Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
Maintenance Guide for your Wahl Adjustable Clipper
A few moments care daily, regular oiling and cleaning,
and proper adjustment will keep your clipper
performing well.
For service or questions about your clipper contact: Wahl Clipper Corporation3001 N. Locust Street Sterling, IL 61081Attention: Repair Departmentemail: [email protected]
PROBLEM SOLUTION
Clipper doesn’t start Check to see it is plugged in.Power cord is frayed, cracked or pulled away - have it replaced.
Motor runs, but bladedoesn’t move
Clipper head is dirty - clean head.Clipper is very hot - cool, oil and adjust power adjustment screw until blade moves freely.Blade has bent or broken teeth - replace blades.
Clipper makes unusualnoise or vibration
Adjust power adjustment screw.
Clipper pulls hair Blades are dull - replace blades.
Blade sticks Clipper is hot - adjust power adjustment screw and oil.Head is dirty - clean and oil.Blades are rusty or have bent tooth - replace blades.
Blade nicks or cuts Blades are out of alignment - realign. Be sure movable blade does not protrude beyond stationary blade
*If clipper is defective, send to Wahl Clipper Co. for service3001 Locust Street, Sterling, IL 61081
TROUBLE SHOOTING
WAHL PROFESSIONAL APPFor Iphone, Ipad & Android devices.
PROUDLY MADE IN THE U.S.A.