MANUAL AND AUTOMATIC BARREL PLATING SYSTEMS HBS Equipment Corp., La Mirada, Calif HBS Equipment offers a complete line of manual and automatic barrel plating systems. These rood- ular systems are offered in both open or fully enclosed versions and can be designed to accom- modate barrel sizes ranging Dom less than 4 × 5 in. up to 24 × 48 in. Systems are constructed using nonmetallic components to eliminate corro- sion problems and are available with a wide range of options and process computer controls. Systems can also incorporate wet or dry unloaded stations, designed to handle delicate components suscepti- ble to scratching or other offloading related problems. All HBS barrel plating lines offer built-in spill containment, a unique raised rear exhaust plenum, easy access to all components, and other state-of-the-art control features. Circle 157 on reader information card THIN-WALL PLATING BARREL Whyco Technol~h~ies Inc., Thoma,~ton, Conn. Whyco Chromium Co. Inc. otters a technically innovative plating barrel featuring a patented highly strengthened thin-wall design that allows for extremely thst solution transfer and increased plating efficiency, which results in up to 60~/~ barrel drag-out reduction and up to 40¢~ increased plating speed. Circle 159 on reader information card AUTOMATION FOR BARREL PLATERS Plasfab, Warwick, R.I. Plasfab is offering a variety of Fail-Safe Ball Screw Tracker Hoists with rack and gear horizon- tal drive, encoder-based positioning, and AC fre- quency drives, ranging from 100 to 500 lb in side arm and up to 1,000 lb in an overhead configura- tion. Match one of these hoists with any one of three levels of Director controllers starting with the low-cost, switch-selectable, multiprocess-base systems, up to the "Fully Enhanced" centralized control, 486 color touch-screen system that offers random access loading, dynamic scheduling, SPC reporting, and more. Circle 158 on reader information card • G 6/teta I" I'~"ri I'5 rl I"11 (:~

Manual and automatic barrel plating systems

Download PDF Report

Upload
dokhanh
View
220
Download
1

Embed Size (px)

Citation preview

Page 1: Manual and automatic barrel plating systems

Circle 157 on reader information card

T H I N - W A L L P L A T I N G BARREL Whyco Technol~h~ies Inc., Thoma,~ton, Conn.

Whyco Chromium Co. Inc. otters a technically innovative plating barrel featuring a patented highly s t rengthened thin-wall design that allows for extremely thst solution t ransfer and increased plating efficiency, which results in up to 60~/~ barrel drag-out reduction and up to 40¢~ increased plating speed.

Circle 159 on reader information card

A U T O M A T I O N FOR BARREL P L A T E R S Plasfab, Warwick, R.I.

Plasfab is offering a variety of Fail-Safe Ball Screw Tracker Hoists with rack and gear horizon- tal drive, encoder-based positioning, and AC fre- quency drives, ranging from 100 to 500 lb in side arm and up to 1,000 lb in an overhead configura- tion. Match one of these hoists with any one of three levels of Director controllers s tart ing with the low-cost, switch-selectable, multiprocess-base systems, up to the "Fully Enhanced" centralized control, 486 color touch-screen system that offers random access loading, dynamic scheduling, SPC reporting, and more.

Circle 158 on reader information card

• G 6 / t e t a I" I'~ "r i I'5 rl I"11 (:~