item No. Dimensions FinishR16-CHN16250 #16 x 250’ Roll Galv.R16-CHN14250 #16 x 240’ Roll Galv.R16-CHN12100 #12 x 100’ Roll Galv.


HANGING ACCESSORIES

Wire Ceiling Hangers• .092” Wire Ceiling Hanger• Large .625” hook opening for easy installation• Custom lengths available (call for details)

Ceiling Grid Spanner Bar• 24” L x 1” W with notched ends to fit into your current drop-ceiling grid• Allow for pin point positioning of signage at any ceiling location• No tools required - simply rotate ends into place over existing grid

PowerTabs™ Banner Holders• PowerTabs™ Banner Holders designed to stabilize the

corner of banners and posters for hanging• Turn your digital image into a super strong outdoor banner - instantly!• Available in two sizes• No sewing, grommeting or tools required - works with virtually any material• Stocked color is clear• White is available as a custom order (minimums will apply)

Item No. Dimensions FinishRWCH-4-092 .092” Dia. x 4” L Galv.RWCH-6-092 .092” Dia. x 6” L Galv.RWCH-8-092 .092” Dia. x 8” L Galv.RWCH-12-092 .092” Dia. x 12” L Galv.RWCH-16-092 .092” Dia. x 16” L Galv.RWCH-24-092 .092” Dia. x 24” L Galv.RWCH-36-092 .092” Dia. x 36” L Galv.

Item No. Dimensions FinishR16-104100 24” L x 1” W White

Item No. Dimensions FinishR16-BAN-014 2.125” W x 5.5” L ClearR16-BAN-016 1.5” W x 3.125” L Clear


CUSTOM AD CLAMPS

Enhance your brand message with custom printed MagnaClamps™!

• 4-color printing• Custom lengths• Call today for a quote!

Custom Ad Clamps


SOUTHERN IMPERIAL

800.422.2547www.southernimperial.com

Custom Label and Sign Printing

Custom Display Manufacturing

NEXT™ System

Allura™ LED Lighting

Display and Fixture SolutionsDisplay results with Southern ImperialWe are a manufacturer of display and fixture solutions for almost every area of the retail environment. We carry over 2000 stock solutions in our catalog, and there are millions of solutions we can customize for you. We have worked closely with the top retailers throughout the world for over 50 years, and we continually find that there are four key focal areas:

• Increase Sales• Maximize Merchandising Space• Reduce Shrink• Reduce Overall Costs

Our solutions are designed to help retailers achieve those goals. Contact us today and put Southern Imperial to work for you!

Contact us today to achieve your goals!

Phone 800.747.4665 call toll free in North AmericaFax 815.877.7454 fax us your purchase orderWeb www.southernimperial.com buy and find resources online

Ordering is easy!

8181 Darrow Road

Twinsburg, OH 44087

Easily update seasonal promotionsUtilize Sign-EEZ™ for hanging holiday and seasonal decor. We offer a wide variety of components.

Protect your employeesSign-EEZ™ is a no ladder system that provides a safe solution for hanging signs.

Enhance the appearance of sign displaysUse MagnaClamp™ for a firm sign holding grip.

Find more information at www.magnecorp.com

Documents

Magnetic Sign Solutions - Magnecorp · SIGN-EEZ™ Slide Lexan Hooks into magnetic holder and hook to banner rail. Pull cord on Gripper to grab magnet holder and raise pole and sign