Manual Systems

7/21/2019 Manual Systems

http://slidepdf.com/reader/full/manual-systems 1/4

w w w . p u l l t a r p s . c o mw w w . p u l l t a r p s . c o m

1 8 0 0 3 6 8 3 0 7 51 - 8 0 0 - 3 6 8 - 3 0 7 5

S i m p l y t h e B e s tS i m p l y t h e B e s t !

End CapsEnd CapsThe berglass reinforcedThe fiberglass reinforcednylon end caps providenylon end caps providefriction free operation even infriction free operation even insubzero temperatures. Lastssubzero temperatures. Lastslonger than bearings becauselonger than bearings becausethey’re not affected by saltthey’re not affected by salt,moisture or grit.moisture or grit.

Bungee CordBungee CordThe orange and blackThe orange and blackpolypropylene truckers’ ropepolypropylene truckers’ ropehas a bungee cord with a ringhas a bungee cord with a ringattached so it doesn’t need toattached so it doesn’t need tobe tied off.be tied off.

SpringThe Spring i sThe Spring i splated to resistplated to resistcorrosion andcorrosion andhas a lifetimehas a lifetimeguaranteeguarantee.

Side FlapsVinyl Side Flaps areVinyl Side Flaps areavailable for all tarpsavailable for all tarps.

Grommets

Come standard

on all tarps.

Braided LoopBraided Loopgoes through thegoes through thewebbing loop towebbing loop toprevent hanging upprevent hanging upwhen pulling overwhen pulling overthe tailgate.the tailgate.

GalvanizedGalvanized

Roller TubeRoller TubeEasily remove orEasily remove orinstall any tarp. Tarpinstall any tarp. Tarpslides in and out ofslides in and out ofthe groove on thethe groove on theroller tube.roller tube.

New TeardropNew Teardrop

PullbarPullbarTarp slides in grooveTarp slides in grooveand wraps around ourand wraps around ournew pullbar design.new pullbar design.

Standard Arm TubingStandard Arm TubingArms made of common fence pipe Arms made of common fence pipeor aluminum tubing. Allows foror aluminum tubing. Allows forinexpensive repairs in the eldinexpensive repairs in the field

Urethane BushingsUrethane BushingsProvide smoothProvide smoothoperation absorboperation, absorbshock and are notshock and are notaffected by saltaffected by salt,moisture or grit.moisture, or grit.

Mounting PlateSteel Mounting Plateis bolted to aluminumbodies and can bewelded or bolted tosteel bodies.

Rope Storage HooksRope Storage Hooksare provided for frontare provided for frontand rear rope storage.and rear rope storage.

Zinc plated steel orZinc plated steel oraluminum.aluminum.

Retro t Kit ElbowsRetrofi t Kit ElbowsUpgrade your existing PulltarpsUpgrade your existing Pulltarps

System without having to removeSystem without having to removethe tarpthe tarp

UrethaneUrethaneBumpersBumpersAlign tarp and Align tarp andprotect theprotect thebodybody



Standard Pulltarps® Systems can beeasily ordered or converted to Manua

Arm Kits. The Manual Arms mount to theside of the body and lift your tarp overthe load. Economical and easy to useManual Arms are great for heaped loadslike trash, shrubbery and demolition. Almoving parts guaranteed* for as long asyou own it.

Teardrop TechnologyThe tarp Hem Tube slides into theUniversal Teardrop Pullbar in order to

eliminate bunching and stress on thestitching. The Urethane bumpers arethen fastened to the teardrop pullbar tokeep the tarp centered and reduce noise

Ma n ua l A r m K i t s

Manual Arm KitWhen a Manual Arm Kit is purchased as acomplete kit with housing and tarp, the tarp slidesinto a groove in the pullbar tocreate less stress on thetarp and reduce wear and tear.

Common Kit Features: • Available in Steel or Aluminum Arms

• No tarp modification necessary • Can deploy tarps up to 22’

Description Part Number 22’ Steel Manual Arm Kit Straight Arms Part # 113-2214

22’ Steel Manual Arm Kit Bent Arms Part # 113-2215

22’ Aluminum Manual Arm Kit Straight Arms Part # 113-2224

22’ Aluminum Manual Arm Kit Bent Arms Part # 113-2225

Straight Arms

Bent Arms

Standard Pulltarps® Systems can beeasily ordered or converted to Manua

Arm Kits. The Manual Arms mount to theside of the body and lift your tarp overthe load. Economical and easy to useManual Arms are great for heaped loadslike trash, shrubbery and demolition. Almoving parts guaranteed* for as long asyou own it.

eardrop TechnologyThe tarp Hem Tube slides into the

niversal Teardrop Pullbar in order to

eliminate bunching and stress on thestitching. The Urethane bumpers arethen astened to the teardrop pullbar toeep the tarp centered and reduce noise

anual Arm KitWhen a Manual Arm Kit is purchased as acomplete kit with housing and tarp, the tarp slidesn o a roove n e pu arcreate ess stre etarp and reduc wear an tear.

Common Kit Features: • Available in teel or Aluminum Arms

• No tarp modi cation necessary • an deploy tarps up to 2

Descri tion ar um er 22’ Steel Manual Arm Kit Straight Arms Part # 113-2214

22’ Steel Manual Arm Kit Bent Arms Part # 113-2215

22’ Aluminum Manual Arm Kit Straight Arms Part # 113-2224

22’ Aluminum Manual Arm Kit Bent Arms Part # 113-2225

Straight Arms

Bent Arms



Stock Housing Widths 80” , 84” , 87” , 89” , 93” , 96” , & 100”

Ma n u a l A r m K i t s Wo r k w i t h A l l Pu l l t a r p s H o u s i n g s

Steel Protector Pulltarps® SystemDesigned to be mounted against the cab shieldso material will roll off into box. Galvanized endplates and housing protect against corrosion.

9” Open Pulltarps® SystemMost basic system offered. Good forapplications where wind and falling debris arenot a problem.

7” Aluminum Pulltarps® SystemDesigned for weight saving applications.Comes complete with windguard.

8.5” Super Shield Pulltarps® SystemRadiused for strength, the 12 gauge steelconstructed housing offers the best protectionfrom falling debris. Powder coated housing toresist corrosion.

X-Pando Pulltarps® SystemSuper tough X-Pando housing that usestelescoping technology to fit any truck from 78”to 102”.

Protector Plus Pulltarps® SystemDesigned for longer applications that requiresome protection from falling debris. Availablein Steel.

Universal Super Shield Pulltarps® SystemSuper strong system with higher tarp capacity.The fully welded 12 gauge steel constructionoffers the best protection from falling debris.

Ultimate Aluminum Pulltarps® SystemDesigned for truck enthusiasts who want theirtarp system to look as good as their rig.

Part # 106-0215

Part # 105-0215

Part # 103-0215 Part # 107-0215

Part # 116-3017

Part # 108-0215

Part # 109-0215Part # 114-0215

Stock Housing Widths 80” , 84” , 87” , 89” , 93” , 96” , & 100”

Steel Protector Pulltarps® SystemDesigned to be mounted against the cab shieldso material will roll o into box. alvanized endplates and housing protect against corrosion.

9” Open Pulltarps® Systemost basic system o ered. ood or

applications where wind and alling debris arenot a problem.

7” Aluminum Pulltarps® SystemDesigned or weig t saving applications.

omes complete with windguar .

8.5” Super Shield Pulltarps® Systemadiused or strength, the 12 gauge steel

constructed housing o ers the best protectionrom alling debris. Powder coated housing to

r .

X-Pando Pulltarps® Systemuper tough X-Pando housing that uses

telescoping technology to t any truck rom 78”to 1 2 .

rotector Plus Pulltarps SystemDesigned or longer applications that requiresome protection rom alling debris. Availablein teel.

Universal Super Shield Pulltarps® Systemuper strong system with higher tarp capacity.

The ully welded 12 gauge steel constructiono ers the best protection rom alling debris.

ltimate Aluminum Pulltarps SystemDesigned or truck enthusiasts who want theirtarp system to look as good as their rig.

Part # 106-0215

Part 1 - 21

Part # 103-0215 Part # 107-0215

Part 11 - 1

Part # 108-0215

Part # 109-0215Part # 114-0215



A c c e s s o r i e s

Ta r p T ame r

When your system is mounted abovethe side rails the Tarp Tamer’s fixed

roller holds the front of the tarp down

to prevent material from blowing

out. The Tarp Tamer can be used

with Pulltarps®, Manual Arms, and

Automatic Arm systems.Part # 501-0701

Ben t A rm Ex t e n s i o n s

Bent arms will stay out of harms waywhile loading. This will increase the

life of your tarp system’s arms. Bent

Extensions can be added to straight

arms as an upgrade. Bent Extensions

are available in 35° bends.35° Extension Part # 501-1230

A r m C at c h e r s

Arm Catchers provide a cradle fothe arms to rest in. A small lip in

the Arm Catcher snaps the arms

in place. This stops the arms from

bouncing while in transit and furthe

reduces noise.

Part # 501-1247

Step 1. Unwrap the rope from the ropehooks on the front of the truck.

Next fl ip the rope over the cornerof the truck body.

Step 2. Using the rope, pull the armsup and over the load. After

deploying the tarp secure the ropeto the rope hooks at the rear of

the truck body.

Step 3. To retract, untie the rope and pulthe rope around the corner of thetruck body. Start the arms back

by hand until the spring tension inthe roller takes over to retract the

tarp all the way.

H ow To Op e r a t e M a n u a l A r m Sy s t em s

S i m p l y t h e B e s t !Pulltarps - California

1404 N. Marshall Ave.El Cajon, CA 92020

Of fice: (619) 449-8860

Fax: (619) 449-3782

(800)-368-3075

Pulltarps - Colorado9700 East 104th Ave. Unit A

Henderson, CO 80640

(800)-368-3075

Pulltarps - Ohio400 W. Elm Street

North Baltimore, OH 45872

(800)-368-3075

w w w . p u l l t a r p s . c o m1-800-368-3075

Made in

The U.S.A.6/8/1* For Full Details on Lifetime Guarantee visit www.pulltarps.com/guarantee.htm

Ta r p T ame r

hen your system is mounted abovethe side rails the Tarp Tamer’s fixed

roller holds the ront o the tarp down

to prevent material from blowing

out. The Tarp Tamer can be used

with Pulltarps®, Manual Arms, and

utomatic Arm systems.Part # 501-0701

Ben t A rm Ex t e n s i o n s

Bent arms will stay out of harms waywhile loading. This will increase the

i e o your tarp system’s arms. Bent

Extensions can be added to straight

arms as an upgrade. Bent Extensions

are available in 35° bends.35° Extension Part # 501-1230

A r m C at c h e r s

Arm Catchers provide a cradle fothe arms to rest in. A small lip in

the Arm atcher snaps the arms

in place. This stops the arms from

bouncing while in transit and furthe

reduces noise.

Part # 501-1247

.Unwrap the rope from the ropehooks on the front of the truck.

Next fl ip the rope over the cornerof the truck body.

.Using the rope, pull the armsup and over the load. After

dep oying the tarp secure the ropeto the rope hooks at the rear of

the truck body.

.To retract, untie the rope and pulthe rope around the corner of thetruck body. Start the arms back

by hand until the spring tension inthe roller takes over to retract the

tarp all the way.

S i m p l y t h e B e s t !Pulltarps - California

1404 N. Marshall Ave.El Ca on, CA 9202

Of fice: (619) 449-8860

Fax: (619) 449-3782

(800)-368-3075

Pulltarps - Colorado9700 East 104th Ave. Unit A

Henderson, CO 80640

(800)-368-3075

Pulltarps - Ohio400 W. Elm Street

North Baltimore, H 4587

(800)-368-3075

w w . p u l l t a r p s . c o m-800-368-3075

ade in

The U.S.A./ /1For Full Details on Lifetime Guarantee visit www.pulltarps.com/guarantee.htm

Documents

Manual Systems