Manual for DSS - FSIfsi.nic.in/uploads/documents/dss-manual-11-4-15.pdf · Manual for DSS Decision Support ... - Manual Case-1 Logging in into Decision Support System: ... Browse

Page | 1

Manual for DSS

Decision Support System

www.fsigeoportal.gov.in/fsidss2

Forest Survey of India

Decision Support System (www.fsigeoportal.gov.in/fsidss2)- Manual

Table of Contents

Case-1 Login page 1

Case-2 Search Layer tool 3

Case-3 Legend Tool 4

Case-4 Layer list tool 4

Case-5 Draw and Measure Too 5

Case-6 Identity Tool 7

Case-7 Print Tool 8

Case-8 Load Polygon 8

Case-9 Select Polygon 10

Case-10 Get hydrological Info 12

Case-11 Get VDF One Sq. KM 13

Case-12 Get Last Remnants FTM 13

Case-13 Get Protected Area Information 14

Case-14 Get Wildlife habitat Information 14

Case-15 Get Land Cover 15

Case-16 Get Grid 16

Case-17 Get Forest Cover Map 17

Case-18 Get Forest Type Map 18

Case-19 Get Biological richness 18

Case-20 Get Landscape Integrity 19

Case-21 Get Final Result 19

Case-22 Get FCM Result 20

Case-23 Get FTM Result 21

Case-24 Get Biological richness Result 21

Case-25 Get Landscape Integrity Result 22

Case-26 Get DSS Result 22

Case-27 Get FCM without Grid 23

Case-28 Get FTM without Grid 24

Case-29 Get FCM without Grid Result 24

Case-30 Get FTM without Grid Result 25

Case-31 Get NPV Information 25

Case-32 Get NPV Result 26


Acronyms and Abbreviations

DSS: Decision Support System

PA: Protected Area

RFA: Recorded Forest Area

TR: Tiger Reserve

FCM: Forest Cover Map

FTM: Forest Type Map

BR: Biological Richness

LI: Landscape Integrity

VDF: Very Dense Forest

NPV: Net Present Value


Case-1 Logging in into Decision Support System:

Type http:// www.fsigeoportal.gov.in/fsidss5km in the address bar of the browser

Login using the user name, password and employee ID. If you don’t have user and

password, get the same from your state nodal officer

Enter User Name, Password and Employee ID in the space provided.

You have to provide your username and password then Login in the page by clicking

the login button on the bottom of the screen.

After login, you will find the displayed page

Page 1


Click on the x icon to close it

Page 2


Click on each of the icon and browse various options before the start of the actual work

Case-2 Search Layer Tool:

You can search the States and districts on the basis of your requirement.

User selects state from State’ Dropdown

User selects district from ‘District’ Dropdown

Page 3


Case-3 Legend Tool:

User clicks on ‘Legends Tool’ icon and can view the following legend which are being

used in this application.

Case-4 Layer List Tool:

User clicks on ‘Layer List Tool’ icon.

User selects/unselects any of the checkbox

Page 4


Case-5 DRAW & MEASURE TOOL:

User clicks on ‘Draw and Measure Tool’ icon

Draw and Measure (Line):

Page:5


User clicks on ‘Line’ icon

User selects line color from ‘Line Color’ color picker

User selects style

User enters line width

User selects alpha.

User selects ‘Show Measurement’ checkbox.

User selects measuring units from ‘Distance Units’ Dropdown.

Draw line on map.

*Measured distance is displayed on the widget

Draw and Measure (Polygon):

User clicks on ‘Polygon’ icon.

User selects color from ‘Fill Color’ color picker.

User selects style.

User selects outline color from ‘Outline’ color picker.

User enters width.

User selects alpha.

User selects ‘Show Measurement’ checkbox.

User selects area units from ‘Area Units’ Dropdown.

User selects distance units from ‘Distance Units’ Dropdown.

Draw polygon on map.

Page:6


Draw and Measure (Text):

User clicks on ‘Add Text’ icon

User selects Font, color and size

User type text on the text box

Care-6 Identify Tool:

User clicks on ‘Identify’ Tool and click on any feature on map.

Page:7


Case-7 Print Tool:

User clicks on ‘Print’ Tool

User enters title in ‘Title’ Textbox.

User clicks on ‘Print Preview’ Button.

User clicks on ‘Print’ or ‘PDF’ Button.

Case-8 Load Polygon:

Click on ‘Load Polygon’ Button.

Click on ‘Vertex Polygon’ icon and or Draw free hand polygon, draw polygon on map and

click on ‘Create Polygon’ Button

*Features beneath the area where polygon is drawn are selected. Page:8


Load Shape file:

Click on ‘Load Local Shape File’ Button

Note:

a. The file should be in zip format the zip file should contain three files (.shp, .prj, .dbo).

b. The projection of the file should be matches with the application projection.

Page:9


Browse to the location of the zipped file, select it and open it.

Note: Features beneath the area where shape file is loaded are selected

Create Polygon using Lat Long:

Click on ‘Create Polygon Using Lat, Long.

Enter latitude in ‘Lat’ Textbox.

Enter longitude in ‘Long’ Textbox.

Click on ‘Add Point’ Button.

Note:

a. Added point should display in grid.

b. Click on ‘Add Polygon’ Button.

c. At least two x, y value should be added in grid for creating line on map.

d. At least four x, y value should be added in grid for creating line on map.

e. Features beneath the polygon or polyline get selected on map (Fig 32).

Select any row in a grid and click on ‘Remove Point’ Button to remove selected point

from the grid.

Click on ‘Clear All Point’ Button to clear all point loaded in grid.

Case-9 Select Polygon:

Click on ‘Select Polygon’ Button

Select polygon from dropdown.

Page:10


If Buffer distance is required then select ‘Show Shortest Distance’ Checkbox.

Enter ‘Buffer Distance’ to include area within the polygon for generating report.

Note: It will show nearest PA,TR, Tiger Corridors, RFA from the polygon boundary

User can also visualize the polygon on Google earth imagery by converting the shape file

to KML format option given above.

Page:11


Decision Rule 1

If the Polygon falling on any of the layer of Decision Rule 1, shall be classified as

inviolate irrespective of the value of other parameters

Case-10 Get hydrological Info

User click on ‘Get hydrological Info’

Hydrological layer consists of Major rivers, 250 meter distance from banks of

the perennial streams and boundary of important wetland (having area more

than 10 hectares) & storage reservoirs of water supply/irrigation/hydro power

projects/multi-purpose projects.

Page:12


Case-12 Get Last Remnants FTM

User click on ‘Last Remnants FTM’

Case-11 Get VDF One Sq. KM

User click on ‘VDF One Km’

Page:13


Case-13 Get Protected Area Information

User click on ‘Protected Area Info’

Protected Areas info includes National Parks and Wildlife Sanctuaries, areas

located within 1 km distance from boundary of Protected Areas, Tiger

Reserves, area falling in the identified tiger corridors.

Case-14 Get Wildlife habitat Information

User click on ‘Wildlife Info’

Page:14


Get Land Cover/Forest Cover

Case-15 Get Land Cover:

Click on ‘Get Land cover’ Button

Click on ‘Get Result Table’ Button.

Note: Report table displays land cover beneath the projected area.

Click on ‘Save Result Table’ Button to save result in XLS format.

Page:15


Case-16 Get Grids:

Click on ‘Get Grid’ Button

User gets the 1 Km x 1Km grids of the polygon.

Page:16


User select the check box of ‘Analysis based on 50% rule’ Button for 50% criteria

Case-17 GET FOREST COVER MAP(FCM):

Click on ‘Get FCM’ Button

Legends displayed in left side corner of the screen

Page:17


Case-18 GET FOREST TYPE MAP(FTM):

Click on ‘Get FTM’ Button


Case-19 GET BIOLOGICAL RICHNESS (BR):

Click on ‘Get Biological Richness’ Button


Page:18


Case-20 GET LANDSCAPE INTEGRITY (LI):

Click on ‘Get Landscape Integrity’ Button


Case-21 GET FINAL RESULT:

Click on ‘Get Final result’ Button

Page:19


Case-22 GET FCM RESULT :

User click on 'Get Result Table' Button

User click on 'FCM Result"

User get the score for Forest Cover Map in Tabular format

Page:20


Case-23 GET FTM RESULT :

User click on 'FTM Result' Button

User get the score for Forest Type Map in Tabular format

Case-24 GET BIOLOGICAL RICHNESS RESULT :

User click on 'Biological Richness Result' Button

User get the score for 'Biological Richness in Tabular format

Page:21


Case-25 GET LANDSCAPE INTEGRITY RESULT :

User click on 'Landscape Integrity Result' Button

User get the score for 'Biological Richness in Tabular format

Case-26 GET DSS RESULT :

User click on 'DSS Result' Button

User get the Final score in Tabular format

Page:22


User click on 'Result' Button

Result of Final Result in Tabular format

Case-27 GET FCM WITHOUT GRID:

If User want Forest cover map without grid information

Click on 'FCM without Grid' Button

Page:23


Case-28 GET FTM WITHOUT GRID:

If User want Forest Type map without grid information

Click on 'FTM without Grid' Button

Case-29 GET FCM WITHOUT GRID RESULT :

User click on 'FCM without Grid' Button

User get the result for 'FCM without Grid' in Tabular format

Page:24


Case-30 GET FTM WITHOUT GRID RESULT

User click on 'FTM without Grid' Button

User get the result for 'FTM without Grid' in Tabular format

Case-31 Get NPV Info:

User Click on ‘Get NPV Info’ Button

User clicks on ‘Get NPV Info’ in Get result table.


Case-32 Get NPV Result:

User click on 'NPV Result' Button

User get the result for 'FTM without G' in Tabular format

Save Result Table:

User click on ‘Save Results Table’ Button

User save results individually in XLS format for each Layer

User click on 'Save DSS Result' and save the final result in XLS format

Page:25

Documents

Manual for DSS - FSIfsi.nic.in/uploads/documents/dss-manual-11-4-15.pdf · Manual for DSS Decision Support ... - Manual Case-1 Logging in into Decision Support System: ... Browse