Upload
alberto-solis
View
110
Download
0
Embed Size (px)
Citation preview
-i- DPRTLR.01.01
-ii- DPRTLR.01.01
Table of Contents Pag
e
I. B A S I C O P E R A T I O N 1
1. P2 MODE 12. P1 MODE 2
3. MENU SELECTION KEY 3 4. LCD OPERATOR DISPLAY
3 5. EXAMPLE OF SETTING 4
II. P R O G R A M M I N G A T ' P 2 ' P O S I T I O N 5
1. FIRST PROGRAMMING 5 (1) RAM CLEAR 5 (2) DATE 5 (3) TIME 5 (4) HEADER MESSAGE 5 (5) TAX RATE 6 (6) SET FISCAL MACHINE 6
2. OPTION FLAG PROGRAMMING 7 (1)Flag No.1 (DEPARTMENT FLAGS) 7 (2)Flag No.2 (DEPARTMENT FLAGS) 7 (3)Flag No.3 (PLU FLAGS) 8 (4)Flag No.4 (PLU FLAGS) 8 (5)Flag No.5 (PLU FLAGS) 9 (6)Flag No.6 (PLU FLAGS) 9 (7)Flag No.7 (PLU FLAGS) 10 (8)Flag No.8 (CASHIER/SERVER FLAGS) 10 (9)Flag No.9 (CASHIER/SERVER FLAGS) 11 (10)Flag No.10 (TAX FLAGS) 11 (11)Flag No.11 (TAX FLAGS) 12 (12)Flag No.12 (TAX FLAGS) 12 (13)Flag No.13 (ROUNDING/CALCULATION FLAGS) 13 (14)Flag No.14 (ROUNDING/CALCULATION FLAGS) 13 (15)Flag No.15 (Not used) 13 (16)Flag No.16 (ROUNDING/CALCULATION FLAGS) 13 (17)Flag No.17 (ROUNDING/CALCULATION FLAGS) 14 (18)Flag No.18 (ROUNDING/CALCULATION FLAGS) 14 (19)Flag No.19 (ROUNDING/CALCULATION FLAGS) 14 (20)Flag No.20 (ROUNDING/CALCULATION FLAGS) 15 (21)Flag No.21 (2X BAR CODE TYPE FLAG) 15 (22)Flag No.22 (EXTERNAL DISPLAY FLAGS) 16 (23)Flag No.23 (RECEIPT JOURNAL FLAGS) 16 (24)Flag No.24 (RECEIPT JOURNAL FLAGS) 16 (25)Flag No.25 (RECEIPT/JOURNAL FLAGS) 17 (26)Flag No.26 (RECEIPT/JOURNAL FLAGS) 17 (27)Flag No.27 (FOOD STAMP FLAGS) 18 (28)Flag No.28 (REPORT FLAGS) 18 (29)Flag No.29 (REPORT FLAGS) 19 (30)Flag No.30 (REPORT FLAGS) 19 (31)Flag No.31 (REPORT FLAGS) 20 (32)Flag No.32 (ERROR/INVALID/PROHIBIT OPERATION FLAGS) 20 (33)Flag No.33 (ERROR/INVALID/PROHIBIT OPERATION FLAGS) 21
-iii- DPRTLR.01.01
(34)Flag No.34 (TRAINING OPERATION FLAGS) 21 (35)Flag No.35 (USER'S CHOICE OPERATION FLAGS) 22 (36)Flag No.36 (USER'S CHOICE OPERATION FLAGS) 22
-iv- DPRTLR.01.01
Table of Contents
Page
2. OPTION FLAG PROGRAMMING 23 (37)Flag No.37 (USER'S CHOICE OPERATION FLAGS) 23 (38)Flag No.38 (USER'S CHOICE OPERATION FLAGS) 23 (39)Flag No.39 (USER'S CHOICE OPERATION FLAGS) 24 (40)Flag No.40 (Not used) 24 (41)Flag No.41 (02 BAR CODE TYPE FLAG) 24 (42)Flag No.42 (REPORT FLAGS) 25 (43)Flag No.43 (GUEST CHECK FLAGS) 25 (44)Flag No.44 (TRAINING MODE) 26 (45)Flag No.45 (GUEST CHECK FLAGS) 26 (46)Flag No.46 (Currency mark/Decimal point) 27 (47)Flag No.47 (USER'S CHOICE OPERATION FLAGS) 27 (48)Flag No.48 (SUBTOTAL AMOUNT FLAGS) 28 (49)Flag No.49 (SCALE FLAGS) 28
3. CHANGING KEY LAYOUT 29
*KEY POSITION NUMBER ON FLAT KEYBOARD 29
*KEY POSITION NUMBER ON CONVENTIONAL KEYBOARD 30
*DEFAULT KEYBOARD LAYOUT (FLAT KEYBOARD) 31 *DEFAULT KEYBOARD LAYOUT (CONVENTIONAL KEYBOARD) 32 *FUNCTION KEY CODE TABLE 33
4. CHANGING ALPHA KEY LAYOUT 34 *DEFAULT ALPHA KEY LAYOUT ON FLAT KEYBOARD 35 *DEFAULT ALPHA KEY LAYOUT ON CONVENTIONAL KEYBOARD 35 *ALPHA KEY CODE TABLE 36
5. CHANGING TRANSACTION DESCRIPTOR 37 *TRANSACTION DESCRIPTOR TABLE No.1 : ENGLISH 38
6. SETTING SERIAL PORT 39
7. BILL PRINTER FORMAT 40
8. PROGRAM VERSION DISPLAY 40
9. RAM COPY (IRC) 40
10. PORT TEST 41
11. SYSTEM RESET 41
12. SYSTEM RESET & DEFAULT KEYBOARD PROGRAMMING 41
-v- DPRTLR.01.01
Table of Contents
Page
II. P R O G R A M M I N G A T ' P 1 ' P O S I T I O N 42
1. DEPARTMENT PROGRAMMING 42
2. PLU PROGRAMMING 45
3. PLU STOCK FILE PROGRAMMING 52
4. PLU LINKED STOCK FILE PROGRAMMING 53
5. PLU PRICE CHANGE 54
6. COMMERCIAL MESSAGE 54
7. DIRECT PLU KEY PROGRAMMING 55
8. SET MENU PROGRAMMING 58 9. COOKING INSTRUCTION PROGRAMMING 59
10. SERVER(CLERK)-ID NUMBER and NAME 60
11. MACHINE No. 61
12. REPORT P2 MODE PASSWORD 61
13. TAX RATE (TAX1 – TAX4) 62
14. LOCK OUT AMOUNT TABLE (HALO/LALO TABLE) 63
15. GROUP NAME for REPORT 64
16. DIRECT DEPT KEY WITH SHIFT PROGRAMMING 65
17. CASHIER NAME AND LINK DRAWER 66
18. PERCENTAGE DISCOUNT/ADD-ON KEY 67
19. AMOUNT DISCOUNT KEY 68
19.5 SUBTOTAL PERCENT PLUS KEY 69
20. CLOSING MEDIA KEY 70
21. OTHER FUNCTION KEY 71
22. FOREIGN CURRENCY 72
23. EURO PERIOD PRESET 72
24. REPORT CHAIN 73
25. MACRO KEY TABLE 73
-vi- DPRTLR.01.01
26. PRINTING ITEM for CHECK PRINTING 74
27. CHECK FORMAT TABLE 74
-vii- DPRTLR.01.01
Table of Contents
Page
28. KITCHEN PRINTER PROGRAMMING 76
29. MASTER/SLAVE TABLE (IRC) 77
30. TIME PROGRAMMING 78
31. DATE PROGRAMMING 78
32. TARE WEIGHT PRESET 78
33. START BILL No. PROGRAMMING 78
34. MODEM PRESET 79
35. ALL PRESET REPORT 80
36. PROGRAM VERSION DISPLAY 80
37. TRAINING MODE PASSWORD 80
-viii- DPRTLR.01.01
Table of Contents
Page
III. S E R I A L I N T E R F A C E & C O N N E C T I O N S 81
1. INTER-REGISTER COMMUNICATION (IRC) 81
(1) INTERFACE SPECIFICATION for Inter-Register Communication 81 (2) INTRODUCTION of Inter-Register Communication 81 (3) PROGRAMMING with Inter-Register Communication 82
2. SCANNER CONNECTION 83
(1) INTERFACE SPECIFICATION for Barcode Scanner 83 (2) CONNECTION for Metrologic MS700 Projection Scanner 83 (3) CONNECTION for NIPPONDENSO BHS 6060 Hand Scanner 84 (4) CONNECTION for SCANTECH POLARIS P-7010 84 (5) Metrologic MS700 Scanner Dip Switch Settings 85 (6) SCANNING OPERATIONS 85 (7) 2X TYPE of BAR CODE 86 (8) 02 TYPE of BAR CODE 86
3. SCALE CONNECTION 87
(1) INTERFACE SPECIFICATION 87 (2) CONNECTION 87 (3) PROTOCOL 88
4. EXTERNAL PRINTER CONNECTION 89
(1) INTERFACE SPECIFICATION 89 (2) CONNECTION 89 (3) DIP SWITCH SETTINGS 89
5. EXTERNAL DISPLAY CONNECTION 90
(1) INTERFACE SPECIFICATION 90 (2) CONNECTION 90 (3) DIP SWITCH SETTINGS 90 (4) CONNECTION of EXTERNAL DISPLAY AND THE SCANNER 91
-ix- DPRTLR.01.01
I. BASIC OPERATION
1. P2 MODE
This programming mode is used for important function level. Therefore don’t change in user side.
<P2> MODE : SPECIAL PROGRAMMING MODE
You can select following menu by using [SCRL-UP] and [SCRL DOWN] keys.
1. OPTION FLAG PROGRAMMING2. CHANGE KEY LAYOUT3. CHANGE ALPHA KEY LAYOUT4. CHANGE TRANSACTION DESCRIPTOR5. HEADER MESSAGE6. DATE PROGRAMMING7. TIME PROGRAMMING8. SETTING SERIAL PORT9. BILL PRINTER FORMAT10. VERSION NUMBER DISPLAY11. RAM CLEAR OPERATION12. I.R.C. RAM COPY13. SET FISCAL MACHINE14. PORT TEST
To enter to each programming mode, press [CASH] key after menu selection.
-1- DPRTLR.01.01
SELECT PROGRAM ITEM RAM CLEAR OPERATION IRC RAM COPY
SELECT PROGRAM ITEM OPTION FLAG PROGRAM CHANGE KEY
2. P1 MODE
This programming mode is used for general user programming. <P1> MODE : USER PROGRAMMING MODE
You can select following programming menu by using [SCRL-UP] and [SCRL DOWN] keys.
1. DEPARTMENT PROGRAMMING2. PLU PROGRAMMING3. PLU QUICK PRICE CHANGE4. COMMERCIAL MESSAGE PROGRAMMING5. DIRECT PLU KEY PROGRAMMING6. PLU STOCK LINK PROGRAMMING7. SET MENU PROGRAMMING8. COOKING INSTRUCTION MESSAGE PROGRAMMING9. STOCK FILE CORRECTION10. STOCK FILE PROGRAM11. SERVER(CLERK) ID PROGRAMMING12. MACHINE NUMBER PROGRAMMING13. REPORT/P2 MODE PASSWORD PROGRAMMING14. TAX RATE PROGRAMMING15. LOCK OUT AMOUNT TABLE PROGRAMMING16. GROUP NAME PROGRAMMING17. DIRECT DEPT WITH SHIFT PROGRAMMING18. CASHIER PROGRAMMING19. %DISCOUNT AND % ADD-ON PROGRAMMING20. AMOUNT DISCOUNT PROGRAMMING21. CLOSING MEDIA PROGRAMMING22. OTHER FUNCTION KEY PROGRAMMING
R/A1-3, P/O1-3, VOID, ERRC, VOID, NOSALE, EXCHG, RETURN, PROMO 23. FOREIGN CURRENCY PROGRAMMING24. EURO PERIOD PRESET PROGRAMMING25. CHAIN REPORT PROGRAMMING26. MACRO KEY FUNCTION27. CHECK PRINT ITEM 28. CHECK PRINT FORMAT29. KITCHEN PRINTER PROGRAMMING30. MASTER SLAVE TABLE PROGRAMMING31. TIME PROGRAMMING 32. DATE PROGRAMMING33. TARE WEIGHT PRESET34. START BILL NUMBER (CONSECUTIVE #) PROGRAMMING35. MODEM PRESET36. P1 PRESETTING REPORT 37. VERSION DISPLAY38. TRAINING MODE PASSWORD SETTING
-2- DPRTLR.01.01
SELECT PROGRAM ITEM DEPARTMENT PROGRAM PLU
SELECT PROGRAM ITEM P1 PRESET REPORT VERSION No.
3. MENU SELECTION KEY
In P1 and P2 mode, following six keys are used frequently.
Used for scrolling up menu items.
Used for scrolling down menu items.
Used for selecting each menu. Used for data setting. (Same as ENTER key on PC)
Used for returning to main menu and exit.
Used for returning one step.
Used for correcting wrong input data.
4. LCD OPERATOR DISPLAY
Operator display has frame of four lines and one line can indicate 20 characters. When control lock position is located in LOCK position, LCD back light is turned off.
-3- DPRTLR.01.01
SELECT PROGRAM ITEM OPTION FLAG PROGRAM CHANGE KEY
5. Example: Changing option flag#3 value from 15 to 14
Enter TOTAL key to return to MAIN MENU
-4- DPRTLR.01.01
SELECT PROGRAM ITEM OPTION FLAG PROGRAM
SELECT OPERATION DATA PRESET MODE
OPTION FLAG PROGRAM
ENTER FLAG No.1-
OPTION FLAG PROGRAM
ENTER FLAG No.1-
Current flag value is indicated.
OPTION FLAG PROGRAM
ENTER FLAG No.1-
OPTION FLAG PROGRAM
ENTER FLAG No.1-
SELECT PROGRAM ITEM OPTION FLAG PROGRAM
Input requested flag number and press [CASH] key
Enter new value and press [CASH] Key.
Press [CASH] key to select data preset mode.
Press [CASH] key to enterOption flag programming mode.
II. P R O G R A M M I N G A T ' P 2 ' P O S I T I O N
THE CONTROL LOCK KEY SHOULD BE TURNED TO 'P2' POSITION. TURNING TO 'P2' POSITION IS AVAILABLE ONLY BY SPECIAL P2 KEY.
1. FIRST PROGRAMMING
(1) RAM CLEAR
OPERATION SEQUENCE
Select "RAM CLEAR OPERATION" in P2 mode main menu and press [CASH] key. If you select "TOTAL CLEAR w/o GT", press [CASH] key to clear totalizer. If you select "TOTAL CLEAR with GT", press [CASH] key to clear totalizer and X1,X2,Z1,Z2 report counter ,receipt counter and GRAND TOTAL. If you select "ALL RAM CLEAR", press [CASH] key. All RAM data with programming will be cleared. Then default programming data will be programmed automatically.
Note: To exit operation, press [TOTAL] key.
(2) DATE
OPERATION SEQUENCE
Select "DATE PROGRAMMING" in P2 mode main menu and press [CASH] key. Current DATE is displayed and you can enter new DATE (MM/DD/YY).
Note: To exit operation, press [TOTAL] key.
(3) TIME
OPERATION SEQUENCE
Select "TIME PROGRAMMING" in P2 mode main menu. Current TIME is displayed and you can enter new TIME.
Note: Time enter by 24 hour. If enter 6 digits, HH,MM,SS If enter 4 digits, HH,MM To exit operation, press [TOTAL] key.
(4) HEADER MESSAGE
OPERATION SEQUENCE
Select "HEADER MESSAGE" in P2 mode main menu and press [CASH] key. If you select "PRESET PRINT LINE", press [CASH] key and enter number of LOGO lines required (1-8 lines). If you select "PRESET HEADER LINE, press [CASH] key and enter new message (MAX 24 characters).
● To exit operation, press [TOTAL] key.
-5- DPRTLR.01.01
Note: 1 character is 2 digits key code. (SEE "ALPHA KEY CODE TABLE" )
-6- DPRTLR.01.01
(5) TAX RATE *** This programming is at 'P1' position ***
Select "TAX RATE PROGRAMMING" in P1 mode main menu and press [CASH] key.
● If you choose "PRESET TAX RATE", press [CASH] key.
Enter percent rate for tax 1 and press [CASH] key.Note: TAX rate is 4 digits. (00.00% - 99.99%)
To exit operation, press [TOTAL] key.
(6) SET FISCAL MACHINE OPERATION SEQUENCE This operation needs hardware operation. This programming can be done when the totalizer is all zero only. After this programming, the register goes to the FISCAL MACHINE. This programming is effective only once and it is impossible to go back to NON-FISCAL MACHINE again.
Select "SET FISCAL MACHINE" in P2 mode main menu and press [CASH] key. Enter registration ID (10 digits), press [CASH] key. Enter taxpayer code (11 digits), press [CASH] key. Enter password, press [VOID] key. Push [TOTAL] key, finished.
Note: 1 character is 2 digits key code. (SEE "ALPHA KEY CODE TABLE" )
-7- DPRTLR.01.01
TAX RATE PROGRAMTAX 1ENTER TAX RATE
2. OPTION FLAG PROGRAMMING
OPERATION SEQUENCE
Select "OPTION FLAG PROGRAM" in P2 mode main menu and [CASH] key. If you select "DATA PRESET MODE", press [CASH] key. If you select "PRESET REPORT ", press [CASH] key for a program scan.
Note: To exit operation press [TOTAL] key.
(1)Flag No.1 (DEPARTMENT FLAGS)
[1]Print Sales Ratio of each Department at DEPT Total (Report) yes/no [2]Print average unit price of each Department (Report) yes/no [3]Print Department Report on Full Sales Report yes/no [4]Print Department number on Report yes/no
(2)Flag No.2 (DEPARTMENT FLAGS)
[1]Not used [2]Assign the operation of DEPT SHIFT KEY = STAY DOWN MODE/ POP UP MODE [3]Skip 0 data on Department Report yes/no [4]Not used
-8- DPRTLR.01.01
Flag Value [1] [2] [3] [4]
00 no no yes
no
01 no no yes
yes
02 no no no no03 no no no ye
s04 no ye
syes
no
05 no yes
yes
yes
06 no yes
no no
07 no yes
no yes
08 yes
no yes
no
Flag Value [1]
[2] [3] [4]
00 -- pop up no --01 -- pop up no --02 -- pop up ye
s--
03 -- pop up yes
--
04 -- stay down
no --
05 -- stay down
no --
06 -- stay down
yes
--
07 -- stay down
yes
--
08 -- -- -- --09 -- -- -- --
(3)Flag No.3 (PLU FLAGS)
[1]PLU code 6 digits PLU/13 digits PLU [2]Maximum number of Direct key position & shift level
100 keys & 5 levels / 130 keys & 3 levels [3]PLU with accumulated total (X2/Z2 ) yes/no [4]PLU flag obey linked Department Flag yes/no
(4)Flag No.4 (PLU FLAGS)
[1]PLU price level 1level/3levels [2]PLU descriptor length 12digits/16digits [3]not use [4]Prohibit programming PLU unit price of "0" yes/no
-9- DPRTLR.01.01
Flag Value [1] [2] [3] [4]
00 6 digits 100 & 5 no no01 6 digits 100 & 5 no yes02 6 digits 100 & 5 yes no03 6 digits 100 & 5 yes yes04 6 digits 130 & 3 no no05 6 digits 130 & 3 no yes06 6 digits 130 & 3 yes no07 6 digits 130 & 3 yes yes08 13
digits100 & 5 no no
09 13 digits
100 & 5 no yes
10 13 digits
100 & 5 yes no
11 13 digits
100 & 5 yes yes
12 13 130 & 3 no no
Flag Value [1]
[2]
[3]
[4]
00 1 12
--- no
01 1 12
--- yes
02 1 12
--- no
03 1 12
--- yes
04 1 16
--- no
05 1 16
--- yes
06 1 16
--- no
07 1 16
--- yes
08 3 1 --- no
Caution:This flag value affects to the basic memory location and size of PLU database, Therefore, before programming PLU this flag value must be decided.
Caution:This flag value affects to the basic memory location and size of PLU database, Therefore, before programming PLU this flag value must be decided.
(5)Flag No.5 (PLU FLAGS)
[1]Print PLU number on receipt yes/no [2]Print PLU number on report yes/no [3]Print unit price on report yes/no [4]Skip 0 data on PLU report yes/no
(6)Flag No.6 (PLU FLAGS)
[1]Print Negative PLU on All PLU Reports yes/no [2]Print sales ratio of All PLU Reports yes/no [3]Print sales ratio of PLU GROUP 1 Report yes/no [4]Print sales ratio of PLU GROUP 2 Report yes/no
-10- DPRTLR.01.01
Flag Value [1] [2] [3] [4]
00 no no no no01 no no no ye
s02 no no ye
sno
03 no no yes
yes
04 no yes
no no
05 no yes
no yes
06 no yes
yes
no
07 no yes
yes
yes
08 yes
no no no
Flag Value [1] [2] [3] [4]
00 no no no no01 no no no ye
s02 no no ye
sno
03 no no yes
yes
04 no yes
no no
05 no yes
no yes
06 no yes
yes
no
07 no yes
yes
yes
08 yes
no no no
(7)Flag No.7 (PLU FLAGS)
[1]Assign the operation of PLU price shift key = STAY DOWN MODE = POP UP MODE [2]Assign the operation of PLU SHIFT KEY = STAY DOWN MODE = POP UP MODE [3]Type of PLU SHIFT Type 1 : PLU SHIFT for the PLU Shift Key Type 2 : PLU SHIFT for Management Control Type 3 : PLU SHIFT for Time Shift
(8)Flag No.8 (CASHIER/SERVER FLAGS)
[1]Cashier Key is changeable during registration yes/no [2]SERVER-ID number is changeable during registration yes/no [3]Maintain SERVER-ID after registered yes/no [4]Allow indication of the SERVER-ID number yes/no (If 'no' then operation is [SERVER-ID] 999999 [SERVER-ID])
-11- DPRTLR.01.01
Flag Value [1] [2] [3] [4]
00 pop up pop up type1
---
01 pop up pop up type2
---
02 pop up pop up type3
---
03 --- --- --- ---04 pop up stay
downtype1
---
05 pop up stay down
type2
---
06 pop up stay down
type3
---
07 --- --- --- ---08 stay
downpop up type
1---
Flag Value [1] [2] [3] [4]
00 no no no no01 no no no ye
s02 no no ye
sno
03 no no yes
yes
04 no yes
no no
05 no yes
no yes
06 no yes
yes
no
07 no yes
yes
yes
08 yes
no no no
(9)Flag No.9 (CASHIER/SERVER FLAGS)
[1]Print SERVER-ID name on receipt yes/no [2]Compulsory enter the SERVER-ID number before registration yes/no [3]Compulsory enter the SERVER-ID number before finalization yes/no (If 'yes' then FLAG No.8-[2] must be 'yes') [4]Skip 0 data on CASHIER and SERVER-ID report yes/no
(10)Flag No.10 (TAX FLAGS)
[1]Assign Tax 1 Add on tax mode (EXCLUDE) / Value added tax mode (INCLUDE) [2]Assign Tax 2 Add on tax mode (EXCLUDE) / Value added tax mode (INCLUDE) [3]Assign Tax 3 Add on tax mode (EXCLUDE) / Value added tax mode (INCLUDE) [4]Assign Tax 4 Add on tax mode (EXCLUDE) / Value added tax mode (INCLUDE)
-12- DPRTLR.01.01
Flag Value [1] [2] [3] [4]
00 no no no no01 no no no ye
s02 no no ye
sno
03 no no yes
yes
04 no yes
no no
05 no yes
no yes
06 no yes
yes
no
07 no yes
yes
yes
08 yes
no no no
Flag value [1] [2] [3] [4]
00 exclude
exclude
exclude
exclude
01 exclude
exclude
exclude
include
02 exclude
exclude
include exclude
03 exclude
exclude
include include
04 exclude
include exclude
exclude
05 exclude
include exclude
include
06 exclude
include include exclude
07 exclude
include include include
08 include exclude
exclude
exclude
09 include exclud exclud include
(11)Flag No.11 (TAX FLAGS)
[1]Not used [2]Print NET SALES AMOUNT in case of VAT yes/no [3]The Canadian Goods and Services TAX(GST) yes/no [4]TAX1 amount charged another taxable yes/no Note: The flag [4] is only valid when option flag [3] is “yes”.
(12)Flag No.12 (TAX FLAGS)
[1]Print Tax symbol yes/no [2]Print Taxable Amount on receipt/journal yes/no [3]Print Amount of each tax on receipt/journal yes/no [4]Print Total of all taxes on receipt/journal yes/no
-13- DPRTLR.01.01
Flag Value [1]
[2] [3] [4]
00 --- no no no01 --- no no ye
s02 --- no ye
sno
03 --- no yes
yes
04 --- yes
no no
05 --- yes
no yes
06 --- yes
yes
no
07 --- yes
yes
yes
08 --- --- --- ---
Flag Value [1] [2] [3] [4]
00 yes
no no no
01 yes
no no yes
02 yes
no yes
no
03 yes
no yes
yes
04 yes
yes
no no
05 yes
yes
no yes
06 yes
yes
yes
no
07 yes
yes
yes
yes
08 no no no no
(13)Flag No.13 (ROUNDING/CALCULATION FLAGS)
[1]Decimal point position
This operation is available only when all report data is zero.
(14)Flag No.14 (ROUNDING/CALCULATION FLAGS)
[1]Rounding factor for Unit price calculation and Amount calculation (Amount / Quantity) (Quantity x Unit price)
(15)Flag No.15 (Not used)
(16)Flag No.16 (ROUNDING/CALCULATION FLAGS)
[1]Rounding factor for % calculation and FC calculation
-14- DPRTLR.01.01
Flag Value
00 No decimal point01 1’st decimal point02 2’nd decimal
point03 3’rd decimal point
Flag Value
00 Round down
05 4/509 Round up
Flag Value
00 Round down
05 4/509 Round up
(17)Flag No.17 (ROUNDING/CALCULATION FLAGS)
[1]Overflow check by SUBTOTAL only / by SUBTOTAL & DAILY NET TOTAL [2]Rounding position for Unit price and Amount calculation [3]Rounding position for Tax calculation [4]Rounding position for % calculation
[2][3][4] = Rounding to 1'st decimal position / Rounding to last integer
(18)Flag No.18 (ROUNDING/CALCULATION FLAGS)
[1]Rounding for last 2 integers of used minimum coin
(19)Flag No.19 (ROUNDING/CALCULATION FLAGS)
[1]Rounding for last 2 integers of maximum Round Down an amount
*Example : Used minimum coin 25 Maximum Round Down an amount 12 Flag No.18 = 25 Flag No.19 = 12 (EX1) Total amount 37 -> 25 (25 + 12 ... Round Down) (EX2) Total amount 38 -> 50 (25 + 13 ... Round Up)
-15- DPRTLR.01.01
Flag Value [1] [2] [3] [4]
00 Subtotal 1’st decimal
1’st decimal
1’st decimal
01 Subtotal 1’st decimal
1’st decimal
last decimal
02 Subtotal 1’st decimal
last decimal
1’st decimal
03 Subtotal 1’st decimal
last decimal
last decimal
04 Subtotal last decimal
1’st decimal
1’st decimal
05 Subtotal last decimal
1’st decimal
last decimal
06 Subtotal last decimal
last decimal
1’st decimal
07 Subtotal last decimal
last decimal
last decimal
08 & Net total 1’st 1’st 1’st
Value [1]
01 Minimum coin = 102 = 2::
::
50 = 50
Value [1]
00 No round down01 Max. Round down = 1::
::
50 = 50
(20)Flag No.20 (ROUNDING/CALCULATION FLAGS)
[1]Rounding specification
*Note : 'on detail' means -------------------(1)Check entry amount (2)No rounding entry amount : 'on finalize' means -----------------(1)Check tendering amount (2)Rounding total amount : Switzerland specification is fixed.--(1)Check entry amount (2)Check tendering amount (3)No rounding total amount (4)Rounding % calculated amount (5)Rounding exclude Tax amount : Norway specification is fixed.-------(1)No check entry amount (2)No check tendering amount (3)Rounding total amount
(21)Flag No.21 (2X BAR CODE TYPE FLAG)
Reading the 2X type of bar code is available by using a general barcode scanner. See "(8) 2X TYPE of BAR CODE" of "2. SCANNER CONNECTION".
NOTE: 02 bar code type flag, see option flag No.41
-16- DPRTLR.01.01
Flag Value [1]
00 No rounding01 Switzerland rounding02 Holland rounding on detail and finalizing03 Holland rounding on detail and finalizing04 Holland rounding on finalizing only05 Norway rounding06 Norway rounding07 New Norway rounding on detail and finalizing08 New Norway rounding on finalizing only09 Danish rounding on detail and finalizing10 Danish rounding on finalizing only
Flag Value Content
00 Not use the 2X code
01 Type 1(weight)02 Type 2(weight)03 Type 3(weight)04 Type 4(weight)05 Type 5(weight)06 Type 6(unit price)07 Type 7(unit price)08 Type 8(unit price)09 Type 9(unit price)
(22)Flag No.22 (EXTERNAL DISPLAY FLAGS)
[1]Not used [2]Used external display type STANDARD/EPSON [3]Subtotal to external display include add-on TAX yes/no [4]Subtotal display during transaction yes/no
(23)Flag No.23 (RECEIPT/JOURNAL FLAGS)
[1]Not used [2]Not used [3]Date line print format = YY/MM/DD (YY:YEAR,MM:MONTH,DD:DAY) = MM/DD/YY = DD/MM/YY
(24)Flag No.24 (RECEIPT/JOURNAL FLAGS)
[1]Not used [2]Not used [3]Not used [4]Buffered Bill printing is permitted yes/no (Bill issue after transaction closing will be available by turn “Yes”)
-17- DPRTLR.01.01
Flag Value [1]
[2] [3] [4]
00 --- Standard no no01 --- Standard no ye
s02 --- Standard ye
sno
03 --- Standard yes
yes
04 --- EPSON no no05 --- EPSON no ye
Flag Value [1]
[2]
[3]
00 --- --- YY/MM/DD01 --- --- MM/DD/YY02 --- --- DD/MM/YY03 --- ---
Flag Value [1] [2] [3] [4]
00 --- --- --- no01 --- --- --- yes02 --- --- --- ---03 --- --- --- ---04 --- --- --- ---05 --- --- --- ---06 --- --- --- ---07 --- --- --- ---08 --- --- --- ---09 --- --- --- ---10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---
--- --- --- ---
(25)Flag No.25 (RECEIPT/JOURNAL FLAGS)
[1]Print EURO total amount at EURO period1 yes/no [2]Print the counter of sales items on receipt yes/no [3]Print total amount and transaction name double size yes/no [4]Print subtotal amount when [SUBTOTAL] is operated yes/no
(26)Flag No.26 (RECEIPT/JOURNAL FLAGS)
[1]Graphic LOGO with/without [2]Printer cutting type full/Partial cut [3]Printer auto cutter with/without [4]Graphic LOGO used default data yes/no
-18- DPRTLR.01.01
Flag Value [1] [2] [3] [4]
00 yes
no no no
01 yes
no no yes
02 yes
no yes
no
03 yes
no yes
yes
04 yes
yes
no no
05 yes
yes
no yes
06 yes
yes
yes
no
07 yes
yes
yes
yes
08 no no no no
Flag Value [1] [2] [3] [4]
00 with full without yes
01 with full without no02 with full with ye
s03 with full with no04 with partial without ye
s05 with partial without no06 with partial with ye
s07 with partial with no08 without full without ---09 without full without ---10 without full with ---11 without full with ---12 without partial without ---
(27)Flag No.27 (FOOD STAMP FLAGS)
[1]Food Stamp media Stamps/Debit Card [2]Food Stamp Total key operation required before tendering Required/Not Required [3]Type of FOOD STAMP No FOOD STAMP Type1 : Tax Forgiveness (Illinois food stamp rules) Type2 : Tax payment with FOOD STAMP Type3 : Tax payment with CASH
(28)Flag No.28 (REPORT FLAGS)
[1]Print report count on report yes/no [2]Reset consecutive number after issuance of Z1 Report yes/no [3]Grand total after Z1 Full Report Reset/Non reset [4]Skip 0 data on Function report yes/no
-19- DPRTLR.01.01
Flag Value [1] [2] [3]
00 Stamps Not required No Food Stamp
01 Stamps Not required TYPE 102 Stamps Not required TYPE 203 Stamps Not required TYPE 304 Stamps Required No Food
Stamp05 Stamps Required TYPE 106 Stamps Required TYPE 207 Stamps Required TYPE 308 Debit card Not required No Food
Stamp09 Debit card Not required TYPE 110 Debit card Not required TYPE 211 Debit card Not required TYPE 312 Debit card Required No Food
Stamp
Flag Value [1] [2] [3] [4]
00 no no Reset no01 no no Reset ye
s02 no no Non
resetno
03 no no Non reset
yes
04 no yes
Reset no
05 no yes
Reset yes
06 no yes
Non reset
no
07 no yes
Non reset
yes
08 yes
no Reset no
(29)Flag No.29 (REPORT FLAGS)
[1]Prohibit issuance of X1-report all yes/no [2]Prohibit issuance of in drawer total yes/no [3]No Declaration (No print on report) yes/no [4]Declaration compulsory yes/no
(30)Flag No.30 (REPORT FLAGS)
[1]Print CANCEL total on report yes/no [2]Print Non Resetable Grand Total and Gross Total yes/no [3]Print Non Resetable Grand Total on X2,Z2-report yes/no [4]Addition Gross Total to Grand Total or Addition NET Total to Grand Total
-20- DPRTLR.01.01
Flag Value [1] [2] [3] [4]
00 no no no no01 no no no ye
s02 no no ye
sno
03 no no yes
---
04 no yes
no no
05 no yes
no yes
06 no yes
yes
no
07 no yes
yes
---
08 yes
no no no
Flag Value [1] [2] [3] [4]
00 no no no Gross Total01 no no no Net Total02 no no --- Gross Total03 no no --- Net Total04 no ye
sno Gross Total
05 no yes
no Net Total
06 no yes
yes
Gross Total
07 no yes
yes
Net Total
08 yes
no no Gross Total
09 yes
no no Net Total
10 ye no --- Gross Total
(31)Flag No.31 (REPORT FLAGS)
[1]Fix '1' quantity when Multiplication yes/no [2]Select the operation of the counter at hourly report Sales times/ quantity [3]Print Sales Ratio of Hourly Total yes/no [4]Print average unit price of Customer on Full Report yes/no and Cashier Report (NET TOTAL / CUSTOMER COUNT)
(32)Flag No.32 (ERROR/INVALID/PROHIBIT OPERATION FLAGS)
[1]Drawer closing is compulsory yes/no [2]Generate an error when total amount is '0' yes/no [3]When non-preset key is used Generate on error or invalidate the operation [4]Compulsory card number input in card payment yes/no
-21- DPRTLR.01.01
Flag Value [1] [2] [3] [4]
00 no Sales times no no01 no Sales times no ye
s02 no Sales times ye
sno
03 no Sales times yes
yes
04 no Sales quantity no no05 no Sales quantity no ye
s06 no Sales quantity ye
sno
07 no Sales quantity yes
yes
08 yes
Sales times no no
09 yes
Sales times no yes
10 ye Sales times ye no
Flag Value
[1] [2] [3] [4]
00 yes no Error no01 yes no Error yes02 yes no Invalidity no03 yes no Invalidity yes04 yes yes Error no05 yes yes Error yes06 yes yes Invalidity no07 yes yes Invalidity yes08 no no Error no09 no no Error yes10 no no Invalidity no11 no no Invalidity yes12 no yes Error no13 no yes Error yes14 no yes Invalidity no15 no yes Invalidity yes
(33)Flag No.33 (ERROR/INVALID/PROHIBIT OPERATION FLAGS)
[1]Allow entering minus factor key yes/no [2]Prohibit entering unit price of "0" yes/no [3]Allow changing for Card payment yes/no [4]Allow split tendering of sales yes/no
(34)Flag No.34 (TRAINING OPERATION FLAGS)
[1]Print training total amount on Report yes/no [2]Print on receipt in training mode yes/no [3]Print on journal in training mode yes/no [4]Training mode entering is available in R mode yes/no
-22- DPRTLR.01.01
Flag Value [1] [2] [3] [4]
00 no no no no01 no no no ye
s02 no no ye
sno
03 no no yes
yes
04 no yes
no no
05 no yes
no yes
06 no yes
yes
no
07 no yes
yes
yes
08 yes
no no no
Flag Value [1] [2] [3] [4]
00 no yes
yes
no
01 no yes
yes
yes
02 no yes
no no
03 no yes
no yes
04 no no yes
no
05 no no yes
yes
06 no no no no07 no no no ye
s08 ye
syes
yes
no
(35)Flag No.35 (USER'S CHOICE OPERATION FLAGS)
[1]Not used [2]Print price of Sub item in Set menu
(36)Flag No.36 (USER'S CHOICE OPERATION FLAGS)
[1]TenKey speaker with/without [2]Compulsory [SUBTOTAL] key operation before finalization yes/no [3]Chain multiplication or Split pricing [4]Multi subtotal % operation yes/no
-23- DPRTLR.01.01
Flag Value [1]
[2] [3] [4]
00 --- N --- ---01 --- N --- ---02 --- N --- ---03 --- --- --- ---04 --- Y --- ---05 --- Y --- ---06 --- Y --- ---07 --- --- --- ---08 --- --- --- ---09 --- --- --- ---10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---
Flag Value [1] [2] [3] [4]
00 no no no no01 no no no ye
s02 no no ye
sno
03 no no yes
yes
04 no yes
no no
05 no yes
no yes
06 no yes
yes
no
07 no yes
yes
yes
08 yes
no no no
(37)Flag No.37 (USER'S CHOICE OPERATION FLAGS)
[1]Not used [2]Not used [3]Bill type(printer type) Hard(slip printer)/Soft(terminal printer) [4]Magnetic card reader format track1 / track2
[3] If you require connecting the EPSON 295 slip printer, set [2] with hard check.
(38)Flag No.38 (USER'S CHOICE OPERATION FLAGS)
[1]Allow POST-TENDERING yes/no [2]Allow for Check Cashing yes/no [3]Stop report printing yes/no [4]Subtotal display include add-on TAX yes/no
Note [3]: If you press the clear key, the display will show '-- FIn --',Receipt and Journal will print '*INCOMPLETE REPORT' and the printer will stop.
-24- DPRTLR.01.01
Flag Value [1]
[2]
[3] [4]
00 --- --- Soft Track 101 --- --- Soft Track202 --- --- Hard Track 103 --- --- Hard Track204 --- --- --- ---05 --- --- --- ---06 --- --- --- ---07 --- --- --- ---08 --- --- --- ---09 --- --- --- ---10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---
Flag Value [1] [2] [3] [4]
00 no no no no01 no no no ye
s02 no no ye
sno
03 no no yes
yes
04 no yes
no no
05 no yes
no yes
06 no yes
yes
no
07 no yes
yes
yes
08 yes
no no no
(39)Flag No.39 (USER'S CHOICE OPERATION FLAGS)
[1]Not used [2]Not used [3]Not used [4]Consolidated reports (IRC) Consolidated report only / All ECR reports and Consolidated report
(40)Flag No.40 (Not used)
(41)Flag No.41 (02 BAR CODE TYPE FLAG)
The 02 type of bar code can be read by the scanner. See "(9) 02 TYPE of BAR CODE" of "2. SCANNER CONNECTION".
NOTE: 2X bar code type flag, see option flag No.21
-25- DPRTLR.01.01
Flag Value [1]
[2]
[3]
[4]
00 --- --- --- only
01 --- --- --- all
Flag Value Content
00 Not use the 02 code
01 Type 102 Type 203 Type 3
(42)Flag No.42 (REPORT FLAGS)
[1]Not used [2]Print Z-Count on Z transaction report yes/no [3]Prohibit issuance of X2-report all yes/no [4]Prohibit issuance of Z2-report all yes/no
(43)Flag No.43 (GUEST CHECK FLAGS)
[1]Not used [2]Receipt issue at N/B yes/no [3]Compulsory slip print for guest check before new balance yes/no [4]Compulsory slip print for guest check before finalization yes/no
-26- DPRTLR.01.01
Flag Value [1]
[2] [3] [4]
00 --- no no no01 --- no no ye
s02 --- no ye
sno
03 --- no yes
yes
04 --- yes
no no
05 --- yes
no yes
06 --- yes
yes
no
07 --- yes
yes
yes
08 --- --- --- ---
Flag Value [1]
[2] [3] [4]
00 --- yes no no01 --- yes no yes02 --- yes yes no03 --- yes yes yes04 --- no no no05 --- no no yes06 --- no yes no07 --- no yes yes08 --- --- --- ---09 --- --- --- ---10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---
(44)Flag No.44 (Not used)
(45)Flag No.45 (GUEST CHECK FLAGS)
[1]Compulsory tracking number input yes/no [2]Automatic tracking number assignment yes/no [3]Compulsory table number input yes/no [4]Compulsory covers input yes/no
-27- DPRTLR.01.01
Flag Value [1] [2] [3] [4]
00 no no no no01 no no no ye
s02 no no ye
sno
03 no no yes
yes
04 no yes
no no
05 no yes
no yes
06 no yes
yes
no
07 no yes
yes
yes
08 yes
no no no
(46)Flag No.46 (Currency Mark/decimal point)
[3]DECIMAL POINT IS DOT or COMMA
(47)Flag No.47 (USER'S CHOICE OPERATION FLAGS)
[1]Management Control(X-LOCK) for server change yes/no [2]Management Control(X-LOCK) for tracking transfer yes/no [3]Management Control(X-LOCK) for tracking consolidation yes/no [4]Management Control(X-LOCK) for tracking slip yes/no
-28- DPRTLR.01.01
Flag Value [1] [2] [3] [4]
00 no no no no01 no no no ye
s02 no no ye
sno
03 no no yes
yes
04 no yes
no no
05 no yes
no yes
06 no yes
yes
no
07 no yes
yes
yes
08 yes
no no no
Flag Value [1] [2] [3] [4]
00 dot01 dot02 comm
a03 comm
a0405060708091011121314
(48)Flag No.48 (SUBTOTAL AMOUNT DISCOUNT FLAGS)
[1]DISCOUNT1 affect FOOD STAMP yes/no [2]DISCOUNT2 affect FOOD STAMP yes/no [3]DISCOUNT3 affect FOOD STAMP yes/no [4]DISCOUNT4 affect FOOD STAMP yes/no
(49)Flag No.49 (SCALE FLAGS)
[1]Not used [2]Not used
[3]Scale unit type( xx.xxx/xxx.xx) kilogram/pound [4]Used tare type manual/preset
-29- DPRTLR.01.01
Flag Value [1] [2] [3] [4]
00 no no no no01 no no no ye
s02 no no ye
sno
03 no no yes
yes
04 no yes
no no
05 no yes
no yes
06 no yes
yes
no
07 no yes
yes
yes
08 yes
no no no
Flag Value [1]
[2]
[3] [4]
00 --- --- kilo manual01 --- --- kilo preset02 --- --- poun
dmanual
03 --- --- pound
preset
04 --- --- --- ---05 --- --- --- ---06 --- --- --- ---07 --- --- --- ---08 --- --- --- ---09 --- --- --- ---10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---
3. CHANGING KEY LAYOUT
OPERATION SEQUENCE
Select "CHANGE KEY LAYOUT" in P2 mode main menu and press [CASH] key. ●If you select "PRESET REPORT ", press [CASH] key for a program scan.
●If you select "DATA PRESET MODE", press [CASH] key.
Enter key following key position number and press [CASH] key. Current function key code number is indicated to right side of LCD display.Input new function key code number and press [CASH] key.
●To exit operation, press [TOTAL] key.
-30- DPRTLR.01.01
CHANGE ALPHA LAYOUT
ENTER KEY No.
STANDARD FLAT KEYBOARD
KEY LOCATION NUMBER
64 75 86 97 108
119
130
141
152
163
65 75 87 98 109
120
131
142
153
164
66 76 88 99 110
121
132
143
154
165
67 77 89 100
111
122
133
144
155
166
1 8 15 22 29 36 43 50 57 68 78 90 101
112
123
134
145
156
167
2 9 16 23 30 37 44 51 58 69 79 91 102
113
124
135
146
157
168
3 10 17 24 31 38 45 52 59 70 80 92 103
114
125
136
147
158
169
4 11 18 25 32 39 46 53 60 71 81 93 104
115
126
137
148
159
170
5 12 19 26 33 40 47 54 61 72 82 94 105
116
127
138
149
160
171
CONVENTIONAL KEYBOARD
1 11 2
1
3
1
41 5
1
6
1
71
OPTION
KEYBOARD
2 12 2
2
3
2
42 5
2
6
2
72
3 13 2
3
3
3
43 5
3
6
3
73
4 14 2
4
3
4
44 5
4
6
4
74
5 15 2
5
3
5
45 5
5
6
5
75
6 16 2
6
3
6
46 5
6
6
6
76 81 8
6
9
1
96 1
0
1
10
6
1
1
1
7 17 2
7
3
7
47 5
7
6
7
77 82 8
7
9
2
97 1
0
2
10
7
1
1
2
8 18 2
8
3
8
48 5
8
6
8
78 83 8
8
9
3
98 1
0
3
10
8
1
1
3
9 19 2
9
3
9
49 5
9
6
9
79 84 8
9
9
4
99 1
0
4
10
9
1
1
4
1
0
20 3
0
4
0
50 6
0
7
0
80 85 9
0
9
5
10
0
1
0
5
11
0
1
1
5
Keyboard may be easily altered from single-wide key-tops to double-wide or quad-wide. All positions are programmable except, Receipt Feed, Journal Feed Key.
-31- DPRTLR.01.01
DEFAULT KEY LAYOUT
FLAT KEYBOARD
1
2
3
4
RF JF CAN RET _ -% +% CARD
3
N.B.5
R/A
P/O #/NS SERV IN
ST%+1
ST%+2
CARD
2
SCRL
UP
6
ENT
REL
X
TIME MESS PLU BILL #
DEPT 5
DEPT 10
CARD
1
SCRL
DOWN
7
VOI
D 7 8 9
PICK
UP
BILL
DEPT 4
DEPT 9
SUB
TOTA
L
BILL
8
E C 4 5 6 SPLIT
BILL
DEPT 3
DEPT 8
TOTAL9
CLR
1 2 3 TABLE
#DEPT 2
DEPT 7
CHRG CHECK10
0 0 0 .COVE
R
#
DEPT 1
DEPT 6
CASH/ TEND11
-32- DPRTLR.01.01
DEFAULT KEYBOARD LAYOUT
CONVENTIONAL KEYBOARD
RF JF BILL
DEPT 10
DEPT 15
BILL
#N.B.
R/A P/O # / NS
DEPT 9
DEPT 14
PICK
UP
SCRL
UP
DEPT 8
DEPT 13
SPLIT
BILL
SCRL
DOWN
_ -% +% DEPT 7
DEPT 12
TABLE
#
CARD
2
ENT
RELSERV IN
DEPT 6
DEPT 11
COVE
R
#
CARD
1
RET X
TIME
P L U D E P T 5
SUBTOTAL
VOID
7 8 9 D E P T 4
TOTAL
E C 4 5 6 D E P T 3
CHRG
CLR 1 2 3 D E P T
2
CHECK
0 0 0 .D E P T 1
CASH
TEND
-33- DPRTLR.01.01
FUNCTION KEY CODE TABLE
CODE
KEY FUNCTION CODE
KEY FUNCTION
00 NOP 50 CLEAR01 1 51 ERROR CORRECTION02 2 52 VOID03 3 53 ----04 4 54 ----05 5 55 +%106 6 56 +%207 7 57 -%108 8 58 -%209 9 59 -%310 0 60 -%411 00 61 -%512 000 62 BILL NUMBER13 . 63 PICK-UP BILL14 ---- 64 N/B (NEW BALANCE)15 PLU 65 -116 DEPARTMENT NUMBER 66 -217 SERVER ID 67 -318 TABLE NUMBER 68 -419 COVER NUMBER 6920 CASH TENDER/CHANGE 70 X/TIME21 CHECK TENDER 71 ENTRY / RELEASE22 CHARGE TENDER / STUB 72 ----23 SUSPENDER 73 PRINT BILL (SOFT CHECK)24 CARD 2 74 EXCHANGE25 CARD 3 75 X 10.0026 CARD 4 76 X 100.0027 FOREIGN CURRENCY # 77 DEPT SHIFT28 FOREIGN CURRENCY 1 78 PLU SHIFT 129 FOREIGN CURRENCY 2 79 PLU SHIFT 230 FOREIGN CURRENCY 3 80 PLU SHIFT 331 FOREIGN CURRENCY 4 81 PLU SHIFT 432 FOREIGN CURRENCY 5 82 PLU SHIFT 533 ---- 83 PRICE SHIFT 134 ---- 84 PRICE SHIFT 235 TOTAL 85 PRICE SHIFT 336 SUBTOTAL 86 ----37 MESSAGE / MESSAGE# 87 ----38 CARD No. 88 ----39 NON-ADD# / NON SALE 89 ----40 RECEIVED ON ACCOUNT 1 90 SPLIT BILL41 RECEIVED ON ACCOUNT 2 91 ----42 RECEIVED ON ACCOUNT 3 92 ----43 PAID OUT 1 93 SUBTOTAL%+144 PAID OUT 2 94 SUBTOTAL%+245 PAID OUT 3 95 SUBTOTAL%+346 ---- 96 SUBTOTAL%+447 ---- 97 SCROL UP48 ---- 98 SCROL DOWN49 ---- 99 SCALE
100 DIRECT PLU KEY
-34- DPRTLR.01.01
1XX
DIRECT DEPT KEY(XX=01-99: DEPT No.)
200 DIRECT DEPT KEY WITH SHIFT
2XX
MACRO1-15 KEY (XX=01-15:MACRO No.)
-35- DPRTLR.01.01
4. CHANGING ALPHA KEY LAYOUT
OPERATION SEQUENCE
Select "CHANGE ALPHA LAYOUT" in P2 mode main menu and press [CASH] key.
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
● If you select "DATA PRESET MODE", press [CASH] key.
Enter key position number and press [CASH] key. Current alpha key code is indicated to the right side of LCD display.Input new alpha key code ( 2 digits) and press [CASH] key.
●To exit operation, press [TOTAL] key.
Note: Key numbers same as key layout table.
-36- DPRTLR.01.01
CHANGE ALPHA LAYOUT
ENTER KEY No.
DEFAULT ALPHA KEY LAYOUT
The following keys are fixed. [RF] KEY : The Receipt Feed Key [JF] KEY : The Journal Feed Key [ENT/REL] KEY : A CAPITAL LETTER MODE <--> A SMALL LETTER MODE [PLU] KEY : A DOUBLE-WIDE CHARACTER [VOID] KEY : The Back Space Key [CLR] KEY : Clear the Alpha Input Data [CASH] KEY : ALPHA INPUT END [TOTAL] KEY : Finalization of Programming [0][1]-[9] KEY : The Numeric Keys to enter the Alpha Key Code.
STANDARD FLAT KEYBOARD
Alphabet Key Position A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
RF JF
/ [ ] < = > ; : - +
ET PL
U
! @ # $ % ^ & * ( )
VD 7 8 9 1 2 3 4 5 6 7 8 9 0
4 5 6 Q W E R T Y U I O P
C
L
R
1 2 3 A S D F G H J K L
0 Z X C V B N M
CONVENTIONAL KEYBOARD
R
F
JF % A B C D
* # + E F G H
- = / I J K L
( ) ! M N O P
E
T
; : Q R S T
A PLU U
V
D
V
-37- DPRTLR.01.01
W SPACE
C
L
R
X Z
Y
-38- DPRTLR.01.01
CHRACTER CODE TABLE
You may use the following keys with the ALPHA Input Mode.
[PLU] KEY : A DOUBLE-WIDE CHARACTER [ENT/REL] KEY : A CAPITAL LETTER MODE <--> A SMALL LETTER MODE [VOID] KEY : THE BACK SPACE KEY
A C A P I T A L L E T T E R
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
0 00
A 10
K 20
U 30
& 40
: 50
╲ 60
£ 70
È 80
Ö 90
1 01
B 11
L 21
V 31
‘ 41
; 51
] 61
E 71
E 81
Ô 91
2 02
C 12
M 22
W 32
( 42
< 52
^ 62
Å 72
Ë 82
Õ 92
3 03
D 13
N 23
X 33
) 43
= 53
` 63
Á 73
Í 83
Õ 93
4 04
E 14
O 24
Y 34
* 44
> 54
{ 64
À 74
Ì 84
Ù 94
5 05
F 15
P 25
Z 35
+ 45
? 55
| 65
 75
Ï 85
Ü 95
6 06
G 16
Q 26
! 36
, 46
_ 56
} 66
à 76
Ñ 86
Û 96
7 07
H 17
R 27
“ 37
- 47
# 57
~ 67
Ä 77
Æ 87
Ç 97
8 08
I 18
S 28
$ 38
. 48
@ 58
¿ 68
Ê 78
Ó 88
Ÿ 98
9 09
J 19
T 29
% 39
/ 49
[ 59
¡ 69
É 79
Ò 89
sp
99
A S M A L L L E T T E R
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
CODE
0 00
a 10
k 20
u 30
& 40
: 50
╲ 60
¢ 70
è 80
ö 90
1 01
b 11
l 21
v 31
‘ 41
; 51
] 61
Pt
71
e 81
ô 91
2 02
c 12
m 22
w 32
( 42
< 52
^ 62
å 72
ë 82
õ 92
3 03
d 13
n 23
x 33
) 43
= 53
‘ 63
á 73
í 83
ú 93
4 04
e 14
o 24
y 34
* 44
> 54
{ 64
à 74
ì 84
ù 94
5 05
f 15
p 25
z 35
+ 45
? 55
| 65
â 75
ï 85
ü 95
6 06
g 16
q 26
! 36
, 46
_ 56
} 66
ã 76
ñ 86
û 96
7 07
h 17
r 27
“ 37
- 47
# 57
~ 67
ä 77
æ 87
ç 97
-39- DPRTLR.01.01
8 08
I 18
s 28
$ 38
. 48
@ 58
¿ 68
ê 78
ó 88
ÿ 98
9 09
j 19
t 29
% 39
/ 49
[ 59
¡ 69
ê 79
ò 89
sp
99
-40- DPRTLR.01.01
5. CHANGING TRANSACTION DESCRIPTOR
OPERATION SEQUENCE
Select "CHANGE DESCRIPTOR " in P2 mode main menu and press [CASH] key.
●If you select "PRESET REPORT ", press [CASH] key for a program scan.
●If you select "DESCRIPTOR PRESET", press [CASH] key to entry programming mode.
Enter transaction descriptor table number(1-250) and press [CASH] key.
Current descriptor is indicated in 2nd line. Press [VOID] key to erase last character.
Enter new descriptor( 1-200 is 8 characters, 201-250 is 24 characters) refer to the alpha key code table ( 1character is 2 digits) and press [CASH] key.
SEE "ALPHA KEY CODE TABLE
● If you select "DEFALUT ENGLISH ", press [CASH] key to return to default setting.
● To exit operation press [TOTAL] key.
-41- DPRTLR.01.01
CHANGE DESCRIPTOR
ENTER DSC. TBL# 1-250
CHANGE DESCRIPTOR DEPT TTLENTER DSC. TBL# 1-250
TRANSACTION DESCRIPTOR TABLE No.1 : ENGLISH
No.
8 CHARA.
No.
8 CHARA.
No.
8 CHARA.
No.
8 CHARA.
No.
24 CHARACTERS
1 TOT.DEPT
56 MONEXT 4
111
NIVEL 166
RETIRO3
218
**** X1 ****
2 AUDIT. 57 MONEXT 5
112
TECLAPLU
167
COCINA
21
9
**** X2 ****
3 IMP VTA 58 CLIENTE
113
COPIARAM
168
22
0
**** Z1 ****
4 EXENTO
59 CONT.INF
114
IRC 169
22
1
**** Z2 ****
5 IMP 60 NUEVO GT
115
SOLA 170
22
2
VENTAS FRUPO FRPTOS
6 TOT. VTA
61 MONEXTL1
116
ESCLAVA
171
22
3
VENTAS DEPTOS
7 TOT. IMP
62 MONEXTL2
117
MAESTRA
172
NON TXBL
22
4
VENTAS PLU GRUPO1
8 ULT.CF 63 MONEXTL3
118
PRUEBA 173
IMP VENT
22
5
VENTAS PLU GRUPO2
9 ULT.NF 64 MONEXTL4
119
GAVETA 174
IMP VTA1
22
6
VENTAS PLU
10
DPT SHFT
65 MONEXTL5
120
MONTO 175
IMP VTA2
22
7
STOCK PLU
11
PLU SHFT
66 ARQ.TARJ
121
BANDERAS
176
IMP VTA3
22
8
VANTAS CAJERO
12
CANCELAD
67 ARQUEO
122
TABL/TEC
177
IMP 1 22
9
VANTAS X VANDEDORES
13
TOTAL 68 SOB/-FAL
123
DESCRPTS
178
IMP 2 23
0
MENU PLU SALES
14
VT_BRUTA
69 piezas 124
MAXIMO
179
IMP 3 23
1
REPRTE DE TRANSACCIO
15
ANULAR
70 kilos 125
BORR/RAM
180
23
2
VARQUEO DE GAVETA
16
CORREC.
71 libras 126
DEPARTO.
181
DELETE
23
3
VENTAS X HORA NETA
17
BILL No 72 liter 127
COD/PLU
182
PORT 23
4
TRACKING ABIERTO
18
73 gram 12
NRO.MOZO
183
ENT AMT
23
INFORME TTL VENTAS
-42- DPRTLR.01.01
8 519
74 PERIOD
129
CAJERO 184
CARD No.
23
6
NORMAL PLU
20
CONDI. 75 PROGRAM
130
TECLA# 185
BALANCE
23
7
CONDIMENT PLU
21
No.RIF 76 V.NETA 131
MINIMO 186
HALO 23
8
SET-MENU SUB PLU
22
-1 77 GRUPDEPT
132
FECHA 187
LALO 23
9
SET-MENU MAIN PLU
23
-2 78 TECLDPTO
133
HORA 188
LALO# 24
0
************************
24
-3 79 TOT PLU
134
ITEM 189
+%REC1
24
1
** RESETEO DE SISTEMA **
25
REDONDEO
80 EURO 135
NRO.MAQ
190
+%REC2
24
2
* REPORTE IMCOMPLETO *
26
TOT.NETO
81 PLU GRP1
136
FORMATO
191
-%BRUTO1
24
3
LECTURA MEM.FISCAL
27
EFECTIVO
82 PLU GRP2
137
PRECIO 192
-%BRUTO2
24
4
*** FALLA DE PADER ***
28
CHEQUE
83 TL GRUPO
138
VTA MAX#
193
-%BRUTO3
24
5
*** M-S COPIADA ***
29
COBRO VS
84 FEED 139
BANDERA
194
-%BRUTO4
24
6
* M-S COPIADA ERROR *
30
TARJETA
85 EFECTIVO
140
GRUPO 195
-%BURTO5
24
7
**** MAQUINA XX ****
31
-TTL 86 CHEQUE
141
ENLACE#
196
TARA 24
8
**** CONSOLIDADO ****
32
-4 87 COBRO VS
142
VALOR 197
MODEM
24
9
**** M-S ERROR ****
33
88 TARJETA1
143
BLOQ. 198
-TAX 25
0
NGTADJ
34
ANULADO
89 TARJETA2
144
HOLD 199
-TOTAL 25
1
REPRTO DIARIO Z
35
CORREGD
90 TARJETA3
145
LOGO 200
SELECT?
25
2
TRAINING TOTAL
36
No.CF 91 TARJETA4
146
MENSAJE
201
DIVIDIDO
25
3
*** TO BE CONTINUED ***
37
TOT.CF 92 SUB TTL
147
REPORTE
202
NO.CHEQ
25
4
B A L A N C E
38
No.NF 93 VUELTO
14
TITULO 203
NO.MESA
25
** TOTAL DE PERIODO **
-43- DPRTLR.01.01
8 539
TOT.NF 94 TTL 149
TASA/CAM
204
NO.CLIEN
25
6
EURO TOTAL =
40
APERTURA
95 PROMOC.
150
TRAINING
205
SALD.ANT
25
7
** BIEN VENIDO **
41
F/C EFVO
96 AVERGE
151
CLAVE 206
SALD.NVO
25
8
OPEN TRACKING
42
F/C CHEQ
97 *CANCEL*
152
VTA MAX
207
TRANSFER
25
9
SET MENU SALES
43
1Euro =
98 MACRO
153
COMBO 208
CONSOLI.
26
0
TRACKING OVER
44
RET.EFVO
99 TOT. 154
STOCK 209
COMBO
26
145
RET.CHEQ
100
-ANULAR-
155
NUMERO
210
CONDI. 26
246
ARQ.EFVO
101
CANT.ART
156
TECLA 211
COLLECT
47
ARQ.CHEQ
102
CAMBIO
157
ACTIVO 212
BACKUP
48
TARJETA1
103
STOCK LK
158
BLOQ.COD
213
COCINA
49
TARJETA2
104
INICIO 159
ANTERIOR
214
PLATO
50
TARJETA3
105
STOP 160
ACTUAL 215
IN TIME
51
TARJETA4
106
TOT.F/C
161
FONDO1
216
OUT TIME
52
ARQ.COBR
107
TOT.RET.
162
FONDO2
217
WORKING
53
MONEXT 1
108
TASA IMP
163
FONDO3
54
MONEXT 2
109
ALFANUM
164
RETIRO1
55
MONEXT 3
110
ACTUAL
165
RETIRO2
-44- DPRTLR.01.01
6. SETTING SERIAL PORT
Select "SETTING SERIAL PORT" in P2 mode main menu and press [CASH] key. If you select "MAIN BOARD PORT #1 ", press [CASH] key to select main board port #1. If you select "MAIN BOARD PORT #2 ", press [CASH] key to select main board port #2. If you select "OPTION BOARD PORT #3", press [CASH] key to select option board port #3. If you select "OPTION BOARD PORT #4", press [CASH] key to select option board port #4.
Enter communication format value and press [CASH] key.
Enter connection item value and press [CASH] key.
Enter communication speed value and press [CASH] key.
If you select "PRESET REPORT ", press [CASH] key for a program scan.
Note: To exit operation press [TOTAL] key. I.R.C. network connection is only available to connect with PORT #2. PC is only available to connect with PORT #1.
COM FORMAT CONNECT ITEM COM SPEED
** The Kitchen printer port is fixed to port #4
-45- DPRTLR.01.01
SETTING SERIAL PORT
ENTER COM FORMAT
SETTING SERIAL PORT
ENTER COM SPEED 1 0
SETTING SERIAL PORT
ENTER CONNECT ITEM
Cautions: Port #2 is fixed for I.R.C. by hardware setting. Not to plug any other device into port #2. If you want to use it as RS-232C serial port, you must modify the main board following another instructions. Please don’t change its configuration without main board modifications.
Flag Value
Data Parity
0 8 bit non1 8 bit even2 8 bit odd3 ---- ----4 7 bit non5 7 bit even6 7bit odd
Flag Value
Connectiondevice
0 not used1 Bill printer2 Scanner / Ex. Display3 Scale4 PC / Scanner5 I. R. C.6 Modem7 ** Kitchen Printer
Flag Value
CommunicationSpeed
0 19200 bps1 9600 bps2 4800 bps
7. BILL PRINTER FORMAT
OPERATION SEQUENCE
In this section, you can program some parameter for the BILL printer.The ECR supports two kinds of printer for bill(check) printing. One is a slip printer (EPSON TM295) for a designated form and the other is one-station terminal printer(EPSON TM300 series) for rolled paper.
Select "BILL PRINTER FORMAT" in P2 mode main menu and press [CASH] key.● If you select "PRESET FEED LINE ", press [CASH] key to entry programming mode.
The number, which is entered, has different means according to the kind of the printer.
It’s number of line feed before printing to the slip printer.And it’s number of line feed after printing to the type of one-station printer.
Enter number of line feed and press [CASH] key. ●If you select "PRESET PRINT LINE ", press [CASH] key to entry programming mode.
The number, which is entered, is only for the slip printer and has no meaning for thetype of one-station printer.
Enter number of maximum printing line and press [CASH] key.●If you select "SLIP HEADER LINE n", press [CASH] key to entry slip header programming
mode.
The header messages affect to the both type of printers. If you select "PRESET REPORT ", press [CASH] key for a program scan.
To exit operation press [TOTAL] key.
8. PROGRAM VERSION DISPLAY
Select "VERSION No. DISPLAY" in P2 mode main menu and press [CASH] key.
Current ROM version indicated on the last line. Press [CLR] key to exit.
9. RAM COPY (IRC)
Select "IRC RAM COPY" in P2 mode main menu and press [CASH] key. And enter slave number and press [CASH] key. If want to select all ECR, press [CASH] key without any number.
Press [TOTAL] key to exit.
The Master ECR will copy all preset data to the selected Slave ECR exceptDATE, TIME, CONSECUTIVE No., MACHINE No., PASSWORD, LOGO STAMP MESSAGE, detail slip format and Serial Port Programming. This operation does not affect to sales report data except PLU sales.
The PLU sales data and detail slip preset data are cleared after this operation.
-46- DPRTLR.01.01
ROM VERSION No. X.XX
10. SYSTEM TEST
Select "SYATEM TEST" in P2 mode main menu. And enter test port number and [CASH] key.
Note: 1 : SERIAL COMMUNICATION TEST (RS-232C) : Port#1 2 : SERIAL COMMUNICATION TEST (RS-485) : Port#2
3 : SERIAL COMMUNICATION TEST (RS-232C) : Port#3 4 : SERIAL COMMUNICATION TEST (RS-232C) : Port#4
11. SYSTEM RESET
The system reset operation should be done after changing program E-PROM or repairing.
POWER OFF - + -------> POWER ON
+
Press three keys during turning power on.
Note: All programming and report data will not be cleared.
12. SYSTEM RESET & DEFAULT KEYBOARD PROGRAMMING
POWER OFF - + -------> POWER ON
+
Press three keys during turning power on.
Note: The Key Layout and the ALPHA Key Layout will be programmed for the default value. The Shift Table of Direct PLU and Direct DEPARTMENT Key will be cleared. The other preset data and the report data will be kept.
-47- DPRTLR.01.01
To operate this test sequence, you must connect special loop-back connectorto each port except port#2(RS485).
III. P R O G R A M M I N G A T ' P 1 ' P O S I T I O N
1. DEPARTMENT PROGRAMMING
Select "DEPARTMENT PROGRAM" in P1 mode main menu and press [CASH] key.
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
● If you select "CORRECTION, CREATE ", press [CASH] key to correct or create new data.
Enter dept number(1-99) and press [CASH] or direct [DEPT] key.
Enter linked tax flag (1-15) and press [CASH] key
Current name is indicated 2nd line.Press [VOID] key to erase last character.
Enter new dept name( MAX 14 characters) by using alpha key code( 1character 2 digits) and press [CASH] key.
-48- DPRTLR.01.01
DEPARTMENT PROGRAM
ENTER DEPT No.
DEPARTMENT PROGRAM
ENTER LINKED TAX FLG
DEPARTMENT PROGRAM
ENTER NAME1
ATAX4TAX3TAX2TAX100-----------01--------○02-----○---03-----○○04--○------05--○---○06--○○---07--○○○08○---------09○------○10○---○---11○---○○12○○------13○○---○14○○○---15○○○○
Non TAXTAX1TAX2
TAX3
TAX4
Enter unit price and press [CASH] key.
Enter HALO table number(1-15) and press [CASH] key.
Enter 8 digits number for FLAG A,B,C and D and press [CASH] key.
Enter department group number(0-10) and press [CASH] key.
Enter LALO table number(1-15) and press [CASH] key.
-49- DPRTLR.01.01
DEPARTMENT PROGRAMDEPT-0001ENTER UNIT PRICE1 0.00
DEPARTMENT PROGRAMDEPT-0001ENTER HALO TABLE No.
DEPARTMENT PROGRAMDEPT-0001ENTER OPT FLAG VALUE
DEPARTMENT PROGRAMDEPT-0001ENTER DEPT GROUP No.
DEPARTMENT PROGRAMDEPT-0001ENTER LALO TABLE No.
OPTIONSx x x x x x x x
A B C D
● If you select "DELETE ", press [CASH] key to delete programming data.
Enter delete department number(1-99) and press [CASH] key.
Note: This operation is permitted only when all sales report total is zero.
● To exit operation, press [TOTAL] key.
● To return to previous operation, press [SUBTOAL] key.
-50- DPRTLR.01.01
DEPARTMENT PROGRAM
ENTER DEPT No.
B CompulsoryCondiment
CompulsoryMessage
Repeat
-able
Unit PriceAvailable
00 no no no no01 no no no yes02 no no yes no03 no no yes yes04 no yes no no05 no yes no yes06 no yes yes no07 no yes yes yes08 yes no no no09 yes no no yes10 yes no yes no11 yes no yes yes12 yes yes no no13 yes yes no yes14 yes yes yes no15 yes yes yes yesD Kitchen
Printer
00 No print01 Printed to KP#102 Printed to KP#203 Printed to KP#304 Printed to KP#405 Printed to Receipt
printer as ticket.
C WeightItem
00 Piece01 Kilogram02 Pound
A SingleItem
Not used
Not used
Price included ADD-ON Tax
00 no --- --- no01 no --- --- yes02 --- --- --- ---03 --- --- --- ---04 --- --- --- ---05 --- --- --- ---06 --- --- --- ---07 --- --- --- ---08 yes --- --- no09 yes --- --- yes10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---
2. PLU PROGRAMMING
Operation sequence is similar to DEPARTMENT programming.Before starting, please check the value of option flag 3 and 4. If you want to change basic format of PLU database, please change th ese option flag s value first.
The machine supports 4 kinds of PLU category type.
Kind of PLUs Explanation 1 Normal PLU It’s used as general item.
You can use 13 digits for PLU code.It can link condiment PLUs
2 Condiment PLU It’s used with a normal PLU as condiment item.Therefore, it can't be used individually. The maximum digits of the PLU code are six digits.
3 Sub PLU for SET-MENU It’s used as one of the set menus.The price is added to the linked main PLU.Therefore, it can't be used individually.The maximum digits of the PLU code are six digits.It can link condiment PLUs like a normal PLU.
4 Main PLU for SET-MENU
It can't be used separately under the condition which Sub PLU is not at all in because of it has noindividual information without name and PLU code. The maximum digits of the PLU code are six digits.
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
● If you select "NORMAL PLU PROGRAM ", press [CASH] key to correct or create new data.
2-1. Normal PLU CRRECTION and CREATE 1) Enter correction or create PLU number and press [CASH] key. 2) Enter linked department number(1-99) and press [CASH] key. 3) Enter PLU name(See alpha key code table) and press [CASH] key. You can select length of name(14 or 12characters) by option flag 4 4) Enter normal unit price(Max. 8 digits) and press [CASH] key.
You can select level of price 1 or 3 by option flag 4 5) Enter linked TAX number(1-4) and press [CASH] key. If non-taxable, enter '0'. Linked Department Flag by Option Flag No.3 6) Enter HALO table number(0-15) and press [CASH] key. 7) Enter 8 digits number for PLU option flag A,B,C and D then press [CASH] key.
Refer to Normal PLU option flag table 8) Enter PLU group1 number(0-20) and [CASH] key. 9) Enter PLU group2 number(0-40) and [CASH] key. 10) Enter LALO table number(0-15) and press [CASH] key. 11) Enter unit price2(Max 8 digits) and [CASH] key.. If 3 levels price is not selected, this item is skipped. Refer to option flag #4 12) Enter unit price3(Max. 8 digits) and [CASH] key. If 3 levels price is not selected, this item is skipped. Refer to option flag #4
-51- DPRTLR.01.01
14) Enter Format1 Code of Condiment PLU (4 digits) and [CASH] key. Example : Format Code is 5241. The 5th digit of condiment PLU code is 2 and the 4th digit is 1. Condiment PLU code of 6 digits is '?21???'. 15) Enter Format2 Code of Condiment PLU (4 digits) and [CASH] key. 16) Enter Format3 Code of Condiment PLU (4 digits) and [CASH] key. 17) Enter Format4 Code of Condiment PLU (4 digits) and [CASH] key. 18) Enter Format5 Code of Condiment PLU (4 digits) and [CASH] key. 19) Return to 1). If want to new PLU preset 2) to 18), then press [PLUn] key or enter PLU number and [PLU] key or scanning.
● Normal PLU option flag
OPTIONSx x x x x x x x A,B: Linked Department Flag by Option Flag No.3
C: OPEN/BLOCK Only PLU FlagA B C D
OPEN/BLOCK: If you want to set unused PLU temporarily, select BLOCK item.
-52- DPRTLR.01.01
A SingleItem
Not used
Not used
Price included ADD-ON Tax
00 no --- --- no01 no --- --- yes02 --- --- --- ---03 --- --- --- ---04 --- --- --- ---05 --- --- --- ---06 --- --- --- ---07 --- --- --- ---08 yes --- --- no09 yes --- --- yes10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---
B CompulsoryCondiment
CompulsoryMessage
Repeat
-able
Open
Price
00 no no no no01 no no no yes02 no no yes no03 no no yes yes04 no yes no no05 no yes no yes06 no yes yes no07 no yes yes yes08 yes no no no09 yes no no yes10 yes no yes no11 yes no yes yes12 yes yes no no13 yes yes no yes14 yes yes yes no15 yes yes yes yes
C Block / Open WeightItem
00 Open Piece01 Open Kilogram02 Open Pound08 Block Piece09 Block Kilogram10 Block Pound
D KitchenPrinter
00 No print01 Printed to KP#102 Printed to KP#203 Printed to KP#304 Printed to KP#405 Printed to Receipt
printer as ticket.
● If you select "CONDIMENT PLU PROG.", press [CASH] key to correct or create new data.
2-2. Condiment PLU CRRECTION and CREATE Condiment PLU called by NORMAL PLU or SUB PLU. The PLU Name may be printed. The price is not printed. The price is added to NORAML PLU or SUB PLU.
1) Enter correction or create PLU number and press [CASH] key. Condiment PLU numbers always 6 digits.(Not Allow Option Flag) 2) Enter PLU name(See alpha key code table) and press [CASH] key. You can select length of name(16 or 12characters) by option flag 4
3) Enter normal unit price(Max. 8 digits) and press [CASH] key. 4) Enter 2 digits number for PLU option flag and press [CASH] key.
Refer to Condiment PLU option flag table
5) Enter unit price2(Max 8 digits) and [CASH] key.. If 3 levels price is not selected, this item is skipped. Refer to option flag #4
6) Enter unit price3(Max. 8 digits) and [CASH] key. If 3 levels price is not selected, this item is skipped. Refer to option flag #4
7) Return to 1). If want to new PLU preset 2) to 6), then press [PLUn] key or enter PLU number and [PLU] key.
Condiment PLU option flag
OPTIONS0 0 0 0 0 0 0 0 Not used
A B C D
-53- DPRTLR.01.01
● If you select "SUB PLU PROGRAMMING", press [CASH] key to correct or create new PLU.
2-3. Sub PLU CRRECTION and CREATE The PLU name, the price and Tax symbol may be printed. The price added to MAIN PLU.
1) Enter correction or create PLU number and press [CASH] key. The maximum number of the code are always 6 digits.(Not Allow Option Flag) 2) Enter linked department number(1-99) and press [CASH] key. 3) Enter PLU name(See alpha key code table) and press [CASH] key. You can select length of name(14 or 12characters) by option flag #4. 4) Enter normal unit price(Max. 8 digits) and press [CASH] key.
You can select level of price 1 or 3 by option flag #4. 5) Enter linked TAX number(1-4) and press [CASH] key. If non-taxable, enter '0'. Linked Department Flag by Option Flag #3. 6) Enter HALO table number(0-15) and press [CASH] key. 7) Enter 8 digits number for PLU option flag A,B,C and D then press [CASH] key.
Refer to SUB PLU option flag table 8) Enter PLU group1 number(0-20) and [CASH] key. 9) Enter PLU group2 number(0-40) and [CASH] key. 10) Enter LALO table number(0-15) and press [CASH] key. 11) Enter unit price2(Max 8 digits) and [CASH] key.. If 3 levels price is not selected, this item is skipped. Refer to option flag #4 12) Enter unit price3(Max. 8 digits) and [CASH] key. If 3 levels price is not selected, this item is skipped. Refer to option flag #4 13) Enter Format1 Code of Condiment PLU (4 digits) and [CASH] key. Example : Format Code is 5241. The 5th digit of condiment PLU code is 2 and the 4th digit is 1. Condiment PLU code of 6 digits is '?21???'. 14) Enter Format2 Code of Condiment PLU (4 digits) and [CASH] key. 15) Enter Format3 Code of Condiment PLU (4 digits) and [CASH] key. 16) Enter Format4 Code of Condiment PLU (4 digits) and [CASH] key. 17) Enter Format5 Code of Condiment PLU (4 digits) and [CASH] key. 18) Return to 1). If want to new PLU preset 2) to 18), then press [PLUn] key or enter PLU number and [PLU] key.
-54- DPRTLR.01.01
SUB PLU option flag
OPTIONSx x x x 0 0 x x A,B,D: Linked Department Flag by Option Flag No.3
C: Not usedA B C D
-55- DPRTLR.01.01
B CompulsoryCondiment
CompulsoryMessage ---
Open
Price
00 no no --- no01 no no --- yes02 no no --- no03 no no --- yes04 no yes --- no05 no yes --- yes06 no yes --- no07 no yes --- yes08 yes no --- no09 yes no --- yes10 yes no --- no11 yes no --- yes12 yes yes --- no13 yes yes --- yes14 yes yes --- no15 yes yes --- yes
D KitchenPrinter
00 No print01 Printed to KP#102 Printed to KP#203 Printed to KP#304 Printed to KP#405 Printed to Receipt
printer as ticket.
A Notused
Not used
Not used
Price included ADD-ON Tax
00 --- --- --- no01 --- --- --- yes02 --- --- --- ---03 --- --- --- ---04 --- --- --- ---05 --- --- --- ---06 --- --- --- ---07 --- --- --- ---08 --- --- --- ---09 --- --- --- ---10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---
● If you select "MAIN PLU PROGRAM ", press [CASH] key to correct or create new data.
2-4. MAIN PLU CRRECTION and CREATE MAIN PLU is the title PLU of SET-MENU. After programming MAIN PLU and SUB PLU, you must program SET-MENU table.
1) Enter correction or create PLU number and press [CASH] key. MAIN PLU numbers always 6 digits.(Not Allow Option Flag) 2) Enter PLU name(See alpha key code table) and press [CASH] key. You can select length of name(14 or 12characters) by option flag 4 3) Enter linked TAX number(1-15) and press [CASH] key. If non-taxable, enter '0'. Linked Department Flag by Option Flag No.3 4) Enter 8 digits number for PLU option flag B and C then press [CASH] key.
Refer to SUB PLU option flag table 5) Return to 1). If want to new PLU preset 2) to 4), then press [PLUn] key or enter PLU number and [PLU] key.
MAIN PLU option flag
OPTIONS0 0 x x x x 0 0 B: Linked Department Flag by Option Flag No.3
C: Only PLU FlagA B C D
OPEN/BLOCK: If you want to set unused PLU temporarily, select BLOCK item.
-56- DPRTLR.01.01
B Sub PLUPrint ---
Repeat
-able---
00 yes --- yes ---01 yes --- yes ---02 yes --- no ---03 yes --- no ---04 yes --- yes ---05 yes --- yes ---06 yes --- no ---07 yes --- no ---08 no --- yes ---09 no --- yes ---10 no --- no ---11 no --- no ---12 no --- yes ---13 no --- yes ---14 no --- no ---15 no --- no ---
C BlockOpen
00 open01 open02 open03 open04 open05 ---06 ---07 ---08 bloc
k09 ---10 ---11 ---12 ---13 ---14 ---15 ---
● If you select "DELETE ", press [CASH] key to delete PLU file.
Enter PLU number that you want to delete and [CASH] key.
Note: This operation is permitted only when all sales report total is zero.
● To exit operation, press [TOTAL] key.
● To return to previous operation, press [SUBTOAL] key.
-57- DPRTLR.01.01
3. PLU COMMON STOCK FILE PROGRAMMING
The Common Stock file exists in the independence. And all PLUs can link to five kind ofstock file instead of doing not have individual simple stock data.
The number of PLU code, which is linked to a stock file, should be less than 6 digits. Select "STOCK FILE PROGRAM " in P1 mode main menu and press [CASH] key.
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
● If you select "CORRECTION, CREATE ", press [CASH] key.
Enter stock number (MAX 4 digits) and press [CASH] key.
Current name is indicated 2nd line. Press [VOID] key to erase last character.
Enter new stock name (MAX 16characters) by using alpha key code (1chractor 2digits) and press [CASH] key.
Select stock unit and press [CASH] key.
Enter deduction stock value with decimal and press [CASH] key. 0 = No stock check.
Case of warning count 10 ---- > 10 (If not enter decimal part, this value is ten as integer.)
If stock count < warning stock count, then intermittent buzzer. If stock count < deduction stock value, then error display
● If you select "DELETE ", press [CASH] key to delete programming data.
Enter stock file number that you want to delete and [CASH] key.
● To exit operation, press [TOTAL] key.
-58- DPRTLR.01.01
STOCK FILE PROGRAM
ENTER STOCK No.
STOCK FILE PROGRAMSTOCK NAME 0001ENTER NAME
STOCK FILE PROGRAM PIECE GRAM
STOCK FILE PROGRAM
ENTER WARNING
4. PLU LINKED STOCK FILE PROGRAMMING
As for all PLUs except for Condiment and Main PLU can link to five kindof stock file.
The number of PLU code, which is linked to a stock file, should be less than 6 digits.
Select "PLU STOCK LINK PROG." in P1 mode main menu and press [CASH] key.
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
● If you select "CORRECTION, CREATE ", press [CASH] key.
Enter PLU number, which link to the stock file and press [CASH] key. The number of PLU code, which is linked to a stock file, should be less than 6 digits.
Enter number of stock file, which you made and press [CASH] key.
Enter deduction stock value with decimal and press [CASH] key.
Case of deduction value 2 ---- > 2 (If not enter decimal part, this value is two as integer.)
Stock number and deduction value entry is 5 times repetition.
● If you select "DELETE ", press [CASH] key to delete programming data. Enter collective PLU number that you want to delete and [CASH] key.
● To exit operation, press [TOTAL] key.
-59- DPRTLR.01.01
PLU STOCK LINK PROG
ENTER PLU No.
PLU STOCK LINK PROG ENTER STOCK No.
PLU STOCK LINK PRG.
ENT DEDUCTION
5. PLU PRICE CHANGE OPERATION SEQUENCE
Select "PLU PRICE CHANGE" in P1 mode main menu and press [CASH] key.
Enter PLU number and press [CASH] key.
Enter new PLU price and press [CASH] key.
Note: To exit operation, press [TOTAL] key.
6. COMMERCIAL MESSAGE
OPERATION SEQUENCE
Select "COMMERCIAL MESSAGE" in P1 mode main menu and press [CASH] key.
● If you select "PRESET PRINT LINE"
Enter number of line(0-5).
Note: When this number is zero any commercial messages will not be printed. ● If you select "PRESET MSG LINEn ", press [CASH] key. Then enter new message (MAX 24 characters).
Enter line-n message by using alpha key code. 1 character need 2 digits alpha key code.
Note: To exit operation, press [TOTAL] key.
-60- DPRTLR.01.01
PLU PRICE CHANGE
ENTER PLU No. 0
PLU PRICE CHANGE
ENTER UNIT PRICE 1 0.00
7. DIRECT PLU KEY PROGRAMMING (MAX. 100/130 KEYS)
Three types of PLU SHIFT function are available. Type 1 is PLU SHIFT for PLU Shift Key. Type 2 is PLU SHIFT for Management Control. Type 3 is PLU SHIFT for Time Shift. Table Image sample: in case of selecting 6digits PLU code;
TABLE # 1 2 3 4
---
---
99 100
SHIFT level 1 100001
100002
100003
100004
100099
200000
SHIFT level 2 200001
200002
200003
200004
200099
300000
SHIFT level 3 300001
300002
300003
300004
300099
400000
SHIFT level 4 400001
400002
400003
400004
400099
500000
SHIFT level 5 500001
500002
500003
500004
500099
600000
PLU CODE
You can program 5 or 3 different PLU codes as each shift level to a physical direct PLU key. (Maximum level number 5 or 3 is depend on the option Flag No.3-[2].)
● Select "DIRECT PLU KEY TABLE" in P1 mode main menu.
(1) Select "PRESET DIRECT TABLE" to make tables, press [CASH] key.
*) If the option Flag No.3-[2] is selected max number 100, it is not available to enter over 100.
(2) Enter start table number(1-130) and press [CASH] key.
(3) Press programmed direct PLU key.Table number is incremented automatically.
(4) After making tables you need, Enter [TOTAL] key to exit from this mode.
Note: If want to cancel table data, enter '0' and then press [CASH] key.
-61- DPRTLR.01.01
DIRECT PLU KEYTABLE
ENTER TABLE No.1-
DIRECT PLU KEYTABLE
PRESS DIRECT PLU
Note:First of all, you must program some DIRECT PLU KEYS on the Keyboard.The Maximum key number is selectable by the option Flag No.3-[2].See CHANGING KEY LAYOUT('P2' position). And then you must select PLU shift type by the option Flag No.7-[3] before programming direct PLU key table.
5-2 Select "DIRECT PLU KEY TABLE" in P1 mode main menu again.
(1) Select "PRESET KEY ASSIGN " to assign PLU code to the table, press [CASH] key.
*) If the option Flag No.3-[2] is selected max level 3, it is not available shift 4,5.
(2) Enter shift number (1-5) and press [CASH] key. Each table has each 5 shift levels.
*) If the option Flag No.3-[2] is selected max number 100, it is not available to enter over 100.
(3) Enter start table number and press [CASH] key.
(4) Enter PLU code and press [CASH] key. Table number is incremented automatically.
If you want to decrement table number, press [SUBTOAL] key.
(5) If you want to program for next shift level, press [TOTAL] to exit this mode and then repeat sequence.
● If you select "Management control” in the Option Flag No.7-[3],The item “CURRENT SHIFT No. " is added to sub menus.
Press [CASH] key to entry.
*) If the option Flag No.3-[2] is selected max level 3, it is not available shift 4,5.
Enter current shift number (1-5) and press [CASH] key.
Note: Current shift number effective PLU shift TPYE 2. If you want to cancel current shift number, enter '0' and [CASH] key.
-62- DPRTLR.01.01
DIRECT PLU KEYTABLE
ENTER SHIFT No. 1-
DIRECT PLU KEYTABLE
ENTER TABLE No.1-
DIRECT PLU KEYTABLE
ENTER PLU No.
DIRECT PLU KEYTABLE
ENTER CURRENT
SELECT OPERATION PRESET KEY ASSIGN PRESET REPORT
● If you select "Time Shift” in the Option Flag No.7-[3],The item “TIME SHIF TABLE” is added to sub menus.
Press [CASH] key to entry.
*) If the option Flag No.3-[2] is selected max level 3, it is not available shift 4,5.
Enter timetable number (1-5) and press [CASH] key.
Enter start time (HH,MM 4 digits) and press [CASH] key.
Note: You can select PLU code lengths 6 or 13 digits. (See option flag No.3)
*) If the option Flag No.3-[2] is selected max level 3, it is not available shift 4,5.
Enter shift number and press [CASH] key.
Note: Time shift table affects to PLU shift TPYE 3. DIRECT PLU KEY will shift automatically by Time. TIME = 0:00 is Cancel. 0:00 of midnight is 24:00. Arrange TIME in order of small size.
EXAMPLE of TIME TABLE
Time Table No.
TIME SHIFT
1 8:30
5 8:30-11:29 Shift level 5 is applicable
2 11:30
2 11:30-14:30 Shift level 2 is applicable
3 14:30
1 14:30-18:00 Shift level 1 is applicable
4 18:00
4 18:00-20:00 Shift level 4 is applicable
5 20:00
3 20:00- 8:30 Shift level 3 is applicable
-63- DPRTLR.01.01
DIRECT PLU KEYTABLE
ENTER TIME TABLE
DIRECT PLU KEYTABLE
ENT TIME 00:00-
DIRECT PLU KEYTABLE
ENTER SHIFT No. 1-
SELECT OPERATION PRESET KEY ASSIGN PRESET REPORT
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
● To exit operation, press [TOTAL] key.
-64- DPRTLR.01.01
8. SET-MENU PROGRAMMING
Select "SET-MENU PROGRAM " in P1 mode main menu and press [CASH] key.
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
● If you select "CORRECTION, CREATE ", press [CASH] key.
Enter SET-MENU Main PLU number and press [CASH] key. SET-MENU Main PLU numbers always 6 digits.(Not Allow Option Flag)
Enter SET-MENU SUB PLU number and press [CASH] key. SET-MENU SUB PLU numbers always 6 digits.(Not Allow Option Flag)
Select SUB PLU is FIXED or SELECTABLE and press [CASH] key.
Note:If you select ‘SELECTABLE SUB PLU’, you can select if it registers by using[PLU] or [VOID] key.
SUB PLU number and fixed or choice selection entry is 10 times repetition.
● If you select "DELETE ", press [CASH] key to delete programming data. Enter SET-MENU MAIN PLU number that you want to delete and [CASH] key.
● To exit operation, press [TOTAL] key.
-65- DPRTLR.01.01
SET-MENU PROGRAM
ENTER PLU No.
SET-MENU PROGRAM
ENTER SUB PLU No.
SET-MENU PROGRAM FIXED SUB PLU SELECTABLE SUB
9. COOKING INSTRUCTION PROGRAMMING
Select "COOKING INST. MESSAGE" in P1 mode main menu and press [CASH] key.
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
● If you select "CORRECTION, CREATE ", press [CASH] key.
Enter link message number (1-99) and press [CASH] key.
Current message is indicated 2nd line. Press [VOID] key to erase last character.
Enter new message (MAX 18characters) by using alpha key code (1chractor 2digits) and press [CASH] key.
Enter flag value 0 or 1 and press [CASH] key.
● If you select "DELETE ", press [CASH] key to delete programming data.
Enter link message number that you want to delete and [CASH] key.
● To exit operation, press [TOTAL] key.
-66- DPRTLR.01.01
COOKING INST.MESSAGE
ENT LINK MESSAGE
COOKING INST.MESSAGELINK MESSAGE 01ENTER LINK
COOKING INST.PRESETLINK MESSAGE 01ENTER OPT FLAG
Print on BILL/Receipt
00
not printed
0 printed
10. SERVER(CLERK)-ID NUMBER and NAME (MAX 99 SERVERS)
Select "SERVER PROGRAMMING" in P1 mode main menu and press [CASH] key.
● If you select "CORRECTION, CREATE ", press [CASH] key.
Enter SERVER number(1-99) and press [CASH] key.
Enter SERVER secret number (MAX 6 digits) and press [CASH] key.
Enter SERVER name(Max. 8 characters) by using alpha key code( 1 character 2 digits) and press [CASH] key.
● If you select "DELETE ", press [CASH] key.
Enter SERVER number(1-99) that you want to delete.
Note: This operation is permitted only when all sales report total is zero.
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
● To exit operation, press [TOTAL] key.
-67- DPRTLR.01.01
SERVER ID PROGRAM
SERVER TABLE No.
SERVER ID PROGRAM
SERVER ID MAX
SERVER ID PROGRAM SERVER001SERVER NAME 8
SERVER ID PROGRAM SERVER TABLE No.
11. MACHINE No.
Select "MACHINE No. PROGRAM" in P1 mode main menu and press [CASH] key.
Enter machine number(1-99)
Note: When using PC communication or I.R.C this machine number must be programmed as a machine ID.
12. REPORT P2MODE PASSWORD
Select "PASSWORD PROGRAMMING" in P1 mode main menu and press [CASH] key. Select X/Z/P Mode password or P2 MODE password.
Enter password number(Max. 4 digits) and press [CASH] key.
-68- DPRTLR.01.01
PASSWORD PROGRAM
ENTER PASSWORD
MACHINE No. PROGRAM
ENTER MACHINE No.
13. TAX RATE (TAX1 – TAX4)
Select "TAX RATE PROGRAMMING" in P1 mode main menu and press [CASH] key.
● If you select "STRAIGHT TAX RATE", press [CASH] key.
Enter percent rate (including three decimal parts) for tax 1 and press [CASH] key.Note: TAX rate is 4 digits. (00.00% - 99.99%)
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
-69- DPRTLR.01.01
TAX RATE PROGRAMTAX 1ENT TAX RATE
14. LOCK OUT AMOUNT TABLE (HALO/LALO TABLE)
Select "HALO TABLE PROGRAM" in P1 mode main menu and press [CASH] key.
You can use 16 kinds of HALO table.
Enter HALO value (MAX. 8 digits) and press [CASH] key.
You can use 15 kinds of LALO table.
Enter LALO value (MAX. 8 digits) and press [CASH] key.
● To exit operation, press [TOTAL] key.
● To go back, press [SUBTOTAL] key.
-70- DPRTLR.01.01
HALO TABLE PROGRAM
ENTER HIGH
LALO TABLE PROGRAM
ENTER LOW
15. GROUP NAME for REPORT
Select "GROUP NAME PROGRAM" in P1 mode main menu and press [CASH] key. ● If you select "DEPARTMENT GROUP", press [CASH] key.
Enter department group number (1-10) and press [CASH] key.
Enter department group name and press [CASH] key.After inputting department group name, return to table number input mode.
● If you select "PLU GROUP1 ", press [CASH] key.
Enter PLU group1 number (1-20) and press [CASH] key.
Enter PLU group1 name and press [CASH] key.After inputting PLU group1 name, return to table number input mode.
● If you select "PLU GROUP2 ", press [CASH] key.
Enter PLU group2 number (1-40) and press [CASH] key.
Enter PLU group2 name and press [CASH] key.After inputting PLU group2 name, return to table number input mode.
Note: Group name size is 12 digits.
● To exit operation, press [TOTAL] key.
-71- DPRTLR.01.01
GROUP NAME PROGRAM
ENTER DEPT GROUP
GROUP NAME PROGRAM
ENTER NAME
GROUP NAME PROGRAM
ENTER NAME
GROUP NAME PROGRAM
ENTER PLU GROUP1
GROUP NAME PROGRAM
ENTER PLU GROUP2
GROUP NAME PROGRAM
ENTER NAME
16. DIRECT DEPT KEY WITH SHIFT PROGRAMMING (MAX. 40 KEYS)
First of all, you must program some DIRECT DEPT KEYS WITH SHIFT on the Keyboard.See CHANGING KEY LAYOUT.
DIRECT DEPT KEY will shift by pressing the DEPT SHIFT KEY.
Select "DIRECT DEPT KEY TABLE" in P1 mode main menu and press [CASH] key. ● If you select "PRESET DIRECT TABLE", press [CASH] key.
Enter start table number (1-40) and press [CASH] key.
Press direct DEPT key.
Note: If want to cancel table data, then enter '0' and [CASH] key.
● If you select "PRESET KEY ASSIGN ", then PLU code is assigned to each table. Select "SHIFT OFF MODE" or "SHIFT ON MODE"
Enter start table number and press [CASH] key.
Enter department number and press [CASH] key. Table number is incremented automatically. If you want to decrement table number, press [SUBTOAL] key.
EXAMPLE of Shift Table
TABLE # 1 2 3 4 38
39
40
DIRECT DEPT KEY No.
49 48 47 46
SHIFT TABLE No. DEPT No.1 : DEPT SHIFT OFF
1 2 3 4
2 : DEPT SHIFT ON 21 22 23 24
-72- DPRTLR.01.01
DIRECT DPT KEYTABLE
PUSH DIRECT DEPT
DIRECT DPT KEYTABLE
ENTER TABLE No.1-
DIRECT DPT KEYTABLE
ENTER DEPT No.
DIRECT DPT KEYTABLE
ENTER TABLE No.1-
● If you select "PRESET REPOT ", press [CASH] key for a program scan.
-73- DPRTLR.01.01
17. CASHIER NAME and LINKED DRAWER
Select "CASHIER PROGRAMMING" in P1 mode main menu and press [CASH] key.
Enter cashier number (1-4) and press [CASH] key.
Enter cashier name. (See alpha key code table)
Select cashier linked drawer. After selecting cashier linked drawer, press [CASH] key.
● To exit operation, press [TOTAL] key.
-74- DPRTLR.01.01
CASHIER PROGRAMMING
ENTER CASHIER
CASHIER PROGRAMMING
ENTER NAME
SELECT USED DRAWER NO USED DRAWER USED DRAWER A
18. PERCENTAGE DISCOUNT/ADD-ON KEY
Select "%DISCOUNT %ADD-ON" in P1 mode main menu and press [CASH] key. ● Select preset item.
Enter percentage rate with decimal point. Note: Rate is 2digits(integer) + 3digits(decimal). In case of 10%, input only integer 10. In case of 10.005%, input 10 and 005 after decimal point.
Enter upper limit percentage rate.
Enter option flag.
Enter option flag. After inputting linked tax flag, return to percentage item selection mode.
OPTION (1) Tax calculation obeys linked tax flag yes/no (2) Calculated amount link to DEPT/PLU yes/no (3) Not used (4) Management Control(X-LOCK) yes/no
-75- DPRTLR.01.01
%DISCOUNT %ADD-ON -%ENTER PERCENT
%DISCOUNT %ADD-ON -%ENTER UPPER LIMIT
%DISCOUNT %ADD-ON -%ENTER OPT FLAG
%DISCOUNT %ADD-ON -%ENTER LINKED TAX
A [1] [2] [3] [4]
00 no no --- no01 no no --- yes02 no no --- no03 no no --- yes04 no ye
s--- no
05 no yes
--- yes
06 no yes
--- no
07 no yes
--- yes
08 yes
no --- no
09 yes
no --- yes
10 ye no --- no
Link TAX flag: % calculation affect to TAXn
● To exit operation, press [TOTAL] key.
19. AMOUNT DISCOUNT KEY
Select "AMOUNT DISCOUNT" in P1 mode main menu and press [CASH] key. ● Select preset item.
Enter discount amount (MAX. 8 digits) and press [CASH] key.
Enter HALO table number and press [CASH] key.
Enter option flag value. After entering option flag value, return to item selecting mode.
-76- DPRTLR.01.01
AMOUNT DISCOUNT -1ENTER DISC.
AMOUNT DISCOUNT -1ENTER HALO TABLE
AMOUNT DISCOUNT -1ENTER OPT FLAG
ATAX4TAX3TAX2TAX100-----------01--------○02-----○---03-----○○04--○------05--○---○06--○○---07--○○○08○---------09○------○10○---○---11○---○○12○○------13○○---○14○○○---15○○○○
Non TAXTAX1TAX2
TAX3
TAX4
OPTION A: Linked TAX flag *1 B: (1) Amount affects to taxable yes/no (2) Calculated amount link to DEPT/PLU yes/no (3) Not use (4) Management Control(X-LOCK) yes/no
A B
*1: This flag is valid in subtotal amount discount.
● To exit operation, press [TOTAL] key.
19.5 SUBTOTAL PERCENT PLUS (ST%+1 – ST%+4)
Select "SUBTOTAL % PLUS" in P1 mode main menu and press [CASH] key.
● If you select "SUBTOTAL % PLUS PROGRAM", press [CASH] key.
Enter percentage rate with decimal point. Note: Rate is 2digits(integer) + 3digits(decimal). In case of 10%, input only integer 10. In case of 10.005%, input 10 and 005 after decimal point.
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
-77- DPRTLR.01.01
ATAX4TAX3TAX2TAX100-----------01--------○02-----○---03-----○○04--○------05--○---○06--○○---07--○○○08○---------09○------○10○---○---11○---○○12○○------13○○---○14○○○---15○○○○
Non TAXTAX1TAX2
TAX3
TAX4
B [1] [2] [3]
[4]
00 no no --- no01 no no --- ye
s02 no no --- no03 no no --- ye
s04 no ye
s--- no
05 no yes
--- yes
06 no yes
--- no
07 no yes
--- yes
08 yes
no --- no
SUBTOTAL % PLUS
ENT %+ RATE nn.nnn
20. CLOSING MEDIA KEY
Select "CLOSING MEDIA" in P1 mode main menu and press [CASH] key. ● Select preset item.
Enter HALO table number and press [CASH] key.
Enter option flag value and press [CASH] key.
OPTION A: (1) Prohibit Over Tendering Operation yes/no (2) Allow Tendering Operation yes/no (3) Compulsory Tendering yes/no (4) Open the Cash Drawer yes/no
B: (1) Not used (2) Allow refund closing operation yes/no (3) Not use (4) Management Control(X-LOCK) yes/no *This flag not affect to CASH media
A B
● To exit operation, press [TOTAL] key.
-78- DPRTLR.01.01
CLOSING MEDIA CASHENTER HALO TABLE No.
CLOSING MEDIA CASHENTER OPT FLAG VALUE
A [1] [2] [3] [4]
00 no no no no01 no no no ye
s02 no no ye
sno
03 no no yes
yes
04 no yes
no no
05 no yes
no yes
06 no yes
yes
no
07 no yes
yes
yes
08 yes
no no no
B [1] [2] [3]
[4]
00 no no --- no01 no no --- ye
s02 no no --- no03 no no --- ye
s04 no ye
s--- no
05 no yes
--- yes
06 no yes
--- no
07 no yes
--- yes
08 yes
no --- no
21. OTHER FUNCTION KEY
Select "OTHER FUNCTION KEY" in P1 mode main menu and press [CASH] key. Select preset item.
Enter HALO table number and press [CASH] key.
Note: HALO table programming item is indicated only when R/A or P/O selected.
Enter option flag value and press [CASH] key.
● To exit operation, press [TOTAL] key.
NOTE: This operation preset allow function keys. R/A1, R/A2, R/A3, P/O1, P/O2, P/O3, ERROR CORRECTION, VOID, NOSALES, EXCHANGE, HOLD, RETURN, PROMO
-79- DPRTLR.01.01
OTHER FUNCTION KEYR/A 1ENTER HALO TABLE
OTHER FUNCTION KEYR/A 1ENTER OPT FLAG
Flag Value[1][2]00---no01---yes[1] not use[2] Management Control(X-LOCK) yes/no
22. FOREIGN CURRENCY
Select "FOREIGN CURRENCY" in P1 mode main menu and press [CASH] key.
Enter foreign currency number (1-5) and press [CASH] key.
Enter foreign currency rate (without decimal point) and press [CASH] key.
Enter foreign currency decimal point position and press [CASH] key.
Note: Rate is 3digits(integer) + 6digits(decimal).
● To exit operation, press [TOTAL] key.
Foreign currency rate calculate as follow, Your country currency multiple FC rates. If used EURO period function, then foreign currency 1 has special meaning. FC1 rate need entry 1EURO = local currency. In case EURO 1st period, Country currency division FC1 rate. In case EURO 2nd and 3rd period, EURO currency multiple FC1 rate.
23. EURO PERIOD PRESET
Select "EURO PERIOD PRESET" in P1 mode main menu and press [CASH] key. ● If you select "PRESET EURO PERIOD", press [CASH] key. Enter new EURO period number.
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
● To exit operation, press [TOTAL] key.
Note: If sales data is not ZERO, changing EURO period is prohibited. If EURO period change 1st period to 2nd, then department and PLU preset amount automatically change EURO currency (follow FC1 rate). And decimal point is change to FC1 decimal. If EURO period change 2nd period to 1st, then department and PLU preset amount change to local currency automatically. (follow FC1 rate) And decimal point is changed to FC1 decimal. If EURO 3rd period, then print and display EURO currency mark.
-80- DPRTLR.01.01
FOREIGN CURRENCY FC1 ENTER FC FLAG
FOREIGN CURRENCY ENTER FC
FOREIGN CURRENCY FC1 FC RATE
24. REPORT CHAIN
Select "CHAIN REPORT PROG." in P1 mode main menu and press [CASH] key. Select report level from X1 to Z2. Select chain report items. When finished, SCROLL to top and select “ END OF SELECTION”.
Note: If you want to cancel the REPORT CHAIN, you must select the "END OF SELECTION" key at first. You can not program Z1 REPORT CHAIN with FULL DEPT SALES and ALL CASHIERS SALES.
● To exit operation, press [TOTAL] key.
25. MACRO KEY
Select "MACRO KEY FUNCTION" in P1 mode main menu and press [CASH] key. ● If you select "PRESET MACRO KEY", press [CASH] key.
Enter MACRO key number. (1-15)
Select MACRO key position or cancel MACRO and press [CASH] key. Recording MACRO key.
When ready to end recording MACRO key stokes press [CLEAR] key.
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
Note: If you have relocated KEYBOARD LAYOUT, you must program the MACRO KEY all over again.
-81- DPRTLR.01.01
MACRO KEY FUNCTION ENTER MACRO
26. PRINTING ITEM for CHECK PRINT
Select "CHECK PRINT ITEM" in P1 mode main menu and press [CASH] key. ● If you select "PRESET CHECK PRINT", press [CASH] key. Select printing item.
Preset character. (SEE ALPHA KEY CODE TABLE)
Programmable printing item
PRINTING ITEM FORMATSUBTOTAL with SYMBOL 1SUBTOTAL with SYMBOL 2SHOP NAMEMESSAGE 1MESSAGE 2MESSAGE 3SYMBOL 3SYMBOL 4
Max.10 charactersMax.10 charactersMax.40 charactersMax.30 charactersMax.30 charactersMax.30 charactersMax. 1 characterMax. 1 character
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
● To exit operation, press [TOTAL] key.
27. CHECK FORMAT TABLE
Select "CHECK PRINT FORMAT" in P1 mode main menu and press [CASH] key.● If you select "PRESET CHECK FORMAT", press [CASH] key.
Enter check print format table number and press [CASH] key.
Note: The CHECK FORMAT TABLE is FIVE.
Enter definition number (1-10) and press [CASH] key.
Note: ONE CHECK FORMAT TABLE has TEN Definitions for PRINTING ITEM.
-82- DPRTLR.01.01
CHECK PRINT ITEM SUBTOTAL SYMBOL1
CHECK PRINT FORMAT ENTER TABLE No. 1-
CHECK PRINT FORMAT ENTER DEFINE
Enter print format data and press [CASH] key.
PRINT ITEM NUMBERITEM No. PRINTING ITEM ABOUT FORMAT
0123456789
1011121314
NON PRINTSUBTOTAL with SYMBOL 1SUBTOTAL with SYMBOL 2DAY of DATEMONTH of DATEYEAR of DATEMACHINE#TIMERECEIPT#SHOP NAMEMESSAGE 1MESSAGE 2MESSAGE 3SYMBOL 3SYMBOL 4
Programmable SYMBOL 1 (Max.10 Characters)Programmable SYMBOL 2 (Max.10 Characters)Fixed Format "DD"Fixed Format "MM"Fixed Format "YY"Fixed Format "#99"Fixed Format "HH:MM"Fixed Format "999999"Programmable (Max.40 Characters)Programmable (Max.30 Characters)Programmable (Max.30 Characters)Programmable (Max.30 Characters)Programmable (1 Character)Programmable (1 Character)
Print formatNo.
A B C D
1 00-14
00-19
00-51
00-01
2::
10
A : PRINTING ITEM# (00 - 14) See PRINTING ITEM NUMBER B : Y POSITION (00 - 19) See SAMPLE SCALE PRINTING C : X POSITION (00 - 51) See SAMPLE SCALE PRINTING D : ATTRIBUTE (00 = NORMAL CHARACTER, 01 = DOUBLE WIDW CHARACTER)
● To exit operation, press [TOTAL] key.
● If you select "PRESET REPORT ", press [CASH] key for a program scan. ● If you select "SAMPLE SCALE PRINT", press [CASH] key.
The scale of printing position for check format is printed.
X
0123456789012345678901234567890123456789012345678901 2 2 2 2 2
-83- DPRTLR.01.01
CHECK PRINT FORMAT ENTER PRINT
Y
| | | | | 19 19 19 19 19
-84- DPRTLR.01.01
28. KITCHEN PRINTER PROGRAMMING
Select "KITCHEN PRINTER " in P1 mode main menu and press [CASH] key.
● If you select "CORRECTION, CREATE ", press [CASH] key.
Enter kitchen printer number (1-4) and press [CASH] key.
Current name is indicated 2nd line. Press [VOID] key to erase last character.
Enter the Kitchen Printer name (MAX 16characters) and press [CASH] key.
Enter backup kitchen printer number (0-4) and press [CASH] key. 0 = receipt(ticket print)
Enter kitchen printer option flag value and press [CASH] key.
OPTION A : Line feed counter between a item print and next item print on the receipt(ticket print)B : [1] Partial cut between a item print and next item print on the receipt(ticket print) [2] Kitchen printer without auto cutter
A B
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
● To exit operation, press [TOTAL] key.
-85- DPRTLR.01.01
KITCHEN PRINTER
KITCHEN PRINTER No.
KITCHEN PRINTER KP 01 ENTER NAME 0
KITCHEN PRINTER KP 01 ENTER BACKUP No. 0
KITCHEN PRINTER KP 01 ENTER OPT FLAG VALUE
Flag Value [1] [2]
00 no no01 no ye
s02 ye
sno
29. MASTER/SLAVE TABLE (IRC)
When using I.R.C function, following item must be programmed correctly.
1) Machine ID programming
Turn the mode lock to the P1 position.
Then select Machine No. programming and press [CASH] key.
Input machine number(1-99) and press [CASH] key.Each machine must be programmed different number. Don’t set same number.Maximum 9 machines (1 Master and 8 Slave) can be programmed in one system.
2) Master Slave Table programming.
Turn the mode lock to the P1 position. Then select MASTER SLAVE PROG.
Enter [CASH] key.
Input machine ID number and press [CASH] key.
Select machine type SLAVE or MASTER and press [CASH] key. The machine type must be programmed to not only itself but also all ECR that is connected in
the network. Therefore all ECR must have same table data.
-86- DPRTLR.01.01
SELECT PROGRAM ITEM PLU STOCK PROGRAM SERVER ID
MACHINE No.PROGRAM ENTER MACHINE No.
SELECT PROGRAM ITEM CHECK PRINT ITEM CHECK PRINT
MASTER SLAVE PROG.
ENTER MACHINE No.
SELECT MACHINE TYPESTAND ALONESLAVE ECRMASTER ECR
30. TIME PROGRAMMING
Select "TIME PROGRAMMING" in P1 mode main menu and press [CASH] key. Display now time and you can enter new TIME.
Note: Time enter by 24 hour. If enter 6 digits, HH,MM,SS If enter 4 digits, HH,MM To exit operation, press [TOTAL] key.
31. DATE PROGRAMMING
Select "DATE PROGRAMMING" in P1 mode main menu and press [CASH] key. Display now date and you can enter new DATE.
Note: To exit operation, press [TOTAL] key.
32. TARE WEIGHT PRESET Select "TARE WEIGHT PRESET" by P1 mode main menu.
Enter TARE weight value and press [CASH] key, then automatically turns next level tareweight entry display. Maximum 8 kinds tare weight can be programmed.
To terminate programming, press [TOTAL] key.
33. START BILL No. PROGRAMMING Select "START BILL No. PROG." by P1 mode main menu.
Enter new consecutive No. and press [CASH] key.
-87- DPRTLR.01.01
TARE WEIGHT PRESET
ENTER TARE
START BILL No.PROG.
ENTER START
34. MODEM PRESET Select "MODEM PRESET" by P1 mode main menu.
● If you select "MODEM FLAG PRESET", press [CASH] key.
Enter modem option flag value and press [CASH] key.
OPTION (1)Not used(2)Not used(3)Use password at communication yes/no(4)Use modem at PC communication yes/no
● If you select "MODEM PASSWORD", press [CASH] key.
Enter modem communication password and press [CASH] key.
● If you select "DIALING No. PRESET", press [CASH] key.
Enter dialing number and push [CASH] key. Note: Dialing number preset 8 kinds.
● If you select "PRESET REPORT ", press [CASH] key for a program scan.
● If you select "DIALING PRESET No. ", press [CASH] key for a program scan. Dialing to Preset No.
● If you select "DIALING INPUT No. ", press [CASH] key for a program scan. Dialing input No.
● To exit operation, press [TOTAL] key.
If you want more information about modem connection, please refer to the modem control chapter in the interface manual.
-88- DPRTLR.01.01
MODEM PRESET
ENTER OPT FLAG VALUE
MODEM PRESET
ENTER PASSWORD 0
MODEM PRESET
ENTER DIALING No. 1
Flag Value [1]
[2]
[3] [4]
00 --- --- no no01 --- --- no ye
s02 --- --- ye
sno
35. ALL PRESET REPORT
Select "P1 PRESET REPORT" in P1 mode main menu and press [CASH] key. ISSUE the Preset Report
36. PROGRAM VERSION DISPLAY
OPERATION SEQUENCE
Select "VERSION No. DISPLAY" in P1 mode main menu and press [CASH] key.
37. TRAINING MODE PASSWORD
Select "TRAINING MODE" in P1 mode main menu and press [CASH] key.
Enter training mode password number( Max 4 digits) and press [CASH] key.
Note: Under the training mode, all transaction amounts will not affect to any reports.
-89- DPRTLR.01.01
TRAINING MODE
ENTER PASSWORD 1234
ROM Version No. x.xx
III. S E R I A L I N T E R F A C E & C O N N E C T I O N S
1. INTER-REGISTER(Master-Slave) COMMUNICATION (IRC)
(1) INTERFACE SPECIFICATION for Inter-Register Communication
* Hardware Interface : RS-485 (PORT-#2)
* Link Control : Multi point (Max.32 stations)
(2) INTRODUCTION of Inter-Register Communication
First you must program MACHINE No.(Refer to Page 50) for all ECRs. Next you must program MASTER/SLAVE TABLE (Refer to Page 66) at the Master ECR.
-90- DPRTLR.01.01
Port#3 and #4 are option
Cautions: Port #2 is fixed for I.R.C. by hardware setting. Not to plug any other device into port #2. If you want to use it as RS-232C serial port, you must modify the main board following another instructions. Please don’t connect any devices to the port #2 without main board modifications.
(3) PROGRAMMING with Inter-Register Communication
If you program following items at the Master ECR, the Master ECR will copy the programmed data to all Slave ECRs. If the Master ECR can not communicate to a Slave ECR, when you pressed Q/F key for programming No. input, your input will be of no effect. After the Master ECR has copied to all Slave ECRs, if it is O.K. then the receipt will show '*** M/S COPIED ***', if it is N.G. then the receipt will show '* M/S COPY ERROR *'.
PROGRAMMING AT 'P2' POSITION
CHANGING TRANSACTION DESCRIPTOR
PROGRAMMING AT 'P1' POSITION
DEPARTMENT PROGRAMMING PLU PROGRAMMING
PLU STOCK LINK PROGRAMMINGSET-MENU PROGRAMMINGCOOKING INSTRUCTION PROGRAMMINGSTOCK FILE CORRECT
STOCK FILE PROGRAMMING SERVER-ID NUMBER and NAME
PASSWORD PROGRAMMING TAX RATE (TAX1 – TAX4) HIGH/LOW AMOUNT LOCK OUT TABLE GROUP NAME for REPORT CASHIER NAME & LINK TO DRAWER PERCENTAGE DISCOUNT/ADD-ON KEY AMOUNT DISCOUNT KEY CLOSING MEDIA KEY OTHER FUNCTION KEY FOREIGN CURRENCY
EURO PERIOD REPORT CHAIN
KITCHEN PRINTER MASTER/SLAVE TABLE
-91- DPRTLR.01.01
2. SCANNER CONNECTION
YOU MAY CONNECT A BARCODE SCANNER TO ONE OF RS-232C PORTS (PORT-#1,#3,#4).
(1) INTERFACE SPECIFICATION for Barcode Scanner
* Hardware Interface : Asynchronous Serial (RS-232C level)
* Baud Rate : 9600 bps
* Character Format : Start bit + ASCII code + Parity bit + Stop bit (1 bit) (7 bits) (1 bit) (1 bit)
* Parity : Even Parity
* Text Format
Bar Code DataCR orLF orCR+LF
without any communication protocol
(2) CONNECTION for Metrologic MS700 Projection Scanner (with PORT-#1,#3,#4)
ECR side MS700 side DSUB9 DSUB9 Received Data (RXD) 2 2 (TXD) Transmitted Data (TXD) 3 Signal Ground (SG) 5 5 (SG) Data Terminal Ready (DTR) 4 Data Set Ready (DSR) 6 Clear To Send (CTS) 8 (+5v) 9
In case of using port #1, pin#4,6 and 8 must be connected each other.
ECR side MS700 side DSUB9 DSUB25 Received Data (RXD) 2 2 (TXD) Transmitted Data (TXD) 3 Signal Ground (SG) 5 7 (SG) Data Terminal Ready (DTR) 4 Data Set Ready (DSR) 6 Clear To Send (CTS) 8 (+5v) 9
In case of using port #1, pin#4,6 and 8 must be connected each other.
-92- DPRTLR.01.01
Cautions: Port #2 is fixed for I.R.C. by hardware setting. Not to plug any other device into port #2. If you want to use it as RS-232C serial port, you must modify the main board following another instructions. Please don’t connect any devices to the port #2 without main board modifications.
(3) CONNECTION for NIPPONDENSO BHS 6060 Hand Scanner (with PORT-#1,#3,#4)
ECR side BHS 6060 side DSUB9 DSUB9 (Pin No.D) Received Data (RXD) 2 3 (TXD) Transmitted Data (TXD) 3 2 (RXD) Data Terminal Ready (DTR) 4 4 (CTS) Data Set Ready (DSR) 6 Clear To Send (CTS) 8 5 (RTS) Signal Ground (SG) 5 7 (SG) (+5v) 9 9 (+5V)
In case of using port #1, pin#4 and 6 must be connected.
(4) CONNECTION for SCANTECH POLARIS P-7010 (with PORT-#1,#3,#4)
ECR side SCANTECH POLARIS P-7010 DSUB9 RJ-48 Received Data (RXD) 2 2 (TXD) Transmitted Data (TXD) 3 Signal Ground (SG) 5 6 (GND) (+5v) 9 7 (+5V) Data Terminal Ready (DTR) 4 Data Set Ready (DSR) 6 Clear To Send (CTS) 8
In case of using port #1, pin#4,6 and 8 must be connected each other.
-93- DPRTLR.01.01
(5) Metrologic MS700 Scanner
Dip Switch Settings
ON o o o o o o o o o o oOFF o o o o o o o o o o o o o o o o
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3DS3 DS2 DS1 DS
4
DS3 : Code Type Enable/Disable -1 ON : CODE 39 ENABLED -2 ON : CODE 93 ENABLED -3 ON : CODE 128 ENABLED -4 ON : CODABAR ENABLED -5 OFF : INTERLEAVED 2 OF 5 DISABLED -6 OFF -7 ON : ENABLED MECCA -8 ON : UPC/EAN ENABLED
DS2 : Communication Parameters -1 OFF : DO NOT TRANSMIT UPC-A CHECK DIGIT -2 OFF : DO NOT TRANSMIT UPC-E CHECK DIGIT -3 OFF : NORMAL BEEP TONE -4 OFF -5 OFF : NO PREFIX IDENTIFIERS -6 OFF : 9600 bps -7 OFF -8 ON
DS1 : Communication Parameters -1 ON : NO LF TRXD -2 OFF : CR TRXD -3 OFF : DO NOT EXPAND UPC-E -4 OFF : EVEN PARITY -5 ON -6 OFF : RTS/CTS DISABLED -7 OFF : NO SUFFIXED IDENTIFIERS -8 ON : RS232C PROTOCOL
DS4 : Timeout Features -1 ON : 2 SECOND BETWEEN TWO OF THE SAME SYMBOL -2 OFF : 10 MINUTE AFTER A SCAN, THE MOTOR AND LASER ARE SHUT OFF -3 OFF
(6) SCANNING OPERATIONS
You can scan the Bar Code at the PLU number entries, PLU PROGRAMMING(at 'P1' position), FULL PLU SALES REPORT(at 'X' or 'Z' position), FULL PLU STOCK REPORT(at 'X' or 'Z' position), PLU SALE ENTRIES(at 'R' position). In case your register is not at the PLU number entries, the error buzzer will ring and the display will show the PLU number.
-94- DPRTLR.01.01
(7) 2X TYPE of BAR CODE
The 2X type of bar code can be read by the scanner. The 2X type of bar code is the following EAN/JAN(13 digits bar code) for the weight of goods or the unit price of goods. You can select The 2X type of bar code by the option flag No.21.
2X BAR CODE TYPE for WeightTYPENo.
EAN/JAN (13digits)X = 8 or 9
PLU No.(digit) Weight(digit)WW.WWW Kg
1 2XCCCCAWWWWWB
CCCC (4) WWWWW (5)
2 2XCCCCAWWWWWB
2XCCCC (4) WWWWW (5)
3 2XCCCCCWWWWWB
CCCCC (4) WWWWW (5)
4 2XDCCCCWWWWWB
CCCC (4) WWWWW (5)
5 2XDDCCCWWWWWB
CCC (4) WWWWW (5)
A,B : Check Digit ( A is neglected) D,DD : Scale ID (This is neglected)
2X BAR CODE TYPE for Unit PriceTYPENo.
EAN/JAN (13digits)X = 0 - 9
PLU No.(digit) Unit Price (digit)
6 2XCCCCCAPPPPB 2XCCCCC (7) PPPP (4)
7 2XCCCCAPPPPPB 2XCCCC (6) PPPPP (5)
8 2XCCCCCPPPPPB 2XCCCCC (7) PPPPP (5)
9 2XCCCCPPPPPPB 2XCCCC (6) PPPPPP (6)
A,B : Check Digit ( A is neglected)
(8) 02 TYPE of BAR CODE
The 02 type of bar code can be read by the scanner. The 02 type of bar code is the following EAN/JAN(13 digits bar code) for the unit price of goods. You can select The 02 type of bar code by the option flag No.41.
02 BAR CODE TYPETYPE EAN/JAN (13digits) PLU No.(digit) Unit Price (digit)
1 02CCCCCAPPPPB 2CCCCC (6) PPPP (4)
2 02CCCCAPPPPPB 2CCCC (5) PPPPP (5)
3 02CCCCCPPPPPB 2CCCCC (6) PPPPP (5)
A,B : Check Digit ( A is neglected)
-95- DPRTLR.01.01
3. SCALE CONNECTION
THE SCALE (PD-1 by CAS) CAN BE CONNECTED TO THE ECR. YOU MAY CONNECT THE SCALE TO ONE OF RS-232C SERIAL PORTS(PORT-#1,#3,#4).
(1) INTERFACE SPECIFICATION
* Hardware Interface : Asynchronous Serial (RS-232C level)
* Baud Rate : 9600 bps
* Character Format : Start bit + ASCII code + Parity bit + Stop bit (1 bit) (7 bits) (1 bit) (1 bit)
* Parity : Even Parity
(2) CONNECTION
ECR side SCALE side DSUB9 DSUB25 Received Data (RXD) 2 5 (TXD) Transmitted Data (TXD) 3 6 (RXD) Signal Ground (SG) 5 23 (SG) Data Terminal Ready (DTR) 4 Data Set Ready (DSR) 6 Clear To Send (CTS) 8
In case of using port #1, pin#4,6 and 8 must be connected each other.
-96- DPRTLR.01.01
Cautions: Port #2 is fixed for I.R.C. by hardware setting. Not to plug any other device into port #2. If you want to use it as RS-232C serial port, you must modify the main board following another instructions. Please don’t connect any devices to the port #2 without main board modifications.
(3) PROTOCOL
ECR SCALE COMMAND
ECR SCALE RESPONSE
COMMAND : 'W'(57H)
RESPONSE : WEIGHT1 byte5 bytes1 byte
STX WEIGHT CR
02H Kg = XX.XXX 0Dh
( The decimal pint character is ignored.)
RESPONSE : ERROR1 byte1 byte1 byte1 byte
STX '?' STATUS CR
02H 3FH 0DH
STATUS : Bit4 = 1 : CENTER OF ZERO Bit2 = 1 : UNDER ZERO Bit1 = 1 : OUT OF RANGE Bit0 = 1 : MOTION
-97- DPRTLR.01.01
4. EXTERNAL PRINTER CONNECTION
THE SLIP PRINTER (TM-290II or TM-U295 BY SEIKO EPSON), TERMINAL PRINTER(EPSON TM300 SERIES) CAN BE CONNECTED TO THE ECR. YOU MAY CONNECT A PRINTER TO ONE OF RS-232C PORTS(PORT-#1,#3,#4).The Kitchen printer port is fixed to port #4
(1) INTERFACE SPECIFICATION
* Hardware Interface : Asynchronous Serial (RS-232C level) * Baud Rate : 9600 bps * Character Format : Start bit + ASCII code + Stop bit (1 bit) (8 bits) (1 bit)
(2) CONNECTION
PORT#1,#3,#4 ECR side TM-SERIES DSUB9 DSUB25 1 (FG) Received Data (RXD) 2 2 (TXD) Transmitted Data (TXD) 3 3 (RXD) Data Terminal Ready (DTR) 4 6 (DSR) Signal Ground (SG) 5 7 (SG) Data Set Ready (DSR) 6 20 (DTR) Clear To Send (CTS) 8 Request To Send (RTS) 7 (+5v) 9
(3) DIP SWITCH SETTINGS
S W 1ONOFF o o o o o o o o o o
- 1 OFF : Prints "?" for data receive error- 2 OFF : Data buffer 512 bytes- 3 OFF : DTR/DSR control- 4 OFF : 8-bit word length- 5 OFF : No parity- 6 OFF : (Odd parity)- 7 OFF : Transmission speed selection- 8 OFF 9600 bps- 9 OFF : Unused-10 OFF : Unused
1 2 3 4 5 6 7 8 9 10
-98- DPRTLR.01.01
Cautions: Port #2 is fixed for I.R.C. by hardware setting. Not to plug any other device into port #2. If you want to use it as RS-232C serial port, you must modify the main board following another instructions. Please don’t connect any devices to the port #2 without main board modifications.
5. EXTERNAL DISPLAY CONNECTION
THE EXTERNAL CUSTOMER DISPLAY (DSP-800) CAN BE CONNECTED TO THE ECR. YOU MAY CONNECT THE DISPLAY TO ONE OF RS-232C SERIAL PORTS(PORT-#1,#3).
(1) INTERFACE SPECIFICATION
* Hardware Interface : Asynchronous Serial (RS-232C level)
* Baud Rate : 9600 bps
* Character Format : Start bit + ASCII code + Stop bit (1 bit) (8 bits) (1 bit)
(2) CONNECTION
PORT #1 ECR side DSP-800 side CN6 DSUB9 1 (FG) Transmitted Data (TXD) 3 3 (RXD) Signal Ground (SG) 5 5 (SG) Clear To Send (CTS) 8 6 (DTR) Data Set Ready (DSR) 6
PORT #3,#4 ECR side DSP-800 side CN6 DSUB9 1 (FG) Transmitted Data (TXD) 3 3 (RXD) Signal Ground (SG) 5 5 (SG) Clear To Send (CTS) 8 6 (DTR)
(3) DIP SWITCH SETTINGS
S W 1ONOFF o o o o o o o o
- 1 OFF : 9600 bps- 2 OFF : Command type selection- 3 OFF : Command type selection- 4 OFF : Command type selection- 5 OFF : Language selection- 6 OFF : Language selection- 7 OFF : Language selection- 8 OFF : Language selection
1 2 3 4 5 6 7 8
-99- DPRTLR.01.01
Cautions: Port #2 is fixed for I.R.C. by hardware setting. Not to plug any other device into port #2. If you want to use it as RS-232C serial port, you must modify the main board following another instructions. Please don’t connect any devices to the port #2 without main board modifications.
(4) CONNECTION OF THE EXTERNAL DISPLAY AND THE SCANNER A BARCODE SCANNER AND THE EXTERNAL DISPLAY CAN CONNECT TO A SERIAL PORT AT THE SAME TIME.
EXAMPLE)
PORT #1 ECR side DSP-800 side CN6 DSUB9 Transmitted Data (TXD) 3 3 (RXD) Clear To Send (CTS) 8 6 (DTR) Data Set Ready (DSR) 6 Signal Ground (SG) 5 5 (SG) SCANNER side DSUB9 (*) (SG) Received Data (RXD) 2 (TXD) (+5v) 9 (+5V)
IN THE CASE OF ABOVE PORT-A CONNECTION, THE SCANNER WORKS WHEN THE EXTERNAL DISPLAY TURN ON.
PORT #3,#4 ECR side DSP-800 side CN6 DSUB9 Transmitted Data (TXD) 3 3 (RXD) Clear To Send (CTS) 8 6 (DTR) Signal Ground (SG) 5 5 (SG) SCANNER side DSUB9 (*) (SG) Received Data (RXD) 2 (TXD) (+5v) 9 (+5V)
(*) REFER TO THE SCANNER PIN ASSIGNMENT OF 2.SCANNER CONNECTION
-100- DPRTLR.01.01