Manual solvent ultrasonic

degreaser

2S 4/2-P-F

Low energy consumption

Minimal amount of space

Extremely manageable

Non-flammable new generation solvents

Precision cleaning

Stainless steel tanks construction, thickness 20/10 mm, TIG welding, pickled;

Sloping base on tanks for ease of draining;

Discharge valves in chromed brass;

Electric heating in boil sump;

2 level control systems;

Temperature control in ultrasonic tank with PT 100 probe;

Insulation on all heated zones of the machine;

Refrigerated cooling system with air exchanger;

Condensing coils;

Water separator;

Piezoelectric ultrasonic group (100/200 W, 38 kHz), composed by an integrated digital generator and a transducer on the bottom of the second tank;

Internal bund tray;

Manual sliding process chamber cover, handle provided;

Wheels and handles for ease of movement;

Electrical control panel with operator interface (Schneider);

Constructed following European rules CE;

Electrical supply: 230V 1Ph + N 50Hz;

Tanks dimensions: 150 x 150 x 150 h. mm about;

Overall dimensions: 622 x 870 x 1.050 h. mm about.

Power and manageability

DESCRIPTION

TECHNICAL SPECIFICATIONS

The ultrasonic degreasing machine

2S 4/2-P-F packs all the features that

are the most innovative for the

degreasing of mechanical parts by

immersion in new generation of

environmentally-friendly fluorinated

solvents (HFE, HFC… ).

This tiny, powerful machine is

composed by a stainless steel

supporting structure which includes

two sections: the first for the pre-

cleaning in boiling solvents or

solvent vapours; the second for the

ultrasonic solvent cleaning.

Small, handy, wheels and handles

provided and extremely efficient in

the degreasing of small parts, it has

all the features you would expect on

a much larger machine.

MEG srl

Via Rometta 13G

35018 S. Martino di Lupari (PD)

ITALY

Tel: +39 049 9461165

Fax: +39 049 9461133

e-mail: info@meg.it

web: www.meg.it