Upload
vungoc
View
220
Download
2
Embed Size (px)
Citation preview
Marketing Division, Manufacturing Laboratory & Orders
Ci rcu i t D r i ve “The Hendon Common”H e n d o n S o u t h A u s t r a l i a 5 0 1 4
Postal Address
PO Box 2346 Port Adelaide South Australia 5015
Telephone 1800 088 172 • Facsimile 1800 088 254
Email: [email protected]
D Y N E K P T Y L T DABN 16 007 758 465 • WHOLLY AUSTRALIAN OWNED COMPANY
Dynek Sutures manufactured to ISO 13485 - CE marked
T H E S Y M B O L O F T E C H N I C A L E X C E L L E N C E
D Y N E KS U T U R E S
G L O B A L
© Dynek Pty Ltd BE056 05-28-2010
• Manufactured toStandard ISO13485
• CE Mark 0120
• ISO11137
• AQIS Laboratory
Dynek Pty Ltdthe company
Few professions are as demanding as modern medicine. From theskilled hands of the surgeon to the exacting duties of the operatingtheatre staff – surgery offers no room for compromise.This understanding of commitment to Quality is the driving force behindThe Southern Hemisphere’s leading supplier of surgical sutures; DynekPty Ltd.Dynek is proudly Australian owned. Its ‘state of the art’ manufacturinglaboratory is situated in Adelaide, the capital of South Australia, and isCE Marked.The company has been manufacturing quality sutures in South Australiasince 1974 and during this time has not remained inward looking;instead, a commitment to achieving the highest standards hasprevailed, ensuring dynamic growth and world class status as a supplierof the best surgical products.Dynek understands the unique needs of the medical profession andDynek’s fine surgical products exists as a result of close ongoingconsultation with medical professionals, and the knowledge gainedthrough meticulous research and development.Arising from this strong foundation, Dynek has established a reputationfor innovative product development and marketing, and today, suppliesin excess of 2000 different kinds of single use absorbable and non-absorbable sutures.Dynek is the only wholly Australian owned suture company.
DYNEK SUTURES
Plastic Micro Ophthalmic General O & G Cardiovascular Thoracic Paediatric Orthopaedic E.N.T. Neuro Orthodontic
At Dynek,Quality is placedabove all otherconsiderations.
No Compromisein pursuit of excellence
No compromise inProcedures,Equipment orSupplies.
Dynek suturesare made touncompromisingstandards with provenperformance in manyfields of surgery:
‘ s t a t e o f t h e a r t ’ l a b o r a t o r y . . .
A History of research, commitment and successful innovation
Dynek’s success has been widely acclaimed in Australia. Renownedfor its technical excellence, Dynek has produced a world class rangeof sutures, now exported around the globe.With production running into millions of sutures each year, Dyneklooked to the future when investing in a new ‘state of the art’manufacturing laboratory. This facility, along with advances in microengineering, has enhanced productivity and enabled the attainmentof ISO13485 & CE Mark Accreditation.In recent years, research and development has expanded into manynew areas. Dynek recognises that although research absorbs largeamounts of capital, the benefits to the medical profession and mostimportantly, the patient, are of paramount importance.Environmental concerns are foremost in people’s minds. Dynek iscommitted to ensuring that where possible, all products can berecycled or destroyed without harmful residue.A company’s greatest assets are the ideas and the visions of itsemployees.Dynek could not have achieved such advancements in technologywithout the proven performance of a well trained and dedicatedteam. The strength of this company is its people and their ongoingcommitment to quality and service.
Dynek described
Dynek is an equal opportunityemployer; driven by a one levelmanagement system with acommitment to staff trainingand further education.A responsible team ofprofessionals sensitive toenvironmental issues whilefocused on a common goal;the research and developmentof a world class product.
Dynek mission statement
We are committed to being theleading supplier of qualityworld class products in ourfield. Consistently providing alevel of quality andreliability of supply, that willequal or surpass theexpectations of our mostcritical customer.Proudly, our product is a resultof ongoing research anddevelopment, providing longterm benefits to the medicalprofession and mostimportantly the patient.
DYNEK SUTURES
Dynek privacy policy statement
Privacy Policy Objective - Toensure customers and DynekPty Ltd Personnnel understandtheir rights and obligations withregard to preserving theprivacy of our customers.Privacy Statement - It is DynekPty Ltd intention to provide itscustomers with absoluteconfidence that all detailsrecorded by Dynek during thecourse of normal businessoperations are accorded theutmost confidentiality and thatthe full privacy of the customeris maintained at all times.
The Dynek team is totally committed to the successful implementationand maintenance of Total Quality Control.Quality goals are achieved by the development and constant refining ofStandard Operating Procedures, thorough training, and continuouspersonnel education.Briefly, Dynek’s Quality Assurance Programme is executed by:
The employment of a team of Microbiologists to oversee Qualityprocedures.The validation of all incoming material to documented Qualitystandards.Ongoing Quality control checks made on all aspects of suturemanufacture.Strict testing procedures carried out to exacting Quality standards.The commitment of all personnel to support the company mandateto achieve, at all times, Quality in excess of that specified by worldstandards.
Dynek sutures are manufactured to Standard ISO 13485.Dynek is a company in which Total Quality Control is placed above allother considerations, a company whose primary task is absolutecustomer satisfaction and confidence in a product manufactured withpride under the Dynek trademark.
plastic surgerygeneralcardiac/thoracicobstetrics and gynaecologyophthalmic & micro surgery
Needle specifications include:reverseconventionalFineline*straight cuttinground bodied taperLancet-SpatulaA-cute* taperreverse premium cutting point
Threads range from:Plain catgutChromic catgutSilkNylonPolyetherPolyesterPolyvinylidene fluoride(PVDF)Polyglycolideothers available on request.
Qualitythe first word in our product
DYNEK SUTURES
DYNEK SUTURE MATERIALS AND TRADEMARKSAbsorbable Sutures (Single use only)
Non Absorbable Sutures (Single use only)
FINELINE* Needle
A-CUTE* TAPER Needle
Dermaloc* Skin Tone wound closure strips
Other non suture
IMPORTANT: Dynek sutures are single use only devices and should not be re-sterilised
The information contained in this catalogue is intended as a guide only.The final decision on suture selection and subsequent use remains the Surgeon’s.
CG No Trademark Chromic Catgut
PG No Trademark Plain Catgut
B Biovek* Violet braided coated polyglycolide Synthetic Absorbable
B-C Biovek* (undyed) Beige braided coated polyglycolide Synthetic Absorbable
V VILENE* Blue Monofilament Polyvinylidene Fluoride
N NYLENE* Blue Monofilament Nylon
D DYLOC* Blue Monofilament Polyether
S DYSILK* Black Braided Treated Silk
P-S DYFLEX* Green Braided Treated Polyester
P POLYFLEX* Black Braided Treated Polyester
T TEFLEX* White Braided Treated Polyester
R RADENE* Yellow Monofilament Polyvinylidene Fluoride
** TRADEMARK
DYNEK Research and Development leads to continuous improvement and replacement of products, andwe therefore reserve the right to make changes to specifications without notice.
CODE PRODUCT MATERIAL
CODE PRODUCT MATERIAL
CODE PRODUCT DESCRIPTION
DYNEK SUTURES
HOW TO INTERPRET DYNEK CODE NUMBERS
Code numbering is very important in the stock control and selection of sutures. There are manydifferent types, and this can make the choice difficult. We believe that codes must be kept simpleand should be easy to decipher.
The codes convey three pieces of information:A. The first letter(s) refer to the material.B. The next number(s) refer to the USP thread size.C. The final number(s) refer to the needle code.* If #1 precedes the thread size, this indicates a longer thread length than the standard.For example, N-306 has a 45cm thread, where N-1306 has a 76cm thread.
Pre-cut Lengths:Pre-cut lengths of sutures also have an easy to understand coding system. Please remember thatthe second letter of the code is equal to its numerical partner, i.e. A equals one strand; B equals twostrands; C equals three strands etc. The first number(s) indicate the USP thread size. The last twonumbers represent the thread length in inches eg: SM4024 = Silk x 13 strands size USP 4/0 x 24inches in length.Once the coding is understood it is possible to use the code without the catalogue. In a teachinghospital it is good practice for staff to be able to explain what they are using and how they selectedit.Symbol:The Symbol on the foil packet indicates the needle typeeg: = round bodied taper needle, = reverse cutting needleDouble Armed:Double armed sutures have two symbols ( ) next to the needle profile, to note two needles arein the foil packet.
Needle Type
Expiry Date
Lot No.
C: Needle Number in CatalogueB: Suture
A: Refers to the Suture Material
USP
Length of Thread
Thread
Lift & Tear
DYNEK SUTURES
Single Use Only
Instructions For Use
PACKAGING INFORMATION
Packaging:
The packaging of sutures is very important toeveryone. Consequently, Dynek has developeda suture packet which is easy to use.
All Dynek sutures are colour coded using theinternationally accepted system, which allowseasy transition from one brand to another.
The Dynek primary foil packs are quick andeasy to open revealing the needle locked inplace to help prevent needle stick injury.
Expiry Dates:
To minimise stock holding, every Dynek primarypack and box label has the expiry date clearlyshown. This provides the Operating RoomStaff the ability to issue the sutures to otherareas.
Lot Numbers:
Every Dynek foil and label is clearly markedwith the lot number. Each lot number allows theproduct to be traced through every step ofproduction, ensuring maximum manufacturingcontrol and traceability.
DYNEK SUTURES
Specifications forAbsorbable Catgut Sutures
USP METRIC DIAMETER (MM) USP METRIC DIAMETER (MM)SIZE SIZE MINIMUM MAXIMUM SIZE SIZE MINIMUM MAXIMUM
10/0 0.2 0.020 0.029 9/0 0.3 0.030 0.039 8/0 0.4 0.040 0.049 7/0 0.5 0.050 0.069 6/0 0.7 0.070 0.099 5/0 1 0.100 0.149 4/0 1.5 0.150 0.199 3/0 2 0.200 0.249 2/0 3 0.300 0.349 0 3.5 0.350 0.399 1 4 0.400 0.499 2 5 0.500 0.599
3 and 4 6 0.600 0.699 5 7 0.700 0.799 6 8 0.800 0.899 7 9 0.900 0.999
Specifications forStainless Steel Sutures
Specifications forSynthetic Absorbable Sutures
USP METRIC DIAMETER (MM) USP METRIC DIAMETER (MM)SIZE SIZE MINIMUM MAXIMUM SIZE SIZE MINIMUM MAXIMUM
2/0 3 0.300 0.3490 3.5 0.350 0.3991 4 0.400 0.4992 5 0.500 0.599
3 and 4 6 0.600 0.6995 7 0.700 0.7996 8 0.800 0.8997 9 0.900 0.999
DYNEK SUTURES
STANDARDS FOR SUTURE DIAMETER
8/0 0.5 0.050 0.0697/0 0.7 0.070 0.0996/0 1 0.100 0.1495/0 1.5 0.150 0.1994/0 2 0.200 0.2493/0 3 0.300 0.3492/0 3.5 0.350 0.3990 4 0.400 0.4991 5 0.500 0.5992 6 0.600 0.6993 7 0.700 0.7994 8 0.800 0.899
10/0 0.2 0.020 0.0299/0 0.3 0.030 0.0398/0 0.4 0.040 0.0497/0 0.5 0.050 0.0696/0 0.7 0.070 0.0995/0 1 0.100 0.1494/0 1.5 0.150 0.1993/0 2 0.200 0.2492/0 3 0.300 0.349
0 3.5 0.350 0.399 1 4 0.400 0.499 2 5 0.500 0.599 3 and 4 6 0.600 0.699 5 7 0.700 0.799
Specifications forNon-Absorbable Sutures
NEEDLE SPECIFICATIONS Types and Suggested Uses
Round Bodied needle with a special hand finished cutting point toallow for easier penetration through hardened or calcified tissue. Theneedle is constructed from a 300 series stainless steel whichpromotes easier penetration with an increased resistance to bending.Ideal for placing heart valves. This needle is frequently used incardiovascular and dental surgery.
Round bodied point for soft, easily penetrated tissues.
For the Operating Room Technician and Surgeon concerned withneedle stick injury, DYNEK has a range of Blunt Point needles forIntestinal Surgery.
A special hand finished reverse cutting needle; this needle has beendesigned specifically for delicate tissue, ideal for plastic surgery. Thepoint of the needle is covered with a plastic envelope to protect thehand honed extra sharp point.
All DYNEK standard reverse cutting needles are strong and retaintheir sharpness. This triangular cutting needle is considerably moreresistant to bending than the standard conventional needle.
A plastic surgery needle with a flat shank, not reverse cutting.Designed to be used with a Gilles needle holder.
A triangular cutting needle with the third cutting edge on the insideapex of the needle.
Side cutting and hand honed for extra sharpness and penetration,commonly used in Ophthalmic surgery.
Needles have been silicone treated as this has shown to increaseease of penetration.
Dynek has introduced its world leading CV300 needles forcardiovascular surgery. This needle has been developed to achieveextra penetration and maximum resistance to bending.
We have a range of heavy Mayo type needles for all types ofObstetrics/Gynaecology and Orthopaedic surgery.
FINELINE*
REVERSE PREMIUM CUTTINGPOINT (P.C.P.)
BLUNT
REVERSE
CONVENTIONAL
LANCET - SPATULA
ROUND BODIED
If your needle has not beenlisted, please ask us.We have a very large rangeof sutures and the list isgrowing.
SILICONISED
CV300
A-CUTE* TAPER
DRILLEDTo further reduce patient trauma, all DYNEKneedles are drilled end.Each needle is drilled for the exact size ofsuture. This has allowed us to obtainmaximum fusion between needle and thread.For minimal tissue drag, DYNEK uses drilledend needles rather than the outdatedchannelled needles.
OUR CHANNELLED
DYNEK SUTURES
NEEDLE SELECTION
DYNEK SUTURES
REVERSE PREMIUM CUTTING POINTNEEDLES1/2 Circle REVERSE PREMIUM CUTTINGPOINT
16 15MM
NEEDLE LENGTH (MM)
3/8 Circle REVERSE PREMIUM CUTTINGPOINT
3/8 Circle REVERSE CUTTING
NEEDLE LENGTH (MM)
2
40
4
5
6
47
7
9
31
13
10
12MM
13MM
16MM
18MM
24MM
26MM
28MM
30MM
35MM
40MM
45MM
15
14
34
90
16MM
18MM
25MM
60MM
REVERSE CUTTING NEEDLES1/2 Circle REVERSE CUTTING
2D 11MM
24
20
3
21
8
16MM
18MM
20MM
24MM
26MM
13MM49
25
26
27
16MM
20MM
25MM
NEEDLE LENGTH (MM)
FINELINE* CUTTING NEEDLES3/8 Circle FINELINE* CUTTING
NEEDLE SELECTION
DYNEK SUTURES
ROUND BODIED TAPER NEEDLES1/2 Circle ROUND BODIED TAPER CV300
CONVENTIONAL CUTTING NEEDLES1/2 Circle CONVENTIONAL CUTTING
18 22MM
NEEDLE LENGTH (MM)
3/8 Circle CONVENTIONAL CUTTING
NEEDLE LENGTH (MM)
A-CUTE* TAPER NEEDLES1/2 Circle A-CUTE* TAPER
3/8 Circle A-CUTE* TAPER
1/2 Circle ROUND BODIED TAPER HEAVY
NEEDLE LENGTH (MM)
18MM
20MM
25MM
35MM
45MM
55MM
35
58
32
42
44
83
51
55
60
64
65
68
69
70
85
10MM
13MM
16MM
18MM
20MM
25MM
30MM
35MM
65MM
86 76MM
97E5 40MM
70E5 35MM
98E5 48MM
63 18MM
97 40MM
98 48MM
11 90MM
37 16MM
NEEDLE SELECTION
DYNEK SUTURES
52
53
54
66
57
67
72
10MM
13MM
16MM
18MM
20MM
25MM
30MM
30
33
60MM
260MM
NEEDLE LENGTH (MM)
STRAIGHT CUTTING NEEDLES
3/8 Circle ROUND BODIED TAPER CV300NEEDLE LENGTH (MM)
Other Needles Available on Special Request
3/8 Circle ROUND BODIED TAPER
3519 3.5MM
NEEDLE LENGTH (MM)
0.05MM
DIAM (MM)
351 3.5MM 0.07MM
MICRO NEEDLES
1/4 Circle LANCET SPATULA
1/2 Circle LANCET SPATULA
LANCET-SPATULA NEEDLES3/8 Circle LANCET SPATULANEEDLE LENGTH (MM) DIAM (MM)
6010 6MM 0.15MM
6MM 0.20MM
6411 6.4MM 0.20MM
6011
6410 6.4MM 0.15MM
809 8.0MM 0.35MM
CARDIO POINT NEEDLES 3/8 Circle CARDIO POINT
NEEDLE LENGTH (MM) DIAM (MM)
8022 8.0MM 0.25MM
13022 13.0MM 0.25MM
8520 8.5MM 0.30MM
643 6.4MM 0.15MM
644 6.4MM 0.20MM
5.0MM 0.15MM503
805 8.0MM 0.23MM
J TYPE ROUND BODIED TAPER CV300
1/4 Circle ROUND BODIED TAPER CV300
71 25MM
78 30MM
5.0MM 0.07MM501
5.0MM 0.10MM502
6.0MM 0.15MM603
8023 8.0MM 0.30MM
6012 6.0MM 0.15MM
9022 9.0MM 0.25MM
Experience has shown that Vilene* has excellentknot security. The springiness that affects allmonofilaments when removed from the package canbe taken out by a gentle pull. It can be used in allprocedures where polypropylene monofilaments areutilised.
Unlike polypropylene which after sterilisation is waxyin feel and is prone to fraying, Vilene* is smooth, frayfree and supple. Vilene* is sterilised by gammairradiation.
NOTES1. Standard knot pull is as stated in European Pharmacopeia Vol. III and US PharmacopeiaVol. XXI for Non-absorbable sutures Class 1 – plus 25% for non-sterile sutures.
2. Standard knot pull test is made with a simple knot.
3. Elongation is the extension of the material at break or rupture in a straight pull testexpressed as a percentage of the original length.
CV 300 needle - all Dynekcardiovascularsutures use a CV300 needle givingthe Surgeon optimum performancefrom both suture material and needle.
Knotting:As with all synthetic non-absorbable sutures,knot tying requires the standard surgicaltechnique of flat and square ties withadditional throws as indicated by surgicalcircumstance.
Vilene* is available on thefollowing needles:• Fineline* Cutting• Reverse Cutting• Reverse Premium Point Cutting• Round Bodied Taper• Round Bodied A-Cute* Taper
Both single & double armed suturesare available.
USP THREAD
7/ 6/ 5/ 4/ 3/ 2/ 1/ 1 2
4
6
8
VILENE* POLYPROPYLENE
TE
NS
ILE S
TR
EN
GT
H
0
1
2
3
4
0
ELO
NG
AT
ION
V I L E N E *
P O LY P R O P Y L E N E
VILENE* DYNEK SUTURES AUSTRALIA
MONOFILAMENT P.V.D.F.
VILENE* is a monofilament of PolyvinylideneFluoride (PVDF) which is non–absorbable and isphysiologically inert. Maintaining it’s tensile strengthin situ, Vilene* provides superior clinical benefits tothe Surgeon. Combining the high tensile strengthand low elongation (see chart below) gives itexcellent handling and knotting properties.
Reaction: minimal tissue reaction
DYNEK SUTURES
REVERSE CUTTING
VILENE* MONOFILAMENT POLYVINYLIDENE FLUORIDE (PVDF)
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
2
12mm 3/8 CIRCLE
2+2
12mm 3/8 CIRCLE
4
16mm 3/8 CIRCLE
5
18mm 3/8 CIRCLE
6
24mm 3/8 CIRCLE
47
26mm 3/8 CIRCLE
45 V602 V502
76 V1602*
76 DV602*
45 V604 V504
76 V1504
45 V505 V405 V305
76 V1405 V1305*
45 V406 V306
76 V1306 V1206
45 V2047*
Sub-Cuticular
Plastic
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0
0.7 1 1.5 2 3
NEEDLE DESCRIPTION
DYNEK SUTURES
REVERSE CUTTING
VILENE* MONOFILAMENT POLYVINYLIDENE FLUORIDE (PVDF)
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
7
28mm 3/8 CIRCLE
9
30mm 3/8 CIRCLE
13
40mm 3/8 CIRCLE
15
16mm 1/2 CIRCLE
30
60mm STRAIGHT
45 V207*
76 V209*
76 V2013
Sub-Cuticular
Plastic
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0
0.7 1 1.5 2 3
NEEDLE DESCRIPTION
100 V12013*
45 V4015*
100 V3030 V2030
DYNEK SUTURES
CONVENTIONAL37
16mm 3/8 CIRCLE
V503745 Plastic
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0
0.7 1 1.5 2
NEEDLE DESCRIPTION
45 V6025* V5025* V4025* V3025* Plastic
45 V3027* Plastic
LENGTH(cm) SUGGESTED USE
VILENE* MONOFILAMENT POLYVINYLIDENE FLUORIDE (PVDF)
* A minimum order quantity may apply to this product
25
16mm 3/8 CIRCLE
27
25mm 3/8 CIRCLE
FINELINE* CUTTING
45 V6049* V5049* Plastic
45 V6024* V5024 V4024* Plastic
45 V5020* V4020 Plastic
45 V3021 Plastic
45 V4016* Plastic
49
13mm 3/8 CIRCLE
24
16mm 3/8 CIRCLE
20
18mm 3/8 CIRCLE
21
24mm 3/8 CIRCLE
16
15mm 1/2 CIRCLE
45 V602D* V502D* Plastic
2D
11mm 3/8 CIRCLE
REVERSE PREMIUM CUTTING POINT
DYNEK SUTURES
51+51
10mm 1/2 CIRCLE CV 300
55+55
13mm 1/2 CIRCLE CV 300
60+60
16mm 1/2 CIRCLE CV 300
64
18mm 1/2 CIRCLE CV 300
64+64
18mm 1/2 CIRCLE CV 300
65
20mm 1/2 CIRCLE
35+35
18mm 1/2 CIRCLE CV 300
32+32
25mm 1/2 CIRCLE CV 300
42+42
35mm 1/2 CIRCLE CV 300
VILENE* MONOFILAMENT POLYVINYLIDENE FLUORIDE (PVDF)
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
* A minimum order quantity may apply to this product
90 DV5035* DV4035* DV3035* Cardiovascular
90 DV2032* Cardiovascular
90 DV2042* Cardiovascular
76 DV7051* DV6051* DV5051*
76 DV6055*
90 DV5055*
90 DV5060* DV4060* DV3060*
76 V5064* V4064* V3064*
90 DV6064* DV5064* DV4064* DV3064*
76 V3065*
DYNEK SUTURES
ROUND BODIED TAPER •
A-CUTE* TAPER
METRIC
THREAD SIZE
USPNEEDLE DESCRIPTION
7/0 6/0 5/0 4/0 3/0 2/0
0.5 0.7 1 1.5 2 3
LENGTH(cm) SUGGESTED USE
70E5
97E5
98E5
VILENE* MONOFILAMENT POLYVINYLIDENE FLUORIDE (PVDF)
LENGTH(cm) SUGGESTED USE
METRIC
THREAD SIZE
USP5/0 4/0 3/0 2/0 0 1
1 1.5 2 3 3.5 4
NEEDLE DESCRIPTION
65+65
20mm 1/2 CIRCLE CV 300
68
25mm 1/2 CIRCLE CV 300
68+68
25mm 1/2 CIRCLE CV 300
70+70
35mm 1/2 CIRCLE CV300
69
30mm 1/2 CIRCLE
78
30mm J Needle
70
35mm 1/2 CIRCLE
General /Intestinal
Laparoscopy
General /Intestinal
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
90 DV4065* DV3065*
76 V4068 V3068 V2068 V068*
90 DV5068* DV4068* DV3068* DV2068*
120 DV13068 DV12068*
76 V2069* V169*
100 V078*
76 V2070*
100 V070 V170*
120 DV3070* DV2070*
* A minimum order quantity may apply to this product
ROUND BODIED TAPER •
ROUND BODIED TAPER NEEDLES (HEAVY)
35mm 1/2 CIRCLE
100
76
48mm 1/2 CIRCLE
40mm 1/2 CIRCLE
V097E5
V198E5*
V197E5
100
ObstetricsGynaecologyOrthopaedics
ObstetricsGynaecologyOrthopaedics
ObstetricsGynaecologyOrthopaedics
V070E5*
E5 - Heavy needle
DYNEK SUTURES
53+53
13mm 3/8 CIRCLE CV 300
54+54
16mm 3/8 CIRCLE CV 300
67+67
25mm 3/8 CIRCLE CV 300
ROUND BODIED TAPER •
VILENE* MONOFILAMENT POLYVINYLIDENE FLUORIDE (PVDF)
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this productE2 - Non reflective needle
Cardiovascular
Cardiovascular
Cardiovascular
METRIC
THREAD SIZE
USP8/0 7/0 6/0 5/0 4/0 3/0
0.23 0.5 0.7 1 1.5 2
NEEDLE DESCRIPTION
52+52
10mm 3/8 CIRCLE
13mm 3/8 CIRCLE
CV 300
76
90
90
53
DV6053*DV6053E2*
DV5053*DV5053E2*
DV7053*
DV5054* DV4054*
DV3067*
DV7052* DV4052*DV5052*DV6052*
V6053* V5053*
100
76
76 Cardiovascular
Cardiovascular
DYNEK SUTURES
805
8mm 3/8 CIRCLE
60 GV7G805*
805
8mm 3/8 CIRCLE
60 GDV7G805*
603
6mm 3/8 CIRCLE
30 GDV8E603*
CARDIO CUTTING POINT MULTIPACK
60 GDV7G9022MD
9022
9mm 3/8 CIRCLE
(4 sutures per pack)
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
Radene* provides significant benefitsin the areas of laparoscopic surgery,cardiovascular surgery and in plasticsurgery particularly in the hairline.
Knotting:As with all synthetic non-absorbable sutures, knottying requires the standard surgical technique of flatand square ties with additional throws as indicatedby surgical circumstance.
CV 300 needle - all Dynek cardiovascularand laparoscopic sutures use a CV300 needlegiving the Surgeon optimum performance fromboth suture material and needle
RADENE* DYNEK SUTURES AUSTRALIA
Reaction: minimal tissue reaction
MONOFILAMENT P.V.D.F.
RADENE* was developed for procedureswhere an increased contrast is required.Radene* is a yellow suture thread andmaintaining all the characteristics of the DynekVilene* suture material, provides Surgeonswith the ability to choose a colour that will givethem the best contrast in the clinical situation.
Radene* is available on the followingneedles:
• Reverse Cutting
• Reverse Premium Cutting Point
• Round Bodied Taper
• Round Bodied A-Cute* Taper
Both single and double armed suturesare available. Experience has shown thatRadene* has excellent knot security. Thespringiness that affects all monofilaments whenremoved from the package can be taken outby a gentle pull. It can be used in all procedureswhere polypropylene monofilaments areutilised.
Unlike polypropylene which after sterilisationis waxy in feel and is prone to fraying,Radene* is smooth, fray free and supple.Radene* is sterilised by gamma irradiation.
DYNEK SUTURES
2D
11mm 3/8 CIRCLE
6
24mm 3/8 CIRCLE
24
16mm 3/8 CIRCLE
20
18mm 3/8 CIRCLE
58+58
20mm 1/2 CIRCLE CV 300
REVERSE CUTTING
RADENE* MONOFILAMENT POLYVINYLIDENE FLUORIDE (PVDF)
LENGTH(cm) SUGGESTED USE
A-CUTE* TAPER
ROUND BODIED TAPER •
REVERSE PREMIUM CUTTING POINT
90 DR4058* Cardiovascular
45 R6024* R5024 Plastic
45 R4020 Plastic
45 R602D* Plastic
45 R306 Sub-cuticular
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0
0.7 1 1.5 2
NEEDLE DESCRIPTION
60
16mm 1/2 CIRCLE CV300
* A minimum order quantity may apply to this product
45 R4060 R3060* PaediatricLaparascopic
Cardiovascular
DYNEK SUTURES
45 R405* Sub-cuticular
5
18mm 3/8 CIRCLE
64+64
18mm 1/2 CIRCLE CV 300
65+65
20mm 1/2 CIRCLE CV 300
68+68
25mm 1/2 CIRCLE CV 300
69+69
30mm 1/2 CIRCLE CV 300
70
35mm 1/2 CIRCLE CV 300
52+52
10mm 3/8 CIRCLE CV 300
53+53
13mm 3/8 CIRCLE CV 300
57
20mm 3/8 CIRCLE CV 300
RADENE* MONOFILAMENT POLYVINYLIDENE FLUORIDE
LENGTH(cm) SUGGESTED USE
ROUND BODIED TAPER •
* A minimum order quantity may apply to this product
90 DR5064*
90 DR4065*
90 DR4068* DR3068*
90 DR3069* DR2069*
120 DR13069*
90 DR3070*
60 DR7052*
90 DR6053* DR5053*
90 DR4057*
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
METRIC
THREAD SIZE
USP7/0 6/0 5/0 4/0 3/0 2/0
0.5 0.7 1 1.5 2 3
NEEDLE DESCRIPTION
DYNEK SUTURES
MONOFILAMENT SUTURE
DYLOC* is a monofilament of a thermoplasticpolyether-ester elastomer.
DYLOC* is the ideal suture for the discerningSurgeon. Its advantages are:
• Softness• Pliability• Excellent tying properties• Good tensilestrength• Excellent elasticproperties
DYLOC* is soft and very manageable. It tiesvery much like silk as the stretch in the sutureallows for the material to hold its knot.
Knotting:As with all synthetic non-absorbable sutures, knottying requires the standard surgical technique offlat and square ties with additional throws asindicated by surgical circumstance.
IMPORTANTAs DYLOC* is a monofilamentpolyether and has elasticproperties, care should betaken when using it as asubcuticular stitch.Do not pull tightly or overstretch as it may recoil whenbeing removed.
DYLOC * DYNEK SUTURES AUSTRALIA
Reaction: minimal tissue reaction
DYNEK SUTURES
2
12mm 3/8 CIRCLE
4
16mm 3/8 CIRCLE
5
18mm 3/8 CIRCLE
6
24mm 3/8 CIRCLE
7
28mm 3/8 CIRCLE
9
30mm 3/8 CIRCLE
13
40mm 3/8 CIRCLE
15
16mm 1/2 CIRCLE
14
18mm 1/2 CIRCLE
DYLOC * MONOFILAMENT POLYETHER
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
REVERSE CUTTING
Plastic
Sub-Cuticular
Biopsy suture
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
45 D602 D502 D402*
76 D1602* D1502*
45 D604 D504 D404 D304
76 D1404*
30 D405Z
45 D605* D505 D405 D305
76 D1405* D1305*
45 D406 D306 D206
76 D1306* D1206*
45 D307* D207* D07*
76 D1307*
45 D309
76 D1209*
45 D3013*
45 D5015*
45 D5014* D4014*
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0 0
0.7 1 1.5 2 3 3.5
NEEDLE DESCRIPTION
DYNEK SUTURES
DYLOC* MONOFILAMENT POLYETHER
LENGTH(cm) SUGGESTED USE
2D
11mm 3/8 CIRCLE
60mm STRAIGHT
* A minimum order quantity may apply to this product
REVERSE CUTTING
FINELINE* CUTTING
45 D6025* D5025 D4025* D3025* Plastic
45 D4026* D3026* Plastic
45 D4027* D3027* Plastic
45 D6049* D5049* Plastic
45 D6024* D5024* D4024* Plastic
45 D3021* Plastic
45 D602D* D502D* Plastic
100 D3030* D2030* Sub-Cuticular
49
13mm 3/8 CIRCLE
24
16mm 3/8 CIRCLE
21
24mm 3/8 CIRCLE
25
16mm 3/8 CIRCLE
26
20mm 3/8 CIRCLE
27
25mm 3/8 CIRCLE
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0
0.7 1 1.5 2 3
NEEDLE DESCRIPTION
REVERSE PREMIUM CUTTING POINT
30
DYNEK SUTURES
DYLOC* MONOFILAMENT POLYETHER
LENGTH(cm) SUGGESTED USE
ROUND BODIED TAPER •
* A minimum order quantity may apply to this product
71
25mm 1/4 CIRCLE
68
25mm 1/2 CIRCLE
70
35mm 1/2 CIRCLE
53
13mm 3/8 CIRCLE
54
16mm 3/8 CIRCLE
120 D12071*
76 D3068* D2068* D068* D168*
76 D2070* D070*
76 D5053* D4053*
76 D3054*
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
METRIC
THREAD SIZE
USP5/0 4/0 3/0 2/0 0 1
1 1.5 2 3 3.5 4
NEEDLE DESCRIPTION
ROUND BODIED TAPER (HEAVY) •
40mm 1/2 CIRCLE
97E5
General /IntestinalD097E5* D197E5*100
DYNEK SUTURES
BLUE MONOFILAMENT NYLON
NYLENE* is an excellent material,which has the advantage of surfacesmoothness and completelyuniform diameter throughout thelength of the suture thread.
NYLENE* is pliable, smooth, easyto handle, has excellent knotholding ability and minimal tissuereaction.
NYLENE* is extremely strong,it has been extruded througha diamond die into a singlemonofilament strand.
This process produces a hightensile strength material.
NYLENE* is available on awide range of needles to meetthe varying surgical requirementsincluding
• Plastic• General/Intestinal• Sub-Cuticular• Ophthalmic• Micro
NYLENE * DYNEK SUTURES AUSTRALIA
Reaction: minimal tissue reaction
NYLENE* is available on a wide range ofneedles
• Reverse cutting needle
• Reverse premium cutting point needle
• Fineline* conventional cutting needle
• Round Bodied Taper needle
• Lancet Spatula needle
Nylene a popular choice for general andspecialised surgical procedures
Knotting:As with all synthetic non-absorbable sutures, knottying requires the standard surgical technique of flatand square ties with additional throws as indicatedby surgical circumstance.
DYNEK SUTURES
45
N6025* N5025 N4025 N3025*
N4025C* N3025C* Clear Clear
45
N5026* N4026* N3026*
N4026C* Clear
45 N5027* N4027* N3027*
NYLENE* MONOFILAMENT NYLON
LENGTH(cm) SUGGESTED USE
REVERSE PREMIUM CUTTING POINT
* A minimum order quantity may apply to this product
FINELINE* CUTTING
Plastic
Plastic
Plastic
25
16mm 3/8 CIRCLE
26
20mm 3/8 CIRCLE
27
25mm 3/8 CIRCLE
49
13mm 3/8 CIRCLE
24
16mm 3/8 CIRCLE
20
18mm 3/8 CIRCLE
3
20mm 3/8 CIRCLE
45 N6049* N5049 Plastic
45 N6024 N5024 N4024 Plastic
45 N5020* N4020* N3020 Plastic
45 N403* Plastic
2D
11mm 3/8 CIRCLE
45 N602D N502D* Plastic
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0
0.7 1 1.5 2
NEEDLE DESCRIPTION
DYNEK SUTURES
45 N604 N504 N404 N304
76 N1504 N1404 N1304*
45 N605 N505 N405 N305
45 N305C* Clear
76 N1505 N1405 N1305
76 N1305C*
Clear
45 N406 N306 N206
76 N1406 N1306 N1206
45 N3047 N2047
45 N207 N07*
76 N1207
45 N3013* N2013 N013*
76 N12013* N1113*
45 N2010* N110*
76 N12010* N1110*
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
REVERSE CUTTING
2
12mm 3/8 CIRCLE
4
16mm 3/8 CIRCLE
5
18mm 3/8 CIRCLE
6
24mm 3/8 CIRCLE
47
26mm 3/8 CIRCLE
7
28mm 3/8 CIRCLE
9
30mm 3/8 CIRCLE
13
40mm 3/8 CIRCLE
10
45mm 3/8 CIRCLE
Plastic
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0 0 1
0.7 1 1.5 2 3 3.5 4
NEEDLE DESCRIPTION
NYLENE* MONOFILAMENT NYLON
N209* N09*45
DYNEK SUTURES
45 N602 N502 N402
45 N5014* N4014*
76 N117*
100 N3030 N2030
45 N4015*
45 N017*
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
CONVENTIONAL CUTTING
15
16mm 1/2 CIRCLE
14
18mm 1/2 CIRCLE
17
35mm 1/2 CIRCLE
12
40mm 1/2 CIRCLE
30
60mm STRAIGHT
11
90mm 3/8 CIRCLE
76 N2011* N011* N111* N211* Sub-Cuticular
METRIC
THREAD SIZE
USP5/0 4/0 3/0 2/0 0 1 2
1 1.5 2 3 3.5 4 5
NEEDLE DESCRIPTION
NYLENE* MONOFILAMENT NYLON
REVERSE CUTTING
DYNEK SUTURES
76 N1012* N1112*
STERILE LENGTHS - NON NEEDLE
LENGTH(cm) SUGGESTED USE
ROUND BODIED TAPERBLACK BRAIDED NYLON - NON NEEDLE Available on request
* A minimum order quantity may apply to this product
54
16mm 3/8 CIRCLE
68
25mm 1/2 CIRCLE
69
30mm 1/2 CIRCLE
70
35mm 1/2 CIRCLE
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
Pre cutlengths
Pre cutlengths
100 NA4040* NA3040* NA2040* NA040* NA140* NA240*
76 NA3030*
76 N4054*
76 N3068* N2068 N068*
76 N070* N170*
METRIC
THREAD SIZE
USPNEEDLE DESCRIPTION
NYLENE* MONOFILAMENT NYLON
ROUND BODIED TAPER - BLACK BRAIDED NYLON •55
13mm 1/2 CIRCLE
BN4055Z
BN4064ZMH
General /Intestinal45
4/0 3/0 2/0 0 1 2
1.5 2 3 3.5 4 5
DYNEK SUTURES
E5 - Heavy needle
45
76 N2069 N069* N169*
100 N1169
ROUND BODIED TAPER - BLACK BRAIDED NYLON MULTIPACK •64
18mm 1/2 CIRCLE
General /Intestinal
(8 sutures per pack)
* A minimum order quantity may apply to this product
ROUND BODIED TAPER (HEAVY)•70E5
35mm 3/8 CIRCLE
97E5
40mm 1/2 CIRCLE
98E5
48mm 1/2 CIRCLE
N070E5*
N097E5 N197E5*
N298E5*N098E5* N198E5*
N1198E5
General /Intestinal
General /Intestinal
General /Intestinal
76
100
76
100
DYNEK SUTURES
E5 - Heavy needle
LENGTH(cm) SUGGESTED USE
METRIC
THREAD SIZE
USPNEEDLE DESCRIPTION
NYLENE* MONOFILAMENT NYLON
4/0 3/0 2/0 0 1 2
1.5 2 3 3.5 4 5
* A minimum order quantity may apply to this product
ROUND BODIED TAPER •501
5mm 3/8 CIRCLE
503
5mm 3/8 CIRCLE
603
6mm 3/8 CIRCLE
GN10B501*
GN9B503E2*
GN8B603*
General /Intestinal
General /Intestinal
General /Intestinal
15
15
10
E5 - Heavy needle
LENGTH(cm) SUGGESTED USE
METRIC
THREAD SIZE
USPNEEDLE DESCRIPTION
NYLENE* MONOFILAMENT NYLON
10/0 9/0
0.07 0.15
6012
6mm 1/2 CIRCLE
GN10A6012*Ophthalmic
10
LANCET SPATULA
E2 - Non-reflective needle
BLACK BRAIDED TREATED SILK
DYSILK* is a natural fibre and has beenmanufactured to a high standard. It has beenspecially braided to allow ease of handling.
The individual filaments of the highest qualitysilk are specially treated to give goodhandling properties. The braid is made upof a core of twisted silk around which acover is plaited. Special processes are thenapplied to ensure regularity of diameter,surface smoothness and the best extensionfor good knotting characteristics.
DYSILK* is available on a wide range of needles tomeet the varying surgical requirements including.
Plastic Surgery
Cardiovascular
Dental
Oral maxillo facial
Ophthalmic
Sub-Cuticular
General Intestinal
Needles include:
• Reverse cutting• Fineline* cutting• Reverse premium cutting point• Round Bodied taper• A-Cute* taper• Conventional• Lancet - Spatula• Straight cutting
The knotting of silk has always beenimportant.We believe that DYSILK* has achieved specialknotting techniques through advances in braidingtechnology. It never becomes hard or difficult to handlebut ties down with a high degree of knot security.
DYSILK* DYNEK SUTURES AUSTRALIA
DYNEK SUTURES
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
REVERSE CUTTING
2
12mm 3/8 CIRCLE
4
16mm 3/8 CIRCLE
5
18mm 3/8 CIRCLE
6
24mm 3/8 CIRCLE
47
26mm 3/8 CIRCLE
7
28mm 3/8 CIRCLE
9
30mm 3/8 CIRCLE
31
35mm 3/8 CIRCLE
13
40mm 3/8 CIRCLE
10
45mm 3/8 CIRCLE
Ophthalmic /Plastic
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
45 S602 S502 S402
76 S1502*
45 S604 S504 S404 S304 S204
76 S1504 S1404 S1304 S1204*
45 S605 S505 S405 S305
76 S1505 S1405 S1305
45 S406 S306 S206
76 S1406* S1306 S1206
45 S3047* S2047
76 S13047* S12047*
45 S307* S207 S07*
76 S1307* S1207* S107*
45 S309* S209 S09 S29*
76 S1309* S1209 S109
45 S2031*
76 S13031*
76 S2013* S1113
50 S2010* S010*
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0 0 1 2
0.7 1 1.5 2 3 3.5 4 5
NEEDLE DESCRIPTION
DYSILK* BLACK BRAIDED TREATED SILK
DYNEK SUTURES
45 S4015
45 S4014 S3014*
45 S012
76 S1012* S1112
100 S3030* S2030 S030*
15
16mm 1/2 CIRCLE
14
18mm 1/2 CIRCLE
12
40mm 1/2 CIRCLE
30
60mm STRAIGHT
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
REVERSE CUTTING
Dental
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0 0 1 2
0.7 1 1.5 2 3 3.5 4 5
NEEDLE DESCRIPTION
DYSILK* BLACK BRAIDED TREATED SILK
18
22mm 1/2 CIRCLE
11
90mm 3/8 CIRCLE
CONVENTIONAL CUTTING
Dental
Sub-Cuticular
45 S3018 S2018*
76 S3011* S2011 S011* S111 S211*
DYNEK SUTURES
CONVENTIONAL CUTTING MULTIPACK
11
90mm 3/8 CIRCLE
50 S111ZMB* Sub-Cuticular
(2 sutures per pack)
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0
0.7 1 1.5 2 3
NEEDLE DESCRIPTION
DYSILK* BLACK BRAIDED TREATED SILK
Plastic45 S602D*
Plastic
OphthalmicSub-Cuticular
Ophthalmic
24
16mm 3/8 CIRCLE
45
45
45
S6024*
S5020*
S5024 S4024*
DS602D*
REVERSE PREMIUM CUTTING POINT
DYNEK SUTURES
S4020*
3
20mm 3/8 CIRCLE
8
26mm 3/8 CIRCLE
Plastic
Plastic
45 S303*
45 S208*
20
18mm 3/8 CIRCLE
45 S5049*
2D
11mm 3/8 CIRCLE
2D+2D
11mm 3/8 CIRCLE
49
13mm 3/8 CIRCLE
PlasticOphthalmic
25
16mm 3/8 CIRCLE
25+25
16mm 3/8 CIRCLE
26
20mm 3/8 CIRCLE
27
25mm 3/8 CIRCLE
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
A-CUTE* TAPER
Plastic
Plastic
Plastic
Plastic
35
18mm 1/2 CIRCLE
45 S6025* S5025* S4025*
45 DS4025*
45 S4026* S3026*
45 S5027* S4027*
76 S5035* S4035* S3035* S2035*
45 S4032Z* S3032Z
76 S3032* S2032*
76 S4063* S3063*
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0
0.7 1 1.5 2 3
NEEDLE DESCRIPTION
DYSILK* BLACK BRAIDED TREATED SILK
FINELINE* CUTTING
32
25mm 1/2 CIRCLE
63
18mm 3/8 CIRCLE
DentalGeneral/Intestinal
Dental
General/Intestinal
Dental
DYNEK SUTURES
ROUND BODIED TAPER •LENGTH
(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0 0 1
0.7 1 1.5 2 3 3.5 4
NEEDLE DESCRIPTION
DYSILK* BLACK BRAIDED TREATED SILK
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
76 S4064* S3064* S2064*
76 S5065* S4065* S3065* S2065*
76 S4068* S3068 S2068 S068*
76 S3069* S2069* S069* S169*
76 S2070* S070* S170
76 S197E5*
76 S5052* S4052*
76 S6053* S5053*
76 S5054* S4054* S3054*
76 S3072*
64
18mm 1/2 CIRCLE
65
20mm 1/2 CIRCLE
68
25mm 1/2 CIRCLE
69
30mm 1/2 CIRCLE
70
35mm 1/2 CIRCLE
97E5
40mm 1/2 CIRCLE
52
10mm 3/8 CIRCLE
53
13mm 3/8 CIRCLE
54
16mm 3/8 CIRCLE
72
30mm 3/8 CIRCLE
DYNEK SUTURESE5 - Heavy needle
68
25mm 1/2 CIRCLE
LENGTH(cm) SUGGESTED USE
DYSILK* BLACK BRAIDED TREATED SILK
* A minimum order quantity may apply to this product
45 S3068ZMH
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0
0.7 1 1.5 2 3
NEEDLE DESCRIPTION
ROUND BODIED TAPER•(8 strands per pack)MULTI PACK
General / Intestinal
Neurological
60 SA2024* SA024* SA524*
100 SA4040 SA3040* SA2040 SA040 SA140
150 SA260*
180 SA072* SA172*
250 SA20100*
5 x 60 SE4024* SE3024* SE2024 SE024* SE124*
12 x 60 SL4024*
13 x 60 SM4024* SM3024* SM2024* SM024* SM124*
2 x 76 SB2030* SB330*
5 x 76 SE130
12 x 76 SL2030
2 x 150 SB460*
STERILE LENGTHS - NON NEEDLE
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
METRIC
THREAD SIZE
USP4/0 3/0 2/0 0 1 2 3 5
1.5 2 3 3.5 4 5 6 7
DYSILK* BLACK BRAIDED TREATED SILK
Pre cutLengths
Pre cutLengths
Pre cutLengths
Pre cutLengths
Pre cutLengths
Pre cutLengths
Pre cutLengths
Pre cutLengths
Pre cutLengths
Pre cutLengths
DYNEK SUTURES
Pre cutLengths
Pre cutLengths
POLYESTERS DYNEK SUTURES AUSTRALIA
BRAIDED TREATED SUTURES
Braided polyesters have beenmanufactured to produce high tensilestrength with a uniform diameter.
DYFLEX* (green)This is a braided material whichhas been treated to allow asoftness and smoothness in thehandling properties of thesuture.
POLYFLEX* (black)This black braided materialhas been treated to enhanceits handling properties.
TEFLEX* (white)This is a white braided material whichhas been treated. It has been produced inthe white form to allow the Surgeonto use it as a subcutaneoussuture.
Knotting:As with all synthetic non-absorbable sutures, knottying requires the standard surgical technique of flatand square ties with additional throws as indicatedby surgical circumstance.
Reaction: minimal tissue reaction
DYNEK SUTURES
DYFLEX* GREEN BRAIDED TREATED POLYESTER
LENGTH(cm) SUGGESTED USE
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0 0 1 2
0.7 1 1.5 2 3 3.5 4 5
NEEDLE DESCRIPTION
REVERSE CUTTING
33+33
260mm STRAIGHT (2 x 2 per pack)
2
5
6
9
13
34
30
60mm STRAIGHT
25mm 1/2 CIRCLE
40mm 3/8 CIRCLE
30mm 3/8 CIRCLE
24mm 3/8 CIRCLE
18mm 3/8 CIRCLE
12mm 3/8 CIRCLE
45
45
45
76
76
100
68
76
Orthopaedic
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-CuticularP602S* P502S*
P405S*
P306S* P206S*
P109S*
P1113S*P2013S*
P1234S*
P2030S*P3030S*
DP033S*
DYNEK SUTURES
* A minimum order quantity may apply to this product
DYFLEX* GREEN BRAIDED TREATED POLYESTER
LENGTH(cm) SUGGESTED USE
METRIC
THREAD SIZE
USP 0 1 2
3.5 4 5
NEEDLE DESCRIPTION
REVERSE CUTTING17
35mm 1/2 CIRCLE
12
40mm 1/2 CIRCLE
76
76
P1017S*
P1112S Sub-Cuticular
Sub-Cuticular
REVERSE CUTTING ( LOOP SUTURE )
90 LOOP
60mm 1/2 CIRCLE
Plastic1 5 0 P290S LOOP*
* A minimum order quantity may apply to this product
DYNEK SUTURES
76 P4068S* P3068S* P068S*
76 DP2068S*
76 P069S* P169S*
76 P2070S P070S P170S* P270S*
60
16mm 1/2 CIRCLE CV 300
60+60
16mm 1/2 CIRCLE CV 300
64
18mm 1/2 CIRCLE CV 300
64+64
18mm 1/2 CIRCLE CV 300
65
20mm 1/2 CIRCLE CV 300
65+65
20mm 1/2 CIRCLE CV 300
68
25mm 1/2 CIRCLE CV 300
68+68
25mm 1/2 CIRCLE CV 300
69
30mm 1/2 CIRCLE
70
35mm 1/2 CIRCLE
ROUND BODIED TAPER •
DYFLEX* GREEN BRAIDED TREATED POLYESTER
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0 0 1 2
0.7 1 1.5 2 3 3.5 4 5
NEEDLE DESCRIPTION
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
Cardiovascular
General/Intestinal
General/Intestinal
DYNEK SUTURES
76 P4060S*
76 DP4060S*DP3060S*DP2060S*
76 P5064S* P4064S* P3064S
76 DP6064S*DP5064S*DP4064S*DP3064S*DP2064S*
76 P4065S* P3065S* P2065S*
76 DP4065S*DP3065S*DP2065S*
53
13mm 3/8 CIRCLE CV 300
54
16mm 3/8 CIRCLE CV 300
54+54
16mm 3/8 CIRCLE CV 300
98E5
48mm 1/2 CIRCLE
DYFLEX* GREEN BRAIDED TREATED POLYESTER
LENGTH(cm) SUGGESTED USE
ROUND BODIED TAPER •
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0 0 1 2 3
0.7 1 1.5 2 3 3.5 4 5 6
NEEDLE DESCRIPTION
Orthopaedic
Cardiovascular
Cardiovascular
Cardiovascular
76 P6053S*P5053S* P4053S*
76 P5054S* P4054S*
76 DP5054S*
76 P398SE5*
64+64 CV 300
18mm 1/2 CIRCLE
ROUND BODIED MULTI PACK •3 GREEN 3 WHITE WITH PLEDGETS (10 packs per box)
++ E3 -Pledget 3x3x1.5mm
90 DPT2065MFE++* Cardiovascular
90 DPT20645MFE++* Cardiovascular
68+68 CV 300
25mm 1/2 CIRCLE
* A minimum order quantity may apply to this product
DYNEK SUTURES
++ E4 -Pledget 3x6x1.5mmE5 -Heavy needle
LENGTH(cm) SUGGESTED
DYFLEX* GREEN BRAIDED TREATED POLYESTER
STERILE LENGTHS - NON NEEDLE
Pre cutLengths
Pre cutLengths
Pre cutLengths
Pre cutLengths
Pre cutLengths
Pre cutLengths
Pre cutLengths
Pre cutLengths
Pre cutLengths
300 PA40120SPA30120S*PA20120S*PA0120S* PA1120S*
3x45 PC218S
6x60 PF224S
METRIC
THREAD SIZE
USP5/0 4/0 3/0 2/0 0 1 2 5
1 1.5 2 3 3.5 4 5 7
NEEDLE DESCRIPTION
A-CUTE* TAPER
32+32
25mm 1/2 CIRCLE CV 300
35+35
18mm 1/2 CIRCLE CV 300
* A minimum order quantity may apply to this product
Cardiovascular
Cardiovascular
76 DP4032S*DP3032S*DP2032S*
90 DP032S*
76 DP5035S*DP4035S*DP3035S*
76 P583S*
83
55mm 1/2 CIRCLE
DYNEK SUTURES
1x76 PA530S
100 PA140S* PA240S
150 PA3060S*
180 PA272S*
200 PA3080S* PA080S*
250 PA30100S*
Obstetrics
* A minimum order quantity may apply to this product
LENGTH(cm) SUGGESTED USE
DYFLEX* GREEN BRAIDED TREATED POLYESTER
METRIC
THREAD SIZE
USP5/0 4/0 3/0 2/0
1 1.5 2 3
NEEDLE DESCRIPTION
A-CUTE TAPER* MULTI PACK3 GREEN 3 WHITE WITH PLEDGETS (10 packs per box)
32+32 CV 300
A-CUTE TAPER* SINGLE PACK1 GREEN WITH PLEDGETS (12 packs per box)
32 CV 300
35+35 CV 300
25mm 1/2 CIRCLE
18mm 1/2 CIRCLE
25mm 1/2 CIRCLE
35 CV 300
18mm 1/2 CIRCLE
A-CUTE* TAPER MULTI PACK5 GREEN 5 WHITE WITHOUT PLEDGETS (6 packs per box)
32+32 CV 300
A-CUTE* TAPER SINGLE PACK1 GREEN WITHOUT PLEDGETS (12 packs per box)
32 CV 300
35+35 CV 300
25mm 1/2 CIRCLE
18mm 1/2 CIRCLE
25mm 1/2 CIRCLE
35 CV 300
18mm 1/2 CIRCLE
90 GDPT2032SMFE++* Cardiovascular
90 GDPT2035SMFE++* Cardiovascular
90 DPT2032SMJ* Cardiovascular
90 DPT2035SMJ* Cardiovascular
90 GDP2032S++* Cardiovascular
90 GDP2035S++* Cardiovascular
76 P3032S* P2032S* Cardiovascular
76 P5035S* P4035S* P3035S* P2035S* Cardiovascular
++ E3 - Pledget + 3x3x1.5mm++ E4 - Pledget + 3x6x1.5mm
DYNEK SUTURES
25
16mm 3/8 CIRCLE
25+25
16mm 3/8 CIRCLE
TEFLEX* WHITE BRAIDED TREATED POLYESTER
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
METRIC
THREAD SIZE
USP5/0 4/0 3/0 2/0 0 1 2
1 1.5 2 3 3.5 4 5
NEEDLE DESCRIPTION
REVERSE CUTTING
FINELINE* CUTTING
5
18mm 3/8 CIRCLE
Plastic/
Plastic/
45 T505* T405*
45 T5025 T4025 T3025*
45 DT4025*
34
25mm 1/2 CIRCLE
76 T1234* Orthopaedic
Plastic/Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
DYNEK SUTURES
6
24mm 3/8 CIRCLE
7
28mm 3/8 CIRCLE
POLYFLEX* BLACK BRAIDED TREATED POLYESTER
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
METRIC
THREAD SIZE
USP5/0 4/0 3/0 2/0 0 1 2
1 1.5 2 3 3.5 4 5
NEEDLE DESCRIPTION
REVERSE CUTTING
FINELINE* CUTTING
Sub-Cuticular
Sub-Cuticular
Orthopaedic
Plastic
Plastic
Plastic
25
16mm 3/8 CIRCLE
26
20mm 3/8 CIRCLE
27
25mm 3/8 CIRCLE
76 P1306*
45 P307*
45 P5025*
45 P5026*
45 P4027* P3027*
34
25mm 1/2 CIRCLE
76 P1234*
DYNEK SUTURES
POLYFLEX* BLACK BRAIDED TREATED POLYESTER
LENGTH(cm) SUGGESTED USE
METRIC
THREAD SIZE
USP5/0 4/0 3/0 2/0 0 1 2
1 1.5 2 3 3.5 4 5
NEEDLE DESCRIPTION
General/Intestinal
General/Intestinal
General/Intestinal
ROUND BODIED TAPER •76 P4054*
76 P169*
STERILE LENGTHS - NON NEEDLE
* A minimum order quantity may apply to this product
Pre cutLengths 13x60 PM3024
54
16mm 3/8 CIRCLE
76 P170*
DYNEK SUTURES
69
30mm 1/2 CIRCLE
70
35mm 3/8 CIRCLE
SURGICAL GUT
Dynek catgut is to our bestknowledge BSE FREE andproduced from bovine intestinalserosa. As an accredited AQISlaboratory, Dynek can onlyimport raw materials that are freefrom contamination.
Dynek CHROMIC gut ischromicised before it is spun intostrands. This allows control overthe amount of chromic contentfor an even absorption rate.
The specialised spinning andgrinding process creates a strandof uniform diameter. The suturestrand is then further polished toachieve maximum smoothness,for reliability and strength.
There are many sensible reasons forchoosing “DYNEK CATGUT”, but themost important can easily beoverlooked: the sheer pleasure ofworking with a Natural Fibre.
The selection of Plainand ChromicSurgical Gut isdetermined by therate of healingrequired in the tissuein which the suture isto be used.
As this graph displays, when compared with other brands,Dynek catgut is superior.
DYNEK SUTURES
4/0 3/0 2/0 0 1 2
DYNEK CATGUT
1
2
3
4
0
THREAD SIZE (USP)
5
6
OTHER STANDARD
DYNEK SUPER GUT – NATURALLY
NOTE: Tensile strength is determined as per the standard knot pull test stated in the United States Pharmacopoeia, Vol 23- NF18, for absorbable sutures utilising a surgeon’s knot.
TENSILE STRENGTH(KGF)
SURGICAL GUT CHROMIC & PLAIN
CHROMIC SURGICAL GUT
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
METRIC
THREAD SIZE
USP5/0 4/0 3/0 2/0
1.5 2 3 3.5
NEEDLE DESCRIPTION
REVERSE CUTTING2
12mm 3/8 CIRCLE
40
13mm 3/8 CIRCLE
4
16mm 3/8 CIRCLE
5
18mm 3/8 CIRCLE
6
24mm 3/8 CIRCLE
47
26mm 3/8 CIRCLE
9
30mm 3/8 CIRCLE
15
16mm 1/2 CIRCLE
34
35mm 1/2 CIRCLE
Sub-Cuticular
Dental
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Obstetrics &Gynaecology
Sub-Cuticular
50 CG502
50 CG5040
50 CG404 CG304
50 CG405 CG305
76 CG1405 CG1305
50 CG306 CG206
76 CG1306
50 CG2047*
50 CG209*
76 CG1209*
50 CG4015
76 CG12034
DentalOral Surgery
Dental/Sub-Cuticular/Oral Surgery
DYNEK SUTURES
CHROMIC SURGICAL GUT
LENGTH(cm) SUGGESTED USE
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0 0 1 2
1 1.5 2 3 3.5 4 5 6
NEEDLE DESCRIPTION
17
45
12
35mm 1/2 CIRCLE
40mm 1/2 CIRCLE
48mm 1/2 CIRCLE
76
100
76
50
CG3017*CG2017*
CG1117*
Obstetrics &Gynaecology
Obstetrics &GynaecologyCG1012* CG1112*
CG045*
REVERSE CUTTING
Obstetrics &Gynaecology
REVERSE PREMIUM CUTTING POINT
24
16mm 3/8 CIRCLE
20
18mm 3/8 CIRCLE
50 CG6024 CG5024
50 CG4020*
2D
11mm 3/8 CIRCLE
Plastic
Plastic
50 CG602D CG502D* Plastic/ENT
* A minimum order quantity may apply to this product
DYNEK SUTURES
CHROMIC SURGICAL GUT
LENGTH(cm) SUGGESTED USE
METRIC
THREAD SIZE
USP5/0 4/0 3/0 2/0 0 1 2
1.5 2 3 3.5 4 5 6
NEEDLE DESCRIPTION
STERILE LENGTHS - NON NEEDLE
150 CGA3060CGA2060 CGA060 CGA160 CGA260Pre cutLengths
64
18mm 1/2 CIRCLE
65
20mm 1/2 CIRCLE
68
25mm 1/2 CIRCLE
68+68
25mm 1/2 CIRCLE
69
30mm 1/2 CIRCLE
70
35mm 1/2 CIRCLE
* A minimum order quantity may apply to this product
ROUND BODIED TAPER •
76 CG4064* CG3064*
76 CG4065 CG3065 CG2065*
76 CG5068* CG4068* CG3068 CG2068 CG068
76 DCG3068*
76 CG3069* CG2069* CG069* CG169
76 CG3070* CG2070 CG070 CG170
100 CG12070* CG1070* CG1170*
Urological
General/Intestinal
General/Intestinal
General/Intestinal
General/Intestinal
General/Intestinal
DYNEK SUTURES
70+17
DCG2070E1*150 Obstetrics &Gynaecology
CHROMIC SURGICAL GUT
LENGTH(cm) SUGGESTED USE
* A minimum order quantity may apply to this product
42
35mm 1/2 CIRCLE
44
45mm 1/2 CIRCLE
Obstetrics &Gynaecology
General/Intestinal
Obstetrics &Gynaecology
General/Intestinal
ROUND BODIED TAPER •General/Intestinal
General/Intestinal
67
25mm 3/8 CIRCLE
54
16mm 3/8 CIRCLE
CG4054*
CG3067* CG2067*
ROUND BODIED TAPER (HEAVY)•
76
76
35mm 1/2 CIRCLE
40mm 1/2 CIRCLE
48mm 1/2 CIRCLE
65mm 1/2 CIRCLE
76mm 1/2 CIRCLE
70E5
97E5
98E5
85
86
Obstetrics &Gynaecology
General/Intestinal
General/Intestinal
Obstetrics &Gynaecology
Obstetrics &Gynaecology
4/0 3/0 2/0
METRIC
THREAD SIZE
USPNEEDLE DESCRIPTION
0 1 2
2 3 3.5 4 5 6
CG170E5*
CG2097E5* CG097E5*CG197E5*CG297E5*
CG1097E5*CG1197E5*CG1297E5*
CG098E5*CG198E5*CG298E5*
CG1198E5* CG1298E5*
CG2085*
CG2086* CG086*
CG2042*
CG144* CG244*
76
76
100
76
100
76
76
A-CUTE* TAPER
DYNEK SUTURES
76
76
50 PG502
50 PG504 PG404 PG304
76 PG1404
50 PG405 PG305
76 PG1405* PG1305
50 PG306 PG206
76 PG1206
76 PG1112*
100 PG3030* PG2030*
2D
11mm 3/8 CIRCLE
2
12mm 3/8 CIRCLE
4
16mm 3/8 CIRCLE
5
18mm 3/8 CIRCLE
6
24mm 3/8 CIRCLE
12
40mm 1/2 CIRCLE
30
60mm STRAIGHT
PLAIN SURGICAL GUT
METRIC
THREAD SIZE
USP6/0 5/0 4/0 3/0 2/0 0 1
1 1.5 2 3 3.5 4 5
NEEDLE DESCRIPTION
LENGTH(cm) SUGGESTED USE
REVERSE CUTTING
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
Sub-Cuticular
General/Intestinal
Sub-Cuticular
50 PG602D PG502D* Plastic/ENT
24
16mm 3/8 CIRCLE
50 PG4024 Plastic
REVERSE PREMIUM CUTTING POINT
* A minimum order quantity may apply to this product
A-CUTE* TAPER
32
25mm 1/2 CIRCLE
50 PG3032Z General/Dental
General/Intestinal
DYNEK SUTURES
76 PG4065 PG3065 PG2065*
76 PG3068 PG2068 PG068*
76 PG3069* PG2069* PG069* PG169*
76 PG2070 PG070* PG170*
76 PG2097E5 PG097E5*
76 PG2098E5 PG198E5*
100 PG1198E5* PG1298E5*
76 PG2086* PG086*
PLAIN SURGICAL GUT
LENGTH(cm) SUGGESTED USE
STERILE LENGTHS - NON NEEDLE
* A minimum order quantity may apply to this product
METRIC
THREAD SIZE
USP4/0 3/0 2/0 0 1 2
2 3 3.5 4 5 6
NEEDLE DESCRIPTION
ROUND BODIED TAPER •
150 PGA4060* PGA3060* PGA2060 PGA060* PGA160* PGA260*Pre cutLengths
65
20mm 1/2 CIRCLE
68
25mm 1/2 CIRCLE
69
30mm 1/2 CIRCLE
70
35mm 1/2 CIRCLE
97E5
40mm 1/2 CIRCLE
98E5
48mm 1/2 CIRCLE
86
76mm 1/2 CIRCLE
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
General /Intestinal
PG2097E5*PG097E5*76
76 PG4054*
54
16mm 3/8 CIRCLE
DYNEK SUTURES
General /Intestinal
BIOVEK* DYNEK SUTURES AUSTRALIA
BIOVEK*
Dynek’s braided synthetic absorbable suture thatdelivers the ease-of-use surgeons expect from abraided suture. Biovek* a coated polyglycolidesuture is available in a dyed and undyed threadand maintains 70% of its tensile strength in situfor 14 days.The Proprietary coating formulationused on Biovek* sutures minimises tissue reaction.
Tensile Strength Retention
70% at 14 days
50% at 21 days
Less than 10% at 28 days
Generic Formulation
Polyglycolide with a coating of
Polycaprolactone + Calcium Stearate
Method of Absorption
Hydrolysis
Sterilisation Method
Ethylene Oxide (ETO)
Colours
Dyed(violet) and undyed(beige)
FDA-approved colour additives D&C Violet
No. 2 are used
USP Sizes
5 - 7/0 on a comprehensive range of needlesizes and types and as pre-cut lengths,
7/0 - 10/0 on microsurgery needles
RequirementsMeets all United States Pharmacopoeia (USP)and European Pharmacopoeia (EP) requirementsfor synthetic absorbable surgical sutures, exceptdiameter which meets EP requirements only.
DYNEK SUTURES
BIOVEK* MULTIFILAMENT COATED SYNTHETIC ABSORBABLE
LENGTH(cm) SUGGESTED USE
METRIC
THREAD SIZE
USPNEEDLE DESCRIPTION
2D
4911mm 3/8 CIRCLE
13mm 3/8 CIRCLE
45
45
REVERSE PREMIUM CUTTING POINT
NAB602DCClear
NAB5049CClear
5
618mm 3/8 CIRCLE
24mm 3/8 CIRCLE
76
76 NAB1405CClear
NAB1505CClear
REVERSE CUTTING
NAB1406CClear
NAB1305CClear
NAB1306CClear
NAB1206CClear
4/0 3/0 2/0 0
2 3 3.5
6/0
1
5/0
1.5
* A minimum order quantity may apply to this product
DYNEK SUTURES
NAB30545
ROUND BODIED TAPER (HEAVY)•
35mm 1/2 CIRCLE
70E5
NAB170E576
* E5 - Heavy needle
0.7
Plastic /Sub-cuticular
Plastic /Sub-cuticular
Skin /Sub-cuticular
Skin /Sub-cuticular
General /Intestinal
MONOFILAMENT STAINLESS STEEL WIRE
DYCROM * DYNEK SUTURES AUSTRALIA
DYCROM* is available as a precut length oron a wide range of needles to meet the varyingsurgical requirements.
• Reverse cutting needle
• Straight Cutting needle
• Fineline* conventional cutting needle
• Round Bodied Taper needle
• A-Cute Taper needle
• Blunt Point needle
DYCROM* can be used in cardiovascular surgery(sternal closure), abdominal wound closure,hernia repair, intestinal anastomosis, and specificorthopedic procedures such as tendon repair.
DYCROM* is a non-absorbablemonofilament stainless steel suture.
DYCROM* is ductile and pliable. Ithas excellent handling properties andis exceptional in penetrating hardtissues.
DYCROM* stainless steel is the mostinert of all Dynek suture materials andprovides permanent and maximumtensile strength. Due its adequatesupport and compatibility with tissue,a minimal acute inflammatory reactionis observed.
Reaction: minimal tissue reaction
DYNEK SUTURES
DYNEK SUTURES
* A minimum order quantity may apply to this product
LENGTH(cm) SUGGESTED USE
DYCROM* MONOFILAMENT STAINLESS STEEL WIRE
METRIC
THREAD SIZE
USPNEEDLE DESCRIPTION
CONVENTIONAL CUTTING MULTI PACK(4 Sutures Per Pack)
48mm 1/2 Circle
4 X 45 SternumGSS550MDE5 GSS650MDE5
50E5
7
5 6
8
7
9
E5 - Heavy profileAlso available in single packs
DermalocDermaloc skin closures are porous to allow for improved healing, the rounded ends resist lifting and curling.
Developed and manufactured in Austraila, this skin tone medical grade material is hypoallergenic, minimisingthe possibility of patient reaction.
Using a high tack acrylic adhesive, Dermaloc skin closures ensure a secure wound closure.
Dermaloc skin closures can be used as the primary wound closure or in larger wounds in conjunction withsutures.
The earlier removal of skin sutures and the use of Dermaloc skin closures to support the incision duringthe natural healing process will minimise scarring.
The 3 sizes will give the surgeon a choice appropriate for the incision.
Dermaloc strips are sterilised by gamma irradiation in a peel pouch for easy opening onto the sterile field.
Dynek provide a unique range of products for Dermatology and Plastic Surgery including:
* Radene, a yellow PVDF suture ideal when increased contrast is required.
* The Dyloc Biopsy Suture with improved handling characteristics.
* The Dynek Premium Cutting Point range of needles.
Radene Sutures
Dyloc Biopsy Suture
Dermaloc SkinClosures
®
Code Description
5375 3mm x 75mm - 5 strips per packet
6638 6mm x 38mm - 6 strips per packet
3675 6mm x 75mm - 3 strips per packet
Disposable Sterile SutureInsertion KitQuality, cost effective, ready to use kits for the insertion of sutures. Iteliminates the reprocessing of contaminated instruments, cost of kitpreparation and inventory lines from your practice thereby increasingthe effectiveness of your staff.
Code: 061PM02002
Contains:
1 x 3 compartment tray
1 x Sterile field 60cm x 60cm
5 x Woven gauze swabs with X-ray detectable line 7.5cm x 7.5cm
2 x Dressing towels
1 x Fenestrated drape
1 x Stainless steel suture scissors
1 x Stainless steel toothed forceps
1 x Stainless steel Mayo needle holder
1 x Plastic forceps 15cm
Suture Training KitIn response to frequent requests from participants in the manytraining activities sponsored by Dynek, we have developed thestudent Suturing Training Kit.
Complete with everything needed to practise suturing techniques,the kit is realistically priced, and is supported by a replenishmentsystem to enable additional sutures to be purchased.
Please note:- the kit is for training use only, and not approved for use in patientprocedures.
The training kit can be purchased direct from the Dynek Business Service Centre on1800 088 172 (or email).
Code: STKA
1 x Molefoam suturing medium
3 x Sutures
1 x Scalpel blade
1 x Scalpel blade holder
1 x Needle holder
1 x Scissors
1 x Tissue forceps
1 x Dynek pen
1 x Presentation/storage box
Contains: