MASTER CATALOG - U.S. Armor | Custom Fit Body Armor · 2020. 2. 20. · nij stab standard - 0115.00 threat level test bullet bullet wt. e.c.v.* new armor velocity max bfs iia 9mm

Y O U ’ L L W E A R I T . TM

M A S T E R C A T A L O GQ U A L I T Y | C O M F O R T | V A L U E

S T E P H E N A R M E L L I N OP R E S I D E N T, C E O

Y O U ’ L L W E A R I T !“ ”

THANK YOU FOR YOUR SERV ICE . For more than 30 years, we at U.S. Armor have had the honor

o f out f i t t ing the law en forcement and mi l i t ar y communi t ies w i th super ior body armor and

protect i ve equ ipment. As f ormer ser v icemen, o f f i cers or f ami l y members o f both , mysel f and

our ded icated team members take incred ib le pr ide and care in the des ign and const ruct ion o f

our armor and protect i ve equ ipment. We are thank f u l f or the oppor tun i t y to suppor t you in

ser v ing us a l l.

As you k now, your armor is on l y e f f ec t i ve i f i t ’s worn and therefore, we have commit ted

oursel ves to produc ing the l ightest, sa fest, and most dynamic armor. I t i s w i th your comfor t

and per formance needs in mind that we select the most innovat ive, respected mater ia l suppl iers

and par tners and seek to advance our o f f er ings as app l i cab le. Whi le we so lemnly ensure that

our products are compl iant w i th a l l app l i cab le standards and requ i rements, our pr imar y

object i ve is to protect and suppor t you, so you can f ocus on e f f ec t i ve l y do ing your job.

We thank you f or your t rust in us and in return , we promise to del i ver super ior body armor

that you ’ l l comfor tab l y wear.

S incerel y,

- STEPHEN ARMELL INO

U.S. ARMOR has provided superior body armor and protective products for more than three decades. Our legacy dates back to Richard Armellino, Sr., father of current U.S. Armor president Stephen Armellino.

Richard founded one of the first body armorcompanies in America, American Body Armor (ABA), back in 1969. Richard, or Dick as his friends called him, was a decorated WWII and Korean War pilot who needed to wear heavy flak jackets to stay safe during his missions. Dick had a knack for innovation and a zeal for protecting those who put their lives in danger. Through years of research and development, Dick pioneered the very first patents and designs for what is commonly referred to today as “body ar-mor.” Stephen picked up where his father’s legacy left off by establishing U.S. Armor Corporation in 1986.

He has taken his father’s designs into the 21st century with U.S. Armor’s breakthrough material blends and unmatched product quality. Now, many decades later, U.S. Armor products have gone on to save the lives of hundreds of countless law enforcement personnel.

At U.S. Armor, we take great pride in knowingthat our products not only positively affect the lives of the officers who wear them, but also those of their loved ones when they return home safely after a life-threatening incident occurs on the job.

A HISTORYTO PROTECT

O V E R 3 0 Y E A R S I N B U S I N E S S M A D E I N T H E U S A5 Y E A R W A R R A N T Y5

Driven by our years of dedication to protect those who protect us all, U.S. Armor continues to establish itself as a body armor manufacturer committed to consistentlyinnovating and improving the quality and performance of its products and internal processes with the goal of earning the customer’s trust. We believe providing comfort, long standing experience and MADE IN THE USA quality products are the attributes that have allowed U.S. Armor to be the most trusted name in body armor for decades.

U.S. Armor is an ISO 9001 and ISO 14001 certified manufacturer for environmental, quality control processes and procedures, specifically within the body armor industry.

COMMITMENTTO EXCELLENCE

6U S A R M O R . C O MC A L L U S T O D A Y 8 0 0 . 4 4 3 . 9 7 9 8

Prior to any U.S. Armor product being released,extensive testing is conducted inside our test facility to ensure our ballistic products surpass the National Institute of Justices compliance testing program requirements. All of our testing follows the latestNIJ requirements. We also conduct quality assurance testing of used ballistic vests, special threat testing, field training program for customers and our field reps, shooting demonstrations, and quality control testing ofballistic materials.

BALL IST IC TEST RANGE

NIJ BALL IST IC STANDARD - 0101.06

NIJ STAB STANDARD - 0115.00

THREAT LEVEL TEST BULLET BULLET WT. E.C.V.* NEW ARMOR VELOCITY MAX BFS

I IA 9MM FMJ RN40 S&W FMJ

124 GR.180 GR.

11651065

12251155 44

I I 9MM FMJ RN357 MAG JSP

124 GR.158 GR.

12451340

13051430 44

I I IA .357 S IG FMJ FN44 MAG JSP

125 GR.240 GR.

14101340

14701430 44

I I I 7 .62MM NATO FMJ 147 GR. 2780 2780 44

IV .30 CAL. M2 AP 166 GR. 2880 2880 44

PROTECTION LEVEL E1 STRIKE ENERGY MAX PEN AT E1 (IN.) E2 OVERTEST STRIKE ENERGY (J) MAX PEN AT E2 (IN.)

1 24 7MM 36 20MM

2 33 7MM 50 20MM

3 43 7MM 65 20MM


We have partnered with the best ballistic material suppliers in the industry to ensure that every new U.S. Armor vest design delivers lighter, thinner, cooler and more flexible body armor for ultimate comfort without sacrificing ballistic protection. As statistics state, an officer who does not wear body armor is 14 times more likely to be fatally injured than one who does. We are proud to know that no officer has ever been fatally injured by a round while wearing a U.S. Armor vest (certified for that round of ammunition). This significant success has only been achieved by scrupulously using material that has proven not to fail.

H IGHPERFORMANCEPARTNERSHIPS

P U R C H A S I N G C O N T R A C T S—DHS/USBP | NASPO | GSA | New York State

8U S A R M O R . C O MC A L L U S T O D A Y 8 0 0 . 4 4 3 . 9 7 9 8

OUTL AST ® FABRICTECHNOLOGY—Outlast® technology, originally developed for NASA, utilizes phase-change materials (PCM) that absorb, store and release heat for optimal thermal comfort. Outlast® technology is the only phase-change material that carries the Certified Space Technology™ seal of approval.

• Thermocules™ can be incorporated into fabrics and fibers and have the capacity to absorb, store and release excess heat

• Thermocules™ pro-actively manages heat while controlling the production of moisture before it begins

• As the skin gets hot, the heat is absorbed, and as it cools, that heat is released

• Thermocules™ regulates the skin’s microclimate

COPPER CUTEC TM

TECHNOLOGY—Copper is an essential nutrient in all plants andanimals. The CuTEC™ technological breakthroughis based on utilizing the unique qualities of copper(elemental # 29) by permanently binding its proprietary copper compound to the textile fiber on the body-side of armor carriers. This life-giving element refreshes skin texture and wellness, improves hygiene andeliminates odor-causing bacteria, fungus and microbes.

IMPACTFUL ELEMENTS OF COPPER ION TECHNOLOGY ARE:

• Odor control (caused by bacteria, fungus and microbes)

• Improved hygiene• Healthier skin texture, skin tone and skin

wellness


A vest cannot save a life unless it is worn. Recent surveys show that the number one reason officers choose not to wear their body armor is poor fit and discomfort. Recognizing this behavior, U.S. Armor has pledged to produce the most comfortable fit possible in our vests to assure officers will wear them, be fully protected by a quality product in the line of duty, and experience a decreased level of fatigue and an increased level of comfort on the job.

U.S. Armor is the comfort leader in the body armor industry because our vests are custom-fitted and tailor-made to your frame. We use a unique custom-fit measuring system that incorporates nine different measurement points for males and 12 differentmeasurement points for females to ensure thatyour ballistic vest fits right, every time.

SUPERIOR F IT

WE EXCEED INDUSTRY STANDARDS BY OFFERING:

GET A BET TER F I T WITH U.S . ARMOR

— Ballistic material cut down to 1/2 inch increments

— 9 points of custom measurement for male officers and 12 points of custom measurement for female officers

— A 60-day custom fit guarantee

1 0U S A R M O R . C O MC A L L U S T O D A Y 8 0 0 . 4 4 3 . 9 7 9 8

FEMALE BALL IST IC VESTS—U.S. Armor’s unique female ballistic vest design is unmatched in the industry. Offering a superior female contoured fit for unparalleled comfort, our female vests acknowledge that one size does not fit all and provides an exceptional solution.

Our female vest is not just a smaller male panel or a fold-over ‘princess cut’; but rather tailored to the contours of the wearer. U.S. Armor’s female vests are designed to account for 12 different measurements and cup size. The bust area of our female body armor has been shaped by a unique process which eliminates cutting of the front ballistic panel. This exclusive process enhances comfort and concealability without sacrificing ballistic performance.

OUR FEMALE BALL IST IC VESTS INCLUDE :

• Actual bust cups formed into the armor itself through a darting procedure to properly accommodate the variances in female body shape and contour

• 12-point, tailor-made female measuring and sizing procedure; both bust and cup size are factored into the sizing matrix in creating your ballistic panels.

Q U A L I T Y

C O M F O R T

V A L U E

CATALOG OF EQUIPMENT

BALLISTIC MODELS

CONCEALABLE VEST CARRIERS

EXTERNAL CARRIERS & VESTS

TACTICAL CARRIERS & VESTS

CORRECTIONS CARRIERS & VESTS

RIFLE PLATES & TRAUMA PLATES

S P E C I A L T Y G E A R & A C C E S S O R I E S

BALLISTIC SHIELDS & BLANKETS

HELMETS

K-9 VESTS

POUCHES

ID PATCHES

CARRY BAGS

WARRANTIES

. . . . . .13

. . . . . .16

. . . . . .22

. . . . . .34

. . . . . .50

. . . . . .56

. . . . . .67

. . . . . .77

. . . . . .81

. . . . . .83

. . . . . .87

. . . . . .87

. . . . . .90

O V E R 3 0 Y E A R S I N B U S I N E S S M A D E I N T H E U S A5 Y E A R W A R R A N T Y1 3

B A L L I S T I C P A C K A G E S

ENFORCER

E N F O R C E R XPBALLIST IC THREAT LEVEL I I AND I I IA

E N F O R C E R XLTNIJ 0101.05 CERT IF IED

N I J 0 1 0 1 . 0 6 C E R T I F I E D – M A L E / F E M A L E V E S T S

A force to be reckoned with, the Enforcer Ballistic Vests leverage the most innovative ballistic materials available further enhanced by advanced design. Proven to perform without sacrificing mobility and comfort, the Enforcer Vests over delivers on its promise to protect.

Kevlar® XP™ is a new woven fabric from DuPontTM’s family ofperformance aramids. Kevlar® XP™ has been completely redesigned for today’s modern threats. One of the key improvements to this fabric

The Enforcer XLT was originally developed for the U.S. BorderPatrol who required Threat Level IIIA armor that still enabledthem to perform their duties while working long hours in extremeheat. Finally, you don’t have to sacrifice comfort for dependableprotection with enhanced heat management.

Comfort is the difference. Kevlar® Comfort XLT™ is a provenballistic technology from DuPontTM. The state-of-the-art weave and spinning technique allows this version of Kevlar® to be more comfortable, flexible and lighter yet still deliver the same ballistic performance and stopping power as previous, heavier blends of DuPontTM Kevlar®.

is its ability to reduce the back face deformation by 15% or more when compared to other ballistic materials.

MODEL BALLISTIC LEVEL AREAL DENSITY THINNESS V50 9MM V50 357 MAG V50 357 SIG V50 44 MAG

1316 I I I A 1.15 .27 IN — — 1768 FPS 1646 FPS

1216 I I .85 .22 IN 1604 FPS 1630 FPS — —

MODEL BALLISTIC LEVEL AREAL DENSITY THINNESS

XLT2A I I A .64 .11 IN

XLT2AF I I A .64 .11 IN

XLT2 I I .83 .15 IN

XLT2F I I .83 .15 IN

XLT3A I I I A 1.01 .18 IN

XLT3A-01F I I I A 1.01 .18 IN


E N F O R C E R 6000BALLIST IC THREAT LEVEL I I AND I I IA

E N F O R C E R 5000BALLIST IC THREAT LEVEL I I AND I I IA

E N F O R C E R 3000BALLIST IC THREAT LEVEL I I IA

The Enforcer 6000 is an advanced technological design combining Honeywell’s proven Gold Shield®, advanced Spectra Shield® II, DSM ballistic material and Core technology material from TexTech. The end result is a lighter, more flexible vest that still satisfies the strict performance requirements of the NIJ 0101.06 Standard.

The Enforcer 5000 is an advanced technological design combining Honeywell’s proven Gold Flex®, new Spectra Shield® II ballistic material and DuPontTM’s Kevlar® XP™: the end result is a lighter, more flexible vest that still satisfies the strict performance requirements of the NIJ 0101.06 Standard.

The Enforcer 3000 is a budget friendly design combiningHoneywell’s proven Gold Shield®, Honeywell’s Spectra, and woven

DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

The Enforcer 6000 Female model has comfortable bust cups achieved through advanced cutting and stitching, providing a much more natural, comfortable and supporting fit for female officers.

The Enforcer 5000 Female model has actual formed bustcups achieved through darting, providing a much more natural, comfortable and supportive fit for female officers.

Twaron fiber by SAATI. The end result is a lighter, more flexible vest.


6316M I I I A .99 .26 IN — — 1781 FPS 1658 FPS

6326F I I IA 1.03 .26 IN — — 1883 FPS 1671 FPS

6216M I I .72 .17 IN 1932 FPS 1807 FPS — —


5316A I I I A 1.11 .24 IN — — 1809 FPS 1688 FPS

5216 I I .85 .19 IN 1761 FPS 1617 FPS — —

5226 I I .85 .19 IN 1798 FPS 1695 FPS — —


3316 I I I A 1.32 .32 IN — — 1818 FPS 1578 FPS



C A R R I E R S

CONCEAL ABLEA ballistic vest can only save a life if it is worn. We strive to makethe most comfortable, custom-fit vest on the market. Our concealable carriers are constructed using a combination of the most flexible and technologically advanced materials, which provides maximum comfort for the wearer, along with moisture removal. When you combine our Outlast® or Copper CuTECTM Technology into your concealable carrier, you have a complete system that makes your vest wearable even in the harshest of conditions.

C O L O R O P T I O N S A V A I L A B L E :

Custom colors and camouflage patterns available (additional fee may apply).

BLACK

GREY

WHITE

BROWN

NAV Y TAN OD GREEN


C O N C E A L A B L E V E S T C A R R I E R S

ACS


ACS - EXP

The removable ACS machine washable carrier is constructed of anti-microbial, closed-hole mesh fabric with built-in, two-way stretch on the exterior half of the carrier and Wickaway moisture-wicking mesh on body side to allow for air flow and evaporation. Enhanced with Comfort Curve ventilated shoulder straps using Breath-O-Prene, this carrier offers reduced heat build up and ultimate comfort.

S T A N D A R D F E A T U R E S

• Easy VELCRO® ballistic panel and trauma plate access• Shirt tails• Comfort-Curve Shoulder Straps with Breath-O-Prene• Available with Outlast® or Copper CuTECTM Technology

The removable ACS-EXP machine washable carrier isconstructed of anti-microbial, closed-hole mesh fabric with built in two way stretch on the exterior half of the carrier and Wikaway moisture-wicking mesh on body side to allow for air flow and evaporation. The carrier is removable from theballistic panels for laundering.


• Easy VELCRO® ballistic panel and trauma plate access• Shirt tails• Comfort-Curve Shoulder Straps with Breath-O-Prene• External 6” x 8” plate pouch• Optional external rear 6” x 8” plate pocket• Available with Outlast® or Copper CuTECTM Technology

R E A R V I E W

R E A R V I E W


Constructed of Poly/Cotton Ripstop with Comfort Curveshoulder straps, which conform to the natural shouldershape for optimal comfort. On the body side there is Wikaway moisture-wicking mesh to allow for airflow between the carrier and the wearer, decreasing heat stress and increasing comfort.


• Easy VELCRO® balistic panel and trauma plate access• Shirt tails• Comfort-Curve Shoulder Straps with Breath-O-Prene• Available with Outlast® or Copper CuTECTM Technology

C O N C E A L A B L E V E S T C A R R I E R S |


HVC

R E A R V I E W

Shown with padded shoulders and elastic waist straps



T-SHIRT CARRIER

Designed to be worn under a shirt or jacket, the T-Shirt Carrier provides maximum concealment of your ballistic panels, giving the wearer essential protection and discretion.

Standard colors are black or white(Custom colors available and may be subject to additional charges)


• Front and back pouch for easy ballistic panel insertion and removal

• Front and back truama plate pouch• Zippered at sides for ease of donning or doffing• Accepts standard style and size ballistic panels• Available in standard t-sizes S, M, L, XL, 2XL; panel size

adjusted accordingly



POLY COT TON


TRADIT IONAL POLY COT TON

Using Poly/Cotton exterior material and Wikaway material on the interior, this easy-wear carrier actively shields the wearer fromexcessive moisture. Built with removable/replaceable, 2” polyester, elastic webbing straps, this carrier ensures long-term comfort.


• Easy VELCRO® balistic panel and trauma plate access• Shirt tails• 6” x 8” internal trauma plate pocket• Available with Outlast® or Copper CuTECTM Technology

Using Poly/Cotton exterior material and Wikaway material on the interior, this easy-wear carrier actively shields the wearer from excessive moisture. Built with non-removable elastic webbing straps, this carrier provides a secure fit and comfort.


• Easy VELCRO® balistic panel and trauma plate access• Shirt tails• Available with Outlast® or Copper CuTECTM Technology

R E A R V I E W

R E A R V I E W




C A R R I E R S & V E S T S

EX TERNALAvailable to suit the needs of the individual, our external vest carriers offer extensive features and meticulous construction for comfort and mobility. Each carrier is designed to fit your existing or new concealable ballistic panels.

Customization available upon request; fees may apply and delivery times may be extended

dependent upon modifications requested.

For an additional charge, U.S. Armor carriers can be sized to fit your non U.S. Armor

panels with provided measurements and tracings. Our 60-day fit guarantee is not

applicable to these carriers.


Designed for the officer’s comfort by getting their bodyarmor off of their body for increased air circulation and heat management, yet still presents a professional appearance. The Uniform Shirt Carrier blends in smartly with your current uniform shirt complete with name tag, badge holder, shoulder

epaulets, pockets and buttons and is almost indistinguishable from your standard uniform shirt, even at close distances.

Our Uniform Shirt Carriers are compatible with all of U.S. Armor’s ballistic packages.

E X T E R N A L V E S T C A R R I E R S

UNIFORM SHIRT CARRIERS



BL ACK WHITE LAPDBLUE

TAN CHICAGOBLUE

GREEN BRIGHTBLUE

NAV Y


U N I F O R M S H I R T C A R R I E R

USC 3400

U N I F O R M S H I R T C A R R I E R

USC 3410


• Two upper pockets • 3400 standard pocket flaps

• 3401 scalloped pocket flaps

• Badge and name tag grommets• Three elastic side straps• Five sewn-in military pleats

O P T I O N A L

• Mic tab• VELCRO® loop or sewn-down option for nylon name tags or

embroidered badge• Sewn-on suspenders


• Two upper pockets • 3410 standard pocket flaps


• Badge and name tag grommets• Non-removable epaulets• Three elastic side straps• Pleated pockets• Two lower slit pockets• Five sewn-in military creases

O P T I O N A L

• Mic tab• VELCRO® loop or sewn-down option for nylon name tags or

embroidered badge• Sewn-on suspenders

R E A R V I E W

M O D E L 3 4 0 0 S H O W N

M O D E L 3 4 1 0 S H O W N

R E A R V I E W

E X T E R N A L V E S T C A R R I E R S |


R E A R V I E W

M O D E L 4 4 1 0 S H O W N

M O D E L 4 4 0 1 S H O W N

R E A R V I E W

U N I F O R M S H I R T C A R R I E R S

USC 4400


USC 4410


• Non-adjustable shoulders• Two upper pockets

• 4400 standard pocket flaps


• Adjustable side closures• Badge grommets• Name tag grommets• Adjustable epaulets• Mic tab• Two handcuff pouches• Belt keepers

O P T I O N A L

• VELCRO® loop or sewn-down option for nylon name tags or embroidered badge

• Sewn-on suspenders


• Adjustable shoulders• Two upper pockets



• Adjustable side closure• Badge / name grommets• Removable epaulets• Compatible with all U.S. Armor ballistic packages

O P T I O N A L

• Mic tab• VELCRO® loop in place of name tag or badge grommets• Three rows of MOLLE front




USC 5400S T A N D A R D F E A T U R E S

• Adjustable shoulders• Two upper pockets



• Adjustable side closure• Badge / name grommets• Removable epaulets• Compatible with all U.S. Armor ballistic packages

O P T I O N A L

• Mic tab• VELCRO® loop in place of name tag or badge grommets• Three rows of MOLLE front

R E A R V I E W


The U.S. Armor Ranger External Carrier turns concealable body armor into high visibility ballistic protection for detectives, plainclothes officers and first responders. This carrier is the most universal piece of equipment a department can own in this post-9/11 environment.

Front and rear compartments on the Ranger can be easilyaccessed to add your existing U.S. Armor ballistic panels,turning the outer carrier into a high visibility tactical vestusing front and rear ID panels.

E X T E R N A L C A R R I E R

RANGER SERIES



BL ACK WHITE LAPDBLUE

TAN CHICAGOBLUE

GREEN BRIGHTBLUE

NAV Y




RANGER 100


RANGER 200


RANGER 500


• Blank outer surface cover, no pockets or pouches• Waist cummerbund• Accepts all U.S. Armor concealable ballistic panels• Mic holder• Badge holder• Front/back loop for ID patches• 500 Denier Nylon CORDURA® Outer Shell


All the features of the Ranger 100, plus the followingpermanent sewn-down pockets:• Two large utility pouches with internal elastic loops for

magazine retention• One large radio pouch• One handcuff pouch• One flashlight retention strap* Custom pocket configurations available (additional fee will apply)


All the features of the Ranger 100, plus:• MOLLE nylon webbing attachment system for modular

pockets and pouch• Accessory pouches/pockets sold separately

A D D I T I O N A L O P T I O N S

• Threat Level II, or IIIA ballistic panels• MOLLE accessory pouches• ID patches• Tactical carry bag

Molle rows vary based on size of vest


Specifically designed for an officer’s comfort while they are operating in high-heat environments.


• MOLLE webbing for additional pockets/pouch attachments (MOLLE rows vary based on the carrier size)

• FI card pocket behind front ID panel• Mic tab• Full wrap-around drag bar (300 lb. capacity)• 500 Denier Nylon CORDURA® Outer Shell• Rifle Plate Pockets

• Front: 6” x 8”, 8” x 10”, 10” x 12”• Rear: 8” x 10”, 10” x 12”


• Threat Level II or IIIA ballistic panels• Rifle Plates (Level III or IV) 8” x 10” or 10” x 12”:• Ballistic Plate Backer – Threat Level IIIA• Modular MOLLE pouch package available• Tactical carry bag R E A R V I E W

E X T E R N A L C A R R I E R – R I F L E P L A T E C A R R I E R

USBP - SOGC

E X T E R N A L C A R R I E R – R I F L E P L A T E C A R R I E R

RANGER 12 G2

Specifically designed for the United States Department of Homeland Security / Customs and Border Protection, this specialized carrier includes pockets and hose routing for hydration bladder, adjustable padded shoulder straps for weight/distribution and comfort andrear-side drag strap for rescue operations.


• MOLLE webbing for additional pockets/pouch attachments (Please note the number of MOLLE rows vary based on the carrier size)

• Mic tabs on shoulders• Full wrap-around drag bar (300 lb. capacity)• Sized specifically to your existing armor panels• 500 Denier Nylon CORDURA® Outer Shell• Front/rear plate pockets A D D I T I O N A L O P T I O N S

• Threat Level II or IIIA ballistic panels• Rifle Plates,Level III or IV 8” x 10” or 10” x 12”:• Modular MOLLE pouch package

DHS Contract #HSBP1017000001Also available under DHS Contract Formal Outer Garment CarrierTactical Outer Garment Carrier

R E A R V I E W



The ultimate in external vest carriers for patrol-basedindividuals, first responders and investigative personnel. Inserting your existing ballistic panels into this carrier turns your concealable vest into an externally worn tactical carrier. Adding the optional rifle plate and mounting your gear using the external MOLLE system allows wearers to be fully ready for active shooters, warrant services, containments and other tactical missions. S T A N D A R D F E A T U R E S

• Adjustable shoulder straps and side straps for a versatile fit• Front/back 360º MOLLE for adding gear pouches (MOLLE

rows vary based on the carrier size)• Front/back VELCRO® for high visibility ID patches• Comms/hydration guides located on shoulders• 500 Denier Nylon CORDURA® Outer Shell• Rifle Plate Pockets (based on vest size)

• Front / Rear: 8” x 10”, 10” x 12” A D D I T I O N A L O P T I O N S

• Threat Level II, or IIIA ballistic panels• Rifle Plates (Level III or IV) 8” x 10” or 10” x 12”:• MOLLE accessory pouches• Ballistic Plate Backer – Threat Level IIIA

A solid choice, the Secure 100 offers an external or concealable ballistic carrier for use undercover or for visible deployment. Constructed with 500 denier Cordura for durability, this carrier is ideal for fast deployment with a sharp, professional look.


• Velcro loop for front / rear ID patches• Easy access to your ballistic panels• Replaceable Elastic strapping

R E A R V I E W

R E A R V I E W


READY VEST


SECURE 100



FOC


FL-500

Our FOC Vest Carrier offers the versatility of being a front opening vest while providing maximum protection without the discomfort and bulk of front opening vest panels. Easy on and off allows for quick and easy dress.


• Two upper zippered front pockets• Adjustable shoulders and sides for a versatile fit• Front/back 360º MOLLE for adding gear pouches (Please note

the number of MOLLE rows vary based on the carrier size)

• VELCRO® and metal grommet badge holder• Front/back VELCRO® for high visibility ID patches• Comms guides located on shoulders• 500 Denier Nylon CORDURA® Outer Shell

The FL-500 carrier is designed to be worn over an officer’s duty uniform, providing a clean professional appearance.


• Adjustable side openings• Suspender system• Mic Tabs on both shoulders• Fold out ID placard on rear• 3 rows of MOLLE on bottom of front (will vary on smaller sizes)

• Large front zippered slit pocket on chest providing an internal trauma plate pocket and pen holder

R E A R V I E W

R E A R V I E W


F I R E A R M S I N S T R U C T O R V E S T C A R R I E R

F IREARMS INSTRUC TOR 200

F I R E A R M S I N S T R U C T O R V E S T C A R R I E R

F IREARMS INSTRUC TOR 500

The U.S. Armor Ranger tactical outer carrier turns concealable body armor into high visibility ballistic protection for range staff. S T A N D A R D F E A T U R E S

• Waist cummerbund for added stability• Accepts all concealable ballistic panels• Mic holder• Badge holder• Front/back removable “Firearms Instructor” or “Range

Officer” patches• Permanent sewn-down pockets including:• (2) large utility pouches with internal elastic loops for

magazine retention• (1) large radio pouch• (1) handcuff pouch• (1) flashlight retention strap• Custom pocket configurations available (additional fee will apply)• 500 Denier Nylon CORDURA® Outer Shell• Includes 1 set of Firearms Instructor Patches. A D D I T I O N A L O P T I O N S

• Threat Level II, or IIIA ballistic panels• High visibility, light reflective strips

The U.S. Armor Ranger tactical outer carrier turns concealable body armor into high visibility ballistic protection for range staff.


All the features of the 200 Series (less sewn down pockets), plus:• MOLLE nylon webbing attachment system for modular pockets

and pouches (MOLLE rows vary based on the carrier size)• Includes 1 set of Firearms Instructor Patches.• No MOLLE on rear of carrier


• Threat Level II, or IIIA ballistic panels• High visibility, light reflective strips• MOLLE accessory pouches

R E A R V I E W

R E A R V I E W





TAC T ICALConsiderate of operation conditions such high-threat environments, high mobility, and extended deployment, all tactical vests are designed to provide maximum protection no matter the mission. Custom sized(unless otherwise noted) with thoughtful standard features and options, the tactical line offers ideal comfort and security to the wearer allowing focus to be on their immediate objective.



BLACK

ACU/ URBAN DIG ITAL

NAV Y

ATACS

TAN OD GREEN DESERT DIG ITAL


R I F L E P L A T E C A R R I E R

RPC G2The smallest and lightest Rifle Plate Carrier in the U.S. Armor tactical line, the RPC G2 is designed as a throw-over Rifle Plate Carrier, which is worn in conjunction with an officer’s concealable soft body armor for instant deployment. The RPC is worn over the top of an officer’s concealable body armor to provide a higher level of threat protection in the event of an active shooter situation or in rapid response to high-threat environments. The RPC G2 can also be fitted with Threat Level IIIA Ballisticinserts that provide “stand alone” IIIA ballistic protection orprovides additional protection when used behind a rifle plate.


• Front/rear rifle plate pockets (plate size based on carrier size)• RPC G2 500 - Standard MOLLE system front and back

for additional pockets/pouches (MOLLE rows vary based on the carrier size)

• ·RPC G2 100 – No MOLLE System• VELCRO® ID pads and built in mic tabs• Full wrap-around Drag Bar (300 lb. capacity)• High mobility tactical cut for ease of operator movement• Easily adjustable shoulder and side straps for personalized fit• 500 Denier Nylon CORDURA® Outer Shell• Standard sizing available


• Rifle Plates, Level IIIA or IV• Ballistic Plate Backers — Threat Level IIA• ID patches• Accessory MOLLE pouches• Carry bag• RPC-100, No MOLLE

R P C G 2 S T A N D A R D S I Z E S

SMALL (Chest Size 34” to 36”)• Fits Rifle Plates: 8”x 10” and 7.25”x 11.5” SAPIMEDIUM (Chest Size 38” to 40”)• Fits Rifle Plates: 8”x 10” and 8.75”x 11.75” SAPILARGE / X-LARGE (Chest Size 42” to 48”)• Fits Rifle Plates: 10”x 12” and 9.5”x 12.5” SAPI2XL / 3XL (Chest Size 49” to 58”)• Fits Rifle Plates: 10”x 12”, 10.25” x 13.25” SAPI,

and 11” x 14” SAPI

R E A R V I E W

R P C 1 0 0 A V A I L A B L ENo MOLLE


E X T E N D E D R I F L E P L A T E C A R R I E R

ERPC G2Designed to be worn in conjunction with an officer’s concealable soft body armor in a first responder situation or extended deployment. The ERPC G2 can be worn over top of the officer’s soft body armor protection in order to provide a higher level of protection in the event of an active shooter situation or when responding into a high-threat environment. S T A N D A R D F E A T U R E S

• Front/rear rifle plate pockets• Left/right 6” x 6” side plate pockets• MOLLE webbing system on all front/rear/side surfaces

(MOLLE rows vary based on the carrier size)• VELCRO® ID pads and built in mic tabs• Strategically placed padding for better weight distribution

and comfort during extended operations• Full wrap-around Drag Bar (300 lb. capacity)• Integral dual M4/AR15 mag pouches located in front panel

cummerbund• Integral side pockets for enhanced armor protection plates• 500 Denier Nylon CORDURA® Outer Shell• Standard sizing available


• Rifle Plates, Level IIIA or IV• Ballistic Plate Backers — Threat Level IIA• ID patches• Accessory MOLLE pouches• Firstspear tube release system available

E R P C G 2 S T A N D A R D S I Z E S

SMALL (Chest Size 34” to 36”)• Fits Rifle Plates: 8”x 10” and 7.25”x 11.5” SAPIMEDIUM (Chest Size 38” to 40”)• Fits Rifle Plates: 8”x 10” and 8.75”x 11.75” SAPILARGE / X-LARGE (Chest Size 42” to 48”)• Fits Rifle Plates: 10”x 12” and 9.5”x 12.5” SAPI2XL / 3XL (Chest Size 49” to 58”)• Fits Rifle Plates: 10”x 12”, 10.25” x 13.25” SAPI,

and 11” x 14” SAPI

R E A R V I E W

T A C T I C A L C A R R I E R S & V E S T S |


M I S S I O N S P E C I F I C T A C T I C A L V E S T

MST V G2The MSTV G2 is the ultimate outer enhancement to the conventional concealable armor that the first responder is already wearing under their uniform. It achieves the elusive balance between the competing demands of adequate protection and increased mobility through customizable configurations. The MSTV G2 also offers a fully modular tactical armor package where each ballistic panel is removable ensuring complete flexibility for the operator, based on ever-changing situational demands. Front, rear and side plate pockets allow additional protection.


• Removable dedicated side and over-the-shoulder armor panels• Front/rear internal rifle plate pockets with built-in height

adjustment• High Mobility Tactical Cut for ease of operator movement• Rear wrap-around drag handle rescue strap (300 lb.

capacity)• Integrated M4/AR15 (30) round mag pouches in front

cummerbund flap• Front and rear VELCRO® ID pads and built-in mic tabs• Built-in side plate pockets• Easily adjustable shoulder system for comfort• Full coverage MOLLE system (MOLLE rows vary based on the

carrier size)• Removable 500 Denier CORDURA® carrier


• Rifle Plates, Level III or IV• ID patches• Accessory MOLLE pouches• Firstspear tube release system available

R E A R V I E W


H I G H M O B I L I T Y T A C T I C A L V E S T

HMT V 700The ultimate tactical carrier, the HMTV 700 achieves the elusive balance between the competing demands of adequate protection and increased mobility through enhanced ballistic panel contouring. This carrier offers a fully modular tactical armor package where each ballistic panel is removable ensuring complete flexibility for the operator, based on ever-changing situational demands. Front, rear and side plate pockets allow additional protection.

Vest features Honeywell’s Centurion Laser Cut System.


• Removable, dedicated side and over-the-shoulder armor panels

• Front/rear internal rifle plate pockets with built-in height adjustment

• High Mobility Tactical Cut for ease of operator movement• Rear wrap-around drag handle rescue strap (300 lb.

capacity)• Integrated M4/AR15 (30) round mag pouches in front

cummerbund flap• Front and Rear VELCRO® ID pads• Built-in side plate pockets• Easily adjustable shoulder system for comfort• Full coverage MOLLE system (Please note the number of

MOLLE rows vary based on the carrier size)• Removable 500 Denier CORDURA® carrier


• Rifle Plates, Level III or IV, 8” x 10” or 10” x 12”:• Tactical Carry Bag• ID Patches• Accessory MOLLE pouches• Firstspear tube release system available

R E A R V I E W

R E A R V I E W


Shown with optional shoulder, groin, and collar protection

H M T V 5 0 0Shown with optional shoulder,

collar protection, and Firstspear tube release system


S P E C I A L O P E R A T I O N S V E S T

SOV 700The Mission Specific Tactical Vest (SOV 700) has both the ability to receive soft body armor ballistic panels as well as front/back/side hard armor plates for rifle plate protection. The SOV 700 is designed specifically for the first responder to include threat level IIIA ballistic protection at the “over the shoulder” locations and on the officer’s sides. This vest is designed to be worn over the officers’ uniform shirt as a “stand alone” vest or to function as an up-armor plate carrier when worn over existing concealable body armor.

Vest includes Honeywell Centurion Laser Cut Webless Molle System.


• Front/rear/side webless MOLLE system• Front/back/side MOLLE for additional pouches/holsters• Dual, detachable weapon retention system• Dual M4/AR15 magazine pouches located in front panel

cummerbund• Shoulder strap adjustments for a personalized vertical fit• High mobility shoulder cut for increased arm mobility and

reduced fatigue• Outer Carrier is Honeywell CenturionTM - Laser Cut• Inner - 3 Dimensional Nylon Spacer Fabric


• Single Point, Quick Release system for Rapid Ditch• Removable ballistic bicep/groin/collar/throat/coccyx protection• Rifle Plates, Level III or IV, 8” x 10” or 10” x 12”:• ID Patches• Accessory MOLLE pouches• Firstspear tube release system available

R E A R V I E W

Shown with optional shoulder, groin, and collar protection


S P E C I A L O P E R A T I O N S V E S T

SOV G2Provides a single-point, quick ditch capability during boatoperations or aircraft operations over water. This vest alsoprovides the paramedic with an opportunity to have quickaccess to a shot or injured officer when on the sceneperforming emergency aid.


• 360º (1) inch MOLLE attachment system• High mobility shoulder cut• Side opening style for donning/doffing• Upper arm (Bicep) protection attachment system• Durable 500 Denier Nylon CORDURA® external carrier ma-

terial for long lasting wear• Durable nylon mesh interior material for fast drainage and

drying• Removable ballistic panels• Dual, detachable weapon retention system• Removable, fully adjustable cummerbund


• Firstspear tube release system• Pull strap quick release system• Groin, bicep, collar, throat protectionR E A R V I E W



T A C T I C A L C A R R I E R

ROCK 500The ROCK 500 was created for special operation units in addition to SWAT personnel. The vest consists of front, rear, shoulder and side ballistic coverage. The integrated waist cummerbund system can be easily adjusted to various torsos for comfort and fit. The ballistic shoulder pads are fully adjustable to accommodate multiple torso lengths.


• Fully adjustable ballistic shoulders• Fully adjustable ballistic cummerbund• MOLLE type webbing• Horizontal knife sleeve on carrier front• Reinforced rear drag bar (300lb capacity)• Front/back 10”x 12” rifle plate pockets – bottom loading• Wire / hydration channels over both shoulders• Ballistic panels are easily removable for care and cleaning• 500 Denier Nylon CORDURA®

• External pocket/pouch mounting options


• Rifle Plates, Level III or IV :• MOLLE accessory pouches• ID patches• Ballistic Plate Backer, Threat Level IIIA• Ballistic shoulder pads

The ROCK 500 is also available in BALCS sizing – Contact U.S. Armor for information and Pricing.

R E A R V I E W

Shown with optional shoulder pads


T A C T I C A L C A R R I E R

SPEAR 700The SPEAR 700 ballistic panel shape is a design that has been battle-proven. With the SPEAR design ballistic panels you get one dynamic vest platform to build upon.

Vest includes Honeywell Centurion Laser Cut Webless Molle System.


• Wrap around webless MOLLE system• Front and back 10x12 rifle plate pouches, bottom loading• Left/right 6”x6” side armor pockets• Side cummerbund full wrap around style with .045 HDPE

rigid Inserts• Fully adjustable and releasable shoulder and waist straps• Low-profile rear drag bar (300lb. capacity)• 500 Denier Nylon CORDURA®• Inner-Anti-Microbial 3D Spacer Fabric for air flow, comfort

and bacteria protection


• Quick 4-point release system that can be rapidly deployed and reassembled in seconds

• Shoulder, throat, groin, bicep, and collar protection• Rifle Plates, Level III or IV:• MOLLE accessory pouches• ID patches• Carry bag

The SPEAR 700 is also available in BALCS sizing – Contact U.S. Armor for information and Pricing.

S P E A R 1 0 0 A L S O A V A I L A B L E(no MOLLE option)

R E A R V I E W



T A C T I C A L C O N C E A L A B L E V E S T

TAC-CON G2The TAC-CON vest is an overt ballistic vest specifically manufac-tured with the international market in mind. Included with this vest are front and rear plate pockets built into the robust carrier to allow the user to upgrade protection against rifle threats.


• Side opening style• Double elastic waist straps• Padded shoulder straps• Permanent cover• Adjustable shoulders and sides allow the a custom fit• 500 Denier Nylon CORDURA® Permanent Cover


• Rifle Plates, Level III or IV, 8” x 10”/10” x 12”• Nomex® Fire Retardant outer carrier• Removable upper arm and bicep protection• Custom ID patches

R E A R V I E W


T A C T I C A L A S S A U L T V E S T

TAV G2The TAV is U.S. Armor’s bestselling tactical vest. It is a versatile vest design that has a contour cut that improves weight distribution, providing optimal ballistic coverage that drastically improves the individual’s range of motion.


• Patented “helmet-friendly” collar allows for unrestricted head movement

• Adjustable ballistic shoulder straps allowing for various torso lengths

• Rear-panel drag bar (300 lb. capacity)• Mic holder• Internally stowed “pull down” ballistic groin protection• Internal FlexiCuff sleeve• Cummerbund• 500 Denier Nylon CORDURA® cover• Permanent and removable covers available


• Rifle Plates, Level III or IV• Rifle stops• Nomex® fire retardant outer carrier• Removable ballistic bicep/groin/throat protection• Modular pouches• Groin, bicep, collar, throat protectionR E A R V I E W



L I G H T W E I G H T T A C T I C A L

L IGHT WEIGHT G2

Budget-friendly, however designed to offer high mobility with balanced ballistic coverage, the Lightweight Tactical Vest features front, back and side ballistic protection including a permanent ballistic collar.


• Side opening style• Permanent ballistic collar• Extended side flaps for overlapping coverage• Drag bar for rescue operations (300 lb capacity)• Front/back 10”x12” Rifle Plate pockets


• Threat Level II or IIIA ballistic panels• Rifle Plates,Level III or IV 8” x 10” or 10” x 12”:• Ballistic Plate Backer – Threat Level IIIA• Modular MOLLE pouch package

R E A R V I E W


T A C T I C A L

ACCESSORIES

S H O U L D E R / U P P E R A R M P R O T E C T O R

G R O I N P R O T E C T O R

H E L M E T - F R I E N D L Y C O L L A R

T H R O A T P R O T E C T O R

1

1 3

2 4

2

34



Designed for high visibility, the EMS Vest Carrier is equipped with five well-positioned strips of highly reflective material and offers external vest carrier pockets to house essential equipment.


• Sewn-down pockets and pouches specifically designed for the equipment needs of emergency, medical personnel

• Star of Life embroidery patch for identification• High visibility reflective stripes for traffic safety during op-

erations• Four adjustable 1” side release buckles• 500 Denier Nylon CORDURA® Outer Shell

U.S. Armor’s carriers can be tailored to meet the needsand specifications of any Fire/Rescue agency. Choose froma variety of colors in Cordura® and Nomex®. Contact U.S.Armor for more information.

F I R E / R E S C U E

EMS

T A C T I C A L C A R R I E R S & V E S T S

F IRE / RESCUE



100


200


500


• The Fire 100 comes in BALCS sizing for better coverage and protection

• Side cummerbund full wrap around style • Fully adjustable and releasable shoulder and waist straps

by means of 2” buckles• Low-profile rear drag bar (300 lb. capacity)• Front and back rifle plate pouches



• One large front pouch• Side cummerbund full wrap around style • Fully adjustable and releasable shoulder and waist straps

by means of 2” buckles• Low-profile rear drag bar (300 lb. capacity)• Front and back rifle plate pouches


• Wrap around MOLLE for adding pouches• Side cummerbund full wrap around style • Fully adjustable and releasable shoulder and waist straps by

means of 2” buckles• Low-profile rear drag bar (300 lb. capacity)• Front and back rifle plate pouches





CORREC T IONSConsiderate of the diverse threats faced in the correctionaland custodial environments, U.S. Armor’s Correctional Series andaccessories offer options to protect against Spike Levels 1, 2, and 3 enhanced by stab resistant designs that balance high mobility and comfort. Models provide applicable standard features with additional options and accessories to create a tailored configuration that allows the wearers to securely manage their job demands.


BLACK NAV Y TAN OD GREEN DESERT DIG ITAL


C O R R E C T I O N A L

CONCEAL ABLEAnti-stab protection for correctional and custodial environments where ballistic threats are not an issue. Spike protection you can trust for improvised stab weapons in jail, prison, or other custodial environments. U.S. Armor’s Concealable Correctional series offers protection from NIJ 0115.00 spike threats in Level 2 and 3. Each level has been optimized for maximum performance, while maintaining the thinnest, lightest and most flexible package possible, maximizing the user mobility and comfort.


• Removable washable, poly-cotton carrier• Internal 6” X 8” trauma plate pocket


• Titanium Blade (TB3)/Spike 3 trauma plate insert, 6” x 8”• Concealable nylon carry bag• Additional removable, washable carrier• Uniform Shirt External Armor carrier• Ranger external vest carriers• Shirt tails

A N T I - S T A B L E V E L S

• Spike 2• Spike 3 R E A R V I E W


T A C T I C A L C O R R E C T I O N A L V E S T

TAC T ICAL G2The lightweight Tactical Correctional Vest is an anti-stab vest that was designed to offer increased protection in a custody environment without sacrificing mobility. Available in NIJ Spike Levels 1, 2, and 3 and available in varied vest length cuts: above the belt, on top of the belt, and over the belt.


• Side opening style• Internal cummerbund to secure back panel• Front 10” x 12” Plate pockets• Front, rear and side protection• Permanent anti-stab collar• (2) permanently sewn down front utility pockets• Drag bar on rear panel (300 lb. capacity)• Permanent 500 Denier Nylon CORDURA® cover


• (2) sewn down or removable large embroidered ID patches• TB3 titanium Blade 3/Spike 1 trauma plates (8” x 10”, 10”

x 12”)• Ballistic Level IIIA plates – (8”x 10”, 10”x 12”)• Nomex® fire retardant outer cover (removable)• Throat protection• Removable groin protector• Removable bicep/upper arm protection

A N T I - S T A B L E V E L S

• Spike 2• Spike 3

R E A R V I E W

C O R R E C T I O N S |


B A L L I S T I C L E V E L I I C O R R E C T I O N A L V E S T

BSI I + 2Both ballistic and anti-stab protection are available in the same package, a more expansive range of protection in concealablearmor. Very popular for those working in a custody environment that also do prisoner transports outside of their facilities. NIJ Ballistic Level II and NIJ Spike Level 2 Certified.


• Poly/cotton Carrier• Soft trauma plate insert• Removable, washable panel carrier in male and female

size options• “Easy Access” closure system for simplified panel access,

mounted away from the body for increased comfort• Six-point elastic and VELCRO® (removable) closures


• Concealable carry bag (Nylon)• Ranger 100, 200, 300, 500 outer carriers• Soft ballistic plate options (Level IIA, II and IIIA)• Stainless steel plate 6” x 8”• AP handgun steel plate 6” x 8”• Titanium blade (TB3) plate 6” x 8”• Shirt tails

R E A R V I E W


C O R R E C T I O N A L V E S T

ACCESSORIES

S H O U L D E R / U P P E R A R M P R O T E C T O R

G R O I N P R O T E C T O R

H E L M E T - F R I E N D L Y C O L L A R

T H R O A T P R O T E C T O R

1

1 3

2 4

2

34

C O R R E C T I O N S |



R I F L E

ARMOR PL ATESU.S. Armor offers a wide range of Rifle Armor Plates designed toincrease your protection from rifle and armor piercing rounds. Our NIJ 0101.04/.05 and NIJ 0101.06 certified lines of single and multi-curve rifle plates are available in military-styled Shooter’s Cut or rectangular Full Cut with mitered edges.


Removable trauma plate inserts provide wearers with additional impact protection over the heart and vital organ area of the center chest. Titanium Blade Plates offer protection from knives, ice picks and other stabbing force penetrations.

Trauma plates also offer extra impact protection fromnon-traditional puncture threats such as steering wheel columns and jagged metal forces from vehicular accidents, buckshot and other shrapnel and blunt weapon strikes.

B A L L I S T I C - S T A B - I C W

TRAUMA PL ATES

L E V E L I I I A

RIGID BALL IST IC PL ATES

• Ballistic Level IIIA+ (Stand Alone)• Trauma / Impact Plate• Rigid Construction – Pressed Honeywell Spectra

M O D E L 1 0 0 — S I N G L E C U R V E• 5” x 7” — 0.3 LBS• 5” x 8” — 0.4 LBS• 6” x 8” — 0.4 LBS• 7” x 9” — 0.6 LBS

M O D E L 2 1 0 — M U L T I - C U R V E• 8” x 10” — 0.6 LBS• 10” x 12” — 1 LBS


L E V E L I I I A

BALL IST IC TRAUMA PADS

B A L L I S T I C / S T A B I C W P L A T E P A N E L

TB3

• Soft ballistic aramid material panel• Design based on one of our certified IIIA Ballistic Packages• Encased in a water resistant sealed pouch• Other sizes also available• 6” x 8” — 0.3 LBS

• Used in conjunction with certified NIJ level II or greater vest• Soft / rigid ballistic aramid and titanium panel• Effective against Level IIIA ballistic threats• Knife level 3 protection• Other sizes also available• 6” x 8” — 0.4 LBS

T R A U M A P A D S

FLEXIBLE SOF T TRAUMA PADS

• Reduces the trauma (BFS) of a bullet impact• Soft ballistic aramid material panel• Encased in a water resistant sealed pouch• Other sizes also available• 6” x 8” — 0.2 LBS

T A C T I C A L

ARMOR P IERCING ICW PL ATE

• Tactical AP Strike Plate in a Kevlar® and nylon pouch• To be used in conjunction with our IIIA vests • Available in 6” x 8” (1.2 lbs) or 10” x 12” (3 LBS 1 OZ)


H A R D A R M O R

RIFLE PL ATES

R I F L E P L A T E S

400 SERIES

• NIJ 0101.06 Certified• Ballistic Level III (Stand Alone) • Rifle Plate - Single Curve• Thickness - 1.26 Inches / 32 mm • Composite Construction

• NIJ 0101.06 Certified• Ballistic Level III+ (Stand Alone) • Rifle Plate - Single Curve • Thickness - 1.1 Inches / 28 mm • Ceramic and Composite Construction

SIZES CUTS WEIGHTS

8” X 10” SHOO T ER 2.1 LBS / .9 KG

10” X 12” SHOOTER 3.2 LBS / 1 .5 KG

8” X 10” FULL 2.3 LBS / 1 .1 KG

10” X 12” FULL 3.6 LBS / 1 .6 KG

SIZES CUTS WEIGHTS

8” X 10” SHOO T ER 3.8 LBS / 1 .7 KG

10” X 12” SHOOTER 5.8 LBS / 2 .6 KG

8” X 10” FULL 4.2 LBS / 1 .9 KG

10” X 12” FULL 6.4 LBS / 2 .9 KG

M O D E L 3 4 0 1 M O D E L 3 4 1 0

U.S. Armor offers a wide range of Rifle Armor Plates designed to increase your protection from rifle and armor piercing rounds. Our NIJ 0101.04/.05 and NIJ 0101.06 certified lines of single

and multi-curve rifle plates are available in military-styled Shooter’s Cut or rectangular Full Cut with mitered edges.



600 SERIES

• NIJ 0101.06 Certified• Ballistic Level III (Stand Alone) • Rifle Plate - Multi-Curve • Thickness - 1.2 Inches / 30 mm • Spectra Construction

• NIJ 0101.06 Certified• Ballistic Level IV (Stand Alone) • Rifle Plate - Multi-Curve • Thickness - 1.19 Inches / 30 mm• Ceramic and Spectra Construction

• NIJ 0101.06 Certified• Ballistic Level III+ (Stand Alone) • Rifle Plate - Multi-Curve • Thickness - 1.14 Inches / 29 mm • Ceramic and Composite Construction

R I F L E P L A T E S |

SIZES CUTS WEIGHTS

8” X 10” SHOO T ER 3.8 LBS / 1 .7 KG

10” X 12” SHOOTER 5.8 LBS / 2 .6 KG

8” X 10” FULL 4.2 LBS / 1 .9 KG

10” X 12” FULL 6.4 LBS / 2 .9 KG

7.5” X 11.5” SAPI 2.0 LBS / 0 .9 KG

8.75” X 11.75” SAPI 2.5 LBS / 1 .1 KG

9.5” X 12.5” SAPI 2.9 LBS / 1 .3 KG

10.25” X 13.25 SAPI 3.4 LBS / 1 .5 KG

11” X 14” SAPI 3.9 LBS / 1 .8 KG

SIZES CUTS WEIGHTS

8” X 10” SHOO T ER 2.8 LBS / 1 .3 KG

10” X 12” SHOOTER 4.3 LBS / 2 .0 KG

8” X 10” FULL 3.1 LBS / 1 .4 KG

10” X 12” FULL 4.8 LBS / 2 .2 KG

7.5” X 11.5” SAPI 3.1 LBS / 1 .4 KG

8.75” X 11.75” SAPI 3.8 LBS / 1 .8 KG

9.5” X 12.5” SAPI 4.5 LBS / 2 .1 KG

10.25” X 13.25 SAPI 5.2 LBS / 2 .4 KG

11” X 14” SAPI 6.0 LBS / 2 .7 KG

SIZES CUTS WEIGHTS

8” X 10” SHOO T ER 3.9 LBS / 1 .8 KG

10” X 12” SHOOTER 6.0 LBS / 2 .7 KG

8” X 10” FULL 4.3 LBS / 2 .0 KG

10” X 12” FULL 6.7 LBS / 3 .1 KG

7.5” X 11.5” SAPI 4.3 LBS / 1 .9 KG

8.75” X 11.75” SAPI 5.4 LBS / 2 .4 KG

9.5” X 12.5” SAPI 6.3 LBS / 2 .9 KG

10.25” X 13.25 SAPI 7.2 LBS / 3 .3 KG

11” X 14” SAPI 8.4 LBS / 3 .8 KG

SIZES CUTS WEIGHTS

8” X 10” SHOO T ER 4.9 LBS / 2 .2 KG

10” X 12” SHOOTER 7.5 LBS / 3 .4 KG

8” X 10” FULL 5.4 LBS / 2 .5 KG

10” X 12” FULL 8.4 LBS / 3 .8 KG

M O D E L 3 6 0 0

M O D E L 4 6 0 0

M O D E L 4 4 0 1

M O D E L 3 6 1 0

• NIJ 0101.06 Certified• Ballistic Level IV (Stand Alone) • Rifle Plate - Single Curve • Thickness - 0.93 Inches / 24 mm• Ceramic and Composite Construction


• NIJ 0101.06 Certified• Ballistic Level III (Stand Alone) • Rifle Plate - Multi-Curve • Thickness - 1.05 Inches / 27 mm • Spectra Construction

• Tested to NIJ 0101.06• Ballistic Level IV (Stand Alone) • Rifle Plate - Multi-Curve • Thickness - 1.04 Inches / 26 mm• Spectra Construction

• Tested to NIJ 0101.06• Ballistic Level III+ (Stand Alone) • Rifle Plate - Multi-Curve • Thickness - .98 Inches / 25 mm • Spectra Construction

SIZES CUTS WEIGHTS

8” X 10” SHOO T ER 1.4 LBS / 0 .6 KG

10” X 12” SHOOTER 2.2 LBS / 1 .0 KG

8” X 10” FULL 1.6 LBS / 0 .7 KG

10” X 12” FULL 2.4 LBS / 1 .1 KG

7.5” X 11.5” SAPI 1.5 LBS / 0 .7 KG

8.75” X 11.75” SAPI 1.9 LBS / .86 KG

9.5” X 12.5” SAPI 2.3 LBS / 1 .0 KG

10.25” X 13.25 SAPI 2.6 LBS / 1 .2 KG

11” X 14” SAPI 3.0 LBS / 1 .4 KG

SIZES CUTS WEIGHTS

8 X 10" SHOOTER 2.5 LBS / 1 .7 KG

10" X 12" SHOOTER 3.9 LBS / 1 .8 KG

7.5" X 11.5" SAPI 2.8 LBS / 1 .3 KG

8.75" X 11.75" SAPI 3.5 LBS / 1 .6 KG

9.5" X 12.5" SAPI 4.1 LBS / 1 .8 KG

10.25" X 13.25" SAPI 4.7 LBS / 2 .1 KG

11.0" X 14.0" SAPI 5.4 LBS / 2 .5 KG

SIZES CUTS WEIGHTS

8 X 10" SHOOTER 3.2 LBS / 1 .5 KG

10" X 12" SHOOTER 4.9 LBS / 2 .2 KG

7.5" X 11.5" SAPI 3.5 LBS / 1 .6 KG

8.75" X 11.75" SAPI 4.4 LBS / 2 .0 KG

9.5" X 12.5" SAPI 5.1 LBS / 2 .3 KG

10.25" X 13.25" SAPI 5.9 LBS / 2 .7 KG

11.0" X 14.0" SAPI 6.8 LBS / 3 .1 KG

M O D E L 3 8 0 0

M O D E L 4 8 0 0

M O D E L 3 8 1 0


800 SERIES


• Single Curve• Ballistic Level: III ICW with Certified U.S. Armor IIIA Vest• Thickness: .6 Inches / 15mm• Construction: Ceramic / Woven Aramid• Black CORDURA® Nylon.

• Single Curve• Ballistic Level: III ICW with Certified U.S. Armor IIIA Vest• Thickness: .78 Inches / 19.8 mm• Construction: Ultra High Molecular Weight Polyethylene• Cover: Black CORDURA® Nylon

• NIJ 0101.06 Certified, Ballistic Threat Level III+• 13/64 or 5mm thickness• 10 year warranty• Multi-hit capability• Standard black color• Single and multi-curve plate available• Anti-spall coating available


SIZES CUTS

5” X 7” S AP I 1.8 LBS

6” X 6” S AP I 2 LBS

6” X 8” S AP I 2.7 LBS

7” X 8” S AP I 3.1 LBS

8” X 10” SAPI 4.4 LBS

10” X 12” SAPI 6 LBS

5” X 7” FULL

6” X 6” FULL

6” X 8” FULL

7” X 8” FULL

8” X 10” FULL 4.7 LBS

10” X 12” FULL 6.5 LBS

SIZES CUTS

5” X 7” S AP I .95 LBS

6” X 6” S AP I .98 LBS

6” X 8” S AP I 1.25 LBS

7” X 8” S AP I 1.5 LBS

8” X 10” SAPI 1.9 LBS

10” X 12” SAPI 2.9 LBS

5” X 7” FULL

6” X 6” FULL

6” X 8” FULL

7” X 8” FULL

8” X 10” FULL 2.15 LBS

10” X 12” FULL 3.3 LBS

SIZES CUTS WEIGHTS

8” X 10” SHOO T ER 6.3 LBS

10” X 12” SHOOTER 6.3 LBS

8” X 10” FULL 6.3 LBS

10” X 12” FULL 6.3 LBS

1 0 0 S E R I E S 2 0 0 S E R I E S

M O D E L 6 4 7

S T E E L R I F L E P L A T E S

MODEL 600


ICW


N I J 0 1 0 1 . 0 6 C E R T I F I E D

RIFLE PL ATE BACK ERS

MODEL LEVEL

6316M I I I A

5316A I I I A

3316 I I I A

1316 I I I A

SIZES CUTS

8” X 10”

8” X 11.5” SAPI

8.75” X 11.75” SAPI

9.5” X 12.5” SAPI

10” X 12”

10.25” X 13.25” SAPI

11” X 14” SAPI

U.S. Armor’s Ballistic Plate Backers provide additional protection and trauma reduction when inserted behind a U.S. Armor Ballistic Rifle Plate. They can also be used in a rifle plate carrier without a rifle plate if a light weight, highly mobile option is desired.





S P E C I A L T Y G E A R &

ACCESSORIESU.S. Armor is proud to equip its community of officers with head-to-toe safety gear and tools suited for dynamic scenarios, environments and threats. Our catalog of specialty equipment and accessories are designed to complement armor packages while maintaining superior quality, comfort and reliable protectionat all times, under all circumstances.


B A L L I S T I C S H I E L D S

EQUALIZEROur hard armor shields are designed to protect against threat level IIIA handgun. They are available in three standard sizes to fit the needs of your officers.


• Durable edge wrap protection• 5” x 11” Viewports• Rear VELCRO® loop rear pouch attachment• Hybrid composite ballistic construction• Ambidextrous straight bar handle• High strength forearm strap• Ambidextrous foam forearm pad• Available with or without viewport


• LED Light System with Strobe - 1.1 lbs. (P/N F-6001-ISL)• Agency ID Placard - 3” x 9”• Carry bag• Additional sizes available

S I Z E S A V A I L A B L E ( W I T H O R W I T H O U T W I N D O W )

• 18” x 30”• 20” x 34”• 24” x 36”

C O L O R S A V A I L A B L E

R E A R V I E W

RANGER COYOTE BLACK


BatShields - Each model of Baker Batshield patentedballistic shields are comprised of three separate proprietary hard composite NIJ IIIA armor panels. Compact when folded

O P T I O N S F O R B A T S H I E L D S

• Wide angle LED lighting• SIM training covers• Identification decals

and presenting a commanding appearance upon opening,the three overlapping multi-curved panels provide protective wrap-around ballistic cover to the armed responder on the move.

B A K E R B A L L I S T I C S

BATSHIELDS

BATSHIELD THREAT LEVEL WEIGHT COVERAGE DIMENSIONS DESCRIPTION

PATROLBAT I I I A 13.5 LBS 5.4 SQ/ F T 29” X 31.5” Lightweight Aramid Composite Armor

RESPONDERBAT I I IA 11.3 LBS 6.2 SQ/ F T 34” X 32” Ultra-lightweight Polyethylene Composite Armor, includes Breakaway Bag

TACTICALBAT I I IA 13.2 LBS 7.7 SQ/ F T 35” X 37.5” Ultra-lightweight Polyethylene Composite Armor, includes Breakaway Bag



MRAPS and MRAPS-IV patented shield models protect against centerfire rifle caliber threats while enabling users the capability of accurately firing long-guns or handguns while on the move. The armor components are constructed utilizing an exclusive and


• POLICE or SHERIFF Identification Decals • QuikDonInstant wear attachment• FastTex female snaps toattach to body armor anchor points• Protective padded carry bag with shoulder strap


• LED Lighting system with remote switch capability• Custom identification decals• Hard point yoke mounting harness• Non-ballistic MRAPS-IV training shield available• Left-handed version of MRAPS available

proprietary military grade polyethylene composite armor matrix – the most efficient NIJ rated level III and IV ballistic shields available.

Custom colors and/or camouflage (minimum quantity may apply)

B A K E R B A L L I S T I C S P R O T E C T I V E S H I E L D S

MRAPS

SHIELD THREAT LEVEL WEIGHT COVERAGE DIMENSIONS DESCRIPTION

MRAPS I I I 19.2 4.2 SQ/ F T 20.5” X 34” Proprietary polyethylene armor panel and aluminum through-bolt protectors

MRAPS-IV IV 19.2 4.2 SQ/ F T 15.5” X 30” Proprietary polyethylene / SiC ceramic armor matrix and aluminum through-bolt protectors

A V A I L A B L E S H I E L D C O L O R S

BLACK NAV Y OD GREEN DARK GREEN

SAND


The ASDB was designed specifically to address the needs of personal in an active shooter situation. The ASDB is capable of carrying both the Hard Ballistic Deployment Shield and the Flexible Ballistic Blanket. The Active Shooter Deployment Bag can be retro-fitted to mount securely on a customized Honda African Twin Motorcy-cle. That was brainchild of Chief Keith Kauffman of the Redon-do Beach Police Department. Chief Kauffman enlisted Honda designer / motorcycle builder Roland Sands and U.S Armor Corporation to turn this concept for officer safety into a reality.


A V A I L A B L E B A G C O L O R

BL ACK

BL ACK DESERT DIG ITAL

NAV Y WOODLAND DIG ITAL

OD GREEN TAN ATACSACU/ URBAN DIG ITAL

A C T I V E S H O O T E R D E P L O Y M E N T B A G

ASDB


A S D B

HARD SHIELD

A S D B

SOF T SHIELD


• Approx. 11” x 16” x 1.25” closed.• Approx. 16” x 40” deployed.• Weight: 7.5 lbs• Threat Level: IIIA Stand alone• Tested and verified to meet or exceed ballistic resistance as

specified under NIJ Standard–0108.01 T H R E A T T E S T I N G

Special threat testing conducted in accordance with NIJ Standard – 0101.06 (modified)• 9 x 19 mm Parabellum• .45 ACP• .40 SandW• FN 5,7 x 28mm• .357 Magnum• .357 SIG• .44 Magnum• 7.62 x 25 mm Tokarev


CORDURA® cover with opposing handles Four carry handles turns the shield into an emergency gurney• Approx. 11” x 16” x 1.25” closed.• Approx. 33” x 48” deployed.• Weight: 12.37 lbs• Threat Level: IIIA Stand alone• Tested and verified to meet or exceed ballistic resistance as

specified under NIJ Standard–0101.05


Special threat testing conducted in accordance with NIJ Standard–0101.05 (modified).• Speer 9mm• Winchester 9mm 127 gr SXT• 40 SandW 155gr JHP• Remington 44 Mag 240gr SJHP• 7.62x25 Torkrav 85gr FMJ

S P E C I A L T Y G E A R & A C C E S S O R I E S |


QUICK RELEASE EMERGENCY BALL IST IC DOOR / WINDOW BLANKET

DOOR SHIELD QR

The Door Shield-QR is designed for fast response during an active shooter or other emergency situations. The Door Shield-QR is a self-contained Ballistic Shield (Level II or IIIA) that is rolled up and mounts above any open or closed door frame. One quick pull on the release cord activates the quick release and the Ballistic Shield releases from its mount above the door frame and drops to the floor, instantly adding protection to the doorway and covering any windows. Available in both Ballistic levels II or IIIA using the same configuration as our NIJ 0101.06 Certified vests and is available is various sizes depending on your door size.


• Easy mount deployment system that can mount over any doorway or window with 18” of clearance

• Single pull-release cord for easy,fast deployment• Easy to roll-up ballistic blanket and recover from deployment• Ballistic blanket and deployment mounting board is covered

in 500 Denier Nylon CORDURA®


• CORDURA® dust cover

S T A N D A R D S I Z I N G

• 36” wide x 84” long• 48” wide x 84” long• Additional sizes are available – Contact U.S. Armor for more

information

A V A I L A B L E C O L O R S

Custom colors available (additional fee may apply)

BLACK NAV Y OD GREEN TAN


B A L L I S T I C B L A N K E T S

BREACHER BL ANK ET

This ballistic blanket is designed for use during explosiveand dynamic breaching missions. The Breacher Blanket provides protection for the detonator and those stacked behind fromblast pressure and fragmentation.


• Standard size of 32” x 75” (custom sizes available)• Large loops and handles on all sides for ease of use and• consistent deployment• Can be used as a portable ballistic entry shield• Can be used as an emergency litter• Tough CORDURA® cover to resist wear and tear• Intrinsically safe no metal snaps, zippers, or parts to

spark, frag, or fail• Permanent 500 Denier Black CORDURA® cover (other• colors available).• Available in ballistic level II or IIIA

F R A G M E N T A T I O N P R O T E C T I O N

• DuPont™ Air Entangled Kevlar® 129® package• Fragmentation: 1476.38 fps/450 mps

F O L D E D V I E W



A “must have” for technicians engaged in rendering safeor performing controlled detonations of explosive devices.Designed in partnership with the Los Angeles Police Department EOD Section for helping to control IEDs and bombs. This bomb blanket’s exclusive stitch pattern allows the blanket to be shapeable and self-tenting to facilitate controlling direction or diverting blast pressure and fragmentation from pipe bombs, IEDs, and other explosive devices and compounds.


• Designed to fold into a compact package for ease of storage• Large loops on all sides for ease of use and consistent

deployment• Intrinsically safe no metal snaps, zippers, or parts to

spark, frag, or fail• Used by agencies throughout the world• Measures 48” x 48”custom sizes available)• Permanent 500 Denier Black CORDURA® cover (other

colors available).

F R A G M E N T A T I O N P R O T E C T I O N

• DuPont™ Air Entangled Kevlar® 129® package• Fragmentation: 1476.38 fps/450 mps


• Aluminum stand available to convert your bomb disposal Blanket into a “fixed“ position portable shield

• Bomb Safety Circle

B O M B D I S P O S A L B L A N K E T

BOMB BL ANK ET

B O M B S A F E T Y R I N G


B A L L I S T I C B L A N K E T S

BALL IST IC BL ANK ET

One of the most flexible tools an operator can have at their disposal. This ballistic blanket can be used to evacuate civilians from a dangerous “active shooter” scenario, to protect and cover a fallen officer while back up arrives, or used to armor any area where the operator needs additional protection; the only limitation is the operator’s imagination/situation. NIJ .04/.05 level IIIA Certified. This ballistic blanket can also be used in industrial applications where protection is needed from possible machinery failure.


• Pre-sewn to enable easy storage and transport• Can be deployed as a static, horizontal shield• Allows a variety of suspension and facilitate use as an

emergency litter• Intrinsically safe no metal snaps, zippers, or parts to spark,

frag, or fail• Permanent 500 Denier Black CORDURA® cover

B A L L I S T I C C A P A B I L I T I E S ( V - 5 0 P E R F O R M A N C E )

• Our Ballistic Blankets can be manufactured using any of our level II or IIIA ballistic packages.


• Aluminum stand (black powder coated or natural) available to convert your Ballistic Blanket into a “fixed“ position portable shield



The full coverage PASGT Helmet is a general duties helmet suitable for military and police tactical use. The helmet isconstructed from para aramid material and provides lightweight, robust protection from ballistic and fragmentation projectiles and other low energy threats. The latest harness design offers a stable and comfortable fit with individual adjustment capability. This four-point, fully adjustable harness is anchored to the shell with ballistic resistant bolts.

B A L L I S T I C H E L M E T S

PASGT

B A L L I S T I C

HELMETS



COMBAT HELMET


ACH/ MICH


TANK

The Combat Helmet is designed with a reduced profile to ensure a better field of vision and to provide a lighter helmet than the PASGT helmet. The reduced profile ensures that the helmet can be used with weapons with scopes.

The MICH (or ACH) Helmet was designed to replace the inservice PASGT helmet. The same size as the Combat Helmet, the MICH helmet features a reduced weight, higher cut at the back and sides and removal of the front peak. This new, low profile provides excellent compatibility with communications equipment, gas masks and especially helmet mounted night vision goggles. The helmet is constructed from para aramidmaterial and provides lightweight, robust protection fromballistic and fragmentation projectiles and other low energy threats. It offers a fully adjustable harness for secure,comfortable fit.

Designed to accommodate advanced communication andhearing protection equipment, this is an extreme lightweightcut-down helmet with ear sections removed. This helmet offers minimum weight with maximum audio acuity.



This lightweight and specially designed clear armor visor offersthe helmet wearer a clamp-on, multi-hit ballistic clear multi-layer visor designed to fit most commonly available ballistic helmets. The ballistic visor is an optimized shape designed specifically to maximize the amount of protection consistent with accurateaiming and firing of a long-gun as well as handguns.


• Clamp on design fits most ballistic helmets, can be positioned up or down

• Laminated acrylic and polycarbonate clear armor-grade plastic ballistic material

S P E C S

• Weight: 2.98 lbs

T H R E A T L E V E L

• NIJ 0106.01 - IIIA

BLACK NAV Y UN BLUEOD GREEN TAN

The Rapid Response Special Ops Helmet is designed for use by Special Forces where lightweight and minimal interference to visual and hearing functions are essential. The low-profile helmet provides excellent compatibility with communications equipment, gas masks, etc.


• Innovative suspension system• Built-in night vision mount on front and Picatinny rails on sides• Adjustable “Ratcheting” headband


• Team Wendy adjustable headband• Cloth covers available in various color/camouflage options• Padded helmet carry bag• Riot Face Shields• Ballistic Face Shields, Level IIIA• Upgraded suspension systems

T H R E A T L E V E L

• NIJ 0106.01 - IIIA



BALL IST IC FACE SHIELDB A L L I S T I C H E L M E T S

RAPID RESPONSE


The XT Tactical Riot Helmet is a lightweight and super toughprotective helmet for military and law enforcement. Whetherits crowd, riot, or corrections control, the high density thermo composite shell combined with the Lexan® polycarbonate face shield provides full head and face protection against almost all non-ballistic threats, such as chemicals, rocks, bottles and other projectiles. FACE SHIELD - Helmet is supplied with a 6 1/2” full-flip polycarbonate face shield .150” thick with a clear optical grade finish. The liquid seal is molded TPE material, black and semi-rigid. The liquid seal is affixed to prevent passage of liquids from the helmet dome or face shield into the inner shield surface when the shield is in the deployed position.


• Energy absorbing expanded polystyrene (EPS) liner in all impact areas

• Quick release harness-retention system• Permanently attached neck protector• Lexan® polycarbonate tactical face shield with liquid seal• Accepts most gas masks• Shell edge is finished with a tough molded trim• Scratch resistant finish

S P E C S

• Weight: 1.55 lbs (0.48kg)• Shield Thickness: .25 inches


Other colors available upon request


Universal fit face shield system that adapts to many helmets in order to provide face protection in riot conditions. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be transferred to the right or left of the shield for individual preference.

S P E C S

• Weight: 1.55 lbs • Shield Thickness: .25 in

BLACK

H E L M E T S

RIOT HELMET


ACCESSORIES

H E L M E T S

RIOT FACE SHIELD

HELMET REPL ACEMENT HARNESS

HELMET VELCRO ® K IT

HELMET RATCHET SUPSENSION

HELMET COVER

HELMET BAG


When it comes to K-9 Armor, why not consider the best?After years of research and development in conjunction with numerous Law Enforcement Agencies, U.S. Armor produces the top-of-the-line K-9 vest in the industry. Each vest is guaranteed to fit your dog perfectly with the ideal cut and weight to ensure that your working police dog never has to carry more weight than necessary. Compatible with all U.S. Armorballistic packages

B A L L I S T I C P R O T E C T I O N

• XLT2A - NIJ 0101.05 threat level IIA• XLT2 - NIJ 0101.05 threat level II• 5216 - NIJ 0101.06 threat level II• 6216M - NIJ 0101.06 threat level II

S T A B P R O T E C T I O N

• Spike Level 2• Spike Level 3


• Carry bag• “Go-Pro” attachment mounts• Molle webbing• Additional ballistic/stab packages available• ID patches

C U S T O M I Z A T I O N

Any design variations from the standard K-9 Protection Vests will require a nominal change of design fee. On orders of more than 25 units this fee may be waved based on the amount of customization. Please note customization work will extend delivery time.


BLACK

DESERT DIG ITAL

NAV Y

WOODLAND DIG ITAL

OD GREEN TAN

ATACSACU/ URBAN DIG ITAL

K - 9 P R O T E C T I O N V E S T S

K9


K - 9 P R O T E C T I O N V E S T S

K-9 VEST


• 500 Denier CORDURA®, Durable Cover• Control handle for better control and lifting• Removable strap system for easy donning/doffing• Adjustable strap features for perfect fit, every time

• VELCRO® loop on left and right for the attachment of ID patches• Multiple “D” Rings for fast securement lease attachment• Heavy duty parachute quality strapping, attachment points and

buckles for safe repelling



Properly store and organize your tactical gear with a wide variety of versatile, all-weather pouches. Available in hundreds of designs and sizes in all attachment systems and configurations, each is

constructed for easy accessibility, secure carrying, and versatility to support maximum performance. Rely on your U.S. Armor pouch to protect your gear and support you as duty calls.


POUCHES

POUCH DIMENSIONS DESCRIPTION

SMALL 4 .5 ” X 4 .5 ” X 2 ” VELCRO®, Snap, or Zipper Closures Available

MEDIUM 5” X 4.5” X 2” VELCRO®, Snap, or Zipper Closures Available

LARGE 5.5” X 5” X 2” VELCRO®, Snap, or Zipper Closures Available

X-LARGE 8” X 8” X 2” VELCRO®, Snap, or Zipper Closures Available

U T I L I T Y


SMALL 6 ” X 3 ” X 1 .5 ” Fits Motorola HT 100, 600, and 1000, MT 1000, 2000, P110, GP 300 XTS 3000

LARGE 7.5” X 3” X 1.5” Fits Motorola MTS 2000, MT 500, Saber, and GE M-RK

X-LARGE X-Large radio pouch

UNIVERSAL Universal radio pouch

R A D I O




L ARGE P ISTOL 6 ” X 9 ” X 1 ” Fits Glock 17, 19, 21, 22, 23, 45; Colt 45, Beretta 92, Sig Sauer P226, SandW 590

X26 TASER 6” X 9” 1” X26 Taser Holster, SR1 Buckle

X2 L ARGE X2 Taser Holster

H O L S T E R S


SMALL 6.5” X 1.5” X 1.5” Fits Laser SureFire 9z, 6P, Laser SureFire Stinger

MEDIUM 11” X 1.5” X 1.5” Fits Streamlight Stinger

UNIVERSAL 7”X 1.5”X 1.5” Universal Flashlight Pouch

ASP 10” X 1.5” X 1.5” Asp Baton Pouch

MULT I -TOOL 4.5” X 1” X 3/4” Small Multi-Tool

MULT I -TOOL 7” X 1” X 3/4” Large Multi-Tool

F L A S H L I G H T S


PISTOL Single Pistol Pouch, Fits Glock 45, P226, Colt 45

PISTOL Side by Side Pouch, Fits Glock 45, P226, Colt 45 Single Stacked Mags

PISTOL Side by Side Pouch, Fits Glock 45, P226, Colt 45 Double Stacked Mags

PISTOL Side by Side Pouch Hold 4 mags - 2 each side, Fits Glock 45, P226, Colt 45

M-16 5” X 3.5” X 1.5” Fits M-16 20rnd mag, Black

M-16 Fits M-16 Single 30 Round Mag

M-16 S IDE X S IDE Side by Side Pouch, Fits M16 Single 30 Round Mag

SMG 7” X 2” X 1” Fits SMG 30 Round Mag

MP5 - 9MM 7” X 2” 1.5” Fits 9mm MP5 30 Round Mag

MP5 - 40 CAL 8” X 2” X 2” Fits 40 cal MP5 30 Round Mag

SNIPER 7” X 8” X 1” Fits 20 Round Sniper Rack

SHOTGUN 7” X 4.5” X 1.5” Fits 6 Round Shotgun Rack

SHOTGUN 7” X 6.5” X 1.5” Fits 12 Round Shotgun Rack

MP7 5”X 2”X 1” Fits MP7 30 Round Mag

M4 5” X 5” X 5” Fits M4 Mag Open Top with Bundle Clip

MAG DUMP Folding Ammo Mag Dump Pouch

M A G P O U C H E S



MACE 4 .5 ” X 2 ” X 1 .5 ” Mace / Pepper Spray Pouch

MED. GAS MASK Medium Gas Mask Pouch

LRG. GAS MASK 10” X 10” X 5” Large Gas Mask Pouch, 2 Side Openings

SMALL 3.5” X 2” X 2” Fits Def-Tec 25, 16 First Defender Pepper Spray, Flash Bang (CTS 7290)

SM. GAS/SMOKE 3” X 1.5” 1/5” Smal l Gas / Smoke Pouch

SMALL 5.5” X 2” X 2” Fits Def-Tec 25, 16 First Defender Pepper Spray, Flash Bang (CTS 7290)

SMALL 5.5 X 1.5” X 1.5” Smal l Gas / Smoke Pouch

C H E M I C A L A G E N T S


MEDIC 5 ”X 7 ”X 3 ” Medic Pouch

MEDIC 5”X 8”X 2” Medic Pouch



M E D I C A L


CELL PHONE 5 .5 ” X 2 .75 ” X . 5 ” Cellular Phone Pouch

CELL PHONE 8” X 3.25” X .5” Cellular Phone Pouch

CELL PHONE iPhone 6 Plus Pouch

C E L L P H O N E


PUMA I I 1 -1 /2 ” X 4 -1 /2 ” “Puma II” Police Special Recorder Pouch

RECORDER 3.5” X 2” X 3/4” Recorder Pouch

R E C O R D E R S


SIDE BALLISTIC PLATE 6 ” X 6 ” Side Ballistic Plate Pouch (PAIR)

CAMELBACK 17.5” X 6.5” X 3.5” 72 oz. Camelback Pouch

M I S C .


HANDCUFFS 5 ” X 4 ” X 1 ” Fits Most Standard Sized Cuffs

HANDCUFFS 5 ” X 4 ” X 1 .51 ” Double Handcuff Pouch, Fits Most Standard Sized Cuffs

H A N D C U F F S



POUCH DESCRIPTION

PATROL Fits Patrol Pocket Pack

PATROL W/ RATS Fits Patrol Pocket Pack RATS

TRAUMA PLATE Fits Trauma Plate Pack

TRAUMA W/ RATS Fits Trauma Plate Pack RATS

CRIT ICAL MISSION Fits Critical Mission Pack

NSW ADVANCED BAT TLE Fits NSW Advanced Battle Pack

TRAUMA PACK DESCRIPTION

PATROL POCKET SWAT T Tourniquet, Celox Hemostatic Gauze (2-pack), OSS Combat Compression Bandage,Pair Nitrile Gloves, Field Instruction Card.

PATROL W/ RATS RATS Tourniquet, Celox Hemostatic Gauze (2-pack), OSS Combat Compression Bandage,Pair Nitrile Gloves, Field Instruction Card.

TRAUMA PL ATE SWAT T Tourniquet, Celox Hemostatic Gauze (2-pack), OSS Combat Compression Bandage,Pair Nitrile Gloves, Field Instruction Card.

TRAUMA W/ RATS RATS Tourniquet, Celox Hemostatic Gauze (2-pack), OSS Combat Compression Bandage,Pair Nitrile Gloves, Field Instruction Card

CRIT ICAL MISSIONSWAT T Tourniquet, Combat Gauze, OSS Compression Bandage, 3” Compressed Gauze, HyFin Chest Seal (vented), 14ga 3.25 Chest Decompression Needle, Nasopharyngeal 28fr w/ 550 cord, Emergency Blanket (52”x84”), Pair Nitrile Gloves, Casualty Care Card and Field Instruction Card.

NSW ADVANCED BAT TLE

CAT Tourniquet, Combat Gauze, OSS Combat Compression Bandage, 3’ Compressed Gauze, HyFin Chest Seal (vented) 14ga 3.25 Chest Decompression Needle, Nasopharyngeal 28fr w/ 550 cord, Pair of Nitrile Gloves

T R A U M A K I T C A R R Y P O U C H E S

E M E R G E N C Y T R A U M A K I T S


Store and transport your body armor with U.S. Armor’s durable carry bags. Built to conveniently and securely haul your ballistic wear and gear, carry bags are available in a various sizes and

U.S. Armor makes a variety of custom ID Patches constructed of woven nylon and VELCRO® backing for quick attachment and removal. Stock inventory is also available offering a wide

structures with applicable features such as ID windows, additional pockets and dual handles to support the requirements of its contents.

selection of standard agency titles such as “POLICE,” “SHERIFF,” and team designations such as “Gang Enforcement Team.”


ID PATCHES


CARRY BAGS

BAG DIMENSIONS DESCRIPTION

SM. CONCEALABLE 20 ” X 25 ” Small Concealable Vest Carry Bag

MED. CONCEALABLE 23” X 25” Medium Concealable Vest Carry Bag

LRG. CONCEALABLE 26” X 25” Large Concealable Vest Carry Bag

LRG. TACT ICAL 26” X 25” Large Tactical Vest Carry Bag

HELMET 12.5” X 11” Helmet Carr y Bag

BAG DIMENSIONS DESCRIPTION

SM. CUSTOM 1 .5 ” X 4 .5 ” Custom Embroidered Patch Small

LRG. CUSTOM 4” X 10” Custom Embroidered Patch Large

SM. STOCK 1.5” X 4.5” Stock Embroidered Patch Small

LRG. STOCK 4” X 10” Stock Embroidered Patch Large

L IMITED WARRANT Y—U.S. Armor extends the following limited warranty for all U.S. Armor Bullet Resistant Vests and Ballistic Hard Armor Plates. Some states do not allow limitations on how long an implied warranty can last and/or do not allow the exclusion or limitation of consequential damages. For the purchases governed by the laws of those states, the following limitations may not apply. Thiswarranty gives you specific legal rights; however, you may also have other rights which will vary from state to state.

PERMANENT HANDWASHABLE COVERS—U.S. Armor’s Hand Washable Permanent Covers are fully warranted to be free from defects and workmanship for (36) thirty-six months from date of issue.

60 DAY GUARANTEED F I T—If you are not fully satisfied with your U.S. Armor tailor-made vest, return it within (60) sixty days of manufacturing date for either free alterations or a full refund excluding any freight charges.

BALL IST IC PANELS& HARD ARMOR PL ATES—U.S. Armor Ballistic Panels are warranted to be free from defects inmaterials and workmanship for (60) sixty months. All returns are performed on a prorated basis from the date of issue excluding any freight charges.

REMOVABLE MACHINEWASHABLE OUTER CARRIERS—U.S. Armor’s Removable Machine-Washable Carriers are fully warranted to be free from defects and workmanship for (18) eighteen months. All returns are performed on a prorated basis from the date of issue excluding any freight charges.

L IMITAT IONS—This warranty is void if the vest is altered in any way, if material used in conjunction with U.S. Armor’s vests is manufactured by another companynot approved by U.S. Armor, if proper care and washing instructions supplied with the vest are not followed or if the vest is subjected to abnormal use. If questions arise pertaining to care/maintenance of your vest as subject to this warranty, please contact U.S. Armor for assistance.

WARRANT Y PROGRAM

U . S . A R M O R C O R P O R A T I O N1 0 7 1 5 B L O O M F I E L D A V E .

S A N T A F E S P R I N G S , C A 9 0 6 7 0 , U S A

T O L L F R E E : 8 0 0 . 4 4 3 . 9 7 9 8

L O C A L : 5 6 2 . 2 0 7 . 4 2 4 0

T O L L F R E E F A X : 8 0 0 . 8 0 0 . 5 4 9 0

L O C A L F A X : 5 6 2 . 2 0 7 . 4 2 3 8

C U S T O M E R S E R V I C E

C U S T O M E R S E R V I C E @ U S A R M O R . C O M

S A L E S I N Q U I R I E S

S A L E S @ U S A R M O R . C O M

N E W O R D E R S

O R D E R S @ U S A R M O R . C O M

I S O 9 0 0 1 : 2 0 1 5 — CERT IF IED QUALIT Y MANAGEMENT SYSTEM AND

I S O 1 4 0 0 1 : 2 0 1 5 — CERT IF IED ENVIRONMENTAL MANAGEMENT SYSTEM

VERSION - 12.13.2019

U S A R M O R . C O M

Y O U ’ L L W E A R I T . TM

Documents

MASTER CATALOG - U.S. Armor | Custom Fit Body Armor · 2020. 2. 20. · nij stab standard - 0115.00 threat level test bullet bullet wt. e.c.v.* new armor velocity max bfs iia 9mm