600W　Max output (30V / 20A)

We made it from hearing customer's voice· Lithium batteries can also be charged. (required consultation)· It can be shipped with adjusted voltage and current.· The error code can be output from the charging unit and the power supply unit.

Perfect fit! The charging zone that you never had before!

Just by facing each other!Wireless Power Charging!

24 V system

You can easily install it in your AGV

Is it okay to apply for high frequency

use equipment for the first time?

I want a wireless charging system

that is just right for 50 AH-100 AH

batteries

At present 1KW-3KW, the charge

capacity is large, the installation cost is

too high. 210W charge capacity is low

On the same line using AGV, lead

battery and lithium battery are different for each AGV......

If it is 210W the error information to hard

to understand, is there a product

easier to understand error signal?

There are many wireless charging products from B & PLUS. It is hard to choose. Which one should we pick?

Only be able to charge lead battery?

I want to be able to charge lithium

battery as well.

Benefits of the Wireless Power Charging!

Wireless charging system for AGV 　　　　　　　　　(automated guided vehicle)

【Report of good news from users】

With Wireless Power Charging,· Replacement work became unneces-sary, and it released from heavy work.· Spare battery became unnecessary.· In terms of cost ...Battery replacement, work twice a day, once a day for 15 minutes, and oper-ates 5 AGVs. (Unit Price JPY 3,000 per hour) Working day = 1year 240days 1,500 JPY x 240days x 5units　　　　　　＝1.8 billion JPY Cost down!Improvement in cost reduction was recognized.

I want a signal not only from the charging

unit but also from the power supply unit.

Many opinions from the customers and we’ve found solutions

※ In the case of lithium-ion battery, please contact us

AC90-220V

Charging unitType：RCS600-CA24

Power Supply unitType:RCS600-AC

Active HeadType:RCS600-AHPassive Head

Type：RCS600-CH

AGV side Station side

Various 24V battery

You can use the battery you are using now

600W Product Features

· The operating distance between heads is 20 mm (twice the operating distance of our 210W product).· Battery friendly CC/CV (constant current/ constant voltage) method is adopted.· During charging, various errors can be displayed on the LED and output to the outside (communication function).· Recharge function: While both heads are facing each other, recharging is started when the voltage drops to 24V ± 0.5V after completion of charge.· Over current, over voltage protection function: Charging stops when it exceeds a certain level.· Monitor the battery temperature (thermistor monitoring function) and stops charging when the temperature reaches a certain level or higher.· Charge current · Charge voltage can be set (please contact us).

CC・CV Charging Graph

Constant current/constant voltage (CC · CV) charging control function enables optimum charging for battery.

600W configuration diagram

About charge control

When the battery is in a discharging mode (and the amount of charge is small), constant current (CC) is performed, but when the battery voltage increas-es to reach the charging voltage setting value, the operation proceeds to constant voltage charging control (CV). The charging current is reduced so it will not ex-ceed the set voltage.When the charging current drops to 1.0 A (± 0.5 A), it is regarded as a full charge and the charging is terminated.

【Adjustable range of charge voltage/charge current 】Voltage: 24V ± 0.5V to 30V ± 0.5VCurrent: 10A ± 0.5A to 20A ± 0.5A

Factory settingVoltage：28.8V±0.5VCurrent: 20A± 0.5A

* Setting can be handled at shipment *

※ Charging to a 24V lead battery is the basic specification, but please contact us for application using lithium ion batteries.We have the past result to charge to the lithium ion capacitor.

【SCIB SIP 24-23 50% (11Ah) Charge Characteristics after Discharge / CC Current 20 A CV Voltage 28.6 V】

Time (T)

Voltage Current

Center offset and operating distance

Operating distance can be up to 20mm.Ease of alignment!

Direction DistanceG 0 ～ 20mmX ±10mmY ±15mm

Type code RCS600-CA24

Output voltage ≦30VOutput current ≦20AExternal input Starting charging signalExternal output Ready, Charge, End, Error, E1 ～ E3Operating temperature 0...+50℃Protection class IP40 (Indoor type)C

onnection

Feeding connector Round 3-pin connectorCommunication con-nector Round 5-pin connector

For input/output Connector D-sub 25-pinbattery Battery connection terminal block (terminal screw size M5)Thermistor Terminal block for thermistor connection (terminal screw size M4)

Weight 2680gAccessories Thermistor, Dsub25P-Connector for start signal ON

Type code RCS600-AC

Rated input voltage/Supply voltage AC100V・200V / AC90V ～ 220V　Single-phase 50/60HzCurrent consumption 9A(100V), 4.5A(200V)External input Starting charging signalExternal output Power, Ready, Charge, End, Error, E1 ～ E3Operating temperature 0...+50℃Protection class IP20 (Indoor type)Connection Feeding connector Round 3-pin

Communication connector Round 5-pinOutput signal D-sub 25-pinPower 3P inlet

Weight 3340gAccessories Power cable with ferrite core clamp

Type code RCS600-AH

Operating temperature 0...+50℃Protection class IP65 (Indoor type)

ConnectionPower supply: Round 3 pins (male), communica-tion: Round 5 pins (male) to connect to Power unit

MaterialHousing PPS, aluminumOutput cable φ8.6　2.5mm2x3　KVUSignal cable φ5.6　0.3mm2x4　PU

Weight 2960g(including cable connector part)Accessories Ferrite core clamp(Installed), Central positioning label

Operating distance

Up to 20 mm

OK!

AGV side Station side

Head

unit

Specification

Operating distance　　　 G 20mm

Y direction±15mm

AGV Head

(Top view)

Head

Up and DownX way±10mm

AGV

(Front view)

Head

Active Head

Power Supply unitCharging unit

Type code RCS600-CH

Operating distance 0 ～ 20mmCenter offset ± 10mm in the X axis direction and ± 15mm in the Y axis direction (see above)Operating temperature 0...+50℃Protection class IP65 (Indoor type)

ConnectionPower supply: Round 3 pins (female), Signal: Round 5 pins (female) to connect to charging unit

MaterialHousing PPS, aluminumOutput cable φ8.6　2.5mm2x3　KVUSignal cable φ5.6　0.3mm2x4　PU

Weight 1950g(including cable connector part)Accessories Ferrite core clamp(Installed), Central positioning label

85

125

210

254

4ｘ

7

ﾌｪﾗｲﾄｺｱE04SR401938

ﾌｪﾗｲﾄｺｱRFC-H13

46

3000

84

154

170

26 1500

100

4ｘ7

ﾌｪﾗｲﾄｺｱRFC-H13

45 5

【Cable length with connector】Standard：1.5 ｍEnd of type code-01：1 ｍ-03：3 ｍ 【Cable length with

connector】Standard：3 ｍEnd of type code-01：1 ｍ-02：2 ｍ

Passive HeadFerrite core clampRFC-H13

Ferrite core clampE04SR401938

Connect 3P connector for power supply

Connect 5P connector for communication

Connect 3P connector for power supply

Connect 5P connector for communication

Ferrite core clampRFC-H13

BN1807Ce 2019.09

Wireless charging system current lineup30W 120W 210W

Charging zoneCorre-sponding battery

30W(14.4V/2A)Lead battery only

30W(28.9V/1A)Maxell lithium-ion battery only

120W（14.8V/8.5A)Lead battery only

120W（29.0V/4.3A)Lead battery only

210W(30V/7A)Lead battery only

Type code

RVT-210-502-PURVE-210-2-PU

RCS30-LI24RCS30-TH01RCS30-EH01RCS48-DC1

RVT-433-508-PURVE-433-2-PU

RVT-433-404-PURVE-433-2-PU

RCS210-PB24RCS240PHRCS240AHRCS240-AC1

Size 80x80x30 Head:85x85x26Amplifier:60x93.5x32

110x160x75 110x160x75 Head :100x140x40Charging unit:188x230x50.5Power Supply unit:210x300x80

Operatingdistance

4...10mm 0...20mm 0...10mm 0...10mm 0...10mm

A Note on Using 600W A Note on Using 600W A Note on Using 600W

● This product, which is one of those high frequency utilization equipment of Radio Law.In the case of useing in Japan, please apply for a permission application for high frequency utilizaion equipment permission to Ministry of Internal Affairs and Communications.In the case of using the product out side Japan, please take appropriate action after confirming by yourself the standards and regulations to which the customer’s system should conform.

● For the control communication device that is installed in the product, there is no need for (diploma) radio station authorization of the Minister as it corresponds to “a weak radio station (weak radio equipment)”to. However, please be careful on the occasion of the operation because it may affect medical equipment and electronic equipment (such as pacemakers).

B&Plus has a lot of product lineup to choose from! Small to large capacity!

It's hard to pick but with B&PLUS you can simulation charging!

and 600W→

Compatible withlithium-ion battery!

＊Please feel free to 　　　　　contact us＊

【 Things understood by simulation of the charging 】If you use the charge simulation, you can see that the stop time is long and the charge can be done using the rest time etc. It may be possible to perform “additional charge”.A large capacity may not be able to substitute for a small capacity. As B&PLUS has various products to choose, you can find a reasonable one.

＊Please feel free to contact us＊

　Battery remaining capacity forecast graph

Time (H)

Cap

acit

y (A

H)

【 Simulation confirmation items 】① Check Battery model and battery capacity② Confirm running/stopping time ※ Running time/stop time per cycle③ Confirm consumption current　 Running, stopping and resting time and each current consumptions.④ Can you charge while paused? Does it stop without charging?⑤ Operating hours per day　Confirm the operation status of AGV at the time of starting/ending/ lunch break/immediate and whole day

* Info may change the mention contents such as specifications without a notice. Thank you for understanding

Mail ：b-plus-usa@b-plus-kk.comWeb ：http://www.b-plus-kk.com

Wireless Power Supply by

* Please refer to the instruction manual. It can be download by HP.

Less than 50% remainingNo charge