MANUFACTURING

Manufacturers of Turnstiles, Automatic Vehicle Barriers, Mantraps, Security

Booths and Access Control Equipment

Manufacturers of Turnstiles, Automatic Vehicle Barriers, Mantraps, Security

Booths and Access Control Equipment

introduction

The barrier would be installed at an entrance/exit used by vehicles etc. It is renowned for the ability of handling a high flow of traffic.Description

The housing is manufactured from mild steel or stainless steel 3Cr12, epoxy powder coated, various colours are available on request.The mechanism is housed in the top of the housing, witch is easily accesses through a screw-off lid. The door in the front allows easy access to the logics that housed under the mechanism. A separate mounting base, hot dip galvanise, for easy installation and corrosion protection. Power: 220V AC 50Hz

MechanisM

A robust precision mechanism with block bearings is fitted with a 220V torque geared motor for reliable operation and secure locking. The motor and gearbox are enclosed in the same housing and are maintenance free.

Logic

The logics incorporate one Loop Detectors, additional Loop Detectors available on request

Features

• Separate Galvanised-mounting base for, rigidity, rust prevention on ground surface and ease of installation and maintenance

• Torque motor with concealed gearbox (maintenance free)• Printed circuit motherboard with 11pin base plug in connectors; fuse protection• In the event of a power failure the boom can be set to open automatically or stay in a closed position.

appLication

Transit facilities, Industrial facilities, Corporate facilities, Government facilities, Military facilities, Residentail complex

Cape Town:Address: 32 Sycamore Cresent, Atlas Park, Contermans KloofPostal Address: Po Box 759, Durbanville, 7551Tel: 021 556 3866 | Fax: 021 558 3868

Johannesburg Address: 53 Forge Road, Spartan, Kempton ParkPostal Address: Po Box 6850, Halfway House, 1685Tel: 011 975 6400 | Fax: 011 975 2237

Directors: GP Raubenheimer, DS van den Berg | Investage5 (Pty) Ltd t/a iMAT Manufacturing, Reg No: 2001/1015178/07

Automatic vehicle barrier

www.imat.co.za

BOOM 3D

Duard

2012/06/21

Drawn byDate

1 / 1

Sheet

A4

Size

Scale

www.imat.co.zainfo@imat.co.za

iMAT Manufacturing

BOOM ASSEMBLY

Part Number

Description

MaterialTreatment

N.T.S.

Revision

This draw

ing is property of IM

AT m

anufacturing and m

ay not be used or executed w

ithout the w

ritten content of IM

AT m

anufacturing

BOOM DIMENSION

DUARD

2012/06/21

Drawn byDate

2 / 2

Sheet

A4

Size

Scale

www.imat.co.zainfo@imat.co.za

iMAT Manufacturing

BOOM ASSEMBLY

Part Number

Description

MaterialTreatment

N.T.S.

Revision

CONCRETE BASE

500,00

500,00 500,00

BOOM DIMENSION

DUARD

2012/06/21

Drawn byDate

1 / 2

Sheet

A4

Size

Scale

www.imat.co.zainfo@imat.co.za

iMAT Manufacturing

BOOM ASSEMBLY

Part Number

Description

MaterialTreatment

N.T.S.

Revision

1020,00

340,00280,00

926,00

360,00 300,00

340,00

280,00

176,72

176,72

50,00

BOOM BASE FOR MOUNTING

BOOM BODY DIMENSIONS

3CR12

POWDER COATED

PEDESTRIAN CURTAIN

Duard

2012/07/02

Drawn byDate

1 / 1

Sheet

A4

Size

Scale

www.imat.co.zainfo@imat.co.za

iMAT Manufacturing

AUTOMATIC VEHICLE

BARRIER

Part Number

Description

MaterialTreatment

N.T.S.

Revision

This draw

ing is property of IM

AT m

anufacturing and m

ay not be used or executed w

ithout the w

ritten content of IM

AT m

anufacturing

970,00

3430,79

3000,00

700,01