Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Making complex building automation
simpler together.KNX/SMI tubular drives for roller shutters and sun protection:
with Becker.
Your own living room is a very special place.
Here you can be who you are, you can feel good, and you can
breathe freely.
Today's house automation systems already offer possibilities
which are undreamed of. One of many advantages:
All the drives communicate with the central house control unit.
The current position of all the roller-shutters can be displayed in
real time on the terminals in the house, and controlled directly
through the touch screen.
2
Note: You can download the installation guidelines for SMI from www.becker-antriebe-objektportal.de, or you can request them from a BecKer contact partner.
Building automation – general considerations ................................................... 4
SMI tubular drives and mechanical accessories for roller shutter applications
Tubular drives for barrels from diameter 38 mm ................................................ 6
Mechanical accessories for barrels from diameter 38 mm ................................. 7
Tubular drives for barrels from diameter 50 mm ................................................ 8
Mechanical accessories for barrels from diameter 50 mm ................................. 9
SMI tubular drives and mechanical accessories for interior shading
Tubular drives for barrels from diameter 38 mm ............................................... 10
Mechanical accessories for interior shading .................................................... 11
SMI tubular drives and mechanical accessories for sun protection applications
Tubular drives for barrels from diameter 50 mm ............................................... 14
Mechanical accessories for barrels from diameter 50 mm ................................ 15
Tubular drives for barrels from diameter 63 mm ............................................... 16
Mechanical accessories for barrels from diameter 63 mm ................................ 17
c-Plug
Plug-in BecKer connecting cable .................................................................. 18
Tool ............................................................................................................... 19
SMI electrical accessories
SMI actuator ................................................................................................. 20
SMI programming unit ................................................................................... 20
USB SMI tool ................................................................................................. 21
SMI connecting terminal ................................................................................. 21
SMI – software and tools
SMI Hirschmann set ....................................................................................... 22
SMI/KNX software tool .................................................................................... 23
SMI easyMonitor ............................................................................................ 23
Load tables
Load tables for roller shutters and sun protection drives .................................. 24
Load tables for awning drives ......................................................................... 25
General conditions of sale .............................................................................. 26
Table of contents3
5Protection against sun, heat and UV
You are not at home, and the sun is beating down mercilessly. Your roller shutter or your external blinds are closed by the automatic sun protection control. The heat stays outside, while the interior is protected from the bleaching effect of UV radia-tion.
Protection from wind and rain
If the awning is operated automatically, the use of a wind or rain sensor means that nothing will go wrong even when a storm blows up.
convenient roller shutter operation
everything is easier with a central control unit for roller shutters: just press one button, and all the roller shutters that are fitted with electrical drives will move. Or you can let it happen automatically – whenever you want.
energy saving
Thanks to an intelligent roller shutter controller you can save energy – for the air conditioning in sum-mer, for heating in winter.
6
7
4
3
2
1 Presence simulation
Depending on the system, occupancy can be simulated, moving the roller shutters according to a random rule, and switching the light on and off in line with a selected profile. If you now leave the house for several days, it will operate the lights and the shading control – just as if you were at home.
Flexible options for operation
Flexible operation of all the household equipment at various locations has many advantages, and not only for the elderly or sick. For example, all the lighting can be switched off, and all the roller shut-ters in the house can be controlled from certain points such as the front door or the bed.
Intrusion detection system
It detects an attempted break-in, switches the light on in the building, and raises or lowers the roller shutter. The potential intruder is deterred – even if you are not at home. Networked exterior cameras are triggered by a motion sensor to record persons, sending the image to a home server. The house-holder can therefore see what is happening on the television or over the Internet when out and about. At night the lighting is switched on at the same time as a deterrent.
Building automation
Open to everything
A system that can overcome the problems of
"individual solutions" is needed if the control informa-
tion is to be transmitted to all the building automation
components: it must ensure that all the components
communicate with one another using a common
language. Putting it briefly, a system that operates
independently of the manufacturer and of the
application, such as the KNX bus, is needed.
Good for your customers
comfort
Accessibility
energy efficiency
Safety
communication
Multimedia
energy Data
4
SMI – the engineering solution for roller shutters and sun protection
5
KNX network WITHOUT SMI drives
Switch cabinet with KNX actuators
electrical drives for roller shutters and sun
protection installations can also be integrated
into the KNX bus system with the standardised
SMI (Standard Motor Interface).
BecKer supplies tubular drives with integrated
SMI interfaces as well as the corresponding SMI
actuator. Planners, roller shutter and sun protec-
tion drive engineers, and electricians can offer
their end-customers a particularly economical
automation solution with this system concept.
This is because, thanks to the ability to connect
the drives in parallel, only one 5-core cable is re-
quired for the power supply and for bidirectional
data transmission between the SMI actuators
and the drives – the amount of wiring is reduced
significantly. every BecKer SMI actuator con-
trols up to eight drives; it supports all the stand-
ard SMI functions as well as additional functions
parameterised by BecKer.
Genuine bi-directional operation using the data supplied by the drive for status queries, detection of disconnection/broken cable, and signalling. A visual display based on true values. Exact positioning through incre-mental measurement of travel distance.
One cable for power supply and data exchange ensures perfect automation
I+Data linecolour black
I-2nd data linecolour grey
KNX network WITH SMI drives
Switch cabinet with SMI actuators
P5/16C PR+ SMI – P9/16C PR+ SMI Tubular drives with electronic limit switching for barrels from diameter 38 mm
Drive torque 5 / 9 Nm
Speed 16 min-1
Limit switch range 64 revolutions
rated Voltage 230 V Ac / 50 Hz
Mode S2 4 min
Degree of protection IP44
connecting cable c-Plug, p. 18
Every drive is subject to comprehensive series testing according to VDE guidelines on the series test beds specially developed for the purpose. This guarantees the highest possible quality of our products.
These drives – with a 5-core cable for power supply and data transmission – are also available with the SMI interface specially for KNX bus installations. Suitable accessory: the SMI actuator.
� changing direction of rotation via integrated switch � Stopping at any position � UP/DOWN travel � Step UP/DOWN function (2°– 510°/ 2° step) � Two fixed positions between top and bottom � Travel to the two intermediate positions from any
position of the shading solution (0 % –100 %) � Feedback of the current position (0 % –100 %) � Feedback of the motor status � Synchronous starting when drive command
issued
Roller shutter applications
Highlights
� Smooth, quiet running � Usable with or without anti-lifting device � Switches off automatically when blocked
(e.g. frozen curtain) � Automatic shading solution length adjustment � Supports parallel connection
SMI functions
Details
Operation possible without fixed stopsUniversal use in many shading solutions with or with-out stop systems. No increase in inventory require-ments through various drive types.
Usable for roller shutters with and without anti-lifting devicesNo increase in inventory requirements through vari-ous drive types.
Automatic shading solution length adjustment when stops are usedSame view with open roller shutters. No change in position from, e.g., temperature effects.
Automatic detection of anti-lifting devicesMakes a break-in more difficult by pressing down the roller shutter curtain.
Blockage detection if the end strip is frozen solidroller shutter curtains are protected from being damaged by overload.
easy, cost-saving cable layingInformation wires and power lines are integrated into one 5-core cable. Parallel connection facility permits linking from one drive to the next.
Suitable for left and right installation
Soft upper stopLow stress on the curtain and stop through continu-ous optimisation of the stop forces.
Motor head can be overwrappedUsable even in very restricted spaces.
Motor protected against overheatingTemperature monitor switches off when overheated to avoid damaging the motor or the shading solution.
High flexibilityHigh flexibility as cable plugs into various c-Plugs.
Technical data
Item number
Item designation
rated current
Power consumption
2009 120 502 0 P5/16c Pr+ SMI 0.36 A 85 W
2009 120 501 0 P9/16c Pr+ SMI 0.47 A 110 W
6
Drive adapter ring Manufacturer Name P5/20 – P13/9
Selve Drive adapter S40
ring S40
4930 300 083 0
4930 300 085 0
No illustration No illustration
Tube clamp for sus-pension springS40
4930 300 307 0
Selve Drive adapter S50
ring S50
Intermediate ring50x1.5
4930 300 121 0
4930 200 069 0
4930 300 102 0
Selve,Weisbender, Staffer,V. Müller
Drive adapter S60
ring S60
Intermediate ring 50x1.5
4930 300 041 0
4930 020 707 2
4930 300 102 0
SMI – recommended mechanical accessories for roller shutter applications
29 mm
48 mm6,4
mm
Wall bracket with catch for mini strip � Drives for roller shutters r7/17 – r20/17
Item no. 4930 300 382 0
Mini strip M6/48 incl. screws � Drives for roller shutters and sun protection P5/16 – P13/9
Item no. 4930 200 232 0
24,7
5
See the tubular drives product catalogue for further mechanical accessory components.
Wall bracket with catch
Mini strip-P c-Plug
Octagonal shaft
8kt SW 50
12
8kt S
W 5
4
17
13,5
7
Drive torque 8 / 12 / 20 / 30 / 37 Nm
Speed 17 min-1
Limit switch range 64 revolutions
rated Voltage 230 V Ac / 50 Hz
Mode S2 4 min
Degree of protection IP44
connecting cable c-Plug, p. 18
Item number
Item designation
rated current
Power consumption
2010 120 501 0 r8/17c Pr+ SMI 0.50 A 115 W
2010 120 502 0 r12/17c Pr+ SMI 0.53 A 125 W
2020 120 501 0 r20/17c Pr+ SMI 0.77 A 175 W
2030 120 501 0 r30/17c Pr+ SMI 0.96 A 225 W
2040 120 501 0 r40/17c Pr+ SMI 1.18 A 230 W
� changing direction of rotation via integrated switch � Stopping at any position � UP/DOWN travel � Step UP/DOWN function (2°– 510°/ 2° step) � Fixed position between top and bottom � Travel to any 2 fixed positions (0 % –100 %) � Feedback of the current position (0 % –100 %) � Feedback of the motor status (including error
report) � Synchronous starting when drive command
issued
Roller shutter applications
Highlights
R8/17C PR+ SMI – R40/17C PR+ SMI Tubular drives with electronic limit switching for barrels from diameter 50 mm
� Smooth, quiet running � Usable with or without anti-lifting device � Switches off automatically when blocked
(e.g. frozen curtain) � Automatic shading solution length adjustment � Supports parallel connection
SMI functions
Details
Technical data
Operation possible without fixed stops Universal use in many shading solutions with or with-out stop systems. No increase in inventory require-ments through various drive types.
Usable for roller shutters with and without anti-lifting devices No increase in inventory requirements through various drive types.
Automatic shading solution length adjustment when stops are used Same view with open roller shutters. No change in position from, e.g., temperature effects.
Automatic detection of anti-lifting devices Makes a break-in more difficult by pressing down the roller shutter curtain.
Blockage detection if the end strip is frozen solid roller shutter curtains are protected from being damaged by overload.
easy, cost-saving cable layingInformation wires and power lines are integrated into one 5-core cable. Parallel connection facility permits linking from one drive to the next.
Suitable for left and right installation
Soft upper stop Low stress on the curtain and stop through continu-ous optimisation of the stop forces.
Motor head can be overwrapped Usable even in very restricted spaces.
Motor protected against overheating Temperature monitor switches off when overheated to avoid damaging the motor or the shading solution.
High flexibility High flexibility as cable plugs into various c-Plugs.
Every drive is subject to comprehensive series testing according to VDE guidelines on the series test beds specially developed for the purpose. This guarantees the highest possible quality of our products.
These drives – with a 5-core cable for power supply and data transmission – are also available with the SMI interface specially for KNX bus installations. Suitable accessory: the SMI actuator.
8
Drive adapter ring Manufacturer Name r8/17 – r50/11
Selve Drive adapter S50
ring S50
4930 300 121 0
4930 300 122 0
Selve,Weisbender, Staffer,V. Müller
Drive adapter S60L
ring S60L
4930 300 466 0
4930 300 465 0
SHG Drive adapter M60
ring M60
4930 300 043 0
4930 050 701 0
Drive adapter rOLM60
ring rOLM60
4930 300 044 0
4930 300 037 0
Selve, SHG,Weisbender, eckermann
Drive adapter SM70
ring SM70
4930 300 045 0
4930 000 607 0
See the tubular drives product catalogue for further mechanical accessory components.
SMI – recommended mechanical accessories for roller shutter applications
Universal wall bracket for mounting pin 3/20 and connecting piece diameter 20 mm
� Drives for roller shutters r7/17 – r40/17
Item no. 4930 200 005 0
Mounting pin 3/20 (round, d = 20 mm) � Drives for roller shutters and sun protection
r7/17 – r50/11
Item no. 4930 200 028 0
Universal wall bracket
Mounting pin 3/20
Octagonal shaft
9
� changing direction of rotation via integrated switch � Stopping at any position � UP/DOWN travel � Step UP/DOWN function (2°– 510°/ 2° step) � Fixed position between top and bottom � Travel to any 2 fixed positions (0 % –100 %) � Feedback of the current position (0 % –100 %) � Feedback of the motor status
(including error report) � Synchronous starting when drive command
issued
Sun protection applications
Highlights
P5/20C PS SMI – P9/16C PS SMI Tubular drives with electronic limit switching for barrels from diameter 38 mm
� Smooth, quiet running � Automatic shading solution length adjustment � Supports parallel connection � Optimum adjustment of the closing force � Universally applicable
SMI functions
Technical data
Drive torque 3 / 5 / 9 Nm
Speed 16 / 20 / 30 min-1
Limit switch range 64 revolutions
rated Voltage 230 V Ac / 50 Hz
Mode S2 4 min
Degree of protection IP44
connecting cable c-Plug, p. 18
Item number
Item designation
rated current
Power consumption
2009 130 504 0 P3/30c PS SMI 0.36 A 85 W
2009 130 502 0 P5/20c PS SMI 0.36 A 115 W
2009 130 503 0 P5/30c PS SMI 0.47 A 115 W
2009 130 501 0 P9/16c PS SMI 0.47 A 110 W
Operation possible without fixed stops Universal use in many shading solutions with or without stop systems. No increase in inventory requirements through various drive types.
Automatic shading solution length adjustment when stops are used elongation of the cloth as a result of temperature changes or ageing is automatically compensated for. The installation does not have to be readjusted.
Optimum adjustment of the closing force Protection of the cloth and the seams through con-tinuous optimisation of the closing forces.
Universally applicable for many shading systems No increase in inventory requirements from many variants.
easy, cost-saving cable layingInformation wires and power lines are integrated into one 5-core cable. Parallel connection facility permits linking from one drive to the next.
Suitable for left and right installation
Motor head can be overwrapped Usable even in very restricted spaces.
Motor protected against overheating Temperature monitor switches off when overheated to avoid damaging the motor or the shading solution.
Blockage detection Switches off when blocked to protect the system.
High flexibilityHigh flexibility as cable plugs into various c-Plugs.
Details
Every drive is subject to comprehensive series testing according to VDE guidelines on the series test beds spe-cially developed for the purpose. This guarantees the highest possible quality of our products.
These drives – with a 5-core cable for power supply and data transmission – are also available with the SMI interface, specially for KNX bus installations. Suitable accessory: the SMI actuator.
10
Drive adapter ring Manufacturer Name Shaft diameter P5/20 – P13/9
Benthin L rollers Drive adapter
ring S50
Wall bracket
52/62 mm
52/62 mm
4930 300 442 0
4930 300 443 0
4930 300 432 0
Drive adapter40x1 / 42x2
ring 40x1 / 42x2
40/42 mm
40/42 mm
4930 300 086 0
4930 300 087 0
Helioscreen Drive adapter 47x2
ring 47x2
47 mm
47 mm
4930 300 305 0
4930 300 306 0
SMI – recommended mechanical accessories for sun protection applications
Awning bracket with star for mounting pins 1/10 and 2/10 and connecting piece diameter 10 mm
� Drives for sun protection r7/17 – r50/11
Item no. 4930 300 053 0
connecting piece incl. screws, 4-sided, 10 mm � Drives for roller shutters and sun protection P5/16 – P13/9
Item no. 4930 200 140 0
Awning bracket
connecting piece
Interior shading fastening system for PIcO SMI drives
Ø 47,5
Ø 3
6,9
60°65°
3,1
19,5
17Ø 47,5
Ø 5
0
3,1
65°
60°
3027
11
Drive adapter ring Manufacturer Name P5/20 – P13/9
Drive adapter 50x2
ring 50x2
4930 300 103 0
4930 300 104 0
SMI – recommended mechanical accessories for sun protection applications
Drive adapter ring Manufacturer Name P5/20 – P13/9
Drive adapter 38x1 / 40x2
4930 300 088 0
Drive adapter 40x1 / 42x2
ring 40x1 / 42x2
4930 300 086 0
4930 300 087 0
Drive adapter40x1.3 / 40x1.5
ring40x1.3 / 40x1.5
4930 300 195 0
4930 300 196 0
round tube
Grooved shaft
12
13
� changing direction of rotation via integrated switch � Stopping at any position � UP/DOWN travel � Step UP/DOWN function (2°– 510°/ 2° step) � Fixed position between top and bottom � Travel to any 2 fixed positions (0 % –100 %) � Feedback of the current position (0 % –100 %) � Feedback of the motor status
(including error report) � Synchronous starting when drive command
issued
Sun protection applications
Highlights
R8/17C PS SMI – R50/11C PS SMI Tubular drives with electronic limit switching for barrels from diameter 50 mm
SMI functions
Details
� Smooth, quiet running � Automatic shading solution length adjustment � Supports parallel connection � Optimum adjustment of the closing force � Universally applicable
Technical data
Drive torque 8 / 12 / 20 / 30 / 40 / 50 Nm
Speed r8 – r40 17 min-1/ r50 11 min-1
Limit switch range 64 revolutions
rated Voltage 230 V Ac / 50 Hz
Mode S2 4 min
Degree of protection IP44
connecting cable c-Plug, p. 18
Item number Item designation rated current
Power consumption
2010 130 501 0 r8/17c PS SMI 0.50 A 115 W
2010 130 503 0 r12/17c PS SMI 0.53 A 125 W
2020 130 501 0 r20/17c PS SMI 0.77 A 175 W
2030 130 501 0 r30/17c PS SMI 0.96 A 225 W
2040 130 501 0 r40/17c PS SMI 1.18 A 230 W
2050 130 501 0 r50/11c PS SMI 1.10 A 255 W
2010 130 502 0 r8/17c PS+ SMI 0.50 A 115 W
2010 130 504 0 r12/17c PS+ SMI 0.53 A 125 W
2020 130 502 0 r20/17c PS+ SMI 0.77 A 175 W
2030 130 502 0 r30/17c PS+ SMI 0.96 A 225 W
2040 130 502 0 r40/17c PS+ SMI 1.18 A 230 W
2050 130 502 0 r50/11c PS+ SMI 1.10 A 225 W
Every drive is subject to comprehensive series testing according to VDE guidelines on the series test beds specially developed for the purpose. This guarantees the highest possible quality of our products.
Operation possible without fixed stops Universal use in many shading solutions with or without stop systems. No increase in inventory requirements through various drive types.
Automatic shading solution length adjustment when stops are used elongation of the cloth as a result of temperature changes or ageing is automatically compensated for. The installation does not have to be readjusted.
Optimum adjustment of the closing force Protection of the cloth and the seams through con-tinuous optimisation of the closing forces.
Higher closing force for cassette awnings (PS+)Avoids soiling the cloth through open cassette.
Universally applicable for many shading systems No increase in inventory requirements from many variants.
easy, cost-saving cable layingInformation wires and power lines are integrated into one 5-core cable. Parallel connection facility permits linking from one drive to the next.
Suitable for left and right installation
easy limit position adjustment Setting the limit position conveniently from the ground without having access to the drive.
Mounting pin can be mounted easily Mounting pin can be mounted and removed without use of a tool.
High flexibility High flexibility as cable plugs into various c-Plugs.
These drives – with a 5-core cable for power supply and data transmission – are also available with the SMI interface specially for KNX bus installations. Suitable accessory: the SMI actuator.
14
SMI – recommended mechanical accessories for sun protection applications
Awning bracket with star for mounting pins 1/10 and 2/10and connecting piece with 10 mm diameter
� Drives for sun protection r7/17 – r50/11
Item no. 4930 300 053 0
Mounting pin 2/10 (4-sided, 10 mm) � Drives for roller shutters and sun protection r7/17 –
r50/11
Item no. 4930 200 030 0
Awning bracket
Mounting pin 2/10
Grooved shaft
Drive adapter ring Manufacturer Name r8/17 – r50/11
Drive adapter 63N plastic up to 25 Nm
4930 300 084 0*
Drive adapter 63N diecast
ring 63N
4930 300 052 0
4930 300 415 0
Drive adapter DW74N
ring DW74N
4930 300 056 0
4930 010 707 2
Drive adapter DW78r+F diecast
ring DW78r+F
4930 300 091 0
4930 300 033 0
Drive adapter DW85N only up to 30 Nm
Diecast drive adapter for 40 and 50 Nm
ring DW85N
4930 300 065 0
4930 300 410 0
4930 300 066 0
See the tubular drives product catalogue for further mechanical accessory components. * r8/17-r20/17
17
Ø65,5
Ø60,5
R4
3026,5
15
� changing direction of rotation via integrated switch � Stopping at any position � UP/DOWN travel � Step UP/DOWN function (2°– 550°/ 2° step) � Fixed position between top and bottom � Travel to any 2 fixed positions (0 % –100 %) � Feedback of the current position (0 % –100 %) � Feedback of the motor status
(including error report) � Synchronous starting when drive command
issued
Sun protection applications
Highlights
L50/17C PS SMI – L120/11C PS SMI Tubular drives with electronic limit switching for barrels from diameter 63 mm
SMI functions
Details
� Smooth, quiet running � Automatic shading solution length adjustment � Supports parallel connection � Optimum adjustment of the closing force � Universally applicable
Technical data
Drive torque 50 / 60 / 70 / 80 / 120 Nm
Speed L50 and L70 17 min-1 L60, L80 and L120 11 min-1
Limit switch range 64 revolutions
rated Voltage 230 V Ac / 50 Hz
Mode S2 4 min
Degree of protection IP44
connecting cable c-Plug, p. 18
Itemnumber
Itemdesignation
ratedcurrent
Power consumption
2050 130 503 0 L50/17c PS SMI 1.40 A 315 W
2060 130 501 0 L60/11c PS SMI 1.20 A 265 W
2070 130 501 0 L70/17c PS SMI 1.90 A 430 W
2080 130 501 0 L80/11c PS SMI 1.40 A 310 W
2120 130 501 0 L120/11c PS SMI 1.90 A 435 W
2050 130 504 0 L50/17c PS+ SMI 1.40 A 315 W
2060 130 502 0 L60/11c PS+ SMI 1.20 A 265 W
2070 130 501 0 L70/17c PS+ SMI 1.90 A 430 W
2080 130 502 0 L80/11c PS+ SMI 1.40 A 310 W
2120 130 502 0 L120/11c PS+ SMI 1.90 A 435 W
Operation possible without fixed stops Universal use in many shading solutions with or without stop systems. No increase in inventory requirements through various drive types.
Automatic shading solution length adjustment when stops are used elongation of the cloth as a result of temperature changes or ageing is automatically compensated for. The installation does not have to be readjusted.
Optimum adjustment of the closing force Protection of the cloth and the seams through con-tinuous optimisation of the closing forces.
Higher closing force for cassette awnings (PS+) Avoids soiling the cloth through open cassette.
Universally applicable for many shading systems No increase in inventory requirements from many variants.
easy, cost-saving cable layingInformation wires and power lines are integrated into one 5-core cable. Parallel connection facility permits linking from one drive to the next.
Suitable for left and right installation
easy limit position adjustment Setting the limit position conveniently from the ground without having access to the drive.
Mounting pin can be mounted easily Mounting pin can be mounted and removed without use of a tool.
High flexibility High flexibility as cable plugs into various c-Plugs.
Every drive is subject to comprehensive series testing according to VDE guidelines on the series test beds specially developed for the purpose. This guarantees the highest possible quality of our products.
These drives – with a 5-core cable for power supply and data transmission – are also available with the SMI interface specially for KNX bus installations. Suitable accessory: the SMI actuator.
16
Drive adapter ring Manufacturer Name L44/14 – L120/11
Drive adapter DW 78x1
ring DW78x1
4931 300 079 0
4931 210 707 1
Drive adapter DW78N, 4 mm centre offset
ring DW78N,4 mm centre offset
4931 300 086 0
4931 230 707 0
Diecast drive adapter for 40 and 50 Nm
ring DW 85N
4931 300 078 0
4931 300 227 0
See the tubular drives product catalogue for further mechanical accessory components.
SMI – recommended mechanical accessories for sun protection applications
Awning bracket with star M8 for mounting pins 1/16, 2/16 and 4/16
� Drives for sun protection L44/14 – L120/11
Item no. 4931 300 209 0
Mounting pin 2/16 (4-sided, 16 mm) � Drives for roller shutters and sun protection L44/14 – L120/11
Item no. 4931 200 034 0
Awning bracket
Mounting pin 2/16
Grooved shaft
Ø 7530
29
Ø 75
19,2
14
4 4
145552
Ø 75,5
Ø 8
0
17
Plug-in connecting cable
connecting cable (m)
Item number
with wire end ferrules
1 2010 270 612 0
2 (Standard) 2010 270 605 0
3 2010 270 649 0
5 2010 270 614 0
10 2010 270 615 0
with Hirschmann plug type STAS 4N incl. securing clip, SMI
0.5 2010 270 616 0
2 2010 270 617 0
5 2010 270 618 0
Plug-in BECKER connecting cable 5-core for SMI drives
Details
Available versions
High flexibility as connecting cable plugs into various c-Plugs.
Our service: To make things easier for you, the 5-core SMI c-Plug plug-in connecting cables are delivered pre-mounted on the drives (plugged in). 6 adhesive labels are attached to the connecting cables with the SMI Key ID of the respective drive, as plain text for documen-tation purposes and as a barcode for detection by scanners.
They can easily be dismantled on site if a different connecting cable is needed according to the circum-stances when installing.
No screw connection is necessary, thereby simpli-fying mounting and disassembly
Drive head can be overwrapped
Degree of protection IP44
Only a conventional terminal screwdriver with a narrow blade is needed for mounting/dismantling the drive cable
White cables enable unobtrusive integration, even in visible areas.
UV-resistant rubber cable
Black cable allows unobtrusive integration amongst dark or black elements.
Dismantling the cable when fitted into the roller shutter box is usually possible (depending on the installation position)
Every drive is subject to comprehensive series testing according to VDE guidelines on the series test beds specially developed for the purpose. This guarantees the highest possible quality of our products.
These drives – with a 5-core cable for power supply and data transmission – are also available with the SMI interface specially for KNX bus installations. Suitable accessory: the SMI actuator.
18
Dismantling with c-Plug tool
1.
2.
Dismantling side
Terminal screw-driver with narrow blade
click
Locating lug Locating latch
Mounting with c-Plug tool
Mounting side
c-Plug tool
1.
2.
Dismantling with a terminal screwdriver
Item no. 2010 300 365 0
� One side for mounting � One side for dismantling � Secure engagement and release of the c-Plug con-
nector � easy and reliable application of the c-Plug tool
through guidance along the connecting cable � For drives with tube diameters 45 and 58 mm
Tool
Mounting with a terminal screwdriver
19
� 2 m mains cable � 2.8 m drive connecting cable with 5-way
push-in terminal or 0.3 m cable with Hirschmann coupling
SMI – actuators and accessories
Details
Details
Becker-kNX/SMI actuator(roller shutter, sun protection and blind actuator) 8-way, reG 2Te/rail mounting assembly
� KNX/SMI actuator to control up to 8 SMI drives, connectable over just one ring cable, e.g. 5 x 1.5 mm². With genuine, active position determination through bidirectional drive feedback.
� compatible with KNX. Bus connection via KNX bus connection terminal.
� Mains and SMI drive cables connected via screw terminals
Technical data
Technical data
Item no. 4002 000 003 0
Item no. 4935 200 034 0
rated Voltage 230 V Ac / 50 Hz
eIB operating voltage via BUS 21–32 V=
Degree of protection IP 20
Permissible ambient temperature
-5 to +45 °c
Type of mounting reG 2Te / rail mounting
colour grey
Dimensions (W x H x D) 36.5 x 90 x 58.5 mm
Installed height above the mounting rail
53.5 mm
cord switch adjustment setfor commissioning SMI drives
Mains connection 230 V / 50 Hz
Degree of protection IP 20
capacity 5 A
cable colour black
20
SMI connecting terminal
Item no. 4002 000 004 0
Item no. 4816 050 000 5
Becker USB SMI tool
requirements
� computer with Windows 98, 2000 or XP or higher operating system
� USB interface � Downloadable "SMI easyMonitor" software
21
SMI – software and tools
Details
SMI Hirschmann set consisting of:
Hirschmann plug STAS 4 N, black
Item no. 4809 002 002 0
Hirschmann coupling STAK 4 N, black
Item no. 4809 002 003 0
Securing clip STASI 4
Item no. 4809 004 000 1
components can be ordered individually
22
requirements
requirements
Functions
Functions
SMI-/kNX software tool
This tool establishes communication from the Pc via the bus coupler to the actuator. The eTS must be in "offline mode" with respect to the KNX bus for this purpose. Searching the SMI bus for the drives con-nected to the respective actuator is supported.The SMI drives are identified and clearly presented for diagnostics and service. Adjustments and drive commands (individual and grouped) can be carried out on site.
� computer with Windows 98, 2000 or XP or higher operating system
� BecKer KNX/SMI actuator 4002 000 003 0 � Software can be downloaded free from
the homepage � requirement: rS232 interface on the Pc
� Identification of the manufacturer code � Identification of the KeY-ID � Assignment of a slave address � commands: UP/DOWN/STOP/STeP-UP/STeP-DOWN
"SMI easyMonitor" allows the bus function of the installation to be checked easily (knowledge of the higher-level building system is not necessary). It is necessary to disconnect the bus connector from the KNX side of the actuator for this purpose.
SMI easyMonitor
� computer with Windows 98, 2000 or XP or higher operating system
� USB interface � BecKer USB SMI tool 4002 000 004 0 � can be downloaded free from the homepage
� Identification of the manufacturer code � Identification of the KeY-ID � Assignment of a slave address � commands: UP/DOWN/STOP/STeP-UP/STeP-DOWN
23
Load
tab
le f
or r
olle
r sh
utte
rs a
nd
sun
pro
tect
ion
dri
ves
Sha
ft d
iam
eter
(mm
)40
5050
6060
7078
8510
812
5
rol
ler
shut
ter
heig
ht (m
)1.
42.
21.
42.
21.
42.
21.
42.
21.
42.
21.
42.
21.
42.
21.
42.
22.
23.
02.
23.
0
Pro
file
thic
knes
s (m
m)
88
88
1414
88
1414
1414
1414
1414
1919
1919
Type
Nm
/rpm
-1
P3/
303/
309
88
77
67
76
5-
--
--
--
--
-
P5/
165/
1615
1313
1211
912
1110
9-
--
--
--
--
-
P5/
205/
2015
1313
12-
-12
1110
9-
--
--
--
--
-
P5/
305/
3015
1313
12-
-12
1110
9-
--
--
--
--
-
P9/
169/
1627
2325
22-
-22
2020
17-
--
--
--
--
-
P13
/913
/938
3335
31-
-31
29-
--
--
--
--
--
-
r8/
178/
17-
-22
1918
1520
1817
1516
1515
1415
13-
--
-
r12
/17
12/1
7-
-33
2927
2330
2726
2324
2223
2122
20-
--
-
r20
/17
20/1
7-
-55
4944
3850
4543
3841
3739
3537
34-
--
-
r30
/17
30/1
7-
-83
73-
-75
6864
5761
5558
5356
50-
---
-
r40
/17
37/1
7-
-10
291
--
9385
7970
7568
7265
6962
--
--
r50
/11
50/1
1-
-13
912
3-
-12
511
410
794
102
9297
8894
84-
--
-
L44/
1444
/14
--
--
--
--
--
9081
8577
8274
6663
6157
L60/
1160
/11
--
--
--
--
--
122
111
116
106
112
101
8379
7872
L80/
1180
/11
--
--
--
--
--
163
148
156
141
150
135
1110
610
498
L120
/11
120/
11-
--
--
--
--
-24
522
223
321
122
520
216
715
915
614
5
The
tens
ile lo
ad fi
gure
s ar
e gu
idel
ines
for s
ingl
e-pi
ece
rolle
r shu
tter c
urta
ins.
The
fric
tion
typi
cal f
or ro
ller s
hutte
rs h
as b
een
take
n in
to a
ccou
nt!
exam
ple:
Sha
ft d
iam
eter
60
mm
, pro
file
thic
knes
s 14
mm
, 23
kg c
urta
in w
eigh
t, ro
ller s
hutt
er h
eigh
t 2.2
0 m
= r
12/1
7Te
nsile
load
figu
res
in k
g
for
SM
I dri
ve t
ypes
: P
S,
PS
+,
PR
, P
R+
24
Load
tab
le f
or a
wni
ng d
rive
sA
ssum
pti
on:
78 m
m s
haft
dia
met
er,
20° d
rop
ang
le
Dri
ve to
rque
(Nm
) dep
endi
ng o
n dr
op le
ngth
s (m
)
2m2.
5m3m
3.5m
4m4.
5m5m
Num
ber
of a
rms
Wid
th (m
)Ty
pe r
Type
LTy
pe r
Type
LTy
pe r
Type
LTy
pe r
Type
LTy
pe r
Type
LTy
pe r
Type
LTy
pe r
Type
L
23.
030
4430
4430
X40
X50
4450
4450
44
24.
530
4430
4440
X40
X50
4450
4450
44
26.
030
4440
4440
X40
X50
4450
4450
44
34.
540
4440
4450
4450
60X
80X
80X
80
36.
040
4440
4450
4450
60X
80X
80X
80
37.
540
4440
4450
4450
60X
80X
80X
80
46.
050
6050
60X
60X
80X
120
X12
0X
120
47.
550
6050
60X
60X
80X
120
X12
0X
120
49.
050
6050
60X
60X
80X
120
X12
0X
120
Bec
ker d
oes
not a
ccep
t any
resp
onsi
bilit
y fo
r the
acc
urac
y of
info
rmat
ion.
Due
to th
e la
rge
num
ber o
f diff
eren
t br
ands
/mod
els
and
the
corr
espo
ndin
g va
riety
in d
rive
pow
er re
quire
men
ts, t
he N
m d
ata
prov
ided
are
non
-bin
ding
an
d in
tend
ed a
s a
guid
elin
e on
ly.
for
SM
I dri
ve t
ypes
: P
S,
PS
+
25
Standard conditions of sale
Note: Please ask for the updated General Terms and conditions with our local subsidiary/representatives in your country as these may be different from those hereunder.
26
27
8/20
12 4
995
802
145
0
BecKer-Antriebe GmbH
Drives and control units for roller shutters, sun protection and doors
Friedrich-ebert-Strasse 2 – 4 35764 Sinn, Germany
Tel.: +49 (0) 27 72 / 507-0 Fax: +49 (0) 27 72 / 507-151
[email protected]. becker-antriebe.com
A good feeling …
... something on which, with
BecKer, not only your customers
but also you can rely. Because
we share one goal: to inspire
people through innovative
products and expert service.
And that's just easier done together.
With Becker.
Item number 4995 802 145 1 © psv marketing